{"title":"Speed \u0026 Temperature Sensors","description":"","products":[{"product_id":"qbp712716","title":"Blue Sea Systems High Temp Temperature Sensor, IP65, -40°F to 300°F, 18 in Wire","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1821 is a high-temperature sensor for monitoring raw water exhaust temperature on a boat without drilling into the pipe. It mounts on the outside of the surface being monitored and works with Blue Sea Systems products that accept a temperature sensor, including the P12 Charger, M2 OLED, and Mini OLED meters.\u003c\/p\u003e\u003cp\u003eIts sensing range runs from -40°F to 300°F (-40°C to 150°C), which makes it useful anywhere a standard low-temperature probe would not be enough. The sensor has an 18-inch lead for short routing runs near the monitored point, and its IP65 construction is suited to wet onboard spaces that see spray and washdown water, but not full submersion.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMeasures from -40°F to 300°F (-40°C to 150°C) for higher-heat monitoring points such as raw water exhaust\u003c\/li\u003e\n\u003cli\u003eExternal surface-mount setup lets you monitor exhaust temperature without drilling into the hose or pipe\u003c\/li\u003e\n\u003cli\u003eCompatible with Blue Sea Systems products that require a temperature sensor, including P12 Charger, M2 OLED, and Mini OLED meters\u003c\/li\u003e\n\u003cli\u003eIP65-rated body handles water spray and washdown conditions, but it is not a submersible sensor\u003c\/li\u003e\n\u003cli\u003e18-inch lead helps with short, tidy cable runs in engine spaces and nearby monitoring locations\u003c\/li\u003e\n\u003cli\u003eNon-polarized leads connect in either order, which keeps wiring straightforward during installation\u003c\/li\u003e\n\u003cli\u003eMultiple mounting options, including included double-sided tape, a through-hole for a #8 screw, or a hose clamp on the outside of a pipe\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis sensor is meant to read temperature from the outside of the component you are watching, not from inside the fluid path. On a raw water exhaust run, it can be strapped to the outside of the pipe or hose so you can track temperature changes without opening the system.\u003c\/p\u003e\u003cp\u003eFor a fixed mount, the through-hole accepts a #8 screw. For pipe mounting, a hose clamp can be used to hold the sensor against the outside surface. The included double-sided tape is useful on a clean, dry mounting point when a clamp or screw is not the better fit.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats that already use a Blue Sea Systems charger or display with a temperature-sensor input and need a remote sensor at the engine space or another hot surface. Before ordering, check that the 18-inch lead will comfortably reach the connection point on your charger or meter, especially if the display is mounted away from the area being monitored.\u003c\/p\u003e\u003cp\u003eBecause it is a high-temperature, non-submersible sensor, it fits dry-contact surface sensing better than applications where the probe needs to sit underwater or inside a tank. That makes it especially practical for engine-room monitoring where spray, heat, and vibration are part of normal use.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTemperature sensor\u003c\/li\u003e\n\u003cli\u003eDouble-sided tape\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023077077173,"sku":"QBP712716","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329921_qbp712716.jpg?v=1780191667"},{"product_id":"qbp512413","title":"Victron Energy Temperature Sensor","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy Temperature Sensor is a Victron accessory for adding temperature input to compatible battery monitoring, inverter\/charger and GX device installations. It is used in marine electrical systems where battery temperature matters, especially on boats with battery banks installed near engine spaces, under berths, in lockers or in other areas where heat can change through the day.\u003c\/p\u003e\u003cp\u003eThis product range is offered in two compatibility versions: one for BMV-712 Smart and BMV-702 battery monitors, and one for Quattro, MultiPlus and GX device systems. The BMV version measures main battery temperature for charging optimization and high or low temperature alarm settings on compatible monitors.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAvailable in two Victron compatibility versions: one for BMV-712 Smart and BMV-702 battery monitors, and one for Quattro, MultiPlus and GX devices.\u003c\/li\u003e\n\u003cli\u003eAdds temperature data to compatible Victron equipment so charging and monitoring can account for actual battery conditions.\u003c\/li\u003e\n\u003cli\u003eBMV version supports main battery temperature measurement and high and low temperature alarm settings through compatible BMV monitors.\u003c\/li\u003e\n\u003cli\u003eQuattro version is used with Quattro systems and is also listed for MultiPlus and GX device installations.\u003c\/li\u003e\n\u003cli\u003eUseful on boats where battery temperature can change during shore charging, alternator charging, inverter use or long periods in a warm equipment space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Victron Energy Temperature Sensor is offered in multiple configurations so the sensor matches the Victron equipment already installed on board.\u003c\/p\u003e\u003cp\u003eThe versions differ by the Victron device family they connect to. Both are temperature sensors for Victron electrical systems, but the connection target is different and should be matched to the monitor, inverter\/charger or GX device in the installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eASS000100000: For BMV-712. This version is the BMV battery monitor sensor and is also used with BMV-702, giving the monitor battery temperature data for charging optimization and temperature alarms.\u003c\/li\u003e\n\u003cli\u003eASS000001000: For Quattro. This version is the sensor used with Quattro systems and is also listed for MultiPlus and GX device installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, match the variant to the Victron product in the boat rather than selecting by appearance alone. A BMV battery monitor installation needs the BMV version, while a Quattro, MultiPlus or GX-based installation uses the version made for that device family.\u003c\/p\u003e\u003cp\u003eThis is not a water-temperature sensor for hull fittings, transducers or instrument displays. It belongs in the vessel electrical system, where battery and equipment temperature information helps compatible Victron devices make better use of charging and monitoring data.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eInstall the sensor as part of the Victron system layout, keeping the cable run protected from chafe, strain and service-area movement. On a boat, the most useful location is normally close to the battery or equipment point being monitored, with the wiring kept clear of hot exhaust parts, sharp edges and wet bilge areas.\u003c\/p\u003e\u003cp\u003eThis is a practical match for cruising boats, fishing boats and sailboats that already rely on Victron monitoring or inverter\/charger equipment and need temperature data included in the electrical picture. It is especially useful where battery charging happens from more than one source, such as shore power, solar, alternator charging or generator-backed AC charging.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"BMV-712","offer_id":52023115972789,"sku":"QBP512413-V0","price":31.45,"currency_code":"USD","in_stock":true},{"title":"Quattro","offer_id":52023116005557,"sku":"QBP512413-V8","price":20.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335774_qbp512413.jpg?v=1780191728"},{"product_id":"qbp174202","title":"Furuno - 235DST-PWE Plastic TM, Digital Depth, Speed \u0026 Temp Sensor (7-Pin)","description":"\u003ch4\u003eUnlock the Depths with Furuno 235DST-PWE\u003c\/h4\u003e \u003cp\u003eDive into the world of marine technology with the Furuno 235DST-PWE Plastic TM, Digital Depth, Speed \u0026amp; Temp Sensor. This versatile sensor is a game-changer for boating enthusiasts, offering a range of features that will elevate your on-water experience.\u003c\/p\u003e \u003ch4\u003eGeneral Description\u003c\/h4\u003e \u003cp\u003eThe Furuno 235DST-PWE is a top-of-the-line marine sensor designed to provide accurate and reliable data on depth, speed, and water temperature. Crafted with precision and durability in mind, it's perfect for both recreational and professional boaters.\u003c\/p\u003e \u003ch4\u003eTechnical Specifications\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e7-Pin connector for seamless integration\u003c\/li\u003e \u003cli\u003eDigital depth sensing for precise underwater data\u003c\/li\u003e \u003cli\u003eSpeed measurement capabilities for efficient navigation\u003c\/li\u003e \u003cli\u003eTemperature sensor for monitoring water conditions\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eProduct Dimensions\u003c\/h4\u003e \u003cp\u003eThe Furuno 235DST-PWE is compact and easy to install, with dimensions designed to fit seamlessly into your vessel's setup. Its sleek design ensures minimal disruption to your boat's hydrodynamics.\u003c\/p\u003e \u003ch4\u003eColor Temperature (if applicable)\u003c\/h4\u003e \u003cp\u003eWhile color temperature isn't applicable to this product, its performance shines in any maritime environment, from icy arctic waters to tropical seas.\u003c\/p\u003e \u003ch4\u003eFinishes\u003c\/h4\u003e \u003cp\u003eThe sensor boasts a robust plastic TM finish that can withstand the harshest marine conditions, ensuring longevity and reliability in your adventures.\u003c\/p\u003e \u003ch4\u003eHighlights\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eAccurate Depth Readings: Dive confidently with precise depth information at your fingertips.\u003c\/li\u003e \u003cli\u003eSpeed Monitoring: Navigate efficiently with real-time speed data for improved control.\u003c\/li\u003e \u003cli\u003eTemperature Insights: Stay informed about water conditions for a safe and comfortable voyage.\u003c\/li\u003e \u003cli\u003eDurable Construction: Built to endure the rigors of the open sea, this sensor is your trusty companion for years to come.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eVariations\u003c\/h4\u003e \u003cp\u003eThe Furuno 235DST-PWE is available in various configurations to meet your specific needs. Choose the perfect fit for your vessel:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eStandard Package: Includes the sensor with all its essential features.\u003c\/li\u003e \u003cli\u003eAdvanced Package: Enhance your boating experience with additional data output options.\u003c\/li\u003e \u003cli\u003eProfessional Package: For those who demand the utmost in precision and performance, this package offers advanced capabilities for marine enthusiasts and experts alike.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWhichever variation you choose, the Furuno 235DST-PWE will be your trusted companion on your maritime journeys, providing invaluable data for a safe and enjoyable voyage.\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023161749685,"sku":"QBP174202","price":530.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1210563_qbp174202.jpg?v=1763251338"},{"product_id":"qbp418647","title":"Navico - Temperature Sensor Thru-Hull","description":"\u003ch4\u003eDiscover the Depths: EP-80R Temperature Sensor\u003c\/h4\u003e \u003cp\u003eUnveiling the next evolution in marine technology, the EP-80R Temperature Sensor is designed to provide precise temperature readings, enhancing your maritime experiences. Originally a successor to the EP-80, this state-of-the-art device is not just limited to measuring water temperature. With its versatile configuration, you can adapt its functionality based on your unique requirements, offering an array of temperature types that can be captured.\u003c\/p\u003e \u003ch4\u003eAdaptable Tech: Configuration Possibilities\u003c\/h4\u003e \u003cp\u003eThe standout feature of this sensor is its ability to be reconfigured to capture various temperature types. Whether you're keen on gauging the warmth of the cabin or the chill of the bait well, the EP-80R delivers. However, do note that the control and configuration is exclusively through Navico MFDs.\u003c\/p\u003e \u003ch4\u003eKey Highlights\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eUpgraded successor to the EP-80\u003c\/li\u003e \u003cli\u003eMulti-functional temperature readings\u003c\/li\u003e \u003cli\u003eExclusive configuration through Navico MFDs\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eA Spectrum of Temperatures: Variations in Capture\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eOutside\u003c\/li\u003e \u003cli\u003eInside\u003c\/li\u003e \u003cli\u003eEngine Room\u003c\/li\u003e \u003cli\u003eCabin\u003c\/li\u003e \u003cli\u003eLive Well\u003c\/li\u003e \u003cli\u003eBait Well\u003c\/li\u003e \u003cli\u003eRefrigeration\u003c\/li\u003e \u003cli\u003eHeating System\u003c\/li\u003e \u003c\/ul\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":52023163191477,"sku":"QBP418647","price":107.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1210607_qbp418647.jpg?v=1763251372"},{"product_id":"qbp864267","title":"Navico - Speed Sensor, Transom Mount","description":"\u003ch4\u003eNavigate with Precision: Transom Mount Speed Sensor\u003c\/h4\u003e \u003cp\u003eDive deep into the realm of marine navigation with our state-of-the-art Transom Mount Speed Sensor. Designed with precision and functionality in mind, it ensures accurate readings even at slower speeds, providing sailors and marine enthusiasts with reliable data on their journeys.\u003c\/p\u003e \u003ch4\u003eExceptional Features that Stand Out\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eReplaces the EP-70 model for enhanced efficiency.\u003c\/li\u003e \u003cli\u003eCapable of outputting precise speed through water.\u003c\/li\u003e \u003cli\u003eTransom-mount design ensures ease of installation and utilization.\u003c\/li\u003e \u003cli\u003ePerfectly crafted for those slow, trolling speeds where GPS might falter.\u003c\/li\u003e \u003cli\u003eUnique capability to share paddle wheel speed with any networked display, stepping ahead of the conventional sonar-based sensors.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eA Peek into Technical Specifications\u003c\/h4\u003e \u003cp\u003eEquipped with a 3.1 m (10ft) cable and a Micro-C connector, our Transom Mount Speed Sensor promises seamless connection and data transmission. Its transom-mount paddle wheel technology is both innovative and dependable, ensuring that you receive the best speed readings at all times.\u003c\/p\u003e \u003ch4\u003eQuick Recap: Product Highlights\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eEfficient replacement for the EP-70 model\u003c\/li\u003e \u003cli\u003eTransom-mount design for accurate speed measurements\u003c\/li\u003e \u003cli\u003eUnique capability to share speed data across networked displays\u003c\/li\u003e \u003c\/ul\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":52023163224245,"sku":"QBP864267","price":119.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1210608_qbp864267.jpg?v=1763251373"},{"product_id":"qbp717975","title":"Mastervolt - Temperature Sensor - For PowerCombi","description":"\u003ch4\u003eOptimize Your PowerCombi Performance with Mastervolt Temperature Sensor\u003c\/h4\u003e \u003cp\u003eEnsure the optimal performance and longevity of your PowerCombi with the Mastervolt Temperature Sensor, designed specifically to enhance your system's efficiency. This crucial component allows for precise monitoring of temperature, enabling your PowerCombi to adapt its operation for maximum efficiency and safety. The integration of this sensor into your system ensures that your inverter\/charger operates within safe temperature ranges, preventing overheating and potential damage.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned exclusively for compatibility with Mastervolt PowerCombi systems.\u003c\/li\u003e \u003cli\u003eEnables precise temperature monitoring for optimal performance.\u003c\/li\u003e \u003cli\u003eHelps to prevent overheating by adjusting inverter\/charger operation based on temperature readings.\u003c\/li\u003e \u003cli\u003eEssential for maintaining the longevity and reliability of your PowerCombi unit.\u003c\/li\u003e \u003cli\u003eEasy to install, ensuring a seamless integration into your existing setup.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Precision for Enhanced Safety\u003c\/h4\u003e \u003cp\u003eThe Mastervolt Temperature Sensor for PowerCombi embodies technical precision, providing real-time temperature data to safeguard your system against the risks of overheating. With this sensor, you can rest assured that your inverter\/charger is operating efficiently, without compromising on safety or performance.\u003c\/p\u003e \u003ch4\u003eReliable Operation in Demanding Conditions\u003c\/h4\u003e \u003cp\u003eDesigned to withstand the harsh conditions often encountered in marine and mobile environments, the Mastervolt Temperature Sensor ensures that your PowerCombi continues to operate reliably, no matter the external temperature fluctuations. Its robust design guarantees that you have accurate temperature data at all times, allowing for adjustments as needed to protect your system.\u003c\/p\u003e \u003cp\u003eWith the Mastervolt Temperature Sensor for PowerCombi, you're not just adding a component; you're enhancing the performance and safety of your entire power system. It's an indispensable tool for anyone looking to ensure their system runs smoothly, efficiently, and safely, extending the life of your PowerCombi and providing peace of mind.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":52023385424053,"sku":"QBP717975","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1215174_qbp717975.jpg?v=1763254048"},{"product_id":"qbp643765","title":"Mastervolt - Battery Temperature Sensor - 6M","description":"\u003ch4\u003eOptimize Battery Performance with Mastervolt Battery Temperature Sensor\u003c\/h4\u003e \u003cp\u003eEnsure your marine battery operates at its peak with the Mastervolt Battery Temperature Sensor. This essential accessory, included with every Mastervolt battery charger, is designed to precisely monitor your battery's temperature during the charging process. Accurate temperature readings are critical for optimizing charging efficiency and prolonging battery life, preventing overheating and ensuring that your battery is charged safely and effectively. The 6-meter length provides ample flexibility for installation in various configurations, making it an ideal solution for any marine setup.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAccurately monitors battery temperature to optimize charging efficiency.\u003c\/li\u003e \u003cli\u003eHelps prolong battery life by preventing overheating during charging.\u003c\/li\u003e \u003cli\u003eIncluded with every Mastervolt battery charger for comprehensive battery care.\u003c\/li\u003e \u003cli\u003e6-meter length offers flexibility for installation in diverse setups.\u003c\/li\u003e \u003cli\u003eEssential for maintaining battery health and ensuring safe charging conditions.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Specifications for Advanced Battery Care\u003c\/h4\u003e \u003cp\u003eThe Mastervolt Battery Temperature Sensor is a testament to Mastervolt's commitment to advanced battery management solutions. It seamlessly integrates with Mastervolt battery chargers, providing real-time temperature data to adjust charging parameters as needed. This proactive approach to battery care not only extends the lifespan of your marine batteries but also enhances your vessel's overall energy efficiency.\u003c\/p\u003e \u003ch4\u003eDesigned for the Marine Environment\u003c\/h4\u003e \u003cp\u003eMade to withstand the harsh marine environment, this temperature sensor is a small yet powerful component of your vessel's electrical system. Its durable design ensures reliable performance, giving you peace of mind that your batteries are protected against the risks of improper charging temperatures. With easy installation and Mastervolt's renowned quality, it's an investment in the longevity and reliability of your marine power supply.\u003c\/p\u003e \u003ch4\u003eEssential Tool for Intelligent Charging\u003c\/h4\u003e \u003cp\u003eThe Mastervolt Battery Temperature Sensor is not just an accessory; it's an essential tool for intelligent battery management. By allowing your Mastervolt charger to automatically adjust the charging process based on precise temperature readings,\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":52023396368565,"sku":"QBP643765","price":84.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1215429_qbp643765.jpg?v=1763254170"},{"product_id":"qbp732324","title":"Xantrex - Battery Temperature Sensor (BTS)","description":"\u003ch4\u003eEnhance Your Marine Voyage with the Xantrex BTS for Optimal Battery Performance\u003c\/h4\u003e \u003cp\u003eEmbark on your marine adventures with confidence, thanks to the Xantrex Battery Temperature Sensor (BTS) for the Freedom 458 Series. Designed to elevate your marine battery management system, this essential accessory ensures your battery is always charged optimally, adjusting for temperature variations. Whether navigating the tranquil waters of a serene lake or steering through the demanding conditions of the open sea, the Xantrex BTS becomes your reliable partner in maintaining battery health and efficiency. Its 15-foot cable and easy terminal or side-mount installation make it a versatile choice for any marine setup.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAutomatically adjusts charging voltage based on battery temperature\u003c\/li\u003e \u003cli\u003e15 ft (4.6 m) communication cable for flexible installation options\u003c\/li\u003e \u003cli\u003eCompatible with the Freedom 458 Series, enhancing its versatility\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Specifications: Engineered for the Sea\u003c\/h4\u003e \u003cp\u003eDive into the specifics that make the Xantrex Battery Temperature Sensor a must-have for your marine journey. It's meticulously designed for the Freedom 458 inverter\/charger series, offering a seamless integration and superior performance. The sensor's ability to adjust voltage based on ambient temperature ensures your battery achieves a full charge, optimizing your time on the water.\u003c\/p\u003e \u003ch4\u003eSailing with Precision: Product Dimensions\u003c\/h4\u003e \u003cp\u003eCompact yet powerful, the Xantrex BTS is engineered to fit seamlessly within your marine setup. Its discreet size allows for unobtrusive installation, ensuring it does not interfere with your vessel’s aesthetics or functionality.\u003c\/p\u003e \u003ch4\u003eSeamless Integration: Variations for Versatility\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e76-0022-00 for the Freedom 458 Series: Tailored for a perfect fit with your Freedom 458 setup.\u003c\/li\u003e \u003cli\u003e809-0946 for the Freedom SW Series: Expands the compatibility, ensuring that users of the Freedom SW series can also enhance their battery management.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Xantrex","offers":[{"title":"Freedom 458 Series","offer_id":52023475634357,"sku":"QBP732324-V0","price":56.47,"currency_code":"USD","in_stock":true},{"title":"Freedom SW Series","offer_id":52023475667125,"sku":"QBP732324-V4","price":33.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1218061_qbp732324.jpg?v=1763255106"},{"product_id":"qbp343836","title":"ProMariner - ProNautic 1260P Remote Temperature Sensor Probe","description":"\u003ch4\u003eOptimize Your Charging with Precision: ProMariner ProNautic 1260P Remote Temperature Sensor Probe\u003c\/h4\u003e \u003cp\u003e\u003cstrong\u003eEnhance your marine battery charging efficiency with the ProMariner ProNautic 1260P Remote Temperature Sensor Probe.\u003c\/strong\u003e Designed as a perfect replacement for the standard temperature probe supplied with the ProNauticP series chargers, this remote temperature sensor ensures your charging process is adapted to the precise conditions of your marine environment. By monitoring the battery's temperature and adjusting the charge accordingly, it helps maintain optimal battery health and performance. The sensor's plug-and-play functionality makes it an effortless upgrade, providing peace of mind for sailors and marine enthusiasts alike.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features for Seamless Marine Integration:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eEffortless plug-and-play functionality for easy installation and operation\u003c\/li\u003e \u003cli\u003eAutomatic adjustment of charging parameters based on battery temperature\u003c\/li\u003e \u003cli\u003eEnsures optimal battery health and longevity by preventing overheating or undercharging\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Specifications: Tailored for Marine Excellence\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eConnection (Battery End):\u003c\/strong\u003e Durable ring terminal for a secure connection\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eConnection (Charger End):\u003c\/strong\u003e RJ45 style connector for easy attachment to the charger\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 10 feet (3 meters), providing flexibility in sensor placement\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWith the ProMariner ProNautic 1260P Remote Temperature Sensor Probe, you can take your battery charging to the next level of precision and reliability. Whether you're exploring coastal waters or sailing the high seas, ensure your vessel's battery is charged efficiently and safely, no matter the conditions.\u003c\/p\u003e","brand":"ProMariner","offers":[{"title":"Default Title","offer_id":52023477895349,"sku":"QBP343836","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1218123_qbp343836.jpg?v=1763255130"},{"product_id":"qbp258091","title":"Maretron - WSO200-01 Ultrasonic Wind\/Weather Station","description":"\u003ch4\u003eAdvanced Ultrasonic Wind and Weather Monitoring\u003c\/h4\u003e\u003cp\u003eThe Maretron WSO200-01 is a cutting-edge ultrasonic wind and weather station designed for marine applications. Engineered for accuracy and durability, this second-generation model provides precise real-time data on wind speed and direction, air temperature, barometric pressure, and relative humidity. Unlike traditional mechanical anemometers, the WSO200 has no moving parts, eliminating common issues like wear, salt buildup, and mechanical failure.\u003c\/p\u003e\u003cp\u003eIdeal for both sailboats and powerboats, the WSO200 ensures reliable performance even under challenging conditions, including vessel tilts of up to 30°. Whether navigating through turbulent seas or monitoring weather conditions at anchor, this robust system delivers unparalleled precision and dependability.\u003c\/p\u003e\u003ch4\u003eHigh-Precision Marine-Grade Technology\u003c\/h4\u003e\u003cp\u003eThe WSO200 utilizes six ultrasonic sensors arranged in a delta configuration, significantly enhancing signal accuracy while reducing noise interference. This advanced design guarantees superior performance without the need for maintenance or calibration. Additionally, the user-replaceable humidity sensor allows for easy servicing without compromising functionality.\u003c\/p\u003e\u003ch4\u003eNMEA 2000® Integration for Seamless Data Display\u003c\/h4\u003e\u003cp\u003eAs a fully NMEA 2000®-certified device, the WSO200 seamlessly integrates with Maretron’s DSM Series displays, TSM Series touchscreen units, and any device running N2KView® V3 software. Users can effortlessly access and analyze weather data through their onboard network, making the WSO200 a truly plug-and-play solution.\u003c\/p\u003e\u003cp\u003eFor enhanced situational awareness, combine the WSO200 with additional Maretron sensors, such as the DST110 triducer, GPS200 receiver, or SSC300 compass, to obtain vessel-referenced wind speed, direction, and ground-referenced data.\u003c\/p\u003e\u003ch4\u003eKey Features and Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltrasonic wind measurement\u003c\/strong\u003e – No moving parts to wear out or require maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-function weather monitoring\u003c\/strong\u003e – Measures wind speed, direction, air temperature, barometric pressure, and humidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable in dynamic conditions\u003c\/strong\u003e – Provides accurate readings even when the vessel is heeled or moving through rough waters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser-replaceable humidity sensor\u003c\/strong\u003e – Ensures long-term usability and easy maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow power consumption\u003c\/strong\u003e – Optimized for efficiency in marine applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior durability\u003c\/strong\u003e – Resistant to salt, dirt buildup, and environmental wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof to IP67 standards\u003c\/strong\u003e – Built for harsh marine environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cp\u003eThe WSO200 is designed for standard marine installations and mounts easily on a \u003cstrong\u003e1\"-14 Standard Marine Mount\u003c\/strong\u003e, ensuring secure placement on a variety of vessels.\u003c\/p\u003e\u003ch4\u003eSeamless Integration with Maretron Systems\u003c\/h4\u003e\u003cp\u003eWhen paired with Maretron’s suite of navigation and monitoring devices, the WSO200 enhances vessel data collection and decision-making, providing mariners with comprehensive weather insights for safer and more efficient sailing.\u003c\/p\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":52023739285685,"sku":"QBP258091","price":645.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1226397_qbp258091.jpg?v=1763258160"},{"product_id":"qbp140671","title":"BEP Marine - Temperature Sensor - For Smart Battery Hub","description":"\u003ch4\u003eAdvanced Temperature Monitoring for Marine Battery Systems\u003c\/h4\u003e\u003cp\u003eThe \u003cstrong\u003eBEP Marine Temperature Sensor for Smart Battery Hub\u003c\/strong\u003e is designed to enhance the monitoring capabilities of your vessel’s battery management system. Specifically crafted for use with the \u003cstrong\u003eBEP Marine Smart Battery Hub (SBH)\u003c\/strong\u003e, this sensor provides real-time temperature readings, ensuring optimal battery performance and longevity. By continuously monitoring temperature variations, the sensor helps prevent overheating, enhances safety, and contributes to efficient power distribution across multiple battery banks.\u003c\/p\u003e\u003ch4\u003eSeamless Integration with the Smart Battery Hub\u003c\/h4\u003e\u003cp\u003eDesigned to work seamlessly with the \u003cstrong\u003eSmart Battery Hub\u003c\/strong\u003e, this temperature sensor integrates directly into the system’s monitoring network. Through \u003cstrong\u003eNMEA 2000 connectivity\u003c\/strong\u003e, the sensor transmits essential temperature data, enabling boat operators to keep track of battery health via multi-function displays.\u003c\/p\u003e\u003ch4\u003eRobust and Marine-Ready Design\u003c\/h4\u003e\u003cp\u003eBuilt for the demanding marine environment, the sensor is housed in a \u003cstrong\u003erugged, ignition-protected, and waterproof (IPX7-rated) enclosure\u003c\/strong\u003e, ensuring durability and long-lasting performance in harsh conditions. Whether installed on vessels with \u003cstrong\u003eoutboard engines, sterndrives, or multiple inboard engines\u003c\/strong\u003e, this sensor supports a variety of configurations to suit different battery management needs.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDesigned for use with the \u003cstrong\u003eBEP Marine Smart Battery Hub (SBH)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal-time temperature monitoring\u003c\/strong\u003e to optimize battery performance and safety\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless integration via NMEA 2000\u003c\/strong\u003e for easy data transmission to multi-function displays\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX7-rated enclosure\u003c\/strong\u003e for superior waterproof and ignition protection\u003c\/li\u003e\n\u003cli\u003eSupports multi-engine vessels and adaptable to various battery configurations\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis sensor is an essential addition to any vessel equipped with the \u003cstrong\u003eBEP Marine Smart Battery Hub\u003c\/strong\u003e, offering precise temperature monitoring to ensure a safer and more efficient power system at sea.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":52023747018933,"sku":"QBP140671","price":101.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1226760_qbp140671.jpg?v=1763258229"},{"product_id":"qbp634846","title":"Airmar - H2183 Heading Sensor with Solid State Compass","description":"\u003ch4\u003eAdvanced Three-Axis Heading Accuracy\u003c\/h4\u003e\u003cp\u003eThe Airmar H2183 Heading Sensor is designed for mariners who require precise and reliable heading data, whether offshore fishing, cruising, or navigating through challenging waters. Its solid-state, three-axis compass, combined with advanced sensors and software, ensures unparalleled accuracy. Unlike conventional compasses, the H2183 maintains an impressive ±2° dynamic accuracy even in harsh conditions, such as steep heeling, hard turns, and rough seas.\u003c\/p\u003e\u003ch4\u003eSuperior Performance in Motion\u003c\/h4\u003e\u003cp\u003eEquipped with a three-axis rate gyro and a three-axis accelerometer, the H2183 continuously integrates heading data, ensuring accuracy even when the vessel is pitching and rolling up to 30°. This capability makes it an essential component for interfacing with autopilots, chart plotters, and radar systems, providing stable and dependable navigation data.\u003c\/p\u003e\u003ch4\u003eVersatile and Easy Installation\u003c\/h4\u003e\u003cp\u003eThe innovative circular design of the H2183 allows for effortless mounting and alignment on any angled bulkhead, ensuring a secure fit in a variety of marine applications. Designed for simultaneous use with both NMEA 0183 and NMEA 2000® devices, this heading sensor offers flexibility and compatibility with modern marine electronics.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeading Accuracy (Static):\u003c\/strong\u003e ±1°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeading Accuracy (Dynamic):\u003c\/strong\u003e ±2°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor Type:\u003c\/strong\u003e Solid-state, no moving parts\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cstrong\u003eMeasurement Capabilities:\u003c\/strong\u003eThree-axis compass\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eThree-axis accelerometer\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eThree-axis rate gyro\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e NMEA 0183 and NMEA 2000®\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Design:\u003c\/strong\u003e Built for marine environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaintains precise heading even under dynamic motion\u003c\/li\u003e\n\u003cli\u003eThree-axis stabilization for superior accuracy\u003c\/li\u003e\n\u003cli\u003eCompact circular design for easy mounting\u003c\/li\u003e\n\u003cli\u003eCompatible with autopilots, chart plotters, and radar systems\u003c\/li\u003e\n\u003cli\u003eSimultaneous support for NMEA 0183 and NMEA 2000®\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":52023777263797,"sku":"QBP634846","price":800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1227253_qbp634846.png?v=1763258382"},{"product_id":"qbp464035","title":"Furuno - 235DST-PSE Low Profile Plastic Thru-Hull Depth\/Speed \u0026 Temp NMEA0183 Smart Sensor","description":"\u003ch4\u003eAdvanced Marine Sensor for Depth, Speed, and Temperature Monitoring\u003c\/h4\u003e\u003cp\u003eThe Furuno 235DST-PSE is a high-performance, low-profile plastic thru-hull sensor designed for precise depth, speed, and temperature measurements. Engineered for seamless integration into marine navigation systems, this smart sensor provides reliable and accurate data, making it an essential addition to any vessel. The compact and durable design ensures minimal drag while delivering superior performance in various marine conditions.\u003c\/p\u003e\u003ch4\u003eHigh-Precision Technical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePower Output: 200 Watts\u003c\/li\u003e\n\u003cli\u003eOperating Frequency: 235 kHz\u003c\/li\u003e\n\u003cli\u003eSensor Type: Plastic Thru-Hull\u003c\/li\u003e\n\u003cli\u003eMeasurement Capabilities: Depth, Speed, and Temperature\u003c\/li\u003e\n\u003cli\u003eTemperature Accuracy: ±1 Degree\u003c\/li\u003e\n\u003cli\u003eCommunication Protocol: NMEA0183\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eDesigned for Seamless Installation\u003c\/h4\u003e\u003cp\u003eThe sensor includes a 10-meter cable with a 7-pin connector, allowing for straightforward integration with compatible marine systems. Its low-profile design minimizes resistance in the water, ensuring efficiency and reliability during navigation.\u003c\/p\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAccurate depth, speed, and temperature readings for enhanced navigation\u003c\/li\u003e\n\u003cli\u003eReliable ±1-degree temperature measurement for precise monitoring\u003c\/li\u003e\n\u003cli\u003eLow-profile thru-hull design reduces drag and maintains vessel efficiency\u003c\/li\u003e\n\u003cli\u003eDurable plastic construction for long-term performance in marine environments\u003c\/li\u003e\n\u003cli\u003eEasy connectivity with an included 10-meter cable and 7-pin connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Furuno 235DST-PSE smart sensor is a trusted solution for mariners seeking high-quality performance in a compact and efficient package.\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023777558709,"sku":"QBP464035","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1227266_qbp464035.jpg?v=1763258388"},{"product_id":"qbp103294","title":"Furuno - 235DT-MSE Low Profile Bronze Thru-Hull Depth \u0026 Temp NMEA0183 Smart Sensor","description":"\u003ch4\u003ePrecision Depth and Temperature Monitoring for Marine Applications\u003c\/h4\u003e\u003cp\u003eThe Furuno 235DT-MSE Low Profile Bronze Thru-Hull Sensor is a high-performance depth and temperature sensor designed for reliable marine navigation. Engineered with a durable bronze housing, this sensor ensures accurate readings while maintaining a low-profile design to reduce drag. Ideal for a wide range of vessels, it seamlessly integrates with NMEA0183 systems, providing real-time data to enhance situational awareness on the water.\u003c\/p\u003e\u003ch4\u003eReliable Depth and Temperature Sensing\u003c\/h4\u003e\u003cp\u003eEquipped with advanced sensing technology, the Furuno 235DT-MSE delivers precise depth measurements, allowing boaters to navigate confidently in varying marine conditions. The built-in temperature sensor offers accurate readings within ±1 degree, ensuring critical environmental data is always at hand.\u003c\/p\u003e\u003ch4\u003eHigh-Performance Technical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOperating Frequency: 235 kHz\u003c\/li\u003e\n\u003cli\u003ePower Output: 200 Watts\u003c\/li\u003e\n\u003cli\u003eConnectivity: NMEA0183 interface for seamless integration\u003c\/li\u003e\n\u003cli\u003eDepth and Temperature Accuracy: Temperature readings with a precision of ±1 degree\u003c\/li\u003e\n\u003cli\u003eCable: 10-meter cable with a 7-pin connector for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eDurable Bronze Thru-Hull Construction\u003c\/h4\u003e\u003cp\u003eThe robust bronze thru-hull housing is designed for long-lasting performance in harsh marine environments. Its corrosion-resistant build ensures durability, making it a reliable choice for both commercial and recreational vessels.\u003c\/p\u003e\u003ch4\u003eKey Highlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLow-profile design minimizes drag for enhanced vessel performance\u003c\/li\u003e\n\u003cli\u003eProvides real-time depth and temperature data for improved navigation\u003c\/li\u003e\n\u003cli\u003eEasy installation with a 10-meter cable and 7-pin connector\u003c\/li\u003e\n\u003cli\u003eNMEA0183 connectivity for broad compatibility with marine electronics\u003c\/li\u003e\n\u003cli\u003eRugged bronze construction ensures longevity in demanding conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis sensor is an excellent choice for boaters seeking dependable, accurate, and easy-to-integrate marine depth and temperature monitoring.\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023777591477,"sku":"QBP103294","price":665.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1227267_qbp103294.jpg?v=1763258389"},{"product_id":"qbp900591","title":"Furuno - 235-MSLF Long Stem Bronze Thru-Hull Depth\/Temp NMEA2000 Smart Sensor","description":"\u003ch4\u003eAdvanced Depth and Temperature Sensing for Marine Applications\u003c\/h4\u003e\u003cp\u003eThe Furuno 235-MSLF Long Stem Bronze Thru-Hull Depth\/Temp NMEA2000 Smart Sensor is a high-performance solution designed for precision depth and temperature readings in marine environments. Engineered with a durable bronze housing and a urethane acoustic window, this sensor ensures accurate and reliable data transmission. Its long stem design allows for installation in a variety of hull types, even those with a deadrise of up to 28° when paired with a fairing block.\u003c\/p\u003e\u003cp\u003eCompatible with the NMEA 2000 network, this smart sensor seamlessly integrates with onboard marine electronics, providing real-time data updates at a rate of one per second. Its robust construction and high sensitivity make it an ideal choice for boaters who require precise depth measurement and temperature monitoring.\u003c\/p\u003e\u003ch4\u003ePrecision Technical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Frequency:\u003c\/strong\u003e 235 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Depth Range:\u003c\/strong\u003e 0.5 m (1.6 ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth Range:\u003c\/strong\u003e Up to 180 m (590 ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData Update Rate:\u003c\/strong\u003e 1 per second\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Rating:\u003c\/strong\u003e 3 m (10 ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulse Rate:\u003c\/strong\u003e 20,000 p\/nm (5.6 Hz per knot)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Sensor Accuracy:\u003c\/strong\u003e ±0.5°C (±1.8°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Sensor Range:\u003c\/strong\u003e -10°C to 40°C (14°F to 104°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e 9 VDC to 16 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply Current:\u003c\/strong\u003e 200 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNMEA 2000 Load Equivalency Number (LEN):\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eReliable and Durable Construction\u003c\/h4\u003e\u003cp\u003eDesigned to withstand the harsh marine environment, the Furuno 235-MSLF features a rugged bronze housing that offers superior resistance to corrosion and impact. Its urethane acoustic window ensures optimal signal transmission while maintaining long-term durability in saltwater conditions.\u003c\/p\u003e\u003ch4\u003eInstallation and Compatibility\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Deadrise Compatibility:\u003c\/strong\u003e Up to 28° with fairing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter for Installation:\u003c\/strong\u003e 51 mm (2 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Cable Length:\u003c\/strong\u003e 6 m (20 ft)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eKey Features at a Glance\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHigh-precision depth and temperature measurements for marine navigation\u003c\/li\u003e\n\u003cli\u003eSeamless integration with NMEA 2000 networks for real-time data updates\u003c\/li\u003e\n\u003cli\u003eRugged bronze thru-hull housing ensures longevity and reliability\u003c\/li\u003e\n\u003cli\u003eSuitable for hulls with a deadrise up to 28° with fairing block\u003c\/li\u003e\n\u003cli\u003eQuick and accurate data refresh rate of one per second\u003c\/li\u003e\n\u003cli\u003eWide temperature sensor range for diverse marine conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Furuno smart sensor delivers cutting-edge performance and reliability, making it an excellent choice for serious mariners seeking precise and dependable depth and temperature data.\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023777624245,"sku":"QBP900591","price":650.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1227268_qbp900591.jpg?v=1763258390"},{"product_id":"qbp179653","title":"Furuno - AIR-044-103 Temperature NMEA Converter","description":"\u003ch4\u003eAnalog-to-NMEA0183 Temperature Data Conversion\u003c\/h4\u003e\u003cp\u003eThe Furuno AIR-044-103 Temperature NMEA Converter is designed to seamlessly integrate temperature data from a standalone sensor or a transducer's built-in sensor into an NMEA0183 data stream. This ensures compatibility with various marine devices, enabling real-time temperature monitoring essential for navigation, fishing, and other maritime applications. Built for reliability, it supports all Airmar transducers with integrated temperature sensors, ensuring a broad range of compatibility.\u003c\/p\u003e\u003ch4\u003eSeamless Integration with Furuno Equipment\u003c\/h4\u003e\u003cp\u003eEquipped with a 7-pin connector, the AIR-044-103 easily connects to Furuno systems, ensuring a straightforward and secure installation process. The converter's color-coded wiring simplifies setup, making it accessible for both professional installers and DIY marine enthusiasts.\u003c\/p\u003e\u003ch4\u003eKey Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eConverts analog temperature sensor data into NMEA0183 format\u003c\/li\u003e\n\u003cli\u003eCompatible with all Airmar transducers featuring an integrated temperature sensor\u003c\/li\u003e\n\u003cli\u003e7-pin connector for direct connection to Furuno equipment\u003c\/li\u003e\n\u003cli\u003eColor-coded wiring for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis compact and efficient converter enhances onboard data accuracy, ensuring precise temperature readings for improved marine navigation and environmental awareness.\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023777657013,"sku":"QBP179653","price":237.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1227269_qbp179653.jpg?v=1763258390"},{"product_id":"qbp743167","title":"Newmar Power - TCS 12\/24 Temp Sensor","description":"\u003ch4\u003ePrecision Temperature Compensation for Marine Power Systems\u003c\/h4\u003e\u003cp\u003eEnsure optimal performance and longevity of your marine batteries with the Newmar Power TCS 12\/24 Temperature Compensation Sensor. Designed for precision monitoring, this sensor adjusts charge voltage based on temperature fluctuations, safeguarding battery efficiency and extending overall lifespan. Ideal for marine applications, it provides reliable performance in varying environmental conditions.\u003c\/p\u003e\u003ch4\u003eKey Technical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eModel: TCS 12\/24\u003c\/li\u003e\n\u003cli\u003eCompensation Rate: -5 mV per cell\u003c\/li\u003e\n\u003cli\u003eCable Length: 25 feet\u003c\/li\u003e\n\u003cli\u003eDesigned for temperature-based voltage adjustments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEnhances battery performance by adjusting charge voltage to temperature variations\u003c\/li\u003e\n\u003cli\u003eHelps prevent overcharging and undercharging in fluctuating marine conditions\u003c\/li\u003e\n\u003cli\u003eLong 25-foot cable for flexible installation options\u003c\/li\u003e\n\u003cli\u003eDurable and reliable for continuous marine use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":52023796531381,"sku":"QBP743167","price":141.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1228161_qbp743167.jpg?v=1763258691"},{"product_id":"qbp695345","title":"Newmar Power - TP Temperature Probe","description":"\u003ch4\u003ePrecision Temperature Monitoring for Newmar Phase Three Chargers\u003c\/h4\u003e\u003cp\u003eThe Newmar Power TP Temperature Probe is a specialized accessory designed to optimize the performance and longevity of compatible Newmar Phase Three battery chargers. By precisely monitoring temperature changes, this probe ensures efficient charging adjustments, preventing overcharging and enhancing battery lifespan.\u003c\/p\u003e\u003ch4\u003eCompatibility with Newmar Phase Three Chargers\u003c\/h4\u003e\u003cp\u003eEngineered for seamless integration, the TP Temperature Compensation Probe is exclusively compatible with the following Newmar Phase Three charger models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePT-32-30\u003c\/li\u003e\n\u003cli\u003ePT-24-45F\u003c\/li\u003e\n\u003cli\u003ePT-24-95F\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor all other Newmar models, the TCS-12\/24 sensor should be used instead.\u003c\/p\u003e\u003ch4\u003eDurable and Reliable Design\u003c\/h4\u003e\u003cp\u003eEquipped with a 25-foot cable, the TP Temperature Probe offers flexibility in installation, accommodating various marine and industrial setups. Its robust construction ensures reliable operation in demanding environments, making it a dependable choice for marine applications.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDesigned exclusively for select Newmar Phase Three chargers\u003c\/li\u003e\n\u003cli\u003eEnhances charging efficiency by adjusting based on temperature fluctuations\u003c\/li\u003e\n\u003cli\u003eHelps prevent overcharging, extending battery life\u003c\/li\u003e\n\u003cli\u003eIncludes a 25-foot cable for versatile installation options\u003c\/li\u003e\n\u003cli\u003eBuilt for durability in marine environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":52023796564149,"sku":"QBP695345","price":168.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1228162_qbp695345.jpg?v=1763258692"},{"product_id":"qbp801891","title":"Raymarine ST69 Transom-Mount Speed and Temperature Transducer, For ST40, Plastic Housing","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine E26005 is a transom-mount speed and water temperature sensor for ST40 instrument systems. It is the ST69 paddlewheel style sensor, so it reads boat speed and sea temperature at the stern without using a through-hull fitting. The sensor uses a 9 m cable and reads speed from 4 to 50 knots, which covers the normal operating range of many cruising, fishing, and performance boats.\u003c\/p\u003e\u003cp\u003eThis is an analog transducer for instrument displays rather than a standalone network sensor. That matters when you are replacing an older ST40 sensor or matching it to a compatible Raymarine instrument setup, because the mounting style, cable run, and instrument input all need to line up before you mount it on the transom and route the cable forward.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eST69 transom-mount paddlewheel sensor for speed and water temperature\u003c\/li\u003e\n\u003cli\u003eWorks with Raymarine ST40 systems and other compatible Raymarine analog instrument displays\u003c\/li\u003e\n\u003cli\u003e9 m cable helps with runs from the transom to helm-mounted instruments\u003c\/li\u003e\n\u003cli\u003ePaddlewheel and housing sit close to the hull to help keep spray and drag down\u003c\/li\u003e\n\u003cli\u003eBuilt-in transom-angle adjustment helps when matching the sensor to the boat's stern angle\u003c\/li\u003e\n\u003cli\u003ePaddlewheel can be removed for cleaning or replacement\u003c\/li\u003e\n\u003cli\u003ePlastic housing stands up well to impact and chemical exposure around the transom\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eThis sensor is used with Raymarine speed and bidata instrument displays that accept analog speed and temperature input, including ST40, i40 Speed, i40 Bidata, i50 Speed, and i50 Tridata. On i70 and i70s installations it is used through an iTC-5 converter, which is worth checking before ordering a direct replacement.\u003c\/p\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eTransom mounting makes sense on boats where you want speed and temperature data but do not want a fitting through the bottom of the hull. The bracket lets you set the sensor angle to suit the transom, and the cable can exit from the left side, right side, or top of the housing. That gives a little more freedom on sterns that already have ladders, trim tabs, drains, or trailer hardware nearby.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eLike any paddlewheel sensor, it works best when the wheel spins freely and the sensing face stays clear of growth. Periodic cleaning is part of normal upkeep, especially on boats kept in saltwater. This sensor suits owners replacing an ST40 transducer, refitting a smaller instrument system, or adding basic speed and water temperature data at the helm without moving to a larger electronics package.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52023807115445,"sku":"QBP801891","price":124.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330774_qbp801891.jpg?v=1780191992"},{"product_id":"qbp791133","title":"Raymarine EV-1 Autopilot Sensor Core, For Traditional Steering Systems, 9-Axis, IPX6\/IPX7, SeaTalkng","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine E70096 is the EV-1 Sensor Core, a 9-axis heading and attitude sensor for Raymarine Evolution autopilot systems with traditional steering. It connects to the SeaTalkng backbone, runs on 12 V nominal power with a 10.8 to 15.6 V DC operating range, and draws 30 mA with a LEN of 1.\u003c\/p\u003e\u003cp\u003eThis unit tracks heading, pitch, roll, and yaw so the autopilot can react as the boat moves through changing sea states. The housing is sealed to IPX6 and IPX7, and it can be mounted above or below deck. For buyers checking installation space, the sensor body measures 140 mm in diameter, 35 mm deep with the mounting enclosure, and 95 mm deep when used with the wall bracket.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e9-axis sensor package with a 3-axis accelerometer, 3-axis compass, and 3-axis gyro for heading and attitude data\u003c\/li\u003e\n\u003cli\u003eCourse-keeping accuracy to within 2 degrees in all conditions\u003c\/li\u003e\n\u003cli\u003eSeaTalkng connection carries both power and data on the network backbone\u003c\/li\u003e\n\u003cli\u003eBuilt for traditional steering Evolution systems, including mechanical and hydraulic layouts\u003c\/li\u003e\n\u003cli\u003eAbove-deck or below-deck mounting, with flat-surface and wall-bracket installation options\u003c\/li\u003e\n\u003cli\u003eSealed housing rated IPX6 and IPX7, with an operating temperature range from -25 C to +55 C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe EV-1 combines the heading sensor and autopilot processing functions in one housing, which keeps the installation simpler than older setups that relied on a separate fluxgate compass. It can be mounted horizontally on a flat surface or on the supplied bracket for a wall or other vertical surface.\u003c\/p\u003e\u003cp\u003eDuring installation, the arrow on the front of the sensor needs to stay parallel with the vessel centerline and point toward the bow. The included 1 m SeaTalkng spur cable covers the local drop to the backbone, which helps when the sensor is being placed inside a console, under a deckhead, or on a bulkhead near the rest of the pilot network.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is the EV-1 version for Raymarine Evolution systems that use traditional steering. It fits best where the boat already has, or is being outfitted with, a SeaTalkng backbone, an Evolution control head, and the matching actuator control hardware.\u003c\/p\u003e\u003cp\u003eThe sensor can also be used on its own to feed compass heading data to a compatible Raymarine chartplotter or radar. It suits owners replacing an older heading sensor, building an Evolution pilot from components, or adding heading input for functions such as radar overlay and MARPA on a Raymarine display.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMounting trim\u003c\/li\u003e\n\u003cli\u003eEV sensor\u003c\/li\u003e\n\u003cli\u003eLarge sealing ring\u003c\/li\u003e\n\u003cli\u003eMounting tray\u003c\/li\u003e\n\u003cli\u003eSmall sealing ring\u003c\/li\u003e\n\u003cli\u003eWall mounting bracket\u003c\/li\u003e\n\u003cli\u003eScrews for deck or bracket mounting\u003c\/li\u003e\n\u003cli\u003eScrews for wall bracket\u003c\/li\u003e\n\u003cli\u003eDocumentation pack\u003c\/li\u003e\n\u003cli\u003eSeaTalkng spur cable, 1 m (3.3 ft)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52023807148213,"sku":"QBP791133","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330775_qbp791133.webp?v=1780191992"},{"product_id":"qbp951326","title":"Airmar - HT200 NMEA200 Thru Hull Temperature Sensor","description":"\u003ch4\u003eHigh-Precision Marine Temperature Sensing for Superior Performance\u003c\/h4\u003e\u003cp\u003eThe Airmar HT200 NMEA2000 Thru-Hull Temperature Sensor is designed for boaters and anglers who demand precise and rapid temperature readings. Whether you're fishing offshore or navigating coastal waters, identifying temperature variations is crucial for locating fish and optimizing marine activities. With an ultra-fast 0.15-second response time, this sensor ensures real-time monitoring of water temperature changes. The retractable design allows for easy cleaning without removing the boat from the water, ensuring continuous operation and longevity.\u003c\/p\u003e\u003ch4\u003eAdvanced Smart™ Sensor Technology\u003c\/h4\u003e\u003cp\u003eAirmar's innovative Smart™ Sensor technology integrates the temperature sensor and signal processor within a compact, low-profile housing. This design reduces drag and enhances accuracy by processing temperature data directly within the unit before transmitting it via the NMEA 2000® network. With seamless integration into onboard displays, users can overlay temperature data onto nautical charts or sonar screens for a more informed boating experience.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 6 m (20')\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData Rate:\u003c\/strong\u003e 2X per second\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay Connector:\u003c\/strong\u003e N2 Micro\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Size:\u003c\/strong\u003e 51 mm (2\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Low-Profile Thru-Hull\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetractable Housing:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Accuracy:\u003c\/strong\u003e ±0.3°C (±0.17°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsable Shaft Length:\u003c\/strong\u003e 57 mm (2.25\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 9 to 50 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eHousing Extension Outside the Hull:\u003c\/strong\u003e 5 mm (3\/16\")\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUltra-fast response time for immediate temperature changes (0.15 seconds)\u003c\/li\u003e\n\u003cli\u003eRetractable insert for easy cleaning while in water\u003c\/li\u003e\n\u003cli\u003eLow-profile design minimizes drag for improved vessel performance\u003c\/li\u003e\n\u003cli\u003eSeamless integration with NMEA 2000® networks for real-time temperature data\u003c\/li\u003e\n\u003cli\u003eIdeal for offshore fishing, coastal navigation, and environmental monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVariations List\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHT200BV-N2\u003c\/strong\u003e – \u003cstrong\u003eMaterial:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHT200PV-N2\u003c\/strong\u003e – \u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis marine-grade temperature sensor is a must-have for serious anglers and boaters who rely on precise environmental data to enhance their maritime experience.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Bronze","offer_id":52023851810997,"sku":"QBP951326-289","price":600.0,"currency_code":"USD","in_stock":false},{"title":"Plastic","offer_id":52023851843765,"sku":"QBP951326-174","price":650.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1229701_qbp951326.png?v=1763259365"},{"product_id":"qbp246756","title":"SI-TEX - SST110 Surface Temp Without Sensor","description":"\u003ch4\u003ePrecise Marine Temperature Monitoring for Enhanced Navigation\u003c\/h4\u003e\u003cp\u003eThe SI-TEX SST-110 Surface Temperature Monitor is an essential tool for mariners who require accurate and real-time water temperature readings. Designed for use in a variety of marine environments, this device provides crucial temperature data to aid in navigation, fishing, and environmental monitoring. With its clear LCD display, advanced temperature trend indicators, and customizable high\/low alarms, the SST-110 ensures that users are always informed of changing conditions. The unit operates without a sensor, offering flexibility for those who wish to pair it with compatible transducers.\u003c\/p\u003e\u003ch4\u003eReliable Performance with Wide Power Compatibility\u003c\/h4\u003e\u003cp\u003eBuilt to function across a broad range of power inputs, the SST-110 operates on 9.5V to 33V DC, making it compatible with various marine electrical systems. Its nominal current draw of 0.045 amps ensures efficient power consumption, minimizing the impact on onboard power reserves.\u003c\/p\u003e\u003ch4\u003ePrecision Temperature Readings for Marine Use\u003c\/h4\u003e\u003cp\u003eThis device is engineered for accuracy, providing water temperature measurements with a resolution of 0.01° in Fahrenheit or Celsius. The high level of precision, with an accuracy of ±0.1°F, ensures that users receive dependable data for their marine activities. The unit is designed to display water temperatures ranging from 32.00°F to 99.99°F (0.00°C to 37.77°C), covering a broad spectrum of marine environments.\u003c\/p\u003e\u003ch4\u003eRugged and Functional Display for All Conditions\u003c\/h4\u003e\u003cp\u003eEquipped with a 4-digit LCD display and five levels of backlighting, the SST-110 remains visible in varying lighting conditions, from bright daylight to low-light nighttime operations. The display also features temperature trend arrows and an alarm symbol, providing at-a-glance updates on critical temperature changes.\u003c\/p\u003e\u003ch4\u003eVersatile Transducer Compatibility\u003c\/h4\u003e\u003cp\u003eThe SST-110 supports both transom-mounted and bronze thru-hull temperature probes, offering flexibility based on vessel requirements and user preferences. These options ensure optimal temperature readings for different marine applications, whether for surface temperature monitoring or more integrated onboard systems.\u003c\/p\u003e\u003ch4\u003eCompact Design for Easy Installation\u003c\/h4\u003e\u003cp\u003eWith dimensions of 4.3\" x 4.3\" x 3.5\" deep (110 x 110 x 89 mm), the SST-110 is compact enough to fit seamlessly into various marine instrument panels. Its space-efficient design makes it a practical addition to any vessel’s navigation setup.\u003c\/p\u003e\u003ch4\u003eKey Features at a Glance\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAccurate water temperature readings with ±0.1°F precision\u003c\/li\u003e\n\u003cli\u003e0.01° resolution for highly detailed temperature monitoring\u003c\/li\u003e\n\u003cli\u003eWide temperature range: 32.00°F to 99.99°F (0.00°C to 37.77°C)\u003c\/li\u003e\n\u003cli\u003eLarge 4-digit LCD with adjustable backlighting\u003c\/li\u003e\n\u003cli\u003eHigh and low temperature alarms for user-defined alerts\u003c\/li\u003e\n\u003cli\u003eTrend arrows and alarm indicators for real-time updates\u003c\/li\u003e\n\u003cli\u003eCompatible with transom and thru-hull temperature probes\u003c\/li\u003e\n\u003cli\u003eOperates on a versatile 9.5V to 33V DC power supply\u003c\/li\u003e\n\u003cli\u003eNMEA0183 data output for seamless system integration\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe SI-TEX SST-110 Surface Temperature Monitor is a reliable and precise tool designed for professional and recreational mariners who need accurate water temperature readings to enhance their on-water experience. Whether used for fishing, navigation, or environmental tracking, this unit delivers essential data with clarity and ease of use.\u003c\/p\u003e","brand":"SI-TEX","offers":[{"title":"Default Title","offer_id":52023858888885,"sku":"QBP246756","price":439.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1229962_qbp246756.jpg?v=1763259476"},{"product_id":"qbp501590","title":"Sitex - SST110 Surface Temp With Transom Mount Sensor","description":"\u003ch4\u003eAccurate and Reliable Water Temperature Monitoring\u003c\/h4\u003e\u003cp\u003eThe SI-TEX SST-110 is a high-precision surface temperature gauge designed to provide accurate water temperature readings for marine applications. Whether you're a fisherman seeking optimal water conditions or a mariner monitoring environmental changes, this device ensures reliable performance. The SST-110 features a transom mount sensor for easy installation and delivers real-time data with high accuracy. Its clear LCD display, trend indicators, and customizable high and low alarms make it an essential tool for any vessel.\u003c\/p\u003e\u003ch4\u003eAdvanced Technical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e Operates on 9.50VDC to 33.00VDC, with a nominal current draw of 0.045 amps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e Designed to function in environments ranging from 32°F to 122°F (0°C to 50°C).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e Displays temperature readings with a precision of 0.01°F or 0.01°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy:\u003c\/strong\u003e Maintains an impressive accuracy of ±0.1°F.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompact and Functional Design\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.3\" x 4.3\" x 3.5\" (110 x 110 x 89 mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e A four-digit LCD with five levels of backlighting ensures readability in various lighting conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e Capable of measuring from 32.00°F to 99.99°F (0.00°C to 37.77°C).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eHigh-Quality Sensor Options\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eTransducers Available:\u003c\/strong\u003e Choose between a transom mount or a bronze thru-hull temperature probe for optimal placement and accuracy.\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eIntegrated NMEA0183 Connectivity\u003c\/h4\u003e\u003cp\u003eThe SST-110 supports NMEA0183 output sentences for seamless integration with marine navigation and monitoring systems:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDegrees Celsius Output:\u003c\/strong\u003e $VWMTW,xx.xx,C*CS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDegrees Fahrenheit Output:\u003c\/strong\u003e $IIXDR,G,xx.xx*CS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eKey Features and Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHigh-accuracy temperature readings for reliable marine monitoring.\u003c\/li\u003e\n\u003cli\u003eUser-adjustable high and low alarms for customized alerts.\u003c\/li\u003e\n\u003cli\u003eTemperature trend indicators provide real-time environmental changes.\u003c\/li\u003e\n\u003cli\u003eEasy-to-read backlit LCD display with adjustable brightness.\u003c\/li\u003e\n\u003cli\u003eVersatile power compatibility for a wide range of vessel setups.\u003c\/li\u003e\n\u003cli\u003eSeamless integration with marine electronics via NMEA0183 output.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe SI-TEX SST-110 is a must-have tool for marine enthusiasts, offering precision and ease of use in a robust and reliable package.\u003c\/p\u003e","brand":"SI-TEX","offers":[{"title":"Default Title","offer_id":52023858921653,"sku":"QBP501590","price":474.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1229963_qbp501590.jpg?v=1763259477"},{"product_id":"qbp874724","title":"SI-TEX - SST110 Surface Temp With Thru Hull Sensor","description":"\u003ch4\u003eAccurate and Reliable Water Temperature Monitoring\u003c\/h4\u003e\u003cp\u003eThe SI-TEX SST-110 is a high-precision surface temperature gauge designed to provide accurate water temperature readings for marine applications. Whether you're a fisherman seeking optimal water conditions or a mariner monitoring environmental changes, this device ensures reliable performance. The SST-110 features a transom mount sensor for easy installation and delivers real-time data with high accuracy. Its clear LCD display, trend indicators, and customizable high and low alarms make it an essential tool for any vessel.\u003c\/p\u003e\u003ch4\u003eAdvanced Technical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e Operates on 9.50VDC to 33.00VDC, with a nominal current draw of 0.045 amps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e Designed to function in environments ranging from 32°F to 122°F (0°C to 50°C).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e Displays temperature readings with a precision of 0.01°F or 0.01°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy:\u003c\/strong\u003e Maintains an impressive accuracy of ±0.1°F.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompact and Functional Design\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.3\" x 4.3\" x 3.5\" (110 x 110 x 89 mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e A four-digit LCD with five levels of backlighting ensures readability in various lighting conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e Capable of measuring from 32.00°F to 99.99°F (0.00°C to 37.77°C).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eHigh-Quality Sensor Options\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eTransducers Available:\u003c\/strong\u003e Choose between a transom mount or a bronze thru-hull temperature probe for optimal placement and accuracy.\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eIntegrated NMEA0183 Connectivity\u003c\/h4\u003e\u003cp\u003eThe SST-110 supports NMEA0183 output sentences for seamless integration with marine navigation and monitoring systems:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDegrees Celsius Output:\u003c\/strong\u003e $VWMTW,xx.xx,C*CS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDegrees Fahrenheit Output:\u003c\/strong\u003e $IIXDR,G,xx.xx*CS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eKey Features and Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHigh-accuracy temperature readings for reliable marine monitoring.\u003c\/li\u003e\n\u003cli\u003eUser-adjustable high and low alarms for customized alerts.\u003c\/li\u003e\n\u003cli\u003eTemperature trend indicators provide real-time environmental changes.\u003c\/li\u003e\n\u003cli\u003eEasy-to-read backlit LCD display with adjustable brightness.\u003c\/li\u003e\n\u003cli\u003eVersatile power compatibility for a wide range of vessel setups.\u003c\/li\u003e\n\u003cli\u003eSeamless integration with marine electronics via NMEA0183 output.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe SI-TEX SST-110 is a must-have tool for marine enthusiasts, offering precision and ease of use in a robust and reliable package.\u003c\/p\u003e","brand":"SI-TEX","offers":[{"title":"Default Title","offer_id":52023858954421,"sku":"QBP874724","price":519.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1229964_qbp874724.jpg?v=1763259477"},{"product_id":"qbp634060","title":"SI-TEX - TM200-30 Temperature Sensor Transom Mount 30K Ohm","description":"\u003ch4\u003eReliable Transom Mount Temperature Sensor for Marine Applications\u003c\/h4\u003e\u003cp\u003eEnhance your marine electronics setup with the Sitex TM200-30 Temperature Sensor, designed to deliver accurate temperature readings for marine environments. This transom mount sensor is specifically engineered for compatibility with the SST-110, ensuring seamless integration and reliable performance.\u003c\/p\u003e\u003ch4\u003ePrecision Temperature Monitoring\u003c\/h4\u003e\u003cp\u003eBuilt to provide accurate water temperature readings, the Sitex TM200-30 helps improve navigation, fishing efficiency, and overall vessel monitoring. Its durable construction ensures long-term functionality even in demanding marine conditions.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSensor Type: Transom mount temperature sensor\u003c\/li\u003e\n\u003cli\u003eResistance: 30K Ohm\u003c\/li\u003e\n\u003cli\u003eCompatibility: Designed for use with SST-110\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eProvides accurate water temperature readings for marine applications\u003c\/li\u003e\n\u003cli\u003eDesigned for easy transom mounting\u003c\/li\u003e\n\u003cli\u003eDurable and reliable for long-term performance\u003c\/li\u003e\n\u003cli\u003eSeamless compatibility with the SST-110 system\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis temperature sensor is a vital addition for boaters seeking precise water temperature data, ensuring enhanced decision-making while on the water.\u003c\/p\u003e","brand":"SI-TEX","offers":[{"title":"Default Title","offer_id":52023858987189,"sku":"QBP634060","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1229965_qbp634060.jpg?v=1763259478"},{"product_id":"qbp170635","title":"SI-TEX - TM-200-30 Temp Sensor 5 Pin Transom Mount","description":"\u003ch4\u003eReliable Temperature Sensing for Marine Navigation\u003c\/h4\u003e\u003cp\u003eThe Sitex TM-200-30 Temp Sensor is a high-performance transom mount temperature sensor designed for marine applications. Engineered to provide accurate and real-time water temperature readings, this sensor enhances navigation and fishing experiences by delivering critical environmental data. Built with durability in mind, it withstands harsh marine conditions, ensuring consistent and precise performance on the water.\u003c\/p\u003e\u003ch4\u003eDurable and Efficient Design\u003c\/h4\u003e\u003cp\u003eCrafted for reliability, the Sitex TM-200-30 is designed to be securely mounted on the transom of a vessel, offering seamless integration with compatible marine systems. Its rugged construction ensures long-term durability, making it an ideal choice for both recreational and commercial boaters.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal-Time Temperature Monitoring\u003c\/strong\u003e – Provides accurate water temperature readings to enhance navigation and fishing success.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Durability\u003c\/strong\u003e – Built to withstand harsh saltwater and freshwater conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransom Mount Design\u003c\/strong\u003e – Easily attaches to the boat’s transom for secure and stable operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Pin Connector Compatibility\u003c\/strong\u003e – Ensures smooth integration with compatible marine electronics.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis transom-mounted temperature sensor is an essential addition to any vessel, offering precise data to optimize marine activities with confidence.\u003c\/p\u003e","brand":"SI-TEX","offers":[{"title":"Default Title","offer_id":52023859019957,"sku":"QBP170635","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1229966_qbp170635.jpg?v=1763259479"},{"product_id":"qbp130295","title":"SI-TEX - TS200-30 Temperature Sensor Bronze TH 30K Ohm","description":"\u003ch4\u003ePrecision Marine Temperature Sensor for Reliable Monitoring\u003c\/h4\u003e\u003cp\u003eThe Sitex TS200-30 Temperature Sensor is a high-quality marine-grade sensor designed to deliver precise temperature readings in demanding environments. Built with durability in mind, this sensor ensures long-lasting performance, making it an excellent choice for various marine applications. Whether you're monitoring engine temperature, water conditions, or onboard climate control, the TS200-30 provides accurate and dependable data to enhance operational efficiency and safety.\u003c\/p\u003e\u003ch4\u003eRobust Technical Specifications for Marine Applications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor Type:\u003c\/strong\u003e Temperature sensor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e 30K Ohm system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bronze for superior corrosion resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Thru-hull mounting for secure and accurate placement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eDurable and Corrosion-Resistant Build\u003c\/h4\u003e\u003cp\u003eConstructed from high-quality bronze, the Sitex TS200-30 is built to withstand harsh marine conditions, including prolonged exposure to saltwater. This robust design ensures longevity and reliability, reducing maintenance requirements and enhancing overall vessel performance.\u003c\/p\u003e\u003ch4\u003eKey Features and Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePrecision temperature measurement for accurate monitoring\u003c\/li\u003e\n\u003cli\u003eHeavy-duty bronze construction ensures durability in marine environments\u003c\/li\u003e\n\u003cli\u003eDesigned for thru-hull installation, offering secure and stable operation\u003c\/li\u003e\n\u003cli\u003e30K Ohm resistance for compatibility with Sitex and other compatible systems\u003c\/li\u003e\n\u003cli\u003eIdeal for tracking water and engine temperatures, improving vessel safety\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis marine-grade temperature sensor is a must-have for boat owners and marine professionals seeking a reliable and efficient monitoring solution. With its durable construction and precision readings, the Sitex TS200-30 enhances onboard performance and safety, ensuring you stay informed in real time.\u003c\/p\u003e","brand":"SI-TEX","offers":[{"title":"Default Title","offer_id":52023859052725,"sku":"QBP130295","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1229967_qbp130295.jpg?v=1763259479"},{"product_id":"qbp399618","title":"Newmar Power - TCS-12\/24\/40 Temp Probe - With 40ft Cable for PT Charger","description":"\u003ch4\u003ePrecision Temperature Compensation for Marine Battery Charging\u003c\/h4\u003e\u003cp\u003eThe \u003cstrong\u003eNewmar Power TCS-12\/24\/40 Temperature Probe\u003c\/strong\u003e is a vital accessory designed to enhance the performance and longevity of your \u003cstrong\u003ePT Charger\u003c\/strong\u003e in marine environments. This sensor ensures precise temperature compensation, optimizing charging efficiency based on real-time temperature fluctuations. By adjusting voltage according to ambient conditions, it prevents overcharging and undercharging, maximizing battery life. Built for reliability, the probe is ideal for marine and offshore applications where maintaining battery health is critical.\u003c\/p\u003e\u003ch4\u003eKey Technical Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e TCS 12\/24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Compensation Rate:\u003c\/strong\u003e -5 mV per cell per °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e PT Chargers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized for Marine Use:\u003c\/strong\u003e Ensures stable charging in fluctuating environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 40 feet (approx. 12 meters)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEnhances battery charging efficiency with real-time temperature adjustments\u003c\/li\u003e\n\u003cli\u003ePrevents battery damage by optimizing charge voltage based on temperature\u003c\/li\u003e\n\u003cli\u003eLong 40-foot cable allows for flexible installation in various marine setups\u003c\/li\u003e\n\u003cli\u003eDesigned for seamless integration with Newmar PT Chargers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis temperature probe is an essential component for maintaining efficient and safe battery charging in marine applications, ensuring reliable power for extended voyages.\u003c\/p\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":52023859708085,"sku":"QBP399618","price":184.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1229996_qbp399618.jpg?v=1763259495"},{"product_id":"qbp989249","title":"Davis Temperature\/Humidity Sensor w\/Radiation Shield 6830","description":"\u003cp\u003e\u003cb\u003eTemperature\/Humidity Sensor w\/Radiation Shield\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eFeatures both temperature and humidity sensors inside the radiation shield, which protects the sensors from solar radiation and other sources of\u003cbr\u003eradiated and reflected heat. Includes hardware for mounting on a fence post or pole and 25' (7,6M) cable.\u003c\/p\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":52023875076277,"sku":"QBP989249","price":175.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1230443_qbp989249.jpg?v=1763259689"},{"product_id":"qbp218768","title":"Davis Temperature\/Humidity Sensor w\/24-Hour Fan Aspirated Radiation Shield 6832","description":"\u003cb\u003eTemperature\/Humidity Sensor with 24-Hour Fan Aspirated Radiation Shield\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eFeatures both temperature and humidity sensors inside the 24-hour fan-aspirated radiation shield, which protects the sensors from solar radiation and other sources of radiated and reflected heat.\u003cbr\u003eThis model includes a solar panel to power the motor-driven fan. Includes hardware for mounting on a fence post or pole and 25' (7,6M) cable.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTemperature and humidity sensors are inside a protective radiation shield that protects against solar radiation and other sources of radiated and reflected heat\u003c\/li\u003e\n\u003cli\u003eWireless transmitter and battery are inside a weather-resistant shelter\u003c\/li\u003e\n\u003cli\u003eUpdates every 2.5 seconds\u003c\/li\u003e\n\u003cli\u003eFrequency-hopping spread spectrum radio for continuous data transmission\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":52023875109045,"sku":"QBP218768","price":625.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1230444_qbp218768.jpg?v=1763259690"},{"product_id":"qbp968349","title":"Davis Temperature Probe w\/RJ Connector 6477","description":"\u003cstrong\u003eTemperature Probe with RJ Connector\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eUsed to measure air, soil, or water temperature. Features an electronic sensor sheathed in black UV-stabilized plastic. Includes 25' (7.6M) cable.\u003cbr\u003eCompatible with Weather Envoy, Envoy8X, and Anemometor\/Sensor Transmitter Kit.","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":52023914365109,"sku":"QBP968349","price":49.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1233000_qbp968349.jpg?v=1763260532"},{"product_id":"qbp501753","title":"Davis Wireless Leaf \u0026 Soil Moisture\/Temperature Station - No Sensors 6345","description":"\u003cb\u003eWireless Leaf \u0026amp; Soil Moisture\/Temperature Station\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProduct Description\u003c\/b\u003e\u003cbr\u003eSolar-powered station includes transmitter and battery inside weather-resistant shelter.\u003cbr\u003eSensors are sold separately, letting you build the station that matches your needs. To view the data, add a wireless Vantage Pro2 console\/receiver (#6312) or Weather Envoy (#6316), and a wireless Vantage Connect (#6620) or WeatherLink.\u003cbr\u003e\u003cbr\u003eNot compatible with original Vantage Pro stations.\u003cbr\u003e\u003cbr\u003e* Note: Compatible with Vantage Pro2 US version only; not compatible with original Vantage Pro (Vantage Pro'1'), Vantage Pro2 EU, UK or OV versions.","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":52023932715189,"sku":"QBP501753","price":472.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1234105_qbp501753.jpg?v=1763261038"},{"product_id":"qbp598142","title":"Davis Stainless Steel Temperature Probe w\/2-Wire Termination 6470","description":"\u003cstrong\u003eStainless Steel Temperature Probe w\/Two-Wire Termination\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMeasure temperature of air, soil, or water with this multi-purpose temperature probe.\u003cbr\u003e\u003cbr\u003eAdd up to four probes to a single Leaf \u0026amp; Soil Moisture\/Temperature Station. Or add to Vantage Connect and use in place of Vantage Connect's internal temperature sensor. Great option for measuring water or soil temperature without adding another station.\u003cbr\u003e\u003cbr\u003eProbe has a 2-1\/2\" (64mm)-long stainless steel housing and includes 15' (4.6M) direct-burial cable.\u003cbr\u003e\u003cbr\u003eCompatible with both original Vantage Pro and Vantage Pro2.","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":52023940841653,"sku":"QBP598142","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1234608_qbp598142.jpg?v=1763261223"},{"product_id":"qbp625766","title":"Davis Stainless Steel Temperature Probe w\/RJ Connector 6475","description":"\u003cstrong\u003eStainless Steel Temperature Probe w\/RJ Connector\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMeasure temperature of air, soil, or water with this multi-purpose temperature probe.\u003cbr\u003e\u003cbr\u003eAdd up to four probes to a single Leaf \u0026amp; Soil Moisture\/Temperature Station. Or add to Vantage Connect and use in place of Vantage Connect's internal temperature sensor. Great option for measuring water or soil temperature without adding another station.\u003cbr\u003e\u003cbr\u003eProbe has a 2-1\/2\" (64mm)-long stainless steel housing and includes 15' (4.6M) direct-burial cable.\u003cbr\u003e\u003cbr\u003eCompatible with Wireless Temperature Station (6372), Weather Envoy (6316), Envoy8X (6318), and Anemometer\/Sensor Transmitter Kit (6332).\u003cbr\u003e","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":52023940874421,"sku":"QBP625766","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1234609_qbp625766.jpg?v=1763261224"},{"product_id":"qbp533941","title":"Dolphin Charger Temperature Sensor 99047","description":"\u003cp\u003e\u003cstrong\u003eTemperature Sensor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDolphin Charger Temperature Sensor for Pro Chargers and Bat View.\u003c\/p\u003e","brand":"Dolphin Charger","offers":[{"title":"Default Title","offer_id":52023952572597,"sku":"QBP533941","price":62.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1235407_qbp533941.jpg?v=1763261518"},{"product_id":"qbp868319","title":"Davis Complete Wireless Soil Moisture\/Temperature Station - Includes Sensors 6345CS","description":"\u003cb\u003eComplete Wireless Soil Moisture\/Temperature Station\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProduct Description\u003c\/b\u003e\u003cbr\u003eSolar-powered station includes transmitter and battery inside weather-resistant shelter, 4 soil moisture sensors and 4 temperature probes. To view the data, add a wireless Vantage Pro2 console\/receiver, Weather Envoy, or WeatherLink. Add up to 2 leaf wetness sensors (sold separately), to create a custom station.\u003cbr\u003eSee also the Wireless Leaf Moisture\/Temperature Station (#6345) which does not include sensors.\u003cbr\u003eNot compatible with original Vantage Pro stations.\u003cbr\u003eThis station meets the GLOBE protocol requirements.","brand":"Davis Instruments","offers":[{"title":"Default Title","offer_id":52024017322165,"sku":"QBP868319","price":1125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1241100_qbp868319.jpg?v=1763263119"},{"product_id":"qbp827812","title":"GOST Wireless Analog Temperature Sensor GMM-IP67-TEMPSENSOR","description":"\u003cp\u003e\u003cstrong\u003eWireless Analog Temperature Sensor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMonitor the temperature of the engine room. Place the Wireless Module in the area that needs to be monitored, link the module to the GOST Universal Control Unit, and receive alerts if the temperature drops below a preset level.\u003c\/p\u003e","brand":"GOST","offers":[{"title":"Default Title","offer_id":52024044880053,"sku":"QBP827812","price":584.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1242634_qbp827812.jpg?v=1763263685"},{"product_id":"qbp840842","title":"Veratron NMEA 2000 Sailing Kit w\/OceanLink® GPS Speedometer, Wind Sensor, Wind Angle \u0026 Wind Speed Gauge A2C3935310001","description":"\u003cp\u003e\u003cstrong\u003eNMEA 2000 Sailing Kit with OceanLink® GPS Speedometer, Wind Sensor, Wind Angle \u0026amp; Wind Speed Gauge\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eOceanLink® GPS Speedometer\u003c\/li\u003e \u003cli\u003eWind Sensor\u003c\/li\u003e \u003cli\u003eWind Angle\u003c\/li\u003e \u003cli\u003eWind Speed Gauge\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Veratron","offers":[{"title":"Default Title","offer_id":52024064049333,"sku":"QBP840842","price":1489.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1243886_qbp840842.jpg?v=1763264070"},{"product_id":"qbp885272","title":"Airmar DX900+ Multilog Smart™ Electromagnetic Speed Sensor Thru-Hull NMEA0183 DX900-ST-0","description":"\u003cp\u003e\u003cstrong\u003eDX900+ Multilog Smart™ Electromagnetic Speed Sensor Thru–Hull NMEA 0183\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSay goodbye to the paddlewheel and hello to Smart® Sensor technology. The DX900+ uses electromagnetic technology to accurately measure dual-axis speed through water plus immediately calculate leeway travel. Paddlewheels need cleaning and only measure speed longitudinally. The DX900+ measures water flow at 360° and will immediately deliver the leeway data to your instrument. There are no moving parts to clean or maintain. Performance sailors, racers, or long-distance cruisers will immediately see the benefits of the accuracy and reliability of the DX900+.\u003c\/p\u003e \u003cp\u003eThe DX900+ is available as a Speed and Water-temperature sensor.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eElectromagnetic dual-axis speed, and water temperature with no moving parts\u003c\/li\u003e \u003cli\u003eMeasures transverse and longitudinal speed that instantaneously calculates leeway angle and speed through water with no latency\u003c\/li\u003e \u003cli\u003eConnects and shares data wirelessly with AIRMAR’s CAST™ app. Perfect for displaying performance data on phones or tablets, plus makes calibration fast and easy.\u003c\/li\u003e \u003cli\u003eOutputs heel and trim\u003c\/li\u003e \u003cli\u003eThe sensing pins in contact with the water are made from very high-quality alloy, allowing very stable measurements and high resistance to corrosion. (Do not use any bottom paint on exposed sensing pins.)\u003c\/li\u003e \u003cli\u003eThru-hull, low-profile housing with water valve\u003c\/li\u003e \u003cli\u003eRetractable insert for safe storage\u003c\/li\u003e \u003cli\u003eAvailable in a plastic (P717V) or stainless steel (SS617V) housing\u003c\/li\u003e \u003cli\u003eRetrofits to existing P617V housing\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eWeight (sensor, box, and cable): \u003cul\u003e \u003cli\u003ePlastic—1 kg (2.3 lb.)\u003c\/li\u003e \u003cli\u003eStainless steel—2 kg (4.4 lb.)\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eHull Material: Plastic housing for fiberglass or metal hull\/Stainless steel housing compatible with all hull materials\u003c\/li\u003e \u003cli\u003eDeadrise Angle: Up to 22°\u003c\/li\u003e \u003cli\u003eHole Diameter: Fiberglass or wood—51 mm or 2\", Stainless steel housing in metal hull—57 mm or 2-1\/4\"\u003c\/li\u003e \u003cli\u003eTransverse Speed Range: ±6 knots\u003c\/li\u003e \u003cli\u003eLongitudinal Speed Range: ±60 knots\u003c\/li\u003e \u003cli\u003eAccuracy of Transverse and Longitudinal Speed: ±0.1 knots for speeds under 10 knots, ±1% for speeds above 10 knots\u003c\/li\u003e \u003cli\u003eDisplay Resolution: 0.01 knots\u003c\/li\u003e \u003cli\u003eOutputs: NMEA 0183—speed and temperature\u003c\/li\u003e \u003cli\u003eConfigurable Data Update Rate: Up to 10 Hz\u003c\/li\u003e \u003cli\u003eOperating Temperature Range: -15°C to 55°C (5°F to 131°F)\u003c\/li\u003e \u003cli\u003eWater Temperature Accuracy: +0.5°C (+1.0°F)\u003c\/li\u003e \u003cli\u003ePower: Supply Voltage: 9 to 16 VDC\u003c\/li\u003e \u003cli\u003eAverage Power Consumption: NMEA 0183 - 2.5 W\u003c\/li\u003e \u003cli\u003eStandard Cable Length: NMEA 0183 - 6M (20')\u003c\/li\u003e \u003cli\u003eIncludes: Blanking plug\u003c\/li\u003e \u003cli\u003eCE Compliant: Yes to IEC60945\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":52024064770229,"sku":"QBP885272","price":1199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1244001_qbp885272.jpg?v=1763264087"},{"product_id":"qbp486174","title":"Balmar Temperature Sensor Alternator - 80\" Length MC-TS-A80","description":"\u003cp\u003e\u003cstrong\u003eTemperature Sensor Alternator - 80\" Length\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIntended for longer runs when the standard 54\" Alternator Temp Sensor (PN: MC-TS-A) is insufficient.\u003c\/p\u003e \u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"Balmar","offers":[{"title":"Default Title","offer_id":52024079974581,"sku":"QBP486174","price":40.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1245140_qbp486174.jpg?v=1763264549"},{"product_id":"qbp900536","title":"Maretron Ambient Air Temp Probe TP-AAP-1","description":"Ambient Air Temperature Probe (-20°C to 80°C or -4°F to 176°F) \u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":52024098619573,"sku":"QBP900536","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1245996_qbp900536.jpg?v=1763264825"},{"product_id":"qbp549668","title":"Maretron Immersion Tank Temp Probe TP-IP-1","description":"Immersion Probe for Tanks or Plenums (-20°C to 80°C or -4°F to 176°F) \u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":52024134697141,"sku":"QBP549668","price":135.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1248491_qbp549668.jpg?v=1763265655"},{"product_id":"qbp535256","title":"Maretron Temperature Sensor f\/ DCM100 TR3K","description":"The TR3K temperature probe is for use with the Maretron TMP100 Temperature Module (optional extra) or the DCM100 DC Monitor (it is included with the DCM100). This probe ends in a ring terminal and can be used to measure battery temperature or any other under-bolt temperature. The temperature range is -4 deg. F to 176 deg. F (-20 deg C to 80 deg C).\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":52024134762677,"sku":"QBP535256","price":40.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1248493_qbp535256.jpg?v=1763265656"},{"product_id":"qbp947987","title":"Volvo Penta Temperature Sensor - Volvo Penta (3862500)","description":"\u003cp\u003eThe temperature Sensor is suitable for various Volvo Penta engines and is installed on 3.0, 4.3, 5.0, 5.7, and 8.1. The temperature sensor warns of overheating of the exhaust elbow. The Volvo Penta is a unique and innovative way to transmit the temperature of the device smartphone. It is also design with a built-in heat-sensitive sensor, which is adjusted to the exact temperature you need. The temperature sensor can be used as a digital sensor with a digital display to monitor the current temperature of your device.\u003c\/p\u003e \u003cp\u003eKey Features:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesign to use with various Volvo Penta 4 cylinder, V6, and V8 gasoline marine engines.\u003c\/li\u003e \u003cli\u003eMade of high-grade materials for durability and have a long service life.\u003c\/li\u003e \u003cli\u003eWaterproof and windproof can be used on rainy days.\u003c\/li\u003e \u003cli\u003eEasy to install and easy to unscrew and reinstall.\u003c\/li\u003e \u003cli\u003eProduct replaces: Volvo Penta 3861997, VOP3862500\u003c\/li\u003e \u003cli\u003eGenuine and original parts, not aftermarket.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSpecifications:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSKU: 3862500\u003c\/li\u003e \u003cli\u003eBrand: Volvo Penta\u003c\/li\u003e \u003cli\u003eWeight: 0.06 LBS\u003c\/li\u003e \u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003e \u003cp\u003eVolvo Penta Exploded view \/ schematic Electronic Engine Control\u003c\/p\u003e \u003ch4\u003eThis product replaces:\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e3861997, VOP3862500\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volvo Penta","offers":[{"title":"Default Title","offer_id":52024168743093,"sku":"QBP947987","price":37.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1250877_qbp947987.jpg?v=1763266454"},{"product_id":"qbp707627","title":"Veratron Engine Oil Temperature Sensor - M16x1.5 Thread - 150°C Temp Range B002006","description":"\u003cp\u003e\u003cstrong\u003eEngine Oil Temperature Sensor - M16x1.5 Thread - 150°C Temp Range\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFunction - Oil temperature, coolant temperature\u003c\/li\u003e \u003cli\u003eLength - 28.5mm (1-1\/8\")\u003c\/li\u003e \u003cli\u003eThread - M16x1.5\u003c\/li\u003e \u003cli\u003eCalibration - 150°C\u003c\/li\u003e \u003cli\u003eMeasurement Range - 150°C\u003c\/li\u003e \u003cli\u003eOutput Signals - Resistive\u003c\/li\u003e \u003cli\u003eIP67\u003c\/li\u003e \u003cli\u003eInsulated ground pin\u003c\/li\u003e \u003c\/ul\u003e","brand":"Veratron","offers":[{"title":"Default Title","offer_id":52024183029941,"sku":"QBP707627","price":22.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1252086_qbp707627.jpg?v=1763266779"},{"product_id":"qbp958806","title":"Maretron IRHT-01 Indoor Humidity\/Temperature Sensor IRHT-01","description":"\u003cb\u003eIndoor Humidity\/Temperature Sensor\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe IRHT-01 is used in conjunction with Maretron's Current Loop Monitor (CLM100), which allows indoor humidity and temperature to be broadcast over an NMEA 2000® network where it can be monitored from any compatible NMEA 2000® display. When used together with a Maretron displays, alerts can be set so the user can be informed of abnormal or detrimental conditions. And when not onboard the vessel, users can be notified through emails or text messages. Additionally, the relative humidity and temperature can be stored using Maretron's data recorder (VDR100) for later analysis.\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":52024209932469,"sku":"QBP958806","price":295.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1253871_qbp958806.jpg?v=1763267295"},{"product_id":"qbp357005","title":"Veratron Water Temperature Sensor - 1\/2\"-14NPT Thread - 120°C Temp Range B001999","description":"\u003cp\u003e\u003cstrong\u003eWater Temperature Sensor - 1\/2\"-14NPT Thread - 120°C Temp Range \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese resistive temperature sensors are built in a housing of brass.\u003cbr\u003e\u003cbr\u003eAll sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors.\u003cbr\u003e\u003cbr\u003eThe sensors can be applied in a wide field of applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFunction - Oil temperature, coolant temperature\u003c\/li\u003e\n\u003cli\u003eLength - 28.5mm (1-1\/8\")\u003c\/li\u003e\n\u003cli\u003eThread - 1\/2\"-14NPT\u003c\/li\u003e\n\u003cli\u003eCalibration - 120°C\u003c\/li\u003e\n\u003cli\u003eMeasurement Range - 120°C\u003c\/li\u003e\n\u003cli\u003eOutput Signals - Resistive\u003c\/li\u003e\n\u003cli\u003eIP67\u003c\/li\u003e\n\u003cli\u003eInsulated ground pin\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veratron","offers":[{"title":"Default Title","offer_id":52024219271349,"sku":"QBP357005","price":22.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1254641_qbp357005.jpg?v=1763267480"},{"product_id":"qbp922106","title":"Veratron Water Temperature Sensor - 1\/4\"-18NPT Thread - 120°C Temp Range B002000","description":"\u003cp\u003e\u003cstrong\u003eWater Temperature Sensor - 1\/4\"-18NPT Thread - 120°C Temp Range \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFunction - Oil temperature, coolant temperature\u003c\/li\u003e \u003cli\u003eLength - 28.5mm (1-1\/8\")\u003c\/li\u003e \u003cli\u003eThread - 1\/4\"-18NPT\u003c\/li\u003e \u003cli\u003eCalibration - 120°C\u003c\/li\u003e \u003cli\u003eMeasurement Range - 120°C\u003c\/li\u003e \u003cli\u003eOutput Signals - Resistive\u003c\/li\u003e \u003cli\u003eIP67\u003c\/li\u003e \u003cli\u003eInsulated ground pin\u003c\/li\u003e \u003c\/ul\u003e","brand":"Veratron","offers":[{"title":"Default Title","offer_id":52024219304117,"sku":"QBP922106","price":22.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1254642_qbp922106.jpg?v=1763267481"},{"product_id":"qbp760551","title":"Veratron Water Temperature Sensor - M14x1.5 Thread - 120°C Temp Range B002001","description":"\u003cp\u003e\u003cstrong\u003eWater Temperature Sensor - M14x1.5 Thread - 120°C Temp Range\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFunction - Oil temperature, coolant temperature\u003c\/li\u003e \u003cli\u003eLength - 28.5mm (1-1\/8\")\u003c\/li\u003e \u003cli\u003eThread - M14x1.5\u003c\/li\u003e \u003cli\u003eCalibration - 120°C\u003c\/li\u003e \u003cli\u003eMeasurement Range - 120°C\u003c\/li\u003e \u003cli\u003eOutput Signals - Resistive\u003c\/li\u003e \u003cli\u003eIP67\u003c\/li\u003e \u003cli\u003eInsulated ground pin\u003c\/li\u003e \u003c\/ul\u003e","brand":"Veratron","offers":[{"title":"Default Title","offer_id":52024219336885,"sku":"QBP760551","price":22.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1254643_qbp760551.jpg?v=1763267482"},{"product_id":"qbp247053","title":"Veratron Water Temperature Sensor - M16x1.5 Thread - 120°C Temp Range B002002","description":"\u003cp\u003e\u003cstrong\u003eWater Temperature Sensor - M16x1.5 Thread - 120°C Temp Range\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFunction - Oil temperature, coolant temperature\u003c\/li\u003e \u003cli\u003eLength - 28.5mm (1-1\/8\")\u003c\/li\u003e \u003cli\u003eThread - M16x1.5\u003c\/li\u003e \u003cli\u003eCalibration - 120°C\u003c\/li\u003e \u003cli\u003eMeasurement Range - 120°C\u003c\/li\u003e \u003cli\u003eOutput Signals - Resistive\u003c\/li\u003e \u003cli\u003eIP67\u003c\/li\u003e \u003cli\u003eInsulated ground pin\u003c\/li\u003e \u003c\/ul\u003e","brand":"Veratron","offers":[{"title":"Default Title","offer_id":52024219369653,"sku":"QBP247053","price":22.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1254644_qbp247053.jpg?v=1763267482"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/speed-temperature-sensors.oembed?page=2","provider":"Quality Boat Parts","version":"1.0","type":"link"}