{"title":"Spare Parts","description":"","products":[{"product_id":"qbp869808","title":"Vimar E27 Lampholder, M10x1, Earth Terminal, Threaded Skirt, Brass Finish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM02144 is an E27 lampholder with a threaded skirt and a brass finish for portable-style installations and classic marine light fittings. It’s the component that holds an E27 lamp base and brings your wiring safely into the fixture.\u003c\/p\u003e\u003cp\u003eMounting is done via an M10 x 1 nipple with a locking screw, which is useful when the holder passes through a canopy, bracket, or threaded tube and you want it to stay put under vibration. The cap includes an earth terminal for grounding when the fixture is wired with a protective earth conductor.\u003c\/p\u003e\u003cp\u003eThe dome and threaded jacket are zinc-plated steel with a polished surface and brass-color appearance, which suits enclosed or sheltered locations on board where you want a traditional look without switching away from E27 lamps.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eE27 Edison-screw lampholder for standard E27-base lamps\u003c\/li\u003e\n\u003cli\u003eM10 x 1 nipple mount with locking screw to help resist loosening from vibration\u003c\/li\u003e\n\u003cli\u003eThreaded skirt for fixtures that rely on a threaded jacket to secure the holder body\u003c\/li\u003e\n\u003cli\u003eEarth terminal on the cap for grounding continuity through the fitting\u003c\/li\u003e\n\u003cli\u003eZinc-plated steel dome and threaded jacket with a polished surface and brass finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFits lamps with an E27 base. The M10 x 1 nipple is the key measurement to check against your existing canopy, bracket, or threaded tube hardware. If your current fitting uses a threaded jacket or skirt to clamp a shade, collar, or retaining parts, this style matches that mounting approach.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm there is enough internal space for the lamp you plan to use and that the rest of the fixture provides proper strain relief for the cable. Also verify your lamp and fixture ratings match the supply you’re using on board.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the holder through the fixture opening using the M10 x 1 nipple and lock it in place so the body cannot rotate when changing bulbs. Terminate the protective earth conductor to the earth terminal on the cap when your wiring system includes it, then connect the remaining conductors per the fixture’s wiring layout.\u003c\/p\u003e\u003cp\u003eOn boats, it helps to re-check fasteners after the first few runs and periodically afterward, since vibration can slowly work threaded parts loose if the fixture is not clamped firmly.\u003c\/p\u003e\u003ch6\u003eMaterials and corrosion resistance\u003c\/h6\u003e\u003cp\u003eThe visible metal parts are zinc-plated steel with a brass-color finish. In a salt environment, this type of finish lasts best inside a housing or under a shade where it is not taking direct spray. If the fitting is in a damp area, keep the assembly dry when possible and inspect the earth terminal and connections for early signs of corrosion.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis lampholder is a practical replacement when an older E27 socket in a cabin pendant, saloon light, or classic-style fixture has become loose or the terminals are tired, but you want to keep the existing canopy and hardware. It also suits new builds that want an E27 socket with an M10 x 1 mount and a defined earth termination point as part of the fixture wiring.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDuring seasonal checks, confirm the holder is still tight at the mount, the earth terminal is secure, and the wiring insulation shows no heat damage or chafe. If the fixture is opened for service, clean contacts and re-terminate any conductors that show darkening or looseness.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269496565941,"sku":"QBP869808","price":12.34,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300262_qbp869808.jpg?v=1771544281"},{"product_id":"qbp869932","title":"Vimar E14 Lampholder, M10x1 Nipple, Locking Screw, Brass Finish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM02147 is an E14 Edison lampholder for portable installations and compact light fixtures where you need a threaded entry and a clean, finished look. It uses an M10 x 1 threaded fitting with a locking screw and measures about 2.8 x 5.7 x 2.8 cm, which helps when you are working inside tight housings on board.\u003c\/p\u003e\u003cp\u003eThe metal body uses a brass-colour finish with a zinc-plated polished steel dome and a threaded skirt, so it suits visible cabin areas like reading lights and small pendants while still holding up to everyday vibration and handling.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eE14 lampholder (small Edison screw) for E14-base bulbs commonly used in compact marine fixtures\u003c\/li\u003e\n\u003cli\u003eM10 x 1 threaded fitting with locking screw to keep the assembly from loosening under vibration\u003c\/li\u003e\n\u003cli\u003eZinc-plated polished steel dome with threaded skirt for a neat mechanical finish during assembly\u003c\/li\u003e\n\u003cli\u003eSteel construction with a brass-colour finish for a classic look in cabins and covered interior spaces\u003c\/li\u003e\n\u003cli\u003eCompact size (about 2.8 x 5.7 x 2.8 cm) for tight lamp bodies and small shades\u003c\/li\u003e\n\u003cli\u003eMarked for CE and ENEC 11\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis lampholder is for E14 bulbs only. E14 bulbs are found in many European-style fixtures, including both shore-power AC lights and low-voltage onboard lights that use E14-base bulbs, so confirm the bulb type and voltage match your specific fixture and power system before installing.\u003c\/p\u003e\u003cp\u003eThe M10 x 1 threaded fitting is meant for mounting through a lamp body or bracket that accepts that thread size. If you are replacing an existing holder, check the thread standard on the old part and the available clearance for the dome and skirt.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall with power fully isolated and wire it using marine-appropriate practices for your system. On a boat, a solid mechanical mount and proper cable support matter as much as the electrical connection, so provide strain relief and keep the wiring protected from chafe and heat inside the fixture.\u003c\/p\u003e\u003cp\u003eAfter assembly, use the locking screw to help the threaded connection stay tight over time, especially on planing hulls or anywhere the light sees frequent vibration.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of lampholder is a good match for replacing worn holders in cabin reading lights, chart table lamps, berth lights, and small pendants where an E14 bulb is used and the fixture mounts through a threaded entry.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically check for loosening and for any surface corrosion if the fixture lives in a damp area. If the installation is near salt spray, keeping the holder inside a protected light body and maintaining good seals around the fixture will help extend service life.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269497221301,"sku":"QBP869932","price":11.06,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300263_qbp869932.jpg?v=1771544283"},{"product_id":"qbp870011","title":"Vimar E40 Porcelain Lampholder, Straight Fixing Bracket, White","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM02187 is an E40 Edison lampholder made from white porcelain with a straight fixing bracket for screw mounting. It is built for E40-base lamps where the holder needs to stay stable around heat, vibration, and frequent on-off cycles.\u003c\/p\u003e\u003cp\u003eThe bracket uses elongated fixing slots sized 5.2 x 7.5 mm with 52 mm fixing centres, which helps when you are matching an existing hole pattern on a light body, bulkhead plate, or a retrofit bracket. This is a common spare part for servicing older E40 fixtures on board, where replacing only the lampholder is faster than changing the whole light.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eE40 Edison lampholder for large screw-base lamps\u003c\/li\u003e\n\u003cli\u003ePorcelain body in white\u003c\/li\u003e\n\u003cli\u003eStraight fixing bracket with screw mounting\u003c\/li\u003e\n\u003cli\u003eFixing slots: 5.2 x 7.5 mm\u003c\/li\u003e\n\u003cli\u003eFixing centres: 52 mm\u003c\/li\u003e\n\u003cli\u003eNo starter insertion\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, confirm the lamp base is E40 and compare the mounting pattern on your fixture to the 52 mm centres and the slot size. On refits, the elongated slots can help line up slightly imperfect hole spacing, but the bracket still needs a flat surface so the holder does not twist when you install or remove the lamp.\u003c\/p\u003e\u003cp\u003eBecause E40 lamps are physically large, check clearance around the holder for the lamp envelope, wiring bend radius, and any shade or lens hardware.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis is the lampholder only, not a complete light. It belongs in a properly protected lighting circuit with components that match the lamp type used in your fixture. If the lamp is part of a ballast-based setup, verify the wiring layout inside the fitting before swapping parts and keep terminations tight so they stay put under vibration.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eA good match when you already have an E40 fixture and need a like-for-like replacement that handles high lamp temperatures without relying on plastic around the base. Typical installs are utility lighting, service-area fittings, and refits where the original holder has heat damage or cracked insulation.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDuring routine checks, look for hairline cracks in the porcelain and signs of overheating at the terminals. If the fixture is in a damp location, keep the interior dry and re-seal the light body as needed so salt and moisture do not track along the wiring.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269497450677,"sku":"QBP870011","price":31.11,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300264_qbp870011.jpg?v=1771544284"},{"product_id":"qbp870062","title":"Vimar E14 Lampholder, Porcelain, White Finish, Mounting Base, 3.7 mm Holes, 33 mm Centers","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM02195 is an E14 porcelain lampholder in white, meant for repairing or building small screw-base light fittings on board. It mounts via a base with Ø 3.7 mm fixing holes on 33 mm centres, sized for M3 screws.\u003c\/p\u003e\u003cp\u003ePorcelain is a practical choice where heat buildup is a concern, such as enclosed cabin lights or compact fixtures that run for long periods. Because this is a lampholder only, the electrical rating comes from the lamp and the fixture it is installed in, so match the bulb type and wiring to the circuit already on the boat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eE14 Edison screw lampholder for small screw-base lamps used in many European-style marine fixtures\u003c\/li\u003e\n\u003cli\u003ePorcelain body that handles heat from the lamp and stays stable over time\u003c\/li\u003e\n\u003cli\u003eMounting base with Ø 3.7 mm fixing holes on 33 mm centres, suited to M3 mounting hardware\u003c\/li\u003e\n\u003cli\u003eWhite finish that blends in with common interior luminaires and service parts\u003c\/li\u003e\n\u003cli\u003eNo starter insertion\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFit the base to a flat, solid surface in the luminaire body using two M3 screws, then complete the wiring inside the fixture using the terminals provided on the lampholder. On a boat, take the extra minute to add strain relief on the supply leads and keep all connections inside a protected enclosure so vibration and moisture do not work the wiring loose.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis lampholder is for E14 lamps only. If your fixture takes a different screw base, it will not thread on correctly, so confirm the bulb base before ordering. The mounting hole spacing is the quickest fit check when replacing an existing holder, especially in tight housings where you cannot easily re-drill.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a straightforward replacement part for cabin and berth lights, chart table lamps, lockers, and other small interior fixtures that use an E14 bulb. It is also a sensible choice for maintenance teams keeping spares for older European-style luminaires where the socket is the first part to show heat wear.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003e1 x E14 porcelain lampholder (white)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269497680053,"sku":"QBP870062","price":7.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300265_qbp870062.jpg?v=1771544285"},{"product_id":"qbp870232","title":"Vimar Halogen Lampholder, G4\/G5.3\/GX5.3\/G6.35\/GY6.35, 24V 4.5A, 140 mm PTFE Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM02370 is a 24 V halogen lampholder with flying leads for capsule lamps with G4, G5.3, GX5.3, G6.35, and GY6.35 bases. It is rated up to 4.5 A and comes with a 140 mm PTFE (Teflon) cable using 0.75 mm² conductors. Continuous temperature rating is 300 °C for the lampholder and 180 °C for the cable insulation.\u003c\/p\u003e\u003cp\u003eThis is the sort of spare part you fit when a socket inside a low-voltage halogen downlight or task light has been heat-stressed over time. The body is 17 mm in diameter and mounts with two 3.3 mm fixing holes on an 11.5 mm center-to-center pattern, which helps when you are matching an existing lamp carrier in a compact fixture.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e24 V rating with a maximum current of 4.5 A for low-voltage halogen lighting circuits\u003c\/li\u003e\n\u003cli\u003eFits common capsule lamp bases: G4, G5.3, GX5.3, G6.35, and GY6.35\u003c\/li\u003e\n\u003cli\u003e140 mm PTFE (Teflon) leads with 0.75 mm² conductors for straightforward splicing inside fixtures\u003c\/li\u003e\n\u003cli\u003eContinuous temperature ratings: lampholder 300 °C; cable insulation 180 °C\u003c\/li\u003e\n\u003cli\u003e17 mm body diameter for compact housings\u003c\/li\u003e\n\u003cli\u003eMounting pattern: 3.3 mm fixing holes with 11.5 mm center-to-center spacing\u003c\/li\u003e\n\u003cli\u003eWhite body\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eConfirm your fixture uses one of the supported lamp bases and has room for a 17 mm diameter holder plus the two mounting screws on an 11.5 mm center-to-center pattern. This is a 24 V lampholder for low-voltage lighting circuits and should not be used on 120\/230 V mains wiring.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eMake connections where the wiring stays cooler, not right next to the capsule, and use terminals and sleeving that can handle the heat that halogen lamps generate. Size circuit protection for the lamp load; at 24 V and 4.5 A, the circuit limit is 108 W.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a practical spare for keeping 24 V halogen downlights, reading lights, and utility lights running on older cruisers and workboats. It also suits refits where the original socket has become brittle or the contacts no longer grip the lamp pins firmly.\u003c\/p\u003e\u003ch6\u003eMaintenance and checks\u003c\/h6\u003e\u003cp\u003eDuring routine checks, look for discoloration on the holder, looseness at the lamp pins, or insulation that has hardened near the hot zone. Replacing a tired lampholder helps avoid intermittent lighting and excess heat at the contact points.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269498204341,"sku":"QBP870232","price":6.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300266_qbp870232.webp?v=1771544288"},{"product_id":"qbp870402","title":"Vimar G5 Fluorescent Tube Lampholder, 250V 2A, 110C Rated, Snap Fixing, Screwless Terminals","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM02405 is a snap-in lampholder for G5 fluorescent tubular lamps. It is rated 2 A and is suitable for continuous operating temperatures up to 110°C, which matters when the fixture sits in a warm headliner void or near other heat sources on board.\u003c\/p\u003e\u003cp\u003eThis is a service part used inside a light fitting, where it grips the two G5 pins and keeps the lamp seated even with vibration underway. Screwless terminals make it quick to re-terminate wiring without fighting tiny terminal screws.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFor G5 fluorescent tubular lamps\u003c\/li\u003e\n\u003cli\u003eSnap-fixing body for quick mounting in compatible fixtures\u003c\/li\u003e\n\u003cli\u003eScrewless terminals for rigid and flexible conductors from 0.5 mm² to 1 mm²\u003c\/li\u003e\n\u003cli\u003eRated current: 2 A\u003c\/li\u003e\n\u003cli\u003eRated operating temperature: up to 110°C (continuous)\u003c\/li\u003e\n\u003cli\u003eBrass contacts for stable electrical contact at the lamp pins\u003c\/li\u003e\n\u003cli\u003eWhite finish that blends into most interior light housings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit is mainly about two things: the lamp base and the way the holder mounts into the fixture. This lampholder is for G5 tube pins and uses a snap-fixing style, so it needs a fixture designed for that mounting method.\u003c\/p\u003e\u003cp\u003eMany fluorescent fixtures use a lampholder at each end of the tube. If you are replacing a worn or heat-affected holder, it is worth checking the one on the opposite end for looseness or discoloration as well so the tube stays aligned.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eIsolate power to the light circuit and confirm it is dead before working in the fixture. Strip the conductor to a clean length and insert it fully into the screwless terminal, then do a gentle pull check to confirm it is locked.\u003c\/p\u003e\u003cp\u003eRoute wiring so it is supported and not tugging on the terminals when the boat pounds. Keep the lampholder inside the fixture where it is protected from direct spray and washdowns, and make sure the tube pins seat squarely into the contacts before closing the housing.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis lampholder is a practical fix when an older fluorescent strip light in the cabin, galley, nav station, or a locker starts flickering due to a loose lamp connection. It is also useful during refits where you are keeping an existing fluorescent fixture body but renewing the internal wear parts.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDuring routine checks, look for signs of heat stress such as browning, brittleness, or a lamp that no longer fits snugly. If the tube feels loose in the ends or you see intermittent lighting when the boat vibrates, replacing the holder is often a straightforward way to restore a solid connection.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269498925237,"sku":"QBP870402","price":1.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300271_qbp870402.jpg?v=1771544290"},{"product_id":"qbp870439","title":"Vimar G13 Fluorescent Lamp Holder, 2A 250V, Rotor-Type, Screw Fixing, Brass Contacts, 80C Rated, White Housing","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM02463 is a rigid, screw-fixed lampholder for G13 fluorescent tubular lamps, rated 2A at 250V. It uses a rotor-type contact arrangement with brass contacts, and it is rated for continuous operation up to 80 C.\u003c\/p\u003e\u003cp\u003eThis part is typically used as a replacement when a fluorescent tube socket has loosened up, shows heat wear, or starts causing intermittent lamp contact from vibration. It mounts with screws and connects via terminals, making it a straightforward swap in many existing fluorescent fixtures found on boats.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eG13 lampholder for fluorescent tubular lamps\u003c\/li\u003e\n\u003cli\u003eElectrical rating: 2A, 250V\u003c\/li\u003e\n\u003cli\u003eRotor-type contact style for secure lamp engagement\u003c\/li\u003e\n\u003cli\u003eBrass contacts for stable electrical contact\u003c\/li\u003e\n\u003cli\u003eScrew fixing with terminals for a solid, serviceable installation\u003c\/li\u003e\n\u003cli\u003eRated operating temperature: up to 80 C\u003c\/li\u003e\n\u003cli\u003eWhite finish that suits many fixture interiors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis lampholder is meant for lamps with a G13 base, which is common on many linear fluorescent tubes. Before ordering, confirm the lamp type used in your fixture and that the fixture body has the right mounting position for a screw-fixed, rigid lampholder with terminal connections.\u003c\/p\u003e\u003cp\u003eOn board, it is most often used in older cabin, utility, and machinery-space fluorescent fixtures that are fed from shore power circuits or an inverter. Match the circuit voltage and your existing ballast or control gear to the fixture requirements.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eIsolate power at the breaker before servicing any lighting circuit. Mount the lampholder securely, terminate the conductors at the terminals, and keep wiring supported so the connection does not carry cable strain in areas that see vibration.\u003c\/p\u003e\u003cp\u003eBecause fluorescent fixtures on boats can live in humid spaces, make sure the fixture is properly closed up after installation and that connections stay protected from condensation and spray.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDuring routine lighting checks, look for loosened mounting screws, signs of heat discoloration, or lamp ends that show poor contact. Keeping the tube ends clean and the fixture dry helps maintain consistent starting and reduces flicker caused by contact issues.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269499613365,"sku":"QBP870439","price":4.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300274_qbp870439.jpg?v=1771544293"},{"product_id":"qbp870474","title":"Vimar G13 Fluorescent Lampholder, 2A, 500V, 140C, with Starter Holder, Snap-Fit, Screwless Terminals","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM02473 is a snap-in G13 fluorescent tube lampholder rated 2 A at 500 V for replacing worn or heat-stressed holders in existing light fittings. It is a rigid, rotor-type lampholder with a stop and starter holder, which matches many traditional fluorescent fixtures that use a separate starter.\u003c\/p\u003e\u003cp\u003eConnections are made with screwless terminals and it accepts both rigid and flexible conductors from 0.5 mm² to 1 mm². With a rated operating temperature up to 140 °C and brass contacts at the lamp interface, it is a practical spare to keep onboard for cabins, workshops, and other interior lighting where fluorescent tubes are still in service.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFor G13 fluorescent tubular lamps (bi-pin base)\u003c\/li\u003e\n\u003cli\u003eElectrical rating: 2 A, 500 V\u003c\/li\u003e\n\u003cli\u003eRated operating temperature up to 140 °C\u003c\/li\u003e\n\u003cli\u003eRigid (inflexible) rotor-type lampholder with stop and starter holder\u003c\/li\u003e\n\u003cli\u003eSnap fixing for quick replacement inside compatible fixtures\u003c\/li\u003e\n\u003cli\u003eScrewless terminals for rigid and flexible conductors, 0.5 mm² to 1 mm²\u003c\/li\u003e\n\u003cli\u003eBrass contacts at the lamp pins, white finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis lampholder is intended for fixtures that take G13 fluorescent tubes, commonly found on T8 and T12 lamps. Fit is dictated by the fixture style: it uses a rigid column body and snap fixing, and it includes a starter holder, so it best matches fittings built around a separate starter rather than starterless designs.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm the tube base is G13 and check that your existing holder mounts by snap-in retention. Also confirm your wiring can be terminated within the 0.5 mm² to 1 mm² conductor range.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eIsolate power at the breaker before opening the light fitting. Once the old holder is removed, the VM02473 snaps into the fixture and the conductors are inserted into the screwless terminals. For stranded boat cable, using properly sized ferrules helps keep the termination tidy and secure.\u003c\/p\u003e\u003cp\u003eAfter reassembly, keep wiring routed so it cannot chafe on the fixture body and make sure the light housing is suitable for its mounting location. In lockers or other damp areas, the sealing and drainage of the overall fitting matters more than the lampholder itself.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis part is a good match for boat owners maintaining legacy fluorescent fixtures in cabins, nav stations, and utility areas where a quick, clean lampholder swap is the difference between replacing a whole light and getting the existing fitting back in service.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269500465333,"sku":"QBP870474","price":2.62,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300278_qbp870474.jpg?v=1771544296"},{"product_id":"qbp865562","title":"Vimar Spare Releasing Device, For 16213 \u0026 17043 Locking Socket Outlets, Red Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM01079 is a spare releasing device for socket outlets with a locking device, specifically models 16213 and 17043. It is a non-powered accessory (0 V nominal voltage, 0 poles) with IP00 protection, made from thermoplastic in red.\u003c\/p\u003e\u003cp\u003eOn boats, locking outlets are often used where vibration and movement can work a plug loose over time. This part is meant for restoring the release function on those specific outlets so the plug can be disengaged cleanly without prying on the outlet or trim.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCompatible with socket outlets with locking device 16213 and 17043.\u003c\/li\u003e\n\u003cli\u003eNon-electrical spare part (0 V, 0 poles) that does not change the outlet’s electrical rating.\u003c\/li\u003e\n\u003cli\u003eStraight insert direction for straightforward engagement with the locking mechanism.\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction with a red finish for easy spotting in an onboard spares kit.\u003c\/li\u003e\n\u003cli\u003eIP00 accessory intended for controlled use as a release piece, not as a sealed component.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis releasing device is specific to the locking mechanism used on the listed outlet models. It is not a universal tool for other outlets, and it will not be a match for standard sockets without the dedicated lock.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eUse the releasing device at the face of the outlet when you need to disengage the lock and remove the plug. Insert it straight as intended by the outlet’s release point, apply gentle pressure to release the latch, then withdraw the plug normally. Avoid forcing the outlet if the plug is under tension or the cable is being pulled sideways.\u003c\/p\u003e\u003ch6\u003eWhere it fits in a marine setup\u003c\/h6\u003e\u003cp\u003eIt is a sensible spare to keep onboard if you run locked outlets for equipment that gets plugged and unplugged often, such as galley appliances, a nav station, a workbench area, or dockside gear that sees frequent movement.\u003c\/p\u003e\u003ch6\u003eMaintenance and storage\u003c\/h6\u003e\u003cp\u003eIf it is used on deck or in damp areas, rinse off salt residue and store it dry to keep it easy to handle. Replace the releasing device if it becomes cracked or if releasing the outlet starts to require excessive force, since that can put unnecessary stress on the outlet mechanism.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269502726325,"sku":"QBP865562","price":2.26,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300200_qbp865562.jpg?v=1771544316"},{"product_id":"qbp868609","title":"Vimar LPG Detector Replacement Sensor, For Gas Stop GPL 01895, 90 x 146 mm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM01895.G is a replacement sensor for the Gas Stop GPL LPG detector 01895, used to alert you to LPG leaks on board before they build up in an enclosed space.\u003c\/p\u003e\u003cp\u003eIt is intended for LPG-type flammable gases including butane (C4H10), and it is not a sensor for methane (CH4) or toxic gases. The sensor body measures 90 mm wide with a 146 mm height\/depth, which helps when you are matching the footprint of the original installation.\u003c\/p\u003e\u003cp\u003eThis is a spare part for restoring an existing detection system, not a stand-alone alarm. It is commonly used anywhere propane or butane is carried on a boat, such as near a cylinder locker, regulator area, or the lower section of a galley space.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement sensor for the Gas Stop GPL LPG detector 01895\u003c\/li\u003e\n\u003cli\u003eDetection focus includes LPG-related flammable gases such as butane (C4H10)\u003c\/li\u003e\n\u003cli\u003eNot suitable for methane (CH4), domestic gas, or toxic gas detection\u003c\/li\u003e\n\u003cli\u003ePhysical size: 90 mm width and 146 mm height\/depth\u003c\/li\u003e\n\u003cli\u003eIntended for use within alarm, emergency call, and signalling system installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis sensor is meant to work as the replaceable sensing element for the Vimar Gas Stop GPL detector 01895. It is a like-for-like spare part for that detector family and does not change the system into a methane or multi-gas detector.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eReplace the sensor in the same mounting position used by the original unit, and secure the wiring so it cannot rub on sharp edges or move with vibration. LPG is heavier than air, so the sensing point is typically kept low in the compartment being monitored, close to likely leak points such as cylinder lockers and regulator connections.\u003c\/p\u003e\u003cp\u003eKeep the sensor area open to the compartment air and avoid locations that routinely collect standing water or get hit by direct spray.\u003c\/p\u003e\u003ch6\u003eMaintenance and checks\u003c\/h6\u003e\u003cp\u003eAfter installation, confirm normal operation using the test method specified for your existing detector setup. Keep the sensing area clear of paint, sealants, and strong solvents, since contamination can affect how a gas sensor responds over time.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269524320437,"sku":"QBP868609","price":207.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300240_qbp868609.webp?v=1771544425"},{"product_id":"qbp863786","title":"Vimar Torch Battery, For Eikon Arké Plana Idea, Ni-MH 4.8V 80mAh","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM00910 is a rechargeable Ni-MH battery pack (4.8 V, 80 mAh) used as the replacement battery for Vimar electronic hand lamps. It is made for the civil series emergency flashlights used with Eikon, Arké, Plana, and Idea installations, where the hand lamp docks into its base for charging and is ready to grab during a power loss.\u003c\/p\u003e\u003cp\u003eThis is the battery pack only, meant to restore normal run-time and charging behavior on an existing hand lamp that takes a 4.8 V Ni-MH pack. The pack itself weighs 18 g, so it stays in line with the way the lamp fits and handles once installed.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRechargeable Ni-MH battery pack for Vimar electronic hand lamps\u003c\/li\u003e\n\u003cli\u003eNominal voltage: 4.8 V\u003c\/li\u003e\n\u003cli\u003eCapacity: 80 mAh\u003c\/li\u003e\n\u003cli\u003eBattery pack format (pre-assembled pack), not loose individual cells\u003c\/li\u003e\n\u003cli\u003eCompatible application: civil series emergency flashlights for Eikon, Arké, Plana, and Idea\u003c\/li\u003e\n\u003cli\u003eNot intended for rapid charging\u003c\/li\u003e\n\u003cli\u003eBattery weight: 18 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eUse this battery only when the installed hand lamp is the Vimar type that uses a 4.8 V Ni-MH pack in the Eikon, Arké, Plana, or Idea civil series emergency flashlight setup. Before ordering, match the voltage and chemistry on the battery already in your lamp, since the charging circuit is built around that battery type.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eReplace the pack with the lamp removed from its charging base and with power to the base turned off if it is hardwired into the boat. Once the housing is opened, swap the pack like-for-like and keep polarity and routing the same as the original so the lamp seats back into the base cleanly.\u003c\/p\u003e\u003cp\u003eAfter replacement, let the hand lamp complete a normal charge cycle in its base before relying on it for emergency use.\u003c\/p\u003e\u003ch6\u003eElectrical and charging notes\u003c\/h6\u003e\u003cp\u003eThis battery pack is for the hand lamp’s internal circuit and charging base, not for direct connection to 12 V or 24 V boat power. Charge it using the existing hand lamp cradle and avoid fast-charge equipment that is not meant for this pack.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a practical match for boats already fitted with Vimar civil-series modules where a removable emergency hand lamp is part of the interior safety setup, such as near the companionway, nav station, or cabins. It keeps that built-in grab light ready without changing the lamp or the mounting hardware.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRechargeable packs last longer when they are kept topped up and stored in their normal charging location rather than left fully discharged. Dispose of the old pack through a battery recycling program appropriate for Ni-MH batteries.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269527859381,"sku":"QBP863786","price":24.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300192_qbp863786.jpg?v=1771544440"},{"product_id":"qbp871456","title":"Vimar Incandescent Lamp, 24V, 3W, 7x31mm, White Light","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM07055 is a 24 V, 3 W incandescent festoon lamp in the 7 mm by 31 mm format for small onboard illumination points and indicator modules that use this lamp size.\u003c\/p\u003e\u003cp\u003eIt produces white light and fits holders that accept a 31 mm festoon with a lamp body around 8 mm by 15 mm, which matters when the lamp sits behind a tight lens or switch window. This is a straightforward replacement part for keeping compatible controls and small fixtures readable on 24 V DC systems.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e24 V, 3 W incandescent lamp for 24 V DC circuits\u003c\/li\u003e\n\u003cli\u003eFestoon size: 7 mm diameter and 31 mm length\u003c\/li\u003e\n\u003cli\u003eLamp body section around 8 mm by 15 mm for clearance behind lenses and caps\u003c\/li\u003e\n\u003cli\u003eWhite light output for indicator windows and small task points\u003c\/li\u003e\n\u003cli\u003eIncandescent lamp works on DC without polarity sensitivity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMatch the lamp type and size to what is already installed. Festoon holders vary by length, and a few millimeters can decide whether the end contacts seat properly and whether the cover closes without pressure on the glass.\u003c\/p\u003e\u003cp\u003eConfirm the holder supports the 31 mm festoon length and that the lamp body clears any diffuser, lens, or switch window. If the old lamp shows heat marks on the lens, check there is enough clearance and ventilation before fitting the new one.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis lamp is for nominal 24 V systems. On 12 V it will glow weakly; on higher voltage it will have a short life and can overheat the fixture.\u003c\/p\u003e\u003cp\u003eAt 24 V and 3 W, current draw is about 0.13 A. Make sure the circuit and contacts are clean and snug so vibration does not cause flicker.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eTurn off power at the panel and let the fixture cool before handling the lamp. Remove the cover or module window as required, then lift the festoon out of its spring contacts and seat the new lamp evenly so both ends are fully engaged.\u003c\/p\u003e\u003cp\u003eAfter reinstalling the lens or cover, power the circuit back up and check for steady light. If it flickers underway, the holder contacts usually need cleaning or a slight re-tensioning.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis lamp makes sense on boats and yachts that run 24 V DC and use small indicator lights in switch panels, control stations, or compact interior fixtures where the 7 x 31 mm festoon format is used. It is also a good match when you want the same look and output as the original incandescent lamp rather than switching the fixture to LED.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eSalt air and humidity can leave a film on contacts over time. If a lamp change does not restore steady operation, clean the end contacts and the holder springs, and inspect for heat-darkened lenses that can reduce visibility.\u003c\/p\u003e\u003cp\u003eKeeping a spare on board helps for panel indicators and small utility lights, especially on offshore runs where a quick swap is easier than troubleshooting a dim or intermittent lamp at night.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269562691765,"sku":"QBP871456","price":6.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300303_qbp871456.jpg?v=1771544614"},{"product_id":"qbp892805","title":"Vimar Joint Plate for Flush-Mount Junction Boxes, Yellow, For Built-In and Central Conduit Boxes","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMV70191 is a yellow joint plate for flush mounting junction boxes, used to couple boxes as part of a recessed installation. It is suitable for built-in installation boxes and for central conduit boxes, making it a practical accessory when you are building out junction points behind panels, inside lockers, or within interior bulkheads.\u003c\/p\u003e\u003cp\u003eOn board, this kind of small hardware matters when you are trying to keep wiring runs tidy and junctions accessible. It helps you join junction box sections in a clean way so covers line up and the installation stays serviceable when you come back later for troubleshooting or upgrades.\u003c\/p\u003e\u003cp\u003eThe yellow finish also makes the joint easier to spot during a refit, especially in crowded service spaces where multiple boxes and conduits meet.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eJoint plate accessory for flush mounting junction boxes\u003c\/li\u003e\n\u003cli\u003eSuitable for built-in installation boxes\u003c\/li\u003e\n\u003cli\u003eSuitable for central conduit boxes\u003c\/li\u003e\n\u003cli\u003eYellow color helps with quick identification during installs and maintenance\u003c\/li\u003e\n\u003cli\u003eSupports clean, aligned junction box runs when multiple recessed boxes are installed together\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis part is intended for Vimar junction box systems used in flush-mount applications. Confirm your existing box type and layout match the Vimar recessed box and conduit box formats before ordering, especially if you are tying into an older installation or mixing components from different electrical systems on the boat.\u003c\/p\u003e\u003cp\u003eFor best long-term serviceability, plan the junction box location so the cover remains reachable after interior panels and liners are back in place, and leave enough slack for future re-terminations.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the joint plate during the dry-fit stage while the boxes are still accessible in the cutout. Once the boxes are aligned and secured, route conductors with clear bend radius and strain relief so movement and vibration do not transfer load into the terminations.\u003c\/p\u003e\u003cp\u003eLabel circuits at the junction box and keep splices organized inside the enclosure. That small step saves a lot of time later when you are chasing a fault or adding equipment.\u003c\/p\u003e\u003ch6\u003eOnboard use notes\u003c\/h6\u003e\u003cp\u003eThis accessory is commonly used in protected interior spaces such as behind helm consoles, inside cabinetry, or within technical compartments where wiring splits to lighting, pumps, electronics, or auxiliaries. If the junction area is exposed to spray or washdowns, the enclosure choice and sealing method should be appropriate for that location.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDuring seasonal checks, inspect the junction box area for loose conductors, chafe points, or signs of moisture. Keeping junctions clean, supported, and easy to identify helps prevent intermittent faults and speeds up troubleshooting when you are underway.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269575405749,"sku":"QBP892805","price":1.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300613_qbp892805.jpg?v=1771544670"},{"product_id":"qbp924647","title":"Vimar LINEA 1-Module Blank Module, 250V, IP40, Built-In, Thermoplastic, Halogen-Free","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar LINEA blank 1-module is a flush-fit insert used to close an unused 1-module opening in a LINEA wiring layout. It is made from halogen-free thermoplastic with a matt surface, carries an IP40 protection rating, and measures 22.20 x 52.80 x 15.80 mm.\u003c\/p\u003e\u003cp\u003eThis is a small finishing part, but it matters when you want a switch panel or control point to look complete and stay easier to clean. On board, it makes sense anywhere a LINEA frame has a spare position in a protected interior area such as the cabin, chart table, service panel, or helm console that is kept away from direct washdown.\u003c\/p\u003e\u003cp\u003eThe insert has no contacts, no lighting, and no marking window. It simply blanks the opening while keeping the face of the installation neat and consistent with the rest of the LINEA range.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module blank insert for unused positions in Vimar LINEA modular installations\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with a matt finish\u003c\/li\u003e\n\u003cli\u003eIP40 protection rating for sheltered interior mounting locations\u003c\/li\u003e\n\u003cli\u003eCompact size of 22.20 x 52.80 x 15.80 mm for standard 1-module fit within the LINEA system\u003c\/li\u003e\n\u003cli\u003eNo contacts, no lighting, and no label window, so it works purely as a clean closure piece\u003c\/li\u003e\n\u003cli\u003eBuilt-in mounting format for flush installations using the LINEA modular arrangement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple color configurations within the same 1-module LINEA blank insert format.\u003c\/p\u003e\u003cp\u003eThe variation across the range is the visible finish color. The 1-module size, matt surface, thermoplastic construction, IP40 rating, and general fit within the LINEA modular system remain the same across the listed versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM30041.G: Color Black, RAL 7021. This finish blends into darker switch layouts and helps the blank insert stay visually discreet on black or mixed-color panels.\u003c\/li\u003e\n\u003cli\u003eVM30041.C: Color Canvas, RAL 7032. This lighter neutral tone works well where the surrounding trim uses softer beige or off-white shades.\u003c\/li\u003e\n\u003cli\u003eVM30041.B: Color White, RAL 9016. This option keeps the appearance clean and straightforward on white switch assemblies and light interior panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis insert is intended for Vimar LINEA modular installations and is sized as a single module. It is a good match when a frame or support has an unused opening that needs to be closed without changing the look of the rest of the switch assembly.\u003c\/p\u003e\u003cp\u003eFor marine refits, it suits installations where equipment layouts evolve over time and one position is left unused for now. It is most appropriate in dry interior spaces rather than exposed exterior locations, since the listed protection level is IP40.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eBecause this is a built-in modular part, fit should be checked against the existing Vimar LINEA support and cover arrangement already on the boat. Once installed, it leaves the panel face finished and avoids the open slot look that can collect dust and stand out visually.\u003c\/p\u003e\u003cp\u003eThis part makes sense for builders, refit yards, and owners who want a tidy LINEA switch panel while keeping the option to reconfigure that module position later.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Black","offer_id":52370967232693,"sku":"QBP924647-8","price":3.03,"currency_code":"USD","in_stock":false},{"title":"Canvas","offer_id":52370967265461,"sku":"QBP924647-5","price":3.03,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":52370967298229,"sku":"QBP924647-3","price":2.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1316446_qbp924647.jpg?v=1774056980"},{"product_id":"qbp924796","title":"Vimar E14 Lampholder, Smooth Skirt, Glass-Reinforced Polyester Resin","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar E14 Lampholder is a range of E14 Edison lampholders for replacing or building small light fittings where you need either an M10x1 nipple entry or a threaded dome entry. Across the range, the body uses glass-reinforced polyester resin and a smooth-skirt form, with black and white options available.\u003c\/p\u003e\u003cp\u003eFor boat refits, this is the kind of spare part used when the fixture itself is still serviceable but the holder needs replacing. It suits sheltered interior lights such as cabin, berth, chart table, or utility fittings that take an E14 lamp base, and where the existing holder layout matches the entry style of the version selected.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eE14 Edison lampholder format for fixtures built around the small screw lamp base\u003c\/li\u003e\n\u003cli\u003eGlass-reinforced polyester resin body with a smooth-skirt exterior\u003c\/li\u003e\n\u003cli\u003eRange includes black and white versions\u003c\/li\u003e\n\u003cli\u003eAvailable with either M10x1 nipple entry with locking screw or threaded dome entry\u003c\/li\u003e\n\u003cli\u003eCompact holder format that works well in small interior light fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range is offered in four configurations.\u003c\/p\u003e\u003cp\u003eWhat changes between them is the body color and the top entry style. The listed versions stay within the same E14 format and use the same smooth-skirt body construction.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM02121: black body with M10 nipple thread. This version fits setups built around a straight nipple connection with locking screw retention.\u003c\/li\u003e\n\u003cli\u003eVM02121.B: white body with M10 nipple thread. It keeps the same connection style with a white finish for lighter fixtures or trim.\u003c\/li\u003e\n\u003cli\u003eVM02121.S: black body with threaded dome entry. This version uses the dome-style top where the fixture is arranged around that shaped threaded entry.\u003c\/li\u003e\n\u003cli\u003e02121.S.B: white body with threaded dome entry. It matches the same dome-style arrangement in a white finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCheck the lamp base first: this holder is for E14 lamps only. Then check the upper connection on your fitting. Some versions use an M10x1 nipple with locking screw, while others use a threaded dome entry, so the replacement needs to match the way your existing light is built.\u003c\/p\u003e\u003cp\u003eThis range makes sense for owners, installers, and boatyards replacing worn holders in compact interior fixtures rather than changing the whole light assembly. It is best suited to enclosed or sheltered fittings where the complete light already handles moisture and spray protection.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis part sets the lamp cap format, not the boat's supply voltage by itself. Before ordering, confirm the complete fixture, lamp, and onboard circuit are all matched correctly, especially on 12V or 24V lighting systems where the bulb choice and fixture layout matter just as much as the holder.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Black \/ M10","offer_id":52370967429301,"sku":"QBP924796-8","price":3.24,"currency_code":"USD","in_stock":false},{"title":"White \/ M10","offer_id":52370967462069,"sku":"QBP924796-7","price":3.65,"currency_code":"USD","in_stock":false},{"title":"Black \/ Dome","offer_id":52370967494837,"sku":"QBP924796-2","price":2.57,"currency_code":"USD","in_stock":false},{"title":"White \/ Dome","offer_id":52370967527605,"sku":"QBP924796-3","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1316464_qbp924796.jpg?v=1774056985"},{"product_id":"qbp924835","title":"Vimar Plana 1M Blank Module, Built-In, Halogen-Free Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Plana Series is a range of interchangeable 1M blank modules used to close an unused position in a compatible modular plate or support frame. Each module measures 22.3 x 49.0 x 20.5 mm, mounts flush, and fixes with claws, so it works as a finishing piece when a switch point, outlet position, or future control location is not currently in use.\u003c\/p\u003e\u003cp\u003eOn board, this part fits best in cabin walls, service spaces, or control panels that already use Vimar Plana modular hardware. It is a non-powered component with nominal voltage 0 V, so it does not connect to the vessel's 12V or 24V supply. Its role is to close the opening, keep the faceplate tidy, and leave the layout ready for later changes.\u003c\/p\u003e\u003cp\u003eThe body is thermoplastic and halogen-free, with a glossy visible face across the range. This family is available in white, silver, and white with antibacterial treatment, which makes it easier to match the finish already installed on the boat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1M blank module format for unused openings in Vimar Plana modular assemblies\u003c\/li\u003e\n\u003cli\u003e22.3 x 49.0 x 20.5 mm body size for checking fit in existing plates and supports\u003c\/li\u003e\n\u003cli\u003eFlush-mounted installation with claw fastening\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction that is halogen-free\u003c\/li\u003e\n\u003cli\u003eGlossy face in white, silver, or white with antibacterial treatment depending on variant\u003c\/li\u003e\n\u003cli\u003eNominal voltage 0 V, confirming this is a cover component rather than a live control device\u003c\/li\u003e\n\u003cli\u003eInformation surface present, which can help identify reserved positions on a panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in three finish configurations within the same 1M Plana format.\u003c\/p\u003e\u003cp\u003eThe varying point across these versions is the visible color and surface treatment. The 1M layout, 22.3 x 49.0 x 20.5 mm dimensions, flush-mounted installation, claw fastening, glossy surface, thermoplastic body, and halogen-free construction stay the same.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM14041.SL: Color Silver. This version has a silver face with a glossy lacquered finish for installations that already use silver Plana trim.\u003c\/li\u003e\n\u003cli\u003eVM14041: Color White. This is the standard white version with a glossy untreated surface for a uniform look on white Plana plates.\u003c\/li\u003e\n\u003cli\u003eVM14041.AB: Color White\/Antibacterial. This version keeps the white appearance and adds antibacterial treatment for panels in shared interior spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis module belongs to the Vimar Plana range, so fit should be checked against Plana 1M supports and cover plates rather than treated as a universal blank. That matters on a boat where previous refits may have mixed more than one switch series in the same cabin or control area.\u003c\/p\u003e\u003cp\u003eBecause it uses built-in mounting and claw fastening, it suits flush-mounted assemblies where the support and opening are already in place. The compact depth helps when working in shallow wall cavities or panel spaces where room behind the faceplate is limited.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eThis part is commonly fitted during a refit, after removing a device, or when leaving space for a later upgrade. It closes the opening neatly and keeps the front of the installation finished instead of leaving a visible gap in the plate.\u003c\/p\u003e\u003cp\u003eFor marine use, it makes the most sense anywhere the vessel already uses Vimar Plana modules inside accommodation or protected control areas. It is also a practical spare for tidying an old opening, reserving a future circuit position, or keeping a multi-gang panel visually consistent after changes to the electrical layout.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Silver","offer_id":52370967658677,"sku":"QBP924835-7","price":2.88,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":52370967691445,"sku":"QBP924835-8","price":1.7,"currency_code":"USD","in_stock":true},{"title":"White\/Antibacterial","offer_id":52370967724213,"sku":"QBP924835-6","price":1.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1316455_qbp924835.jpg?v=1774056995"},{"product_id":"qbp920119","title":"Vimar Shade Holder Ring, For E27 Lampholders, Threaded Skirt","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Vimar shade holder ring for E27 lampholders is a threaded retaining ring used to secure a shade on compatible E27 lampholders. It is made from glass-reinforced polyester resin and measures 55 mm in diameter with a 15 mm height, so it stays compact while covering the threaded front of the holder.\u003c\/p\u003e\u003cp\u003eThis is an accessory part rather than the lampholder itself. The key fit point is an E27 holder with a threaded skirt, which is what allows the ring to clamp the shade in place. For marine refits and routine maintenance, that matters more than bulb choice alone.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits E27 lampholders with a threaded skirt\u003c\/li\u003e\n\u003cli\u003eGlass-reinforced polyester resin body\u003c\/li\u003e\n\u003cli\u003e55 mm diameter and 15 mm height\u003c\/li\u003e\n\u003cli\u003eOpaque finish available in black or white\u003c\/li\u003e\n\u003cli\u003eAccessory ring only, not the lampholder\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two color configurations for the same shade-holder ring format.\u003c\/p\u003e\u003cp\u003eThe difference between variants is color. The threaded E27 application, overall size, and base construction remain the same across both versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM02109: Black. A straightforward match for dark lampholders, trim, or fittings where the ring should blend into the surround.\u003c\/li\u003e\n\u003cli\u003eVM02109.B: White. A cleaner visual match for white fittings and lighter interior lamp assemblies.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis ring suits fittings that use an E27 lampholder with external threads for a retaining ring. Before ordering, check the holder style on the light already installed, since a plain or unthreaded E27 holder will not accept this ring. The ring is opaque and works as a mechanical shade retainer, not as an electrical part.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eOn board, this part is usually used when a cabin or utility light still has a serviceable E27 holder but needs a replacement ring to hold the shade correctly. Fit the shade over the threaded skirt and screw the ring down evenly by hand until the shade is held in place without forcing the resin body.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats that use simple E27 light assemblies and need a like-for-like ring in black or white. It makes the most sense for interior lights, berth lights, or service-area fixtures where the existing holder is staying in place and only the shade-retaining ring needs to be replaced.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Black","offer_id":52370967855285,"sku":"QBP920119-2","price":0.62,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":52370967888053,"sku":"QBP920119-3","price":0.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1316330_qbp920119.jpg?v=1774057000"},{"product_id":"qbp922346","title":"Vimar Arké 1-Module Interchangeable Button, Non-Lightable, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar ARKÉ Series 1 Module Interchangeable Button is a non-lightable 1-module rocker front for compatible ARKÉ switch and push-button devices. It uses halogen-free thermoplastic with a matt finish, carries an IP40 rating, and the documented module size is 22 x 44.2 x 6.7 mm.\u003c\/p\u003e\u003cp\u003eThis is the visible button rather than the electrical mechanism behind it. On board, it makes sense when you need to replace a worn or mismatched front on an existing ARKÉ installation in a protected interior panel such as a cabin, helm, or utility switch bank that stays out of direct spray.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module interchangeable rocker front for compatible ARKÉ switch or push-button assemblies\u003c\/li\u003e\n\u003cli\u003eSmooth non-lightable face for panels that do not use an illuminated control\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic construction with a matt surface\u003c\/li\u003e\n\u003cli\u003eIP40 protection for protected interior installations\u003c\/li\u003e\n\u003cli\u003eDocumented 22 x 44.2 x 6.7 mm format for consistent fit within the ARKÉ modular range\u003c\/li\u003e\n\u003cli\u003eConfigured for switch or push-button use and built without a label area or exchangeable lens\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in three colour configurations so an existing ARKÉ panel can be matched without changing the rest of the layout.\u003c\/p\u003e\u003cp\u003eThe visible colour and surface protection change between variants. Across the documented range, the button remains a smooth non-lightable 1-module rocker in halogen-free thermoplastic with a matt finish and IP40 protection.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM19038: Color Grey, untreated matt surface, similar RAL 7015. This keeps the standard grey ARKÉ appearance for panels already built around the grey finish.\u003c\/li\u003e\n\u003cli\u003eVM19038.M: Color Metal, lacquered matt surface, similar RAL 9007. This gives the front a metallic look while keeping the same 1-module non-lightable format.\u003c\/li\u003e\n\u003cli\u003eVM19038.B: Color White, untreated matt surface, similar RAL 9016. This matches white ARKÉ panels where a lighter face is already in use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis part belongs to the ARKÉ range and should be matched by series and module size before ordering. It is intended for switch or push-button use in the ARKÉ system, and it does not add illumination.\u003c\/p\u003e\u003cp\u003eIP40 protection makes it suitable for protected interior panels rather than exposed deck or washdown locations. It is a good match for owners and installers replacing a damaged front button in an ARKÉ cabin, helm, or service-area panel while keeping the original finish and layout consistent.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey","offer_id":52370968051893,"sku":"QBP922346-3","price":2.57,"currency_code":"USD","in_stock":true},{"title":"Metal","offer_id":52370968084661,"sku":"QBP922346-8","price":3.75,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":52370968117429,"sku":"QBP922346-9","price":2.38,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1316342_qbp922346.jpg?v=1774057013"},{"product_id":"qbp923160","title":"Vimar LINEA 1\/2M Blank Module, Halogen-Free, IP40, Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar LINEA Series is a 1\/2M blank module for closing an unused half-module opening in a flush-mounted modular installation. It keeps the front of the assembly clean and finished while preserving the layout of a LINEA switch or control position. Across the listed variants, the module body measures 11.0 mm wide, 52.8 mm high, and 14.3 mm deep, with an IP40 protection rating for protected interior locations.\u003c\/p\u003e\u003cp\u003eThis insert is made from halogen-free thermoplastic with a matt untreated surface and uses claw-and-screw fastening in a built-in format. It has no contacts, no lighting, and no signal lamp, so its role is straightforward: cover the spare position neatly and leave the surrounding installation looking complete.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1\/2M format for closing an unused half-module space in a Vimar LINEA modular assembly\u003c\/li\u003e\n\u003cli\u003eBuilt-in mounting format with claw-and-screw fastening\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with a matt surface finish\u003c\/li\u003e\n\u003cli\u003eIP40 rating for protected indoor and enclosed panel locations\u003c\/li\u003e\n\u003cli\u003eCompact front size of 11.0 x 52.8 mm with a depth of 14.3 mm\u003c\/li\u003e\n\u003cli\u003eNo switching contacts, light source, or signal lamp, so it functions purely as a blank cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis module is offered in multiple color finishes within the same LINEA 1\/2M format.\u003c\/p\u003e\u003cp\u003eAcross the listed variants, the size, mounting method, thermoplastic construction, matt finish, and IP40 protection stay the same. What changes is the visible front color, so the blank can match the surrounding LINEA devices and trim more closely.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM30040.G: Black, RAL 7021. This finish blends into darker switch layouts and trim details where a lower-contrast front is preferred.\u003c\/li\u003e\n\u003cli\u003eVM30040.C: Canvas, RAL 7032. This is a softer neutral tone that suits warmer interiors and installations that do not call for a bright white insert.\u003c\/li\u003e\n\u003cli\u003eVM30040.B: White, RAL 9016. This finish fits cleanly into light-colored panels and white LINEA assemblies.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis part is meant for LINEA modular assemblies where a half-module position needs to be blanked off without leaving an exposed gap. It is useful during refits, panel cleanups, and staged installations where one space is being left unused for the time being.\u003c\/p\u003e\u003cp\u003eOn board, it makes the most sense in protected interior areas such as cabins, interior switch panels, and enclosed helm consoles that stay out of direct spray. The IP40 rating suits dry locations and routine handling, rather than exposed deck positions or washdown-prone spaces.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Black","offer_id":52370968346805,"sku":"QBP923160-4","price":2.61,"currency_code":"USD","in_stock":false},{"title":"Canvas","offer_id":52370968379573,"sku":"QBP923160-8","price":2.61,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":52370968412341,"sku":"QBP923160-2","price":2.83,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1316365_qbp923160.jpg?v=1774057023"},{"product_id":"qbp919516","title":"Vimar E27 Lampholder, Threaded Skirt, Glass-Reinforced Polyester Resin","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar 02107 E27 lampholder is a replacement lampholder range for E27 screw-base light fittings, with black or white bodies and two different threaded entry styles depending on the version. Across the family, the holder body is made from glass-reinforced polyester resin and uses a threaded skirt construction.\u003c\/p\u003e\u003cp\u003eThe M10 versions use an M10x1 nipple with a locking screw, while the S versions use a dome with shaped threaded entry. That difference matters when you are replacing an existing holder in a cabin light, berth light, utility light, or another onboard fitting where the new part needs to match the original hardware and body style.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eE27 Edison lampholder format for fixtures that use a standard E27 screw-base lamp\u003c\/li\u003e\n\u003cli\u003eGlass-reinforced polyester resin body\u003c\/li\u003e\n\u003cli\u003eThreaded skirt construction across the full range\u003c\/li\u003e\n\u003cli\u003eAvailable in black and white finishes\u003c\/li\u003e\n\u003cli\u003eVariant-specific entry styles: M10x1 nipple with locking screw or dome with shaped threaded entry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product family is offered in four configurations.\u003c\/p\u003e\u003cp\u003eWhat changes between variants is the finish and the threaded entry style. The common points across the range are the E27 lampholder format, threaded skirt body, and glass-reinforced polyester resin construction.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM02107.S: black finish, threaded skirt, dome with shaped threaded entry. This version matches fittings built around the dome-style threaded entry rather than an M10x1 nipple.\u003c\/li\u003e\n\u003cli\u003eVM02107.S.B: white finish, threaded skirt, dome with shaped threaded entry. It keeps the same dome-style entry while changing the visible finish to white.\u003c\/li\u003e\n\u003cli\u003eVM02107: black finish, threaded skirt, M10x1 nipple with locking screw. This version matches fixtures that use the M10x1 threaded nipple arrangement.\u003c\/li\u003e\n\u003cli\u003eVM02107.B: white finish, threaded skirt, M10x1 nipple with locking screw. It keeps the M10x1 nipple arrangement and changes the visible finish to white.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis range is a good match when the existing light fitting is still serviceable and the holder itself is the part that needs replacement. On a boat, that usually means matching the original holder by lamp base, thread entry style, and visible finish rather than trying to adapt a different body into the fixture.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm that your light uses an E27 lamp, check whether the current holder is built around an M10x1 nipple or a dome-style threaded entry, and make sure the skirt style matches the space inside the fitting. For exposed or wet locations, the sealing and corrosion resistance of the complete fixture still depend on the rest of the housing, hardware, and wiring arrangement.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eWhen replacing a lampholder, it helps to inspect the old unit for heat marks, cracked insulation, or thread damage around the mounting point before reassembly. On marine refit work, it is also worth checking nearby terminals, fasteners, and the inside of the light body for corrosion so the new holder is not installed into a compromised fixture.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Black Threaded Skirt \/ Dome","offer_id":52370972147893,"sku":"QBP919516-8","price":3.47,"currency_code":"USD","in_stock":false},{"title":"White Threaded Skirt \/ Dome","offer_id":52370972180661,"sku":"QBP919516-1","price":3.94,"currency_code":"USD","in_stock":false},{"title":"Black Threaded Skirt \/ M10","offer_id":52370972213429,"sku":"QBP919516-2","price":4.37,"currency_code":"USD","in_stock":false},{"title":"White Threaded Skirt \/ M10","offer_id":52370972246197,"sku":"QBP919516-9","price":4.83,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1316326_qbp919516.jpg?v=1774057153"},{"product_id":"qbp919764","title":"Vimar PLANA 2M Blank Module, Built-In, Claw Mount, Halogen-Free","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar PLANA is a 2-module blank module used to close an unused opening in a flush-mounted PLANA wiring assembly. It has a 44.70 x 49.00 x 21.50 mm body, built-in mounting with claw fastening, and a nominal voltage of 0 V because it is a cover module rather than an active device.\u003c\/p\u003e\u003cp\u003eOn a boat already fitted with Vimar PLANA components, it keeps a spare 2-module position covered without changing the rest of the plate layout. The body is made from halogen-free thermoplastic and the visible face has a glossy finish, so it suits tidy interior panel work where an unused position still needs a finished look.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module blank module for Vimar PLANA wiring systems\u003c\/li\u003e\n\u003cli\u003eBuilt-in mounting format with claw fastening\u003c\/li\u003e\n\u003cli\u003e44.70 mm width, 49.00 mm height, and 21.50 mm depth\u003c\/li\u003e\n\u003cli\u003eNominal voltage 0 V, with no monitoring contact\u003c\/li\u003e\n\u003cli\u003eThermoplastic body that is halogen-free\u003c\/li\u003e\n\u003cli\u003eGlossy visible surface with label or information area\u003c\/li\u003e\n\u003cli\u003eAvailable in white RAL 9003 and silver RAL 9006\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two finish options within the same 2-module PLANA format.\u003c\/p\u003e\u003cp\u003eAcross these variants, the size stays at 44.70 x 49.00 x 21.50 mm and the mounting format remains built-in with claw fastening. The visible finish changes between white RAL 9003 and silver RAL 9006, and the silver version uses a lacquered surface while the white version has an untreated surface.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM14042: White finish, RAL 9003, glossy front surface. This version matches white PLANA layouts and keeps an unused position visually unobtrusive.\u003c\/li\u003e\n\u003cli\u003eVM14042.SL: Silver finish, RAL 9006, glossy lacquered front surface. This version suits PLANA layouts where the surrounding trim or modules are in silver.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCheck that your installation uses the Vimar PLANA series and that the spare opening is a 2-module position. This is a blanking piece, not a live accessory, so it does not add switching, socket, or network function.\u003c\/p\u003e\u003cp\u003eIt is a sensible part for refits, service replacements, and panel clean-up work on boats that already use PLANA wiring devices in cabins, helm areas, or other protected interior spaces. It also works well when a circuit has been removed for now but the opening still needs to stay covered and finished.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":52370972278965,"sku":"QBP919764-5","price":1.8,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":52370972311733,"sku":"QBP919764-2","price":2.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1315781_qbp919764.jpg?v=1774057157"},{"product_id":"qbp929354","title":"Vimar EIKON Four Interchangeable Half-Buttons, 1 Module, IP40, Clamp Mounting, Halogen-Free Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar EIKON Series 1 Module Four Interchangeable Half Buttons is a 1-module set of four interchangeable half-buttons for compatible switch or push-button control points. It uses halogen-free thermoplastic with a matt finish, clamp mounting, a monitoring window or light outlet, and IP40 protection. Nominal dimensions are 22.3 x 22.1 x 5.7 mm.\u003c\/p\u003e\u003cp\u003eThis is a trim and control-element part rather than a powered electrical device, so the main buying checks are the matching EIKON family, the 1-module format, and the symbol printed on the front. On board, it makes the most sense for protected interior panels such as an enclosed helm, cabin switch bank, or service area where the installation is kept away from washdowns and direct weather.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module format with four interchangeable half-buttons for compatible Vimar EIKON switch or push-button positions.\u003c\/li\u003e\n\u003cli\u003eAvailable with I, O, I\/O, or regulation symbols to keep switch functions clearly marked.\u003c\/li\u003e\n\u003cli\u003eGrey and white versions use an untreated matt surface, while silver versions use a lacquered matt finish.\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic construction with a monitoring window or light outlet.\u003c\/li\u003e\n\u003cli\u003eIP40-rated front piece with clamp mounting for sheltered interior panel locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range changes in two ways: the printed symbol and the finish color. Symbol options are I, O, I\/O, and regulation symbol. Finish options are grey, white, and silver, so the same control point can be matched to the panel style and the function it operates.\u003c\/p\u003e\u003cp\u003eAcross the range, the format stays the same at 1 module with four interchangeable half-buttons, clamp mounting, thermoplastic construction, a matt surface, a monitoring window or light outlet, and IP40 protection.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit depends on the matching Vimar EIKON support and the underlying 1-module switch or push-button mechanism already installed in the panel. These half-buttons are control and cover parts, so they are used to restore the correct look and symbol layout on an existing control point rather than to change the electrical function behind it.\u003c\/p\u003e\u003cp\u003eThis is a sensible replacement for boats that already use Vimar interior switching components and need worn, mismatched, or incorrectly marked button faces brought back into line. For exposed exterior locations, the IP40 rating points to use in protected areas instead of open deck positions.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eClamp mounting keeps installation straightforward when replacing like-for-like parts within an EIKON panel. The monitoring window or light outlet is useful where the underlying mechanism uses a locator or indicator light, which helps keep switch status visible in low-light cabin or helm conditions.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey \/ I Symbol","offer_id":52371001868469,"sku":"QBP929354-3","price":17.1,"currency_code":"USD","in_stock":false},{"title":"Silver \/ I Symbol","offer_id":52371001901237,"sku":"QBP929354-0","price":20.66,"currency_code":"USD","in_stock":false},{"title":"Grey \/ I\/O Symbols","offer_id":52371001934005,"sku":"QBP929354-7","price":17.1,"currency_code":"USD","in_stock":false},{"title":"Silver \/ I\/O Symbols","offer_id":52371001966773,"sku":"QBP929354-5","price":20.66,"currency_code":"USD","in_stock":false},{"title":"Grey \/ O Symbol","offer_id":52371001999541,"sku":"QBP929354-4","price":0.0,"currency_code":"USD","in_stock":false},{"title":"Silver \/ O Symbol","offer_id":52371002032309,"sku":"QBP929354-1","price":20.66,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Regulation Symbol","offer_id":52371002065077,"sku":"QBP929354-8","price":17.1,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Regulation Symbol","offer_id":52371002097845,"sku":"QBP929354-9","price":20.66,"currency_code":"USD","in_stock":false},{"title":"White \/ I\/O Symbols","offer_id":52371002130613,"sku":"QBP929354-2","price":17.1,"currency_code":"USD","in_stock":false},{"title":"White \/ O Symbol","offer_id":52371002163381,"sku":"QBP929354-52","price":17.1,"currency_code":"USD","in_stock":false},{"title":"White \/ Regulation Symbol","offer_id":52371002196149,"sku":"QBP929354-32","price":17.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1316636_qbp929354.jpg?v=1774057524"},{"product_id":"qbp931787","title":"Vimar Plana 1-Module Interchangeable Button, Lightable Diffuser, IP40, Halogen-Free","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Plana Series is a range of 1-module interchangeable buttons with a lightable diffuser for switch or push-button positions in Plana installations. Each version keeps the same compact 22.2 x 43.7 x 7.9 mm format and IP40 protection, so it suits interior control points where you want a clean illuminated face and clear room-status marking.\u003c\/p\u003e\u003cp\u003eThis is the visible front button rather than a complete powered control unit. It uses thermoplastic construction, a glossy finish, clamp mounting, and a built-in light outlet in the diffuser. On board, that makes it useful in cabins, corridors, heads, and service areas where a small illuminated button can help identify functions or room status without taking extra panel space.\u003c\/p\u003e\u003cp\u003eBecause it is an IP40 component, it is better suited to protected interior locations than exposed exterior positions. For refit work, the 1-module size matters just as much as the finish and symbol, since it needs to match the Plana layout already on the vessel or in the accommodation space.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module interchangeable button for Vimar Plana switch or push-button positions.\u003c\/li\u003e\n\u003cli\u003eLightable diffuser with monitoring window for illuminated indication at the control point.\u003c\/li\u003e\n\u003cli\u003eAvailable in white or silver, with plain, Do Not Disturb, or Please Clean front markings.\u003c\/li\u003e\n\u003cli\u003eThermoplastic body that is halogen-free, with glossy surface finishing.\u003c\/li\u003e\n\u003cli\u003eClamp-mounted format with IP40 protection for protected interior installations.\u003c\/li\u003e\n\u003cli\u003eCompact size of 22.2 x 43.7 x 7.9 mm for tight switch panels and modular plates.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range changes mainly by finish and front symbol. The listed versions are offered in white or silver, with either a plain face, a Do Not Disturb symbol, or a Please Clean symbol.\u003c\/p\u003e\u003cp\u003eThat makes the family easy to match to the look of the panel and the way the space is used. Plain versions keep the face neutral for general switching, while the marked versions are more suitable where crew or guests need a clear visual cue at the door or inside a cabin area.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit is straightforward when the installation already uses the Vimar Plana modular system and needs a 1-module front button with diffuser. The button is intended for domestic switching-device positions and for switch or push-button use, so it is a trim and control element rather than a standalone electronic accessory.\u003c\/p\u003e\u003cp\u003eFor marine projects, this matters most in interior refits where panel consistency is important across cabins and passageways. The white finish aligns with a clean low-contrast look, while silver gives more visual separation on the plate without changing the module size.\u003c\/p\u003e\u003ch6\u003eInstallation and onboard use\u003c\/h6\u003e\u003cp\u003eThe clamp-mounted format helps during replacement work because the button can be swapped without changing the overall plate layout. The illuminated diffuser is useful in low ambient light, especially on overnight passages or in accommodation spaces where you want the control point to remain easy to spot.\u003c\/p\u003e\u003cp\u003eThis product is a sensible match for builders and refit teams maintaining guest areas, crew spaces, or interior service zones on yachts and commercial vessels. It is less suited to washdown zones, open cockpits, or other exposed locations where a higher level of ingress protection would be needed.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Silver \/ Do Not Disturb","offer_id":52371005866165,"sku":"QBP931787-5","price":4.37,"currency_code":"USD","in_stock":false},{"title":"White \/ Do Not Disturb","offer_id":52371005898933,"sku":"QBP931787-8","price":3.56,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Please Clean","offer_id":52371005931701,"sku":"QBP931787-6","price":4.37,"currency_code":"USD","in_stock":false},{"title":"White \/ Please Clean","offer_id":52371005964469,"sku":"QBP931787-7","price":3.56,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Simple","offer_id":52371005997237,"sku":"QBP931787-1","price":4.13,"currency_code":"USD","in_stock":false},{"title":"White \/ Simple","offer_id":52371006030005,"sku":"QBP931787-2","price":3.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1316767_qbp931787.jpg?v=1774057591"},{"product_id":"qbp929098","title":"Vimar Eikon Four Spare 1-Module Interchangeable Half-Button Caps, KNX, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar EIKON series 1-module four half-button cap set is a spare control element for compatible Vimar EIKON switch or push-button controls. It uses four interchangeable half-button caps in one 1-module position, includes a monitoring window\/light outlet, and measures 22.30 x 22.10 x 5.70 mm.\u003c\/p\u003e\u003cp\u003eThis is the visible cap set rather than the switching mechanism behind it, so it matters when you are replacing worn or marked buttons while keeping the existing control assembly in place. The caps are made from halogen-free thermoplastic with a matt surface, and the rated protection is IP40.\u003c\/p\u003e\u003cp\u003eOn board, it fits places inside the cabin, interior lighting controls, or a sheltered helm station where Vimar EIKON trim is already installed. IP40 suits indoor use and is not for open deck positions or areas that get direct washdown.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSpare 1-module set with four interchangeable half-button caps\u003c\/li\u003e\n\u003cli\u003eFor switch or push-button use on compatible Vimar EIKON controls\u003c\/li\u003e\n\u003cli\u003eMonitoring window\/light outlet remains available in the cap design\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with matt finish\u003c\/li\u003e\n\u003cli\u003eIP40 rating for protected interior installations\u003c\/li\u003e\n\u003cli\u003eCompact size of 22.30 x 22.10 x 5.70 mm\u003c\/li\u003e\n\u003cli\u003eRange includes neutral-face and direction-arrow versions\u003c\/li\u003e\n\u003cli\u003eAvailable in grey RAL 7024, white RAL 9016, and silver RAL 9022\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range changes by face marking and finish color. The listed versions are available with a neutral face or with direction arrow symbols, and in grey, white, or silver. The silver option corresponds to the Next finish.\u003c\/p\u003e\u003cp\u003eThe grey and white versions use an untreated surface, while the silver versions are lacquered. Across the listed variants, the matt surface, IP40 rating, monitoring window\/light outlet, and 22.30 x 22.10 x 5.70 mm size remain the same.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMatch this spare part to a Vimar EIKON 1-module button assembly before ordering. It is a cover\/control element for domestic switching devices, uses clamp mounting, and suits switch or push-button applications, but it is not a touch sensor connector for a bus system and it is not a complete switch mechanism.\u003c\/p\u003e\u003cp\u003eFor refit work on a boat, this suits owners who need to restore the look, symbol marking, or color of an existing control point without replacing the rest of the assembly. It is especially relevant where the electrical device behind the face is still serviceable and only the visible button set needs replacement.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eFour 1-module interchangeable half-button caps\u003c\/li\u003e\u003c\/ul\u003e","brand":"Vimar","offers":[{"title":"Grey \/ Neutral Symbol","offer_id":52371007733941,"sku":"QBP929098-0","price":21.34,"currency_code":"USD","in_stock":true},{"title":"White \/ Neutral Symbol","offer_id":52371007766709,"sku":"QBP929098-1","price":19.71,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Neutral Symbol","offer_id":52371007799477,"sku":"QBP929098-3","price":24.23,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Arrow Symbol","offer_id":52371007832245,"sku":"QBP929098-2","price":19.71,"currency_code":"USD","in_stock":false},{"title":"White \/ Arrow Symbol","offer_id":52371007865013,"sku":"QBP929098-5","price":19.71,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Arrow Symbol","offer_id":52371007897781,"sku":"QBP929098-8","price":24.23,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1316624_qbp929098.jpg?v=1774057652"},{"product_id":"qbp927057","title":"Vimar E27 Porcelain Lampholder, 43 mm, White Body","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar E27 Porcelain Lampholder is a ceramic E27 bulb holder for replacement work and new light assemblies where a standard Edison screw lamp base is required. The body measures 43 mm in diameter and mounts by screw fixing, with a 3\/8 inch nipple thread.\u003c\/p\u003e\u003cp\u003eThis range uses a cylindrical white porcelain body and comes in three mounting layouts. That gives you a direct-fix option for a flat mounting surface, a straight bracket version where fixing slots help with alignment, and a 90° insulated bracket version where the socket needs a different mounting angle inside the fitting.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eE27 Edison lampholder for standard E27 bulbs\u003c\/li\u003e\n\u003cli\u003e43 mm cylindrical ceramic body in white\u003c\/li\u003e\n\u003cli\u003eScrew-mount format with 3\/8 inch nipple thread\u003c\/li\u003e\n\u003cli\u003eThree fixing layouts to match different lamp housings and rebuilds\u003c\/li\u003e\n\u003cli\u003eCE and ENEC marked\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis lampholder is offered in multiple configurations built around the same 43 mm ceramic E27 body.\u003c\/p\u003e\u003cp\u003eWhat changes between the versions is the fixing style and hole pattern. The socket format, material, colour, and screw-mount construction stay the same across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM02174: direct-fix body with ø 4 mm fixing holes and 18 mm fixing centres. This suits fixtures where the lampholder mounts straight to the base without an added bracket.\u003c\/li\u003e\n\u003cli\u003eVM02174.D: straight fixing bracket with 4.5 x 6 mm fixing slots and 53 mm fixing centres. The slotted bracket gives a little more freedom when lining up an existing mounting plate.\u003c\/li\u003e\n\u003cli\u003eVM02174.S: 90° insulated fixing bracket with 4.5 x 9 mm fixing holes. This changes the mounting angle, which helps when the socket needs to sit off the main fixing surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eStart by confirming the bulb base on your fixture, since this holder is for E27 lamps only. Then compare the fixing pattern on the existing light with the version you are replacing, especially if the old holder uses a bracket or sits at a right angle inside the housing.\u003c\/p\u003e\u003cp\u003eThe 43 mm body size matters in enclosed lights, so it is worth checking clearance around the socket and the lamp itself before ordering. The 3\/8 inch nipple thread also matters if the holder is being installed through a shade ring, bracket, or threaded fitting on the light body.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for refit and repair jobs on cabin lights, utility lights, and portable lamps that already use an E27 socket. It also suits installers who need to keep the original mounting style of the fixture instead of changing the whole light assembly.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"18 mm","offer_id":52371008716981,"sku":"QBP927057-0","price":6.74,"currency_code":"USD","in_stock":false},{"title":"4.5x6 mm","offer_id":52371008749749,"sku":"QBP927057-9","price":5.45,"currency_code":"USD","in_stock":false},{"title":"4.5x9 mm","offer_id":52371008782517,"sku":"QBP927057-4","price":5.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1316529_qbp927057.jpg?v=1774057699"},{"product_id":"qbp927268","title":"Vimar E27 Lampholder, Partially Threaded Skirt, Glass-Reinforced Polyester Resin","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar 02104 E27 lampholder is a four-variant range of Edison lamp holders for portable lighting assemblies and replacement work where the entry style and finish need to match the existing fitting. Across the range, the holder format stays E27 and the body is made from glass-reinforced polyester resin.\u003c\/p\u003e\u003cp\u003eThe main differences are the mechanical entry and the finish. Two versions use an M10x1 nipple with a locking screw and a partially threaded skirt with casing lock, while the other two use a dome with shaped threaded entry and a partially threaded skirt with shade-holder seat. Black and white versions are available in both entry styles.\u003c\/p\u003e\u003cp\u003eThis is the kind of part to check when replacing a worn holder in a cabin lamp, berth light, or other onboard fixture where the lamp base is E27 but the mounting detail has to line up with the existing hardware.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eE27 Edison lampholder format for fixtures built around a standard E27 holder\u003c\/li\u003e\n\u003cli\u003eGlass-reinforced polyester resin body\u003c\/li\u003e\n\u003cli\u003eAvailable with an M10x1 nipple and locking screw or with a dome and shaped threaded entry\u003c\/li\u003e\n\u003cli\u003eBlack and white finishes across the range\u003c\/li\u003e\n\u003cli\u003ePartially threaded skirt arranged either for casing lock or for a shade-holder seat, depending on variant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range is offered in four configurations.\u003c\/p\u003e\u003cp\u003eWhat changes between variants is the body color and the entry style. The E27 holder format and the glass-reinforced polyester resin construction remain the same across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM02104: Black finish with M10x1 nipple and locking screw. This version suits fittings built around a threaded nipple connection.\u003c\/li\u003e\n\u003cli\u003eVM02104.S.B: White finish with dome and shaped threaded entry. It matches dome-style fittings in a white finish.\u003c\/li\u003e\n\u003cli\u003eVM02104.S: Black finish with dome and shaped threaded entry. This version uses the dome-style arrangement with a shade-holder seat.\u003c\/li\u003e\n\u003cli\u003eVM02104.B: White finish with M10x1 nipple and locking screw. It keeps the threaded nipple connection in a white finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCheck three points before ordering: the fixture must use an E27 lampholder, the entry style must match your existing hardware, and the visible finish should suit the light fitting. For nipple-mounted setups, confirm an M10x1 threaded connection with locking screw. For dome-style setups, confirm the shaped threaded entry and shade arrangement already used by the fixture.\u003c\/p\u003e\u003cp\u003eBecause the mounting details differ between the M10x1 and dome versions, matching the existing lampholder is more important than matching the lamp alone. That is usually the difference between a straight replacement and a fitting that needs extra parts or rework.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eOn boats, this type of part makes sense in interior lights and service lamps where an older E27 holder has cracked, discolored, or loosened at the entry point. It is a practical match for owners or yards repairing one fitting at a time and trying to keep the original mounting style.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Black \/ M10","offer_id":52371008815285,"sku":"QBP927268-3","price":4.32,"currency_code":"USD","in_stock":false},{"title":"White \/ M10","offer_id":52371008848053,"sku":"QBP927268-2","price":4.04,"currency_code":"USD","in_stock":false},{"title":"Black \/ Dome","offer_id":52371008880821,"sku":"QBP927268-7","price":3.91,"currency_code":"USD","in_stock":false},{"title":"White \/ Dome","offer_id":52371008913589,"sku":"QBP927268-8","price":4.47,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1317407_qbp927268.jpg?v=1774057702"},{"product_id":"qbp927454","title":"Vimar Plana Interchangeable RF Switch Buttons, for EnOcean, Bluetooth, ZigBee RF Devices, IP40, Halogen-Free Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Plana Series is a range of interchangeable RF switch buttons for compatible Vimar radiofrequency controls. These buttons are used with Plana EnOcean, Bluetooth, and ZigBee RF devices and come in either a pair of 1-module buttons or a single 2-module button. The range uses halogen-free thermoplastic with a glossy surface and is rated IP40, so it belongs in protected interior spaces rather than exposed exterior panels.\u003c\/p\u003e\u003cp\u003eThis is a finishing and replacement part, not the RF device itself. On a boat, it suits cabin lighting controls, interior scene switches, and enclosed helm panels where you need the button format and color to match an existing Plana installation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for compatible Vimar Plana RF controls in EnOcean, Bluetooth, and ZigBee systems\u003c\/li\u003e\n\u003cli\u003eAvailable as two separate 1-module buttons or one 2-module button, depending on the switch face already fitted\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with glossy surface\u003c\/li\u003e\n\u003cli\u003eIP40 rating for protected interior installations\u003c\/li\u003e\n\u003cli\u003eWhite and silver finish options for matching existing Plana trim\u003c\/li\u003e\n\u003cli\u003eReplacement button set only, not the RF switch electronics\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range is offered in four configurations that change the finish and the button layout.\u003c\/p\u003e\u003cp\u003eThe variable points are color and module format. The 1-module versions are supplied as two separate buttons, while the 2-module versions use one full-width button. Across the range, the function stays the same: interchangeable buttons for compatible Plana RF controls.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM14506.SL: Silver finish, 1-module button set with 2 units. This version gives you two separate buttons for a layout that uses two 1-module buttons and carries the lacquered silver surface.\u003c\/li\u003e\n\u003cli\u003eVM14506: White finish, 1-module button set with 2 units. This version gives you two separate buttons for a layout that uses two 1-module buttons.\u003c\/li\u003e\n\u003cli\u003eVM14506.2.SL: Silver finish, 2-module button. This is the single-piece option for assemblies that use one 2-module control face and it carries the lacquered silver surface.\u003c\/li\u003e\n\u003cli\u003eVM14506.2: White finish, 2-module button. This is the single-piece option for assemblies that use one 2-module control face.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCheck the existing switch face before ordering. Installations built around two separate 1-module buttons need the pair format, while installations built around one full-width control face need the 2-module format. These buttons complete compatible Plana RF switch hardware and do not replace the radio transmitter, frame, or cover plate.\u003c\/p\u003e\u003cp\u003eIP40 construction makes these buttons a fit for dry interior areas such as the cabin, saloon, berth spaces, or an enclosed console. They are not meant for open deck locations, washdown zones, or any position that takes direct spray.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis product fits boats that already use Vimar Plana smart switching and need a replacement button set or a finish change without changing the underlying control hardware. It is a straightforward match for refits where the electronics stay in place and the visible button layout or color needs to match the rest of the panel.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Silver \/ 1 Module (2 Units)","offer_id":52371009077429,"sku":"QBP927454-2","price":4.58,"currency_code":"USD","in_stock":false},{"title":"White \/ 1 Module (2 Units)","offer_id":52371009110197,"sku":"QBP927454-6","price":3.86,"currency_code":"USD","in_stock":false},{"title":"Silver \/ 2 Modules","offer_id":52371009142965,"sku":"QBP927454-8","price":4.23,"currency_code":"USD","in_stock":false},{"title":"White \/ 2 Modules","offer_id":52371009175733,"sku":"QBP927454-0","price":3.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1316532_qbp927454.jpg?v=1774057712"},{"product_id":"qbp287384","title":"Vimar Eikon Interchangeable 1-Module Button, Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20531 is a family of interchangeable 1-module buttons for compatible Eikon simple push-button and rocker push-button positions. The front piece measures about 44 mm high by 22.2 mm wide with about 5.7 mm face depth, so it is meant to match existing Eikon hardware rather than replace the whole mechanism.\u003c\/p\u003e\u003cp\u003eThis range is made from thermoplastic with a matt surface, and the visible finish changes by version. Grey and white versions use an untreated matt face, while silver versions use a lacquered matt face.\u003c\/p\u003e\u003cp\u003eOn board, this is the kind of spare part used when a vessel already has Vimar Eikon switching at the helm, in the cabin, or in service spaces and the panel needs a matching replacement after wear, relabeling, or refit work. The family includes plain fronts as well as versions with one name plate, two name plates, a customizable name plate, or a sun regulation symbol.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eInterchangeable 1-module button family for Vimar Eikon control points\u003c\/li\u003e\n\u003cli\u003eThis is the visible button front, not the complete electrical mechanism or cover plate\u003c\/li\u003e\n\u003cli\u003eFront size about 44 x 22.2 mm with about 5.7 mm face depth\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction with a matt surface across the range\u003c\/li\u003e\n\u003cli\u003eFinish options in this range include grey, white, and silver\u003c\/li\u003e\n\u003cli\u003eAvailable front styles include plain, one name plate, two name plates, customizable name plate, and sun regulation symbol versions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range varies by finish and by the marking style on the front. The listed versions are available in grey, white, and silver, with front options that include no symbol, one name plate, two name plates, one customizable name plate, and a sun regulation symbol.\u003c\/p\u003e\u003cp\u003eThose changes mainly affect how the switch point looks and how it is identified on the panel. Plain versions keep the face clean, name-plate versions leave room for circuit labels, and the sun regulation symbol version suits locations used for light adjustment or dimming control.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit depends on the existing Eikon assembly already installed on board. This family is intended for compatible 1-module Eikon button positions, and the front style needs to match the function behind the panel, especially where the location needs a plain face, a label window, or a symbol-marked front.\u003c\/p\u003e\u003cp\u003eThis part does not replace the mechanism, the mounting frame, or the cover plate. It suits boats that already use Vimar Eikon hardware and need the switch bank to stay visually consistent during maintenance or interior updates.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe catalog class for this family is a touch rocker for bus system hardware, but the button itself does not add control electronics. It is listed with no KNX, KNX-RF, radio-frequency, LON, or Powernet function in the front piece, so system behavior stays tied to the compatible mechanism installed behind it.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFor replacement work, the important checks are the Eikon series, the 1-module format, the finish already used on the panel, and the front marking needed at that switch location. That is usually the difference between a straight cosmetic swap and a button that does not match the panel legend.\u003c\/p\u003e\u003cp\u003eIt suits refits where the switching hardware is still in service and only the visible operating piece needs to be renewed or relabeled.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White \/ 1 Name Plate","offer_id":52371013370037,"sku":"QBP287384-V1","price":7.27,"currency_code":"USD","in_stock":true},{"title":"Silver \/ 1 Name Plate","offer_id":52371013402805,"sku":"QBP287384-V2","price":8.93,"currency_code":"USD","in_stock":true},{"title":"White \/ 2 Name Plate","offer_id":52371013435573,"sku":"QBP287384-V3","price":7.27,"currency_code":"USD","in_stock":true},{"title":"Silver \/ 2 Name Plate","offer_id":52371013468341,"sku":"QBP287384-V4","price":8.93,"currency_code":"USD","in_stock":true},{"title":"Grey \/ No Symbol","offer_id":52371013501109,"sku":"QBP287384-V5","price":7.87,"currency_code":"USD","in_stock":false},{"title":"Grey \/ 2 Name Plate","offer_id":52371013533877,"sku":"QBP287384-V6","price":7.27,"currency_code":"USD","in_stock":true},{"title":"Silver \/ No Symbol","offer_id":52371013566645,"sku":"QBP287384-V7","price":8.93,"currency_code":"USD","in_stock":true},{"title":"White \/ No Symbol","offer_id":52371013599413,"sku":"QBP287384-V8","price":7.27,"currency_code":"USD","in_stock":true},{"title":"Grey \/ 1 Name Plate","offer_id":52371013632181,"sku":"QBP287384-V9","price":7.27,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Sun Regulation Symbol","offer_id":52371013664949,"sku":"QBP287384-V10","price":8.93,"currency_code":"USD","in_stock":false},{"title":"Silver \/ 1 Customizable Name Plate","offer_id":52371013697717,"sku":"QBP287384-V11","price":8.93,"currency_code":"USD","in_stock":true},{"title":"White \/ 1 Customizable Name Plate","offer_id":52371013730485,"sku":"QBP287384-V12","price":7.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1319467_qbp287384.jpg?v=1774057818"},{"product_id":"qbp289328","title":"Vimar Plana Interchangeable 2-Module Button, Lightable, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Plana Series is a family of interchangeable 2-module buttons for Plana switch and push-button positions, with IP40 protection, a one-part rocker format, and a glossy halogen-free thermoplastic construction.\u003c\/p\u003e\u003cp\u003eFor boat interiors, this is the visible control piece that gives a panel a clean and readable finish while keeping the switch function easy to identify. It suits protected locations such as cabins, galleys, heads, companionway areas, and sheltered helm panels where the control face needs to match the rest of the Plana installation.\u003c\/p\u003e\u003cp\u003eThe range includes plain lightable fronts and versions marked for light, bell, key, O\/I, PRESS, dot, and customizable symbol use. That makes it easier to keep multi-function panels clear without mixing styles across the vessel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePlana 2-module interchangeable button format for switch and push-button control points\u003c\/li\u003e\n\u003cli\u003eOne-part rocker design with clamp mounting\u003c\/li\u003e\n\u003cli\u003eIP40 protection for protected interior mounting locations\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with a glossy surface finish\u003c\/li\u003e\n\u003cli\u003eAvailable across the range in white, silver, and antibacterial white depending on variant\u003c\/li\u003e\n\u003cli\u003eLightable and symbol-marked options available for clearer panel identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range varies mainly by front finish and symbol marking. Available finishes include white and silver, plus an antibacterial white version in the plain lightable format. Front markings across the family include simple, light symbol, bell symbol, key symbol, O\/I symbol, PRESS symbol, a lightable dot, and a customizable lightable symbol version.\u003c\/p\u003e\u003cp\u003eThe core format stays consistent as a 2-module interchangeable button within the Plana line. The main choice is the face style and legend that matches the circuit or control point on the panel. The O\/I versions are matched to the 14015.0 2P switch mechanism.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis product family is meant for Vimar Plana installations, so the first fit check is the series and the 2-module position on the device. It works as the front control element for domestic switching functions rather than as a standalone electrical mechanism.\u003c\/p\u003e\u003cp\u003eOn board, it is a good match for refits or new interior panels where you want consistent switch styling and a clear legend for lighting, access, service circuits, or bell functions. Because the rating is IP40, it is better suited to protected interior areas than to exposed deck locations or washdown zones.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe clamp-mounted rocker format keeps installation straightforward when replacing a worn button face or when matching a new control point to an existing Plana panel. For marine refit work, that helps when appearance and function both matter, especially on panels where several switches sit side by side.\u003c\/p\u003e\u003cp\u003eThe antibacterial white option makes practical sense in areas where hands are frequently wet or where hygiene matters more, such as heads and galley-adjacent panels. Symbol-marked versions also help crew and guests understand the control at a glance without relying on labels elsewhere on the panel.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White \/ Light Symbol","offer_id":52371015663797,"sku":"QBP289328-V1","price":4.37,"currency_code":"USD","in_stock":false},{"title":"White \/ Simple","offer_id":52371015696565,"sku":"QBP289328-V2","price":3.28,"currency_code":"USD","in_stock":false},{"title":"White \/ Key Symbol","offer_id":52371015729333,"sku":"QBP289328-V3","price":4.37,"currency_code":"USD","in_stock":false},{"title":"White \/ Bell Symbol","offer_id":52371015762101,"sku":"QBP289328-V4","price":4.37,"currency_code":"USD","in_stock":false},{"title":"Silver \/ O\/I Symbol","offer_id":52371015794869,"sku":"QBP289328-V5","price":5.61,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Simple","offer_id":52371015827637,"sku":"QBP289328-V6","price":4.04,"currency_code":"USD","in_stock":false},{"title":"White \/ O\/I Symbol","offer_id":52371015860405,"sku":"QBP289328-V7","price":4.37,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Key Symbol","offer_id":52371015893173,"sku":"QBP289328-V8","price":5.61,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Press Symbol","offer_id":52371015925941,"sku":"QBP289328-V9","price":4.18,"currency_code":"USD","in_stock":false},{"title":"Antibacterial White \/ Simple","offer_id":52371015958709,"sku":"QBP289328-V10","price":3.61,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Light Symbol","offer_id":52371015991477,"sku":"QBP289328-V11","price":5.61,"currency_code":"USD","in_stock":false},{"title":"White \/ Press Symbol","offer_id":52371016024245,"sku":"QBP289328-V12","price":3.99,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Bell Symbol","offer_id":52371016057013,"sku":"QBP289328-V13","price":5.61,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Customizable","offer_id":52371016089781,"sku":"QBP289328-V14","price":5.09,"currency_code":"USD","in_stock":false},{"title":"White \/ Lightable","offer_id":52371016122549,"sku":"QBP289328-V15","price":3.75,"currency_code":"USD","in_stock":false},{"title":"White \/ Lightable Dot","offer_id":52371016155317,"sku":"QBP289328-V16","price":3.28,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1317511_qbp289328.webp?v=1774057872"},{"product_id":"qbp446631","title":"Vimar Eikon Interchangeable 2-Module Button, Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20532 series is a range of interchangeable 2-module buttons for Eikon control points. These thermoplastic front buttons sit on the visible side of the installation and are offered with different symbols, colors, and button styles to match the function of the switch position behind them.\u003c\/p\u003e\u003cp\u003eThis range covers both rocker push-button and simple push-button layouts, depending on the version selected. It is the front button only, not the complete mechanism, so it is mainly used when replacing a worn part, matching the marking on an existing control, or keeping the finish consistent across a panel.\u003c\/p\u003e\u003cp\u003eOn board, this type of part makes the most sense in protected interior areas such as a cabin, saloon, or enclosed helm console where Vimar Eikon hardware is already installed. It is a practical fit when the goal is to refresh the face of an existing switch point without changing the whole assembly.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eInterchangeable 2-module front button for the Vimar Eikon range\u003c\/li\u003e\n\u003cli\u003eAvailable across the range in grey, white, and silver\/Next finishes\u003c\/li\u003e\n\u003cli\u003eSymbol options in the range include arrows, ON\/OFF, regulation markings, name-plate versions, and plain versions without a symbol\u003c\/li\u003e\n\u003cli\u003eSome versions are made for rocker push buttons, while others are made for simple push buttons\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction with a matt surface finish\u003c\/li\u003e\n\u003cli\u003eUseful for replacing a marked or worn button while keeping the existing Eikon installation in place\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range varies mainly by finish and front marking. Depending on the version, the button face is available in grey, white, or silver\/Next, with symbol options that cover directional arrows, ON\/OFF markings, regulation-style markings, name-plate versions, or a plain face without a symbol.\u003c\/p\u003e\u003cp\u003eThe range also includes versions for different button actions. Some are intended for rocker push buttons, while plain and name-plate versions are used with simple push buttons. Before ordering, the visible symbol and finish should be matched to the existing panel, and the button style should be matched to the mechanism already installed behind the cover plate.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThese buttons are part of the Eikon family, so they should be matched to an existing Eikon installation rather than treated as a universal switch part. The 2-module format is fixed across the range, but the front symbol and the type of push action must line up with the insert already on the wall or panel.\u003c\/p\u003e\u003cp\u003eBecause this is only the front button, electrical rating, control method, and any network or system compatibility come from the installed mechanism behind it, not from the button itself. That matters on boats where the same panel may be tied into lighting, automation, or auxiliary switching through different inserts.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eReplacement is straightforward when you are working within an existing Eikon setup and already know the correct button style. The main check is whether the location uses a rocker push button or a simple push button, then matching the face marking to the function shown on the panel.\u003c\/p\u003e\u003cp\u003eThis is a sensible choice for boat owners, refitters, and marine electricians who are cleaning up an interior switch bank, standardizing labels, or replacing a damaged front button without rebuilding the whole control point.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey \/ Arrows Symbol","offer_id":52371042533557,"sku":"QBP446631-V1","price":8.48,"currency_code":"USD","in_stock":false},{"title":"White \/ Arrows Symbol","offer_id":52371042566325,"sku":"QBP446631-V2","price":8.48,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Arrows Symbol","offer_id":52371042599093,"sku":"QBP446631-V3","price":10.54,"currency_code":"USD","in_stock":false},{"title":"Silver \/ ON\/OFF Symbols","offer_id":52371042631861,"sku":"QBP446631-V4","price":10.54,"currency_code":"USD","in_stock":false},{"title":"Grey \/ ON\/OFF Symbols","offer_id":52371042664629,"sku":"QBP446631-V5","price":8.48,"currency_code":"USD","in_stock":false},{"title":"White \/ ON\/OFF Symbols","offer_id":52371042697397,"sku":"QBP446631-V6","price":8.48,"currency_code":"USD","in_stock":false},{"title":"White \/ Regulation Symbol","offer_id":52371042730165,"sku":"QBP446631-V7","price":7.84,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Sun Regulation Symbol","offer_id":52371042762933,"sku":"QBP446631-V8","price":7.84,"currency_code":"USD","in_stock":false},{"title":"White \/ Sun Regulation Symbol","offer_id":52371042795701,"sku":"QBP446631-V9","price":7.84,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Sun Regulation Symbol","offer_id":52371042828469,"sku":"QBP446631-V10","price":9.74,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Simple","offer_id":52371042861237,"sku":"QBP446631-V11","price":7.84,"currency_code":"USD","in_stock":false},{"title":"White \/ Simple","offer_id":52371042894005,"sku":"QBP446631-V12","price":7.84,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Simple","offer_id":52371042926773,"sku":"QBP446631-V13","price":9.74,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Name-Plate","offer_id":52371042959541,"sku":"QBP446631-V14","price":7.84,"currency_code":"USD","in_stock":false},{"title":"White \/ Name-Plate","offer_id":52371042992309,"sku":"QBP446631-V15","price":7.84,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Name-Plate","offer_id":52371043025077,"sku":"QBP446631-V16","price":9.74,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Without Symbol","offer_id":52371043057845,"sku":"QBP446631-V17","price":9.74,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1317815_qbp446631.jpg?v=1774058154"},{"product_id":"qbp469148","title":"Vimar EIKON Spare 1-Module Interchangeable Button, Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar EIKON Series is a range of 1-module interchangeable replacement buttons for existing EIKON controls, with versions for rocker buttons and simple push buttons in grey, white, and silver. The button fronts are thermoplastic with a matt surface, and the range covers plain faces, printed symbols, and customizable versions.\u003c\/p\u003e\u003cp\u003eOn board, this is the visible control face you change when the underlying EIKON mechanism is staying in place but the panel needs the right legend, a fresh finish, or a matching replacement after wear. It suits helm, cabin, and service panels where clear labeling matters and where the rest of the EIKON system is already installed.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module interchangeable button format for the Vimar EIKON range\u003c\/li\u003e\n\u003cli\u003eVersions available for both rocker-button and simple push button mechanisms\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction with a matt surface across the family\u003c\/li\u003e\n\u003cli\u003eFinish choices include grey, white, and silver\u003c\/li\u003e\n\u003cli\u003eLegend options in this range include plain, ON\/OFF, direction arrows, track and function change, O\/I with volume control, and customizable fronts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range varies by finish and by the legend or face style shown on the front of the button. Options shown here include simple, ON\/OFF, direction arrows, track and function change, O\/I with volume control, light up and down style control, and customizable fronts, with color choices in grey, white, and silver.\u003c\/p\u003e\u003cp\u003eThe other important difference is the underlying button style. Some variants are made for rocker-button mechanisms and others are made for simple push button mechanisms, so fit depends on matching the installed EIKON device rather than matching the symbol alone. Across the range, the format stays 1 module with thermoplastic button fronts and a matt finish.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, check the control already fitted on the boat and confirm whether it takes a rocker button or a simple push button front. Then match the legend to the function at that position, such as ON\/OFF for switching, arrows for directional control, or track and function change for media control panels.\u003c\/p\u003e\u003cp\u003eThis range makes sense when you want the panel to stay consistent without replacing the full control device. It works well during refits and cosmetic updates where the original EIKON hardware remains in service and only the visible button front needs to change.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThese are spare interchangeable button fronts, not complete switches or actuators. The main job is identifying the exact EIKON mechanism behind the plate, then choosing the finish and symbol that match the function already assigned to that circuit or control point.\u003c\/p\u003e\u003cp\u003eThat approach keeps the panel layout familiar for crew and guests, which matters on a boat where lighting, audio, and other onboard controls are often used by touch and quick recognition rather than by reading a label.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White \/ Track \u0026 Function Change","offer_id":52371055050933,"sku":"QBP469148-V1","price":8.79,"currency_code":"USD","in_stock":false},{"title":"Silver \/ O\/I \u0026 Volume Control","offer_id":52371055083701,"sku":"QBP469148-V2","price":10.93,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Track \u0026 Function Change","offer_id":52371055116469,"sku":"QBP469148-V3","price":8.79,"currency_code":"USD","in_stock":false},{"title":"Grey \/ O\/I \u0026 Volume Control","offer_id":52371055149237,"sku":"QBP469148-V4","price":8.79,"currency_code":"USD","in_stock":false},{"title":"White \/ ON\/OFF","offer_id":52371055182005,"sku":"QBP469148-V5","price":8.79,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Track \u0026 Function Change","offer_id":52371055214773,"sku":"QBP469148-V6","price":10.93,"currency_code":"USD","in_stock":false},{"title":"Silver \/ ON\/OFF","offer_id":52371055247541,"sku":"QBP469148-V7","price":10.93,"currency_code":"USD","in_stock":false},{"title":"White \/ Simple","offer_id":52371055280309,"sku":"QBP469148-V8","price":8.79,"currency_code":"USD","in_stock":false},{"title":"White \/ Direction Arrows","offer_id":52371055313077,"sku":"QBP469148-V9","price":8.79,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Direction Arrows","offer_id":52371055345845,"sku":"QBP469148-V10","price":10.93,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Simple","offer_id":52371055378613,"sku":"QBP469148-V11","price":8.79,"currency_code":"USD","in_stock":false},{"title":"Grey \/ 2-Customizable Module","offer_id":52371055411381,"sku":"QBP469148-V12","price":8.79,"currency_code":"USD","in_stock":false},{"title":"Silver \/ 2-Customizable Module","offer_id":52371055444149,"sku":"QBP469148-V13","price":10.93,"currency_code":"USD","in_stock":false},{"title":"White \/ 2-Customizable Module","offer_id":52371055476917,"sku":"QBP469148-V14","price":8.79,"currency_code":"USD","in_stock":false},{"title":"Grey \/ 1-Customizable Module","offer_id":52371055509685,"sku":"QBP469148-V15","price":8.79,"currency_code":"USD","in_stock":false},{"title":"White \/ O\/I \u0026 Volume Control","offer_id":52371055542453,"sku":"QBP469148-V16","price":8.79,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Direction Arrows","offer_id":52371055575221,"sku":"QBP469148-V17","price":9.51,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Simple","offer_id":52371055607989,"sku":"QBP469148-V18","price":10.93,"currency_code":"USD","in_stock":false},{"title":"Grey \/ ON\/OFF","offer_id":52371055640757,"sku":"QBP469148-V19","price":8.79,"currency_code":"USD","in_stock":false},{"title":"White \/ Light Up \u0026 Down","offer_id":52371055673525,"sku":"QBP469148-V20","price":8.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1318744_qbp469148.webp?v=1774058385"},{"product_id":"qbp500884","title":"Vimar ARKÉ 1-Module Interchangeable Lightable Button, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar ARKÉ Series 1 Module Interchangeable Lightable Button is a 1-module rocker-style front button that completes a compatible Arké switch or push-button mechanism and gives you a clear control point on board.\u003c\/p\u003e\u003cp\u003eIt is lightable and includes a monitoring window\/light outlet, so it can be illuminated when paired with a lightable mechanism or indicator. The face is 44.2 mm high by 22 mm wide with about 6.7 mm depth, and it is rated IP40 for use in protected interior panels.\u003c\/p\u003e\u003cp\u003eOn boats that already use Vimar Arké modules at the helm, nav station, cabin, or galley, this is a practical way to refresh a worn button, update the symbol, or match panel finishes without rewiring the circuit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module interchangeable button for Vimar ARKÉ wiring devices, used as the external control element on a compatible switch or push-button mechanism\u003c\/li\u003e\n\u003cli\u003eLight outlet window supports illuminated operation when the paired mechanism uses an indicator lamp or LED\u003c\/li\u003e\n\u003cli\u003eIP40 protection for dry, sheltered mounting locations such as cabin switch panels and enclosed helm consoles\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with a matt surface finish\u003c\/li\u003e\n\u003cli\u003eApproximate size 22 mm x 44.2 mm with 6.7 mm depth to match standard 1-module Arké layouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis button is offered with different front finishes and symbol styles. Finish options include grey (similar RAL 7015), white (similar RAL 9016), and Metal in an aluminium tone (similar RAL 9007).\u003c\/p\u003e\u003cp\u003eSymbol options include a plain version with no icon plus labeled versions such as bell, key, light, PRESS, and O\/I. Some versions are listed as lightable without a printed symbol. The symbol is part of the button and is not intended to be swapped separately.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eIt is sized for Vimar ARKÉ 1-module positions and is intended to be used with a matching Arké frame and cover plate. This is a control cover, not a complete electrical switch, so the electrical rating and circuit type depend on the mechanism installed behind it.\u003c\/p\u003e\u003cp\u003eBecause IP40 is a light-duty protection level, it belongs in areas protected from spray and washdowns. For open cockpits or exposed deck locations, use sealed switching equipment rather than an interior wall-type button.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eIsolate power to the circuit, remove the plate, and release the existing 1-module button from the mechanism. Fit the new button so the light outlet aligns with the indicator point on the mechanism, then reinstall the plate and verify the rocker travel is free and returns cleanly.\u003c\/p\u003e\u003cp\u003eIf you are using illumination, confirm the mechanism is the lightable type and that the indicator lamp or LED is installed and oriented correctly before closing the panel.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of labeled, lightable button suits cabin lighting, courtesy lighting, service circuits, and call or bell functions where the marking needs to stay readable at night. It is a good match for refits where the boat already has Vimar Arké modules and panel consistency matters more than changing the underlying hardware.\u003c\/p\u003e\u003ch6\u003eCare and cleaning\u003c\/h6\u003e\u003cp\u003eWipe with a soft cloth and mild soap solution. Avoid solvents and abrasive pads that can mark the matt surface and cloud the light window.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White \/ Light Symbol","offer_id":52371066126517,"sku":"QBP500884-V1","price":3.39,"currency_code":"USD","in_stock":false},{"title":"Metal \/ Light Symbol","offer_id":52371066159285,"sku":"QBP500884-V2","price":4.47,"currency_code":"USD","in_stock":false},{"title":"Metal \/ Press Symbol","offer_id":52371066192053,"sku":"QBP500884-V3","price":5.27,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Press Symbol","offer_id":52371066224821,"sku":"QBP500884-V4","price":3.9,"currency_code":"USD","in_stock":false},{"title":"White \/ Simple","offer_id":52371066257589,"sku":"QBP500884-V5","price":2.38,"currency_code":"USD","in_stock":false},{"title":"Metal \/ Bell Symbol","offer_id":52371066290357,"sku":"QBP500884-V6","price":4.47,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Bell Symbol","offer_id":52371066323125,"sku":"QBP500884-V7","price":3.14,"currency_code":"USD","in_stock":false},{"title":"Metal \/ Key Symbol","offer_id":52371066355893,"sku":"QBP500884-V8","price":4.47,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Simple","offer_id":52371066388661,"sku":"QBP500884-V9","price":2.38,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Light Symbol","offer_id":52371066421429,"sku":"QBP500884-V10","price":3.39,"currency_code":"USD","in_stock":true},{"title":"Grey \/ Key Symbol","offer_id":52371066454197,"sku":"QBP500884-V11","price":3.14,"currency_code":"USD","in_stock":false},{"title":"White \/ Bell Symbol","offer_id":52371066486965,"sku":"QBP500884-V12","price":3.14,"currency_code":"USD","in_stock":false},{"title":"Metal \/ Simple","offer_id":52371066519733,"sku":"QBP500884-V13","price":3.75,"currency_code":"USD","in_stock":false},{"title":"White \/ Key Symbol","offer_id":52371066552501,"sku":"QBP500884-V14","price":3.14,"currency_code":"USD","in_stock":false},{"title":"White \/ Press Symbol","offer_id":52371066585269,"sku":"QBP500884-V15","price":3.9,"currency_code":"USD","in_stock":false},{"title":"White \/ O\/I Symbol","offer_id":52371066618037,"sku":"QBP500884-V16","price":3.14,"currency_code":"USD","in_stock":true},{"title":"Grey \/ O\/I Symbol","offer_id":52371066650805,"sku":"QBP500884-V17","price":3.39,"currency_code":"USD","in_stock":false},{"title":"Metal \/ O\/I Symbol","offer_id":52371066683573,"sku":"QBP500884-V18","price":4.47,"currency_code":"USD","in_stock":true},{"title":"Grey \/ Lightable","offer_id":52371066716341,"sku":"QBP500884-V19","price":2.38,"currency_code":"USD","in_stock":false},{"title":"White \/ Lightable","offer_id":52371066749109,"sku":"QBP500884-V20","price":2.38,"currency_code":"USD","in_stock":false},{"title":"Metal \/ Lightable","offer_id":52371066781877,"sku":"QBP500884-V21","price":3.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1318460_qbp500884.png?v=1774058624"},{"product_id":"qbp193021","title":"Vimar Eikon Interchangeable RF Switch Buttons, For EnOcean Bluetooth ZigBee Devices, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20506 is an interchangeable button set used to complete compatible Eikon RF switch devices. It works with compatible EnOcean, Bluetooth, and ZigBee radiofrequency devices and comes in 1-module and 2-module versions, with grey, silver, and white finish options. The buttons are made from halogen-free thermoplastic with a matt surface and an IP40 rating.\u003c\/p\u003e\u003cp\u003eThis is the front button and control element, not the radio device itself. On board, it makes sense in protected interior locations such as cabin switch panels, enclosed helm areas, and other dry spaces where you want the control point to match the rest of the Eikon installation. The face is plain, with no imprint, no label area, and no interchangeable lens or symbol.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eInterchangeable Eikon button set for compatible EnOcean, Bluetooth, and ZigBee RF switch devices\u003c\/li\u003e\n\u003cli\u003eAvailable in both 1-module and 2-module formats to match the device layout behind the plate\u003c\/li\u003e\n\u003cli\u003eGrey, silver, and white matt finishes for matching nearby Eikon controls and trim\u003c\/li\u003e\n\u003cli\u003eMade from halogen-free thermoplastic\u003c\/li\u003e\n\u003cli\u003eIP40-rated for protected interior installations\u003c\/li\u003e\n\u003cli\u003ePlain unmarked face with no label area and no exchangeable lens or symbol\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range varies by finish and module count. The finish options are grey, silver, and white, and each finish is offered in both 1-module and 2-module versions.\u003c\/p\u003e\u003cp\u003eAcross the range, the product remains an interchangeable RF switch button in the Eikon family with the same plain look, matt surface, halogen-free thermoplastic construction, and IP40 protection rating. The 1-module versions are supplied as 2-piece buttons, while the 2-module versions use a one-part 2-module button.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCheck the module size of the compatible RF device before ordering. The 1-module versions fit single-module layouts, and the 2-module versions fit two-module layouts. This part is selected mainly by finish and module count, so it is useful when replacing a worn button, matching a refit, or keeping a helm or cabin switch bank visually consistent.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eFor marine interiors, this part is best suited to sheltered positions where direct spray and washdowns are not expected. It is a practical match for owners and installers who already have a compatible Vimar RF device in place and need the correct front button in the right color and module format for the surrounding panel work.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey \/ 1 Module","offer_id":52371090145461,"sku":"QBP193021-V8","price":5.5,"currency_code":"USD","in_stock":false},{"title":"Silver \/ 1 Module","offer_id":52371090178229,"sku":"QBP193021-V9","price":8.18,"currency_code":"USD","in_stock":false},{"title":"White \/ 1 Module","offer_id":52371090210997,"sku":"QBP193021-V6","price":5.5,"currency_code":"USD","in_stock":false},{"title":"Grey \/ 2 Module","offer_id":52371090243765,"sku":"QBP193021-V3","price":5.5,"currency_code":"USD","in_stock":false},{"title":"Silver \/ 2 Module","offer_id":52371090276533,"sku":"QBP193021-V7","price":8.18,"currency_code":"USD","in_stock":false},{"title":"White \/ 2 Module","offer_id":52371090309301,"sku":"QBP193021-V2","price":5.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1314042_qbp193021.jpg?v=1774059279"},{"product_id":"qbp193852","title":"Vimar Eikon 2 Half Rocker Buttons, KNX, 1 Module, Arrow Symbols","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20751.2 is a 1-module set of two interchangeable half-buttons with directional arrow symbols for compatible bus-system controls in the Eikon range. It is the visible operating piece for a split rocker interface, with an overall front size of about 22.3 x 44.4 mm and a profile depth of about 5.7 mm.\u003c\/p\u003e\u003cp\u003eThis part is classified as a KNX touch rocker for bus systems and is used where the control point needs clear up and down or open and close button marking. On board, it makes sense in interior switch panels where you are replacing a worn button face or matching an existing Eikon installation during a refit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo interchangeable half-buttons with directional arrow symbols in a 1-module format\u003c\/li\u003e\n\u003cli\u003eClassified as a KNX touch rocker for bus system applications\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction with a matt surface finish\u003c\/li\u003e\n\u003cli\u003eFront dimensions of about 22.3 x 44.4 mm with a depth of about 5.7 mm\u003c\/li\u003e\n\u003cli\u003eAvailable in grey, silver, and white to match different Eikon panel finishes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in three colour configurations within the same Eikon 1-module arrow-symbol half-button format.\u003c\/p\u003e\u003cp\u003eWhat changes between variants is the colour and surface treatment. The two-piece layout, directional arrow symbols, KNX touch-rocker classification, thermoplastic body, matt finish, and 1-module size stay the same across the range, while the silver version uses a lacquered surface and the grey and white versions are untreated.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20751.2.B - Color White. Matt white finish in thermoplastic with a RAL-similar 9016 appearance, giving a light, clean look on matching Eikon control points.\u003c\/li\u003e\n\u003cli\u003eVM20751.2.N - Color Silver. Matt silver finish with lacquered surface protection and a RAL-similar 9022 appearance, giving a more metallic look alongside silver-toned trim.\u003c\/li\u003e\n\u003cli\u003eVM20751.2 - Color Grey. Matt grey finish in thermoplastic with a RAL-similar 7024 appearance, keeping the control face understated on darker panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCheck that the existing control point uses the Vimar Eikon 1-module format and the split half-button layout. This item is the arrow-marked front operating piece, so fit depends on the compatible underlying bus-system control already installed in the panel.\u003c\/p\u003e\u003cp\u003eThe arrow symbols make it suitable for functions that rely on directional input, where the user benefits from a clear visual cue at the switch face. It suits replacement work on yachts and other craft that already use Vimar Eikon interiors and want the finish and button style to stay consistent across the cabin or saloon.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":52371090538677,"sku":"QBP193852-V0","price":10.69,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":52371090571445,"sku":"QBP193852-V7","price":12.35,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":52371090604213,"sku":"QBP193852-V8","price":11.57,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1314640_qbp193852.jpg?v=1774059286"},{"product_id":"qbp591254","title":"Vimar Plana 1M Interchangeable Button, Single Rocker, IP40, Lightable, Halogen-Free Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Plana Series is a 1-module interchangeable button used on compatible Plana modular controls to give the switch face a clean look and a clear function label. It is a practical replacement part when a rocker has been scuffed, the symbol needs to change, or you want a consistent legend across a boat’s switch panel.\u003c\/p\u003e\u003cp\u003eThe front piece is made from halogen-free thermoplastic with a glossy surface, and it carries an IP40 protection rating for protected interior locations such as a cabin panel, chart table, or inside a console. A small monitoring window\/light outlet is built into the button so it can align with mechanisms that use an indicator or locator light behind the face.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module interchangeable button for Vimar Plana modular plates and mechanisms\u003c\/li\u003e\n\u003cli\u003eFinish options include glossy white (RAL 9003) and silver, depending on configuration\u003c\/li\u003e\n\u003cli\u003eSymbol options cover common onboard functions, including simple (no symbol), bell, key, light, O\/I, press, and other markings by variant\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic construction for cleaner material behavior in enclosed spaces\u003c\/li\u003e\n\u003cli\u003eIP40 rating suited to dry, protected panels; not intended for exposed spray or washdown areas\u003c\/li\u003e\n\u003cli\u003eMonitoring window\/light outlet for use with indicator or locator light mechanisms behind the button\u003c\/li\u003e\n\u003cli\u003eHelpful for re-labeling circuits when refitting a helm switch bank or updating cabin controls\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis item is offered in multiple configurations. The differences across the range are the front finish (white or silver) and the printed symbol or marking on the button face.\u003c\/p\u003e\u003cp\u003eSome versions are plain with no symbol, while others carry a specific icon to match the circuit function. This makes it easier to keep a consistent look across adjacent modules while still giving each switch a clear, glanceable label.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a Plana Series 1-module button, intended to be used with the matching Plana 1M modular mechanism and support hardware already installed in the plate. It is the front actuator piece, not the electrical switching mechanism.\u003c\/p\u003e\u003cp\u003eIf you are replacing an existing button, match the module size (1M) and choose the finish and symbol that matches the rest of the plate and the function you want shown on the panel.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eIsolate power to the circuit at the breaker panel before working on any switchgear. Remove the existing button from the mechanism, then fit the replacement button so the symbol orientation reads correctly when installed.\u003c\/p\u003e\u003cp\u003eIf your mechanism uses an indicator or locator light, confirm the monitoring window\/light outlet lines up cleanly and is not blocked by the plate or adjacent modules.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis button suits interior and protected helm locations where you want tidy labeling for lighting, signaling, or accessory circuits without adding external label tape. It is a good match for refits where the underlying mechanisms are staying in place and only the visible button faces need to be standardized.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe with a soft cloth and mild soap solution. Avoid solvent cleaners that can haze glossy thermoplastic surfaces, and re-check the fit after heavy vibration or temperature swings common on boats.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Silver \/ Key Symbol","offer_id":52371101843637,"sku":"QBP591254-V1","price":3.71,"currency_code":"USD","in_stock":false},{"title":"White \/ Simple","offer_id":52371101876405,"sku":"QBP591254-V2","price":1.9,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Simple","offer_id":52371101909173,"sku":"QBP591254-V3","price":3.5,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Light Symbol","offer_id":52371101941941,"sku":"QBP591254-V4","price":4.01,"currency_code":"USD","in_stock":false},{"title":"White \/ Bell Symbol","offer_id":52371101974709,"sku":"QBP591254-V5","price":2.99,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Press Symbol","offer_id":52371102007477,"sku":"QBP591254-V6","price":2.8,"currency_code":"USD","in_stock":false},{"title":"Silver \/ O\/I Symbol","offer_id":52371102040245,"sku":"QBP591254-V7","price":4.01,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Bell Symbol","offer_id":52371102073013,"sku":"QBP591254-V8","price":3.71,"currency_code":"USD","in_stock":false},{"title":"White \/ Light Symbol","offer_id":52371102105781,"sku":"QBP591254-V9","price":3.24,"currency_code":"USD","in_stock":false},{"title":"White \/ O\/I Symbol","offer_id":52371102138549,"sku":"QBP591254-V10","price":3.24,"currency_code":"USD","in_stock":false},{"title":"White \/ Key Symbol","offer_id":52371102171317,"sku":"QBP591254-V11","price":3.24,"currency_code":"USD","in_stock":false},{"title":"White \/ Press Symbol","offer_id":52371102204085,"sku":"QBP591254-V12","price":2.71,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Customizable","offer_id":52371102236853,"sku":"QBP591254-V13","price":3.37,"currency_code":"USD","in_stock":false},{"title":"White \/ Plane","offer_id":52371102269621,"sku":"QBP591254-V14","price":2.19,"currency_code":"USD","in_stock":false},{"title":"White \/ Lightable","offer_id":52371102302389,"sku":"QBP591254-V15","price":1.76,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1319224_qbp591254.png?v=1774059654"},{"product_id":"qbp472986","title":"Vimar Idea Interchangeable 1-Module Button, Thermoplastic, Matt","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea 16971 is a family of interchangeable 1-module buttons in plastic for Vimar Idea simple push-button and rocker push-button assemblies. It is the visible front button rather than the electrical mechanism, so it is used when a worn cap needs replacing, when a panel finish needs to be matched again, or when the switch legend on an existing installation needs to be corrected. The range comes in grey or white, with matte untreated thermoplastic surfaces and color references that include grey RAL 7015 and white RAL 9001.\u003c\/p\u003e\u003cp\u003eOn a boat, this type of spare part makes sense where the vessel already uses Vimar Idea switchgear in the cabin, helm console, or service panel. Matching the legend matters here because some versions are made for simple push-button layouts, while others are made for rocker push-button layouts, so the front symbol needs to match the way the circuit is actually operated on board.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eInterchangeable 1-module front button for the Vimar Idea range\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction with an untreated matte surface\u003c\/li\u003e\n\u003cli\u003eAvailable in grey and white to match existing switchgear finish\u003c\/li\u003e\n\u003cli\u003eGrey versions correspond to RAL 7015, white versions correspond to RAL 9001\u003c\/li\u003e\n\u003cli\u003eLegend options across the range include Arrows, ON\/OFF, General, Regulation, and name-plate formats\u003c\/li\u003e\n\u003cli\u003eIncludes versions for simple push-button use and versions for rocker push-button use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range changes mainly by finish and front legend. Available finishes are Grey and White, and the listed legend options include Arrows, ON\/OFF, General, Regulation, Regulation Arrows, 1 Name-plate, and 2 Name-Plates.\u003c\/p\u003e\u003cp\u003eThe button style also changes across the range. General and 1 Name-plate versions are used with simple push-button layouts, while Arrows, ON\/OFF, Regulation, 2 Name-Plates, and the listed Regulation Arrows version are used with rocker push-button layouts. Before ordering, match the symbol, color, and button style to the mechanism already installed on the boat.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis part suits installations already built around Vimar Idea 1-module controls. It does not replace the switch or push-button mechanism behind the face, so the existing insert, support frame, and cover plate still need to match. For marine refits, that means checking the current Vimar Idea hardware before ordering rather than choosing by color alone.\u003c\/p\u003e\u003cp\u003eBecause this is a front button cap, water resistance and overall panel protection depend on the complete assembly and where it is mounted. It is a practical match for protected interior locations such as cabins, enclosed helms, and service panels where Vimar Idea switchgear is already in use.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eReplacement starts with identifying the correct Idea mechanism already on the panel, then matching the front button by symbol, color, and operating style. Name-plate versions are useful where onboard labeling matters more than a printed symbol, such as custom accessory circuits or refitted service panels.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White \/ Arrows","offer_id":52371110330549,"sku":"QBP472986-V1","price":6.48,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Arrows","offer_id":52371110363317,"sku":"QBP472986-V2","price":6.48,"currency_code":"USD","in_stock":false},{"title":"Grey \/ ON\/OFF","offer_id":52371110396085,"sku":"QBP472986-V3","price":6.48,"currency_code":"USD","in_stock":false},{"title":"White \/ ON\/OFF","offer_id":52371110428853,"sku":"QBP472986-V4","price":6.48,"currency_code":"USD","in_stock":false},{"title":"Grey \/ 2 Name-Plates","offer_id":52371110461621,"sku":"QBP472986-V5","price":5.99,"currency_code":"USD","in_stock":false},{"title":"White \/ 2 Name-Plates","offer_id":52371110494389,"sku":"QBP472986-V6","price":5.99,"currency_code":"USD","in_stock":false},{"title":"Grey \/ General","offer_id":52371110527157,"sku":"QBP472986-V7","price":5.99,"currency_code":"USD","in_stock":false},{"title":"White \/ General","offer_id":52371110559925,"sku":"QBP472986-V8","price":5.99,"currency_code":"USD","in_stock":false},{"title":"Grey \/ 1 Name-plate","offer_id":52371110592693,"sku":"QBP472986-V9","price":5.99,"currency_code":"USD","in_stock":false},{"title":"White \/ 1 Name-plate","offer_id":52371110625461,"sku":"QBP472986-V10","price":5.99,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Regulation","offer_id":52371110658229,"sku":"QBP472986-V11","price":5.99,"currency_code":"USD","in_stock":false},{"title":"White \/ Regulation","offer_id":52371110690997,"sku":"QBP472986-V12","price":5.99,"currency_code":"USD","in_stock":false},{"title":"White \/ Regulation Arrows","offer_id":52371110723765,"sku":"QBP472986-V13","price":6.48,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1318225_qbp472986.webp?v=1774059947"},{"product_id":"qbp522213","title":"Vimar E14 Lampholder, 3\/8 in Thread, Glass-Reinforced Polyester Resin","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Vimar E14 lampholder is a replacement holder for fittings that use an E14 bulb base, with versions in black or white and in threaded skirt or threaded dome\/skirt form. The range uses a glass-reinforced polyester resin body, and the threaded skirt versions use an M10x1 nipple with a locking screw.\u003c\/p\u003e\u003cp\u003eOn a boat, this is the kind of spare part that makes sense when the light fitting is still worth keeping but the holder needs to match the original lamp base and mounting style. It is most useful in compact interior fixtures where space is limited and where changing the whole fitting would take more work than replacing the holder itself.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eE14 Edison lampholder format for fixtures built around a small screw-base bulb\u003c\/li\u003e\n\u003cli\u003eGlass-reinforced polyester resin body\u003c\/li\u003e\n\u003cli\u003eRange includes both threaded skirt and threaded dome\/skirt constructions\u003c\/li\u003e\n\u003cli\u003eThreaded skirt versions use an M10x1 nipple with a locking screw\u003c\/li\u003e\n\u003cli\u003eAvailable in black and white to match the fixture finish more closely\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations so the holder style and visible finish can be matched to the light fitting you are repairing or building.\u003c\/p\u003e\u003cp\u003eAcross the range, the changes are color and holder body style. All four versions use the E14 lamp holder format and a glass-reinforced polyester resin body. The threaded skirt versions are VM02127 and VM02127.B, while VM02127.S and VM02127.S.B use the threaded dome\/skirt form.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM02127.B: White finish, threaded skirt. This version suits fixtures that already use the threaded skirt body and need a lighter visible finish.\u003c\/li\u003e\n\u003cli\u003eVM02127: Black finish, threaded skirt. This keeps the same threaded skirt layout for installations where the darker holder blends in better.\u003c\/li\u003e\n\u003cli\u003eVM02127.S.B: White finish, threaded dome\/skirt. This version adds the dome\/skirt body style for fittings built around that threaded entry shape, with a white finish.\u003c\/li\u003e\n\u003cli\u003eVM02127.S: Black finish, threaded dome\/skirt. This keeps the dome\/skirt configuration and changes the visible finish to black.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, confirm that your fixture uses an E14 holder and check which body style you are replacing. The difference between the threaded skirt versions and the threaded dome\/skirt versions matters when the holder has to sit correctly inside an existing shade ring, cover, or light housing.\u003c\/p\u003e\u003cp\u003eThis range is a good match for refits where the fixture body stays in place and only the holder is being replaced. That is often the case with cabin lights, berth lamps, and other small onboard fittings where the original mechanical layout needs to stay close to what is already installed.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eFit is more important here than broad compatibility claims. Check the bulb base, the holder form, and the thread arrangement before installation, and compare them to the part already in the light. For exposed locations, the sealing of the complete fixture still depends on the housing, lens, and cable entry, not only on the lampholder itself.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White \/ Threaded Skirt","offer_id":52371118293173,"sku":"QBP522213-V1","price":3.91,"currency_code":"USD","in_stock":false},{"title":"Black \/ Threaded Skirt","offer_id":52371118325941,"sku":"QBP522213-V2","price":3.28,"currency_code":"USD","in_stock":false},{"title":"White \/ Threaded Dome\/Skirt","offer_id":52371118358709,"sku":"QBP522213-V3","price":3.04,"currency_code":"USD","in_stock":false},{"title":"Black \/ Threaded Dome\/Skirt","offer_id":52371118391477,"sku":"QBP522213-V4","price":2.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1318569_qbp522213.webp?v=1774060235"},{"product_id":"qbp496653","title":"Vimar E27 90° Lampholder, Screw Mounting, Glass-Reinforced Polyester Resin","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Vimar E27 90° lampholder is a right-angle Edison lamp holder for E27 screw-base lamps, with a glass-reinforced polyester resin body, screw mounting, a 3\/8 inch nipple thread, and an overall size of 3.8 x 7 x 5.7 cm. The 90° layout helps when a bulb needs to sit sideways inside a compact light housing or against a bulkhead rather than extending straight out.\u003c\/p\u003e\u003cp\u003eIt fits straightforward replacement work and simple fixture builds where the socket format is already E27. For marine refits, that makes it useful in cabin lights, utility lights, and other enclosed fittings where clearance and socket angle matter as much as the lamp itself.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eE27 Edison lampholder format for standard E27 screw-base lamps\u003c\/li\u003e\n\u003cli\u003e90° body changes the lamp exit angle where housing depth or side clearance is tight\u003c\/li\u003e\n\u003cli\u003eGlass-reinforced polyester resin body\u003c\/li\u003e\n\u003cli\u003eScrew mounting with a 3\/8 inch nipple thread\u003c\/li\u003e\n\u003cli\u003eApproximate size of 3.8 x 7 x 5.7 cm for fixture fit checks\u003c\/li\u003e\n\u003cli\u003eAvailable in black or white body color\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two color configurations.\u003c\/p\u003e\u003cp\u003eThe change between the listed variants is body color. The E27 format, 90° body, screw mounting, 3\/8 inch nipple thread, and overall size remain the same across both versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM02115.B: White body. This keeps the holder less visible in white cabin liners, light housings, and interior fixtures.\u003c\/li\u003e\n\u003cli\u003eVM02115: Black body. This works where the holder sits against a dark housing, trim, or fixture body.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCheck the existing fixture for an E27 lamp holder and confirm there is room for a right-angle body. A 90° holder can solve clearance issues in shallow housings or wall-mounted fittings, but it is not a direct substitute for a straight socket where the bulb needs to project forward.\u003c\/p\u003e\u003cp\u003eThis suits owners, electricians, and yards replacing a broken holder in a basic light assembly where the visible socket color also matters. Socket type does not define system voltage, so the lamp, wiring, and complete fixture still need to match the electrical setup on board.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe holder uses screw mounting and a 3\/8 inch nipple thread, so it is easiest to fit where the fixture hardware already follows that layout. Before closing the housing, check wire routing, bulb clearance, and lamp direction so the 90° body works with the reflector, shade, or lens.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":52371122061493,"sku":"QBP496653-V1","price":8.59,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":52371122094261,"sku":"QBP496653-V2","price":6.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1320182_qbp496653.webp?v=1774060579"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/spare-parts.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}