{"title":"Solar Charge Controllers","description":"","products":[{"product_id":"qbp509921","title":"Victron Energy BlueSolar MPPT Solar Charge Controller, 12\/24V, Load Output","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy BlueSolar MPPT is a solar charge controller range for charging 12V and 24V battery banks from photovoltaic panels, with variants covering 75V or 100V maximum PV open circuit voltage and 10A or 15A rated charge current.\u003c\/p\u003e\u003cp\u003eIt is a practical fit for boats with solar panels on a hardtop, cabin roof, arch, or rail, where light can change quickly with clouds, rigging shadows, and movement at anchor. The MPPT tracking helps recover more usable power from the array than a PWM controller, especially when the panel output is changing through the day.\u003c\/p\u003e\u003cp\u003eThe range includes a load output, BatteryLife battery management, a programmable multi-stage charge algorithm, and VE.Direct communication for monitoring and setup through compatible Victron accessories and GX systems.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eUltra-fast MPPT tracking can improve energy harvest by up to 30% compared with PWM controllers and up to 10% compared with slower MPPT controllers in changing light.\u003c\/li\u003e\n\u003cli\u003eAutomatic 12V\/24V battery voltage selection matches common small-vessel house battery systems.\u003c\/li\u003e\n\u003cli\u003eLoad output can disconnect connected DC loads at a preset voltage to reduce the risk of excessive battery discharge.\u003c\/li\u003e\n\u003cli\u003eBatteryLife algorithm adjusts the load disconnect level when the battery is not reaching a full recharge regularly, helping lead-acid banks recover more completely over time.\u003c\/li\u003e\n\u003cli\u003eProgrammable multi-stage charge algorithm supports adjustable absorption and float voltage settings.\u003c\/li\u003e\n\u003cli\u003eVE.Direct data port allows integration with compatible Victron displays, GX devices, USB interfaces, and the VE.Direct Bluetooth Smart dongle.\u003c\/li\u003e\n\u003cli\u003eBluetooth monitoring requires the VE.Direct Bluetooth Smart dongle, which is useful when the controller is installed in a locker or electrical compartment.\u003c\/li\u003e\n\u003cli\u003eIP43 rating for electronic components and IP22 rating for the connection area mean the controller should be installed in a dry, protected, ventilated space rather than in an exposed cockpit or deck location.\u003c\/li\u003e\n\u003cli\u003e6 mm2 or AWG10 power terminals support clean wiring for small marine solar arrays.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis BlueSolar MPPT range is offered in three configurations. The variant choice changes the maximum PV open circuit voltage and the rated charge current, which are the two main limits to check against the boat’s solar panel wiring and battery bank size.\u003c\/p\u003e\u003cp\u003eThe listed versions share the same core functions: MPPT charging, automatic load disconnect, VE.Direct communication, programmable charging, BatteryLife battery management, and 12V\/24V battery support.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSCC010015200R: Voltage MAX 100V and Amperage 15A. This version gives the range’s higher PV voltage ceiling while keeping the 15A charge current, useful where the panel string voltage is higher.\u003c\/li\u003e\n\u003cli\u003eSCC010015050R: Voltage MAX 75V and Amperage 15A. This version keeps the 15A charge current with a 75V PV input limit for smaller panel strings.\u003c\/li\u003e\n\u003cli\u003eSCC010010050R: Voltage MAX 75V and Amperage 10A. This version uses the 75V PV input limit with a 10A charge current for lighter solar charging setups.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eFor marine electrical planning, the two numbers that matter first are the PV open circuit voltage limit and the charge current. The solar panel array must stay within the selected controller’s voltage limit, including cold-weather voltage rise, and the charge current rating should match the expected array output for the battery system.\u003c\/p\u003e\u003cp\u003eThe 75\/10 model is rated for up to 145W of nominal PV power on 12V systems and 290W on 24V systems. The 75\/15 and 100\/15 models are rated for up to 220W on 12V systems and 440W on 24V systems. All listed models use a VE.Direct port for data communication.\u003c\/p\u003e\u003ch6\u003eInstallation and marine use\u003c\/h6\u003e\u003cp\u003eInstall the controller close enough to the battery bank to keep DC cable runs sensible, while leaving room for ventilation and service access. The enclosure ratings are not for open spray exposure, so a dry electrical locker, cabin service area, console interior, or protected equipment bay is a better location than a wet lazarette or exposed helm panel.\u003c\/p\u003e\u003cp\u003eThe 75V models measure 100 x 113 x 40 mm, while the 100\/15 model measures 100 x 113 x 50 mm. That compact footprint helps when adding solar charging to an existing DC system where space around the breaker panel or battery compartment is limited.\u003c\/p\u003e\u003ch6\u003eGood match on board\u003c\/h6\u003e\u003cp\u003eThis range works well for small to mid-size solar charging systems on cruising boats, fishing boats, and sailboats where the goal is to maintain or recharge a 12V or 24V house bank from deck-mounted panels. It also fits boats that already use Victron monitoring hardware, since the VE.Direct port can feed charge data into compatible Victron accessories and GX displays.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"100V \/ 15A","offer_id":52023128424629,"sku":"QBP509921-V6","price":64.6,"currency_code":"USD","in_stock":true},{"title":"75V \/ 15A","offer_id":52023128457397,"sku":"QBP509921-V3","price":52.7,"currency_code":"USD","in_stock":true},{"title":"75V \/ 10A","offer_id":52023128490165,"sku":"QBP509921-V4","price":47.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335755_qbp509921.webp?v=1780191753"},{"product_id":"qbp510414","title":"Victron Energy BlueSolar PWM-Light Solar Charge Controller, 12\/24V, Low Voltage Load Disconnect, Lighting Control","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy BlueSolar PWM-Light Charge Controller is a 12\/24V PWM solar charge controller for simple off-grid charging on boats, with automatic system voltage detection and rated charge current options from 5A to 30A. It suits protected onboard solar installations where a panel or small solar array is used to maintain or recharge a house, lighting, or auxiliary battery bank.\u003c\/p\u003e\u003cp\u003eThe controller uses three-stage charging with bulk, absorption, and float stages. It also includes a load output with low battery voltage disconnect, a single-timer lighting control function, and a two-digit seven-segment display for setting load behavior without adding a separate remote display.\u003c\/p\u003e\u003cp\u003eFor marine use, the IP20 enclosure should be mounted in a dry, protected location such as an electrical locker, cabin panel area, or sheltered console, not where it will see spray or washdown water. The unit supports a maximum solar voltage of 28V on 12V systems and 55V on 24V systems.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12\/24V battery system support with automatic voltage detection after battery connection.\u003c\/li\u003e\n\u003cli\u003ePWM solar charging with bulk, absorption, and float stages for straightforward battery maintenance.\u003c\/li\u003e\n\u003cli\u003eLoad output includes low voltage disconnect to help protect the battery from excessive discharge.\u003c\/li\u003e\n\u003cli\u003eLighting control with one timer, plus day and night timing modes for simple onboard light circuits.\u003c\/li\u003e\n\u003cli\u003eTwo-digit seven-segment display for setting and checking load output functions at the controller.\u003c\/li\u003e\n\u003cli\u003eProtection for battery reverse polarity by fuse, output short circuit, over temperature, and overload conditions.\u003c\/li\u003e\n\u003cli\u003eIP20 enclosure with 5 mm² or AWG10 terminals for protected indoor mounting.\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -20°C to +50°C at full load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis BlueSolar PWM-Light controller range is offered in four amperage configurations for different solar array and load sizes.\u003c\/p\u003e\u003cp\u003eThe amperage rating changes by variant, while the 12\/24V automatic voltage detection, PWM charging method, low voltage load disconnect, IP20 enclosure rating, terminal size, and 70 x 133 x 33.5 mm housing dimensions remain consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSCC010010000, Amperage 10A. This version fits small onboard solar charging setups where the connected solar current stays within a 10A controller rating.\u003c\/li\u003e\n\u003cli\u003eSCC010030020, Amperage 30A. This version covers the highest current rating in the 12\/24V PWM-Light range for larger protected solar installations.\u003c\/li\u003e\n\u003cli\u003eSCC010020020, Amperage 20A. This mid-range version gives more current capacity than the 10A model while keeping the same controller format and basic setup method.\u003c\/li\u003e\n\u003cli\u003eSCC010005000, Amperage 5A. This lower-current version suits compact solar maintenance or lighting-control circuits on small 12V or 24V systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eConnect the battery before connecting the solar array so the controller can recognize whether it is working on a 12V or 24V system. The display shows 12 or 24 when the battery voltage has been detected, which is a useful check during installation.\u003c\/p\u003e\u003cp\u003eUse a 36-cell solar panel arrangement for a 12V battery system. For a 24V battery system, use a 72-cell solar array or two 36-cell panels in series. Solar and load ratings should not be exceeded, and the controller should be mounted vertically indoors with natural convection space around it.\u003c\/p\u003e\u003ch6\u003eElectrical and load behavior\u003c\/h6\u003e\u003cp\u003eAbsorption charge voltage is 14.2V on 12V systems and 28.4V on 24V systems. Float voltage is 13.8V on 12V systems and 27.6V on 24V systems, with very low self-consumption of less than 10 mA.\u003c\/p\u003e\u003cp\u003eThe load output disconnects at 11.2V or 22.4V to reduce the chance of deep discharge. It can reconnect manually at 12.6V or 25.2V, or automatically at 13.1V or 26.2V after the battery has recovered.\u003c\/p\u003e\u003ch6\u003eMarine fit and mounting\u003c\/h6\u003e\u003cp\u003eThis controller is a practical fit for boats that need simple solar charging without network integration or app-based configuration. Typical locations include a dry cabin electrical panel, a protected locker near the battery bank, or a helm console that is shielded from spray.\u003c\/p\u003e\u003cp\u003eBecause the enclosure is IP20, it should not be installed in an engine space with heavy moisture, an exposed cockpit, or anywhere saltwater can reach the terminals. In a marine installation, keeping the controller dry, strain-relieving the wiring, and protecting circuits with the correct fusing are as important as selecting the right amperage rating.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"10A","offer_id":52023128850613,"sku":"QBP510414-V6","price":20.4,"currency_code":"USD","in_stock":false},{"title":"30A","offer_id":52023128883381,"sku":"QBP510414-V7","price":54.4,"currency_code":"USD","in_stock":true},{"title":"20A","offer_id":52023128916149,"sku":"QBP510414-V1","price":39.1,"currency_code":"USD","in_stock":true},{"title":"5A","offer_id":52023128948917,"sku":"QBP510414-V5","price":17.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335758_qbp510414.jpg?v=1780191753"},{"product_id":"qbp214840","title":"Dock Edge - Starlite Solar Capacitor Series 108","description":"\u003ch4\u003eIlluminate Your Marine Adventures with Starlite Solar Capacitor Series - Model 108\u003c\/h4\u003e \u003cp\u003eDiscover unparalleled reliability and elegance with the Starlite Solar Capacitor Series - Model 108, designed specifically for those who value design, durability, and functionality in marine environments. This advanced solar lighting solution not only stands out for its robust construction but also for its exceptional efficiency, ensuring you have the light you need, when you need it. Engineered to outshine, these lights absorb sunlight and store energy more efficiently than ever, thanks to a cutting-edge capacitor. This means even on days when the sun is shy, your path is illuminated without interruption. DockEdge+ is proud to introduce this series, promising an impressive 5-year warranty and a promise of satisfaction in its luminous performance.\u003c\/p\u003e \u003ch4\u003eEffortless Elegance Meets Technological Triumph\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eAutomatic activation at dusk for hassle-free operation\u003c\/li\u003e \u003cli\u003eCharcoal grey color for a sleek, unobtrusive look\u003c\/li\u003e \u003cli\u003eConstructed from premium aluminum \u0026amp; polycarbonate for durability\u003c\/li\u003e \u003cli\u003eFeatures 6 LEDs with a light output of 5 lumens\u003c\/li\u003e \u003cli\u003eEquipped with a high-capacity Ni-MH 700mAh battery and a 2.5V, 95mA solar panel\u003c\/li\u003e \u003cli\u003eSuper Capacitor technology ensures reliable lighting even on low-sunlight days\u003c\/li\u003e \u003cli\u003eIP67 waterproof rating and a load capacity of 30 tons for ultimate resilience\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eDesigned to Shine - Dimensions \u0026amp; Build\u003c\/h4\u003e \u003cp\u003eThe Starlite Model 108 boasts compact and efficient dimensions of 4.25\" x 3.46\" x 0.9\", making it an ideal fit for any marine setting. Its robust aluminum and polycarbonate construction not only promise longevity but also offer an aesthetic appeal that complements your marine adventures.\u003c\/p\u003e \u003ch4\u003eA Spectrum of Light for Every Night\u003c\/h4\u003e \u003cp\u003eEvery Model 108 is equipped with 6 LEDs, emitting a soft yet bright light visible up to 1\/2 mile (800M) away, ensuring your marine paths are always well-lit. The charcoal grey finish offers a sophisticated touch to this essential marine accessory.\u003c\/p\u003e \u003ch4\u003eUnyielding in Performance and Style\u003c\/h4\u003e \u003cp\u003eWith variations designed to meet the specific needs of your marine lifestyle, the Starlite Solar Capacitor Series shines in flexibility and functionality. While maintaining consistent high-quality materials and the innovative capacitor system across all variants, each model is tailored to offer unique benefits, ensuring there's a perfect match for every requirement.\u003c\/p\u003e \u003c!-- Note: As variations are tailored to specific needs, detailed specifications for each will vary and are available upon request. --\u003e \u003ch4\u003eYour Eco-friendly Beacon in the Marine World\u003c\/h4\u003e \u003cp\u003eEmbrace the power of solar with the Starlite Series, where each Model 108 not only reduces your carbon footprint but also ensures uninterrupted lighting through its superior capacitor technology. Experience a blend of eco-consciousness and advanced marine lighting, designed for the discerning enthusiast.\u003c\/p\u003e","brand":"Dock Edge","offers":[{"title":"Default Title","offer_id":52023327129781,"sku":"QBP214840","price":39.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1213994_qbp214840.jpg?v=1763253469"},{"product_id":"qbp834146","title":"Mastervolt - Solar Charge Regulator SCM40 PWM","description":"\u003ch4\u003eMaximize Your Solar Power with Mastervolt SCM40 PWM\u003c\/h4\u003e \u003cp\u003eUnlock the full potential of solar energy on your marine adventures with the Mastervolt SCM40 PWM. This high-efficiency solar charge controller ensures quick battery charging, accommodating solar panel configurations up to 3600 Wp. Designed to work seamlessly with a variety of battery types, including AGM, gel, wet, and Mastervolt Lithium Ion, the SCM40 PWM offers a versatile solution to meet your energy needs. Its user-friendly interface allows for easy setting adjustments, ensuring your batteries are optimally charged for a longer lifespan.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHigh efficiency ensures batteries are charged quickly, maximizing solar energy use.\u003c\/li\u003e \u003cli\u003eCompatible with solar panel configurations up to 3600 Wp, catering to various energy demands.\u003c\/li\u003e \u003cli\u003eSupports AGM, gel, wet, and Mastervolt Lithium Ion batteries, providing flexibility in battery choice.\u003c\/li\u003e \u003cli\u003eIncludes a battery temperature sensor to safeguard battery health and extend lifespan.\u003c\/li\u003e \u003cli\u003eAutomatic detection of 12V and 24V systems for hassle-free operation.\u003c\/li\u003e \u003cli\u003eNoiseless operation and a switchable output for a quiet and efficient energy solution.\u003c\/li\u003e \u003cli\u003eEquipped with an LCD display for easy monitoring of charge status and battery settings.\u003c\/li\u003e \u003cli\u003eFully protected against overtemperature, overload, high\/low battery voltage, and more for safe use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Excellence for Sustainable Marine Energy\u003c\/h4\u003e \u003cp\u003eThe Mastervolt SCM40 PWM stands out with its blend of efficiency, versatility, and safety. Its capacity to handle extensive solar panel configurations makes it a pivotal component in your marine energy system. The inclusion of a battery temperature sensor and the flexibility to work with different battery types underscore its commitment to prolonging battery life and ensuring seamless energy management. With automatic system voltage detection and comprehensive protection features, the SCM40 PWM embodies Mastervolt's dedication to reliable and innovative marine power solutions.\u003c\/p\u003e \u003cp\u003eEmbrace silent, efficient, and intelligent solar charging with the Mastervolt SCM40 PWM, your trusted companion for sustainable energy on the water.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":52023376806069,"sku":"QBP834146","price":172.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1214924_qbp834146.jpg?v=1763253925"},{"product_id":"qbp646499","title":"Mastervolt - ChargeMaster SCM20 PWM Solar Charge Regulator","description":"\u003ch4\u003eHarness the Power of the Sun with Mastervolt Solar ChargeMaster SCM20 PWM\u003c\/h4\u003e \u003cp\u003eIntroducing the Mastervolt Solar ChargeMaster SCM20 PWM, your ideal companion for harnessing solar energy efficiently to charge your batteries. Engineered for both 36 cell panels in 12V systems and 72 cell panels in 24V systems, this solar charge regulator utilizes PWM technology to optimize battery charging. Its robust design is specifically tailored for marine and mobile environments, offering protection against water spray and suitability for high ambient temperatures. Enhance your solar charging capabilities with an optional temperature sensor for an even more precise control.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAdvanced PWM technology for efficient battery charging.\u003c\/li\u003e \u003cli\u003eCompatible with 36 cells panels in 12V systems and 72 cells panels in 24V systems.\u003c\/li\u003e \u003cli\u003eWater spray protection and high ambient temperature suitability for marine and mobile use.\u003c\/li\u003e \u003cli\u003eSupports all types of lead-acid batteries in both 12V and 24V configurations.\u003c\/li\u003e \u003cli\u003eLarge display for easy monitoring and switchable output with evening\/night lighting function.\u003c\/li\u003e \u003cli\u003eOptional temperature sensor for enhanced charging precision.\u003c\/li\u003e \u003cli\u003eUser-friendly interface for effortless operation.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eOptimized Solar Charging for Marine and Mobile Applications\u003c\/h4\u003e \u003cp\u003eThe Solar ChargeMaster SCM20 PWM stands out with its flexibility and safety features, making it a top choice for adventurers and professionals alike. Whether you're sailing the high seas or exploring off-grid locations, this solar charge regulator ensures your batteries are efficiently charged, ready to power your journey. Its compatibility with negative grounding systems further enhances its versatility, making it a universal solution for diverse setups. Embrace the power of solar energy with the Mastervolt Solar ChargeMaster SCM20 PWM and enjoy uninterrupted power supply wherever your adventures take you.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":52023376937141,"sku":"QBP646499","price":122.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1214929_qbp646499.jpg?v=1763253929"},{"product_id":"qbp762952","title":"Mastervolt - Solar Charge Controller SCM60 MPPT-MB","description":"\u003ch4\u003eMaximize Solar Efficiency: Mastervolt SCM60 MPPT-MB Solar Controller\u003c\/h4\u003e \u003cp\u003eIntroducing the Mastervolt SCM60 MPPT-MB, the pinnacle of solar charge regulation technology, designed for the demanding needs of large and medium-sized marine solar systems. With the capacity to manage solar panels ranging from 600 to 3600 Wp and compatibility with 12, 24, and 48-volt battery banks, this Solar ChargeMaster stands out as the optimal choice for enhancing your solar energy efficiency. The SCM60 MPPT-MB utilizes Mastervolt's innovative MPPT (Maximum Power Point Tracking) technology to increase your solar panels' efficiency, charging your batteries up to 30% faster than conventional PWM regulators. Its integration into the MasterBus network simplifies monitoring and control, offering a seamless and efficient energy management solution onboard.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eEmploys advanced MPPT technology for up to 30% faster battery charging compared to PWM regulators.\u003c\/li\u003e \u003cli\u003eSupports a wide range of solar panel configurations from 600 to 3600 Wp, optimizing solar energy utilization.\u003c\/li\u003e \u003cli\u003eAutomatic detection of 12\/24\/48 V battery banks for versatile application across various system voltages.\u003c\/li\u003e \u003cli\u003ePre-programmed charging profiles for all battery types, including Mastervolt Lithium Ion, ensuring optimal charging for any setup.\u003c\/li\u003e \u003cli\u003eMasterBus integration for comprehensive system monitoring and control, enhancing operational efficiency and simplifying wiring.\u003c\/li\u003e \u003cli\u003eRobust IP23-rated casing designed for the challenging marine environment, ensuring durability and reliability.\u003c\/li\u003e \u003cli\u003eEquipped with a large, bright display for easy monitoring of charge status and system information.\u003c\/li\u003e \u003cli\u003eQuiet operation and built-in safety protections against overload, overheating, and reverse polarity, prioritizing system and user safety.\u003c\/li\u003e \u003cli\u003eEliminates the need for Lithium Ion safety relay, streamlining system integration and reducing installation complexity.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Superiority for Unparalleled Performance\u003c\/h4\u003e \u003cp\u003eThe SCM60 MPPT-MB is not merely a solar charge regulator; it's a comprehensive energy solution that brings Mastervolt's decade-long expertise into your marine solar system. Its ability to handle high input voltage up to 145 V allows for series connection of panels, significantly reducing cable length and installation time. Whether you're powering a yacht or a marine vessel, the SCM60 MPPT-MB delivers unmatched charging efficiency and system reliability.\u003c\/p\u003e \u003ch4\u003eDesigned for the Demanding Marine Environment\u003c\/h4\u003e \u003cp\u003eWith its durable design and advanced technology, the SCM60 MPPT-MB is built to thrive in the harsh marine environment. Its galvanic isolation ensures uninterrupted performance of sensitive equipment, while the 'smart logic' of MasterBus technology offers a level of automation and customization previously unattainable. From controlling water heaters to integrating seamlessly with Mastervolt Lithium Ion batteries, the SCM60 MPPT-MB redefines what's possible in marine solar power management.\u003c\/p\u003e \u003ch4\u003eA New Era of Solar Charge Management with Mastervolt\u003c\/h4\u003e \u003cp\u003eEmbrace the future of marine solar energy with the Mastervolt SCM60 MPPT-MB Controller. Its combination of efficiency, flexibility, and advanced technology makes it an essential component of any high-performance solar system. Upgrade to the SCM60 MPPT-MB and experience the Mastervolt difference: faster charging, enhanced system integration, and the ultimate in safety and reliability on the open seas.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":52023384998069,"sku":"QBP762952","price":1339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1215152_qbp762952.jpg?v=1763254040"},{"product_id":"qbp108753","title":"Mastervolt - Solar Charge Master SCM25 MPPT","description":"\u003ch4\u003eOptimize Your Solar Power: Mastervolt SCM25 MPPT Solar ChargeMaster\u003c\/h4\u003e \u003cp\u003eIntroducing the Mastervolt SCM25 MPPT Solar ChargeMaster, a pinnacle of compact, efficient solar charge regulation for your marine vessel. Engineered to harness the full potential of your solar panels, this ChargeMaster delivers unparalleled charging efficiency, transforming solar energy into usable power faster and more effectively. Designed for small to medium solar systems, it accommodates 200 to 700 Wp in solar panels with ease. Its MPPT (Maximum Power Point Tracking) technology ensures up to 30% faster battery charging than conventional PWM regulators, making it a crucial component for any eco-conscious mariner looking to optimize their energy usage.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUnmatched efficiency with Mastervolt's MPPT technology for faster charging times.\u003c\/li\u003e \u003cli\u003eCompatible with a wide range of solar panels, including the cost-effective 60-cell models.\u003c\/li\u003e \u003cli\u003eSupports solar panel configurations from 200 to 700 Wp, offering flexibility in system size.\u003c\/li\u003e \u003cli\u003ePre-programmed charging profiles for all battery types, including Mastervolt Lithium Ion, for easy selection.\u003c\/li\u003e \u003cli\u003eAutomatic 12\/24 V detection for seamless system integration.\u003c\/li\u003e \u003cli\u003eIncorporates a battery temperature sensor to maximize battery life.\u003c\/li\u003e \u003cli\u003eFeatures a large, bright display for easy monitoring and control.\u003c\/li\u003e \u003cli\u003eEquipped with a switchable output and buzzer for safe operation and malfunction alerts.\u003c\/li\u003e \u003cli\u003eQuiet operation and a robust casing suitable for humid environments (IP23).\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Advancements for Superior Solar Charging\u003c\/h4\u003e \u003cp\u003eThe SCM25 MPPT Solar ChargeMaster is not just about charging; it's about doing so with maximum efficiency and precision. Its advanced MPPT technology ensures that every ray of sunlight is effectively converted into electrical power, significantly enhancing the performance of your solar panels. With the ability to cater to different types of solar cells and automatically adjust to 12\/24 V systems, the SCM25 MPPT is a versatile solution for maintaining optimal battery health and extending your time at sea.\u003c\/p\u003e \u003ch4\u003eDesigned for the Demanding Marine Environment\u003c\/h4\u003e \u003cp\u003eMarine adventures demand equipment that's not only powerful but also capable of withstanding the harsh conditions at sea. The SCM25 MPPT's IP23-rated casing protects against condensation, while built-in safety features guard against overload, high\/low battery voltage, overheating, short circuits, and reverse polarity. Its user-friendly interface, complete with a clear display and flexible charging characteristics, ensures that you're always in control of your energy resources.\u003c\/p\u003e \u003ch4\u003eSail Further with Mastervolt SCM25 MPPT ChargeMaster\u003c\/h4\u003e \u003cp\u003eMake the Mastervolt SCM25 MPPT Solar ChargeMaster the heart of your marine solar power system and experience the freedom of extended sea voyages powered by the sun. With its superior charging capabilities, safety features, and robust design, it's an essential tool for any mariner looking to harness solar energy efficiently. Choose Mastervolt SCM25 MPPT for an eco-friendly, reliable power solution on your next maritime adventure.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":52023395647669,"sku":"QBP108753","price":471.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1215427_qbp108753.jpg?v=1763254169"},{"product_id":"qbp595738","title":"Samlex - Flush Mount Solar Charge Controller - LCD Display, 30A","description":"\u003ch4\u003eOptimize Your Solar Power: Samlex Flush Mount Solar Charge Controller w\/LCD Display - 30A\u003c\/h4\u003e \u003cp\u003eIntroducing the Samlex 30 Amp Flush Mount Solar Charge Controller, your solution to efficient and safe solar power management. This advanced controller is designed to regulate the current flow to your batteries, ensuring they're charged optimally while preventing overcharging. Its 4-stage charging process, including Bulk, Absorption, Float, and Equalization, caters to the specific needs of your battery, extending its lifespan. The controller features Pulse Width Modulated (PWM) charging, recognized as the most efficient method to charge batteries. An intuitive digital LCD monitor displays operational parameters and fault messages clearly, making it easy to monitor your system's status. With 8 selectable battery charging profiles and the option for temperature-compensated charging with an additional Temperature Sensor, this controller is versatile and adaptable to your specific needs.\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePulse Width Modulated (PWM) charging for efficient battery charging\u003c\/li\u003e \u003cli\u003e4-stage battery charging process: Bulk, Absorption, Float, and Equalization\u003c\/li\u003e \u003cli\u003e8 selectable battery charging profiles to fit various battery types\u003c\/li\u003e \u003cli\u003eTemperature compensated charging for accuracy (optional Temperature Sensor required)\u003c\/li\u003e \u003cli\u003eDigital LCD display for easy monitoring of operational parameters and fault messages\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Excellence for Your Solar System\u003c\/h4\u003e \u003cp\u003eThe Samlex Flush Mount Solar Charge Controller not only offers superior charging capabilities but also boasts a sleek design that fits flush with your mounting surface, ensuring a clean and unobtrusive installation. Whether for recreational vehicles, service vehicles, boats, field work, telecommunications, mobile offices, or construction sites, this controller provides reliable performance and durability.\u003c\/p\u003e \u003ch4\u003eSpecifications\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eInput Voltage: 12V \/ 24V\u003c\/li\u003e \u003cli\u003eCurrent Capacity: 30 Amps\u003c\/li\u003e \u003cli\u003eWeight: 0.8 lbs (0.36 kg)\u003c\/li\u003e \u003cli\u003eDimensions: 7.5 x 4.25 x 1.5 inches (19.1 x 10.8 x 3.8 cm)\u003c\/li\u003e \u003cli\u003e5 Year Limited Warranty\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eSafe, Efficient, and Intelligent Solar Charging\u003c\/h4\u003e \u003cp\u003eWith the Samlex Solar Charge Controller, you're investing in the safety, efficiency, and longevity of your solar power system. Its comprehensive features, from PWM charging to a detailed LCD display, ensure you have all the tools necessary to manage your solar energy effectively. Embrace the future of power with Samlex.\u003c\/p\u003e \u003c!-- Variations section would go here if provided --\u003e","brand":"Samlex America","offers":[{"title":"Default Title","offer_id":52023431037109,"sku":"QBP595738","price":157.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1216375_qbp595738.jpg?v=1763254606"},{"product_id":"qbp305058","title":"Samlex - Solar Charge Controller - 12V, 8A","description":"\u003ch4\u003eEnhance Solar Efficiency: Samlex 12V 8A Solar Charge Controller\u003c\/h4\u003e \u003cp\u003eMaximize the performance of your solar panel system with the \u003cstrong\u003eSamlex Solar Charge Controller - 12V - 8A\u003c\/strong\u003e. This micro-controller based unit offers intelligent, automatic operation tailored for 12V nominal solar panels and battery systems, ensuring optimal efficiency and battery life. It supports up to 150 Watts of solar power and is compatible with both Flooded\/Wet Cell and Sealed AGM batteries. Designed for rigorous outdoor use, it features a 3 Stage charging process (Bulk, Absorption, Float) for a complete return of capacity and extended battery longevity.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIntelligent micro-controller base ensures automatic, optimized operation\u003c\/li\u003e \u003cli\u003e3 Stage charging process for enhanced battery life and efficiency\u003c\/li\u003e \u003cli\u003eCompatible with Flooded\/Wet Cell or Sealed AGM batteries\u003c\/li\u003e \u003cli\u003eIP65 rated, splash-proof and weather-resistant design\u003c\/li\u003e \u003cli\u003eAutomatic lighting control for dusk till dawn operation\u003c\/li\u003e \u003cli\u003eReverse current blocking for night-time battery discharge prevention\u003c\/li\u003e \u003cli\u003eComprehensive protection against Overload, Over-Temperature, and more\u003c\/li\u003e \u003cli\u003eOperates effectively across a wide temperature range of -40°C to +60°C\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Specifications\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eInput Voltage: 12V, accommodating standard solar panel setups\u003c\/li\u003e \u003cli\u003eCurrent Handling: 8 Amps, suitable for systems up to 150 Watts\u003c\/li\u003e \u003cli\u003eCompact and lightweight design: Weighing only 0.28 lbs (0.13 kg)\u003c\/li\u003e \u003cli\u003eDimensions: 3.8 x 1.8 x 1.0 inches (9.65 x 4.57 x 2.54 cm) for easy installation\u003c\/li\u003e \u003cli\u003eComes with FCC, CE, and IP65 certifications, ensuring safety and durability\u003c\/li\u003e \u003cli\u003eBacked by a 5-Year Limited Warranty for peace of mind\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eApplications Across the Board\u003c\/h4\u003e \u003cp\u003eThe Samlex Solar Charge Controller is versatile for a wide range of applications, from off-grid mobile rural systems and rural electrification to remote equipment power supplies. It's an ideal choice for monitoring systems in the oil \u0026amp; gas industry, traffic, security, environmental monitoring, and water pumping systems, showcasing its adaptability and reliability in various settings.\u003c\/p\u003e \u003ch4\u003eReliable Solar Power Management\u003c\/h4\u003e \u003cp\u003eWith the Samlex 12V 8A Solar Charge Controller, you gain a reliable partner in solar power management. Its advanced features, robust protections, and wide application make it a must-have for anyone looking to optimize their solar power setup. Ensure the longevity and efficiency of your solar batteries with this intelligent charge controller.\u003c\/p\u003e","brand":"Samlex America","offers":[{"title":"Default Title","offer_id":52023431069877,"sku":"QBP305058","price":65.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1216376_qbp305058.jpg?v=1763254607"},{"product_id":"qbp629758","title":"Samlex - Solar Charge Controller - 12\/24V, 10A","description":"\u003ch4\u003eOptimize Your Marine Solar Power with Samlex's 10A Solar Charge Controller\u003c\/h4\u003e \u003cp\u003eEmbark on your marine adventures with confidence, thanks to the \u003cstrong\u003eSamlex 10A Solar Charge Controller\u003c\/strong\u003e. Tailored for the maritime realm, this controller is a compact powerhouse designed to manage your solar energy system efficiently. Whether you're navigating the open seas or anchored in a tranquil bay, it ensures your batteries are charged safely and effectively. Suitable for both 12V and 24V systems, this versatile device adapts to your vessel's specific power needs, supporting up to 160W panels for 12V batteries and up to 320W for 24V batteries.\u003c\/p\u003e \u003ch4\u003eKey Features for Maximum Solar Efficiency\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eAdvanced micro-controller for precise Series Type PWM Charging\u003c\/li\u003e \u003cli\u003eAuto battery voltage detection for 12V \/ 24V Lead Acid, Sealed AGM Batteries\u003c\/li\u003e \u003cli\u003eProtection features including 10A rated load terminals and low battery disconnect\u003c\/li\u003e \u003cli\u003eIntegrated battery voltage temperature compensation to prevent under\/overcharging\u003c\/li\u003e \u003cli\u003eUser-friendly LED display for easy monitoring of system status\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eDurable and User-Friendly Design\u003c\/h4\u003e \u003cp\u003eThe Samlex 10A Solar Charge Controller is engineered for the harsh marine environment, offering a robust solution for your solar charging needs. Its user-friendly LED display allows for easy monitoring, ensuring your solar system operates at peak efficiency. With its advanced protection features, you can trust this charge controller to safeguard your batteries against overcharging, undercharging, and other common issues.\u003c\/p\u003e","brand":"Samlex America","offers":[{"title":"Default Title","offer_id":52023431430325,"sku":"QBP629758","price":57.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1216382_qbp629758.jpg?v=1763254610"},{"product_id":"qbp649460","title":"Samlex - Solar Charge Controller - 12\/24V, 20A","description":"\u003ch4\u003eOptimize Your Solar Power: Samlex 20A Solar Charge Controller\u003c\/h4\u003e \u003cp\u003eIntroducing the \u003cstrong\u003eSamlex 20A Solar Charge Controller - 12\/24V\u003c\/strong\u003e, a state-of-the-art solution designed to maximize the efficiency and longevity of your solar power system. The MSK-20A model employs a 3-stage intelligent Series Type PWM (Pulse Width Modulation) charging process, controlled by an advanced microcontroller for unparalleled accuracy and fully automatic operation. Compatible with both 12V and 24V battery systems, this versatile charge controller ensures your batteries are charged safely and efficiently, regardless of the environmental conditions.\u003c\/p\u003e \u003ch4\u003eAdvanced Features for Superior Performance\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e3-stage intelligent PWM charging for optimal battery health\u003c\/li\u003e \u003cli\u003eAutomatic detection of 12V or 24V battery systems\u003c\/li\u003e \u003cli\u003eOperates effectively within a wide temperature range of -35°C to +50°C\u003c\/li\u003e \u003cli\u003eComprehensive electronic protections against overheating, overcharging, over-discharge, overload, and short circuit\u003c\/li\u003e \u003cli\u003eReverse protection for safe connectivity with any solar module and battery combination\u003c\/li\u003e \u003cli\u003eOptional MSK-TS External Temperature Sensor for enhanced charging precision\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eSpecifications Tailored for Marine Use\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eInput Voltage: Auto-selection between 12V and 24V\u003c\/li\u003e \u003cli\u003eCurrent Capacity: 20 Amps, catering to a broad range of solar applications\u003c\/li\u003e \u003cli\u003eCompact and lightweight, weighing just 0.66 lbs (0.3 kgs), for easy installation in confined spaces\u003c\/li\u003e \u003cli\u003eDimensions: 6.28 x 3.2 x 1.89 inches (159.6 x 81.4 x 47.88 mm), ensuring it fits neatly within your setup\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eVersatile Applications for the Modern Mariner\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eIdeal for use in recreational and service vehicles, enhancing off-grid capabilities\u003c\/li\u003e \u003cli\u003ePerfect for boats and marine crafts, providing reliable power management on the water\u003c\/li\u003e \u003cli\u003eSuitable for fieldwork, mobile offices, and telecommunications, where consistent power is critical\u003c\/li\u003e \u003cli\u003eEnhances portable charging kits, ensuring your devices remain powered during your adventures\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eEquip your marine craft with the Samlex 20A Solar Charge Controller for an efficient, reliable, and safe solar charging experience, ensuring you remain powered wherever your journey takes you.\u003c\/p\u003e","brand":"Samlex America","offers":[{"title":"Default Title","offer_id":52023431758005,"sku":"QBP649460","price":93.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1216396_qbp649460.jpg?v=1763254618"},{"product_id":"qbp428231","title":"Samlex - Solar Charge Controller - 12\/24V, 30A","description":"\u003ch4\u003eMaximize Your Solar Efficiency: Samlex 30A PWM Solar Charge Controller\u003c\/h4\u003e \u003cp\u003eIntroducing the \u003cstrong\u003eSamlex Solar Charge Controller - 12\/24 PWM - 30 AMP\u003c\/strong\u003e, a versatile solution designed to enhance your solar power system's efficiency and flexibility. Whether used as a standalone solar charge controller or in conjunction with the EVO inverter\/charger, this device ensures your batteries are charged safely and efficiently. The EVO-30AB is engineered to work seamlessly with the EVO-RC-PLUS, providing a unified control and monitoring solution for both your solar and power conversion systems. Its compatibility with a wide range of battery types, including Lead Acid and Lithium-Ion (LiFePO4), and its capacity to manage up to 600W in a 12V system or 1000W in a 24V system, make it an indispensable tool for any marine, RV, or remote application.\u003c\/p\u003e \u003ch4\u003eCore Features for Enhanced Solar Management\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eIntegrates with EVO inverter\/charger for streamlined programming and operation\u003c\/li\u003e \u003cli\u003eDisplays status for both the EVO inverter\/charger and solar system through the EVO-RC-PLUS remote display (optional)\u003c\/li\u003e \u003cli\u003eSupports a wide variety of battery types for broad application use\u003c\/li\u003e \u003cli\u003eEfficiently manages multiple solar panels, optimizing your energy collection and usage\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eAdditional Features for Comprehensive Control\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eOptional 30AB-TS Battery Temperature Sensor enhances charging efficiency based on temperature\u003c\/li\u003e \u003cli\u003e30 Amp charging capacity to support substantial energy needs\u003c\/li\u003e \u003cli\u003eEight charge settings accommodate different battery types and conditions\u003c\/li\u003e \u003cli\u003eSelectable battery equalization option for optimal battery maintenance\u003c\/li\u003e \u003cli\u003eDesigned for use with both 12V and 24V battery systems, offering flexibility in system design\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Specifications\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eInput Voltage: Automatically detects 12V or 24V systems\u003c\/li\u003e \u003cli\u003eCharging Capacity: 30 Amps, suitable for up to 600W (12V) or 1000W (24V) solar arrays\u003c\/li\u003e \u003cli\u003eCompact and lightweight, with dimensions of 4.81 x 1.87 x 4.15 inches (12.21 x 4.75 x 10.54 cm) and a weight of 0.8 lbs (0.36 kg)\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eVersatile Applications\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eIdeal for recreational and service vehicles, providing reliable power wherever your journey takes you\u003c\/li\u003e \u003cli\u003ePerfect for marine applications, ensuring your boat's batteries are efficiently charged\u003c\/li\u003e \u003cli\u003eSuitable for fieldwork, telecommunications, mobile offices, and construction sites where reliable solar power is crucial\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWith the Samlex 30A PWM Solar Charge Controller, you're equipped to harness solar energy more efficiently and reliably, ensuring your power needs are met with precision and ease.\u003c\/p\u003e","brand":"Samlex America","offers":[{"title":"Default Title","offer_id":52023431790773,"sku":"QBP428231","price":130.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1216398_qbp428231.jpg?v=1763254619"},{"product_id":"qbp822415","title":"Xantrex - PWM Charge Controller - 30A","description":"\u003ch4\u003eEfficient Solar Power Management: Xantrex 30A PWM Charge Controller\u003c\/h4\u003e \u003cp\u003eMaximize the efficiency of your marine solar power system with the Xantrex 30A PWM Charge Controller, specifically designed for the modern mariner. Tailored to charge a wide range of lithium-ion batteries, including LiFePO4, this controller employs Pulse Width Modulation (PWM) for an efficient charge cycle. Its sleek, flush mount design ensures a clean and integrated look aboard any RV, boat, or truck, enhancing both the aesthetics and functionality of your solar setup. Easy to program and equipped with state-of-the-art protections, this charge controller is an essential tool for optimizing solar energy harvesting on the water.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAdvanced PWM technology for efficient battery charging\u003c\/li\u003e \u003cli\u003eSupports a variety of battery types including LiFePO4, AGM, Gel, and Flooded\u003c\/li\u003e \u003cli\u003eFeatures multi-stage charging (Bulk, Absorption, Float, Equalization) for optimal battery health\u003c\/li\u003e \u003cli\u003eIndustrial design for an aesthetic, flush-mount installation\u003c\/li\u003e \u003cli\u003eEquipped with comprehensive PV array and battery protection systems\u003c\/li\u003e \u003cli\u003eIncludes a built-in LCD display for real-time system monitoring\u003c\/li\u003e \u003cli\u003eComes with a 5-year warranty for peace of mind\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Excellence for Solar Efficiency\u003c\/h4\u003e \u003cp\u003eThe Xantrex 30A PWM Charge Controller is at the forefront of charge management technology, offering advanced features to ensure your solar system operates at peak efficiency. Its multi-stage charging process ensures batteries are charged safely and effectively, extending their lifespan and reliability. The controller's compatibility with various battery types makes it a versatile addition to any marine solar power system, ensuring your energy needs are met with precision and care.\u003c\/p\u003e \u003ch4\u003eSleek and Functional Design\u003c\/h4\u003e \u003cp\u003eDesigned with the marine environment in mind, the Xantrex 30A PWM Charge Controller not only performs exceptionally but also boasts a design that complements your vessel's interior. The flush mount feature allows for a seamless integration, avoiding unsightly protrusions and maintaining the aesthetic integrity of your space. Its intuitive interface and built-in LCD display make monitoring and adjusting your solar power system effortless, ensuring you can focus on enjoying your time on the water.\u003c\/p\u003e \u003ch4\u003eUnmatched Protection for Your Solar System\u003c\/h4\u003e \u003cp\u003eEnsure the longevity and safety of your marine solar setup with the Xantrex 30A PWM Charge Controller. It comes equipped with best-in-class protections against overcharging, short-circuiting, and reverse polarity, safeguarding your investment in solar technology. With the added security of a 5-year warranty, this charge controller offers not only efficient energy management but also peace of mind for all your marine adventures.\u003c\/p\u003e","brand":"Xantrex","offers":[{"title":"Default Title","offer_id":52023460200629,"sku":"QBP822415","price":184.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1217463_qbp822415.jpg?v=1763254955"},{"product_id":"qbp294011","title":"Xantrex - MPPT Charge Controller - 30A","description":"\u003ch4\u003eSupercharge Your Solar: Xantrex 30A MPPT Charge Controller\u003c\/h4\u003e \u003cp\u003eUnlock the full potential of your marine solar power system with the Xantrex 30A MPPT Charge Controller. Boasting an industry-leading 98% charging efficiency, this controller utilizes Maximum Power Point Tracking (MPPT) technology to significantly increase your daily energy harvest by up to 30% compared to traditional PWM controllers. Designed with dual bank output, it effortlessly charges and maintains both house and starter batteries, ensuring optimal performance and longevity. Whether you're navigating open waters or docked at your favorite marina, this MPPT charge controller is your key to efficient and reliable solar power management.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUtilizes advanced MPPT technology for up to 30% more power than PWM controllers\u003c\/li\u003e \u003cli\u003eDual-battery bank charging for simultaneous maintenance of house and starter batteries\u003c\/li\u003e \u003cli\u003eSupports a wide range of battery types, including LiFePO4, AGM, Gel, and Flooded\u003c\/li\u003e \u003cli\u003eCapable of handling higher voltage PV arrays up to 72V (nominal)\u003c\/li\u003e \u003cli\u003eEquipped with best-in-class protections for both PV array and batteries\u003c\/li\u003e \u003cli\u003eBacked by a 5-year warranty, ensuring peace of mind and reliability\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eOptimized Charging for Marine Adventures\u003c\/h4\u003e \u003cp\u003eThe Xantrex 30A MPPT Charge Controller is engineered for the demands of marine solar systems, offering unparalleled flexibility in PV array designs. Its capability to work with higher voltage arrays means you can optimize your solar setup for maximum efficiency and power output. Dual-bank charging allows for the maintenance of both your house and starter batteries, ensuring that you're always powered up and ready to go. With advanced MPPT technology, you're guaranteed more power and a faster charging process, making every journey on the water as efficient as it is enjoyable.\u003c\/p\u003e \u003ch4\u003eAdvanced Protection and Ease of Use\u003c\/h4\u003e \u003cp\u003eWith the Xantrex 30A MPPT Charge Controller, your solar system is safeguarded by the best-in-class protections against overcharging, short-circuiting, and reverse polarity. Its built-in LCD display offers real-time system data, allowing for easy monitoring and adjustments. The optional remote battery temperature sensor and remote panel enhance flexibility and convenience, providing a comprehensive solar power management solution that's as reliable as it is efficient.\u003c\/p\u003e \u003c!-- Variations List Section is omitted as no variations were provided --\u003e \u003ch4\u003eSeamless Integration with Xantrex Solar Panels\u003c\/h4\u003e \u003cp\u003eFor optimal performance, pair the Xantrex 30A MPPT Charge Controller with Xantrex Solar Panels. Compatible with all types and makes of solar panels, this charge controller is a versatile addition to any marine solar power system. Its advanced MPPT technology and dual-bank charging capabilities make it the ideal choice for sailors looking to enhance their energy independence on the water. Experience the difference in power, efficiency, and reliability with Xantrex's cutting-edge solar technology.\u003c\/p\u003e","brand":"Xantrex","offers":[{"title":"Default Title","offer_id":52023460233397,"sku":"QBP294011","price":346.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1217464_qbp294011.jpg?v=1763254956"},{"product_id":"qbp730324","title":"ProMariner - ProTechOne Battery Charger - Maintainer, With Integrated AC Inlet, Corded","description":"\u003ch4\u003eEfficient Power Management with ProTechOne AC Inlet\u003c\/h4\u003e \u003cp\u003e\u003cstrong\u003eProTechOne - 4 AMP - AC Inlet\u003c\/strong\u003e represents a leap forward in battery maintenance technology, combining advanced microprocessor control with ProMariner's renowned charging efficiency. Ideal for both short and long-term storage, this system not only charges but conditions and maintains your batteries, ensuring peak performance and extended life. Engineered for the elements, its weatherproof design makes it perfect for outdoor applications, offering years of reliable service.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUtilizes cutting-edge all-digital charging technology for efficient multi-stage charging.\u003c\/li\u003e \u003cli\u003eAutomatic monitoring and adjusting charge rates to prevent overcharging and extend battery life.\u003c\/li\u003e \u003cli\u003eFeatures a push-to-test battery status indicator for real-time power monitoring.\u003c\/li\u003e \u003cli\u003eWaterproof DC safety fuse ensures maximum protection for DC wiring.\u003c\/li\u003e \u003cli\u003eIgnition protected and FCC Class A certified for minimal electromagnetic interference.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eUnmatched Durability for Outdoor Use\u003c\/h4\u003e \u003cp\u003eDesigned with a gasket molded case for outdoor use and commercial-grade jacketed AC and DC cables, ProTechOne is built to withstand harsh marine environments while providing reliable charging and maintenance for your batteries.\u003c\/p\u003e \u003ch4\u003eSmart Charging for Optimal Battery Health\u003c\/h4\u003e \u003cp\u003eThe ProTechOne charger incorporates an intuitive LED dashboard, offering quick access to AC power status, charging mode, and auto maintain mode. This intelligent system reduces operational costs by minimizing AC consumption when batteries are fully charged.\u003c\/p\u003e \u003ch4\u003eVersatile Charging Solutions\u003c\/h4\u003e \u003cp\u003eProTechOne's range offers solutions tailored to your specific needs:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e24104 4 Amp \/ AC Inlet - Seamless integration for direct AC inlet charging.\u003c\/li\u003e \u003cli\u003e25104 4 Amp \/ Corded - Flexibility with a corded connection.\u003c\/li\u003e \u003cli\u003e24105 5 Amp \/ AC Inlet - Higher amperage for quicker charging via AC inlet.\u003c\/li\u003e \u003cli\u003e25105 5 Amp \/ Corded - The convenience of a corded connection with increased amperage.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eEquip your marine setup with \u003cstrong\u003eProTechOne\u003c\/strong\u003e for state-of-the-art battery charging and maintenance, ensuring your batteries are always ready when you are.\u003c\/p\u003e","brand":"ProMariner","offers":[{"title":"4 Amp \/ AC Inlet","offer_id":52023484154037,"sku":"QBP730324-V1","price":122.99,"currency_code":"USD","in_stock":false},{"title":"5 Amp \/ AC Inlet","offer_id":52023484186805,"sku":"QBP730324-V4","price":120.99,"currency_code":"USD","in_stock":false},{"title":"4 Amp \/ Corded","offer_id":52023484219573,"sku":"QBP730324-V5","price":100.99,"currency_code":"USD","in_stock":false},{"title":"5 Amp \/ Corded","offer_id":52023484252341,"sku":"QBP730324-V9","price":130.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1218429_qbp730324.jpg?v=1763255198"},{"product_id":"qbp146563","title":"Victron Energy BlueSolar PWM DUO Solar Charge Controller, 12\/24V, 20A, LCD, USB, Dual Battery","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SCC010020060 is a BlueSolar PWM DUO LCD and USB solar charge controller for 12\/24V battery systems with a 20A rated charge current. It suits small solar charging setups where one panel array needs to maintain two separate battery banks, such as a starter battery and a house or service battery on a boat.\u003c\/p\u003e\u003cp\u003eThe controller uses PWM charging with programmable bulk, absorption and float stages, and the LCD gives status monitoring and setup access from the unit. Automatic system voltage detection supports 12V and 24V operation for lead-acid battery systems, while LiFePO4 charging is supported for batteries that have an internal BMS.\u003c\/p\u003e\u003cp\u003eTwo 5V USB outputs provide up to 2A combined for charging small USB devices, and the common negative layout helps with integration into many low-voltage DC installations. The enclosure is IP20, so it belongs in a dry, protected location rather than an exposed cockpit, deck locker, or wet engine space.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12\/24V PWM solar charge controller with a 20A rated charge current.\u003c\/li\u003e\n\u003cli\u003eTwo separate battery outputs for charging a starter battery and a service or house battery from one controller.\u003c\/li\u003e\n\u003cli\u003eProgrammable charge current ratio for adjusting how charging is shared between the two battery outputs.\u003c\/li\u003e\n\u003cli\u003eProgrammable three-stage charging with bulk, absorption, and float stages.\u003c\/li\u003e\n\u003cli\u003eBattery algorithms for AGM, GEL, flooded lead-acid, and LiFePO4 batteries with an internal BMS.\u003c\/li\u003e\n\u003cli\u003eLCD display for system status monitoring and controller setup.\u003c\/li\u003e\n\u003cli\u003eTwo 5V USB ports with up to 2A combined output for USB device charging.\u003c\/li\u003e\n\u003cli\u003eProgrammable lighting control and load disconnect functions for small DC load management.\u003c\/li\u003e\n\u003cli\u003eProtection against reverse polarity connection of the solar panels or battery, plus over-temperature protection.\u003c\/li\u003e\n\u003cli\u003eRemote battery temperature sensor included for temperature-compensated charging.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe unit measures 101.5 x 184.0 x 47.1 mm and weighs 0.3 kg, so it can fit on a compact electrical panel while still leaving room to view the LCD and access the terminals. Its IP20 enclosure is not sealed against spray or washdown, which makes a dry cabin, electrical locker, or sheltered equipment panel the better mounting location.\u003c\/p\u003e\u003cp\u003eThe terminals accept up to 16 mm² or AWG6 conductors. Cable size, fuse placement, and battery isolation should be matched to the vessel's DC system and the controller's 20A charge rating.\u003c\/p\u003e\u003ch6\u003eSolar and battery compatibility\u003c\/h6\u003e\u003cp\u003eFor a 12V battery system, use 36-cell solar panels. For a 24V battery system, use a 72-cell panel or two 36-cell panels in series. Maximum solar voltage is 28V on 12V systems and 55V on 24V systems, so the panel array voltage should be checked before connection.\u003c\/p\u003e\u003cp\u003eThe controller supports AGM, GEL, flooded lead-acid, and LiFePO4 batteries with an internal BMS. Automatic 12\/24V detection applies to standard 12V and 24V operation, but LiFePO4 setups require the correct voltage setting rather than relying on automatic detection.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis controller is a practical fit for boats using solar to maintain both starting and house batteries while moored, anchored, or between trips. The dual battery outputs are useful where the engine start battery needs maintenance charging without giving up solar support for cabin lighting, instruments, pumps, or other house-bank loads.\u003c\/p\u003e\u003cp\u003eThe USB outputs can handle simple device charging at the controller, which is useful in a cabin, nav-station area, or sheltered equipment space. For exposed helm or deck installations, use a separate marine-rated USB outlet in a weather-protected circuit instead of relying on the controller enclosure for splash protection.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBlueSolar PWM DUO LCD and USB 12\/24V 20A charge controller\u003c\/li\u003e\n\u003cli\u003eRemote battery temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52023489429685,"sku":"QBP146563","price":80.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332215_qbp146563.jpg?v=1780191825"},{"product_id":"qbp587987","title":"Victron Energy MPPT Control Display, VE.Direct Port, Flush Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SCC900500000 is an MPPT Control display for reading and configuring Victron BlueSolar and SmartSolar MPPT solar charge controllers through VE.Direct. It gives a fixed panel readout for solar watts, PV voltage and current, battery voltage, charge current, charge stage, daily yield, 30-day history, and cumulative history, so the boat’s solar charging status can be checked without opening an app or connecting a laptop.\u003c\/p\u003e\u003cp\u003eThe display is made for flush mounting and uses the familiar BMV-700 style housing, with a 69 x 69 mm front bezel, 52 mm body diameter, 31 mm body depth, and 50 g weight. It is powered through the VE.Direct connection at 5Vdc in normal installations, or from the supplied fused power cable on certain early controller models, with a battery-powered range of 6.5 to 95Vdc.\u003c\/p\u003e\u003cp\u003eFor marine electrical panels, nav stations, and protected helm locations, this unit is useful when solar charging needs to be visible at a glance during coastal cruising, fishing days, or time at anchor. It is a display and control interface, not a solar charger by itself, so it should be paired with a compatible Victron MPPT controller.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eShows live solar charger data, including PV power, PV voltage, PV current, battery voltage, battery current, and charge stage.\u003c\/li\u003e\n\u003cli\u003eDisplays 30-day history and cumulative solar charger values for tracking charging performance over time.\u003c\/li\u003e\n\u003cli\u003eAllows setup of compatible Victron MPPT solar charger settings directly from the panel display.\u003c\/li\u003e\n\u003cli\u003eConnects to the solar charger by VE.Direct for a clean link between the display and controller.\u003c\/li\u003e\n\u003cli\u003eFlush-mount format suits electrical panels, cabin control panels, and protected helm dashboards.\u003c\/li\u003e\n\u003cli\u003eLow power draw of less than 0.05W with the backlight turned off helps keep monitoring loads small.\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -20 to +50°C supports normal cabin and panel locations on board.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe MPPT Control display works with the Victron Energy BlueSolar MPPT and SmartSolar MPPT solar charger range, except for the discontinued BlueSolar MPPT 70\/15. The solar charger must have the VE.Direct connection used by this display.\u003c\/p\u003e\u003cp\u003eIt is a sensible fit for boats where the solar controller is hidden in a locker, electrical compartment, or technical space, but the charging information needs to be visible near the main DC panel or nav area. It keeps the solar readout in a fixed location, which is helpful when more than one person may need to check battery charging status during a trip.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe display connects to the solar charger with a VE.Direct cable. That cable is not included and should be selected separately in the correct length and connector style for the installation. The VE.Direct cable should not be extended, and the total cable length must not exceed 10 m.\u003c\/p\u003e\u003cp\u003eIn most current installations, the display is powered through the VE.Direct cable. The supplied fused power cable is only needed with certain very early solar charger models that shut down when solar input is not available, allowing the display to stay powered from the battery when the sun is down or solar input is low.\u003c\/p\u003e\u003cp\u003eThe front bezel measures 69 x 69 mm, while the body diameter is 52 mm and the body depth is 31 mm. These dimensions are important when checking clearance behind a switch panel, console insert, or nav station face before cutting the mounting hole.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMPPT Control display\u003c\/li\u003e\n\u003cli\u003eFused power cable, 1.5 m\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52023526424757,"sku":"QBP587987","price":51.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332295_qbp587987.jpg?v=1780191855"},{"product_id":"qbp632795","title":"Victron Energy SmartSolar Control Display, For SmartSolar Charge Controllers, Pluggable LCD","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SCC900650010 is a SmartSolar Control pluggable LCD display for compatible Victron MPPT solar charge controllers with a front display port. It gives a direct view of charging information at the controller, which is useful on boats where the solar charger is mounted in an electrical locker, cabin panel, lazarette, or other service area and a quick local check is easier than opening an app.\u003c\/p\u003e\u003cp\u003eThis display inserts into the display port on the front of the solar charger and is suitable for Victron Energy 150V and 250V BlueSolar and SmartSolar MPPT solar chargers that are equipped with that display port. The unit measures 116 mm x 50 mm x 25 mm and weighs 66 g, so it adds a small local interface without changing the basic charger installation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePluggable LCD display for Victron SmartSolar charge controllers and compatible BlueSolar and SmartSolar MPPT chargers with a display port.\u003c\/li\u003e\n\u003cli\u003eFits into the front display terminal on the solar charger after the protective display-option cover is removed.\u003c\/li\u003e\n\u003cli\u003eShows live solar charger readings including battery voltage, charge current, PV voltage, PV current, PV power, charge stage, warnings, and errors.\u003c\/li\u003e\n\u003cli\u003eDisplays readings in common system units such as V, A, W, kWh, h, and temperature, making status checks easier during onboard power management.\u003c\/li\u003e\n\u003cli\u003eProvides access to status, history, and setup menus using the front buttons on the display.\u003c\/li\u003e\n\u003cli\u003eCan be plugged in or removed while the solar charger is operating, which is useful when it is used as a temporary service display.\u003c\/li\u003e\n\u003cli\u003eUses an RS232 9-pin display port connection and mounts directly to the charger face rather than working as a remote panel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe display connects directly to the display terminal on the front of the solar charger. Installation involves removing the two screws from the plastic display-option cover, taking off the cover, removing the plastic plugs beside the display plug, peeling the backing from the tape on the display, inserting the display fully into the connector, and securing it with the cover screws.\u003c\/p\u003e\u003cp\u003eBecause the display sits on the charger itself, the solar controller should be installed where the screen can be seen and the buttons can be reached. For marine systems, that usually means a dry electrical area with enough clearance around the charger for cooling, wiring service, and routine inspection.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis display is for Victron 150V and 250V BlueSolar and SmartSolar MPPT solar chargers that include the front display port. It is not a universal battery monitor, remote display, or NMEA display, and it should not be selected for chargers that do not have the required display-option connection on the front of the unit.\u003c\/p\u003e\u003cp\u003eFor a boat owner or installer, the key fit check is the charger face. If the controller has the removable plastic cover marked for the display option, this display gives a clean local interface for checking solar production, battery charging behavior, and fault messages during commissioning or day-to-day use.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eOn a cruising sailboat, fishing boat, or off-grid marine power setup, this display is a practical match for systems where solar charging is part of the house battery routine. It helps confirm whether the array is producing power, what charge stage the controller is in, and whether the charger is reporting a warning or error.\u003c\/p\u003e\u003cp\u003eIt is especially helpful when the charge controller is easy to access but the owner still wants a built-in readout at the equipment location. For installations that need monitoring from another cabin, helm, or nav station, a separate remote monitoring approach should be considered instead.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52023526457525,"sku":"QBP632795","price":32.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332299_qbp632795.jpg?v=1780191855"},{"product_id":"qbp226256","title":"Victron Energy Battery Balancer, For 24V Systems, 0.7A Balancing Current","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy BBA000100100 is a Battery Balancer for two 12V batteries connected in series, or for several parallel strings of series-connected 12V batteries in a larger bank. It helps keep the two battery halves at the same state of charge, which matters on boats with 24V DC systems where one battery can otherwise end up working harder than the other during charging and use.\u003c\/p\u003e\u003cp\u003eWhen the charge voltage of a 24V battery system rises above 27.3V, the unit turns on and compares the voltage across the two batteries. Balancing starts from a 50 mV midpoint deviation, with up to 0.7A of balancing current when the deviation is above 100 mV. For 48V banks, three Battery Balancers can be used across the series-connected batteries.\u003c\/p\u003e\u003cp\u003eThe housing is rated IP22, so it belongs in a dry, protected electrical space rather than an exposed cockpit, wet bilge, or washdown area. Its compact 100 x 113 x 47 mm size makes it practical for mounting near a house battery bank, equipment locker, or DC distribution area where the wiring can stay short and service access remains clear.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBalances two series-connected 12V batteries in a 24V bank, or parallel strings of series-connected batteries.\u003c\/li\u003e\n\u003cli\u003eTurns on during charging when system voltage rises above 27.3V and begins balancing from a 50 mV midpoint deviation.\u003c\/li\u003e\n\u003cli\u003eDraws up to 0.7A from the higher-voltage battery side to help the bank return toward an even state of charge.\u003c\/li\u003e\n\u003cli\u003eSupports 48V battery banks when three Battery Balancers are installed across the series-connected batteries.\u003c\/li\u003e\n\u003cli\u003eLED status indicators show power, upper or lower battery leg balancing activity, and alarm condition.\u003c\/li\u003e\n\u003cli\u003eNormally open 60V \/ 1A alarm relay can be tied into a remote alert or monitoring circuit.\u003c\/li\u003e\n\u003cli\u003eScrew terminals accept up to 6 mm² \/ AWG10 conductors, with separate terminals available for alarm reset.\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -30°C to +50°C suits protected marine electrical spaces that see seasonal temperature swings.\u003c\/li\u003e\n\u003cli\u003eIP22 enclosure is suitable for dry mounting locations where the unit is protected from spray and direct water exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the balancer on a well-ventilated vertical surface close to the batteries, but not directly above them where corrosive battery gases may rise. On a boat, a protected battery compartment wall or nearby electrical panel backing board is usually a better location than the top of the battery box.\u003c\/p\u003e\u003cp\u003eFor the main negative, positive, and midpoint connections, use at least 0.75 mm² wiring and keep the runs neat, supported, and protected from chafe. In installations that need UL compliance, each of these wires should be fused near the batteries with a 10A fuse suitable for DC current.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe Battery Balancer is most useful on 24V and 48V battery banks built from 12V batteries in series. It is not a solar charge controller and does not replace correct charging settings, proper battery matching, or routine battery maintenance. Its job is to manage midpoint imbalance while the bank is charging.\u003c\/p\u003e\u003cp\u003eThe alarm relay closes when the midpoint deviation reaches the alarm level, giving installers a clean way to add a remote warning light, buzzer, or monitoring input. The relay resets once the deviation drops back within range, and a separate push-button reset can be wired to the reset terminals when a manual reset point is useful at the DC panel.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis unit is a good match for boats running a 24V house bank, inverter bank, or other series-connected battery setup where long battery life depends on keeping the two sides of the bank balanced. It is especially relevant for vessels that spend time on shore power, solar charging, alternator charging, or generator charging where repeated charge cycles can expose small differences between batteries.\u003c\/p\u003e\u003cp\u003eFor cruising boats, workboats, and fishing boats with higher-capacity DC systems, the balancer gives a simple way to reduce uneven charging stress without adding a complex control interface. It works quietly in the background once installed and gives clear LED feedback when balancing or alarm conditions occur.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the unit dry, clean, and accessible for inspection. During routine battery checks, confirm that the terminals remain tight, wiring is supported, and the enclosure has not been exposed to water, salt residue, or corrosive fumes.\u003c\/p\u003e\u003cp\u003eIf an alarm appears on a new battery bank, the batteries may have started with different states of charge and may need to be charged individually before the system is put back into normal service. On an older bank, repeated alarms can point to undercharging, cell problems, or batteries that no longer age evenly.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52023557161141,"sku":"QBP226256","price":48.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332244_qbp226256.jpg?v=1780191868"},{"product_id":"qbp740152","title":"Victron Energy VE.Bus BMS Battery Management System, For Victron LiFePO4 Batteries, 12-48VDC","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy BMS300200000 is a VE.Bus battery management system for Victron LiFePO4 and LFP battery banks on 12V, 24V and 48V DC marine power systems. It operates across a 9 to 70V DC input range and protects individual lithium cells against over-voltage, under-voltage and over-temperature conditions.\u003c\/p\u003e\u003cp\u003eThis unit is used with Victron lithium batteries that have integrated Balancing, Temperature and Voltage control, often referred to as BTV. The BTV connections from multiple batteries can be daisy-chained, allowing the BMS to supervise the battery bank and send control signals when the bank needs loads reduced, charging limited or chargers disconnected.\u003c\/p\u003e\u003cp\u003eFor boats using VE.Bus equipment, the BMS links to MultiPlus, Quattro or Phoenix inverter products through a standard RJ45 UTP cable. It also gives installers Load Disconnect, Charge Disconnect and Pre-alarm outputs for controlling supporting equipment in a safer lithium setup.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eProtects each individual cell in a Victron LiFePO4 or LFP battery against over-voltage, under-voltage and over-temperature conditions.\u003c\/li\u003e\n\u003cli\u003eWorks in 12V, 24V and 48V DC systems, with a BMS input voltage range of 9 to 70V DC.\u003c\/li\u003e\n\u003cli\u003eConnects to MultiPlus, Quattro or Phoenix inverter products through a standard RJ45 UTP VE.Bus cable.\u003c\/li\u003e\n\u003cli\u003eUses Load Disconnect, Charge Disconnect and Pre-alarm outputs to manage loads, chargers and warning devices during battery fault conditions.\u003c\/li\u003e\n\u003cli\u003eSupports daisy-chained BTV battery connections for multi-battery Victron LiFePO4 banks.\u003c\/li\u003e\n\u003cli\u003eLoad Disconnect output has a 2A source current limit, while the Charge Disconnect output has a 10mA source current limit.\u003c\/li\u003e\n\u003cli\u003ePre-alarm output can trigger a warning before load disconnect, with a minimum 30 second delay between pre-alarm and load disconnect.\u003c\/li\u003e\n\u003cli\u003eIP20 housing for installation inside a protected electrical area, with an operating temperature range from -20°C to +50°C.\u003c\/li\u003e\n\u003cli\u003eABS enclosure measures 105 x 78 x 32 mm and weighs about 0.1 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe VE.Bus BMS is for Victron LiFePO4 battery systems that use BTV connections. It is not a generic drop-in BMS for unrelated lithium batteries, so the battery type and Victron BTV cabling should be confirmed before installation.\u003c\/p\u003e\u003cp\u003eThe battery BTV leads can be daisy-chained across several batteries. The system supports arrangements with up to five batteries in parallel and up to four batteries in series, which covers typical 12V, 24V and 48V house-bank layouts when the battery bank is configured within the proper lithium system limits.\u003c\/p\u003e\u003cp\u003eVE.Bus communication is handled through two RJ45 sockets, making the unit a natural fit for boats with Victron inverter or inverter\/charger equipment already in the electrical system. Non-VE.Bus loads and charge sources can be controlled through the appropriate disconnect terminals rather than through VE.Bus communication.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount this BMS in a dry and protected electrical space, such as an electronics locker, battery control area or distribution panel compartment. The IP20 protection grade and 95% maximum non-condensing humidity rating mean it should not be installed where it can be exposed to deck wash, bilge splash or dripping water.\u003c\/p\u003e\u003cp\u003eThe Load Disconnect output is normally high and becomes free-floating when cell under-voltage is imminent. The Charge Disconnect output is normally high and becomes free-floating when cell over-voltage or over-temperature is detected. The Pre-alarm output is normally free-floating and becomes high during an imminent cell under-voltage alarm, allowing a light, buzzer or relay to warn the crew before loads are disconnected.\u003c\/p\u003e\u003cp\u003eKeep the BTV, RJ45 UTP and disconnect wiring accessible and well supported. On a boat, clean routing and strain relief matter because battery spaces and electrical lockers see movement, service work and seasonal maintenance.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis BMS is a practical match for cruising boats, fishing boats and sailboats using Victron lithium batteries with a VE.Bus inverter or inverter\/charger. It helps coordinate the lithium bank with onboard DC loads, AC inverter loads and charge sources so the system reacts before the cells move outside their safe operating range.\u003c\/p\u003e\u003cp\u003eThe unit does not carry the main battery current itself. It belongs in a properly planned lithium installation with suitable fusing, cabling, load control and charger control hardware, so the BMS commands the system while the power equipment handles the actual current.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52023557324981,"sku":"QBP740152","price":117.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332246_qbp740152.jpg?v=1780191869"},{"product_id":"qbp551015","title":"Ocean LED - OceanBridge Control Unit","description":"\u003ch4\u003eIlluminate the Seas with OceanLED OceanBridge Control Unit\u003c\/h4\u003e \u003cp\u003eIntroducing the \u003cstrong\u003eOceanLED OceanBridge Control Unit\u003c\/strong\u003e, a revolutionary lighting controller designed to elevate the ambiance of any vessel. The OceanBridge brings unparalleled control over your boat's lighting directly to your fingertips, whether through a multifunction display (MFD), smartphone, or tablet. Compatible with the entire OceanLED range, as well as most third-party DC-powered lights, this system allows for the customization of lighting colors, patterns, and more, ensuring a unique and captivating marine environment.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eComprehensive control over color change, music sync, brightness, and more for a personalized lighting experience.\u003c\/li\u003e \u003cli\u003eCreate up to 10 lighting zones and scenes for dynamic lighting effects across different areas of your vessel.\u003c\/li\u003e \u003cli\u003eUniversal compatibility with all major MFD units and most third-party DC-powered lights for seamless integration.\u003c\/li\u003e \u003cli\u003eExpandable system capable of managing up to 64 lights, with potential expansion to over 150 lights.\u003c\/li\u003e \u003cli\u003eIntelligent audio sync and movement-to-color functionality for lights that react to your environment and activities.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eAdvanced Features for Ultimate Customization\u003c\/h4\u003e \u003cp\u003eThe OceanBridge's intelligent design includes a built-in gyroscope, enabling the lights to change with the boat’s movement, creating a dynamic and immersive experience. Its timer function allows for the automation of specific lighting scenes, ensuring your vessel is always showcased in the best light, while the expandable system supports an extensive range of lights for comprehensive coverage.\u003c\/p\u003e \u003ch4\u003eSeamless Operation for Effortless Control\u003c\/h4\u003e \u003cp\u003eControl your lighting easily via MFD or the integrated Wi-Fi module for control via smartphone or tablet, offering flexibility and convenience. The OceanBridge's touch-sensitive interface provides intuitive control, allowing for the quick and easy customization of your vessel's lighting ambiance. With its robust construction and IP66 water protection rating, the OceanBridge Control Unit is designed to withstand the rigors of marine environments, ensuring reliable performance wherever your journey takes you.\u003c\/p\u003e \u003cp\u003eEmbrace the future of marine lighting with the OceanLED OceanBridge Control Unit, where technology and innovation meet to transform your boating experience into something truly extraordinary.\u003c\/p\u003e","brand":"Ocean LED","offers":[{"title":"Default Title","offer_id":52023608377525,"sku":"QBP551015","price":475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1221841_qbp551015.jpg?v=1763256500"},{"product_id":"qbp296726","title":"Victron Energy SmartSolar MPPT 150\/100-MC4 VE.Can Solar Charge Controller, 12\/24\/36\/48V, 100A, Bluetooth","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SCC115110511 is a SmartSolar MPPT 150\/100-MC4 VE.Can solar charge controller for larger onboard solar arrays feeding 12, 24, 36, or 48 V battery banks. It supports up to 100 A of charge current and accepts PV input up to 150 V open circuit, giving boat owners room to build a serious solar system for cruising, fishing, or long periods away from shore power.\u003c\/p\u003e\u003cp\u003eThis controller uses MPPT charging to track changing solar conditions, which matters on a boat where sails, antennas, hardtops, rails, and passing cloud can shade panels during the day. The MC4 version uses PV plug connectors for the solar side, while VE.Can lets multiple controllers work together in larger Victron systems.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth allows setup and monitoring through VictronConnect, and the unit also includes VE.Direct, remote on-off, and a programmable relay for more advanced system integration. It can also recover a deeply discharged battery when the cells are still serviceable.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e100 A maximum charge current for high-output solar charging on larger house battery banks.\u003c\/li\u003e\n\u003cli\u003e150 V PV input rating, with a 145 V start-up and operating maximum for array planning.\u003c\/li\u003e\n\u003cli\u003eWorks with 12, 24, 36, and 48 V battery systems, with 36 V selected manually.\u003c\/li\u003e\n\u003cli\u003eNominal PV capacity reaches 1450 W at 12 V, 2900 W at 24 V, 4350 W at 36 V, and 5800 W at 48 V.\u003c\/li\u003e\n\u003cli\u003eThree pairs of MC4 PV connectors help simplify solar panel string connections at the controller.\u003c\/li\u003e\n\u003cli\u003eVE.Can communication supports synchronized operation with up to 25 controllers in larger systems.\u003c\/li\u003e\n\u003cli\u003eBluetooth and VictronConnect support local setup, monitoring, charging profile changes, and firmware updates.\u003c\/li\u003e\n\u003cli\u003eProtection covers PV reverse polarity, output short circuit, and over-temperature conditions.\u003c\/li\u003e\n\u003cli\u003eIP43 protection for electronic components and IP22 protection at the connection area.\u003c\/li\u003e\n\u003cli\u003eMulti-stage adaptive charging with eight pre-programmed algorithms or a user-defined charge profile.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis SmartSolar controller belongs in a dry, ventilated electrical space such as a nav station locker, technical compartment, lazarette electrical panel, or protected equipment area. It should not be treated as a deck-mounted or washdown-facing component, because the connection area is rated IP22 and needs protection from spray, bilge water, and direct weather.\u003c\/p\u003e\u003cp\u003eThe MC4 solar inputs are useful when the array wiring already terminates in MC4 connectors, but the installation still needs correctly sized DC cabling, fusing, and isolation on both the PV and battery sides. The battery terminals accept heavy conductors up to 35 mm² or AWG 2, which is important for managing voltage drop at 100 A charge levels.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe controller can operate as a single charger or as part of a larger Victron energy system. VE.Can is the better fit when several MPPT controllers need to report through one communication path or charge in sync, while VE.Direct gives another option for local device communication.\u003c\/p\u003e\u003cp\u003eFor battery charging, the adaptive algorithm moves through bulk, absorption, and float stages, with settings that can be matched to common lead-acid and lithium battery setups. Optional external voltage and temperature sensing can improve charging accuracy when the batteries are located away from the controller or when cable runs create measurable voltage drop.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis model fits boats with a meaningful solar array, such as cruising sailboats, trawlers, expedition-style fishing boats, and liveaboard systems where solar charging supports refrigeration, electronics, lighting, pumps, and inverter loads. It is also a strong match for vessels already built around Victron monitoring, GX devices, or multiple charge sources.\u003c\/p\u003e\u003cp\u003eOn boats with split panel locations, changing shade, or plans to expand the solar system later, the VE.Can and synchronized charging capability help keep the electrical system organized without turning the solar setup into a collection of isolated chargers.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the controller and its terminals dry, clean, and accessible for inspection. During routine electrical checks, confirm that PV connectors are fully seated, battery cables remain tight, ventilation is not blocked, and no corrosion or heat discoloration is visible around the connection area.\u003c\/p\u003e\u003cp\u003eAfter installation, periodic checks through VictronConnect are useful for reviewing daily yield, charge stage behavior, battery voltage, and any logged errors before they become problems during a passage or time away from the dock.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52024133058741,"sku":"QBP296726","price":553.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332312_qbp296726.jpg?v=1780192110"},{"product_id":"qbp670432","title":"Victron Energy Lynx Smart BMS Battery Management System, For Lithium Smart Batteries, Bluetooth, GX Monitoring","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy Lynx Smart BMS is a battery management system for Victron Lithium Battery Smart batteries, built for high-current DC systems using the modular Lynx distribution platform. It supports 12, 24 and 48 V battery systems, has a 9-60 VDC battery voltage range, and is offered in 500 A and 1000 A versions so the installation can be matched to the vessel’s DC load profile.\u003c\/p\u003e\u003cp\u003eOn board, this unit sits at the center of the lithium battery system rather than acting as a standard solar charge controller. It combines battery protection, a main safety contactor, battery monitoring, pre-charge for inverter loads, and communication with Victron monitoring equipment. That makes it relevant for cruising boats, fishing vessels, and larger onboard power systems where lithium batteries feed inverter\/chargers, DC loads, alternator charging, and solar charging through a managed Victron ecosystem.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDedicated BMS for Victron Lithium Battery Smart batteries, with support for systems built around 12, 24 or 48 V architecture.\u003c\/li\u003e\n\u003cli\u003eAvailable with 500 A or 1000 A current ratings to suit different high-current DC installations.\u003c\/li\u003e\n\u003cli\u003eBuilt-in safety contactor can protect the battery system and also act as a remote controllable main system switch.\u003c\/li\u003e\n\u003cli\u003eIntegrated battery monitor reports state of charge, voltage, current, status information, history, and alarms through compatible Victron monitoring tools.\u003c\/li\u003e\n\u003cli\u003eBuilt-in pre-charge circuit helps limit inrush current when connecting capacitive loads such as inverter\/chargers.\u003c\/li\u003e\n\u003cli\u003eBluetooth connection allows setup and monitoring through the VictronConnect app.\u003c\/li\u003e\n\u003cli\u003eVE.Can connection links the BMS to a GX device for local display, VRM remote monitoring, and wider Victron system control.\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 integration is available through VE.Can with the proper VE.Can to NMEA 2000 micro-C cable, useful when battery data needs to reach a marine network or MFD.\u003c\/li\u003e\n\u003cli\u003eATC and ATD contacts can control compatible chargers and loads that use a remote on\/off input.\u003c\/li\u003e\n\u003cli\u003eDVCC closed loop control works with compatible Victron inverter\/chargers and MPPT solar chargers through a connected GX device.\u003c\/li\u003e\n\u003cli\u003eAUX output supplies up to 1.1 A at system voltage for selected equipment such as a GX device after load shutdown events.\u003c\/li\u003e\n\u003cli\u003eMonitors fuse status for up to 4 connected Lynx Distributor modules when used with compatible Lynx Distributor hardware.\u003c\/li\u003e\n\u003cli\u003eABS enclosure, tinned copper busbars, and an operating temperature range of -40 °C to +60 °C support use inside protected marine electrical spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe Lynx Smart BMS range is offered in multiple configurations so the main DC rating and busbar hardware can match the vessel’s lithium bank and cable lug setup.\u003c\/p\u003e\u003cp\u003eThe current rating and busbar connection size are the key differences between these variants. The product role remains the same across the range: lithium battery management, contactor-based protection, battery monitoring, pre-charge, VictronConnect setup, GX device integration, and Lynx distribution system support.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLYN034160200: 500 A current rating with M8 busbar connections. This version fits a 500 A Lynx Smart BMS installation where the DC cable lugs and existing busbar hardware are based on M8 connections.\u003c\/li\u003e\n\u003cli\u003eLYN034160210: 500 A current rating with M10 busbar connections. This version keeps the 500 A rating while using M10 busbar hardware for installations standardized around larger Lynx connection points.\u003c\/li\u003e\n\u003cli\u003eLYN034170210: 1000 A current rating with M10 busbar connections. This version is the higher-current option for larger DC systems that need the 1000 A Lynx Smart BMS platform and M10 connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eThis BMS is for Victron Lithium Battery Smart batteries, not a universal lithium BMS for mixed third-party battery banks. It can manage banks made from compatible 12.8 V or 25.6 V batteries in series, parallel, or series and parallel layouts, with up to 20 batteries in one system.\u003c\/p\u003e\u003cp\u003eFor a full Victron marine power system, the Lynx Smart BMS works naturally alongside Lynx Distributor modules, a GX device such as a Cerbo GX or Ekrano GX, compatible inverter\/chargers, compatible MPPT solar chargers, and VictronConnect. In this type of installation, the BMS can help coordinate charge and discharge control instead of leaving every charging source to operate independently.\u003c\/p\u003e\u003ch6\u003eInstallation and mounting\u003c\/h6\u003e\u003cp\u003eInstall the unit in an electrical space that stays dry and protected, such as a DC distribution locker or a service area near the battery bank. Its IP22 protection class is intended for sheltered locations, so it should not be mounted where it will be exposed to salt spray, washdowns, or standing bilge moisture.\u003c\/p\u003e\u003cp\u003ePlan cable sizing, fusing, lug size, and busbar torque around the selected variant. The busbar material is tinned copper, and the M10 models use 33 Nm torque on the busbar connections, with a lower torque requirement applying only to earlier 1000 A units with specific serial numbers.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis product is a strong fit for boats moving from lead-acid to Victron lithium house banks, especially when the DC system includes inverter\/charger loads, solar charging, alternator charging control, and remote monitoring. It is also well suited to vessels where battery status needs to be visible at the helm, on a GX display, or through remote monitoring while away from the boat.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"500 A \/ M8","offer_id":52581864702133,"sku":"QBP670432-V1","price":906.95,"currency_code":"USD","in_stock":true},{"title":"500 A \/ M10","offer_id":52581864734901,"sku":"QBP670432-V2","price":1003.18,"currency_code":"USD","in_stock":true},{"title":"1000 A \/ M10","offer_id":52581864767669,"sku":"QBP670432-V3","price":1249.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1336208_qbp670432.webp?v=1780200865"},{"product_id":"qbp563865","title":"Victron Energy SmartSolar MPPT 250\/100-Tr Solar Charge Controller, 100A, 250V, VE.Can","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SCC125110412 is a SmartSolar MPPT 250\/100-Tr VE.Can solar charge controller for 12 V, 24 V, and 48 V battery banks, with 36 V selection available manually. It delivers up to 100 A charging current and accepts high-voltage solar arrays with a 250 V absolute PV open-circuit limit under cold conditions.\u003c\/p\u003e\u003cp\u003eOn a boat, this unit fits larger house-bank solar systems where changing light is part of daily use. The MPPT tracking helps the controller keep harvesting when clouds pass, sails or other moving objects shade the panels, and the VE.Can connection lets multiple controllers work together in a larger Victron system.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e100 A rated charge current for larger marine solar charging systems.\u003c\/li\u003e\n\u003cli\u003eSupports 12 V, 24 V, and 48 V battery banks with automatic voltage selection; 36 V systems can be set manually.\u003c\/li\u003e\n\u003cli\u003eNominal PV power ratings of 1450 W at 12 V, 2900 W at 24 V, and 5800 W at 48 V.\u003c\/li\u003e\n\u003cli\u003e250 V absolute maximum PV open-circuit voltage under cold conditions, with 245 V maximum for start-up and operation.\u003c\/li\u003e\n\u003cli\u003eTr terminal version with 35 mm² \/ AWG 2 PV and battery terminals for hard-wired array and battery connections.\u003c\/li\u003e\n\u003cli\u003eVE.Can, VE.Direct, and built-in Bluetooth connections for setup, monitoring, and system integration.\u003c\/li\u003e\n\u003cli\u003eParallel operation through VE.Can for synchronized charging across multiple controllers on larger installations.\u003c\/li\u003e\n\u003cli\u003eIP43-rated electronics with an IP22 connection area, suited to protected indoor marine electrical spaces.\u003c\/li\u003e\n\u003cli\u003eProtection against PV reverse polarity, output short circuit, and over-temperature conditions.\u003c\/li\u003e\n\u003cli\u003eSafety standards include EN\/IEC 62109-1, UL 1741, and CSA C22.2.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis controller fits Victron electrical systems where solar charging needs to be visible and coordinated from the central monitoring setup. VE.Can can daisy chain multiple MPPT controllers to a GX device, while VE.Direct and Bluetooth give local access for commissioning, charging profiles, and live performance checks.\u003c\/p\u003e\u003cp\u003eCharge settings can be matched to common battery types such as lithium, AGM, gel, and flooded lead-acid. The unit uses a multi-stage adaptive charge algorithm with default absorption, float, and equalization set points that can be adjusted through the supported setup methods.\u003c\/p\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe Tr version is the hard-wired terminal model, with 35 mm² \/ AWG 2 PV and battery terminals. It measures 216 x 295 x 103 mm and weighs 4.5 kg, so it belongs on a solid vertical panel or bulkhead with service access for cable bends, torque checks, and ventilation.\u003c\/p\u003e\u003cp\u003eThe enclosure rating makes it a protected-space component rather than a deck-mounted accessory. Install it in a dry electrical locker, machinery space, or electronics area away from direct spray and standing water, with disconnects and over-current protection selected for the vessel installation.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis controller is a good match for cruising yachts, trawlers, workboats, and fishing vessels carrying larger solar arrays and house battery banks. It is especially useful where panel output changes during the day because of clouds, sail shade, or the boat’s angle to the sun.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the connection area dry, secure cables so vibration does not load the terminals, and leave space around the housing for heat to dissipate. Periodic checks of terminal tightness, cable condition, and controller status are worthwhile in saltwater installations, especially after seasonal haul-out or major battery work.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52581875089589,"sku":"QBP563865","price":612.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332400_qbp563865.webp?v=1780200974"},{"product_id":"qbp053491","title":"Victron Energy SmartSolar MPPT RS 450\/100-MC4 Solar Charge Controller, 450V PV Input, 100A, 48V, VE.Can, VE.Direct","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SCC145110510 is an isolated SmartSolar MPPT RS 450\/100-MC4 solar charge controller for 48 V battery banks, built for larger solar arrays where high PV voltage and precise charging control matter. It supports up to 450 VDC PV input, has a 65 to 450 VDC MPPT operating range, starts charging from 120 VDC PV input, and delivers up to 100 A of charge current with a maximum charge power of 5.8 kW at 57.6 V.\u003c\/p\u003e\u003cp\u003eOn a boat, this unit makes sense for a serious 48 V DC house bank or hybrid energy system where the solar array is split into two independent trackers. Each tracker uses one pair of MC4 connectors and can handle up to 16 A operational input current, giving system designers more flexibility when panel strings face different angles or receive uneven sunlight during the day.\u003c\/p\u003e\u003cp\u003eThe unit includes Bluetooth for setup and monitoring through VictronConnect, plus VE.Can and VE.Direct for integration with a GX device, system monitoring, data logging, and remote firmware updates. It also has a front display for checking battery and controller status without opening a cabinet or connecting a phone.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e48 V solar charge controller with 100 A rated charge current for large DC battery banks.\u003c\/li\u003e\n\u003cli\u003eMaximum PV input voltage of 450 VDC, with MPPT operation from 65 to 450 VDC and 120 VDC startup voltage.\u003c\/li\u003e\n\u003cli\u003eTwo independent MPPT trackers help manage separate solar strings when panel orientation or shading differs across the vessel.\u003c\/li\u003e\n\u003cli\u003eMC4 PV connections, with one male and one female connector pair per tracker.\u003c\/li\u003e\n\u003cli\u003eFull galvanic isolation between PV and battery connections adds an extra layer of system safety in high-voltage solar installations.\u003c\/li\u003e\n\u003cli\u003eVE.Can, VE.Direct, and Bluetooth communication support monitoring, configuration, data logging, and integration with Victron GX systems.\u003c\/li\u003e\n\u003cli\u003eVE.Can allows up to 25 compatible units to operate in parallel and synchronize charging in larger systems.\u003c\/li\u003e\n\u003cli\u003eProgrammable relay, remote on-off, voltage sense, temperature sensor input, auxiliary input, and digital input support more complete system control.\u003c\/li\u003e\n\u003cli\u003eBuilt-in display and 30-day history make it easier to check charging behavior and tracker performance during commissioning and routine checks.\u003c\/li\u003e\n\u003cli\u003eIP21 steel enclosure with fan-assisted cooling, 7.9 kg weight, and 440 x 313 x 126 mm dimensions for planned cabinet installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis model is for 48 V battery systems, not a drop-in charger for a standard 12 V or 24 V house bank. Charge settings are adjustable, so it can be configured for different battery chemistries such as lead-acid and lithium when the rest of the system, BMS, cabling, fusing, and disconnects are specified correctly.\u003c\/p\u003e\u003cp\u003eThe PV side must stay within the 450 VDC maximum rating, and each tracker input should be treated as its own solar array input. The controller is not compatible with VE.Smart Networks, so monitoring and integration should be planned around Bluetooth, VE.Direct, VE.Can, a GX device, or VRM where applicable.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBecause the enclosure is rated IP21, this controller belongs in a dry electrical locker, technical compartment, or power cabinet with enough airflow for fan-assisted cooling. It should not be mounted where it can be exposed to washdowns, bilge water, spray, or regular condensation.\u003c\/p\u003e\u003cp\u003eThe battery side uses M8 bolt connections, while the PV side uses the MC4 inputs on the bottom of the unit. A properly rated DC disconnect is needed between the PV array and the charge controller, and high-voltage PV wiring should be laid out with the same care as any other critical onboard electrical system.\u003c\/p\u003e\u003ch6\u003eMonitoring and system integration\u003c\/h6\u003e\u003cp\u003eBluetooth setup through VictronConnect is useful during installation because the installer can check PV voltage, charge current, battery voltage, tracker behavior, and recent history from a phone or tablet. For vessels with a Cerbo GX or another GX device, VE.Can and VE.Direct bring the controller into the wider Victron monitoring environment.\u003c\/p\u003e\u003cp\u003eWhen the system is connected through a GX device with internet access, the charger can be part of a remote monitoring setup through VRM. That is useful for cruising boats, workboats, and off-grid marine systems where battery charging data, alarms, and charging trends need to be checked without being physically at the electrical panel.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis controller suits vessels with a larger solar array and a 48 V DC battery architecture, such as cruising catamarans, passagemaking sailboats, expedition vessels, and marine power systems that need more solar input than smaller 12 V or 24 V controllers can reasonably handle.\u003c\/p\u003e\u003cp\u003eIt is a strong fit when the boat has multiple panel strings, a Victron GX monitoring backbone, and a protected installation space where high-voltage solar equipment can be mounted, cooled, inspected, and serviced properly.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52581876957365,"sku":"QBP053491","price":1218.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332356_qbp053491.jpg?v=1780201047"},{"product_id":"qbp563850","title":"Victron Energy SmartSolar MPPT 150\/70-Tr Solar Charge Controller, 70A, 150V, 12\/24\/36\/48V, Bluetooth","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SCC115070211 is a SmartSolar MPPT 150\/70-Tr solar charge controller for charging 12V, 24V, 36V, or 48V battery banks from a boat’s solar array. It is rated for 70A maximum battery current, accepts up to 150V PV open-circuit voltage, and supports nominal PV power up to 1000W at 12V, 2000W at 24V, 3000W at 36V, and 4000W at 48V.\u003c\/p\u003e\u003cp\u003eThis controller is a practical match for cruising boats, fishing boats, and larger off-grid DC systems where solar charging needs to keep up with house loads, refrigeration, electronics, lighting, and battery recovery between engine or shore power cycles. Built-in Bluetooth lets the installer configure and monitor the charger through VictronConnect, while the VE.Direct port supports wired integration with compatible Victron monitoring hardware.\u003c\/p\u003e\u003cp\u003eThe Tr version uses screw terminals rather than MC4 solar connectors, which suits installations where custom cable runs are brought into a protected electrical locker or equipment space. With IP43 protection for the electronics and IP22 at the connection area, it should be mounted away from direct spray, washdowns, and standing moisture.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e70A MPPT solar charge controller for 12V, 24V, and 48V systems with automatic voltage selection, plus 36V selection by manual configuration.\u003c\/li\u003e\n\u003cli\u003e150V maximum PV open-circuit voltage for solar arrays that need higher string voltage than smaller deck-mounted panel setups.\u003c\/li\u003e\n\u003cli\u003eSupports up to 4000W nominal PV power on a 48V battery bank, 3000W on 36V, 2000W on 24V, and 1000W on 12V.\u003c\/li\u003e\n\u003cli\u003eBluetooth built in for setup, firmware updates, charge history, and live monitoring through VictronConnect.\u003c\/li\u003e\n\u003cli\u003eVE.Direct port for wired monitoring with compatible Victron GX and display options.\u003c\/li\u003e\n\u003cli\u003eMulti-stage adaptive charging with eight pre-programmed charge algorithms or a user-defined charge profile.\u003c\/li\u003e\n\u003cli\u003eWorks with common marine battery types when configured correctly, including lead-acid, AGM, gel, and lithium systems.\u003c\/li\u003e\n\u003cli\u003eRemote on\/off terminal and programmable relay add useful control options for more involved onboard power systems.\u003c\/li\u003e\n\u003cli\u003eProtection against PV reverse polarity, output short circuit, and over-temperature conditions.\u003c\/li\u003e\n\u003cli\u003eTr screw-terminal layout accepts up to 35 mm² or AWG2 cable at the PV and battery terminals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the charger vertically on a non-flammable surface with the terminals facing downward, leaving at least 10cm of clearance above and below the unit for cooling. The Tr model measures 185 x 250 x 95mm and weighs about 3kg, so the mounting surface should be solid and accessible for service.\u003c\/p\u003e\u003cp\u003eFor battery wiring, this 150\/70 model uses an 80A minimum and 100A maximum battery fuse rating. The battery should be connected before the solar array so the charger can detect the system voltage correctly, unless the system voltage has already been set manually during configuration.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe charger reaches up to 98% peak efficiency and uses a multi-stage charge algorithm with absorption, float, and equalization settings that can be adjusted to match the battery bank. Built-in temperature compensation helps charging stay aligned with changing conditions in an equipment space, and optional external sensing through compatible Victron devices can improve voltage and temperature feedback at the battery.\u003c\/p\u003e\u003cp\u003eFor boats already using Victron monitoring, the VE.Direct port is useful for bringing solar charging data into a broader DC power picture. Bluetooth remains convenient for local setup at the dock, during commissioning, or when checking charge performance after changing panels or battery settings.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis controller fits boats with a meaningful solar array rather than a small maintenance panel. It makes sense for cruising house banks, lithium upgrades, larger AGM or gel banks, and installations where solar needs to contribute real daily charging instead of only offsetting standby loads.\u003c\/p\u003e\u003cp\u003eBecause the connection area is not meant for exposed wet locations, it belongs in a dry locker, electrical compartment, or enclosed power bay with ventilation and cable protection. That placement also keeps battery and PV terminals away from accidental contact while leaving room for inspection and future service.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52581879939253,"sku":"QBP563850","price":382.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332393_qbp563850.jpg?v=1780201176"},{"product_id":"qbp563851","title":"Victron Energy SmartSolar MPPT 150\/60-Tr Solar Charge Controller, 60A, 150V PV, 12\/24\/48V, Bluetooth, VE.Direct, Screw Terminals","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SCC115060211 is a SmartSolar MPPT 150\/60-Tr solar charge controller for 12, 24, and 48 V battery systems, with 36 V selection available by software. It is rated for 60 A charging and accepts a PV open-circuit voltage up to 150 V absolute maximum in the coldest expected conditions, making it a strong fit for larger solar arrays on cruising boats, workboats, and off-grid marine electrical systems.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth gives access to setup, monitoring, firmware updates, and charging history through VictronConnect, while the VE.Direct port allows wired integration with GX devices, a PC, or other compatible Victron equipment. The MPPT tracking is useful on boats because solar input can change quickly as sails, rigging, antennas, clouds, and deck hardware move across the panels.\u003c\/p\u003e\u003cp\u003eThe Tr version uses screw terminals rather than MC4 connectors, which suits installations where the installer is landing appropriately sized PV and battery cabling inside an electrical locker or equipment space. With no cooling fan, up to 98% maximum efficiency, and a multi-stage adaptive charge algorithm, this controller is built for battery charging systems where steady energy harvest and controlled charging matter more than simple panel connection.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e60 A rated charge current for larger marine solar charging systems.\u003c\/li\u003e\n\u003cli\u003eSupports 12, 24, and 48 V battery banks with automatic voltage selection, plus 36 V selection by software.\u003c\/li\u003e\n\u003cli\u003e150 V absolute maximum PV open-circuit voltage, with 145 V start-up and operating maximum.\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth for setup, monitoring, updates, and synchronized charging between compatible SmartSolar controllers.\u003c\/li\u003e\n\u003cli\u003eVE.Direct port for wired connection to GX devices, a PC, or other compatible Victron system equipment.\u003c\/li\u003e\n\u003cli\u003eTr screw-terminal layout with PV terminals up to 35 mm2 or AWG2 and battery terminals up to 35 mm2 or AWG2.\u003c\/li\u003e\n\u003cli\u003eMulti-stage adaptive charging with eight pre-programmed algorithms and user-defined charging available.\u003c\/li\u003e\n\u003cli\u003eProtection against PV reverse polarity, output short circuit, and over-temperature conditions.\u003c\/li\u003e\n\u003cli\u003eIP43 protection for electronic components and IP22 protection at the connection area.\u003c\/li\u003e\n\u003cli\u003eOperating temperature range from -30 to +60 °C, with full rated output up to 40 °C.\u003c\/li\u003e\n\u003cli\u003eProgrammable relay and remote on-off connection for integration with alarms, control circuits, or a compatible battery management system.\u003c\/li\u003e\n\u003cli\u003eSafety compliance includes EN\/IEC 62109-1, UL 1741, and CSA C22.2.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis controller fits best in a planned DC charging system where array voltage, battery voltage, conductor size, overcurrent protection, and disconnects are matched before installation. The PV voltage must be high enough above battery voltage for the controller to start and continue charging, so panel string layout should be checked carefully, especially on vessels where available deck space can lead to mixed panel orientations or partial shading.\u003c\/p\u003e\u003cp\u003eFor Victron-based boats, the built-in Bluetooth is useful during commissioning and dockside checks, while VE.Direct gives the installer a path into a wider monitoring setup. Optional external battery voltage, temperature, and current sensing can be added through compatible Victron Bluetooth devices, which helps the controller charge based on conditions at the battery bank rather than only at the controller terminals.\u003c\/p\u003e\u003ch6\u003eInstallation and mounting\u003c\/h6\u003e\u003cp\u003eThe unit measures 185 x 250 x 95 mm and weighs 3 kg. It should be mounted in an indoor, unconditioned equipment area with enough ventilation for heat to move away from the enclosure. On a boat, that usually means a dry electrical locker, technical space, or serviceable compartment near the battery and solar wiring, not an exposed cockpit, deck, or bilge location.\u003c\/p\u003e\u003cp\u003eBecause the connection area is rated IP22, the terminals should be protected from direct spray, washdown water, dripping condensation, and loose gear. The screw terminals support large conductors, but final cable size, fusing, and isolation should be matched to the vessel layout and installed to the applicable marine electrical standard.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis controller is a good match for boats with enough solar capacity to justify a 60 A MPPT charger, such as cruising sailboats, passagemaking vessels, fishing boats with house loads, and remote mooring setups where solar keeps batteries supported between engine runs or shore power connections. The partial-shading behavior is especially relevant on sailboats and deck-mounted arrays, where rigging, booms, tenders, and antennas can create moving shade during the day.\u003c\/p\u003e\u003cp\u003eIt also suits installations where the owner wants local phone-based monitoring without adding a display, while still keeping the option to connect into a broader Victron system later. The optional pluggable SmartSolar display can be added at the front of the controller when quick visual checks at the equipment panel are preferred.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eOnce installed, the main upkeep is to keep the controller dry, ventilated, and accessible. Periodic checks should include terminal tightness, cable strain relief, signs of corrosion near connections, and confirmation that ventilation openings are not blocked by stored gear or service items.\u003c\/p\u003e\u003cp\u003eVictronConnect can be used to review charging behavior and stored trend data, which helps spot shading issues, panel faults, or battery charging patterns before they become harder-to-diagnose electrical problems on board.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52581879972021,"sku":"QBP563851","price":351.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332398_qbp563851.jpg?v=1780201178"},{"product_id":"qbp563853","title":"Victron Energy SmartSolar MPPT 100\/20 Charge Controller, 100V, 20A, 12\/24\/48V, Bluetooth","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SCC110020160R is a SmartSolar MPPT 100\/20 solar charge controller for 12V, 24V, and 48V battery banks. It manages solar input from boat-mounted panels and charges the battery with a maximum battery current of 20A, making it a practical fit for house battery charging on cruising boats, fishing boats, and compact off-grid marine power systems.\u003c\/p\u003e\u003cp\u003eThis controller accepts up to 100V PV open circuit voltage and supports nominal PV power up to 290W at 12V, 580W at 24V, and 1160W at 48V. Built-in Bluetooth lets the installer set up, monitor, and update the unit through the VictronConnect app, while the VE.Direct port gives a wired data path into compatible Victron monitoring and GX systems.\u003c\/p\u003e\u003cp\u003eFor marine installations, the unit should be mounted in a protected electrical space rather than an exposed deck or washdown area. Its IP43 electronics rating and IP22 connection-area rating suit sheltered locations such as a dry locker, cabin electrical panel area, or enclosed equipment compartment with proper ventilation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSmartSolar MPPT 100\/20 controller with 20A maximum battery charge current for 12V, 24V, and 48V battery systems.\u003c\/li\u003e\n\u003cli\u003e100V maximum PV open circuit voltage gives useful panel-string flexibility while staying within the controller limit.\u003c\/li\u003e\n\u003cli\u003eNominal PV power support of 290W at 12V, 580W at 24V, and 1160W at 48V helps match the controller to the vessel battery voltage.\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth works with the VictronConnect app for setup, firmware updates, live data, and performance checks from a phone or tablet.\u003c\/li\u003e\n\u003cli\u003eVE.Direct port allows wired integration with compatible Victron displays, GX devices, and monitoring hardware.\u003c\/li\u003e\n\u003cli\u003eAdaptive multi-stage charging and user-defined charge profiles help the controller work with different battery setups when configured correctly.\u003c\/li\u003e\n\u003cli\u003eLoad output with automatic low-voltage disconnect helps protect batteries from excessive discharge on supported installations.\u003c\/li\u003e\n\u003cli\u003eProtection against PV reverse polarity, output short circuit, and over-temperature conditions adds useful safeguards in a compact onboard power system.\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -30°C to +60°C, with full rated output up to 40°C, supports use in hot equipment spaces when ventilation is handled properly.\u003c\/li\u003e\n\u003cli\u003ePower terminals accept up to 6mm² or AWG10 cable for appropriately sized marine wiring runs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the controller close to the battery bank when possible, using cable sizes and fusing that suit the charge current and cable length. Keep PV input voltage below the 100V open circuit limit under the coldest expected panel conditions, since solar panel voltage rises in colder weather.\u003c\/p\u003e\u003cp\u003eOn a boat, mounting location matters. The controller belongs in a dry, serviceable electrical area with airflow around the case, not in the bilge, cockpit, lazarette floor, or any place that may see spray, standing water, fuel vapor, or salt buildup. A neat installation also leaves room to access the terminals and scan Bluetooth data during commissioning.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe built-in Bluetooth connection is useful for checking solar yield, battery voltage, charge stage, and settings without opening a panel. For vessels already using Victron monitoring, the VE.Direct port allows the controller to feed data into a compatible GX-based system for broader energy monitoring.\u003c\/p\u003e\u003cp\u003eThis unit is a good match for boats adding solar to maintain a house bank, reduce engine charging time at anchor, or keep essential DC loads supported during day trips and longer stays away from shore power. Correct battery profile selection in VictronConnect is important, especially when the system uses lithium, AGM, gel, or flooded lead-acid batteries.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodic checks should include terminal tightness, cable condition, fuse condition, ventilation clearance, and any signs of corrosion around the installation area. Keeping the controller and wiring dry and clean helps preserve stable charging performance in the saltwater environment.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52581880004789,"sku":"QBP563853","price":89.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332401_qbp563853.webp?v=1780201178"},{"product_id":"qbp969322","title":"Victron Energy SmartSolar MPPT VE.Can Solar Charge Controller, 250V PV, 12\/24\/36\/48V, Bluetooth","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SmartSolar Charge Controller MPPT 250\/70 up to 250\/100 VE.Can is a high-capacity MPPT solar charge controller range for larger onboard solar arrays feeding 12 V, 24 V, or 48 V battery banks, with 36 V setup available manually. The range supports up to 250 V PV open-circuit voltage in cold conditions and is available in 70 A, 85 A, and 100 A charge-current versions.\u003c\/p\u003e\u003cp\u003eThis SmartSolar VE.Can range is a practical fit for cruising boats, workboats, and off-grid marine electrical systems where multiple solar strings, lithium or lead-acid batteries, and networked monitoring may be part of the same installation. VE.Can, VE.Direct, and built-in Bluetooth give the installer several ways to configure, monitor, and integrate the controller with Victron GX devices and VictronConnect.\u003c\/p\u003e\u003cp\u003eThe controller uses multi-stage adaptive charging with preset or user-defined charge algorithms, and it can coordinate charging with other SmartSolar controllers. That matters on boats with split solar areas across hardtops, arches, davits, or cabin tops, where shading can change through the day.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMPPT solar charge control for 12 V, 24 V, and 48 V battery banks, with automatic voltage selection and manual 36 V setup.\u003c\/li\u003e\n\u003cli\u003e250 V maximum PV open-circuit voltage, with a 245 V start-up and operating maximum.\u003c\/li\u003e\n\u003cli\u003eAvailable in 70 A, 85 A, and 100 A charge-current configurations to match different solar array and battery-bank sizes.\u003c\/li\u003e\n\u003cli\u003eVE.Can, VE.Direct, and built-in Bluetooth for setup, monitoring, firmware updates, and integration with Victron system components.\u003c\/li\u003e\n\u003cli\u003eVE.Can synchronized operation supports up to 25 controllers, useful when larger boats use more than one solar controller.\u003c\/li\u003e\n\u003cli\u003eBluetooth synchronized operation supports up to 10 controllers when a wired VE.Can link is not the preferred layout.\u003c\/li\u003e\n\u003cli\u003eMulti-stage adaptive charging with eight pre-programmed algorithms or a user-defined charge profile.\u003c\/li\u003e\n\u003cli\u003eProtection against PV reverse polarity, output short circuit, and over-temperature conditions.\u003c\/li\u003e\n\u003cli\u003eRemote on\/off input and programmable relay for integration with BMS control, alarms, or other onboard system logic.\u003c\/li\u003e\n\u003cli\u003eIP43 protection for electronic components and IP22 protection at the connection area, with an operating temperature range of -30 °C to +60 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product range is offered in different charge-current and PV-connection configurations. The charge-current rating changes the maximum charging output, while the PV connection changes how the solar array wiring lands at the controller.\u003c\/p\u003e\u003cp\u003eThe Tr versions use terminal connections for PV wiring, while the MC4 versions use MC4 connector pairs. Across the range, the controllers share the same SmartSolar VE.Can platform, Bluetooth access, VE.Direct communication, adaptive charging logic, and 250 V PV input class.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSCC125070421: PV connection Tr, rated charge current 70 A. The terminal PV connection suits installations where array wiring is landed directly into the controller enclosure rather than using plug-in MC4 leads.\u003c\/li\u003e\n\u003cli\u003eSCC125070521: PV connection MC4, rated charge current 70 A. The MC4 connection format works well where the solar array wiring already uses MC4-style connectors and a cleaner plug-in PV connection is preferred.\u003c\/li\u003e\n\u003cli\u003eSCC125085411: PV connection Tr, rated charge current 85 A. The 85 A output gives more charging headroom than the 70 A models while keeping terminal-style PV wiring.\u003c\/li\u003e\n\u003cli\u003eSCC125085511: PV connection MC4, rated charge current 85 A. This version pairs the 85 A charge rating with MC4 PV inputs for installations using connectorized solar string wiring.\u003c\/li\u003e\n\u003cli\u003eSCC125110512: PV connection MC4, rated charge current 100 A. This is the highest charge-current option listed in this range and uses MC4 PV connections for larger solar installations within the controller limits.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the controller in a dry, ventilated electrical space where the connection area is protected from spray and where heat can move away from the enclosure. The protection rating is not intended for exposed deck or cockpit mounting, so engine-room bulkheads, electrical lockers, and protected technical compartments are the more typical marine locations.\u003c\/p\u003e\u003cp\u003eThe battery terminals accept up to 35 mm² or AWG2 cable, which is important on higher-current 70 A to 100 A charging circuits. Cable size, overcurrent protection, disconnects, and routing should be matched to the vessel’s DC standards, battery chemistry, and expected charging current.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eFor a networked Victron installation, VE.Can lets multiple controllers communicate with a GX device so each controller can be monitored individually while the system operates as one coordinated charging setup. VE.Direct is also available for wired data connection, and Bluetooth gives direct access from a phone or tablet for configuration and status checks.\u003c\/p\u003e\u003cp\u003eThe remote on\/off input can be used with compatible BMS or system-control wiring, which is especially useful in lithium battery installations where charging sources may need to be enabled or disabled by the battery management system. The programmable relay can be used for alarm or control logic where the rest of the system supports it.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis range makes sense for vessels carrying larger solar arrays, such as cruising catamarans, monohulls with hardtops or arches, sportfishing boats with house loads at anchor, and workboats that need solar charging tied into a monitored DC system. The MPPT tracking helps when panels see changing light from rigging, radar arches, antennas, sails, clouds, or dockside shading.\u003c\/p\u003e\u003cp\u003eFor owners already using Victron batteries, inverters, GX monitoring, or the VictronConnect app, the SmartSolar VE.Can range fits naturally into the same electrical ecosystem without making everyday monitoring complicated.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Tr \/ 70 A","offer_id":52581912674485,"sku":"QBP969322-V1","price":536.35,"currency_code":"USD","in_stock":true},{"title":"MC4 \/ 70 A","offer_id":52581912707253,"sku":"QBP969322-V2","price":0.0,"currency_code":"USD","in_stock":false},{"title":"Tr \/ 85 A","offer_id":52581912740021,"sku":"QBP969322-V3","price":0.0,"currency_code":"USD","in_stock":false},{"title":"MC4 \/ 85 A","offer_id":52581912772789,"sku":"QBP969322-V4","price":0.0,"currency_code":"USD","in_stock":false},{"title":"MC4 \/ 100 A","offer_id":52581912805557,"sku":"QBP969322-V5","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1336502_qbp969322.webp?v=1780201497"},{"product_id":"qbp563846","title":"Victron Energy SmartSolar MPPT Charge Controller, Bluetooth, VE.Direct, Load Output","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SmartSolar MPPT charge controller with load output is a solar charge controller for boat battery systems that use a small to mid-size PV array with a 12 V or 24 V DC battery bank. Across this range, the key choices are 75 V or 100 V maximum PV input and 10 A, 15 A or 20 A rated charge current.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth keeps setup, monitoring and updates accessible through VictronConnect, while the VE.Direct port gives a wired path into Victron GX equipment, a PC or other compatible monitoring hardware. The load output can feed selected DC loads and disconnect them at a low battery voltage, which is useful on boats where house batteries may sit through changing sun, shade from rigging and overnight demand.\u003c\/p\u003e\u003cp\u003eWith MPPT charging, peak efficiency up to 98 percent and multi-stage adaptive charging profiles for lithium, AGM, gel and flooded batteries, this range fits dayboats, cruising sailboats, fishing boats and small off-grid marine battery systems where solar charging needs to be managed locally and clearly.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMPPT solar charging for 12 V and 24 V battery systems, with variants covering 75 V or 100 V maximum PV input and 10 A, 15 A or 20 A rated charge current.\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth works with the VictronConnect app for setup, monitoring, firmware updates and charge setting changes from a phone or tablet.\u003c\/li\u003e\n\u003cli\u003eVE.Direct port supports wired data connection to Victron GX equipment, a PC or other compatible devices for system monitoring.\u003c\/li\u003e\n\u003cli\u003eLoad output can disconnect connected DC loads at a preset low-voltage point to help prevent excessive battery discharge.\u003c\/li\u003e\n\u003cli\u003eBatteryLife mode adjusts the load disconnect level when the battery is not being fully recharged, helping reduce repeated deep discharge cycles.\u003c\/li\u003e\n\u003cli\u003eMulti-stage adaptive charging supports lithium, AGM, gel and flooded battery types.\u003c\/li\u003e\n\u003cli\u003eOutput short-circuit and over-temperature protection are built into the controller.\u003c\/li\u003e\n\u003cli\u003eProtection category is IP43 at the electronic components and IP22 at the connection area, so the controller belongs in a location on board that is protected from spray and has ventilation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis SmartSolar MPPT charge controller range is offered in several configurations for different solar array and charge current requirements.\u003c\/p\u003e\u003cp\u003eThe variants share the same SmartSolar MPPT platform with built-in Bluetooth, VE.Direct communication and load output. The main differences are the maximum PV input voltage and the rated charge current, which should be matched to the panel string and battery charging plan.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSCC075010060R: 75 V maximum PV input and 10 A rated charge current. This is the lower-current option in the range for compact solar arrays feeding smaller house or auxiliary battery banks.\u003c\/li\u003e\n\u003cli\u003eSCC075015060R: 75 V maximum PV input and 15 A rated charge current. It keeps the same 75 V PV ceiling while allowing more charging current than the 10 A model.\u003c\/li\u003e\n\u003cli\u003eSCC110015060R: 100 V maximum PV input and 15 A rated charge current. The higher PV input rating gives more room where array voltage is the limiting factor, while staying at 15 A charge current.\u003c\/li\u003e\n\u003cli\u003eSCC110020060R: 100 V maximum PV input and 20 A rated charge current. This is the highest-current option listed here and gives the most headroom in this group for compatible PV and battery wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the controller where the terminals stay protected from spray, bilge moisture and washdown water. The enclosure rating is IP43 for the electronic components and IP22 at the connection area, so it should live in a dry locker, console, cabin electrical panel or similar space with airflow around the case.\u003c\/p\u003e\u003cp\u003eUse DC wiring and over-current protection sized for the selected controller, PV array and battery bank. The power terminals accept up to 6 mm² or AWG10 cable, and the installation should leave access to the terminals and status LEDs for setup and later service checks.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eBluetooth is built into the SmartSolar unit, so setup changes, live status and history can be handled through the VictronConnect app without adding a separate Bluetooth dongle. For installations that use a Cerbo GX or another Victron monitoring device, the VE.Direct port can feed charger data into the wider system.\u003c\/p\u003e\u003cp\u003eThe load output is useful for limited DC loads that should shut down before the battery is run flat, such as a small accessory circuit or a control load within the selected model’s current limit. Main vessel loads, windlasses, inverters and other high-current equipment should remain on properly protected circuits sized for their demand.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis range works with common 12 V and 24 V marine battery banks and includes charge profiles for lithium, AGM, gel and flooded batteries. The PV array must stay within the selected controller’s voltage and short-circuit current limits, so panel string layout should be checked before the order is placed.\u003c\/p\u003e\u003cp\u003eThese controllers make the most sense for vessels with modest solar arrays, such as cockpit arch panels, cabin-top panels or a small hardtop array, where partial shading and changing sun angle are part of normal use.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"75 V \/ 10 A","offer_id":52581955371189,"sku":"QBP563846-V1","price":62.05,"currency_code":"USD","in_stock":true},{"title":"75 V \/ 15 A","offer_id":52581955403957,"sku":"QBP563846-V2","price":67.15,"currency_code":"USD","in_stock":true},{"title":"100 V \/ 15 A","offer_id":52581955436725,"sku":"QBP563846-V3","price":78.2,"currency_code":"USD","in_stock":true},{"title":"100 V \/ 20 A","offer_id":52581955469493,"sku":"QBP563846-V4","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1336129_qbp563846.webp?v=1780201737"},{"product_id":"qbp509433","title":"Victron Energy SmartSolar MPPT 150\/100-Tr VE.Can Solar Charge Controller","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SmartSolar MPPT 150\/100-Tr VE.Can is a 100 A solar charge controller for larger onboard solar arrays that need MPPT charging, networked monitoring, and high-current battery charging in one unit. The 150\/100 rating means it accepts PV arrays up to 150 V absolute maximum open-circuit voltage, with a 145 V startup and operating maximum, while delivering up to 100 A of charge current to the battery bank.\u003c\/p\u003e\u003cp\u003eThis Tr version uses screw terminals rather than MC4 connectors, which suits custom marine installations where cable routing, conductor size, and service access are planned around the boat’s electrical space. It has built-in Bluetooth, VE.Can, and VE.Direct communication, so it can work as a standalone charger through VictronConnect or become part of a larger Victron system with GX monitoring and synchronized charging.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e100 A rated charge current for substantial solar charging on cruising boats, fishing boats, and other vessels with larger house battery banks.\u003c\/li\u003e\n\u003cli\u003e150 V absolute maximum PV open-circuit voltage, with a 145 V startup and operating maximum for solar array planning.\u003c\/li\u003e\n\u003cli\u003eBattery-voltage support depends on the selected variant: 12\/24\/48 V auto select with 36 V manual selection, or 12\/24 V only.\u003c\/li\u003e\n\u003cli\u003ePeak efficiency of 98% with natural convection cooling, so there is no cooling fan to draw dust or salt air through the unit.\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth, VE.Can, and VE.Direct communication for setup, monitoring, updates, and integration with compatible Victron equipment.\u003c\/li\u003e\n\u003cli\u003eVE.Can supports synchronized parallel operation with up to 25 controllers, while Bluetooth supports synchronized operation with up to 10 controllers.\u003c\/li\u003e\n\u003cli\u003eMulti-stage adaptive charging with eight preprogrammed algorithms or a user-defined charging algorithm.\u003c\/li\u003e\n\u003cli\u003eCharging support for lithium, AGM, gel, and flooded batteries when configured correctly for the battery type.\u003c\/li\u003e\n\u003cli\u003eTr screw terminals accept up to 35 mm² \/ AWG2 conductors for both PV and battery connections.\u003c\/li\u003e\n\u003cli\u003eIP43 protection for electronic components and IP22 protection at the connection area, making protected indoor installation the right location on board.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis SmartSolar MPPT 150\/100-Tr VE.Can range is offered in two battery-voltage configurations. Both versions use the same 150\/100-Tr VE.Can format, 100 A charge rating, screw-terminal connection style, and Victron communication options.\u003c\/p\u003e\u003cp\u003eThe main difference is the battery-bank voltage range supported by the controller. That difference matters before purchase, especially on vessels with 48 V house systems or mixed-voltage refit plans.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSCC115110411: Battery voltage support 12\/24\/48 V auto select, with 36 V manual selection. This version fits systems where the controller may be used with higher-voltage house or auxiliary battery banks, including 48 V installations.\u003c\/li\u003e\n\u003cli\u003eSCC115110412: Battery voltage support 12\/24 V only. This version is for conventional 12 V or 24 V onboard DC battery banks and should not be treated as a 36 V or 48 V controller.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and mounting\u003c\/h6\u003e\u003cp\u003eThe controller should be mounted in a protected electrical space rather than an exposed deck, cockpit, or washdown area. The protection ratings cover the electronics and connection area separately, so the unit still needs a dry, ventilated location with sensible strain relief and cable routing.\u003c\/p\u003e\u003cp\u003eAt 216 x 295 x 103 mm and 4.5 kg, it needs a solid mounting surface with space around the enclosure for heat to move away naturally. In a boat installation, short DC runs, clean crimps, correct overcurrent protection, and corrosion-aware cable management are just as important as the controller rating itself.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eVE.Can gives this charger a practical place in larger Victron-based marine systems, especially where solar data, charge state, and battery charging behavior need to be visible from a central display or remote monitoring setup. VE.Direct and Bluetooth add useful flexibility for commissioning, diagnostics, and day-to-day checks from a phone, tablet, PC, or compatible system device.\u003c\/p\u003e\u003cp\u003eThe charger includes remote on\/off and a programmable relay, which can help with controlled system behavior when the installation includes battery management, alarms, or other automation. It also includes protection against PV reverse polarity, output short circuit, and over-temperature conditions.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis controller is a strong fit for boats carrying enough solar to make a small regulator impractical, including cruising sailboats, powerboats, and workboats with hardtop, arch, cabin-top, or deck-mounted panels. MPPT tracking is especially useful on vessels where shadows from sails, antennas, masts, radar arches, or moving clouds change panel output during the day.\u003c\/p\u003e\u003cp\u003eFor owners planning a solar upgrade, the key buying checks are battery-bank voltage, array open-circuit voltage in cold conditions, expected charge current, terminal access, and the mounting location. When those points match the installation, this unit can serve as the main solar charging controller in a serious onboard DC power system.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"12\/24\/48 V Auto Select (36 V: Manual)","offer_id":52581955567797,"sku":"QBP509433-V13","price":516.8,"currency_code":"USD","in_stock":true},{"title":"12\/24 V Only","offer_id":52581955600565,"sku":"QBP509433-V14","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1336128_qbp509433.webp?v=1780201738"},{"product_id":"qbp563847","title":"Victron Energy SmartSolar MPPT Solar Charge Controller, 250V, 12\/24\/48V, Bluetooth, VE.Direct, Screw Terminals","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SmartSolar MPPT 250\/60 and 250\/70 is a solar charge controller range for charging 12 V, 24 V, 36 V, and 48 V battery banks from a PV array, with 60 A and 70 A rated charge current options. It accepts PV open-circuit voltage up to 250 V absolute maximum, runs at up to 99% efficiency, and includes Bluetooth plus VE.Direct for setup, monitoring, and system data.\u003c\/p\u003e\u003cp\u003eOn a boat, this controller suits larger solar installations feeding house banks on cruising sailboats, powerboats, and workboats. MPPT tracking is useful where panel output changes through the day from clouds, rigging shadows, antennas, davits, or partial shading from deck gear.\u003c\/p\u003e\u003cp\u003eThe unit is built for protected installation spaces rather than exposed deck mounting. Its electronics are rated IP43 and the connection area is rated IP22, so it belongs in a dry electrical locker, equipment bay, or similar interior location with access for wiring and service.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMPPT solar charging for 12 V, 24 V, and 48 V battery systems with automatic voltage selection, plus 36 V selection by software tool.\u003c\/li\u003e\n\u003cli\u003e250 V PV input class with 250 V absolute maximum open-circuit voltage and 245 V start-up and operating maximum.\u003c\/li\u003e\n\u003cli\u003eTwo rated charge current options: 60 A for the 250\/60 version and 70 A for the 250\/70 version.\u003c\/li\u003e\n\u003cli\u003eMaximum efficiency of 99% with no cooling fan, which helps keep operation quiet in interior equipment spaces.\u003c\/li\u003e\n\u003cli\u003eBluetooth Smart built in for wireless setup, monitoring, updates, and synchronization through the Victron ecosystem.\u003c\/li\u003e\n\u003cli\u003eVE.Direct port for wired connection to GX devices, a PC, or other compatible Victron monitoring equipment.\u003c\/li\u003e\n\u003cli\u003eMulti-stage adaptive charging with eight pre-programmed algorithms or a user-defined charge algorithm.\u003c\/li\u003e\n\u003cli\u003eProtection against PV reverse polarity, output short circuit, and over-temperature conditions.\u003c\/li\u003e\n\u003cli\u003eRemote on\/off connection and a programmable relay for integration with battery management or alarm functions.\u003c\/li\u003e\n\u003cli\u003eUp to 10 units can be synchronized with Bluetooth when the solar system uses multiple controllers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two charge-current configurations within the SmartSolar MPPT 250 V range.\u003c\/p\u003e\u003cp\u003eThe main difference between the variants is rated charge current and the corresponding nominal PV power by battery voltage. The core SmartSolar features, including Bluetooth, VE.Direct communication, adaptive charging, and the same 250 V PV input class, apply across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSCC125060221: 60 A rated charge current. This version matches installations sized around the 250\/60 controller, with nominal PV power of 860 W at 12 V, 1720 W at 24 V, 2580 W at 36 V, or 3440 W at 48 V.\u003c\/li\u003e\n\u003cli\u003eSCC125070220: 70 A rated charge current. This version supports larger arrays within the same controller family, with nominal PV power of 1000 W at 12 V, 2000 W at 24 V, 3000 W at 36 V, or 4000 W at 48 V.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe charge profile can be adjusted through the rotary switch, display, VE.Direct, or Bluetooth, which is helpful when matching the controller to the battery chemistry and charging requirements on board. Default absorption, float, and equalization voltages are set by system voltage, and the charging algorithm can be changed when the battery bank calls for a different profile.\u003c\/p\u003e\u003cp\u003eBluetooth monitoring makes it practical to check solar input, battery voltage, and charging behavior without opening a panel each time. VE.Direct is useful on vessels that already use Victron GX monitoring or want wired data integration at the nav station or electrical panel.\u003c\/p\u003e\u003ch6\u003eInstallation and marine fit\u003c\/h6\u003e\u003cp\u003eThe controller should be installed where it is protected from direct spray, washdowns, and standing moisture. The IP43 electronics rating and IP22 connection-area rating are suitable for sheltered equipment spaces, not exposed cockpit, deck, or transom locations.\u003c\/p\u003e\u003cp\u003eAllow space around the unit for cabling and heat dissipation, especially when the controller is working near its rated output. The operating temperature range is -30°C to +60°C, with full rated output up to 40°C before derating applies.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis range is a strong fit for boats with meaningful solar capacity, larger house battery banks, and a need for proper charge control rather than a small trickle-charge setup. It is especially relevant for cruising boats and fishing vessels where solar helps support refrigeration, electronics, lighting, pumps, and other DC loads while away from shore power.\u003c\/p\u003e\u003cp\u003eFor refits, confirm the selected 60 A or 70 A version against the planned array size, battery-bank voltage, wire sizing, overcurrent protection, and mounting space before installation.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"60 A","offer_id":52581955633333,"sku":"QBP563847-V1","price":414.8,"currency_code":"USD","in_stock":true},{"title":"70 A","offer_id":52581955666101,"sku":"QBP563847-V2","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1336133_qbp563847.webp?v=1780201739"},{"product_id":"qbp563848","title":"Victron Energy SmartSolar MPPT Solar Charge Controller, 150V, 12\/24\/48V, Built-In Bluetooth","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SmartSolar MPPT 150\/35 and 150\/45 is a solar charge controller range for boat solar arrays feeding 12 V, 24 V, or 48 V battery banks, with 36 V selection available through software. Both models use MPPT charging, accept up to 150 V PV open circuit voltage in cold conditions, and include built-in Bluetooth for setup and monitoring through VictronConnect.\u003c\/p\u003e\u003cp\u003eThis range is a strong fit for marine house-bank charging on cruising sailboats, fishing boats, workboats, and off-grid dockside systems where panel output can change quickly because of clouds, rigging, antennas, radar arches, or moving shadows. The controller manages charging with a multi-stage adaptive algorithm and works with common battery types, including lithium, AGM, gel, and flooded batteries when configured correctly.\u003c\/p\u003e\u003cp\u003eThe 150\/35 model is rated for 35 A charge current, while the 150\/45 model is rated for 45 A. Both share a 98 percent maximum efficiency rating, VE.Direct communication, natural cooling without a fan, and the same 130 x 186 x 70 mm enclosure size, which helps when planning a protected electronics locker or energy-system panel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMPPT solar charging for 12 V, 24 V, and 48 V battery systems with automatic voltage selection; 36 V can be selected with software.\u003c\/li\u003e\n\u003cli\u003e150 V absolute maximum PV open circuit voltage, with 145 V start-up and operating maximum.\u003c\/li\u003e\n\u003cli\u003eAvailable in 35 A and 45 A charge-current versions to match different solar array sizes and battery-bank demands.\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth Smart for VictronConnect setup, monitoring, firmware updates, and wireless charging synchronization.\u003c\/li\u003e\n\u003cli\u003eVE.Direct port for a wired data connection to GX devices, PCs, or other compatible Victron monitoring equipment.\u003c\/li\u003e\n\u003cli\u003eMulti-stage adaptive charge algorithm with eight pre-programmed options and adjustable absorption and float settings.\u003c\/li\u003e\n\u003cli\u003eProtection against PV reverse polarity, PV short circuit, PV reverse current, output short circuit, and over-temperature conditions.\u003c\/li\u003e\n\u003cli\u003eNatural cooling with no fan, maximum efficiency of 98 percent, and full rated output up to 40 degrees C.\u003c\/li\u003e\n\u003cli\u003eIP43 protection for electronic components and IP22 protection at the connection area, so installation should be in a protected location away from direct washdown.\u003c\/li\u003e\n\u003cli\u003eStores 46 days of trend data, including battery voltage, current, temperature, PV voltage, and PV current.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe product is offered in two configurations with the same SmartSolar MPPT 150 platform and different charge-current ratings.\u003c\/p\u003e\u003cp\u003eThe model number indicates the main difference: 150\/35 is the 35 A version, and 150\/45 is the 45 A version. Both variants share built-in Bluetooth, VE.Direct communication, 16 mm² or AWG6 power terminals, the same enclosure size, and support for 12 V, 24 V, and 48 V systems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSCC115035210, Model MPPT 150\/35: 35 A rated charge current with nominal PV power up to 500 W on 12 V, 1000 W on 24 V, 1500 W on 36 V, or 2000 W on 48 V systems. This version suits a moderate solar array on a compact house-bank system while keeping the same monitoring and communication features.\u003c\/li\u003e\n\u003cli\u003eSCC115045212, Model MPPT 150\/45: 45 A rated charge current with nominal PV power up to 650 W on 12 V, 1300 W on 24 V, 1950 W on 36 V, or 2600 W on 48 V systems. This version gives the same connection style and enclosure footprint with more charging current for larger arrays.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the controller in a dry, ventilated, protected area such as an electrical locker, equipment cabinet, or under-berth power panel. The connection area has an IP22 rating, so it should not be placed where it can be hit by spray, bilge water, or washdown water.\u003c\/p\u003e\u003cp\u003ePanel voltage must be checked carefully before installation, especially on boats used in cold climates where PV open circuit voltage rises as temperature drops. The PV voltage must also exceed battery voltage by 5 V for start-up and then remain at least 1 V above battery voltage while operating.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eBluetooth setup is useful during commissioning because charge profiles, battery type, device naming, and live data can be handled from a phone or tablet without opening the electrical panel. For larger Victron systems, the VE.Direct port lets the controller report data to compatible GX equipment for remote monitoring and energy-system visibility.\u003c\/p\u003e\u003cp\u003eBattery chemistry and bank voltage should be confirmed before the unit is energized. Correct cable sizing, overcurrent protection, isolation, and marine installation practices still need to be followed, especially on high-current DC systems where voltage drop and heat can become problems.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis SmartSolar range fits boats that need dependable solar charging for refrigeration, lighting, electronics, pumps, and house loads while away from shore power. It is especially useful where panels see partial shade during the day, such as sailboats with rigging shadows or hardtop installations with antennas and deck equipment nearby.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"MPPT 150\/35","offer_id":52581955698869,"sku":"QBP563848-V1","price":184.45,"currency_code":"USD","in_stock":true},{"title":"MPPT 150\/45","offer_id":52581955731637,"sku":"QBP563848-V2","price":218.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1336134_qbp563848.webp?v=1780201741"},{"product_id":"qbp563849","title":"Victron Energy SmartSolar MPPT Charge Controller, 12\/24V, 100V PV Input, VE.Direct, Bluetooth","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SmartSolar MPPT 100\/30 \u0026amp; 100\/50 is a Bluetooth-enabled MPPT solar charge controller range for 12 V and 24 V battery systems on boats, vans, and off-grid installations. Both versions accept up to 100 V PV open circuit voltage and use fast maximum power point tracking to keep solar yield steady when light changes across the deck, cabin top, hardtop, or arch.\u003c\/p\u003e\u003cp\u003eThis range suits marine solar installs where panel output can shift during the day because of sails, rigging, antennas, railings, clouds, or moving shadows. The 100\/30 version supplies up to 30 A charge current, while the 100\/50 version supplies up to 50 A, giving installers a clear way to match the controller to the array size and battery bank.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth works with the VictronConnect app for setup, live monitoring, firmware updates, and charging profile changes from a phone or tablet. A VE.Direct port is also included for wired integration with compatible Victron GX devices, PCs, or other system monitoring hardware.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMPPT solar charging for 12 V and 24 V battery banks with automatic battery voltage selection.\u003c\/li\u003e\n\u003cli\u003e100 V maximum PV open circuit voltage across both variants for flexible solar array planning.\u003c\/li\u003e\n\u003cli\u003eRated charge current options of 30 A or 50 A, depending on the model selected.\u003c\/li\u003e\n\u003cli\u003eNominal PV input support up to 440 W at 12 V or 880 W at 24 V on the 100\/30 model, and up to 700 W at 12 V or 1400 W at 24 V on the 100\/50 model.\u003c\/li\u003e\n\u003cli\u003eMaximum efficiency of 98 percent with natural cooling and no cooling fan.\u003c\/li\u003e\n\u003cli\u003eBluetooth built in for setup, monitoring, updates, and charge controller synchronization through VictronConnect.\u003c\/li\u003e\n\u003cli\u003eVE.Direct port for wired data connection to compatible Victron GX monitoring systems and other supported devices.\u003c\/li\u003e\n\u003cli\u003eProgrammable multi-stage adaptive charge algorithm, with eight pre-programmed settings available by rotary switch.\u003c\/li\u003e\n\u003cli\u003eProtection against PV reverse polarity, PV reverse current, output short circuit, and high temperature conditions.\u003c\/li\u003e\n\u003cli\u003eIP43 protection for the electronic components and IP22 protection at the connection area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two charge-current configurations within the SmartSolar MPPT 100 V range.\u003c\/p\u003e\u003cp\u003eThe main difference is output capacity. The 100\/30 model is the lower-current option for smaller solar arrays and battery banks, while the 100\/50 model handles larger PV input and higher charging current. Both variants share 12\/24 V automatic battery voltage selection, 100 V maximum PV open circuit voltage, Bluetooth, and VE.Direct connectivity.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSCC110030210: Model MPPT 100\/30. This version supplies up to 30 A charge current and is rated for nominal PV power up to 440 W on 12 V systems or 880 W on 24 V systems.\u003c\/li\u003e\n\u003cli\u003eSCC110050210: Model MPPT 100\/50. This version supplies up to 50 A charge current and is rated for nominal PV power up to 700 W on 12 V systems or 1400 W on 24 V systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFor a boat installation, the controller should be mounted in a protected, ventilated location close enough to the battery bank to keep cable runs sensible and voltage drop under control. The connection area is IP22, so it belongs away from direct spray, bilge splash, and places where wet gear can drip onto the terminals.\u003c\/p\u003e\u003cp\u003eThe unit uses 16 mm² or AWG6 power terminals, which gives installers room for appropriately sized DC cabling. The PV voltage must rise above the battery voltage before charging starts, so solar array design should be checked carefully against battery voltage, cold-weather open circuit voltage, and the 100 V input limit.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eBluetooth setup makes this controller practical for refits where access to the electrical locker is awkward after installation. From the app, the user can check charging status, review history, change battery settings, and monitor solar performance without opening panels or lockers at anchor.\u003c\/p\u003e\u003cp\u003eFor larger Victron-based electrical systems, the VE.Direct port allows the solar charger to feed data into a GX device and remote monitoring setup. That is useful on cruising boats, fishing boats, and liveaboard systems where solar charging is part of a broader DC power plan with battery monitoring, inverter charging, and shore power management.\u003c\/p\u003e\u003ch6\u003eMarine use cases\u003c\/h6\u003e\u003cp\u003eThis SmartSolar range is a good match for vessels adding solar to maintain house batteries, support refrigeration and electronics at anchor, or reduce generator and shore power use during coastal cruising. The MPPT tracking is especially useful when panels are mounted in areas where shade moves across the array during normal boat use.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"MPPT 100\/30","offer_id":52581955961013,"sku":"QBP563849-V1","price":128.35,"currency_code":"USD","in_stock":true},{"title":"MPPT 100\/50","offer_id":52581955993781,"sku":"QBP563849-V2","price":184.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1336136_qbp563849.webp?v=1780201742"},{"product_id":"qbp925648","title":"Victron Energy SmartSolar MPPT 150\/70 VE.Can Solar Charge Controller, 150V, 70A, Bluetooth","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SmartSolar MPPT 150\/70 VE.Can is a 70 A solar charge controller for larger battery-based solar systems on boats, with support for 12 V, 24 V and 48 V battery banks by auto selection, plus 36 V by manual setup. It accepts PV input up to 150 V absolute maximum in cold conditions, with a 145 V start-up and operating maximum, making it suitable for multi-panel solar arrays where string voltage and battery charging control need to be managed carefully.\u003c\/p\u003e\u003cp\u003eThis controller uses MPPT charging to track solar panel output as light changes during real use, including passing cloud, shade from rigging, radar arches or deck hardware, and changing sun angle while underway. It also includes built-in Bluetooth, VE.Can and VE.Direct communication, so it can be monitored locally from a mobile device or integrated with a Victron system display or GX device.\u003c\/p\u003e\u003cp\u003eFor marine installations, this unit belongs in a protected electrical space rather than an exposed deck location. The electronics are rated IP43 and the connection area is rated IP22, so placement should keep it away from direct spray, bilge water and washdowns while still allowing airflow for heat management.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e70 A rated charge current for substantial solar charging capacity on cruising boats, fishing boats and larger off-grid DC systems.\u003c\/li\u003e\n\u003cli\u003eSupports 12 V, 24 V and 48 V battery systems by auto selection, with 36 V available through manual configuration.\u003c\/li\u003e\n\u003cli\u003ePV input supports up to 150 V absolute maximum in cold conditions, with 145 V maximum for start-up and operation.\u003c\/li\u003e\n\u003cli\u003eNominal PV power is 1000 W at 12 V, 2000 W at 24 V, 3000 W at 36 V and 4000 W at 48 V, with input limiting when more PV power is connected.\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth allows setup, monitoring, updates and controller synchronization without adding a separate Bluetooth accessory.\u003c\/li\u003e\n\u003cli\u003eVE.Can and VE.Direct ports support wired integration with Victron GX devices, system displays and wider onboard power monitoring.\u003c\/li\u003e\n\u003cli\u003eVE.Can allows synchronized parallel operation with up to 25 charge controllers, useful when a vessel has multiple solar arrays.\u003c\/li\u003e\n\u003cli\u003eProtection covers PV reverse polarity, output short circuit and over-temperature conditions.\u003c\/li\u003e\n\u003cli\u003eProgrammable relay and remote on\/off terminals support integration with control logic, alarms or battery management systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis SmartSolar MPPT 150\/70 VE.Can is offered in two PV connection configurations. Both variants share the same 150\/70 controller platform, charging current, communication options and battery system support.\u003c\/p\u003e\u003cp\u003eThe main difference is how the solar array wiring connects to the controller. The Tr version uses PV terminals for hard-wired installation, while the MC4 version uses MC4 connectors for panel string connections.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSCC115070411: PV connection Tr. This version uses 35 mm² \/ AWG2 PV terminals, which suits installations where the solar wiring is landed directly inside the electrical compartment.\u003c\/li\u003e\n\u003cli\u003eSCC115070511: PV connection MC4. This version uses two pairs of MC4 connectors, which keeps the PV side aligned with common solar panel connector hardware and can simplify service access for plug-connected strings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the controller close enough to the battery bank to keep DC cable runs practical, while leaving space around the housing for ventilation and service access. The battery terminals accept 35 mm² \/ AWG2 cable, but final cable size, fuse placement and disconnects should match the vessel voltage, current, cable length and applicable marine electrical standards.\u003c\/p\u003e\u003cp\u003eThe PV array must be configured so open-circuit voltage stays within the controller limit in the coldest expected conditions. This is especially important on boats that use multiple panels in series, where voltage can rise above normal operating values on clear cold mornings.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe controller works with multi-stage adaptive charging and can be set up for common battery chemistries used on board, including lithium, AGM, gel and flooded batteries when configured correctly for the battery bank. Optional external sensing through compatible Victron devices can improve voltage and temperature awareness in systems where the controller is mounted away from the batteries.\u003c\/p\u003e\u003cp\u003eThe Tr model measures 185 x 250 x 95 mm, while the MC4 model measures 215 x 250 x 95 mm. The extra height on the MC4 version should be considered when mounting inside a locker, technical cabinet or behind an electrical panel.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis controller is a good match for vessels running larger solar arrays that need more than a small deck-panel regulator, especially cruising boats, workboats and fishing setups with house loads from refrigeration, electronics, lighting, pumps and communications equipment. It also fits Victron-based power systems where solar charging needs to be visible through Bluetooth, VE.Can, VE.Direct or a GX monitoring setup.\u003c\/p\u003e\u003cp\u003eBecause the enclosure ratings are intended for protected locations, it should be treated as electrical equipment for a dry technical area. A clean installation with strain relief, proper overcurrent protection and accessible disconnects will make inspection and future service much easier.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Tr","offer_id":52581989908661,"sku":"QBP925648-V1","price":414.8,"currency_code":"USD","in_stock":true},{"title":"MC4","offer_id":52581989941429,"sku":"QBP925648-V2","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1336249_qbp925648.webp?v=1780202157"},{"product_id":"qbp508563","title":"Victron Energy SmartSolar MPPT Solar Charge Controller, 250V, 12\/24\/36\/48V, Bluetooth","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SmartSolar MPPT 250\/60 and 250\/70 is a high-capacity solar charge controller range for charging 12 V, 24 V, and 48 V battery banks from a PV array. It uses MPPT tracking to harvest usable power from panels through changing light, partial shade, and moving shadows, which matters on boats where sails, antennas, rigging, and clouds can shift across the array during the day.\u003c\/p\u003e\u003cp\u003eThis range supports up to 250 V PV open-circuit voltage, with 60 A and 70 A charge-current options. It has Bluetooth built in for setup and monitoring through VictronConnect, plus VE.Direct for connection to GX devices, PCs, and wider Victron monitoring systems.\u003c\/p\u003e\u003cp\u003eFor marine installations, it is best suited to protected onboard locations such as an electrical locker, technical space, cabin utility area, or other dry interior mounting point. The enclosure is rated IP43 for electronic components and IP22 at the connection area, so it should not be installed where it will be exposed directly to washdowns, spray, or standing moisture.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAvailable in 60 A and 70 A charge-current versions for larger solar arrays on cruising boats, workboats, and off-grid marine power systems.\u003c\/li\u003e\n\u003cli\u003eSupports 12 V, 24 V, and 48 V battery banks with automatic voltage selection, with 36 V selection available through software setup.\u003c\/li\u003e\n\u003cli\u003e250 V maximum PV open-circuit voltage gives system designers more flexibility when arranging higher-voltage solar strings.\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth allows setup, charging profile adjustment, firmware updates, and live system checks through VictronConnect.\u003c\/li\u003e\n\u003cli\u003eVE.Direct port supports wired integration with compatible Victron GX devices, PCs, and monitoring hardware.\u003c\/li\u003e\n\u003cli\u003eProgrammable charging supports multi-stage adaptive charging, eight pre-programmed algorithms, or a user-defined charge algorithm.\u003c\/li\u003e\n\u003cli\u003eElectronic protection includes PV reverse polarity protection, output short-circuit protection, and over-temperature protection.\u003c\/li\u003e\n\u003cli\u003eFanless design with maximum efficiency of 99 percent keeps operation quiet and reduces moving parts inside the installation space.\u003c\/li\u003e\n\u003cli\u003eSupports synchronized parallel charging of up to 10 units over Bluetooth for systems with multiple charge controllers.\u003c\/li\u003e\n\u003cli\u003eRated for operation from -30 to +60 °C, with full rated output up to 40 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two configurations. The main differences are charge current and the PV input connection style.\u003c\/p\u003e\u003cp\u003eBoth variants share the same SmartSolar MPPT platform, Bluetooth setup and monitoring, VE.Direct communication, remote on-off input, programmable relay, adaptive charging logic, and 12 V, 24 V, or 48 V battery-bank support.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSCC125060321: 60 A charge current with MC4 PV connection. This version suits installations where the solar array wiring is already arranged around MC4 connectors and a 60 A controller capacity matches the planned charging system.\u003c\/li\u003e\n\u003cli\u003eSCC125070221: 70 A charge current with screw terminal PV connection. This version gives a higher charge-current rating and uses screw terminals for installers who prefer direct cable termination inside the controller wiring area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe controller sits between the solar array and the battery bank, regulating solar input into a controlled charging profile. Nominal PV power is rated up to 860 W at 12 V, 1720 W at 24 V, and 3440 W at 48 V for the 250\/60 version, and up to 1000 W at 12 V, 2000 W at 24 V, and 4000 W at 48 V for the 250\/70 version.\u003c\/p\u003e\u003cp\u003eThe PV voltage must exceed battery voltage by 5 V for the controller to start, then remain at least 1 V above battery voltage while operating. This is an important point when planning panel strings on a boat, especially where deck space limits panel count or where shading changes throughout the day.\u003c\/p\u003e\u003ch6\u003eInstallation and mounting\u003c\/h6\u003e\u003cp\u003eThe Tr screw-terminal model measures 185 x 250 x 95 mm, while the MC4 model measures 215 x 250 x 95 mm. Both weigh about 3 kg and use 35 mm² or AWG2 battery terminals, so cable routing, strain relief, overcurrent protection, and service access should be planned before mounting.\u003c\/p\u003e\u003cp\u003eMount the controller where it has ventilation and where the connection area stays protected from salt spray and direct water exposure. On boats, a dry electrical compartment close to the battery and solar cable runs usually makes the installation cleaner and easier to inspect later.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis SmartSolar range fits vessels with enough solar capacity to justify a higher-current MPPT controller, such as cruising sailboats, powerboats with large house loads, fishing boats with electronics and refrigeration, or liveaboard systems that rely on solar to reduce engine or shore-power charging time.\u003c\/p\u003e\u003cp\u003eIt is also a good match for owners building around the Victron ecosystem, since Bluetooth, VE.Direct, optional GX monitoring, and synchronized charging make it easier to keep solar charging visible and coordinated with the rest of the onboard power system.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"60 A \/ MC4","offer_id":52581993185461,"sku":"QBP508563-V1","price":0.0,"currency_code":"USD","in_stock":false},{"title":"70 A \/ Screw Terminal (Tr)","offer_id":52581993218229,"sku":"QBP508563-V2","price":478.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1336291_qbp508563.webp?v=1780202209"},{"product_id":"qbp322324","title":"Victron Energy SmartSolar MPPT 150\/85 VE.Can Solar Charge Controller, 150V, 85A, 12\/24\/36\/48V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SmartSolar MPPT 150\/85 VE.Can is a solar charge controller for larger onboard solar arrays feeding a 12V, 24V, 36V or 48V battery system. It supports up to 85A of charge current, a 150V maximum PV open circuit voltage, and nominal PV input of 1200W at 12V, 2400W at 24V, 3600W at 36V, and 4900W at 48V.\u003c\/p\u003e\u003cp\u003eThis controller is a strong fit for boats with meaningful solar capacity, such as cruising sailboats, fishing boats, expedition vessels, and workboats that need steady battery charging while away from shore power. MPPT charging helps the array keep producing useful current when light changes through the day, and the VE.Can interface makes it easier to integrate the charger into a larger Victron system with GX monitoring.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth supports setup, monitoring, and firmware updates through VictronConnect, while VE.Direct and VE.Can give installers options for wired system communication. The unit also includes a programmable relay, remote on\/off terminals, and protection for PV reverse polarity, output short circuit, and over temperature conditions.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e85A rated charge current for higher-output solar installations on 12V, 24V, 36V, or 48V battery banks.\u003c\/li\u003e\n\u003cli\u003e150V maximum PV open circuit voltage, with 145V start-up and operating maximum.\u003c\/li\u003e\n\u003cli\u003eNominal PV capacity of 1200W at 12V, 2400W at 24V, 3600W at 36V, and 4900W at 48V.\u003c\/li\u003e\n\u003cli\u003eVE.Can communication allows synchronized operation of up to 25 charge controllers in larger systems.\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth supports local configuration and monitoring through VictronConnect without a separate dongle.\u003c\/li\u003e\n\u003cli\u003eVE.Direct port supports wired connection to GX devices, PCs, and other compatible Victron monitoring equipment.\u003c\/li\u003e\n\u003cli\u003eMulti-stage adaptive charge algorithm with eight pre-programmed options and user-defined charging settings.\u003c\/li\u003e\n\u003cli\u003eProtection covers PV reverse polarity, output short circuit, and over temperature conditions.\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -30°C to +60°C, with full rated output up to 40°C.\u003c\/li\u003e\n\u003cli\u003eIP43 protection for electronic components and IP22 protection at the connection area, so the controller belongs in a dry, protected onboard location.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two PV connection configurations. The main difference is the solar input terminal style, while the 150\/85 VE.Can charging platform, communication options, and core electrical rating remain consistent across the range.\u003c\/p\u003e\u003cp\u003eThe Tr version uses larger screw terminals for installers who prefer field-terminated PV wiring, while the MC4 version uses plug-in MC4 solar connectors for arrays already built around that connector format.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSCC115085411 uses the Tr PV terminal configuration. This version suits installations where the solar wiring is brought into the controller through prepared conductors and secured directly at the unit.\u003c\/li\u003e\n\u003cli\u003eSCC115085511 uses the MC4 PV terminal configuration. This version suits arrays with MC4 leads and can reduce field wiring work at the controller when the rest of the solar wiring already uses MC4 connectors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe controller should be installed in a dry electrical space with ventilation and protection from direct spray. On a boat, that usually means an electrical locker, technical compartment, or protected equipment area rather than an exposed cockpit, deck, or wet engine-room location. The IP ratings are useful for protected marine spaces, but they do not make the connection area suitable for washdown exposure.\u003c\/p\u003e\u003cp\u003ePV voltage must exceed battery voltage by 5V for start-up, then remain at least 1V above battery voltage while operating. This matters when laying out solar panels in series or parallel, especially on boats where shading from masts, antennas, rails, hardtops, and fishing gear can change throughout the day.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe SmartSolar MPPT 150\/85 VE.Can can work as a single high-output solar charger or as part of a coordinated Victron energy system. VE.Can is helpful when multiple controllers need to charge together, and a GX device can bring system data into a central display or remote monitoring setup.\u003c\/p\u003e\u003cp\u003eBattery terminals accept up to 35 mm² or AWG2 cable, which gives installers room for proper conductor sizing on higher-current runs. The charge profile can be adjusted for the battery bank, including common marine battery types such as lithium, AGM, gel, and flooded lead-acid when the rest of the system is configured correctly.\u003c\/p\u003e\u003ch6\u003eMarine use and placement\u003c\/h6\u003e\u003cp\u003eThis controller is a practical match for vessels where solar is more than a small trickle-charge panel. It works well in systems that support refrigeration, lighting, electronics, pumps, and house loads while the boat is anchored, underway, or sitting away from shore power.\u003c\/p\u003e\u003cp\u003eFor best long-term service, mount it where cable runs are clean, airflow is not blocked, and the connection area can stay dry and accessible. In saltwater installations, careful cable support, corrosion control, and periodic inspection of terminals and connectors are just as important as choosing the right charge controller.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Tr","offer_id":52581994266805,"sku":"QBP322324-V1","price":453.05,"currency_code":"USD","in_stock":true},{"title":"MC4","offer_id":52581994299573,"sku":"QBP322324-V2","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1336365_qbp322324.webp?v=1780202231"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/solar-charge-controllers.oembed?page=2","provider":"Quality Boat Parts","version":"1.0","type":"link"}