{"title":"Semi Rigid Rub Rail","description":"","products":[{"product_id":"qbp431060","title":"TACO Marine Large SuproFlex Rub Rail, 2.5 in x 1 in, 100 ft, Co-Extruded Vinyl","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Large SuproFlex Rub Rail is a semi-rigid vinyl rub rail for replacing or upgrading hull protection on medium to large boats. This Large V11-9970 profile measures 2.5 in. x 1 in. and is supplied in 100 ft. lengths, giving installers enough material for a clean run around many center consoles, fishing boats, cruisers, and similar hulls.\u003c\/p\u003e\u003cp\u003eIts co-extruded construction combines a rigid backing with a softer front face, so the rail can follow the shape of the hull while still giving the boat a protective edge at docks, pilings, and alongside other vessels. Shock-absorbing channels help manage contact at the rub rail instead of transferring every bump straight to the hull joint.\u003c\/p\u003e\u003cp\u003eSuproFlex is a practical choice for refits because it needs no pre-forming and only minimal heating for tighter bends. That can make a noticeable difference when working around bows, transoms, and molded hull curves where traditional rigid rub rail can take more time and more hands to install.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLarge 2.5 in. x 1 in. SuproFlex profile suited to many medium and large boat rub rail replacements.\u003c\/li\u003e\n\u003cli\u003e100 ft. continuous length helps reduce seams for a cleaner perimeter installation.\u003c\/li\u003e\n\u003cli\u003eCo-extruded vinyl uses two hardness levels, with a rigid backing and softer front face for impact protection.\u003c\/li\u003e\n\u003cli\u003eShock-absorbing channels add protection where the hull is most likely to meet docks, pilings, and rafted boats.\u003c\/li\u003e\n\u003cli\u003eNo pre-forming is required, and only minimal heating is needed for tight bends during installation.\u003c\/li\u003e\n\u003cli\u003ePairs with TACO Marine V12-9980 Flex Chrome Insert, sold separately, for a finished insert channel.\u003c\/li\u003e\n\u003cli\u003eUses #10 screws at 4 in. on center for standard fastening layout.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis rub rail is offered in two color configurations for matching the look of the hull, deck joint, and existing trim.\u003c\/p\u003e\u003cp\u003eThe profile, 100 ft. length, insert compatibility, and screw spacing remain the same across these listed variants. The visible rub rail color is the main difference.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-9970WHA100D: Arctic White. This finish keeps the rail visually close to many white gelcoat hulls and gives the boat a clean replacement look after a rub rail refit.\u003c\/li\u003e\n\u003cli\u003eV11-9970BKA100-1: Black. This color gives the hull edge a stronger visual outline and works well when the boat already uses black trim, black hardware accents, or a darker rub rail.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis rail is made for installers who need a profile that can follow common hull shapes without the extra work of pre-forming. Minimal heat may still be useful around tighter bends, especially near the bow or molded corners, but the flexible SuproFlex body helps the rail sit cleanly along the hull-to-deck joint.\u003c\/p\u003e\u003cp\u003eFor a proper installation, plan the screw spacing before starting the run and confirm that the V12-9980 insert matches the finish and appearance you want. The insert is sold separately, so it should be selected as part of the full rub rail job rather than treated as an included item.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis Large SuproFlex rub rail fits boat owners and yards handling a full perimeter replacement, collision damage repair, or a cosmetic refresh where the existing rub rail is worn, faded, cracked, or no longer protecting the hull edge well. It makes sense for boats that spend time docking, rafting up, trailering, or working around pilings where the outer edge of the hull sees regular contact.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Arctic White","offer_id":52023071572149,"sku":"QBP431060-V7","price":0.0,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":52023071604917,"sku":"QBP431060-V3","price":805.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335304_qbp431060.jpg?v=1780191657"},{"product_id":"qbp441563","title":"TACO Marine Semi-Rigid Vinyl Rub Rail Kit, Continuous Coil","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Semi-Rigid Rub Rail Kit is a vinyl rub rail replacement range for boats that need hull-edge protection and a cleaner finished profile at the deck joint. These kits cover common refit needs on center consoles, skiffs, hybrids, and other small to mid-size boats, with profiles available in 30 ft, 50 ft, and 70 ft lengths.\u003c\/p\u003e\u003cp\u003eEach configuration uses a semi-rigid vinyl rub rail that can be formed around the hull in one continuous coil, helping reduce visible joints along the sheer line. Depending on the selected variant, the profile measures 1-7\/8 in. H x 3\/4 in. W, 1-1\/2 in. H x 3\/4 in. W, or 1-5\/8 in. H x 3\/4 in. W, so checking the existing rub rail height, width, and hull shape is important before ordering.\u003c\/p\u003e\u003cp\u003eThe semi-rigid construction gives the rail enough cushion for normal contact with docks and pilings while still handling tight radius bends with minimal heat. It is a practical choice for a boat owner replacing tired rail, covering an edge after hull work, or refreshing the boat’s side profile without switching to a metal rub rail system.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSemi-rigid vinyl construction gives cushioning at the hull edge during normal contact with docks, pilings, and trailer guides.\u003c\/li\u003e\n\u003cli\u003eContinuous coil format supports one-piece installation with fewer visible seams along the boat’s sheer line.\u003c\/li\u003e\n\u003cli\u003eAvailable in black and white profiles, with insert options that change the finished look of the rail.\u003c\/li\u003e\n\u003cli\u003eTight radius bends can be made with minimal heat, which helps during installation around curved bows and transom corners.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003cli\u003eProfile sizes and lengths vary by configuration, making it important to match the rail to the boat’s existing footprint before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis rub rail kit is offered in three configurations with different lengths, profile sizes, and color combinations. The variants are not just cosmetic, so the selected part should match both the boat’s required coverage length and the existing rub rail footprint.\u003c\/p\u003e\u003cp\u003eThe 30 ft black configuration is a no-insert style, while the 50 ft black configuration includes a black insert and the 70 ft white configuration uses a flexible chrome insert. The rub rail kit format, continuous coil approach, end caps, screws, and installation guide are consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-4135BKA30-3: 30 ft length, black color, no insert, 1-7\/8 in. H x 3\/4 in. W. This configuration suits shorter replacement runs where a black rub rail profile without a separate insert is needed.\u003c\/li\u003e\n\u003cli\u003eV11-9795BBK50D-2: 50 ft length, black rub rail with black insert, 1-1\/2 in. H x 3\/4 in. W. The black insert keeps the side profile visually uniform while still using an insert-style rail.\u003c\/li\u003e\n\u003cli\u003eV11-9811WCM70-2: 70 ft length, white rub rail with flexible chrome insert, 1-5\/8 in. H x 3\/4 in. W. The chrome insert gives the white rail a stainless-look accent while keeping the flexibility of a vinyl insert system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore installation, compare the new profile against the boat’s existing rub rail height, width, and mounting surface. A close footprint match helps cover old fastener locations and keeps the rail sitting correctly against the hull and deck joint.\u003c\/p\u003e\u003cp\u003eThe coil format is useful for refits because it lets the installer work around long sections of the boat without creating unnecessary breaks. On sharper bends, controlled heat may be used to help the rail follow the curve without forcing the material.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis kit is a good match for boat owners replacing cracked, faded, or damaged rub rail after years of docking, rafting up, or trailer use. It also fits refit work where the boat needs a cleaner edge treatment after paint, gelcoat repair, or hardware changes along the hull side.\u003c\/p\u003e\u003cp\u003eThe black versions blend well with darker trim and hardware, while the white and chrome version works well on boats where a lighter rub rail and brighter accent line match the existing finish.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter installation, rinse the rub rail with fresh water after saltwater use and clean it with mild boat soap when washing the hull. Avoid harsh solvents or aggressive abrasives, especially around insert areas, since they can affect the finish and make routine cleaning harder over time.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRub rail coil\u003c\/li\u003e\n\u003cli\u003eInsert for configurations supplied with an insert\u003c\/li\u003e\n\u003cli\u003eEnd caps\u003c\/li\u003e\n\u003cli\u003eScrews\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"30-Inch \/ Black","offer_id":52023089594549,"sku":"QBP441563-V1","price":340.99,"currency_code":"USD","in_stock":true},{"title":"50-Inch \/ Black\/Black","offer_id":52023089627317,"sku":"QBP441563-V7","price":519.99,"currency_code":"USD","in_stock":true},{"title":"70-Inch \/ White\/Chrome","offer_id":52023089660085,"sku":"QBP441563-V0","price":727.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335396_qbp441563.webp?v=1780191702"},{"product_id":"qbp446533","title":"TACO Marine SuproFlex Medium Rub Rail Kit, 2 in x 29\/32 in, Co-Extruded Vinyl","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine SuproFlex Medium Rub Rail Kit is a semi-rigid vinyl rub rail kit for medium boats that need hull-side protection with a clean finished edge. It measures 2 inches high by 29\/32 inch wide and is offered in 60-foot and 80-foot kit lengths, giving boat owners and installers options for matching the run around the hull.\u003c\/p\u003e\u003cp\u003eSuproFlex uses co-extruded vinyl with two hardness levels, pairing a rigid backing with a softer front face that helps absorb everyday contact from docks, pilings, and rafting alongside other boats. The profile comes in a continuous coil, so it can follow most hull shapes without pre-forming and with only minimal heat needed for bends.\u003c\/p\u003e\u003cp\u003eThis medium kit is a practical match for center consoles, bay boats, and similar boats in the 22 to 30-foot range where a full rub rail replacement or clean refit is needed. It is also predrilled for fasteners, with #10 screws spaced 4 inches on center, which helps keep installation layout consistent along the hull.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-inch by 29\/32-inch SuproFlex medium rub rail profile for rub rail replacement and refit work on many mid-size boats.\u003c\/li\u003e\n\u003cli\u003eCo-extruded vinyl construction combines a rigid backing with a softer front face for impact absorption along the hull edge.\u003c\/li\u003e\n\u003cli\u003eShock-absorbing channels help manage dock contact, trailer handling, and light side impacts during normal boat use.\u003c\/li\u003e\n\u003cli\u003eContinuous coil format reduces joints and helps the rail follow curved hull sections with less installation work.\u003c\/li\u003e\n\u003cli\u003eNo pre-forming required, with minimal heat needed for bends during fitting.\u003c\/li\u003e\n\u003cli\u003ePredrilled for #10 fasteners at 4-inch centers for cleaner spacing during installation.\u003c\/li\u003e\n\u003cli\u003ePairs with the included V12-0307 insert, with insert color matched to the selected variant.\u003c\/li\u003e\n\u003cli\u003eIncludes stainless-steel end caps and screws for a complete rub rail kit installation.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis SuproFlex Medium Rub Rail Kit is offered in multiple configurations so the rail length and visible color can be matched to the boat and the refit plan.\u003c\/p\u003e\u003cp\u003eThe profile size, SuproFlex construction, predrilled fastener layout, included insert family, stainless-steel end caps, screws, USA manufacture, and 5-year limited warranty are consistent across these variants. The differences are the kit length, rub rail color, and insert color used with the selected finish.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-9990BBK60-2: Black, 60-inch length option. This version uses a black rub rail with a Flex Chrome insert, giving the hull edge a darker base with a bright accent line.\u003c\/li\u003e\n\u003cli\u003eV11-9990WCM60-2: White, 60-inch length option. This version uses a Frosty White rub rail with a Flex Chrome insert, a common look for boats with white gelcoat and bright trim.\u003c\/li\u003e\n\u003cli\u003eV11-9990BBK80-2: Black, 80-inch length option. This version keeps the black rub rail and Flex Chrome insert combination while allowing more length for a larger perimeter run.\u003c\/li\u003e\n\u003cli\u003eV11-9990GRD80-2: Grey, 80-inch length option. This version uses a gray rub rail with a gray insert for a more uniform finish along the hull side.\u003c\/li\u003e\n\u003cli\u003eV11-9990WCM80-2: White, 80-inch length option. This version uses a Frosty White rub rail with a Flex Chrome insert and provides the longer kit length for boats that need the additional run.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eFor a clean installation, the old rail and fasteners should be removed, the mounting surface cleaned, and the new SuproFlex coil worked around the hull before final fastening. Because the rail is flexible and does not need pre-forming, it is easier to manage around common bow and transom curves than many traditional vinyl rub rails.\u003c\/p\u003e\u003cp\u003eThe predrilled layout helps maintain even fastener spacing, but the installer should still confirm alignment, end cap placement, and insert seating before the final pass. As with any rub rail replacement, the selected kit length should be checked against the boat’s actual perimeter, including any allowance needed for trimming and end finishing.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis kit suits owners restoring worn rub rail, repairing impact-damaged trim, or refreshing the look of a center console, bay boat, or similar hull. It is especially useful where the boat sees regular dockside contact, raft-ups, trailer loading, or tight marina handling.\u003c\/p\u003e\u003cp\u003eThe finish options make it easier to keep the replacement close to the boat’s existing style. Black and Frosty White versions include a Flex Chrome insert for a brighter trim line, while the gray version keeps the insert color matched to the rail for a subtler look.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSuproFlex medium rub rail coil in the selected color and length\u003c\/li\u003e\n\u003cli\u003eV12-0307 insert in the color supplied with the selected variant\u003c\/li\u003e\n\u003cli\u003eStainless-steel end caps\u003c\/li\u003e\n\u003cli\u003eScrews\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Black \/ 60-Inch","offer_id":52023145038005,"sku":"QBP446533-V7","price":720.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 60-Inch","offer_id":52023145070773,"sku":"QBP446533-V1","price":793.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 80-Inch","offer_id":52023145103541,"sku":"QBP446533-V6","price":901.99,"currency_code":"USD","in_stock":true},{"title":"Grey \/ 80-Inch","offer_id":52023145136309,"sku":"QBP446533-V5","price":1000.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 80-Inch","offer_id":52023145169077,"sku":"QBP446533-V9","price":1000.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335287_qbp446533.jpg?v=1780191794"},{"product_id":"qbp731305","title":"TACO Marine Flexible Vinyl Trim, 3\/8 in Opening, 5\/8 in Width","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Flex Trim V30-1312 is a flexible PVC trim made to cover unfinished boat edges with a 3\/8 inch opening and 5\/8 inch width. It is used where a clean edge finish is needed around fiberglass panels, hatches, cockpit liners, consoles, interior panels, pontoon areas, or other trim edges that follow a curve.\u003c\/p\u003e\u003cp\u003eThe trim has individual internal aluminum clips with a gripping tongue, helping it hold onto the edge while still allowing the PVC body to follow contours and radius changes. It is available in 25 ft rolls for smaller jobs and a 250 ft roll for larger refit, production, or multi-area installations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3\/8 inch opening fits compatible unfinished edges where a finished trim line is needed.\u003c\/li\u003e\n\u003cli\u003e5\/8 inch trim width gives the edge a clean finished look without adding bulky profile height.\u003c\/li\u003e\n\u003cli\u003eFlexible PVC body follows curves, corners, and changing contours on boat interiors and exterior trim areas.\u003c\/li\u003e\n\u003cli\u003eIndividual internal aluminum clips and gripping tongue help the trim seat securely on the edge.\u003c\/li\u003e\n\u003cli\u003eBlack and white color options support common boat trim, liner, console, and deck color schemes.\u003c\/li\u003e\n\u003cli\u003e25 ft and 250 ft length options cover both small replacement jobs and larger installation runs.\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Flex Trim is offered in multiple configurations based on roll length and color. The 3\/8 inch opening and 5\/8 inch trim width are consistent across the listed variants.\u003c\/p\u003e\u003cp\u003eThe shorter rolls suit localized edge finishing and replacement work, while the longer roll supports larger projects where continuous trim runs or repeated installations are needed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV30-1312B25-1: 25 ft length, black. This option works well where a darker trim line matches consoles, black hardware, rub rail details, or darker panel edges.\u003c\/li\u003e\n\u003cli\u003eV30-1312W25-1: 25 ft length, white. This option suits smaller repairs or trim replacement on white fiberglass, liners, hatches, and cockpit areas.\u003c\/li\u003e\n\u003cli\u003eV30-1312W250: 250 ft length, white. This longer roll is practical for refits, shop use, or installations that need the same white trim across several sections of the boat.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore installation, confirm that the edge thickness matches the 3\/8 inch opening. The trim is meant to be pressed onto a compatible unfinished edge, with the internal clip and gripping tongue helping it stay in position as it follows the shape of the surface.\u003c\/p\u003e\u003cp\u003eFor the cleanest result, plan the run before cutting, especially around curves and corners. Cut only after checking the full path, then finish the end neatly so it sits cleanly against the adjoining trim, panel, or corner detail.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis trim is a practical match for boat owners, builders, and repair shops cleaning up exposed edges after panel work, upholstery changes, hatch repairs, pontoon updates, or cockpit and cabin refinishing. It is especially useful where a rigid trim would be harder to work around radius changes.\u003c\/p\u003e\u003cp\u003eBecause it covers rough or unfinished edges, it also helps reduce snag points around areas that passengers, gear, lines, or cushions may contact during normal use on board.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter installation, clean the trim with mild boat soap and fresh water as part of normal washdowns. Avoid harsh solvents or abrasive tools that can mark PVC or dull the surface finish over time.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"25’ \/ Black","offer_id":52581949800629,"sku":"QBP731305-V1","price":98.99,"currency_code":"USD","in_stock":false},{"title":"25’ \/ White","offer_id":52581949833397,"sku":"QBP731305-V2","price":98.99,"currency_code":"USD","in_stock":true},{"title":"250' \/ White","offer_id":52581949866165,"sku":"QBP731305-V3","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335530_qbp731305.jpg?v=1780201664"},{"product_id":"qbp778178","title":"TACO Marine Flexible Vinyl Rub Rail Insert, 3\/4 in x 1\/2 in","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V12-0307 is a 3\/4\" x 1\/2\" flexible rub rail insert made for finishing and protecting compatible boat rub rail profiles. It installs as a continuous coil insert, giving the rub rail a clean finished face while helping cover fasteners along the hull-to-deck joint.\u003c\/p\u003e\u003cp\u003eThis insert is offered in multiple lengths and finishes, including chrome-style and solid-color options. The Flex Chrome versions give the look of stainless steel without the labor, weight, or corrosion concerns of metal trim, while the color options help match existing rub rail systems on center consoles, cruisers, runabouts, and other fiberglass boats.\u003c\/p\u003e\u003cp\u003eThe insert has been tested for salt spray, shock, accelerated weathering, heat and humidity cycling, and freeze cycling. It is a practical replacement choice when the original insert is faded, missing, scuffed, or no longer seated properly in the rub rail channel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3\/4\" height and 1\/2\" width for matching compatible TACO Marine rub rail profiles.\u003c\/li\u003e\n\u003cli\u003eFlexible insert construction supports installation from a coil instead of rigid straight sections.\u003c\/li\u003e\n\u003cli\u003eAvailable in 60', 80', and 88' lengths to suit different hull sizes and replacement jobs.\u003c\/li\u003e\n\u003cli\u003eFinish options include Chrome, Black Pearl, Gray, Black, Arctic White, and Frosty White.\u003c\/li\u003e\n\u003cli\u003eFlex Chrome finish gives a stainless-steel appearance without exposed metal fasteners that can rust.\u003c\/li\u003e\n\u003cli\u003eNo-tool installation helps with refit work at the dock, in the yard, or during routine rub rail maintenance.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and covered by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe V12-0307 range varies by coil length and color or finish. Available lengths include 60', 80', and 88', with finish options that range from chrome-style trim to neutral solid colors for matching existing hull and deck details.\u003c\/p\u003e\u003cp\u003eThe 3\/4\" x 1\/2\" insert size remains consistent across the listed variants, so selection mainly comes down to the length needed for the run and the finish that matches the boat’s rub rail appearance.\u003c\/p\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, measure the existing insert and confirm that the rub rail channel accepts a 3\/4\" x 1\/2\" flexible insert. Rub rail inserts are profile-specific, so the overall boat length alone is not enough to confirm fit.\u003c\/p\u003e\u003cp\u003eFor replacement work, remove a short section of the old insert and compare its height, width, and seating shape with this profile. Planning the run before installation also helps avoid coming up short around the transom, bow, or tight radius areas.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis insert is well suited for owners restoring the look of a worn rub rail, replacing missing trim after dock impact, or refreshing the boat’s exterior during a larger refit. The continuous coil format keeps the finished run cleaner than short sections and helps maintain a tidy line around the hull.\u003c\/p\u003e\u003cp\u003eIt is a good match for marine environments where the rub rail sees sun, spray, washdowns, and routine contact with docks, fenders, and pilings. The non-metal insert construction also reduces the concern of corrosion staining around the rub rail face.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"60' \/ Chrome","offer_id":52581985321141,"sku":"QBP778178-V1","price":0.0,"currency_code":"USD","in_stock":false},{"title":"80' \/ Chrome","offer_id":52581985353909,"sku":"QBP778178-V2","price":265.99,"currency_code":"USD","in_stock":true},{"title":"80' \/ Black Pearl","offer_id":52581985386677,"sku":"QBP778178-V3","price":0.0,"currency_code":"USD","in_stock":false},{"title":"88' \/ Gray","offer_id":52581985419445,"sku":"QBP778178-V4","price":0.0,"currency_code":"USD","in_stock":false},{"title":"88' \/ Black","offer_id":52581985452213,"sku":"QBP778178-V5","price":0.0,"currency_code":"USD","in_stock":false},{"title":"88' \/ Arctic White","offer_id":52581985484981,"sku":"QBP778178-V6","price":0.0,"currency_code":"USD","in_stock":false},{"title":"88' \/ Frosty White","offer_id":52581985517749,"sku":"QBP778178-V7","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335534_qbp778178.png?v=1780202084"},{"product_id":"qbp459400","title":"TACO Marine Flexible Vinyl Rub Rail Insert, 1-3\/16 in x 1\/2 in","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V12-4144 is a flexible vinyl rub rail insert measuring 1-3\/16 in x 1\/2 in for restoring the finished face of compatible boat rub rails. It covers exposed rub rail fasteners and gives the rail a cleaner edge while adding a soft PVC contact surface where the boat may meet docks, pilings, trailers, or another vessel.\u003c\/p\u003e\u003cp\u003eThis insert is a practical replacement when the original rub rail insert is cracked, faded, missing, or pulled out of the track. Match the 1-3\/16 in height and 1\/2 in width to the existing rub rail profile before ordering, and confirm the required length around the hull so the installation can be completed with as few seams as possible.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlexible vinyl insert for compatible rub rail profiles that accept a 1-3\/16 in x 1\/2 in insert.\u003c\/li\u003e\n\u003cli\u003eSoft PVC construction helps cushion light impact at the rub rail contact point.\u003c\/li\u003e\n\u003cli\u003eCovers rub rail fasteners for a finished look along the hull side.\u003c\/li\u003e\n\u003cli\u003eAvailable in 50 ft, 70 ft, and 250 ft lengths to suit partial repairs or full rub rail insert replacement.\u003c\/li\u003e\n\u003cli\u003eColor options include Black and Arctic White, depending on the selected length.\u003c\/li\u003e\n\u003cli\u003eFlexible form supports installation around curved hull sections without heat in many typical replacement jobs.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple length and color configurations. The insert profile remains 1-3\/16 in x 1\/2 in across these variants, while the roll length and finish color change by part number.\u003c\/p\u003e\u003cp\u003eBlack is available in shorter service lengths and a long 250 ft length, while Arctic White is available in a 70 ft length for boats that need a lighter rub rail accent.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV12-4144BKA50-1: 50 ft length, Black. This length works well for smaller replacement runs, localized repairs, or boats that do not need a full long coil.\u003c\/li\u003e\n\u003cli\u003eV12-4144BKA70-1: 70 ft length, Black. The 70 ft coil gives more continuous coverage for many full-side or full-perimeter replacement jobs.\u003c\/li\u003e\n\u003cli\u003eV12-4144BKA250: 250 ft length, Black. This longer roll suits shop use, refit work, or larger projects where longer continuous runs help reduce seams.\u003c\/li\u003e\n\u003cli\u003eV12-4144WHA70: 70 ft length, Arctic White. The Arctic White finish fits boats where a lighter insert better matches the hull, deck, or existing trim.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eFit depends on the rub rail channel, not only the boat brand or model year. Before installation, compare the old insert cross-section with the 1-3\/16 in x 1\/2 in profile and inspect the rail track for bent sections, old sealant, broken fasteners, or debris that could keep the new insert from seating properly.\u003c\/p\u003e\u003cp\u003eFor a cleaner result, lay out the run before pressing the insert into the rail and avoid stretching the vinyl during installation. On replacement work, a continuous length can help reduce visible joints, especially along exposed hull sides where the rub rail is most noticeable.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis insert is a good match for owners restoring the appearance of an aging rub rail, replacing damaged insert after dock contact, or refreshing trim during a larger hull and deck refit. It is also useful for service yards that need a flexible replacement insert in common marine colors and practical coil lengths.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"50' \/ Black","offer_id":52581987877045,"sku":"QBP459400-V1","price":0.0,"currency_code":"USD","in_stock":false},{"title":"70' \/ Black","offer_id":52581987909813,"sku":"QBP459400-V2","price":224.99,"currency_code":"USD","in_stock":true},{"title":"250' \/ Black","offer_id":52581987942581,"sku":"QBP459400-V3","price":0.0,"currency_code":"USD","in_stock":false},{"title":"70' \/ Arctic White","offer_id":52581987975349,"sku":"QBP459400-V4","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335699_qbp459400.jpg?v=1780202122"},{"product_id":"qbp234773","title":"TACO Marine Flexible Vinyl Rub Rail, 1-7\/8 x 1-1\/8 in, Black","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V11-2423 is a flexible vinyl rub rail for replacing or upgrading the protective rail along a boat hull-to-deck joint. It has a black 1-7\/8 in. x 1-1\/8 in. profile and is offered here in 50 ft. and 70 ft. lengths, giving installers practical options for different hull sizes and repair scopes.\u003c\/p\u003e\u003cp\u003eThis rub rail comes in a continuous coil, which helps reduce visible seams around the boat and makes it easier to follow curves at the bow, stern corners, and sheer line. The flexible vinyl has a soft-durometer feel that helps cushion normal contact with docks, pilings, and other close-quarters surfaces.\u003c\/p\u003e\u003cp\u003eIt is a good match for boat owners, yards, and installers working on center consoles, cruisers, skiffs, bay boats, and similar fiberglass boats where a black flexible rub rail profile is needed for impact protection and a clean finished edge.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBlack flexible vinyl rub rail with a 1-7\/8 in. x 1-1\/8 in. profile for hull-side protection and a finished perimeter edge.\u003c\/li\u003e\n\u003cli\u003eContinuous coil format helps keep the installation cleaner by reducing joints and breaks along long runs.\u003c\/li\u003e\n\u003cli\u003eSoft-durometer vinyl gives the rail a cushioning effect during normal dockside contact.\u003c\/li\u003e\n\u003cli\u003eTight-radius bends can be made with minimal heat, which helps when fitting curves at the bow and transom corners.\u003c\/li\u003e\n\u003cli\u003eWorks with TACO Marine V12-0003 flexible vinyl insert and F90-0001 end caps for a complete rub rail installation.\u003c\/li\u003e\n\u003cli\u003eUses #10 countersunk flat head screws, which are sold separately.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis rub rail is offered in multiple length configurations so the same profile can be matched to different boat sizes or repair needs.\u003c\/p\u003e\u003cp\u003eThe length changes between variants. The black flexible vinyl profile, insert compatibility, end cap compatibility, and screw type remain consistent across these listed configurations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-2423BKA50-1, Length 50'. This length suits shorter perimeter runs, partial replacements, or smaller boats where a 50 ft. coil covers the required rail path.\u003c\/li\u003e\n\u003cli\u003eV11-2423BKA70-1, Length 70'. This length gives more material for larger hulls or installations that need a longer continuous run with fewer breaks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, compare the 1-7\/8 in. x 1-1\/8 in. profile against the existing rub rail footprint on the boat. Check the height, projection, insert style, and screw line so the new rail covers the old mounting marks and follows the hull-to-deck joint correctly.\u003c\/p\u003e\u003cp\u003eThe matching insert is TACO Marine V12-0003 and the matching end cap is F90-0001. Those parts matter when the installation needs a finished appearance at the rail ends or when the existing insert is cracked, faded, or missing.\u003c\/p\u003e\u003ch6\u003eInstallation notes\u003c\/h6\u003e\u003cp\u003eDry-fit the rail before fastening, especially around tight curves and corners. Minimal heat can help the vinyl take tighter bends, but the rail should be worked gradually so the profile stays even and the insert channel remains clean.\u003c\/p\u003e\u003cp\u003eUse #10 countersunk flat head screws and follow a consistent fastening pattern along the rail. On older boats, inspect the original screw holes and substrate before installation, since loose fasteners, wet core material, or damaged laminate should be corrected before the new rub rail is fitted.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis rub rail is useful for refresh projects where the existing rail is sun-faded, split, flattened from dock contact, or no longer holds the insert securely. It also fits full refit work where the boat needs a clean black perimeter rail after hull repairs, paint work, or gelcoat restoration.\u003c\/p\u003e\u003cp\u003eFor fishing boats, family runabouts, and coastal cruisers that spend time against floating docks, pilings, or rafted-up boats, the flexible vinyl profile adds a practical layer of protection without changing the basic layout of the boat.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWash the rail with fresh water and mild boat soap after saltwater use. Avoid harsh solvents that can attack vinyl or leave the surface looking uneven.\u003c\/p\u003e\u003cp\u003eDuring seasonal service, check the insert, end caps, and fasteners. A tight rail with a seated insert protects the edge of the boat more effectively and keeps the installation looking clean over time.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"50'","offer_id":52581988073653,"sku":"QBP234773-V1","price":480.99,"currency_code":"USD","in_stock":true},{"title":"70'","offer_id":52581988106421,"sku":"QBP234773-V2","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335654_qbp234773.jpg?v=1780202125"},{"product_id":"qbp074918","title":"TACO Marine Tube Style Flexible Vinyl Rub Rail Insert, 1\/2 in Dia","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V12-0003 is a 1\/2 inch tube style flexible vinyl insert for compatible boat rub rail systems. It fits into the rub rail channel to help cover the fasteners and add a softer contact surface along the hull edge, which is useful around docks, pilings, slips, and raft-ups where rub rail contact is common.\u003c\/p\u003e\u003cp\u003eThis insert is made from soft PVC and is used with flexible rub rail profiles. It is a match for TACO Marine flexible rub rails V11-2423, V11-3447, and V11-4014, so it is best suited for replacing worn insert on an existing compatible rail or completing a rub rail installation where those profiles are being used.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1\/2 inch tube style profile for compatible flexible rub rail channels.\u003c\/li\u003e\n\u003cli\u003eSoft PVC construction adds a cushion effect to help absorb everyday contact at the rail.\u003c\/li\u003e\n\u003cli\u003eCovers rub rail fasteners for a cleaner finished look along the hull side.\u003c\/li\u003e\n\u003cli\u003eFits TACO Marine flexible rub rail profiles V11-2423, V11-3447, and V11-4014.\u003c\/li\u003e\n\u003cli\u003eAvailable in Black and Arctic White finishes to match common rub rail and hull trim combinations.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis insert is offered in multiple length and finish configurations for replacement jobs, repairs, and full rub rail runs.\u003c\/p\u003e\u003cp\u003eThe tube style, 1\/2 inch insert profile is consistent across the range. The length and color finish change by variant, so the correct option depends on the rail length being serviced and the visual match needed for the boat.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV12-0003BKA50-1: 50' length in Black. This size works well for shorter replacement sections or smaller boats where a full long coil is not needed.\u003c\/li\u003e\n\u003cli\u003eV12-0003BKA70-1: 70' length in Black. The longer coil gives more coverage for extended rail runs while keeping the same black finish.\u003c\/li\u003e\n\u003cli\u003eV12-0003WHA50-1: 50' length in Arctic White. This finish gives the rub rail a lighter trim appearance and suits boats with white or light-colored rail details.\u003c\/li\u003e\n\u003cli\u003eV12-0003BKA250: 250' length in Black. This bulk length is useful when servicing longer perimeter runs or multiple sections with the same black insert.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eConfirm the existing rub rail profile before ordering, especially on older boats or boats with previous repairs. The insert must match the channel shape and size, not just the visible color, and this 1\/2 inch tube style insert is intended for the compatible flexible rub rail profiles listed above.\u003c\/p\u003e\u003cp\u003eDuring installation, the insert should not be stretched into place. Stretching can make the vinyl pull back after it relaxes, leaving gaps at corners, ends, or joints. A steady installation along a clean rail channel helps the insert sit evenly and keeps the finished edge looking consistent.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis insert is a practical replacement part for boats with rubbed, cracked, faded, or missing rub rail insert. It is also useful during rub rail refits when the outer rail is being reused but the visible insert needs to be renewed for a cleaner edge and better contact surface.\u003c\/p\u003e\u003cp\u003eIt is a good match for boat owners, yards, and installers working on flexible TACO Marine rub rail systems where the fastener cover and impact cushion need to be restored without replacing the entire rail assembly.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"50' \/ Black","offer_id":52581988630709,"sku":"QBP074918-V1","price":87.99,"currency_code":"USD","in_stock":true},{"title":"70' \/ Black","offer_id":52581988663477,"sku":"QBP074918-V2","price":0.0,"currency_code":"USD","in_stock":false},{"title":"50' \/ Arctic White","offer_id":52581988696245,"sku":"QBP074918-V3","price":0.0,"currency_code":"USD","in_stock":false},{"title":"250' \/ Black","offer_id":52581988729013,"sku":"QBP074918-V4","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335735_qbp074918.jpg?v=1780202135"},{"product_id":"qbp693019","title":"TACO Marine SuproFlex Semi-Rigid Rub Rail Kit, 2 in x 1-1\/4 in, Flexible Vinyl Overlay Insert","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine SuproFlex Semi-Rigid Medium is a rub rail kit for replacing or upgrading the protective rail around smaller boat hulls, with a 2\" height and 1-1\/4\" width profile. It uses a semi-rigid vinyl backing with a firmer 95-durometer front and a flexible vinyl overlay insert, giving the hull edge a finished look while helping absorb routine contact at docks, slips, trailers, and rafting points.\u003c\/p\u003e\u003cp\u003eThis kit comes in one continuous coil in 60' or 80' lengths, depending on the selected variant. The continuous coil format helps reduce joints around the hull, while the predrilled profile, minimal heating requirement, and no pre-forming requirement make it practical for refits on center consoles, bay boats, bass boats, and similar boats in the 15 to 22-foot range.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2\" x 1-1\/4\" medium SuproFlex profile for hull edge protection on smaller powerboats.\u003c\/li\u003e\n\u003cli\u003eCo-extruded construction combines a semi-rigid vinyl back with a 95-durometer front face.\u003c\/li\u003e\n\u003cli\u003eShock-absorbing channels help manage everyday impact from docks, pilings, and close-quarters handling.\u003c\/li\u003e\n\u003cli\u003eFlexible vinyl overlay insert is included and fits this SuproFlex profile.\u003c\/li\u003e\n\u003cli\u003eContinuous 60' or 80' coil options reduce the need for extra seams around the boat.\u003c\/li\u003e\n\u003cli\u003ePredrilled rail saves layout time when fastening the profile to the hull.\u003c\/li\u003e\n\u003cli\u003eRequires no pre-forming and only minimal heating during installation.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis SuproFlex rub rail kit is offered in multiple configurations based on length, rub rail color, and insert color.\u003c\/p\u003e\u003cp\u003eThe 60' option is available in black with a black insert, while the 80' length is available in black with a black insert or Arctic White with an Arctic White insert. The 2\" x 1-1\/4\" SuproFlex profile, flexible overlay insert style, and included stainless-steel end caps and screws remain consistent across the listed variants.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-9993BBK60-2: 60' length, black rub rail, black insert. This length suits smaller hulls where a 60' continuous coil is enough to run the perimeter without buying excess material.\u003c\/li\u003e\n\u003cli\u003eV11-9993BBK80-2: 80' length, black rub rail, black insert. The longer black configuration works for boats that need more coverage while keeping a dark trim line around the hull.\u003c\/li\u003e\n\u003cli\u003eV11-9993WWK80-2: 80' length, Arctic White rub rail, Arctic White insert. The white configuration keeps the rub rail visually close to light gelcoat and deck styling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eMeasure the full perimeter of the existing rub rail path before selecting a length, including curves around the bow and stern corners. The rail is supplied as a continuous coil, so handling the coil with two people makes installation cleaner and helps keep tension even as it is fastened around the hull.\u003c\/p\u003e\u003cp\u003eThe predrilled profile helps with fastener placement, and the minimal heating requirement is useful when working around curves. As with any rub rail replacement, the hull edge should be clean and the old fasteners, sealant, and damaged backing material should be removed before the new rail is fitted.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis kit is a strong match for owners replacing a worn or cracked rub rail on center console fishing boats, bay boats, bass boats, and other small craft that see regular dock contact. It is also useful during cosmetic refits when the goal is to refresh the hull line while keeping a practical impact buffer in place.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSuproFlex semi-rigid rub rail coil\u003c\/li\u003e\n\u003cli\u003eFlexible vinyl overlay insert\u003c\/li\u003e\n\u003cli\u003eStainless-steel end caps\u003c\/li\u003e\n\u003cli\u003eScrews\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"60' \/ Black \/ Black","offer_id":52581989286069,"sku":"QBP693019-V1","price":683.79,"currency_code":"USD","in_stock":true},{"title":"80' \/ Black \/ Black","offer_id":52581989318837,"sku":"QBP693019-V2","price":837.12,"currency_code":"USD","in_stock":true},{"title":"80' \/ Arctic White \/ Arctic White","offer_id":52581989351605,"sku":"QBP693019-V3","price":883.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335423_qbp693019.webp?v=1780202143"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/semi-rigid-rub-rail.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}