{"title":"Rub Rail Parts","description":"","products":[{"product_id":"qbp923975","title":"TACO Marine Weather Seal Tape, 10 ft, 3\/8 in H, 5\/8 in W, Black","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V30-0109B10-1 is a black weather seal tape for sealing hatches, live wells, exterior doors, instrument covers, electronic boxes, access compartments, windows, and windshield areas on a boat. It measures 10' long x 5\/8\" wide x 3\/8\" high, giving you a practical strip size for small sealing jobs, replacement work, and noise reduction around lids or panels.\u003c\/p\u003e\u003cp\u003eThis tape uses a flexible sponge rubber construction with a medium closed-cell density and a heavy-duty self-adhesive backing. It helps reduce leaks, rattling, vibration, and shock where panels meet frames, especially in areas exposed to spray, sunlight, temperature swings, and regular washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10' length with a 5\/8\" width and 3\/8\" height for boat hatches, doors, compartments, and covers.\u003c\/li\u003e\n\u003cli\u003eBlack weather seal tape that blends neatly with many deck fittings, hatch frames, and access panels.\u003c\/li\u003e\n\u003cli\u003eFlexible sponge rubber with medium closed-cell density helps block water intrusion and reduce rattling.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty self-adhesive backing supports cleaner installation without separate mechanical fasteners.\u003c\/li\u003e\n\u003cli\u003eHelps absorb shock and vibration where lids, panels, or doors close against a hard surface.\u003c\/li\u003e\n\u003cli\u003eSuitable for live wells, exterior doors, instrument covers, electronic boxes, access compartments, windows, and windshield areas.\u003c\/li\u003e\n\u003cli\u003eResists water absorption, sunlight damage, and temperature extremes common in marine environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the tape on a clean, dry surface so the adhesive can make full contact with the mounting area. Old adhesive, wax, salt residue, oil, and loose paint should be removed before application. Press the strip firmly along the full length, especially around corners and ends, to help the seal sit evenly against the mating surface.\u003c\/p\u003e\u003cp\u003eFor hatches, access doors, and electronics covers, check the closing pressure after installation. The seal should compress enough to reduce water entry and rattling without forcing the latch or hinge out of alignment.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis weather seal is a useful match for boat owners replacing worn gasket material around compartments, small doors, live wells, and protective covers. It also works well for quieting lids and panels that chatter underway, especially on fishing boats, center consoles, runabouts, pontoons, and cruisers that see spray, vibration, and regular deck washing.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023119249589,"sku":"QBP923975","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331276_qbp923975.jpg?v=1780191737"},{"product_id":"qbp874311","title":"TACO Marine Weather Seal Tape, 10 ft, 3\/16 in x 3\/8 in, Black","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V30-0113B10-1 is a black 10 ft weather seal tape for sealing boat lids, doors, covers, and small compartments where spray, vibration, and rattling can become a problem. It uses a sponge rubber profile with adhesive backing, making it a practical replacement or upgrade for live wells, exterior access doors, instrument covers, and electronic boxes.\u003c\/p\u003e\u003cp\u003eThis tape is made for compression sealing on marine surfaces that see sun, water, temperature swings, and regular movement. It helps cushion contact points, reduce rattles, and limit water intrusion in areas where a narrow gasket strip is the right fit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10 ft black weather seal tape for marine lids, doors, covers, live wells, and small access panels.\u003c\/li\u003e\n\u003cli\u003eMedium closed-cell sponge rubber helps create a cushioned seal while reducing vibration and rattling.\u003c\/li\u003e\n\u003cli\u003eSelf-adhesive backing keeps installation straightforward on clean, dry mounting surfaces.\u003c\/li\u003e\n\u003cli\u003eHelps protect covered areas from water intrusion, spray, sunlight exposure, and temperature changes.\u003c\/li\u003e\n\u003cli\u003eUseful for instrument covers and electronic boxes where a softer gasket strip can help protect against movement and deck-level moisture.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eClean the mounting surface before applying the tape, removing old adhesive, wax, oil, salt, and loose material. A dry surface gives the adhesive the best chance to bond evenly, especially around live well lids and exterior doors that are handled often.\u003c\/p\u003e\u003cp\u003eTest the closing action before final placement. The seal should compress enough to close the gap without forcing the latch, hinge, or cover out of alignment. For corners, work slowly and avoid stretching the tape, since stretching can thin the profile and reduce sealing pressure after installation.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis weather seal fits boats that need a simple gasket strip for hatches, live wells, cockpit lockers, instrument covers, or small electronics enclosures. It is a good match for owners replacing worn foam or rubber tape that has flattened, cracked, lost adhesion, or started letting lids rattle underway.\u003c\/p\u003e\u003cp\u003eIt is not a substitute for structural bedding compound, underwater sealant, or a gasket that must meet a specified fuel, oil, or pressure rating. Use it where a compressible weather strip is the correct sealing method.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eInspect the seal during regular washdowns and seasonal service. Replace it when the rubber no longer rebounds, the adhesive lifts, or the lid begins to rattle again. Keeping the surface clean and free of heavy residue helps the seal maintain contact and keeps the closing surface consistent over time.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023119282357,"sku":"QBP874311","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331874_qbp874311.jpg?v=1780191737"},{"product_id":"qbp781049","title":"TACO Marine Weather Seal Tape, 10 ft x 1\/2 in x 1\/2 in, Black Rubber","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V30-0202B10-1 is a black 1\/2 inch by 1\/2 inch weather seal tape supplied in a 10 ft length for sealing openings and covers on boats. It is made for places where water, vibration and repeated closing can become a problem, including livewells, exterior doors, instrument covers and electronic boxes.\u003c\/p\u003e\u003cp\u003eThe seal uses an EDPM synthetic rubber compound with a sponge rubber profile and medium closed-cell density. Its self-adhesive backing helps it sit in place during installation, while the rubber compresses to help reduce leaks, rattling and impact between contact surfaces.\u003c\/p\u003e\u003cp\u003eThis is a practical replacement or upgrade seal for boat owners working on trim, hatch, lid or enclosure areas that see spray, sun and changing temperatures. The black color keeps the finished edge low-profile on many deck and cockpit installations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10 ft length with a 1\/2 inch width and 1\/2 inch height for a square sealing profile.\u003c\/li\u003e\n\u003cli\u003eBlack weather seal tape made for livewells, exterior doors, instrument covers and electronic boxes.\u003c\/li\u003e\n\u003cli\u003eEDPM synthetic rubber compound resists water absorption, sunlight damage and extreme temperatures.\u003c\/li\u003e\n\u003cli\u003eSponge rubber with medium closed-cell density helps absorb shock and reduce vibration.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty self-adhesive backing supports straightforward placement on clean, prepared surfaces.\u003c\/li\u003e\n\u003cli\u003eHelps reduce leaks and rattling where lids, doors or covers close against a sealing surface.\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore installation, the mounting surface should be clean, dry and free of old adhesive, salt, wax or grease. A careful test fit is useful before removing the backing, especially around corners, hatch frames or box lids where the seal needs to compress evenly.\u003c\/p\u003e\u003cp\u003eThe 1\/2 inch by 1\/2 inch profile is best matched to openings with enough clearance for compression. On doors and covers, the seal should contact the mating surface without forcing hinges, latches or hardware out of alignment.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis weather seal suits maintenance work on fishing boats, center consoles, cruisers and sailboats where lockers, livewells, electronics covers or exterior access doors need a cleaner seal. It is especially useful in areas exposed to spray, washdowns, vibration from running gear or repeated opening and closing during a day on the water.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023132455093,"sku":"QBP781049","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331781_qbp781049.jpg?v=1780191766"},{"product_id":"qbp446488","title":"TACO Marine SuproFlex Small Rub Rail Kit, 1-19\/32 in x 25\/32 in, 60 ft, Flex Chrome Insert","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine SuproFlex Small Rub Rail Kit is a 60 ft co-extruded vinyl rub rail kit for replacing or upgrading the protective rail along a boat hull. It measures 1-19\/32 in high by 25\/32 in wide and uses a soft front surface over a more rigid backing, giving the rail a practical balance of flex and impact absorption at docks, pilings, lifts, and raft-up contact points.\u003c\/p\u003e\u003cp\u003eThis kit is made for owners and yards that need a rub rail that can follow common hull shapes without the heavy handling of a metal rail. The SuproFlex profile requires minimal heating and does not need pre-forming, which helps during refits where the rail has to wrap cleanly around curves, corners, and transom areas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e60 ft rub rail kit sized at 1-19\/32 in high by 25\/32 in wide for small rub rail replacement and refit projects.\u003c\/li\u003e\n\u003cli\u003eCo-extruded vinyl construction uses two hardness levels, with a rigid backing and a softer front contact surface.\u003c\/li\u003e\n\u003cli\u003eShock-absorbing channels help the rail take everyday impact from docks, trailers, pilings, and close-quarters handling.\u003c\/li\u003e\n\u003cli\u003eUltra-flexible profile can mold to most hull shapes with minimal heating and no pre-forming.\u003c\/li\u003e\n\u003cli\u003eUses TACO Marine Flex Chrome insert V12-0307 for a finished trim look across both color options.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis SuproFlex Small Rub Rail Kit is offered in two color configurations for matching the existing trim line or changing the look of the hull during a refit.\u003c\/p\u003e\u003cp\u003eThe profile size, 60 ft length, Flex Chrome insert style, and #8 screw spacing at 4 in on center remain consistent across the listed configurations. The visible rub rail color is the main difference between the variants.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-9960BBK60-2: Black rub rail with Flex Chrome insert. The black rail gives the hull side a defined trim line and is a common match for darker boat accents, windshields, hardware, and graphics.\u003c\/li\u003e\n\u003cli\u003eV11-9960WCM60-2: Frosty White rub rail with Flex Chrome insert. The white rail keeps the trim line lighter visually and is a natural fit for boats with white hulls, topsides, or existing white rub rail profiles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis profile is suited for hull-side rub rail replacement where the existing rail dimensions and shape are compatible with a 1-19\/32 in by 25\/32 in profile. Before ordering, compare the old rail height, width, insert style, and available mounting surface, especially around tight bow curves and transom corners.\u003c\/p\u003e\u003cp\u003eThe 60 ft length works well for many smaller boats or partial rail replacement projects, but the required length should be checked against the full perimeter being covered. Extra length is useful when trimming ends cleanly or working around hardware, end caps, and corners.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis rub rail is a good match for boat owners, marine service yards, and builders handling cosmetic refits, impact protection upgrades, or replacement of worn vinyl rub rail. It is especially practical for boats that see regular dock contact, trailer loading, marina slips, fishing use, and coastal cruising where the hull edge needs protection without adding a heavy metal rail.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Black","offer_id":52023144972469,"sku":"QBP446488-V5","price":595.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":52023145005237,"sku":"QBP446488-V9","price":626.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335283_qbp446488.jpg?v=1780191793"},{"product_id":"qbp166653","title":"TACO Marine SuproFlex Rub Rail End Cap, For V11-9970, Large, Type-316L SS, Mirror Polish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0276 is a large stainless steel SuproFlex end cap for finishing the stern end of a TACO SuproFlex V11-9970 rub rail installation. It gives the rub rail a clean termination point and helps keep the insert seated at the end of the rail, which matters on boats where dock contact, washdowns, and vibration can work on exposed trim edges over time.\u003c\/p\u003e\u003cp\u003eThis end cap is made from Type-316L stainless steel with a mirror polish finish, so it matches bright stainless trim hardware and suits exposed exterior locations. It is sized for the large SuproFlex application and uses a #8 screw for mounting.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits TACO SuproFlex V11-9970 rub rail installations.\u003c\/li\u003e\n\u003cli\u003eLarge end cap closes off the rub rail at the stern for a finished look.\u003c\/li\u003e\n\u003cli\u003eHelps keep the rub rail insert in place at the end of the run.\u003c\/li\u003e\n\u003cli\u003eType-316L stainless steel construction supports use in wet and saltwater boat environments.\u003c\/li\u003e\n\u003cli\u003eMirror polish stainless finish matches polished deck hardware and trim.\u003c\/li\u003e\n\u003cli\u003eUses a #8 screw for installation.\u003c\/li\u003e\n\u003cli\u003eCovered by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis part is for the SuproFlex V11-9970 rub rail profile. It should be matched to that rail before ordering, especially when replacing only one end cap on an existing installation, since rub rail profiles can look similar but vary in shape and insert fit.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe end cap is used at the stern end of the rub rail, where it covers the exposed rail end and helps secure the insert. During installation, align the cap cleanly with the rail profile before fastening, and use the correct #8 screw type for the hull material and mounting surface.\u003c\/p\u003e\u003cp\u003eIt is a practical replacement part for refits, rub rail repairs, and new SuproFlex installations on boats where a clean stern finish is needed without changing the full rail system.\u003c\/p\u003e\u003ch6\u003eMaterials and finish\u003c\/h6\u003e\u003cp\u003eType-316L stainless steel is a strong choice for exterior trim pieces that see spray, dockside moisture, and regular cleaning. The mirror polish finish gives the cap a finished appearance that blends well with stainless cleats, rail fittings, hinges, and other polished hardware around the transom.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52024066343093,"sku":"QBP166653","price":54.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331357_qbp166653.jpg?v=1780192096"},{"product_id":"qbp183112","title":"TACO Marine Rub Rail End Cap, For V11-2423 \u0026 V11-3426, 2 in, White Nylon","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F90-0001WN is a 2-inch white nylon rub rail end cap made to finish the stern end of compatible TACO rub rail installations. It gives the rail a clean stopping point and helps keep the rub rail insert in place once the rail is trimmed and secured.\u003c\/p\u003e\u003cp\u003eThis end cap fits TACO rub rail profiles V11-2423 and V11-3426, so it is best matched by checking the existing rail profile before ordering. The white finish works well on many fiberglass hulls and transoms where a low-profile trim piece is needed to complete a repair, refit, or new rub rail installation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-inch rub rail end cap for finishing the stern end of a rub rail run.\u003c\/li\u003e\n\u003cli\u003eWhite nylon construction for use as exterior boat trim hardware.\u003c\/li\u003e\n\u003cli\u003eCompatible with TACO rub rail profiles V11-2423 and V11-3426.\u003c\/li\u003e\n\u003cli\u003eHelps keep the rub rail insert seated at the end of the installation.\u003c\/li\u003e\n\u003cli\u003eSold individually, making it suitable for single-side replacement or matched pair ordering as needed.\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eUse this end cap after the rub rail and insert have been cut to length and aligned at the stern. Fit should be confirmed against the rail profile, especially on older boats where rub rail styles may have changed during previous repairs.\u003c\/p\u003e\u003cp\u003eFor the cleanest result, dry-fit the cap before final fastening and make sure the insert sits fully inside the rail. This helps avoid a loose end that can catch during docking, trailering, washdowns, or routine handling around the transom.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis part is a practical match for boat owners replacing a damaged rub rail end cap, completing a rub rail installation, or tidying up stern trim after a repair. It is especially useful where the exposed end of the rail needs a finished look and the insert needs a defined stopping point.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the area during normal boat washdowns and check the cap during seasonal inspections. If the rub rail insert begins to creep or the cap is damaged by dock contact, replacing the end cap is a simple way to restore the finished edge of the rail.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eOne white 2-inch rub rail end cap.\u003c\/li\u003e\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52581877743797,"sku":"QBP183112","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331946_qbp183112.webp?v=1780201081"},{"product_id":"qbp869369","title":"TACO Marine Medium SuproFlex Rub Rail End Cap, For V11-9990, 316L Stainless Steel, Mirror Polish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0272 is a stainless steel medium SuproFlex rub rail end cap for finishing the end of a TACO Marine V11-9990 rub rail installation. It caps the rub rail at the stern, giving the run a clean termination while helping keep the insert in place where the rail ends.\u003c\/p\u003e\u003cp\u003eThis end cap is made from Type-316L stainless steel with a mirror-polished finish, so it suits exposed exterior areas where saltwater, spray, and dockside contact are part of normal use. It is a practical replacement or finishing piece for boat owners, riggers, and yards working on SuproFlex rub rail repairs or new rub rail installations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for TACO Marine SuproFlex V11-9990 medium rub rail installations.\u003c\/li\u003e\n\u003cli\u003eType-316L stainless steel construction for exposed marine use.\u003c\/li\u003e\n\u003cli\u003eMirror-polished finish matches polished stainless deck and hull hardware.\u003c\/li\u003e\n\u003cli\u003eCaps the rub rail at the stern for a finished edge at the end of the run.\u003c\/li\u003e\n\u003cli\u003eHelps keep the rub rail insert seated at the termination point.\u003c\/li\u003e\n\u003cli\u003eUses #8 countersunk screw mounting for a flush fastener appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eUse this end cap where the V11-9990 SuproFlex rub rail terminates, commonly at the stern or another visible end point on the hull. Before fastening, confirm the rail profile, insert position, and cap alignment so the end cap sits cleanly against the rub rail without forcing the insert or distorting the rail.\u003c\/p\u003e\u003cp\u003eBecause the cap uses #8 countersunk screw mounting, the fastener heads can sit neatly in the cap when installed with matching countersunk hardware. On fiberglass hulls, proper pilot holes, bedding compound, and careful screw tension help reduce the risk of gelcoat cracking and water intrusion around the fasteners.\u003c\/p\u003e\u003ch6\u003eMaterials and marine use\u003c\/h6\u003e\u003cp\u003eType-316L stainless steel is a strong choice for hardware near the waterline, swim platform, transom, or other areas that see spray and washdowns. The mirror-polished finish gives the cap a clean look against polished rub rail components and other stainless hardware on the boat.\u003c\/p\u003e\u003cp\u003eThis part is a good match for owners refreshing a worn rub rail end, completing a stern rub rail repair, or replacing a missing cap on a compatible SuproFlex setup.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52581879578805,"sku":"QBP869369","price":38.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332071_qbp869369.png?v=1780201165"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/collections\/1119285_rub-rail-parts.jpg?v=1763133748","url":"https:\/\/www.qualityboatparts.com\/collections\/rub-rail-parts.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}