{"title":"Polymer Lumber","description":"","products":[{"product_id":"qbp446024","title":"TACO Marine P10 Series Marine Lumber, King StarBoard HDPE, UV-Stabilized","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P10 Series is a King StarBoard marine lumber range for making or replacing boat accessories, panels, trim pieces, mounting pads, and other fabricated parts where wood, laminates, or common plastic do not hold up well. These sheets are made from high-density polyethylene and are UV-stabilized for marine exposure.\u003c\/p\u003e\u003cp\u003eThe material is built for wet, humid spaces on board and will not warp, rot, or delaminate when exposed to water. It can be cut, drilled, routed, and shaped with standard woodworking tools, which makes it practical for custom work in a cockpit, cabin, console, deck area, or dockside repair setup.\u003c\/p\u003e\u003cp\u003eThis range covers common project sizes from 6 x 12 inches up to 24 x 27 inches, with thickness options of 1\/4 inch, 1\/2 inch, and 3\/4 inch. Black and white options are available, giving builders and boat owners a clean match for many existing hardware layouts and interior or exterior finishes.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eKing StarBoard marine polymer sheet for boat accessories, replacement panels, trim, mounting plates, and custom fabricated parts.\u003c\/li\u003e\n\u003cli\u003eHigh-density polyethylene construction helps replace wood, laminates, and standard plastic in wet marine locations.\u003c\/li\u003e\n\u003cli\u003eUV-stabilized material supports use in areas exposed to sun, spray, and changing weather.\u003c\/li\u003e\n\u003cli\u003eResists warping, rot, and delamination when exposed to humidity or water.\u003c\/li\u003e\n\u003cli\u003eWorks with standard woodworking tools, so cutting, drilling, routing, and shaping can be handled during normal shop or boatyard fabrication.\u003c\/li\u003e\n\u003cli\u003eRequires little to no finishing after fabrication, which helps reduce project time compared with painted or sealed wood.\u003c\/li\u003e\n\u003cli\u003eAvailable in multiple sheet sizes, thicknesses, and color options for different mounting, panel, and repair needs.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a three-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe range varies by color, sheet size, and thickness. Current options include black or white sheets, with dimensions such as 6 x 12 inches, 12 x 12 inches, 12 x 27 inches, and 24 x 27 inches. Thickness options include 1\/4 inch, 1\/2 inch, and 3\/4 inch, allowing the material to suit lighter trim work or more substantial fabricated parts.\u003c\/p\u003e\u003cp\u003eThe core material type and marine use remain consistent across the range: King StarBoard polymer lumber for boat projects where resistance to water, humidity, UV exposure, and delamination matters.\u003c\/p\u003e\u003ch6\u003eInstallation and fabrication\u003c\/h6\u003e\u003cp\u003eThis material is a good fit for boat owners, builders, and repair shops that need a workable sheet stock for custom parts. It can be measured, cut, drilled, routed, and fastened using common woodworking methods, while still giving better resistance to water exposure than wood-based materials.\u003c\/p\u003e\u003cp\u003eFor best results, the sheet size and thickness should be matched to the job. Thinner pieces are useful for covers, trim, and light panels, while thicker sheets make more sense for mounting pads, backing surfaces, and parts that need extra stiffness.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThe P10 Series works well for small fabrication jobs around fishing boats, cruisers, sailboats, tenders, and workboats. Common uses include electronics mounting surfaces, hatch or access panels, console upgrades, tackle station parts, cabin trim, dockside replacement pieces, and custom brackets where a clean polymer sheet is easier to maintain than wood.\u003c\/p\u003e\u003cp\u003eIt is especially useful for owners who want a part that can be shaped to fit an existing layout without painting, sealing, or worrying about rot in wet areas.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRoutine care is simple. Rinse away salt and dirt after exposure, then clean the surface with mild soap and water as needed. Since the material does not require paint or varnish, it helps keep maintenance low on parts that see regular spray, humidity, or foot traffic around the boat.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Black \/ 12 x 27 x 1\/2-Inch","offer_id":52023072555189,"sku":"QBP446024-V5","price":68.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 12 x 27 x 1\/2-Inch","offer_id":52023072587957,"sku":"QBP446024-V0","price":68.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 12 x 27 x 3\/4-Inch","offer_id":52023072620725,"sku":"QBP446024-V6","price":99.99,"currency_code":"USD","in_stock":false},{"title":"White \/ 12 x 27 x 3\/4-Inch","offer_id":52023072653493,"sku":"QBP446024-V3","price":99.99,"currency_code":"USD","in_stock":false},{"title":"Black \/ 24 x 27 x 1\/2-Inch","offer_id":52023072686261,"sku":"QBP446024-V8","price":129.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 24 x 27 x 1\/2-Inch","offer_id":52023072719029,"sku":"QBP446024-V9","price":129.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 12 x 12 x 1\/4-Inch","offer_id":52023072751797,"sku":"QBP446024-V1","price":26.99,"currency_code":"USD","in_stock":false},{"title":"White \/ 12 x 27 x 1\/4-Inch","offer_id":52023072784565,"sku":"QBP446024-V7","price":38.99,"currency_code":"USD","in_stock":false},{"title":"White \/ 24 x 27 x 3\/4-Inch","offer_id":52023072817333,"sku":"QBP446024-V07","price":189.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 24 x 27x 1\/4-Inch","offer_id":52023072850101,"sku":"QBP446024-V74","price":69.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 6 x 12 x 1\/4-Inch","offer_id":52023072882869,"sku":"QBP446024-V39","price":18.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335389_qbp446024.jpg?v=1780191661"},{"product_id":"qbp446048","title":"TACO Marine P14-Series Anti-Skid Marine Lumber, 12 x 27 in, HDPE, UV-Stabilized, Diamond Pattern","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine King Starboard Anti-Skid Marine Starboard is a white polymer lumber sheet for walk-on areas where wet footing, saltwater, and sun exposure are part of normal boat use. It is made from high density, UV-stabilized polyethylene and uses a diamond-pattern surface that adds traction while helping water drain away when the sheet is wet.\u003c\/p\u003e\u003cp\u003eThis P14-Series anti-skid marine lumber is offered in a 12\" x 27\" size with 1\/2\" and 3\/4\" thickness options. It suits high-traffic areas such as boarding steps, swim platforms, hatch covers, ladder steps, shower floors, stairways, entry areas, and deck sections where a high-friction surface matters.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHigh density, UV-stabilized polyethylene construction for marine exposure in sun, spray, and saltwater.\u003c\/li\u003e\n\u003cli\u003eDiamond-pattern surface adds grip underfoot and helps water drain from the contact area when wet.\u003c\/li\u003e\n\u003cli\u003ePasses ASTM D2047 slip-resistant testing for added confidence in walk-on locations.\u003c\/li\u003e\n\u003cli\u003eResists most stains and keeps its color without refinishing.\u003c\/li\u003e\n\u003cli\u003eDoes not rot or delaminate, which makes it useful in damp cockpit, deck, and boarding areas.\u003c\/li\u003e\n\u003cli\u003eChemical-resistant surface cleans with marine-grade soaps or cleansers and fresh water.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis anti-skid marine lumber is offered in two white configurations for the same general walk-on use.\u003c\/p\u003e\u003cp\u003eThe length, width, color, and diamond pattern remain the same across the variants. The thickness changes, giving the installer a choice between a lower-profile 1\/2\" sheet and a heavier 3\/4\" sheet for areas where additional material thickness is preferred.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eP14-5012WHA27-1C: 12\" x 27\" x 1\/2\". This version keeps the 12\" x 27\" footprint with a thinner profile for applications where height buildup should be kept lower.\u003c\/li\u003e\n\u003cli\u003eP14-7512WHA27-1C: 12\" x 27\" x 3\/4\". This version uses the same footprint with added thickness for installations where a more substantial sheet is desired.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis material is a practical match for owners, refit yards, and boat builders working on areas where people step, board, climb, or move around with wet shoes. The white finish works well in visible deck and cockpit spaces, while the anti-skid surface helps make small landing areas, steps, and access points feel more secure underfoot.\u003c\/p\u003e\u003ch6\u003eCare and maintenance\u003c\/h6\u003e\u003cp\u003eRoutine care is straightforward. Rinse with fresh water after saltwater exposure and clean with marine-grade soap or cleanser as needed. The polymer surface does not require varnish, paint, or refinishing, which helps reduce upkeep compared with traditional wood in wet marine locations.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"12 x 27 x 1\/2-Inch","offer_id":52023072915637,"sku":"QBP446048-V9","price":72.99,"currency_code":"USD","in_stock":false},{"title":"12 x 27 x 3\/4- Inch","offer_id":52023072948405,"sku":"QBP446048-V0","price":104.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335391_qbp446048.jpg?v=1780191661"},{"product_id":"qbp452869","title":"TACO Marine P10 Marine Lumber, 12 x 27 x 1\/2 in, Seafoam StarBoard","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P10-5012SFM27-1C is a 12 inch x 27 inch x 1\/2 inch Seafoam King StarBoard polymer sheet for building, repairing, or replacing boat parts where wood, laminate, or general plastic would not hold up well. It is a practical cut-size panel for small fabrication work around consoles, cockpit areas, storage compartments, tackle stations, and other exposed spaces on board.\u003c\/p\u003e\u003cp\u003eThis marine lumber is made from high-density polyethylene with UV-stabilized material for use around sun, spray, saltwater, and humidity. It will not rot, warp, swell, splinter, or delaminate when exposed to water, which makes it a strong fit for boat projects that need a clean finish without painting or sealing.\u003c\/p\u003e\u003cp\u003eThe Seafoam color works well when a lighter, softer finish is preferred over bright white or black. The sheet can be cut, routed, drilled, and shaped with standard woodworking tools, so it suits both repair shops and owners handling measured upgrades on their own boats.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12 inch x 27 inch x 1\/2 inch cut-size sheet for small marine fabrication and replacement jobs.\u003c\/li\u003e\n\u003cli\u003eSeafoam King StarBoard polymer gives boat projects a light finish that blends well with many cockpit, console, and interior surfaces.\u003c\/li\u003e\n\u003cli\u003eHigh-density polyethylene construction handles wet marine areas better than wood, laminate, or many general-purpose plastics.\u003c\/li\u003e\n\u003cli\u003eUV-stabilized material helps the sheet stand up to sun exposure during deck, cockpit, and dockside use.\u003c\/li\u003e\n\u003cli\u003eWill not rot, warp, swell, splinter, or delaminate when exposed to water or humidity.\u003c\/li\u003e\n\u003cli\u003eCan be cut, drilled, routed, and shaped with standard woodworking tools for custom panels, trim pieces, brackets, covers, and accessory mounts.\u003c\/li\u003e\n\u003cli\u003eRequires little to no finishing, so there is no need for paint, varnish, or sealing for normal marine use.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a three-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fabrication\u003c\/h6\u003e\u003cp\u003eMeasure the mounting area carefully before cutting, especially around curved consoles, hatches, electronics spaces, and hardware clearances. The 1\/2 inch thickness gives a useful balance of rigidity and workability for many small panels and boat accessory projects.\u003c\/p\u003e\u003cp\u003eUse clean cutting tools and support the sheet during fabrication to keep edges even. Holes can be drilled for fasteners, switches, hinges, or brackets, and exposed edges can be eased or shaped for a more finished look.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis sheet is well suited for replacing small worn wood or laminate pieces, making custom covers, creating backing panels, trimming storage areas, or adding a clean mounting surface for accessories. It is also useful for fishing boats, center consoles, cruisers, and sailboats where parts see regular moisture and sun.\u003c\/p\u003e\u003cp\u003eFor structural loads, hinge points, or hardware that will be pulled under force, match the fasteners and backing method to the job and the boat surface. The material works well for many onboard fabrication tasks, but proper support and fastening are still important for long-term service.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRoutine cleaning is usually simple. Rinse away salt and dirt, then wash with mild soap and water as needed. Because the material does not require paint or varnish, upkeep is mainly about keeping the surface clean and checking mounted hardware during normal boat maintenance.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023072981173,"sku":"QBP452869","price":68.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331740_qbp452869.jpg?v=1780191662"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/collections\/1119291_polymer-lumber.jpg?v=1763133761","url":"https:\/\/www.qualityboatparts.com\/collections\/polymer-lumber.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}