{"title":"Oil Change Pumps","description":"","products":[{"product_id":"qbp798062","title":"Jabsco Porta Quick Oil Changer, 12V, 14qt, Reversible Pump","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Jabsco 17800-2000 is a 12V portable oil changer that pulls used oil through the dipstick tube and collects it in a 14 quart reservoir. It uses a bronze flexible impeller pump with a reversible motor and integral reversing switch, so the same unit can extract oil from the engine and then empty the container when the job is done.\u003c\/p\u003e\u003cp\u003eThis setup works well on boats where the sump drain is hard to reach and where keeping oil changes above the bilge makes the job cleaner. The unit comes with a 4 ft suction hose, a 40 in Teflon dipstick probe, and a female garden hose thread fitting for engines that use a threaded dipstick connection.\u003c\/p\u003e\u003cp\u003eThe container measures 13-1\/2 in in diameter and 13-5\/8 in high, with an 8 ft power cord and alligator clips for direct connection to a 12V battery. For many routine oil changes, that gives enough reach to place the bucket where it stays steady while you work.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12V DC portable oil changer with a reversible motor and built-in reversing switch\u003c\/li\u003e\n\u003cli\u003eBronze pump body with an oil-resistant nitrile impeller and lip seal\u003c\/li\u003e\n\u003cli\u003e14 quart (13.2 L) reservoir for contained oil changes on board\u003c\/li\u003e\n\u003cli\u003e4 ft (1.2 m) neoprene suction hose with 40 in (1 m) Teflon dipstick probe\u003c\/li\u003e\n\u003cli\u003eFemale garden hose thread fitting for engines with a threaded dipstick connection\u003c\/li\u003e\n\u003cli\u003e8 ft (2.4 m) power cord with alligator clips for direct battery connection\u003c\/li\u003e\n\u003cli\u003e7 amp draw with a 10 amp fuse requirement\u003c\/li\u003e\n\u003cli\u003eReservoir can be emptied by reversing flow or by using the retractable pour spout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis unit is for 12V DC systems only. It is a practical match for boats with inboard engines or generators that can be serviced through the dipstick tube, especially where access under the engine is limited.\u003c\/p\u003e\u003cp\u003eThe included probe and hose arrangement also suits installations that use a male garden hose thread at the dipstick fitting. Before buying, it is worth checking that your engine layout gives clear access to the dipstick tube and that the probe length matches the depth needed to reach the oil pan.\u003c\/p\u003e\u003ch6\u003eElectrical and setup\u003c\/h6\u003e\u003cp\u003eConnection is straightforward: clamp the red and black leads to the battery, fit either the dipstick probe or the garden hose adaptor, and run the pump in the required direction. The motor draws 7 amps and uses a 10 amp fuse, which matters when you are setting up a dedicated service lead or replacing the fuse holder protection.\u003c\/p\u003e\u003cp\u003eFor faster extraction, the oil should be warmed first. The working guidance is 140°F to 185°F, and a normal 6 quart pump-out takes less than 3 minutes. That makes it useful for routine service on cruising boats, fishing boats, and other setups where moving a drain pan around the engine space is awkward.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePortable oil changer pump and lid assembly\u003c\/li\u003e\n\u003cli\u003e14 quart container\u003c\/li\u003e\n\u003cli\u003e4 ft suction hose\u003c\/li\u003e\n\u003cli\u003e40 in dipstick probe\u003c\/li\u003e\n\u003cli\u003eFemale garden hose thread fitting\u003c\/li\u003e\n\u003cli\u003e8 ft power cord with alligator clips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":52021069807797,"sku":"QBP798062","price":424.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330059_qbp798062.jpg?v=1780191620"},{"product_id":"qbp449917","title":"Albin - Oil Changer System","description":"\u003ch4\u003eEffortless Oil Changes at Sea: The Ultimate Marine Oil Changer System\u003c\/h4\u003e \u003cp\u003eDesigned for the seafaring mechanic, the Oil Changer System simplifies the task of oil changes and the management of other viscous liquids such as antifreeze, even in the most cramped spaces aboard. With its self-priming, dry-run capable pump and reversible operation, this kit ensures a clean, efficient, and hassle-free maintenance routine, letting you focus on the journey ahead.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSelf-priming pump allows for easy startup without manual priming\u003c\/li\u003e \u003cli\u003eCapability to run dry without damage for worry-free operation\u003c\/li\u003e \u003cli\u003eReversible pump feature simplifies the removal and replacement process\u003c\/li\u003e \u003cli\u003eIncludes a comprehensive set for immediate use: a 5-gallon bucket, a 12V gear pump, an oil dip hose set, and necessary connectors\u003c\/li\u003e \u003cli\u003eDesigned for continuous duty with a 6 amp fuse, ensuring reliability during extensive use\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eSail With Confidence: Technical Specifications\u003c\/h4\u003e \u003cp\u003eOur Marine Oil Changer System is built with the high seas in mind, featuring a robust 12V gear pump paired with a durable 5-gallon bucket. The included oil dip hose set with quick-connect hose connections ensures a seamless and clean oil change every time.\u003c\/p\u003e \u003ch4\u003eCompact Design for Tight Spaces\u003c\/h4\u003e \u003cp\u003eUnderstanding the value of space on any vessel, this system is compactly designed to fit in the tightest of engine rooms, making it a perfect fit for boats of all sizes.\u003c\/p\u003e \u003ch4\u003eVersatile and Ready for the Sea\u003c\/h4\u003e \u003cp\u003eAvailable in variations to suit different marine needs, this kit includes oil dip hoses in both 6mm and 8mm sizes and 5\/8 in. port connections, ensuring compatibility with a wide range of marine engines.\u003c\/p\u003e \u003ch4\u003eReliable Operation in Harsh Marine Conditions\u003c\/h4\u003e \u003cp\u003eWith its 6 amp fuse, the system is safeguarded against overloads, ensuring continuous duty capability even under the harsh conditions of marine environments.\u003c\/p\u003e","brand":"Albin Pump Marine","offers":[{"title":"Default Title","offer_id":52023240491189,"sku":"QBP449917","price":250.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1212584_qbp449917.jpg?v=1763252633"},{"product_id":"qbp579093","title":"Albin - Marine Gear Pump Oil Change Kit","description":"\u003ch4\u003eEffortless Marine Oil Changes: Gear Pump Kit 12V\u003c\/h4\u003e \u003cp\u003eDiscover the ultimate solution for marine oil changes with our Gear Pump Oil Change Kit, tailored for 12V systems. Designed for seamless operation in the tightest spaces, this kit is your go-to for efficient oil or viscous liquid management onboard. Its self-priming feature, ability to run dry, and reversible flow direction make it a versatile and indispensable tool for continuous marine use.\u003c\/p\u003e \u003ch4\u003eUnmatched Efficiency and Convenience\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eSelf-priming operation allows for hassle-free start-ups\u003c\/li\u003e \u003cli\u003eCapability to run dry for worry-free use\u003c\/li\u003e \u003cli\u003eReversible flow direction with simple polarity change\u003c\/li\u003e \u003cli\u003eBuilt for continuous duty, ensuring reliability for long hauls\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eCompact Design, Mighty Performance\u003c\/h4\u003e \u003cp\u003eDespite its compact dimensions, this gear pump does not compromise on power. It's engineered to fit into the most restricted spaces, ensuring that your marine oil change or fluid transfer tasks are completed without a hitch. The inclusion of both 6mm and 8mm hoses, connections, and necessary wiring means you're ready to go right out of the box.\u003c\/p\u003e \u003ch4\u003eSail Smoothly With Essential Specifications\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eWeight: 0.4 kg\/0.75 lbs - Lightweight for easy handling\u003c\/li\u003e \u003cli\u003eDimensions: 140\/5.5L x 90\/3.5H x 80\/3.15W mm\/in - Compact for tight spaces\u003c\/li\u003e \u003cli\u003ePort Connections: 13 mm (3\/8”) - Universal compatibility\u003c\/li\u003e \u003cli\u003eEquipped with a 6A fuse for safety and compliance\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eChoose Your Power: Voltage Variations\u003c\/h4\u003e \u003cp\u003eOur Gear Pump Oil Change Kit comes in two voltage variations to match your system requirements: the standard 12V model for typical setups and an alternative 24V option for systems requiring higher voltage. Each variant is designed with the same high standards of efficiency and durability, ensuring you have the right tool for your marine needs.\u003c\/p\u003e \u003cp\u003eAll models are CE marked and meet ISO8846 Small Craft, Electromagnetic compatibility 89\/336\/EEC, and EN51014 1993\/radio disturbance standards, providing you with peace of mind that you're investing in a quality, compliant solution for your marine oil change requirements.\u003c\/p\u003e","brand":"Albin Pump Marine","offers":[{"title":"12V","offer_id":52023300980917,"sku":"QBP579093-V4","price":225.36,"currency_code":"USD","in_stock":true},{"title":"24V","offer_id":52023301013685,"sku":"QBP579093-V8","price":232.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1213553_qbp579093.jpg?v=1763253212"},{"product_id":"qbp268542","title":"Sea-Dog - Manual Oil Change Pump","description":"\u003ch4\u003eEfficient Marine Maintenance: The Sea-Dog Manual Oil Change Pump\u003c\/h4\u003e \u003cp\u003eIntroducing the Sea-Dog Manual Oil Change Pump, a must-have tool for the conscientious boat owner. This hand-operated pump is designed to make oil changes a breeze for inboard and I\/O engines, eliminating the need for complicated machinery or professional services. Simply insert one of the two included drain tubes into the dipstick hole, and use the convenient hand pump to drain the oil quickly and cleanly. This process not only saves time but also helps to prevent spills and environmental harm, ensuring your maintenance routine is as eco-friendly as it is efficient. Please note, this product is subject to a warning from the State of California due to chemicals that are known to cause cancer, birth defects, or other reproductive harm.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHand-operated pump for easy and efficient oil changes\u003c\/li\u003e \u003cli\u003eIncludes two drain tubes for versatility in application\u003c\/li\u003e \u003cli\u003eEliminates the need for complicated machinery or professional services\u003c\/li\u003e \u003cli\u003eDesigned for use with inboard and I\/O engines, enhancing convenience\u003c\/li\u003e \u003cli\u003eCalifornia Proposition 65 warning for exposure to certain chemicals\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Simplicity: Specifications\u003c\/h4\u003e \u003cp\u003eThe Manual Oil Change Pump by Sea-Dog is built with user convenience in mind. Its manual operation eliminates the reliance on power sources, making it perfect for use in remote locations or for those who prefer a hands-on approach to boat maintenance. The inclusion of two different-sized drain tubes ensures compatibility with a variety of engines, providing a flexible solution for your oil change needs.\u003c\/p\u003e \u003ch4\u003eCompact and Portable: Product Dimensions\u003c\/h4\u003e \u003cp\u003eDesigned with the space constraints of boat storage in mind, the Sea-Dog Manual Oil Change Pump is compact and lightweight, making it easy to store and transport. Its portability ensures that you can perform essential maintenance tasks wherever you are, keeping your engine in top condition without the need for bulky equipment.\u003c\/p\u003e \u003ch4\u003eDurable and Dependable: Finishes \u0026amp; Design\u003c\/h4\u003e \u003cp\u003eThe Sea-Dog Manual Oil Change Pump is designed to withstand the rigors of marine environments. Its durable construction ensures long-lasting performance, providing a reliable and cost-effective solution for your engine maintenance needs. The pump’s design prioritizes ease of use, with ergonomic features that make oil changes less of a chore and more of a simple, straightforward task.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":52023367762101,"sku":"QBP268542","price":39.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1214712_qbp268542.jpg?v=1763253812"},{"product_id":"qbp809461","title":"Sea-Dog - Oil Change Pump - Battery Clips, 12V, 60W","description":"\u003ch4\u003eEffortless Oil Changes Made Easy: The Sea-Dog Electric Oil Change Pump\u003c\/h4\u003e \u003cp\u003eTake control of your boat's maintenance with the Sea-Dog Electric Oil Change Pump. This portable and user-friendly tool empowers you to perform oil changes quickly, conveniently, and affordably, right at your own dock or trailer. No more struggling with messy manual pumps or paying for expensive oil change services.\u003c\/p\u003e \u003ch4\u003eSimple and Efficient Oil Removal\u003c\/h4\u003e \u003cp\u003eThe Sea-Dog Electric Oil Change Pump utilizes a self-priming 12V motor to efficiently remove used oil from your boat's engine. It easily attaches to your battery terminals using the included alligator clips and connects directly to your outboard or sterndrive's dipstick tube. The 48-inch inlet hose ensures sufficient reach, while the 80-inch outlet hose allows you to direct the used oil into a suitable container for disposal.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSelf-priming 12V motor simplifies operation.\u003c\/li\u003e \u003cli\u003eAlligator clips connect directly to your boat's battery.\u003c\/li\u003e \u003cli\u003e48-inch inlet hose reaches most dipstick tubes.\u003c\/li\u003e \u003cli\u003e80-inch outlet hose allows for easy oil drainage.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eCompact Design for Easy Storage and Portability\u003c\/h4\u003e \u003cp\u003eThe Sea-Dog Electric Oil Change Pump boasts a compact and lightweight design, making it easy to store on your boat without taking up valuable space. Its portability allows you to perform oil changes at your convenience, whether you're docked at home or exploring remote waterways.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCompact and lightweight design for easy storage.\u003c\/li\u003e \u003cli\u003ePortable and convenient for use anywhere.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Specifications\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eVoltage: 12VDC\u003c\/li\u003e \u003cli\u003ePower: 60W\u003c\/li\u003e \u003cli\u003eMaximum Run Time: 30 minutes\u003c\/li\u003e \u003cli\u003eOil Flow Rate: 0.84 quarts\/min @ 140°F (0.8 liters\/min @ 60°C)\u003c\/li\u003e \u003cli\u003eDiesel Flow Rate: 1.9 quarts\/min @ 75°F (1.8 liters\/min @ 23°C)\u003c\/li\u003e \u003cli\u003eInlet Hose Length: 48 inches\u003c\/li\u003e \u003cli\u003eOutlet Hose Length: 80 inches\u003c\/li\u003e \u003cli\u003eImportant Note: Not intended for commercial use. Not suitable for pumping out transmission oil, water, or flammable liquids.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eHighlights\u003c\/h4\u003e \u003cp\u003eIn addition to the features mentioned above, the Sea-Dog Electric Oil Change Pump offers several noteworthy benefits for boat owners:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSaves money on expensive oil change services.\u003c\/li\u003e \u003cli\u003eAllows you to perform oil changes at your own convenience.\u003c\/li\u003e \u003cli\u003eSimple and user-friendly operation, ideal for DIY enthusiasts.\u003c\/li\u003e \u003cli\u003eCompact and portable design for easy storage and use.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eBy empowering you to take charge of your boat's maintenance, the Sea-Dog Electric Oil Change Pump is an essential tool for any boater who values convenience, affordability, and self-reliance.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":52023379689653,"sku":"QBP809461","price":92.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1215000_qbp809461.jpg?v=1763253964"},{"product_id":"qbp868220","title":"Johnson Pump - Oil Change Bucket Kit - With Gear Pump","description":"\u003ch4\u003eStreamline Your Maintenance Routine\u003c\/h4\u003e\u003cp\u003eThe Johnson Pump Oil Change Bucket Kit with Gear Pump is designed to make oil changes on your marine or industrial equipment fast, efficient, and mess-free. Utilizing proven gear pump technology, this kit provides a reliable and easy-to-use solution for maintaining your engines.\u003c\/p\u003e\u003ch4\u003eSimplified Oil Changes\u003c\/h4\u003e\u003cp\u003eChanging the oil in your marine engine can be a hassle, but the Johnson Pump Oil Change Bucket Kit makes it simple. Equipped with a durable gear pump, this kit ensures smooth and effective oil extraction, making your maintenance tasks easier than ever.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProven Gear Pump Technology\u003c\/strong\u003e: Delivers reliable and consistent performance, ensuring efficient oil changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePortable and Convenient\u003c\/strong\u003e: The complete kit is designed for easy transport and use, making it ideal for on-the-go maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Temperature Resistant Dipstick Tube\u003c\/strong\u003e: Ensures safe and effective oil extraction, even at high temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eKey Features and Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable Gear Pump\u003c\/strong\u003e: Ensures smooth and efficient operation for quick oil changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Components\u003c\/strong\u003e: Built to withstand the demands of marine and industrial applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser-Friendly Design\u003c\/strong\u003e: Features like heavy-duty alligator clips and an easy pour spout make the oil change process straightforward and mess-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 Volt Power\u003c\/strong\u003e: Convenient power option that connects directly to your battery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eKit Includes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePail\u003c\/strong\u003e: 5-gallon capacity for collecting used oil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Lid\u003c\/strong\u003e: Keeps contents secure and prevents spills.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Assembly\u003c\/strong\u003e: Robust gear pump for efficient oil extraction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDipstick Tube\u003c\/strong\u003e: High-temperature resistant for safe use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy Duty Alligator Clips\u003c\/strong\u003e: Easily clamp onto the battery for power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Pour Spout\u003c\/strong\u003e: Facilitates clean and easy disposal of used oil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply\u003c\/strong\u003e: 12 Volt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 1 Year\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePail Capacity\u003c\/strong\u003e: 5 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDipstick Tube Length\u003c\/strong\u003e: 8mm and 6mm sizes included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Lead Length\u003c\/strong\u003e: 70.9 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy Choose the Johnson Pump Oil Change Bucket Kit?\u003c\/h3\u003e\u003cp\u003eThe Johnson Pump Oil Change Bucket Kit with Gear Pump offers a reliable and efficient solution for your oil change needs. Its robust construction, ease of use, and portable design make it the perfect choice for both marine and industrial applications.\u003c\/p\u003e\u003ch3\u003eExplore the Johnson Pump Oil Change Bucket Kit\u003c\/h3\u003e\u003cp\u003eEnsure your engines are well-maintained with the Johnson Pump Oil Change Bucket Kit. Designed for ease of use and superior performance, this kit provides everything you need for quick, clean, and efficient oil changes. Invest in quality and reliability to keep your equipment running smoothly and efficiently.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"Default Title","offer_id":52023666147509,"sku":"QBP868220","price":362.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1223804_qbp868220.jpg?v=1763257408"},{"product_id":"qbp856249","title":"Johnson Pump - Oil Change Gear Pump Kit","description":"\u003ch4\u003eSimplify Your Marine Maintenance with Ease and Precision\u003c\/h4\u003e\u003cp\u003eIntroducing the Johnson Pump Gear Pump with Oil Change Kit, an essential tool for any marine enthusiast looking to simplify their oil change process. This light and compact gear pump is designed to provide efficient oil extraction and replacement, making maintenance quick and hassle-free. Engineered with high-quality PTFE materials, the pump body and gears ensure durability and reliable performance, making it a must-have for any vessel's maintenance toolkit.\u003c\/p\u003e\u003ch4\u003eEfficient and User-Friendly Design\u003c\/h4\u003e\u003cp\u003eThe Johnson Pump Gear Pump with Oil Change Kit is crafted for ease of use and efficiency. Its self-priming capability up to 1 meter (3.28 feet) allows for straightforward operation, while the included oil dip stick extraction tubes (6 mm and 8 mm) make it versatile for various applications. With a capacity of 8 liters per minute (2.11 GPM), this pump ensures a swift oil change process, reducing downtime and enhancing productivity. The compact dimensions and lightweight design (1.1 kg) make it easy to handle and store.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Quality PTFE Construction:\u003c\/strong\u003e Durable pump body and gears for long-lasting performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Priming Capability:\u003c\/strong\u003e Up to 1 meter (3.28 feet) for easy operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficient Oil Extraction:\u003c\/strong\u003e Capacity of 8 liters per minute (2.11 GPM) for quick oil changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact and Lightweight:\u003c\/strong\u003e Dimensions of 140 x 80 mm (5.51\" x 3.15\") and weight of 1.1 kg for easy handling and storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Kit:\u003c\/strong\u003e Includes oil dip stick extraction tubes (6 mm and 8 mm) and 180 cm (70.9\") connection wires with battery clamps.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e Available in 12V and 24V variants\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PTFE pump body and gears\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePort Connection:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cstrong\u003eOutlet:\u003c\/strong\u003e 14 mm (0.551\") hose\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cstrong\u003eInlet:\u003c\/strong\u003e 8 mm (0.315\") hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 8 liters per minute (2.11 GPM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 140 x 80 mm (5.51\" x 3.15\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuse Size:\u003c\/strong\u003e 8A for 12V\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompact and Robust Design\u003c\/h4\u003e\u003cp\u003eThe Johnson Pump Gear Pump with Oil Change Kit is designed to be both compact and robust, making it an ideal choice for marine environments where space and durability are crucial. Its lightweight nature allows for easy portability, ensuring you can perform maintenance tasks with ease, no matter where you are.\u003c\/p\u003e\u003ch4\u003eSleek and Durable Finish\u003c\/h4\u003e\u003cp\u003eBuilt with high-quality PTFE materials, this gear pump not only provides durability but also a sleek finish that enhances its overall appearance. The corrosion-resistant properties ensure it withstands the harsh marine environment, maintaining its functionality and aesthetic appeal over time.\u003c\/p\u003e\u003ch4\u003eProduct Variations\u003c\/h4\u003e\u003col\u003e\u003cli\u003e\u003cstrong\u003e12V Version:\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ol\u003e\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eIdeal for standard marine electrical systems, providing reliable oil change capabilities.\u003c\/li\u003e\n\u003c\/ul\u003e\u003col\u003e\u003cli\u003e\u003cstrong\u003e24V Version:\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ol\u003e\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 24V\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eSuitable for higher voltage systems, offering the same efficient performance in a different electrical setup.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eGeneral Dimensions\u003c\/h4\u003e\u003cp\u003eWith dimensions of 140 x 80 mm (5.51\" x 3.15\"), the Johnson Pump Gear Pump with Oil Change Kit is designed to be compact and easy to store, ensuring it fits seamlessly into your marine maintenance setup.\u003c\/p\u003e\u003cp\u003eThe Johnson Pump Gear Pump with Oil Change Kit is the perfect solution for efficient and reliable oil changes in marine environments. Its advanced design, durable construction, and user-friendly features make it an essential tool for any vessel, ensuring your maintenance tasks are completed quickly and effectively. Choose the Johnson Pump Gear Pump with Oil Change Kit for a superior marine maintenance experience.\u003c\/p\u003e","brand":"Johnson Pump","offers":[{"title":"12V","offer_id":52023669129397,"sku":"QBP856249-8","price":195.38,"currency_code":"USD","in_stock":false},{"title":"24V","offer_id":52023669162165,"sku":"QBP856249-7","price":206.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1223927_qbp856249.jpg?v=1763257449"},{"product_id":"qbp777952","title":"Camco Fluid Extractor - 3 Liter 69361","description":"\u003cp\u003e\u003cstrong\u003eFluid Extractor - 3 Liter\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eChange your oil through the dipstick tube and pump most any other fluid! For all types of motors, watercraft and vehicles. Use a TRAC fluid extractor for oil changes and the removal of fuel, coolant and transmission fluid. Use it to pump out bilge water and trapped fluids. Perfect for any situation where draining is difficult. Self-priming pumps create a powerful vacuum to remove almost any non-corrosive liquid. It’s an easier, cleaner way to drain engines with hard-to-reach drain plugs.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTank-style pumps with two different sized extraction tubes.\u003c\/li\u003e \u003cli\u003eClamp holds tubes for tidy storage. No parts floating around to get lost.\u003c\/li\u003e \u003cli\u003eSelf-Priming\u003c\/li\u003e \u003cli\u003eIdeal for nearly all forms of fluid extraction (not for corrosive fluids, such as acids)\u003c\/li\u003e \u003cli\u003eIncludes cap, adapters and hoses\u003c\/li\u003e \u003cli\u003eHose Sizes: Outer Diameter – 0.34 (11\/32)” \/ Length – 6'; Outer Diameter – 0.2 (3\/16)” \/ Length – 6'\u003c\/li\u003e \u003c\/ul\u003e","brand":"Camco","offers":[{"title":"Default Title","offer_id":52023906730165,"sku":"QBP777952","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1232373_qbp777952.jpg?v=1763260360"},{"product_id":"qbp612883","title":"Camco Fluid Extractor - 7 Liter 69362","description":"\u003cp\u003e\u003cstrong\u003eFluid Extractor - 7 Liter\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eChange your oil through the dipstick tube and pump most any other fluid! For all types of motors, watercraft and vehicles. Use a TRAC fluid extractor for oil changes and the removal of fuel, coolant and transmission fluid. Use it to pump out bilge water and trapped fluids. Perfect for any situation where draining is difficult. Self-priming pumps create a powerful vacuum to remove almost any non-corrosive liquid. It’s an easier, cleaner way to drain engines with hard-to-reach drain plugs.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTank-style pumps with two different sized extraction tubes.\u003c\/li\u003e \u003cli\u003eClamp holds tubes for tidy storage. No parts floating around to get lost.\u003c\/li\u003e \u003cli\u003eSelf-Priming\u003c\/li\u003e \u003cli\u003eIdeal for nearly all forms of fluid extraction (not for corrosive fluids, such as acids)\u003c\/li\u003e \u003cli\u003eIncludes cap, adapters and hoses\u003c\/li\u003e \u003cli\u003eHose Sizes: Outer Diameter – 0.34 (11\/32)” \/ Length – 6'; Outer Diameter – 0.2 (3\/16)” \/ Length – 6'\u003c\/li\u003e \u003c\/ul\u003e","brand":"Camco","offers":[{"title":"Default Title","offer_id":52023906762933,"sku":"QBP612883","price":63.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1232374_qbp612883.jpg?v=1763260360"},{"product_id":"qbp223598","title":"Brp Economeasure (173965)","description":"\u003cp\u003e16.2 oz For 110:1, 50:1, 24:1, 16:1 mixtures in gallons or liters, the ECONOMEASURE (173965) BRP measuring cup aids in accurate oil measurement. This assists in avoiding over-or under-oiling. This is a factory-installed part, not a reconditioned one. The container and lid come from a durable material. It is well worth the money in the long run. It is easy to use. The handle comes in a unique design to make the handling became easy. The gaps and spaces of the measurements are visible enough so that the user can see the numbers well. The measuring capability is accurate.\u003c\/p\u003e \u003cp\u003eKey Features:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIt is very durable and long-lasting.\u003c\/li\u003e \u003cli\u003eThe materials are strong enough that can handle the rigorous temperature.\u003c\/li\u003e \u003cli\u003eIt ensures that no leak will occur due to the design of its mouth that is capable of filling the measured oil into the engine or reserve tank of the boat.\u003c\/li\u003e \u003cli\u003eThis product replaces 745419002183, BRP173965, 173965\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eProduct Details:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSKU: 173965\u003c\/li\u003e \u003cli\u003eUPC: 745419002183\u003c\/li\u003e \u003cli\u003eWeight: 0.14 LBS\u003c\/li\u003e \u003cli\u003eCurrent Stock: 70\u003c\/li\u003e \u003c\/ul\u003e \u003cbr\u003e \u003cp\u003e16 oz. Economeasure® measuring cup helps to ensure proper oil measurement for 110:1, 50:1, 24:1, 16:1 mixtures–in gallons or liters.\u003c\/p\u003e \u003ch4\u003eThis product replaces:\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e745419002183, BRP173965, 173965\u003c\/li\u003e \u003c\/ul\u003e","brand":"BRP","offers":[{"title":"Default Title","offer_id":52023915937973,"sku":"QBP223598","price":6.23,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1233092_qbp223598.jpg?v=1763260586"},{"product_id":"qbp596124","title":"Jabsco Marine Engine Oil Drain Pump, For OMC and MerCruiser 3\/4 NH Threaded Dipstick Tubes, 2 ft 1\/2 in ID Hose, Brass","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Jabsco 34060-0130 is a manual engine oil drain pump that threads onto marine engine dipstick tubes with a male 3\/4 in. garden hose fitting, including OMC and MerCruiser 3\/4 NH threaded dipstick tubes. Its polished brass construction and hand-operated plunger give you a direct way to remove used oil through the dipstick tube without adding a 12V or 24V pump to the boat.\u003c\/p\u003e\u003cp\u003eThis pump includes 2 ft of 1\/2 in. ID drain hose and measures about 10-1\/4 in. long with a 1-1\/4 in. cylinder diameter. That compact format works well in engine spaces where access is tight and a simple oil-change setup is easier to manage than a fixed extraction system.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eManual hand pump operation with no electrical hookup required\u003c\/li\u003e\n\u003cli\u003eThreads onto dipstick tubes with a male 3\/4 in. garden hose style fitting\u003c\/li\u003e\n\u003cli\u003eCompatible with OMC and MerCruiser 3\/4 NH threaded dipstick tube connections\u003c\/li\u003e\n\u003cli\u003eIncludes 2 ft of 1\/2 in. ID drain hose for routing oil to a waste container\u003c\/li\u003e\n\u003cli\u003ePolished brass pump body in a compact 10-1\/4 in. x 1-1\/4 in. format\u003c\/li\u003e\n\u003cli\u003eOne-hand pumping action for controlled oil removal in confined engine bays\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCheck the top of the engine dipstick tube before ordering. This pump is meant for engines that have a threaded male 3\/4 in. garden hose style connection at the dipstick tube, not for probe-style extraction through an open dipstick tube.\u003c\/p\u003e\u003cp\u003eIt is a good match for boat owners servicing engines that already use this threaded dipstick-tube arrangement and want a straightforward manual tool for routine oil changes.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe pump screws directly onto the dipstick tube connection, and the supplied hose carries the drained oil into a separate container. Because it is hand-operated, it gives you steady control when working in a cramped engine room, at the dock, or in a yard where shore power and extra equipment may not be convenient.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eManual engine oil drain pump\u003c\/li\u003e\n\u003cli\u003e2 ft of 1\/2 in. ID drain hose\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":52024014733493,"sku":"QBP596124","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330084_qbp596124.jpg?v=1780192086"},{"product_id":"qbp585040","title":"Jabsco 17820 Series Oil Change System, Reversible Pump, 5-Port Manifold, 3 Ball Valves","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Jabsco 17820 Series is a permanent oil change system for engine room installation, with a flexible impeller pump and manifold that connects to engine oil pans or transmission sumps. It is offered in 12V and 24V versions, and the shared system layout includes a bronze pump body, nitrile impeller, Buna lip type seal, and 1\/2 in NPT full-flow ball valves.\u003c\/p\u003e\u003cp\u003eThis system is meant for boats where oil service needs to be cleaner and more controlled than working with a loose portable pump. The manifold is factory fitted with three ball valves for three oil reservoirs and can be expanded with two additional valves to serve up to five oil reservoirs. The reversing switch lets the pump remove used oil and then pump a measured amount of new oil back into the engine or transmission.\u003c\/p\u003e\u003cp\u003eThe 17820 Series measures 6-1\/4 in high, 10-7\/8 in long, and 10-3\/16 in wide, with a weight of 9 lb. Its covered layout helps protect the valves from being bumped open, and the cover will not close unless the supplied valves are in the fully closed position.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePermanent engine room oil change system for engines and transmissions that are plumbed to a central manifold.\u003c\/li\u003e\n\u003cli\u003eFlexible impeller pump with a bronze body, nitrile impeller, and Buna lip type seal for oil transfer service.\u003c\/li\u003e\n\u003cli\u003eIntegral reversing switch supports pumping old oil out and pumping a measured amount of new oil back in.\u003c\/li\u003e\n\u003cli\u003eThree factory fitted 1\/2 in NPT full-flow ball valves serve three oil reservoirs, with the manifold able to accept two additional valves for up to five reservoirs.\u003c\/li\u003e\n\u003cli\u003eReversible permanent magnet motor complies with USCG 183.410 and ISO 8846 Marine ignition protection requirements.\u003c\/li\u003e\n\u003cli\u003eCovered valve area helps reduce accidental valve movement during normal engine room activity.\u003c\/li\u003e\n\u003cli\u003eSelf-priming pump may be positioned up to 3 ft above the oil source when the installation layout requires it.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe Jabsco 17820 Series is offered in two voltage configurations so the oil change system can match the vessel electrical system.\u003c\/p\u003e\u003cp\u003eThe pump, manifold layout, body material, impeller material, seal type, valve size, dimensions, and general installation approach remain consistent across the 17820 Series. The voltage, amp draw, fuse or breaker size, and wire sizing requirements vary by variant.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e17820-0012: Voltage 12 Volts. This version draws 10 amps and uses a 15 amp fuse or breaker, making it the 12V configuration for boats with a 12V DC engine room supply.\u003c\/li\u003e\n\u003cli\u003e17820-0024: Voltage 24 Volts. This version draws 5 amps and uses an 8 amp fuse or breaker, making it the 24V configuration for vessels with a 24V DC system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe pump and manifold assembly can be mounted in different orientations, but a vertical installation should keep the motor from sitting below the pump head. That placement helps keep oil away from the motor if the shaft seal ever leaks.\u003c\/p\u003e\u003cp\u003eInstall the system where hose runs to the engines and transmission sumps can stay as short and straight as practical. Heavy duty reinforced Type A fuel hose is used for the oil connections, with permanent type end fittings similar to those used on onboard fuel or gas hose assemblies.\u003c\/p\u003e\u003ch6\u003eElectrical and system fit\u003c\/h6\u003e\u003cp\u003eThe unit connects to an overload protected electrical distribution panel using marine grade stranded copper wire sized for the run length and the selected voltage model. The 12V version uses larger wire as run length increases, while the 24V version keeps #16 AWG wire across the listed run lengths up to 50 ft total circuit length.\u003c\/p\u003e\u003cp\u003eFor the 12V model, the listed amp draw is 10 amps with a 15 amp fuse or breaker. For the 24V model, the listed amp draw is 5 amps with an 8 amp fuse or breaker. These values are important when checking available panel capacity and planning the circuit before installation.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis system fits cruising boats, sportfishing boats, and service-focused engine rooms where routine oil changes are handled onboard. It is especially useful when the vessel has more than one engine or transmission sump and the owner wants a fixed, labeled manifold rather than moving hoses from point to point during every service.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWarm oil flows more easily, so normal use involves running the engine briefly before draining to reduce viscosity. The pump should be switched off as soon as flow stops, and it should not be allowed to run dry for more than about thirty seconds because the flexible impeller can be damaged.\u003c\/p\u003e\u003cp\u003eSludge in the system can restrict flow and place extra load on the flexible impeller. Before any service work, close the system valves and turn off power to the pump so it cannot be started while the pump head, impeller, or seal area is being inspected.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"12 Volts","offer_id":52581963333813,"sku":"QBP585040-V1","price":889.99,"currency_code":"USD","in_stock":true},{"title":"24 Volts","offer_id":52581963366581,"sku":"QBP585040-V2","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1334384_qbp585040.webp?v=1780201814"},{"product_id":"qbp852810","title":"Jabsco 17850 \u0026 17860 Series Oil Change Systems, 12V DC, 3.5 gal Capacity","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Jabsco 17850 \u0026amp; 17860 Series is a range of 12V DC oil change systems for removing engine oil through the dipstick tube using a self-contained pump and container. Each system uses a 12V DC motor with an integral power switch, draws 2A, and is protected by a 5A fuse, making it a practical fit for boats with a standard 12V battery system.\u003c\/p\u003e\u003cp\u003eBoth configurations use a 3.5 gal (13.2 L) maximum-capacity container, 6 ft (1.8 m) battery leads with alligator clips, and an 8 ft (2.4 m) suction tube that is resistant to oil and heat. The pump body is polypropylene, with a Santoprene diaphragm and Viton valves for engine-oil service.\u003c\/p\u003e\u003cp\u003eThis type of oil changer is useful where draining into a pan is awkward, such as in compact engine rooms, sailboat compartments, fishing boats, and cruisers with limited access below the engine. It keeps the oil change process contained and lets the user move the waste oil away for proper recycling after service.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12V DC operation with integral power switch, 2A amp draw, and 5A fuse requirement for connection to a boat battery.\u003c\/li\u003e\n\u003cli\u003eExtracts oil through the dipstick tube using a 1\/4 in (6 mm) probe, which helps in engine spaces where bottom-drain access is limited.\u003c\/li\u003e\n\u003cli\u003e3.5 gal (13.2 L) maximum container capacity across both bucket and flat tank configurations.\u003c\/li\u003e\n\u003cli\u003eIncludes 6 ft (1.8 m) battery leads with alligator clips and an 8 ft (2.4 m) suction tube for reach around typical onboard engine installations.\u003c\/li\u003e\n\u003cli\u003ePolypropylene pump body, Santoprene diaphragm, and Viton valves support use with engine oil.\u003c\/li\u003e\n\u003cli\u003eThe 17850 bucket version weighs 6 lb (2.7 kg) empty, while the 17860 flat tank version weighs 7 lb (3.17 kg).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe series is offered in two configurations that use the same basic 12V oil extraction concept but differ in system type and container layout.\u003c\/p\u003e\u003cp\u003eBoth variants share the 12V DC motor, 2A draw, 5A fuse size, 3.5 gal (13.2 L) container capacity, 6 ft (1.8 m) battery leads, 8 ft (2.4 m) suction tube, polypropylene pump body, Santoprene diaphragm, and Viton valves. The main difference is the receiver style, with one version using an upright bucket and the other using a flat tank.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e17850-1012: Engine Oil Change System with bucket container. The upright bucket layout gives a straightforward receiver shape for onboard engine service and has an empty weight of 6 lb (2.7 kg).\u003c\/li\u003e\n\u003cli\u003e17860-2012: Flat Tank Oil Changer System with flat tank container. The lower-profile tank format helps when storage space is tight and has an empty weight of 7 lb (3.17 kg).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe system is powered by connecting the alligator clips to a 12V DC battery with the pump switch in the off position. In use, the engine oil is warmed first, the container is vented, and the suction probe is inserted through the dipstick tube until it reaches the oil pan. A typical 5 quart (5 liter) engine takes around 10 minutes to drain once the pump is running and the oil is warm.\u003c\/p\u003e\u003cp\u003eThe pump is intended for engine oil removal, not for gasoline, solvents, thinners, or other flammable liquids with a flash point below 100°F (37.8°C). It is also important to keep the battery area ventilated and to switch the pump off before connecting or removing the battery clips.\u003c\/p\u003e\u003ch6\u003eCompatibility and onboard fit\u003c\/h6\u003e\u003cp\u003eThis range is for 12V DC systems. It is a good match for boat owners and service technicians who handle routine oil changes on auxiliary engines, generators, or inboard engine spaces where gravity draining is messy or difficult.\u003c\/p\u003e\u003cp\u003eThe bucket version fits service setups where an upright container is easy to handle. The flat tank version works well where the container needs to be stored in a lower compartment or moved around tighter lockers after the oil change is complete.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter use, the container should be emptied into a proper waste-oil container for recycling. For longer storage periods, the pump can be flushed with a water-based degreaser solution so the oil path is not left loaded with old oil residue.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Engine Oil Change System \/ Bucket","offer_id":52581963399349,"sku":"QBP852810-V1","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Flat Tank Oil Changer System \/ Flat Tank","offer_id":52581963432117,"sku":"QBP852810-V2","price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1334385_qbp852810.jpg?v=1780201816"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/oil-change-pumps.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}