{"title":"Multifunction Packages","description":"","products":[{"product_id":"qbp314235","title":"Raymarine i70s System Pack, Wind Depth Speed Transducers, 4.1 in Display, SeaTalkng, NMEA 2000, IPX6\/IPX7","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine T70226 is an i70s sailing instrument system pack for bringing wind, depth, speed and temperature data onto a clear multifunction display at the helm, nav station or cockpit instrument pod. The pack is built around the Raymarine i70s color instrument display and includes the transducer hardware and SeaTalkng network parts needed for a complete wind, depth and speed instrument setup.\u003c\/p\u003e\u003cp\u003eThe i70s display uses a 4.1 in TFT LCD screen with 320 x 240 resolution, 16-bit color and 1,200 cd\/m2 brightness, so key numbers stay readable in strong daylight. Large characters up to 1.7 in high help when the display is mounted farther away, such as on a mast pod, overhead panel or companionway-facing cockpit location.\u003c\/p\u003e\u003cp\u003eThis system fits boats using Raymarine SeaTalkng networking and can integrate with NMEA 2000 data through the proper SeaTalkng to DeviceNet adapter. It is a practical match for sailboats that need a clean upgrade from separate analog instruments to a networked display for wind angle, wind speed, boat speed, depth and related navigation data.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4.1 in sunlight-viewable i70s color display with 320 x 240 resolution and 1,200 cd\/m2 brightness for clear instrument readings on deck.\u003c\/li\u003e\n\u003cli\u003eDisplays wind, speed, depth, tridata, engine, environment, fuel and navigation data when the matching sensors and network data are available.\u003c\/li\u003e\n\u003cli\u003eOptically bonded display construction helps maintain contrast and reduces the chance of fogging inside the display.\u003c\/li\u003e\n\u003cli\u003eAIS repeater mode can show nearby AIS targets from a compatible NMEA 2000 AIS receiver, including the closest 25 AIS-equipped vessels.\u003c\/li\u003e\n\u003cli\u003eSeaTalkng networking supports integration with Raymarine instrument systems, with NMEA 2000 compatibility through the correct adapter cable.\u003c\/li\u003e\n\u003cli\u003eiTC-5 converter brings analog depth, speed, temperature, wind, compass and rudder transducer signals onto the SeaTalkng network.\u003c\/li\u003e\n\u003cli\u003eIPX6 and IPX7 waterproof rating for the i70s display supports exposed cockpit and helm installations where spray and washdowns are part of normal use.\u003c\/li\u003e\n\u003cli\u003eLow 1.7 W display power consumption and 12 V dc nominal supply suit sailboats where battery draw matters during longer passages.\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -25 C to +55 C supports use across cold mornings, hot cockpits and changing offshore conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 E70327 i70s instrument display\u003c\/li\u003e\n\u003cli\u003e1 E70010 iTC-5 instrument transducer converter\u003c\/li\u003e\n\u003cli\u003e1 A22154 DST800 depth, speed and temperature transducer\u003c\/li\u003e\n\u003cli\u003e1 E22078 standard forward wind transducer with 100 ft cable\u003c\/li\u003e\n\u003cli\u003e1 A06031 SeaTalkng backbone terminator\u003c\/li\u003e\n\u003cli\u003e1 A06074 SeaTalkng inline terminator\u003c\/li\u003e\n\u003cli\u003e1 A06068 SeaTalkng backbone cable, 9 m\u003c\/li\u003e\n\u003cli\u003e1 A06049 SeaTalkng power cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe i70s display is suited to surface mounting at the helm, cockpit bulkhead, pedestal pod or nav area where crew can check the numbers quickly while trimming sails or watching depth. The iTC-5 converter is typically mounted in a protected location near the transducer cable runs and then connected to the SeaTalkng backbone for data and power.\u003c\/p\u003e\u003cp\u003eThe wind transducer gives the system masthead wind input, while the DST800 through-hull transducer supplies depth, boat speed through water and temperature data. For a clean installation, confirm the through-hull location, hull material requirements and cable routing before drilling or replacing an existing transducer.\u003c\/p\u003e\u003ch6\u003eNetwork compatibility\u003c\/h6\u003e\u003cp\u003eThis pack is made for a SeaTalkng instrument network and works well on boats that already carry Raymarine displays, autopilots or sensors. With the correct adapter, the i70s can also read compatible NMEA 2000 network data, which is useful when engine, navigation or AIS information is already available elsewhere on board.\u003c\/p\u003e\u003cp\u003eThe display supports user-selectable data sources, which helps on boats with more than one source for the same information, such as GPS position or depth. That matters when refitting a sailboat in stages, where older analog sensors, newer network devices and multifunction displays may all be present during the upgrade.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis sailpack is a good fit for coastal cruisers, club racers and offshore-capable sailboats that need one readable instrument hub instead of scattered single-purpose gauges. It keeps the core sailing numbers close at hand for trimming, piloting, anchoring and navigating shallow approaches.\u003c\/p\u003e\u003cp\u003eFor best results, match the installation to the boat’s network layout and confirm that the transducer types and through-hull requirements suit the vessel before installation. Once fitted, the system gives the crew a straightforward way to monitor the data that matters most while sailing.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52020980383925,"sku":"QBP314235","price":1759.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331061_qbp314235.webp?v=1780191615"},{"product_id":"qbp238962","title":"Raymarine i60 Wireless Wind and Backbone Kit, SeaTalkng, Micro-Talk Gateway","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine T70346 is a wireless i60 wind and backbone kit for sailboats that need apparent wind speed and angle at the helm without running a mast cable. It combines an i60 Wind instrument display, a solar-powered wireless masthead wind transmitter, a Micro-Talk wireless performance sailing gateway, a T113 wireless remote display, and the SeaTalkng backbone parts needed to tie the system into a Raymarine instrument network.\u003c\/p\u003e\u003cp\u003eThe i60 display uses an analog needle with an LCD readout, so wind angle can be read quickly while still showing digital wind data. The display runs from a 12V DC system, operates across a 10 to 16V DC range, and carries an IPX6 waterproof rating, which suits cockpit and helm installations exposed to spray and washdowns.\u003c\/p\u003e\u003cp\u003eThe wireless wind transmitter sends masthead data over Raymarine Micronet wireless technology, while the Micro-Talk gateway passes that data onto the SeaTalkng network for use with compatible Raymarine instruments, multifunction displays, and autopilots. The i60 display measures 110 mm wide, 115 mm high, and 44 mm deep, making it a familiar fit for standard instrument panel layouts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWireless masthead wind transmitter reduces the need to run a cable down the mast, which is useful for refits and boats where mast wiring is difficult to access.\u003c\/li\u003e\n\u003cli\u003ei60 Wind display shows wind angle on an analog needle with supporting data on an LCD screen.\u003c\/li\u003e\n\u003cli\u003eBacklit display and keypad help keep wind data readable at night and during low-light watchkeeping.\u003c\/li\u003e\n\u003cli\u003eSeaTalkng network connection lets wind data feed compatible Raymarine displays, instruments, and autopilots.\u003c\/li\u003e\n\u003cli\u003eMicro-Talk gateway bridges Raymarine Micronet wireless instruments with wired SeaTalkng systems.\u003c\/li\u003e\n\u003cli\u003eSolar-powered wireless transmitter and remote display use integrated lithium batteries, with autonomous operation up to 300 hours when fully charged.\u003c\/li\u003e\n\u003cli\u003eT113 wireless remote display can repeat, configure, and control Micronet instrument data from different positions on board.\u003c\/li\u003e\n\u003cli\u003ei60 display has two SeaTalkng connections plus wind transducer connections for flexible integration with existing Raymarine instrument layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis kit is especially useful when adding wind instrumentation to an existing sailboat or upgrading an older helm without pulling new wiring through the mast. The masthead transmitter mounts at the top of the rig and sends wind data wirelessly, while the i60 display can be mounted at the helm, cockpit bulkhead, or nav area where wind angle and speed are easiest to see.\u003c\/p\u003e\u003cp\u003eThe included backbone hardware helps establish the SeaTalkng network path for the display and gateway. For boats already using Raymarine instruments, the kit keeps the wind system within the same ecosystem instead of creating a separate display that cannot share data around the boat.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe i60 display is intended for 12V DC onboard systems and draws low power, with typical display-only consumption under 1W. The Micro-Talk gateway connects into the SeaTalkng network and carries data such as wind angle, wind speed, depth, boat speed, temperature, heading, GPS data, time, date, and navigation information between compatible wireless and wired Raymarine devices.\u003c\/p\u003e\u003cp\u003eFor sailing use, the practical value is not only seeing wind at the helm. Wind data can also support compatible autopilot sailing modes and give a more complete instrument picture on Raymarine multifunction displays, which is useful during coastal cruising, club racing, and longer passages where crew may move between the cockpit and nav station.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis kit is a good match for sailors who want masthead wind data without the work of replacing or installing a wired mast cable. It also suits boats where crew want wind information at more than one position, since the wireless remote display can be carried or kept in its bracket for quick checks away from the main instrument display.\u003c\/p\u003e\u003cp\u003eOn cruising boats, the system helps with sail trim, watchkeeping, and autopilot use. On race-oriented boats, it keeps wind angle and wind speed visible while reducing mast wiring complexity during installation or refit work.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ei60 Wind instrument display with 400 mm spur cable\u003c\/li\u003e\n\u003cli\u003eMicro-Talk wireless performance sailing gateway with 3 m spur cable\u003c\/li\u003e\n\u003cli\u003eWireless masthead wind transmitter\u003c\/li\u003e\n\u003cli\u003eT113 multifunction wireless remote display\u003c\/li\u003e\n\u003cli\u003eSeaTalkng power cable\u003c\/li\u003e\n\u003cli\u003e5 m SeaTalkng backbone cable\u003c\/li\u003e\n\u003cli\u003eSeaTalkng 5-way block\u003c\/li\u003e\n\u003cli\u003eTwo SeaTalkng network terminators\u003c\/li\u003e\n\u003cli\u003eSeaTalkng T-connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52020980777141,"sku":"QBP238962","price":1999.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331064_qbp238962.jpg?v=1780191616"},{"product_id":"qbp600993","title":"Raymarine i70s Wireless Wind Instrument Kit, DST800, SeaTalkng","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine T70347 is an i70s wireless wind instrument package for sailboats that need wind, depth, speed, log, and water temperature data on a Raymarine instrument network. It combines the i70s multifunction color instrument display, a T120 wireless masthead wind transducer, a Micro-Talk Wireless Performance Sailing Gateway, a T113 wireless remote display, an Airmar DST800 through-hull transducer, and the SeaTalkng parts needed to build a basic backbone.\u003c\/p\u003e\u003cp\u003eThe i70s display gives the helm or cockpit a 4.1 inch color screen for viewing wind, speed, depth, navigation, engine, fuel, environment, and AIS repeater data when those data sources are available on the network. The display runs from a 12 V DC SeaTalkng supply, with a 9 V DC to 16 V DC operating range and protection up to 32 V DC, so it suits typical 12 V onboard electronics installations.\u003c\/p\u003e\u003cp\u003eThis package is most useful for sailors who want wind data without running a cable down the mast, while still keeping the rest of the instrument system on a wired SeaTalkng backbone. The Micro-Talk gateway bridges the wireless Micronet wind components to SeaTalkng, and NMEA 2000 integration is possible with the correct SeaTalkng to DeviceNet adaptor.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eComplete sailing instrument package with i70s color display, wireless wind sensing, wireless remote display, DST800 through-hull depth, speed, and temperature sensing, and SeaTalkng network hardware.\u003c\/li\u003e\n\u003cli\u003eT120 masthead transducer measures apparent wind speed and direction over Raymarine wireless Micronet, reducing the need to run wind wiring through the mast.\u003c\/li\u003e\n\u003cli\u003eMicro-Talk gateway connects Micronet wireless data to a wired SeaTalkng network and supports wind angle, wind speed, depth, boat speed, temperature, heading, GPS, time, date, and navigation data.\u003c\/li\u003e\n\u003cli\u003ei70s display has a 4.1 inch TFT LCD screen with 320 x 240 resolution, 16 bit color, and 1,200 cd\/m2 brightness for use at the helm or companionway.\u003c\/li\u003e\n\u003cli\u003ei70s waterproofing is rated IPX6 and IPX7, which matters for exposed cockpit mounting where spray and washdowns are part of normal boat use.\u003c\/li\u003e\n\u003cli\u003eDST800 through-hull transducer combines depth, speed through water, and water temperature in a single 2 inch fitting.\u003c\/li\u003e\n\u003cli\u003eSeaTalkng backbone parts are included, with a 5 m backbone cable, power cable, 5-way block, T-connector, and network terminators for a basic instrument network layout.\u003c\/li\u003e\n\u003cli\u003eExpandable with compatible Raymarine wired and wireless instruments, sensors, multifunction displays, and autopilots as the onboard system grows.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe wireless wind transmitter mounts at the masthead and sends wind data without a long mast cable run, which can simplify a refit on an existing rig. The Micro-Talk gateway mounts on board and plugs into the SeaTalkng network, so it should be located where it has a suitable network connection and a practical wireless path to the Micronet components.\u003c\/p\u003e\u003cp\u003eThe DST800 is a through-hull transducer, so installation requires a suitable hull location, access inside the boat, and correct sealing practice for the hull material and fitting. The i70s display is surface mounted and connects to the network through its SeaTalkng connector.\u003c\/p\u003e\u003ch6\u003eElectrical and network compatibility\u003c\/h6\u003e\u003cp\u003eThe system is built around Raymarine SeaTalkng networking. The i70s display and Micro-Talk gateway are powered from the SeaTalkng network, and both operate on a 12 V DC nominal supply with a 9 V DC to 16 V DC operating range.\u003c\/p\u003e\u003cp\u003eFor boats with NMEA 2000 backbones, a SeaTalkng to DeviceNet adaptor is required. This keeps the package practical for mixed electronics installations, but the exact network layout should be checked before ordering cables or planning the final mounting positions.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis package fits coastal cruising boats, club racing sailboats, and performance-minded cruising setups where wind shifts, apparent wind angle, boat speed, and depth all need to be visible without spreading data across separate stand-alone instruments. It is also a practical starting point for a Raymarine-based instrument upgrade because the kit includes the display, sensors, gateway, remote display, and core network parts in one package.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMicro-Talk Wireless Performance Sailing Gateway with spur cable\u003c\/li\u003e\n\u003cli\u003eT120 Wireless Masthead Transducer\u003c\/li\u003e\n\u003cli\u003eT113 Multifunction Wireless Remote Display\u003c\/li\u003e\n\u003cli\u003ei70s Multifunction Color Instrument Display with spur cable\u003c\/li\u003e\n\u003cli\u003eAirmar DST800 depth, speed, and temperature through-hull transducer\u003c\/li\u003e\n\u003cli\u003eSeaTalkng power cable\u003c\/li\u003e\n\u003cli\u003eSeaTalkng 5 m backbone cable\u003c\/li\u003e\n\u003cli\u003eSeaTalkng 5-way block\u003c\/li\u003e\n\u003cli\u003eSeaTalkng network terminators\u003c\/li\u003e\n\u003cli\u003eSeaTalkng T-connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52020980809909,"sku":"QBP600993","price":2199.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331065_qbp600993.jpg?v=1780191616"},{"product_id":"qbp571289","title":"Raymarine i70s Wireless Wind Instrument Kit, DST800 Transducer, EV1 Heading Sensor","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine T70348 is a complete i70s sailing instrument package that brings wireless wind, heading, depth, speed and water temperature data onto a SeaTalkng network. It is built around the i70s multifunction color instrument, the Micro-Talk Wireless Performance Sailing Gateway, a T120 wireless masthead transducer, an EV1 heading sensor and a DST800 through-hull transducer.\u003c\/p\u003e\u003cp\u003eThe i70s display uses a 4.1 inch TFT LCD with 320 x 240 resolution and IPx6\/IPx7 water protection, making it suitable for exposed helm and cockpit installations. The Micro-Talk gateway links Raymarine Micronet wireless instruments with wired SeaTalkng equipment, while the EV1 9-axis sensor supplies heading and motion data for compatible onboard electronics.\u003c\/p\u003e\u003cp\u003eThis package suits sailboats that need a clean instrument upgrade without running a conventional wind cable down the mast. It is especially useful for cruising and club-racing boats where wind angle, boat speed, depth, water temperature and stable heading data all need to be visible at the helm.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eComplete instrument package for wind, heading, depth, speed through water and water temperature data on compatible Raymarine systems.\u003c\/li\u003e\n\u003cli\u003eIncludes the i70s multifunction display with a 4.1 inch screen, large data views and SeaTalkng networking.\u003c\/li\u003e\n\u003cli\u003eMicro-Talk gateway bridges Raymarine Micronet wireless instruments with wired SeaTalkng equipment and compatible autopilots.\u003c\/li\u003e\n\u003cli\u003eT120 wireless masthead transducer sends wind speed and wind angle data without a wired mast run.\u003c\/li\u003e\n\u003cli\u003eEV1 heading sensor uses 9-axis sensing to monitor heading, pitch, roll and yaw, with dynamic accuracy within 2 degrees.\u003c\/li\u003e\n\u003cli\u003eDST800 through-hull transducer combines depth, speed and temperature sensing in a single 2 inch fitting.\u003c\/li\u003e\n\u003cli\u003eSeaTalkng backbone parts are included for a basic network, including power, backbone cabling and a 5-way connector block.\u003c\/li\u003e\n\u003cli\u003ei70s supports SeaTalk, SeaTalkng and NMEA 2000 integration when the correct adapter cables are used.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe kit is intended to form a basic SeaTalkng instrument network. The included backbone cable, power cable and 5-way block give the installer a starting point for connecting the i70s display, Micro-Talk gateway, EV1 heading sensor and related network devices.\u003c\/p\u003e\u003cp\u003ePlan the installation around three main locations: the i70s display at the helm or navigation area, the T120 wind transducer at the masthead and the DST800 in a suitable through-hull position. The EV1 heading sensor can be mounted above or below deck, but it should be placed where magnetic interference and heavy vibration are minimized.\u003c\/p\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eThe i70s display can show wind, speed, depth, tridata, engine, environment, fuel and navigation information when the required data is present on the network. For NMEA 2000 backbones, SeaTalkng to DeviceNet adapter cabling is required.\u003c\/p\u003e\u003cp\u003eThe EV1 can supply heading information to compatible Raymarine chartplotters, radar systems, instruments and autopilots. The Micro-Talk gateway also allows wireless wind data to be shared with compatible wired Raymarine equipment, which helps when adding wireless wind sensing to an existing SeaTalkng-based installation.\u003c\/p\u003e\u003ch6\u003eMarine use notes\u003c\/h6\u003e\u003cp\u003eThis package is a strong match for sailboats where cockpit readability, wind data and heading stability matter during sail trim, coastal cruising and race starts. The wireless masthead approach can simplify refits where pulling new wind wiring through the mast would be difficult or expensive.\u003c\/p\u003e\u003cp\u003eThe DST800 still requires a proper through-hull installation, so hull material, access inside the boat and haul-out timing should be checked before ordering. The electronics are built for 12 V DC SeaTalkng systems, so power planning should follow Raymarine network loading and marine electrical practice.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMicro-Talk Wireless Performance Sailing Gateway with 3 m spur cable\u003c\/li\u003e\n\u003cli\u003eT120 wireless masthead transducer\u003c\/li\u003e\n\u003cli\u003eT113 multifunction wireless remote display\u003c\/li\u003e\n\u003cli\u003ei70s multifunction color instrument display with 400 mm spur cable\u003c\/li\u003e\n\u003cli\u003eEV1 heading sensor\u003c\/li\u003e\n\u003cli\u003eDST800 depth, speed and temperature through-hull transducer\u003c\/li\u003e\n\u003cli\u003eSeaTalkng power cable\u003c\/li\u003e\n\u003cli\u003e5 m SeaTalkng backbone cable\u003c\/li\u003e\n\u003cli\u003eSeaTalkng 5-way block\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52020980842677,"sku":"QBP571289","price":2749.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331071_qbp571289.jpg?v=1780191617"},{"product_id":"qbp409580","title":"Raymarine i70s Wireless Wind Instrument Kit, DST800, EV1 Heading Sensor, SeaTalkng Backbone","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine T70349 is an i70s wireless wind, depth, speed, temperature, heading, and SeaTalkng backbone package for sailing instruments. It brings together the i70s multifunction color display, T222 wireless vertical masthead wind transducer, Micro-Talk wireless gateway, EV1 heading sensor, T113 wireless remote display, and DST800 through-hull transducer so a sailboat can show wind, depth, speed through water, water temperature, and heading data from one integrated package.\u003c\/p\u003e\u003cp\u003eThe i70s display has a 4.1 inch TFT LCD screen with 320 x 240 resolution, 1,200 cd\/m2 brightness, IPX6 and IPX7 waterproofing, and a 9 to 16 V dc operating range. The Micro-Talk gateway also runs from the SeaTalkng network at 12 V dc and bridges Raymarine Micronet wireless instruments with SeaTalkng and NMEA 2000 systems through the proper adapter.\u003c\/p\u003e\u003cp\u003eThis package makes sense for racing sailboats and performance cruisers where wind angle, wind speed, heading, boat speed, depth, and temperature need to be visible at the helm, on deck, and across the onboard instrument network.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSystem package combines i70s display, wireless masthead wind sensing, EV1 heading data, DST800 through-hull depth, speed and temperature sensing, wireless remote display, and SeaTalkng backbone components.\u003c\/li\u003e\n\u003cli\u003eT222 wireless vertical masthead transducer places the wind sensor above the masthead to reduce interference from sails, rigging, updraft, and turbulence.\u003c\/li\u003e\n\u003cli\u003eMicro-Talk gateway links Raymarine Micronet wireless instruments with wired SeaTalkng equipment and supports NMEA 2000 integration when the correct DeviceNet adapter is used.\u003c\/li\u003e\n\u003cli\u003ei70s display shows digital, analog, and graphical data pages for wind, speed, depth, tridata, engine, environment, fuel, navigation, and AIS repeater information from compatible network sources.\u003c\/li\u003e\n\u003cli\u003eEV1 sensor uses a 9-axis sensing system for heading, pitch, roll, and yaw data, with heading support for autopilots, radar overlay, MARPA, chartplotters, and instruments.\u003c\/li\u003e\n\u003cli\u003eDST800 transducer combines depth, speed through water, and water temperature in a 2 inch through-hull fitting with a 200 kHz depth frequency.\u003c\/li\u003e\n\u003cli\u003ei70s and Micro-Talk components are rated IPX6 and IPX7, suitable for exposed cockpit and deck-adjacent installations where spray and washdowns are part of normal boat use.\u003c\/li\u003e\n\u003cli\u003eIncluded T113 remote display repeats and controls wireless instrument data, with solar power, integrated lithium batteries, three backlight levels, and submersion rating to 33 ft or 10 m.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe kit includes the core SeaTalkng cables, connectors, terminators, power cable, and 5-way block needed to establish a basic instrument backbone. The i70s display is normally surface mounted at the helm, nav station, or cockpit panel, while the Micro-Talk gateway can be surface mounted on deck or below deck where it has a suitable connection to the SeaTalkng network and wireless instruments.\u003c\/p\u003e\u003cp\u003eThe DST800 is a through-hull sensor, so hull material, existing transducer fittings, haul-out timing, and access inside the boat should be reviewed before installation. Its retractable housing with water valve helps with service access after the fitting is installed.\u003c\/p\u003e\u003ch6\u003eCompatibility and integration\u003c\/h6\u003e\u003cp\u003eThe i70s works with current SeaTalkng networks and can connect with NMEA 2000 networks through the required SeaTalkng to DeviceNet adapter. It can also be used with first generation SeaTalk networks when the correct SeaTalk to SeaTalkng adapter cable is added.\u003c\/p\u003e\u003cp\u003eThe EV1 heading sensor connects through SeaTalkng and can be mounted above or below deck. It is useful when the system needs stable heading information for sailing calculations, autopilot behavior, radar overlay, MARPA tracking, or chartplotter heading modes.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eOn a performance cruiser, this package gives the helm a clean view of the numbers that matter during sail trim, coastal passages, and changing weather. On a race boat, the wireless remote display and masthead wind sensor help crew monitor wind trends, speed trends, VMG to wind or waypoint, SOG, COG, performance graphing, and race timer information from useful positions on deck.\u003c\/p\u003e\u003cp\u003eIt is a strong fit for boats moving from older instrument layouts to a mixed wired and wireless Raymarine system, or for a new sailing electronics installation where the owner wants wind, depth, speed, temperature, and heading data in one coordinated instrument package.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eE70361 Micro-Talk Wireless Performance Sailing Gateway with 3 m spur cable\u003c\/li\u003e\n\u003cli\u003eT222 Wireless Vertical Masthead Transducer\u003c\/li\u003e\n\u003cli\u003eT113 Multifunction Wireless Remote Display\u003c\/li\u003e\n\u003cli\u003eE70327 i70s Multifunction Color Instrument Display with 400 mm spur cable\u003c\/li\u003e\n\u003cli\u003eE70096 Evolution EV1 Heading Sensor\u003c\/li\u003e\n\u003cli\u003eA22111 DST800 Depth, Speed, Temperature Through-Hull Transducer\u003c\/li\u003e\n\u003cli\u003eA06049 SeaTalkng Power Cable\u003c\/li\u003e\n\u003cli\u003eA06036 SeaTalkng Backbone Cable, 5 meters\u003c\/li\u003e\n\u003cli\u003eA06064 SeaTalkng 5-Way Block\u003c\/li\u003e\n\u003cli\u003eA06031 SeaTalkng Network Terminators, quantity 2\u003c\/li\u003e\n\u003cli\u003eA06028 SeaTalkng T-Connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52020988739765,"sku":"QBP409580","price":3999.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331078_qbp409580.jpg?v=1780191618"},{"product_id":"qbp460315","title":"Raymarine EV-150 Power Pilot Core Pack, No Drive, 12V, For Hydraulic Steering, 4.9-14.0 cu in Ram Capacity","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine T70407 is an EV-150 Power Pilot core pack for small to medium powerboats with hydraulic steering, supplied without a drive unit for installations that already have a compatible Type 1 12 V hydraulic drive or where the drive will be purchased separately. It is built around the ACU-150 actuator control unit, p70Rs control head, EV-1 sensor core, and Evolution cabling needed to create the main autopilot system.\u003c\/p\u003e\u003cp\u003eThis autopilot is intended for 12 V DC electrical systems only, with an operating voltage range of 10.8 V DC to 15.6 V DC. In a properly matched EV-150 hydraulic setup, it suits steering cylinder capacities from 4.9 cu. in. to 14.0 cu. in., or 80 cc to 230 cc, which covers many single outboard and single inboard hydraulic steering installations.\u003c\/p\u003e\u003cp\u003eThe EV-1 sensor core uses 9-axis sensing to track vessel motion, while Hydro-Balance technology helps compensate for hydraulic steering behavior such as elasticity and torque steer. For cruising, fishing, and route tracking, this gives the boat steadier course control without the long manual calibration process older autopilots often require.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eEV-150 core pack supplied without a hydraulic drive, suitable for repowers, upgrades, or installations where the drive unit is selected separately.\u003c\/li\u003e\n\u003cli\u003eWorks with 12 V DC systems only, with a confirmed operating range of 10.8 V DC to 15.6 V DC.\u003c\/li\u003e\n\u003cli\u003eSupports hydraulic steering setups in the 80 cc to 230 cc cylinder capacity range when paired with the correct Type 1 12 V hydraulic drive.\u003c\/li\u003e\n\u003cli\u003eIncludes the EV-1 sensor core with 9-axis vessel motion sensing for heading, pitch, roll, and yaw data.\u003c\/li\u003e\n\u003cli\u003eACU-150 actuator control unit has a maximum continuous drive current output of 7 A at supply voltage.\u003c\/li\u003e\n\u003cli\u003eSeaTalkng connectivity lets the control head, sensor core, and ACU communicate as part of the Raymarine autopilot network.\u003c\/li\u003e\n\u003cli\u003ep70Rs control head gives helm control through a sunlight-viewable 3.5 in display, rotary knob, and dedicated autopilot buttons.\u003c\/li\u003e\n\u003cli\u003eHydro-Balance steering control helps reduce drive hunting and course corrections on hydraulically steered boats.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis is the no-drive version, so the hydraulic drive is not included. The steering system must be checked for the correct drive type and steering cylinder capacity before installation, especially on boats with outboard hydraulic steering or single inboard hydraulic steering.\u003c\/p\u003e\u003cp\u003eThe ACU-150 connects into the SeaTalkng network and handles steering commands to the hydraulic drive. Its housing measures 180 mm wide, 140 mm high, and 52 mm deep, so it should be mounted where it is protected, serviceable, and close enough for clean cable routing to the network and steering drive connections.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis pack is a good match for owners upgrading an existing Raymarine autopilot installation or building an EV-150 system around a separately sourced Type 1 hydraulic drive. It is not a 24 V autopilot pack, and it should not be treated as a universal fit for all hydraulic steering systems without checking the steering cylinder volume and drive requirements.\u003c\/p\u003e\u003cp\u003eOn board, the system fits the needs of fishing boats, coastal cruisers, and small to medium powerboats where steady heading control, route tracking, and hands-off helm support are useful during longer runs or trolling work.\u003c\/p\u003e\u003ch6\u003eEnvironmental and electrical details\u003c\/h6\u003e\u003cp\u003eThe ACU-150 is rated for operation from -20 degrees C to +55 degrees C and storage from -30 degrees C to +70 degrees C. The connector panel is rated IPx2, while the drive electronics are rated IPx6, so mounting location still matters even though the electronics are built for the marine environment.\u003c\/p\u003e\u003cp\u003eStandby power consumption is 300 mA at 12 V, and the NMEA 2000 Load Equivalency Number is 1. These details help when planning the boat’s electronics load, network power, and breaker layout.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eACU-150 actuator control unit\u003c\/li\u003e\n\u003cli\u003ep70Rs autopilot control head\u003c\/li\u003e\n\u003cli\u003eEV-1 sensor core\u003c\/li\u003e\n\u003cli\u003eEvolution cabling kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52020988805301,"sku":"QBP460315","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331079_qbp460315.jpg?v=1780191619"},{"product_id":"qbp378228","title":"Veratron Navigation Kit Plus f\/Sailboats A2C1352150003","description":"\u003cp\u003e\u003cstrong\u003eNavigation Kit Plus for Sailboats\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eComplex boats need a smart solution. And we have it. VDO Marine OceanLink® display is the only product on the market able to interpret CAN, NMEA 2000® and analog signals without any additional external device.\u003c\/p\u003e \u003cp\u003eSafety, performance, entertainment. VDO Marine Navigation Kit and Navigation Kit Plus is the solution! Our Navigation Kits will become essential crew members which ensure you top performance in the open sea, even in the most extreme situations.\u003c\/p\u003e \u003cp\u003eAll in one box All you need is in one box including wiring harness and terminators. All products are REACH and RoHS compliant and NMEA 2000® certified.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNAVSENSOR (INCLUDED ONLY IN THE KIT NAVIGATION PLUS)\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe multifunctional AcquaLink™ NavSensor offers an inertial sensor with a GNSS receiver module to provide the accurate readings of speed of travel as well as pitch \u0026amp; roll. Compass readings can be displayed electronically thanks to the embedded Fluxgate compass, which also facilitate course corrections in electronic autopilots. The barometer and air temperature sensors are early indicators of forthcoming weather conditions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNavigation Kit Plus includes:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1x OceanLink 4.3 TFT Display\/Gateway - Black\u003c\/li\u003e \u003cli\u003e1x NMEA 2000 Wind Sensor\u003c\/li\u003e \u003cli\u003e1x Nav Sensor\u003c\/li\u003e \u003cli\u003e1x Triducer Airmar Sensor (Speed\/Depth\/Water Temp)\u003c\/li\u003e \u003cli\u003e1x 30m NMEA 2000 backbone (mast) cable\u003c\/li\u003e \u003cli\u003e3x 6m NMEA 2000 drop cable\u003c\/li\u003e \u003cli\u003e1x NMEA 2000 terminator (female)\u003c\/li\u003e \u003cli\u003e1x NMEA 2000 terminator (inline)\u003c\/li\u003e \u003cli\u003e3x NMEA 2000 T-splitter\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e \u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"Veratron","offers":[{"title":"Default Title","offer_id":52021096448181,"sku":"QBP378228","price":2979.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1242394_qbp378228.jpg?v=1763153427"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/multifunction-packages.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}