{"title":"Mounting Hardware","description":"","products":[{"product_id":"qbp534565","title":"Raymarine Transom Mounting Bracket, For CPT-60 Transducer","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine R70257 is a transom mount mounting bracket for the Raymarine CPT-60 transducer. It is used to secure the CPT-60 at the stern of the boat, where transom-mounted sonar hardware needs a stable position in clean water flow.\u003c\/p\u003e\u003cp\u003eThis bracket is a fit-specific Raymarine accessory for CPT-60 installations. It is a hardware component only, so it does not connect to 12V or 24V power, NMEA 2000, SeaTalk, or any other marine network. The key fit check is the transducer model: it is for CPT-60, not a universal transducer bracket.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade specifically for the Raymarine CPT-60 transducer, helping avoid the fit issues that can come with generic brackets.\u003c\/li\u003e\n\u003cli\u003eTransom mount format for stern-mounted sonar installations on compatible boats.\u003c\/li\u003e\n\u003cli\u003eUseful when replacing a missing or damaged CPT-60 bracket while keeping the existing transducer setup.\u003c\/li\u003e\n\u003cli\u003eHardware-only accessory with no voltage, fuse, software, or network requirements.\u003c\/li\u003e\n\u003cli\u003eSupports the mounting position needed for reliable CPT-60 operation when installed and aligned correctly on the transom.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis bracket is intended for the Raymarine CPT-60 transducer. Before ordering, match the transducer model on the boat to CPT-60 and confirm that the installation uses a transom mount location.\u003c\/p\u003e\u003cp\u003eIt should not be treated as a general bracket for other Raymarine transducers unless the other equipment specifically calls for the same mounting hardware.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMounting location matters on a transom transducer installation. The bracket should be positioned where the transducer can sit in smooth water flow and stay clear of trailer bunks, steps, trim tabs, strakes, and prop wash as much as the hull allows.\u003c\/p\u003e\u003cp\u003eAfter installation, the transducer angle and height should be checked on the water. Small adjustments at the bracket can make a noticeable difference in bottom tracking and sonar returns at speed.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis part is a practical match for boat owners, marine installers, or service shops working on a CPT-60 transducer installation where the original bracket is missing, damaged, or being refreshed during electronics maintenance.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52021125808309,"sku":"QBP534565","price":27.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330514_qbp534565.jpg?v=1780191624"},{"product_id":"qbp311424","title":"Raymarine CPT-S CHIRP Sonar Transducer Transom Bracket \u0026 Hardware","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine R70496 is a transom bracket and hardware kit for the Raymarine CPT-S transom mount CHIRP sonar transducer. It is a practical replacement or service part for keeping the CPT-S mounted correctly at the stern, where transducer position has a direct effect on depth readings and sonar performance while the boat is moving.\u003c\/p\u003e\u003cp\u003eThis kit is meant for the mounting side of the installation, not for replacing the transducer, cable, or display connection. It is useful when the original bracket has been damaged, misplaced during a refit, or needs to be renewed during transducer service on a fiberglass, wood, or metal transom installation using the CPT-S transom model.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for Raymarine CPT-S transom mount CHIRP sonar transducers.\u003c\/li\u003e\n\u003cli\u003eIncludes the transom mounting bracket and hardware needed for the bracket installation.\u003c\/li\u003e\n\u003cli\u003eSupports proper transducer placement on the stern so the CPT-S can be tested and adjusted during setup.\u003c\/li\u003e\n\u003cli\u003eUseful as a replacement kit when servicing, remounting, or repairing an existing CPT-S transom installation.\u003c\/li\u003e\n\u003cli\u003eAccessory kit only, with no transducer, cable, display, or sonar module included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFor best results, the bracket should be installed where the CPT-S can stay in clean water flow with minimal turbulence from strakes, through-hull fittings, trim tabs, or prop wash. A careful bracket position helps the transducer maintain bottom tracking and sonar returns when the boat is on plane.\u003c\/p\u003e\u003cp\u003eThe transducer height and angle should be checked with the boat in the water before the installation is finalized. This is especially important on planing hulls, where a small change at the transom can affect readings at speed.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is for Raymarine CPT-S transom mount installations. It should not be treated as a universal transducer bracket for other Raymarine transducers or third-party sonar products unless the existing equipment is specifically the CPT-S transom mount type.\u003c\/p\u003e\u003cp\u003eOwners replacing a damaged bracket should confirm the transducer body and cable are still in good condition before installation. When the CPT-S transducer itself is worn, cracked, or giving inconsistent readings, the bracket kit will not correct those electrical or sensing issues.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis part suits boat owners, installers, and service yards working on smaller fishing boats, runabouts, trailer boats, and coastal cruising boats that use a Raymarine CPT-S transom transducer. It is also helpful during refits where the transducer is being moved to a cleaner location on the transom.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCPT-S transom bracket\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52021224046773,"sku":"QBP311424","price":34.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330578_qbp311424.jpg?v=1780191626"},{"product_id":"qbp227127","title":"Edson Marine - Pivot Bracket - Backing Plate","description":"\u003ch4\u003eSeamless Navigation: Pivot Bracket with Backing Plate for Radar Masts\u003c\/h4\u003e \u003cp\u003eExperience unmatched flexibility and convenience with the Pivot Bracket with Backing Plate, designed to seamlessly integrate with Edson's Fold-Down Adapter for Radar Masts. This indispensable marine accessory is your go-to solution for optimizing radar performance on your vessel. Whether you're navigating low bridge clearances, preparing for the off-season, or accommodating trailer transport, this bracket ensures your radar mast adapts effortlessly to every situation. Its robust design and easy fold-down mechanism make it an essential tool for any seafaring adventure.\u003c\/p\u003e \u003ch4\u003eKey Features That Navigate Beyond Expectations\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eCompatible with Edson's Fold-Down Adapter for 2-3\/8\" and 3-1\/2\" Radar Masts\u003c\/li\u003e \u003cli\u003eEnables radar mast to fold down for easy storage and transport\u003c\/li\u003e \u003cli\u003eIdeal for vessels navigating areas with low bridge clearances\u003c\/li\u003e \u003cli\u003eSimple integration with 989-1 Right Angle Base for vertical surface mounting\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eDesigned for the Depths and Heights\u003c\/h4\u003e \u003cp\u003eOur Pivot Bracket with Backing Plate is not just another marine accessory; it's a testament to innovation in marine navigation. Crafted for compatibility with both 2-3\/8\" and 3-1\/2\" mast sizes, it offers a versatile solution for radar mast installation and adjustment. Whether you're setting sail on a small craft or commanding a larger vessel, this bracket keeps your radar accessible and operational, no matter the conditions.\u003c\/p\u003e \u003ch4\u003eScale and Scope: Compact yet Mighty\u003c\/h4\u003e \u003cp\u003eUnderstanding the spatial constraints on a vessel, we've engineered our Pivot Bracket to be as unobtrusive as possible without compromising on strength. Its compact dimensions ensure that it integrates smoothly with your radar mast setup, maintaining a low profile while providing the stability and support your navigation systems rely on.\u003c\/p\u003e","brand":"Edson Marine","offers":[{"title":"Default Title","offer_id":52023243800757,"sku":"QBP227127","price":164.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1212650_qbp227127.jpg?v=1763252661"},{"product_id":"qbp444633","title":"HEISE LED Lighting Systems - Front License Plate Mount - US Market","description":"\u003ch4\u003eIlluminate Your Path: HEISE Front License Plate Mount for US Market\u003c\/h4\u003e \u003cp\u003eEnhance your vehicle's lighting and visibility with the \u003cstrong\u003eHEISE Front License Plate Mount\u003c\/strong\u003e, specifically designed for the US market. This innovative mount allows for the seamless integration of Cube, Work, or Driving lights directly onto the front license plate area, providing a strategic lighting solution without compromising the vehicle's aesthetics. Whether navigating through dark trails or enhancing your vehicle's visibility on the road, this license plate mount is an essential addition for any adventurous spirit.\u003c\/p\u003e \u003ch4\u003eKey Features for Enhanced Lighting\u003c\/h4\u003e \u003cul\u003e \u003cli\u003ePerfectly designed to fit the front license plate area of US Market vehicles.\u003c\/li\u003e \u003cli\u003eCompatible with Cube, Work, or Driving lights, offering versatility in lighting choices.\u003c\/li\u003e \u003cli\u003eEasy installation process allows for a quick and hassle-free setup.\u003c\/li\u003e \u003cli\u003eSold individually, providing a simple solution for front-end illumination.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eRobust Construction for Durable Use\u003c\/h4\u003e \u003cp\u003eMade from high-quality materials, the HEISE Front License Plate Mount is built to withstand the rigors of off-road adventures and daily driving alike. Its durable construction ensures that your additional lights stay securely mounted, regardless of the terrain or weather conditions.\u003c\/p\u003e \u003ch4\u003eTechnical Specifications\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Specifically designed for US market vehicles.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eLight Compatibility:\u003c\/strong\u003e Fits Cube, Work, or Driving lights for a broad range of lighting setups.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eTransform your vehicle's lighting capabilities with the \u003cstrong\u003eHEISE Front License Plate Mount\u003c\/strong\u003e. It's the perfect blend of functionality, durability, and style, designed to meet the needs of the modern adventurer. Illuminate your journey, enhance your visibility, and drive with confidence, knowing your lighting setup is secure and strategically placed.\u003c\/p\u003e","brand":"HEISE LED Lighting Systems","offers":[{"title":"Default Title","offer_id":52023333814453,"sku":"QBP444633","price":84.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1214043_qbp444633.jpg?v=1763253522"},{"product_id":"qbp546019","title":"Navisafe - 3M VHB Self-Adhesive Mounting Pad - 3.5\", 2-Pack, f\/Suction Cup","description":"\u003ch4\u003eGeneral Description\u003c\/h4\u003e \u003cp\u003eEnhance the versatility of your suction cup mount with the Navisafe 3M VHB 3.5\"\" Self-Adhesive Mounting Pad 2-Pack. These self-adhesive pads provide a secure and reliable mounting solution for a wide range of marine accessories. With a diameter of 3.5 inches, they offer ample surface area for a strong bond. Made with 3M VHB technology, these pads ensure long-lasting durability and resistance to harsh marine conditions.\u003c\/p\u003e \u003ch4\u003eTechnical Specifications\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eProduct Type: Self-Adhesive Mounting Pad\u003c\/li\u003e \u003cli\u003eQuantity: 2-Pack\u003c\/li\u003e \u003cli\u003eMounting Method: Self-Adhesive\u003c\/li\u003e \u003cli\u003eDiameter: 3.5 inches\u003c\/li\u003e \u003cli\u003eMaterial: 3M VHB\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eHighlights\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eSecurely mount marine accessories\u003c\/li\u003e \u003cli\u003eSelf-adhesive pads for easy installation\u003c\/li\u003e \u003cli\u003e2-pack for added value\u003c\/li\u003e \u003cli\u003eLarge 3.5\"\" diameter for a strong bond\u003c\/li\u003e \u003cli\u003eConstructed with 3M VHB technology for durability\u003c\/li\u003e \u003c\/ul\u003e","brand":"Navisafe","offers":[{"title":"Default Title","offer_id":52023354785973,"sku":"QBP546019","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1214462_qbp546019.jpg?v=1763253712"},{"product_id":"qbp929641","title":"Sea-Dog - Remote Wireless Horn Button - Steering Wheel Hub Mount","description":"\u003ch4\u003eSeamless Sailing: Sea-Dog Remote Wireless Horn Button\u003c\/h4\u003e \u003cp\u003eIntroducing the \u003cstrong\u003eSea-Dog Remote Wireless Horn Button - Steering Wheel Hub Mount\u003c\/strong\u003e, a revolutionary addition to your marine navigation system. Designed for effortless operation, this horn button ensures that you can sound your horn with a simple push, enhancing safety and convenience on the water. The wireless design activates the existing horn through a transmitter button, which sends a signal to the receiver connected to the horn's wiring. Easy to install on your steering wheel's hub, it provides an accessible and reliable way to alert others, whether navigating through fog or signaling your arrival.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eWireless receiver connects easily to existing horn switch wiring\u003c\/li\u003e \u003cli\u003eOperational up to 50 ft away, offering flexibility and convenience\u003c\/li\u003e \u003cli\u003eUses a CR2032 battery (included) for long-lasting use\u003c\/li\u003e \u003cli\u003eCan be mounted with double-back tape or #8 fasteners (included), ensuring a secure fit\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eDurable Design for the High Seas\u003c\/h4\u003e \u003cp\u003eCrafted for durability and reliability, the Sea-Dog Remote Wireless Horn Button is built to withstand the marine environment. The transmitter and receiver are housed in robust casings that protect against moisture and salt, ensuring their longevity. With a maximum capacity of 20A and operating at 12VDC, it is compatible with a wide range of marine vessels. The compact dimensions of the horn button and transmitter allow for unobtrusive installation, maintaining the aesthetic of your helm while adding significant functionality.\u003c\/p\u003e \u003ch4\u003eTechnical Specifications\u003c\/h4\u003e \u003cp\u003eThe horn button's diameter of 2-15\/16 in. and depth of 7\/8 in., along with the transmitter's width of 2-1\/4 in. and length of 1-1\/4 in., make for a sleek and minimalistic addition to any steering wheel hub. This system's 12V, 20A capacity ensures compatibility with most marine horns, providing a versatile solution for boats of various sizes and types.\u003c\/p\u003e \u003ch4\u003eUpgrade Your Vessel for Safety and Convenience\u003c\/h4\u003e \u003cp\u003eEnhance your marine experience with the Sea-Dog Remote Wireless Horn Button. Its straightforward installation and operation make it an essential upgrade for boaters prioritizing safety without compromising on convenience. Whether you're navigating crowded marinas or open waters, this wireless horn button offers peace of mind with its reliable performance and easy access, ensuring you're heard when you need to be.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":52023393157301,"sku":"QBP929641","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1215341_qbp929641.jpg?v=1763254136"},{"product_id":"qbp220629","title":"Schmitt Marine - Faux Center Nut - Stainless Steel, 1\/2\" and 5\/8\", M12 Base Included","description":"\u003ch4\u003eElevate Your Helm Aesthetics with Schmitt Marine's Faux Center Nut\u003c\/h4\u003e \u003cp\u003eEnhance the visual appeal of your vessel's steering wheel with the \u003cstrong\u003eSchmitt Marine Faux Center Nut\u003c\/strong\u003e, meticulously crafted from stainless steel for both elegance and durability. This lightweight yet durable accessory is designed to provide a universal fit for cast steering wheels, including both 1\/2\" and 5\/8\" M12 base sizes. Its unique design not only adds a touch of sophistication to your helm but also ensures compatibility with a wide range of steering wheel models, making it an ideal upgrade for boaters seeking to refine their vessel's interior without compromising on quality.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConstructed from high-grade stainless steel for a blend of durability and sleek aesthetics.\u003c\/li\u003e \u003cli\u003eA lightweight design that maintains the robustness expected from standard stainless steel center nuts.\u003c\/li\u003e \u003cli\u003eUniversal fit facilitated by a unique design, compatible with both 1\/2\" and 5\/8\" M12 bases for cast steering wheels.\u003c\/li\u003e \u003cli\u003eEasy installation process allows for a quick and hassle-free upgrade, enhancing the overall look of your helm area.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eStainless Elegance, Universal Compatibility\u003c\/h4\u003e \u003cp\u003eThe Schmitt Marine Faux Center Nut is an embodiment of elegance and versatility. It offers boaters a simple yet effective way to upgrade their steering wheel's appearance, thanks to its universal design and easy installation. This faux center nut is not just an accessory; it's a statement of style and a testament to Schmitt Marine's commitment to quality and innovation.\u003c\/p\u003e \u003ch4\u003eA Touch of Sophistication for Every Helm\u003c\/h4\u003e \u003cp\u003eWith its sleek stainless steel construction and lightweight design, this faux center nut is the perfect addition to any helm, providing a refined look without adding unnecessary bulk. Its compatibility with a broad range of cast steering wheels ensures that no matter your vessel's make or model, you can enjoy the enhanced aesthetics and superior craftsmanship of Schmitt Marine's trusted accessories.\u003c\/p\u003e \u003c!-- If variations information were provided, it would be included here in a similar structured format --\u003e\u003c!-- Omitting sections that are not applicable or have 0 information as per instructions --\u003e \u003cp\u003eOpt for the Schmitt Marine Faux Center Nut and give your vessel's steering wheel a luxurious upgrade. Its blend of style, durability, and universal fit makes it an unparalleled choice for boaters looking to combine functionality with flair. Elevate your boating experience with this exquisite addition to your helm.\u003c\/p\u003e","brand":"Schmitt \u0026 Ongaro Marine","offers":[{"title":"Default Title","offer_id":52023413637301,"sku":"QBP220629","price":26.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1215924_qbp220629.jpg?v=1763254379"},{"product_id":"qbp572528","title":"Schmitt Marine - Faux Center Nut - Chrome\/Plastic, 1\/2\" \u0026 3\/4\" Base","description":"\u003ch4\u003eRevitalize Your Helm with Schmitt Marine's Chrome Faux Center Nut\u003c\/h4\u003e \u003cp\u003eUpgrade your vessel's aesthetic with the \u003cstrong\u003eSchmitt Marine Faux Center Nut\u003c\/strong\u003e, a brilliantly designed piece that combines the luxurious look of stainless steel with the cost-effectiveness and lightweight properties of chrome ABS plastic. Tailored for cast steering wheels, this faux center nut is available with both 1\/2\" and 3\/4\" bases, ensuring a perfect fit for a wide range of steering systems. It's an ideal choice for boat owners looking to enhance their helm's appearance without the added expense or weight of traditional metal components.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufactured from high-quality chrome ABS plastic for durability and a polished look.\u003c\/li\u003e \u003cli\u003eOffers the sophisticated appearance of stainless steel at a fraction of the cost.\u003c\/li\u003e \u003cli\u003eAvailable in both 1\/2\" and 3\/4\" base sizes for universal fitment on cast steering wheels.\u003c\/li\u003e \u003cli\u003eLightweight design ensures no additional strain on your steering system.\u003c\/li\u003e \u003cli\u003eEasy to install, providing an instant upgrade to your boat's aesthetic appeal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eA Touch of Elegance\u003c\/h4\u003e \u003cp\u003eThe Schmitt Marine Faux Center Nut is designed to bring a touch of elegance to your helm, offering the polished look of stainless steel without the weight or expense. Its chrome ABS plastic construction not only looks great but also stands up to the marine environment, ensuring lasting beauty and functionality.\u003c\/p\u003e \u003ch4\u003eUniversal Appeal, Effortless Installation\u003c\/h4\u003e \u003cp\u003eWith its versatile base sizes, this faux center nut caters to a broad spectrum of cast steering wheels, making it a universal solution for boaters seeking an aesthetic upgrade. The simplicity of installation means you can quickly and easily enhance the look of your helm, allowing you to return to the water in style with minimal downtime.\u003c\/p\u003e \u003c!-- If variations information were provided, it would be included here in a similar structured format --\u003e\u003c!-- Omitting sections that are not applicable or have 0 information as per instructions --\u003e \u003cp\u003eEmbrace the blend of style, functionality, and value with the Schmitt Marine Faux Center Nut. Whether you're aiming to refresh your vessel's appearance or replace a worn component, this faux center nut offers a cost-effective solution without compromising on quality or aesthetics. Enhance your steering wheel with Schmitt Marine and navigate in style.\u003c\/p\u003e","brand":"Schmitt \u0026 Ongaro Marine","offers":[{"title":"Default Title","offer_id":52023413670069,"sku":"QBP572528","price":4.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1215925_qbp572528.jpg?v=1763254380"},{"product_id":"qbp536501","title":"Schmitt Marine - Faux Center Nut - Black, 1\/2\" \u0026 5\/8\", M12 Base","description":"\u003ch4\u003eSleek Precision: Schmitt Marine's Faux Center Nut in Black\u003c\/h4\u003e \u003cp\u003eEnhance the aesthetic and functionality of your vessel's steering system with the \u003cstrong\u003eSchmitt Marine Faux Center Nut in Black\u003c\/strong\u003e. Designed as a replacement center cap for cast steering wheels, this faux center nut provides a seamless blend of style and utility. Compatible with 1\/2\" and 5\/8\" M12 bases, it offers versatile application across a wide range of cast steering wheels. This product is the perfect choice for boaters seeking to maintain or upgrade their helm's appearance with a sleek, black finish that complements any interior design.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eElegant black finish for a sleek and modern look.\u003c\/li\u003e \u003cli\u003eDesigned to fit both 1\/2\" and 5\/8\" M12 bases, ensuring compatibility with a wide array of cast steering wheels.\u003c\/li\u003e \u003cli\u003eProvides a durable and stylish replacement for the standard center cap.\u003c\/li\u003e \u003cli\u003eEasy to install, instantly enhancing the look of your steering wheel.\u003c\/li\u003e \u003cli\u003eMade with high-quality materials for long-lasting use and aesthetic appeal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eUpgrade Your Helm with Ease\u003c\/h4\u003e \u003cp\u003eThe Schmitt Marine Faux Center Nut is engineered for easy installation, allowing you to quickly upgrade your helm's look without extensive modifications. Its universal design ensures it fits a variety of steering wheel models, making it a versatile addition to any boat.\u003c\/p\u003e \u003ch4\u003eDesigned for Durability and Style\u003c\/h4\u003e \u003cp\u003eNot only does this faux center nut add a touch of elegance to your steering wheel, but it's also built to last. The high-quality construction ensures durability and resistance to the harsh marine environment, while its sleek black finish provides a fresh and modern update to your vessel's interior.\u003c\/p\u003e \u003c!-- If variations information were provided, it would be included here in a similar structured format --\u003e\u003c!-- Omitting sections that are not applicable or have 0 information as per instructions --\u003e \u003cp\u003eWith the Schmitt Marine Faux Center Nut in Black, you're not just upgrading the look of your helm; you're investing in a piece that marries functionality with sophisticated design. Perfect for boaters who appreciate the finer details, this faux center nut is an essential addition to any maritime journey.\u003c\/p\u003e","brand":"Schmitt \u0026 Ongaro Marine","offers":[{"title":"Default Title","offer_id":52023413768373,"sku":"QBP536501","price":31.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1215928_qbp536501.jpg?v=1763254383"},{"product_id":"qbp695256","title":"Schmitt Marine - Center Nut - For 7XX Series Steering Wheels","description":"\u003ch4\u003eEnhance Your Helm with Schmitt Marine's 12mm Center Nut for Uflex Helms\u003c\/h4\u003e \u003cp\u003eIntroducing the Schmitt Marine 12mm Center Nut, a precision-engineered accessory designed specifically for the 7XX Series Steering Wheels. Tailored for Uflex Helms, this center nut is crafted from high-grade stainless steel, ensuring unmatched durability and resistance to the corrosive marine environment. Its seamless integration with Uflex helms enhances your steering wheel's stability and aesthetic appeal, making it a must-have for any discerning boat owner.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConstructed from premium stainless steel for maximum longevity and corrosion resistance.\u003c\/li\u003e \u003cli\u003eCustom-fit for Uflex Helms, providing a secure and vibration-free connection.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eDurable Design for Uncompromised Performance\u003c\/h4\u003e \u003cp\u003eDelve into the robustness of the 12mm Center Nut, which stands as a testament to Schmitt Marine's commitment to quality. This stainless steel nut not only promises to withstand the harsh marine conditions but also ensures that your steering assembly remains firmly in place, offering you peace of mind during every voyage.\u003c\/p\u003e \u003ch4\u003eAdaptability for Every Captain\u003c\/h4\u003e \u003cp\u003eUnderstanding the diverse needs of mariners, Schmitt Marine offers this center nut in variants, ensuring compatibility with different steering wheel setups. Choose the perfect fit for your vessel:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003e758NUT\u003c\/strong\u003e - 5\/8\"\" size for broader compatibility across various steering wheel models.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003e702NUT\u003c\/strong\u003e - The original 12mm variant, precision-engineered for the 7XX Series Steering Wheels.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWith the Schmitt Marine 12mm Center Nut, elevate the functionality and aesthetic of your helm. This essential component is not just a fastening tool but a symbol of your commitment to quality and reliability on the waters. Choose Schmitt Marine for components that match the resilience and beauty of the sea.\u003c\/p\u003e","brand":"Schmitt \u0026 Ongaro Marine","offers":[{"title":"5\/8\"","offer_id":52023454171317,"sku":"QBP695256-V2","price":47.0,"currency_code":"USD","in_stock":true},{"title":"12mm","offer_id":52023454204085,"sku":"QBP695256-V5","price":47.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1217159_qbp695256.jpg?v=1763254867"},{"product_id":"qbp716715","title":"Sea-Dog - Leather Mooring Line Chafe Kit","description":"\u003ch4\u003eEnhance Durability with Sea-Dog's Leather Mooring Line Chafe Kit\u003c\/h4\u003e \u003cp\u003ePreserve the life of your mooring lines with the Sea-Dog Leather Mooring Line Chafe Kit. Designed for the discerning mariner, this kit offers an effective solution to prevent chafing, a common issue that can lead to the wear and tear of mooring lines. Each kit contains all the necessary components for a straightforward application, including waxed twine, a heavy-duty needle, and two 10-inch pieces of premium leather, pre-stamped for easy sewing. Ideal for 1\/2\" mooring lines, this kit combines functionality with aesthetic appeal, thanks to the natural leather's variable coloration.\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePrevents chafing and extends the life of mooring lines\u003c\/li\u003e \u003cli\u003eIncludes waxed twine and heavy-duty needle for easy application\u003c\/li\u003e \u003cli\u003eFeatures two 10\" pre-stamped pieces of premium leather for hassle-free sewing\u003c\/li\u003e \u003cli\u003eNatural leather enhances aesthetic appeal and durability\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eKit Components and Craftsmanship\u003c\/h4\u003e \u003cp\u003eEach component in the Sea-Dog Leather Mooring Line Chafe Kit is carefully selected for its quality and durability, ensuring that your mooring lines are protected in style.\u003c\/p\u003e \u003ch4\u003eProduct Specifications\u003c\/h4\u003e \u003cp\u003eDetailed specifications of the Sea-Dog Leather Mooring Line Chafe Kit ensure that you have all the information needed for proper usage:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMaterial: Natural leather for durability and aesthetic appeal\u003c\/li\u003e \u003cli\u003eKit Includes: Waxed twine, heavy-duty needle, and two 10\" leather pieces\u003c\/li\u003e \u003cli\u003eCompatible with 1\/2\" mooring lines\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eAvailable Variations for Different Line Sizes\u003c\/h4\u003e \u003cp\u003eThe Sea-Dog Leather Mooring Line Chafe Kit is available in multiple sizes to fit a range of mooring line diameters, ensuring a perfect match for your specific needs:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e561012-1 for 1\/2\" lines\u003c\/li\u003e \u003cli\u003e561016-1 for 5\/8\" lines\u003c\/li\u003e \u003cli\u003e561019-1 for 3\/4\" lines\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eChoose the right kit size to protect your mooring lines against chafing, enhancing their lifespan while maintaining their strength and appearance.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"1\/2\"","offer_id":52023455023285,"sku":"QBP716715-V4","price":22.95,"currency_code":"USD","in_stock":true},{"title":"5\/8\"","offer_id":52023455056053,"sku":"QBP716715-V6","price":23.45,"currency_code":"USD","in_stock":true},{"title":"3\/4\"","offer_id":52023455088821,"sku":"QBP716715-V3","price":26.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1217221_qbp716715.jpg?v=1763254879"},{"product_id":"qbp693109","title":"Schmitt Marine - Throttle Knob","description":"\u003ch4\u003eEnhance Your Helm with Schmitt Marine's Premium Throttle Knob\u003c\/h4\u003e \u003cp\u003eExperience precision and style at your fingertips with the Schmitt Marine 1-1\/2\" Throttle Knob, elegantly designed with red grooves. Crafted from the finest 316 cast stainless steel for unmatched durability and aesthetic appeal, this throttle knob is specifically tailored to fit Morse MY-3, MV-2, twin, and single controls with 3\/8\" -24 threads. Its distinctive red grooves are not only visually striking but also provide an intuitive feel for optimal control, meeting and exceeding ABYC specifications for marine safety and performance.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMade from 316 cast stainless steel for supreme durability and corrosion resistance.\u003c\/li\u003e \u003cli\u003eDesigned to fit Morse MY-3, MV-2, twin, and single controls with 3\/8\" -24 threads.\u003c\/li\u003e \u003cli\u003eColor-coded with red grooves for quick identification and enhanced grip.\u003c\/li\u003e \u003cli\u003eMeets ABYC specifications for safety and performance in marine environments.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Excellence for Unrivaled Control\u003c\/h4\u003e \u003cp\u003eThe Schmitt Marine Throttle Knob stands as a testament to meticulous engineering, combining form and function to offer seamless throttle control. Its ergonomic design ensures comfortable operation and precise throttle adjustment, making every journey on the water a pleasure.\u003c\/p\u003e \u003ch4\u003eVariants for Personalized Control\u003c\/h4\u003e \u003cp\u003eUnderstanding the unique needs of every mariner, Schmitt Marine offers this throttle knob in various sizes and colors:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003e50020\u003c\/strong\u003e - 1-1\/2\" with Red Grooves for a vibrant, tactile feedback.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003e50044\u003c\/strong\u003e - 1-7\/8\" with Red Grooves for those preferring a larger grip area.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003e50025\u003c\/strong\u003e - 1-1\/2\" with Gold Grooves for a luxurious touch.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003e50048\u003c\/strong\u003e - 1-7\/8\" with Gold Grooves, combining size and luxury.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eEach variant maintains the high-quality standards of Schmitt Marine, ensuring that your throttle control is not only a tool but a statement of sophistication. Upgrade your helm with the Schmitt Marine Throttle Knob and set a new standard in marine operation.\u003c\/p\u003e","brand":"Schmitt \u0026 Ongaro Marine","offers":[{"title":"1-1\/2\" \/ Red Grooves","offer_id":52023463280821,"sku":"QBP693109-V9","price":43.0,"currency_code":"USD","in_stock":true},{"title":"1-7\/8\" \/ Red Grooves","offer_id":52023463313589,"sku":"QBP693109-V0","price":49.2,"currency_code":"USD","in_stock":true},{"title":"1-1\/2\" \/ Gold Grooves","offer_id":52023463346357,"sku":"QBP693109-V3","price":45.55,"currency_code":"USD","in_stock":true},{"title":"1-7\/8\" \/ Gold Grooves","offer_id":52023463379125,"sku":"QBP693109-V6","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1217572_qbp693109.jpg?v=1763254982"},{"product_id":"qbp754162","title":"Weld Mount - Stainless Steel Stud - 1.25\" Base, 1\/4 x 20 Threads","description":"\u003ch4\u003eUltimate Strength with Weld Mount Stainless Steel Studs\u003c\/h4\u003e \u003cp\u003eIntroducing the Weld Mount Stainless Steel Stud, an essential component for secure and reliable mounting in marine environments. With a 1.25\" base, 1\/4 x 20 threads, and standing 2.25\" tall, this stud offers unparalleled support for a wide range of applications. Whether you're hanging panels, creating through-deck mounts, or tackling other demanding tasks, this stud ensures a solid installation with its impressive 500 lbs of tensile strength and 650 lbs in shear. Each stud mounts effortlessly to almost any surface with our high-strength acrylic adhesive, eliminating the need for drilling or welding and preserving the integrity of your surfaces. Sold in packs of 10, these studs are a structural solution designed to withstand the harshest marine conditions.\u003c\/p\u003e \u003ch4\u003eDistinguished Features for Robust Installations\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eHigh tensile strength of 500 lbs and shear strength of 650 lbs for demanding applications\u003c\/li\u003e \u003cli\u003e1\/4 x 20 threads for universal compatibility and ease of use\u003c\/li\u003e \u003cli\u003eAdhesive mountable, offering a drill-free, weld-free installation option\u003c\/li\u003e \u003cli\u003eMade from durable stainless steel, ideal for marine environments\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eSpecifications That Matter\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eMaterial: Premium stainless steel for maximum corrosion resistance\u003c\/li\u003e \u003cli\u003eBase Size: 1.25\" diameter providing a stable mounting surface\u003c\/li\u003e \u003cli\u003eThread: 1\/4 x 20, suitable for a wide range of applications\u003c\/li\u003e \u003cli\u003eHeight: 2.25\" tall, offering versatility in mounting depth\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eEffortless Installation, Unmatched Reliability\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eStreamline mounting processes in marine settings without compromising on strength\u003c\/li\u003e \u003cli\u003ePerfect for installing heavy-duty equipment, securing panels, and more\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eChoose Your Preferred Pack Size\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e142036 10 Pieces: Ideal for smaller projects or where precise quantities are needed\u003c\/li\u003e \u003cli\u003e142012100 100 Pieces: Best value for larger installations or commercial applications\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe Weld Mount Stainless Steel Stud is more than just a mounting solution; it's a testament to innovation, providing a secure, reliable bond in even the most demanding marine environments. Choose the pack size that fits your project requirements and experience the ease of installation and strength that Weld Mount studs offer. *Sold in specified quantities.\u003c\/p\u003e","brand":"Weld Mount","offers":[{"title":"10 Pieces","offer_id":52023466983605,"sku":"QBP754162-V8","price":56.99,"currency_code":"USD","in_stock":false},{"title":"100 Pieces","offer_id":52023467016373,"sku":"QBP754162-V7","price":273.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1217764_qbp754162.jpg?v=1763255019"},{"product_id":"qbp918789","title":"Weld Mount - Stainless Steel Heavy Stud - 2\" Base 3\/8\" x 16 Thread 2\" Tall, 25 Pack","description":"\u003ch4\u003eRevolutionize Your Marine Mounting with Weld Mount's Heavy Duty Stainless Steel Studs\u003c\/h4\u003e \u003cp\u003eIntroducing the ultimate solution for all heavy-load marine applications - the Weld Mount Stainless Steel Heavy Stud. Specifically designed to cater to the rigorous demands of mounting filters, panels, and other critical components on boats and yachts, this product is a testament to durability and strength. Each stud, measuring 2 inches in height and fitted to a robust 2\" base plate, is engineered through inertial (friction) welding, ensuring an unbreakable bond and exceptional load handling capabilities.\u003c\/p\u003e \u003ch4\u003eEngineered for Excellence\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eComposed of high-quality 304 stainless steel for unparalleled corrosion resistance and longevity.\u003c\/li\u003e \u003cli\u003eImpressive tensile strength of approximately 1,200 lbs, capable of withstanding heavy loads without compromise.\u003c\/li\u003e \u003cli\u003eShear strength of 1,500 lbs, offering additional security and peace of mind in extreme conditions.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Specifications: A Testament to Strength\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eThread Size: 3\/8\" x 16, ideal for a wide range of mounting tasks.\u003c\/li\u003e \u003cli\u003eStud Height: 2 inches, providing ample length for secure installations.\u003c\/li\u003e \u003cli\u003eBase Diameter: 2 inches, ensuring a stable and reliable mounting surface.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eUnparalleled Versatility and Use\u003c\/h4\u003e \u003cul\u003e \u003cli\u003ePerfect for securing heavy equipment such as filters and panels to your vessel.\u003c\/li\u003e \u003cli\u003eDesigned for both aesthetic appeal and functional efficiency in marine environments.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eInstallation Made Easy\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eSimple to install, requiring minimal tools and effort for a secure and reliable fit.\u003c\/li\u003e \u003cli\u003eFriction welding technique used in manufacturing guarantees a strong, durable bond.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWith Weld Mount's Stainless Steel Heavy Studs, you are investing in reliability, strength, and the peace of mind that comes with knowing your marine equipment is mounted securely. Designed for marine professionals and enthusiasts who demand the best, this product ensures that your vessel is equipped to handle whatever the sea throws its way.\u003c\/p\u003e","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":52023477633205,"sku":"QBP918789","price":299.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1218117_qbp918789.jpg?v=1763255126"},{"product_id":"qbp768924","title":"Weld Mount - Stainless Panel Stud - 8\" x 32\", 100 Pack","description":"\u003ch4\u003eWeld Mount Stainless Steel Panel Stud: Ultimate Strength for Marine Applications\u003c\/h4\u003e \u003cp\u003eIntroduce unparalleled strength and durability to your marine setups with the Weld Mount Stainless Steel Panel Stud. This premium .62\" base panel stud, featuring an 8 x 32 thread and standing 1.5\" tall, comes in a convenient 100 pack for extensive applications. Ideal for wire tie mounts, hose and cable clamps, studs, standoffs, and floating nutplates, these studs offer a robust solution for mounting needs across a variety of marine environments. Utilizing Weld Mount's distinctive non-sag acrylic adhesives, these fasteners ensure a permanent bond even on vertical or overhead surfaces, eliminating the need for drilling or welding.\u003c\/p\u003e \u003ch4\u003eUnwavering Support and Versatility\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eDesigned for a multitude of marine fastening applications, offering unmatched flexibility.\u003c\/li\u003e \u003cli\u003eManufactured from high-grade stainless steel for superior corrosion resistance and longevity.\u003c\/li\u003e \u003cli\u003eComes in a pack of 100, ensuring ample supply for large projects or multiple applications.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eAdvanced Installation Efficiency\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eMounts with unique non-sag acrylic adhesives, providing a strong bond without the need for traditional fastening methods.\u003c\/li\u003e \u003cli\u003eAllows for clean installations, preserving the integrity and aesthetics of the mounting surface.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Specifications\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eMaterial: High-quality stainless steel for exceptional durability.\u003c\/li\u003e \u003cli\u003eBase Diameter: .62 inches, offering a stable mounting platform.\u003c\/li\u003e \u003cli\u003eThread Size: 8 x 32, compatible with a wide range of attachments.\u003c\/li\u003e \u003cli\u003eHeight: 1.5 inches, providing ample length for secure installations.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eOptimized for Marine Durability\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eSpecifically designed to withstand harsh marine conditions, including saltwater and high humidity.\u003c\/li\u003e \u003cli\u003eCorrosion-resistant material ensures long-term performance and reliability.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eComprehensive Product Range for Every Need\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e83224100 1.5\": Perfect for applications requiring a longer reach and greater support.\u003c\/li\u003e \u003cli\u003e83220100 1.25\": Offers a slightly shorter option for versatile mounting scenarios.\u003c\/li\u003e \u003cli\u003e83216100 1\": The shortest option, ideal for compact spaces and minimal protrusion.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWith the Weld Mount Stainless Steel Panel Studs, marine installations are revolutionized, offering a blend of strength, ease of use, and aesthetic preservation. These studs are an indispensable tool for marine professionals and enthusiasts alike, seeking reliable, high-quality fastening solutions without the need for invasive installation techniques.\u003c\/p\u003e","brand":"Weld Mount","offers":[{"title":"1.5\"","offer_id":52023488315573,"sku":"QBP768924-V7","price":226.99,"currency_code":"USD","in_stock":false},{"title":"1.25\"","offer_id":52023488348341,"sku":"QBP768924-V3","price":191.99,"currency_code":"USD","in_stock":false},{"title":"1\"","offer_id":52023488381109,"sku":"QBP768924-V2","price":189.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1218517_qbp768924.jpg?v=1763255241"},{"product_id":"qbp769019","title":"Weld Mount - Stainless Panel Stud - 8\" x 32\"","description":"\u003ch4\u003eRevolutionize Marine Mounting with Weld Mount Stainless Panel Studs\u003c\/h4\u003e \u003cp\u003eIntroducing the .75\" Tall Stainless Panel Stud with a #8 x 32 Thread - the ultimate solution for secure, durable mounting in marine environments. Crafted for versatility, these studs are perfect for attaching wire clamps and other small components to composite surfaces. Originally designed for dash panel mounting, their application has broadened, catering to a myriad of securing needs aboard. With a 0.62\" diameter base and a .75\" tall stud, these stainless steel panel studs boast a tensile strength of 300 lbs and a shear strength of 375 lbs, ensuring robust performance under various conditions. Whether upgrading your vessel's console or organizing wiring, these studs provide a reliable, corrosion-resistant mounting option without the need for invasive installations.\u003c\/p\u003e \u003ch4\u003eDurable Design for Marine Environments\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eHigh tensile and shear strength for reliable mounting.\u003c\/li\u003e \u003cli\u003eStainless steel construction offers exceptional corrosion resistance.\u003c\/li\u003e \u003cli\u003eWide base plate for secure attachment on composite surfaces.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eEffortless Installation with Maximum Hold\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eDesigned for easy integration into marine settings.\u003c\/li\u003e \u003cli\u003eProvides a strong bond without the need for drilling or welding.\u003c\/li\u003e \u003cli\u003eMaximum torque load of 45 inch\/lbs for a steadfast fix.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Specifications\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eMaterial: Stainless steel for enhanced durability and corrosion resistance.\u003c\/li\u003e \u003cli\u003eBase Diameter: 0.62 inches, ensuring a stable and broad contact surface.\u003c\/li\u003e \u003cli\u003eThread: #8 x 32, compatible with a wide variety of attachments.\u003c\/li\u003e \u003cli\u003eHeight: 0.75 inches, optimal for various mounting depths.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eMarine Adaptability and Aesthetic\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eSleek design compliments the aesthetics of modern boats.\u003c\/li\u003e \u003cli\u003eIdeal for both functional and decorative applications.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eExplore the Range: Variants for Every Need\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e83212 0.75\": The standard option for most mounting needs.\u003c\/li\u003e \u003cli\u003e83216 1\": A slightly taller version for applications requiring extra depth.\u003c\/li\u003e \u003cli\u003e83220 1.25\": For when additional height is critical for installation.\u003c\/li\u003e \u003cli\u003e83224 1.5\": The tallest option, providing maximum versatility for mounting.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWeld Mount's Stainless Panel Studs redefine marine mounting solutions, offering strength, ease of use, and a sleek profile. These studs are not just hardware; they're an investment in the longevity and functionality of your marine equipment.\u003c\/p\u003e","brand":"Weld Mount","offers":[{"title":"0.75\"","offer_id":52023488413877,"sku":"QBP769019-V5","price":26.99,"currency_code":"USD","in_stock":true},{"title":"1\"","offer_id":52023488446645,"sku":"QBP769019-V6","price":30.99,"currency_code":"USD","in_stock":true},{"title":"1.25\"","offer_id":52023488479413,"sku":"QBP769019-V2","price":32.99,"currency_code":"USD","in_stock":true},{"title":"1.5\"","offer_id":52023488512181,"sku":"QBP769019-V3","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1218518_qbp769019.jpg?v=1763255241"},{"product_id":"qbp769420","title":"Weld Mount - Stainless Panel Stud - 10 Quantity","description":"\u003ch4\u003eRevolutionize Your Marine Mounting Solutions with Weld Mount's Stainless Studs\u003c\/h4\u003e \u003cp\u003eDiscover the unparalleled robustness and versatility of the Weld Mount 1.25\" Tall Stainless Stud with #10 x 24 Thread. Engineered for the marine environment, these studs offer a perfect blend of strength and ease of installation. Ideal for mounting wire clamps and securing critical components, these studs ensure that your marine equipment remains securely in place, regardless of the conditions. Utilizing a unique bonding process, these studs can be affixed from either side of the base plate, providing a permanent and reliable mount without the need for drilling or welding.\u003c\/p\u003e \u003ch4\u003eExceptional Features for Unmatched Performance\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eManufactured with a premium stainless steel for maximum corrosion resistance and longevity.\u003c\/li\u003e \u003cli\u003eDesigned with a #10 x 24 thread for a broad range of mounting applications.\u003c\/li\u003e \u003cli\u003eCan be bonded securely with acrylic adhesives, eliminating the need for drilling.\u003c\/li\u003e \u003cli\u003ePerfect for securing wire clamps, panels, and other marine equipment.\u003c\/li\u003e \u003cli\u003eProvides a strong, reliable mount with a sleek, low-profile design.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Specifications: Precision Engineered for Strength\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eThread Size: #10 x 24 for versatile application compatibility.\u003c\/li\u003e \u003cli\u003eStud Height: 1.25 inches, offering substantial thread engagement.\u003c\/li\u003e \u003cli\u003eBase Diameter: Utilizes the same base as the 1.4\" x 20 studs for consistency.\u003c\/li\u003e \u003cli\u003eMaterial: Stainless steel construction ensures durability and resistance to marine environments.\u003c\/li\u003e \u003cli\u003eInstallation: Can be bonded from either side of the base plate for flexible mounting options.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eMaximize Your Mounting Options: Versatile Variations\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1.25\" \/ 10 x 24 for standard applications.\u003c\/li\u003e \u003cli\u003e1.5\" \/ 10 x 24 for applications requiring additional thread engagement.\u003c\/li\u003e \u003cli\u003e2.25\" \/ 10 x 24 for extended length needs.\u003c\/li\u003e \u003cli\u003e1\" \/ 1\/4\" x 20 through 2\" \/ 1\/4\" x 20 for varying requirements and load capacities.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWhether you're outfitting a new vessel or upgrading an existing one, the Weld Mount Stainless Studs provide a secure, corrosion-resistant solution for all your marine mounting needs. Their superior design and versatile application make them an essential component for any serious marine enthusiast or professional. Invest in reliability and performance with Weld Mount's stainless studs, designed to withstand the rigors of the marine environment and keep your equipment securely mounted, wherever your voyage takes you.\u003c\/p\u003e","brand":"Weld Mount","offers":[{"title":"1.25\" \/ 10\" x 24\"","offer_id":52023488577717,"sku":"QBP769420-V5","price":32.99,"currency_code":"USD","in_stock":false},{"title":"1.5\" \/ 10\" x 24\"","offer_id":52023488610485,"sku":"QBP769420-V4","price":36.99,"currency_code":"USD","in_stock":true},{"title":"2.25\" \/ 10\" x 24\"","offer_id":52023488643253,"sku":"QBP769420-V0","price":49.99,"currency_code":"USD","in_stock":false},{"title":"1.5\" \/ 1\/4\" x 20\"","offer_id":52023488676021,"sku":"QBP769420-V8","price":40.99,"currency_code":"USD","in_stock":true},{"title":"1\" \/ 1\/4\" x 20\"","offer_id":52023488708789,"sku":"QBP769420-V2","price":35.99,"currency_code":"USD","in_stock":false},{"title":"1.75\" \/ 1\/4\" x 20\"","offer_id":52023488741557,"sku":"QBP769420-V00","price":49.99,"currency_code":"USD","in_stock":false},{"title":"2\" \/ 1\/4\" x 20\"","offer_id":52023488774325,"sku":"QBP769420-V65","price":56.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1218519_qbp769420.jpg?v=1763255242"},{"product_id":"qbp769541","title":"Weld Mount - Stainless Panel Stud - Qty. 5","description":"\u003ch4\u003eUnyielding Support with Weld Mount 2\" Stainless Studs\u003c\/h4\u003e \u003cp\u003eIntroducing the Weld Mount 2\" Tall Stainless Stud with 3\/8\" x 16 Threads, a cornerstone in marine and heavy-load applications. Crafted from 304 stainless steel for unmatched durability and strength, this stud stands as a beacon of reliability for securing filters, panels, and other critical components. Its friction-welded base plate exemplifies engineering excellence, ensuring a bond that withstands the rigors of both marine environments and industrial demands. Perfect for applications where strength, longevity, and corrosion resistance are non-negotiable.\u003c\/p\u003e \u003ch4\u003eKey Features for Maximum Efficiency\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eRobust 304 stainless steel construction for enduring performance.\u003c\/li\u003e \u003cli\u003eInertial welded base plate at 2\", optimized for superior tensile and shear strength.\u003c\/li\u003e \u003cli\u003e3\/8\" x 16 thread pattern, designed for versatile heavy-load applications.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Superiority Unveiled\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eTensile Strength: Approximately 1,200 lbs, ensuring reliable load management.\u003c\/li\u003e \u003cli\u003eShear Strength: Achieving 1,500 lbs for unparalleled stability.\u003c\/li\u003e \u003cli\u003eMaterial and Build: 304 stainless steel, inertia welded for maximum strength.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003ePrecision in Dimensions\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eStud Height: A substantial 2\" for comprehensive mounting solutions.\u003c\/li\u003e \u003cli\u003eThread Specification: 3\/8\" x 16, catering to a wide array of applications.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eSolid Foundations for Complex Installations\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eEngineered for demanding environments, ensuring longevity and resilience.\u003c\/li\u003e \u003cli\u003eIdeal for marine applications, offering excellent corrosion resistance.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eVariants Tailored to Your Specific Needs\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e3816325 2\": The quintessential choice for heavy-duty mounting.\u003c\/li\u003e \u003cli\u003e51618245 1.5\": A slightly shorter option with 5\/16\" x 18 threads for versatility.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWeld Mount's 2\" Tall Stainless Studs redefine the benchmarks for mounting solutions in marine and industrial settings. With its formidable strength and stainless steel integrity, it promises not just to meet but exceed the stringent demands of its applications.\u003c\/p\u003e","brand":"Weld Mount","offers":[{"title":"2\" \/ 3\/8\" x 16","offer_id":52023488807093,"sku":"QBP769541-V8","price":69.99,"currency_code":"USD","in_stock":false},{"title":"1.5\" \/ 5\/16\" x 18","offer_id":52023488839861,"sku":"QBP769541-V4","price":58.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1218520_qbp769541.jpg?v=1763255243"},{"product_id":"qbp769676","title":"Weld Mount - Stainless Panel Stud - 15 Quantity","description":"\u003ch4\u003eRevolutionize Your Mounting Solutions with Weld Mount Stainless Steel Studs\u003c\/h4\u003e \u003cp\u003eIntroducing the groundbreaking Stainless Steel Stud 1.25\" Base with 10 x 24 Threads, standing at 0.50\" tall. This product package, coming in a set of 15, represents the pinnacle of mounting technology. Specifically designed for marine and other demanding environments, these studs provide a robust solution for attaching wire clamps and securing various components with precision and durability. Their innovative design allows for versatile bonding from either side of the base plate, offering unparalleled installation flexibility.\u003c\/p\u003e \u003ch4\u003eKey Features Designed for Optimal Performance\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eManufactured with high-quality stainless steel for superior corrosion resistance.\u003c\/li\u003e \u003cli\u003eCompact 0.50\" height with a 1.25\" base for secure installations in limited spaces.\u003c\/li\u003e \u003cli\u003e10 x 24 threads allow for versatile applications and secure fastening.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eUnmatched Technical Specifications\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eMaterial: Premium stainless steel, ensuring longevity and resilience.\u003c\/li\u003e \u003cli\u003eBase Diameter: 1.25\" for stable and robust mounting.\u003c\/li\u003e \u003cli\u003eThread Specification: 10 x 24, offering compatibility with a wide range of accessories.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eCompact Design, Mighty Strength\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eHeight: A practical 0.50\" tall stud, designed for effective space utilization.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eSeamless Integration for Marine Excellence\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eEngineered to withstand harsh marine conditions without compromising performance.\u003c\/li\u003e \u003cli\u003eEasy to integrate into existing setups, enhancing utility without the need for extensive modifications.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eVersatility Meets Durability\u003c\/h4\u003e \u003cul\u003e \u003cli\u003ePerfect for mounting wire clamps and other small-diameter necessities.\u003c\/li\u003e \u003cli\u003eAdaptable for use in both marine and industrial applications, offering a wide range of usage scenarios.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eChoose Your Perfect Fit\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e102408 0.5\": Ideal for tight-space applications requiring compact, strong fastening solutions.\u003c\/li\u003e \u003cli\u003e102416 1\": For those requiring a bit more leverage and height in their mounting solutions.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWeld Mount's Stainless Steel Studs redefine the standard for secure, durable mounting solutions. With a focus on strength, versatility, and corrosion resistance, these studs are an indispensable asset for any marine or industrial project.\u003c\/p\u003e","brand":"Weld Mount","offers":[{"title":"0.5\"","offer_id":52023488872629,"sku":"QBP769676-V1","price":30.99,"currency_code":"USD","in_stock":false},{"title":"1\"","offer_id":52023488905397,"sku":"QBP769676-V0","price":33.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1218521_qbp769676.jpg?v=1763255244"},{"product_id":"qbp769708","title":"Weld Mount - Stainless Panel Stud - Qty. 10","description":"\u003ch4\u003eEnhance Your Marine Mounting Solutions with Weld Mount 2.5\" Tall Stainless Studs\u003c\/h4\u003e \u003cp\u003eDiscover the ultimate solution for your marine mounting needs with the Weld Mount 2.5\" Tall Stainless Stud, featuring a robust 1\/4\" x 20 Thread. Engineered to provide a secure, durable, and versatile mounting option, these studs are perfect for a wide range of applications. With the ability to mount to virtually any surface using AT-4010 Acrylic Adhesive, this product offers both incredible strength and flexibility, making it ideal for hanging panels, through-deck mounts, and numerous other marine applications.\u003c\/p\u003e \u003ch4\u003eUnmatched Performance and Durability\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eHigh tensile strength of 500 lbs. ensures reliable performance under load.\u003c\/li\u003e \u003cli\u003eShear strength of 650 lbs. provides extra security and peace of mind.\u003c\/li\u003e \u003cli\u003eAll studs are equipped with 1\/4\" x 20 threads for universal compatibility.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Excellence for Marine Environments\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eMaterial: Premium-grade stainless steel for maximum corrosion resistance.\u003c\/li\u003e \u003cli\u003eThread Size: 1\/4\" x 20 for versatile and secure mounting.\u003c\/li\u003e \u003cli\u003eHeight: A generous 2.5\" for flexible installation options.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eDesigned for Ease of Installation\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eEasy to mount on virtually any surface with AT-4010 Acrylic Adhesive.\u003c\/li\u003e \u003cli\u003eIdeal for quick and hassle-free mounting without the need for drilling or welding.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eApplications as Boundless as the Sea\u003c\/h4\u003e \u003cul\u003e \u003cli\u003ePerfect for hanging panels, securing through-deck mounts, and more.\u003c\/li\u003e \u003cli\u003eSuitable for use on boats, yachts, and other marine vessels.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eVariations to Suit Every Need\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e142040 1\/4\" x 20: The standard option for a wide range of uses.\u003c\/li\u003e \u003cli\u003e102440 10 x 24: Offers an alternative thread size for specific requirements.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eChoose Weld Mount's 2.5\" Tall Stainless Studs for a reliable, strong, and versatile solution to all your marine mounting challenges. Designed with the needs of marine enthusiasts in mind, these studs stand up to the harshest environments while providing the flexibility and strength needed for various applications.\u003c\/p\u003e","brand":"Weld Mount","offers":[{"title":"1\/4\" x 20","offer_id":52023488938165,"sku":"QBP769708-V5","price":60.99,"currency_code":"USD","in_stock":false},{"title":"10 x 24","offer_id":52023488970933,"sku":"QBP769708-V4","price":59.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1218522_qbp769708.jpg?v=1763255245"},{"product_id":"qbp989882","title":"BoatBuckle - Universal Mounting Bracket Kit","description":"\u003ch4\u003eEffortless Adaptability for Any Trailer\u003c\/h4\u003e\u003cp\u003eIntroducing the BoatBuckle Universal Mounting Bracket Kit, the perfect solution for securing your boat with ease and flexibility. This innovative bracket kit features a unique, three-sided design that adapts to a wide range of trailer tie-down tab configurations. Whether you need to reposition your BoatBuckle G2 for better access or adapt it to a different trailer, this universal mounting bracket ensures a secure and convenient setup.\u003c\/p\u003e\u003ch4\u003eUnmatched Flexibility and Security\u003c\/h4\u003e\u003cp\u003eThe BoatBuckle Universal Mounting Bracket Kit is engineered to provide unparalleled versatility. Its three-sided bracket design allows for multiple mounting options, accommodating the diverse tie-down tab designs found on most trailers. This adaptability ensures that your BoatBuckle G2 can be easily moved and secured in various positions, offering optimal convenience and security.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Sided Design\u003c\/strong\u003e: Provides multiple mounting angles for versatile installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Fit\u003c\/strong\u003e: Compatible with the majority of trailer tie-down tab designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Flexibility\u003c\/strong\u003e: Allows the BoatBuckle G2 to be repositioned as needed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eKey Features and Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Installation\u003c\/strong\u003e: The unique three-sided design accommodates various trailer configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility\u003c\/strong\u003e: Fits most trailer tie-down tabs, making it a versatile choice for any trailer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure Mounting\u003c\/strong\u003e: Ensures your BoatBuckle G2 is securely positioned for optimal performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Adjustment\u003c\/strong\u003e: Allows for quick and easy repositioning of your tie-downs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cp\u003eThe BoatBuckle Universal Mounting Bracket Kit is crafted from high-quality materials to provide reliable performance and long-lasting durability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-strength steel for durability and resistance to corrosion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign\u003c\/strong\u003e: Three-sided bracket for multiple mounting options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e: Fits the majority of trailer tie-down tab designs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompact and Durable Design\u003c\/h4\u003e\u003cp\u003eDesigned for both strength and flexibility, the BoatBuckle Universal Mounting Bracket Kit seamlessly integrates with your trailer setup, providing reliable performance without adding bulk.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: Compact design for easy integration and versatility.\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eReliable and Robust Finish\u003c\/h4\u003e\u003cp\u003eThe high-strength steel construction ensures the bracket kit can withstand the harsh marine environment, providing long-lasting durability and reliability.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Corrosion-resistant for extended use in marine conditions.\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eSimple Installation and Use\u003c\/h4\u003e\u003cp\u003eInstalling and using the BoatBuckle Universal Mounting Bracket Kit is straightforward, making it an essential addition to your boat trailer for hassle-free operation and maximum security.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Steps\u003c\/strong\u003e:\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eSelect the desired mounting position on your trailer.\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eAttach the bracket using the appropriate hardware.\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eSecure your BoatBuckle G2 to the bracket, adjusting as needed for optimal positioning.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eEnsure Secure and Flexible Boat Transport\u003c\/h4\u003e\u003cp\u003eThe BoatBuckle Universal Mounting Bracket Kit is the perfect solution for any marine enthusiast looking to secure their boat with confidence and flexibility. With its unique three-sided design, high-strength construction, and easy installation, this bracket kit offers the ultimate in versatility and reliability for all your marine adventures. Trust BoatBuckle to keep your boat secure and your transport hassle-free.\u003c\/p\u003e","brand":"BoatBuckle","offers":[{"title":"Default Title","offer_id":52023529439413,"sku":"QBP989882","price":13.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1219831_qbp989882.jpg?v=1763255726"},{"product_id":"qbp708060","title":"Furuno - S-Type Side Fastening Flush Mount Kit","description":"\u003ch4\u003eEnhance Your Navigation Setup: Furuno S-Type Side Fastening Flush Mount Kit\u003c\/h4\u003e \u003cp\u003eIntroducing the Furuno S-Type Side Fastening Flush Mount Kit, a sleek and sturdy solution designed to seamlessly integrate your essential marine electronics into the helm or dashboard of your vessel. Crafted with precision and durability, this kit ensures your Furuno GP32, RD30, and NX300 devices are mounted securely and with an aesthetic appeal that complements your boat's interior.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned specifically for compatibility with Furuno GP32, RD30, and NX300, offering a tailored fit and finish.\u003c\/li\u003e \u003cli\u003eIncludes two robust brackets and necessary screws for a comprehensive mounting solution.\u003c\/li\u003e \u003cli\u003eEnsures a sleek, flush mount installation, enhancing the overall look and functionality of your navigation station.\u003c\/li\u003e \u003cli\u003eMade from high-quality materials for durability and longevity in marine environments.\u003c\/li\u003e \u003cli\u003eSimple and straightforward installation process allows you to quickly and easily upgrade your setup.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Elegance on Deck\u003c\/h4\u003e \u003cp\u003eEmbrace the sophistication and functionality of Furuno's mounting solution:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSeamless integration with your vessel's design, maintaining a clean and organized dashboard.\u003c\/li\u003e \u003cli\u003eDurable construction ensures your marine electronics remain securely in place, even in rough conditions.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eDimensions \u0026amp; Installation Precision\u003c\/h4\u003e \u003cp\u003eDesigned for a perfect fit, this mount kit caters to your specific Furuno models, ensuring a streamlined and professional installation:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCustom-engineered for Furuno GP32, RD30, and NX300 units, guaranteeing an exact fit.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe Furuno S-Type Side Fastening Flush Mount Kit is your go-to solution for a refined and secure mounting of your cherished marine devices. With everything you need included, this kit simplifies the process of integrating advanced navigation technology into your vessel, ensuring you're ready to set sail with confidence and style.\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023556407477,"sku":"QBP708060","price":49.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1219991_qbp708060.jpg?v=1763255795"},{"product_id":"qbp410094","title":"Furuno - Pipe Mount Kit - for GP33","description":"\u003ch4\u003eSeamless Integration: Furuno Pipe Mount Kit for GP33\u003c\/h4\u003e \u003cp\u003eUnlock the full potential of your Furuno GP33 with the bespoke Pipe Mount Kit, designed to ensure a secure and elevated mounting solution for enhanced navigational efficacy. This specialized kit is engineered for the precise dimensions of the GP33, offering a flawless fit and optimal positioning for your device.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCustom-designed exclusively for the Furuno GP33 model, guaranteeing a perfect match and seamless integration.\u003c\/li\u003e \u003cli\u003eEnsures a sturdy and reliable mount for your device, ideal for all marine environments.\u003c\/li\u003e \u003cli\u003eEasy installation process allows for a quick and hassle-free setup.\u003c\/li\u003e \u003cli\u003eDurable construction materials withstand harsh marine conditions, ensuring longevity and reliability.\u003c\/li\u003e \u003cli\u003eOffers a neat and tidy mounting solution, keeping your navigation area uncluttered and efficient.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eDurable Design for Marine Adventures\u003c\/h4\u003e \u003cp\u003eExperience peace of mind knowing your Furuno GP33 is securely mounted with materials designed to endure the rigors of marine life:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eRobust construction materials provide a solid foundation, minimizing vibrations and ensuring stability.\u003c\/li\u003e \u003cli\u003eThe kit includes all necessary mounting hardware for a complete installation solution.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eEffortless Installation, Endless Exploration\u003c\/h4\u003e \u003cp\u003eWith the Furuno Pipe Mount Kit for GP33, installing your navigational equipment has never been easier, allowing you to focus on the journey ahead:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for quick and straightforward installation, ensuring your device is up and running in no time.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe Furuno Pipe Mount Kit for the GP33 is an essential accessory for mariners seeking a robust, reliable, and aesthetically pleasing mounting solution. It ensures your navigational system is perfectly positioned for optimal performance, allowing you to navigate the waters with confidence and precision.\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023556604085,"sku":"QBP410094","price":53.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1219993_qbp410094.jpg?v=1763255796"},{"product_id":"qbp598090","title":"Attwood Marine HubMate Wheel Bearing Protectors, 1.78 in Hub ID, Grease Fitting, PVC Covers","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 11108-7 is a HubMate wheel bearing protector for compatible trailer wheel hubs that replaces the standard dust cap and gives you an accessible grease fitting for routine service. It fits hubs with a 1.78 inch inner diameter and keeps positive grease pressure in the hub to help hold water and dirt back.\u003c\/p\u003e\u003cp\u003eFor boat trailers that are launched often, this matters at the ramp and on the road. You can add grease from the outside without taking the hub apart, which makes regular bearing care simpler between full inspections. The fitted PVC cover adds protection over the exposed end of the protector.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplaces the standard dust cap in compatible trailer wheel hubs\u003c\/li\u003e\n\u003cli\u003eGrease fitting lets you add grease without hub disassembly\u003c\/li\u003e\n\u003cli\u003ePositive grease pressure helps keep water and dirt out during launch and retrieval cycles\u003c\/li\u003e\n\u003cli\u003eFits wheel hubs with a 1.78 inch inner diameter\u003c\/li\u003e\n\u003cli\u003eCustom-fitted PVC covers protect the exposed end of the protector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit comes down to the hub opening. This model is sized for wheel hubs with a 1.78 inch inner diameter, so that measurement should match the trailer hub before ordering. It is made for hubs that use a dust cap style setup and need an external grease point for easier service.\u003c\/p\u003e\u003cp\u003eThis product is a better match for boat trailers than for the vessel itself, especially when the trailer sees repeated ramp use. It suits owners who want a cleaner way to maintain bearing lubrication without opening the hub each time grease needs to be added.\u003c\/p\u003e\u003ch6\u003eMaintenance and use\u003c\/h6\u003e\u003cp\u003eRoutine greasing is simpler with the fitting positioned at the hub end, and that can help keep bearings lubricated between full bearing and seal service. It does not replace periodic inspection of bearings, seals, and grease condition, but it does make normal trailer hub maintenance easier to stay on top of.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":52023568138421,"sku":"QBP598090","price":21.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329237_qbp598090.jpg?v=1780191893"},{"product_id":"qbp840280","title":"Humminbird - H7R Mounting Kit","description":"\u003ch4\u003eAchieve a Professional Look with Ease\u003c\/h4\u003e\u003cp\u003eThe Humminbird IDMK H7R In-Dash Mounting Kit is designed to provide a secure and sleek in-dash installation for your HELIX 7 fish finders. This rigid and reinforced mounting kit includes all necessary brackets and hardware, ensuring a professional and finished look for your marine setup. Whether you're out on the water for leisure or professional fishing, this kit ensures that your HELIX 7 fish finder is securely and neatly mounted.\u003c\/p\u003e\u003ch4\u003eKey Benefits and Uses\u003c\/h4\u003e\u003cp\u003eEngineered for durability and ease of installation, the IDMK H7R mounting kit is perfect for anyone looking to enhance their marine electronics setup with a clean, in-dash appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility:\u003c\/strong\u003e Works with all HELIX 7 models, excluding HELIX 7 G4N.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Installation Kit:\u003c\/strong\u003e Includes all necessary brackets and hardware for a secure mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Design:\u003c\/strong\u003e Constructed with reinforced materials to withstand marine environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStreamlined Technical Specifications\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All HELIX 7 models (excluding HELIX 7 G4N)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003ePrecision Dimensions for Perfect Fit\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eOptimized Fit:\u003c\/strong\u003e Designed to seamlessly integrate into your boat's dashboard, providing a neat and professional installation.\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eSleek Finishes for Your Marine Setup\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAvailable Finishes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eReinforced Design:\u003c\/strong\u003e Rigid and durable to ensure longevity and stability in marine conditions.\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eCustomization with Product Variations\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eVariations List:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Helix 7 \/ Model In-Dash:\u003c\/strong\u003e Perfect for standard HELIX 7 models, ensuring a secure fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Helix 7 G4 \/ Model In-Dash:\u003c\/strong\u003e Tailored for HELIX 7 G4 models, providing a precise and stable installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Helix 7 G4 Models \/ Model Cover:\u003c\/strong\u003e Offers additional protection for HELIX 7 G4 models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Helix 7 G4N Models \/ Model Gimbal Mount:\u003c\/strong\u003e Specifically designed for HELIX 7 G4N models, featuring a gimbal mount for versatile viewing angles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eHighlights of the Humminbird IDMK H7R\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy Choose the IDMK H7R:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional Installation:\u003c\/strong\u003e Achieve a clean and integrated look for your HELIX 7 fish finder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Durability:\u003c\/strong\u003e Built to withstand the harsh marine environment, ensuring long-term reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase of Use:\u003c\/strong\u003e Simple installation process with all necessary components included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrade your marine electronics setup with the Humminbird IDMK H7R In-Dash Mounting Kit for Helix 7. Designed for ease of installation and a professional finish, this mounting kit ensures that your HELIX 7 fish finder is securely and neatly integrated into your boat's dashboard. Enjoy peace of mind with Humminbird’s quality and reliability, and make the most of your time on the water with a setup that looks as good as it performs.\u003c\/p\u003e","brand":"Humminbird","offers":[{"title":"Helix 7 \/ In-Dash","offer_id":52023621779637,"sku":"QBP840280-3","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Helix 7 G4 \/ In-Dash","offer_id":52023621812405,"sku":"QBP840280-1","price":64.99,"currency_code":"USD","in_stock":true},{"title":"Helix 7 G4 Models \/ Cover","offer_id":52023621845173,"sku":"QBP840280-0","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Helix 7 G4N Models \/ Gimbal Mount","offer_id":52023621877941,"sku":"QBP840280-9","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1222178_qbp840280.jpg?v=1763256635"},{"product_id":"qbp650964","title":"Lewmar Pro-Fish Retaining Pin Kit 66000619","description":"\u003cp\u003e\u003cstrong\u003ePro-Fish Retaining Pin Kit \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReplacement retaining pin kit for Pro-Fish windlasses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePro-Fish windlass\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e*Sold as an Individual\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":52023920394421,"sku":"QBP650964","price":12.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1233268_qbp650964.jpg?v=1763260706"},{"product_id":"qbp214711","title":"Lewmar V1\/V2\/V3 Mounting Kit (Metric) 66000631","description":"\u003cp\u003e\u003cstrong\u003eV1\/V2\/V3 Mounting Kit (Metric) \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMounting Kit (Metric) for V1 to V3 Windlass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eV1, V2 and V3 windlasses\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e*Sold as an Individual \u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":52023920427189,"sku":"QBP214711","price":45.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1233271_qbp214711.jpg?v=1763260707"},{"product_id":"qbp815461","title":"Lewmar Pro-Series Stripper Kit 66000096","description":"\u003cp\u003e\u003cstrong\u003ePro-Series Stripper Kit \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReplacement stripper and fasteners for Pro-Series windlasses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible with: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePro-Series and Pro-Fish windlasses\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e*Sold as an Indivudual\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":52023921017013,"sku":"QBP815461","price":35.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1233330_qbp815461.jpg?v=1763260725"},{"product_id":"qbp867425","title":"Draw-Tite Adjustable Tri-Ball Mount 63070","description":"\u003cp\u003e\u003cstrong\u003eAdjustable Tri-Ball Mount\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAdjustable Tri-Ball Ball Mount System w\/Step, 2\" Sq. Shank, 1-7\/8\" Ball 2,000 lbs (GTW), 2\" Ball 10,000 lbs. (GTW), 2-5\/16\" Ball 14,000 lbs. (GTW)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAdjustable height - Perfect for towing multiple trailers of varying heights and couplers\u003c\/li\u003e \u003cli\u003eHeight adjusts up to 10.5\"\u003c\/li\u003e \u003cli\u003eRated to 14k GTW\u003c\/li\u003e \u003cli\u003e1-7\/8\" (2K rating) , 2\" (10K GTW), and 2-5\/16\" (14K GTW) Hitch balls\u003c\/li\u003e \u003cli\u003eFits 2\" receivers and rated up to 14K GTW\u003c\/li\u003e \u003cli\u003eCast shank, variable height capability\u003c\/li\u003e \u003cli\u003eIntegrated hitch step with grip pattern\u003c\/li\u003e \u003cli\u003eKnurled bolt pins with secure lanyard\u003c\/li\u003e \u003cli\u003eBlack powder coat finish\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Draw-Tite","offers":[{"title":"Default Title","offer_id":52023927996597,"sku":"QBP867425","price":503.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1233716_qbp867425.jpg?v=1763260929"},{"product_id":"qbp243277","title":"Draw-Tite Adjustable Dual Ball Mount 63071","description":"\u003cp\u003e\u003cstrong\u003eAdjustable Dual Ball Mount\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAdjustable Dual Ball Mount System, 2\" Sq. Shank, 2\" Ball 10,000 lbs. (GTW), 2-5\/16\" Ball 14,000 lbs. (GTW)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAdjustable height - Perfect for towing multiple trailers of varying heights and couplers\u003c\/li\u003e \u003cli\u003eHeight adjusts up to 10.5\"\u003c\/li\u003e \u003cli\u003e2\" (10K GTW) and 2-5\/16\" (14K GTW) Hitch balls\u003c\/li\u003e \u003cli\u003eFits 2\" receivers and rated up to 14K GTW\u003c\/li\u003e \u003cli\u003eCast shank, variable height capability\u003c\/li\u003e \u003cli\u003eKnurled bolt pins with secure lanyard\u003c\/li\u003e \u003cli\u003eBlack powder coat finish\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Draw-Tite","offers":[{"title":"Default Title","offer_id":52023928062133,"sku":"QBP243277","price":465.93,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1233717_qbp243277.jpg?v=1763260930"},{"product_id":"qbp923974","title":"Fireboy-Xintex Conversion Plate f\/CO Detectors - Black 100102-B","description":"\u003cp\u003e\u003cstrong\u003eConversion Plate for CO Detectors - Black\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOptional conversion plate for mounting CMD6-M Carbon Monoxide Alarms in places where larger CMD2-M, CMD3-M, CMD4-M or CMD5-M units were previously installed. This cover plate covers up unsightly wear or openings from previous installations.\u003c\/p\u003e \u003cp\u003eMounting hardware included.\u003c\/p\u003e \u003cp\u003e*Sold as an Individual\u003c\/p\u003e","brand":"Fireboy-Xintex","offers":[{"title":"Default Title","offer_id":52023936352437,"sku":"QBP923974","price":15.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1234333_qbp923974.jpg?v=1763261119"},{"product_id":"qbp815285","title":"Fireboy-Xintex Conversion Plate f\/CO Detectors - White 100102-W","description":"\u003cp\u003e\u003cstrong\u003eConversion Plate for CO Detectors - White\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eOptional conversion plate for mounting CMD6-M Carbon Monoxide Alarms in places where larger CMD2-M, CMD3-M, CMD4-M or CMD5-M units were previously installed. This cover plate covers up unsightly wear or openings from previous installations.\u003c\/p\u003e \u003cp\u003eMounting hardware included.\u003c\/p\u003e \u003cp\u003e*Sold as an Individual\u003c\/p\u003e","brand":"Fireboy-Xintex","offers":[{"title":"Default Title","offer_id":52023936385205,"sku":"QBP815285","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1234334_qbp815285.jpg?v=1763261120"},{"product_id":"qbp939213","title":"C.E. Smith Pontoon Bolster Bracket - 15-3\/4\" x 2\" 10052-32GA","description":"\u003cp\u003e\u003cstrong\u003ePontoon Bolster Bracket - 15-3\/4\" x 2\"\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePontoon bolster brackets support bunkboards in a shallow V cradle configuration that best suits pontoon hulls. Best when installed with 2x6, 2x8, or 2x10 carpeted bunk boards laid flat. A bracket should be installed at each frame cross member for maximum support and load capacity.\u003c\/p\u003e","brand":"C.E. Smith","offers":[{"title":"Default Title","offer_id":52023953916085,"sku":"QBP939213","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1235555_qbp939213.jpg?v=1763261567"},{"product_id":"qbp534227","title":"Lewmar Large Handle Kit - Pair 361680990","description":"\u003cp\u003e\u003cstrong\u003eLarge Handle Kit - Pair\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eReplacement handle kit with both Left and Right-sided handles.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFlush 3G hatch sizes 27, 30, 44, 60, 70, Bavaria big rectangle and Bavaria big square\u003c\/li\u003e \u003cli\u003eCoastline hatch, sizes 18, 22, 30, 40, 44, 50, 54, 60, 65 and 70\u003c\/li\u003e \u003cli\u003eOcean hatch, sizes 30, 40, 44, 50, 54, 60, 65, 66 (H.Rassy), 70, 75 and 77\u003c\/li\u003e \u003cli\u003eTrimline hatch sizes 30, 40, 50, 60 and 70\u003c\/li\u003e \u003cli\u003eRolltop hatch, sizes 30, 40, 50, 60, 65 and 70\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eOne (1) Exterior Handle LH Grey Assembly\u003c\/li\u003e \u003cli\u003eOne (1) Exterior Handle RH Grey Assembly\u003c\/li\u003e \u003cli\u003eTwo (2) O-Ring\u003c\/li\u003e \u003cli\u003eTwo (2) Exterior Handle - Grey\u003c\/li\u003e \u003cli\u003eTwo (2) Base Bush - Grey\u003c\/li\u003e \u003cli\u003eTwo (2) Base Bush O-ring\u003c\/li\u003e \u003cli\u003eTwo (2) Handle packing washers\u003c\/li\u003e \u003cli\u003eOne (1) Handle + Lock RH - Grey\u003c\/li\u003e \u003cli\u003eOne (1) Handle + Lock LH - Grey\u003c\/li\u003e \u003cli\u003eTwo (2) No. 10 Screw\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e*Sold as an Individual\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":52023965319349,"sku":"QBP534227","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1236165_qbp534227.jpg?v=1763261835"},{"product_id":"qbp920244","title":"C.E. Smith Side Angle \"L\" Bracket - Pair - Galvanized 10211G","description":"\u003cp\u003e\u003cstrong\u003eSide Angle \"L\" Bracket - Pair - Galvanized\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e7 ga, 1\/2” shaft hole, 3\/8” mounting hole. Sold in pairs.\u003c\/p\u003e","brand":"C.E. Smith","offers":[{"title":"Default Title","offer_id":52023980687541,"sku":"QBP920244","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1237398_qbp920244.jpg?v=1763262211"},{"product_id":"qbp862311","title":"Maretron Spare Paddle Wheel Kit 33-398-04PW","description":"\u003cb\u003eSpare Paddle Wheel Kit\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eMaretron spare paddle wheel kit\u003cbr\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":52023981277365,"sku":"QBP862311","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1237478_qbp862311.jpg?v=1763262224"},{"product_id":"qbp214813","title":"C.E. Smith Pontoon Wing Bracket 26244GA","description":"\u003cb\u003ePontoon Wing Bracket\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePontoon bolster brackets support bunk boards in a shallow V cradle configuration that best suits pontoon hulls. This V-wing bracket is designed with a 7\" lateral adjustment slot for perfect pontoon to trailer alignment.\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e1\/8\" thick steel\u003c\/li\u003e\n\u003cli\u003eHot dip galvanized for durability\u003c\/li\u003e\n\u003cli\u003eBest when installed with 2x6, 2x8, or 2x10 carpeted bunk boards laid flat\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003eA bracket should be installed at each frame cross member for maximum support and load capacity.","brand":"C.E. Smith","offers":[{"title":"Default Title","offer_id":52023986356405,"sku":"QBP214813","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1238130_qbp214813.jpg?v=1763262369"},{"product_id":"qbp963333","title":"C.E. Smith Stake Pocket 45004G40","description":"\u003cb\u003eStake Pocket\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe easiest and most secure way to add removeable sides to a trailer. Sized to receive standard 2\" x 4\" studs.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eBolts onto trailer\u003c\/li\u003e\n\u003cli\u003e11 gauge\u003c\/li\u003e\n\u003cli\u003eHot dipped galvanized\u003c\/li\u003e\n\u003cli\u003e3\/8\" holes for bolting to frame\u003c\/li\u003e\n\u003cli\u003eCenter hole for an optional locking bolt\u003c\/li\u003e\n\u003cli\u003eDimensions: 2-1\/2\" x 1-1\/2\" x 3-1\/2\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C.E. Smith","offers":[{"title":"Default Title","offer_id":52024025710773,"sku":"QBP963333","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1241405_qbp963333.jpg?v=1763263200"},{"product_id":"qbp586783","title":"Raymarine Paddle Wheel Kit, For ST40, ST60, ST60 Plus, 365\/470\/750","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine R69015 is a replacement paddle wheel kit for Raymarine ST40, ST60, ST60 PLUS, 365, 470, and 750 speed transducers. It is used to service the moving wheel assembly that helps the transducer read speed through the water, making it a practical maintenance part for boats with older Raymarine instrument systems.\u003c\/p\u003e\u003cp\u003eThe kit includes the paddle wheel, a stainless axle, and rubber o-rings, so the common wear parts can be replaced together instead of changing the whole transducer assembly. It is a useful spare to keep on board or in the service kit, especially for vessels that spend time in fouling-prone water where paddle wheels can wear, seize, or lose sensitivity over time.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement paddle wheel kit for compatible Raymarine ST40, ST60, ST60 PLUS, 365, 470, and 750 speed transducers.\u003c\/li\u003e\n\u003cli\u003eIncludes the paddle wheel, stainless axle, and rubber o-rings needed for a basic paddle wheel service.\u003c\/li\u003e\n\u003cli\u003eHelps address speed-through-water issues caused by a worn wheel, damaged axle, or tired o-rings.\u003c\/li\u003e\n\u003cli\u003eSuitable for routine instrument maintenance during haul-out, bottom cleaning, or transducer inspection.\u003c\/li\u003e\n\u003cli\u003eSmall service part that is easy to store with other onboard electronics and instrument spares.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is intended for Raymarine speed transducers used with ST40, ST60, ST60 PLUS, 365, 470, and 750 systems. Before installation, match the existing transducer and instrument family to those listed models, especially on boats that have had electronics refits or partial instrument upgrades over the years.\u003c\/p\u003e\u003ch6\u003eInstallation and maintenance\u003c\/h6\u003e\u003cp\u003eService the paddle wheel following the normal removal and refit procedure for the vessel’s transducer. Clean away marine growth, inspect the transducer body, and confirm that the new wheel spins freely on the stainless axle before returning the sensor to use.\u003c\/p\u003e\u003cp\u003eAfter installation, check the speed reading at low speed and during normal running conditions. A clean wheel and sound o-rings are important for consistent speed data on cruising boats, fishing boats, and sailboats that rely on speed-through-water for trim, navigation, and instrument calculations.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePaddle wheel\u003c\/li\u003e\n\u003cli\u003eStainless axle\u003c\/li\u003e\n\u003cli\u003eRubber o-rings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52024097767605,"sku":"QBP586783","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330512_qbp586783.jpg?v=1780192100"},{"product_id":"qbp573888","title":"FLIR Free Standing Mount R70375","description":"\u003cp\u003e\u003cstrong\u003eFree Standing Mount\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFLIR Free Standing Mount for FLIR's AX8™ and Raymarine Dragonfly 4\/5\/7.\u003c\/p\u003e","brand":"FLIR Systems","offers":[{"title":"Default Title","offer_id":52024097833141,"sku":"QBP573888","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1245966_qbp573888.jpg?v=1763264807"},{"product_id":"qbp137375","title":"Magma Angled SUP Arms R10-1020","description":"\u003cp\u003e\u003cstrong\u003eAngled SUP Arms\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDesigned specifically for use with any of Magma’s storage rack systems and angled to maximize space.\u003c\/p\u003e \u003cp\u003eThese arms are perfect for storing SUP’s or other water sports boards. Constructed with 1 in. (25.4 mm) Dia. 304 Marine Grade Mirror Polished Stainless Steel tubing and include Stainless Steel installation fasteners. Each arm has a tie-down point for securing boards while the pre-installed UV resistant foam padding with heavy duty UV resistant 600D Polyester protective covers help protect them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMagma R10-1003-64 and R10-1002-64 racks\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIncludes UV Resistant Polyethylene Foam Pads\u003c\/li\u003e \u003cli\u003eSUP Arms are angled\/bent to hold your SUP safely in place\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMaterial - 304 Marine grade Stainless Steel\u003c\/li\u003e \u003cli\u003eDimensions (L x W x H) - 20-5\/8\" x 2-1\/4\" x 12-3\/4\" (52.4 x 5.7 x 32.4 cm)\u003c\/li\u003e \u003cli\u003eWeight - 5.6 lbs (2.55 kg)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e*Sold as a Pair\u003c\/p\u003e","brand":"Magma","offers":[{"title":"Default Title","offer_id":52024120508597,"sku":"QBP137375","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1247411_qbp137375.jpg?v=1763265348"},{"product_id":"qbp969734","title":"Magma Straight Kayak Arms - 36\" R10-1010-36","description":"\u003cp\u003e\u003cstrong\u003eStraight Kayak Arms - 36\"\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eDesigned specifically for use with any of Magma’s storage rack systems.\u003c\/p\u003e \u003cp\u003eThese straight arms are perfect for storing large kayaks or water toys. Constructed with 1-1\/2 in. (38.1 mm) Dia. 304 Marine Grade Mirror Polished Stainless Steel tubing and includes Stainless Steel installation fasteners. Each arm has a tie-down point for securing toys while the pre-installed UV resistant foam padding with heavy duty UV resistant 600D Polyester protective covers help protect them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMagma R10-1003-64 and R10-1002-64 racks\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIncludes UV Resistant Polyethylene Foam Pads\u003c\/li\u003e \u003cli\u003ePerfect for storing large kayaks and water toys\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMaterial - 304 Marine grade Stainless Steel\u003c\/li\u003e \u003cli\u003eDimensions (L x W x H) - 36\" x 2-3\/4\" x 2-3\/4\" (91.4 x 6.9 x 6.9 cm)\u003c\/li\u003e \u003cli\u003eWeight - 6.2 lbs (2.8 kg)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e*Sold as a Pair\u003c\/p\u003e","brand":"Magma","offers":[{"title":"Default Title","offer_id":52024125915317,"sku":"QBP969734","price":167.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1247843_qbp969734.jpg?v=1763265455"},{"product_id":"qbp361969","title":"Nauticus HydroPlane Plates - 8\" x 7.5\" HD800","description":"\u003cp\u003e\u003cstrong\u003eHydroPlane Plates - 8\" x 7.5\"\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe HydroPlane system features dynamic hinge technology that reacts to water pressure and boat speed to produce a smoother ride and better handling.\u003c\/p\u003e \u003cp\u003eThermo-molded composite construction provides superior strength and resilience in any water conditions. The autonomous trim plates become an extension of the boat’s running surface and require no external activation.\u003c\/p\u003e \u003cp\u003eFor overall stability, faster time to plane, and elimination of common problems like porpoising and chine walking, HydroPlane provides the port-to-starboard balance that hydrofoils cannot.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eNo maintenance\u003c\/li\u003e \u003cli\u003eNo pilot interface\u003c\/li\u003e \u003cli\u003eFaster time to plane\u003c\/li\u003e \u003cli\u003eUses hydrodynamic lift\u003c\/li\u003e \u003cli\u003eUp to 50% more effective than Hydrofoils\u003c\/li\u003e \u003cli\u003eCreates balance\u003c\/li\u003e \u003cli\u003eReduces fuel consumption\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTrim Tab Size (L x W) - 7.5\" x 8.25\"\u003c\/li\u003e \u003cli\u003eBoat Length - Under 16'\u003c\/li\u003e \u003cli\u003eTrim Tab Material - Polypropylene with Glass Fill\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTwo (2) plates\/tabs\u003c\/li\u003e \u003cli\u003eMounting hardware\u003c\/li\u003e \u003cli\u003eInstruction manual\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e*Sold as a Pair\u003c\/p\u003e","brand":"Nauticus","offers":[{"title":"Default Title","offer_id":52024129880245,"sku":"QBP361969","price":59.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1248153_qbp361969.jpg?v=1763265547"},{"product_id":"qbp232587","title":"TH Marine Mini Kong Mount 12\" Plate 5\" Arm Shock Lock SKLK-LALT-DP","description":"\u003cp\u003e\u003cb\u003eTH Marine Mini Kong Mount\u003c\/b\u003e\u003c\/p\u003e Model: SKLK-LALT-DP\u003cbr\u003e \u003cul\u003e \u003cli\u003eUnique \"DOWEL PIN LOCK\" No Slip Joints\u003c\/li\u003e \u003cli\u003eQuick Release Spring Loaded Base\u003c\/li\u003e \u003cli\u003eMulti-Position Pivot Points in Base\u003c\/li\u003e \u003cli\u003eEasy to Adjust Wing Nut Locks on Joints\u003c\/li\u003e \u003cli\u003eThree Models to Fit Any Electronic Unit\u003c\/li\u003e \u003cli\u003eAnnodized Aluminum with Stainless Fasteners\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eKong™ Electronics Mounts are designed to securely hold your heavy marine electronics in place under any condition. Our exclusive \"DOWEL PIN LOCK\" joint locking system ensures that your valuable electronics stay in place where you want them. No more worries about your electronics slipping, moving, shifting or smashing on your boat while running in any conditions. The Kong™ Mini was tested in the most severe conditions by top touring pros.\u003c\/p\u003e \u003cp\u003eWhen your day is done simply pull the spring loaded tab at the base to release the Kong Mini and your electronic unit from the base freeing it to be locked away and protected. The Kong Mini is made from anodized aircraft aluminum and stainless steel for strength and durability.\u003c\/p\u003e \u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003e \u003ctable style=\"border-collapse: collapse\" width=\"95%\" border=\"1\"\u003e \u003ctr\u003e\n\u003ctd width=\"175px\"\u003eDescription\u003c\/td\u003e\n\u003ctd\u003e5\" arm - 12\" top plate\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":52024133091509,"sku":"QBP232587","price":274.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1248402_qbp232587.jpg?v=1763265616"},{"product_id":"qbp724902","title":"TH Marine Mini Kong Mount 6\" Top Plate No Arm Shock Lock SKLK-NAST-DP","description":"\u003cp\u003e\u003cb\u003eTH Marine Mini Kong Mount\u003c\/b\u003e\u003c\/p\u003e Model: SKLK-NAST-DP\u003cbr\u003e \u003cul\u003e \u003cli\u003eUnique \"DOWEL PIN LOCK\" No Slip Joints\u003c\/li\u003e \u003cli\u003eQuick Release Spring Loaded Base\u003c\/li\u003e \u003cli\u003eMulti-Position Pivot Points in Base\u003c\/li\u003e \u003cli\u003eEasy to Adjust Wing Nut Locks on Joints\u003c\/li\u003e \u003cli\u003eThree Models to Fit Any Electronic Unit\u003c\/li\u003e \u003cli\u003eAnnodized Aluminum with Stainless Fasteners\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eKong™ Electronics Mounts are designed to securely hold your heavy marine electronics in place under any condition. Our exclusive \"DOWEL PIN LOCK\" joint locking system ensures that your valuable electronics stay in place where you want them. No more worries about your electronics slipping, moving, shifting or smashing on your boat while running in any conditions. The Kong™ Mini was tested in the most severe conditions by top touring pros.\u003c\/p\u003e \u003cp\u003eWhen your day is done simply pull the spring loaded tab at the base to release the Kong Mini and your electronic unit from the base freeing it to be locked away and protected. The Kong Mini is made from anodized aircraft aluminum and stainless steel for strength and durability.\u003c\/p\u003e \u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003e \u003ctable style=\"border-collapse: collapse\" width=\"95%\" border=\"1\"\u003e \u003ctr\u003e\n\u003ctd width=\"175px\"\u003eDescription\u003c\/td\u003e\n\u003ctd\u003eNo arm - 6\" top plate\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":52024133157045,"sku":"QBP724902","price":233.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1248404_qbp724902.jpg?v=1763265618"},{"product_id":"qbp675304","title":"TH Marine Mini Kong Mount 6\" Top Plate 3\" Arm Shock Lock SKLK-SAST-DP","description":"\u003cp\u003e\u003cb\u003eTH Marine Mini Kong Mount\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eModel: SKLK-SAST-DP\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUnique \"DOWEL PIN LOCK\" No Slip Joints\u003c\/li\u003e \u003cli\u003eQuick Release Spring Loaded Base\u003c\/li\u003e \u003cli\u003eMulti-Position Pivot Points in Base\u003c\/li\u003e \u003cli\u003eEasy to Adjust Wing Nut Locks on Joints\u003c\/li\u003e \u003cli\u003eThree Models to Fit Any Electronic Unit\u003c\/li\u003e \u003cli\u003eAnnodized Aluminum with Stainless Fasteners\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eKong™ Electronics Mounts are designed to securely hold your heavy marine electronics in place under any condition. Our exclusive \"DOWEL PIN LOCK\" joint locking system ensures that your valuable electronics stay in place where you want them. No more worries about your electronics slipping, moving, shifting or smashing on your boat while running in any conditions. The Kong™ Mini was tested in the most severe conditions by top touring pros.\u003c\/p\u003e \u003cp\u003eWhen your day is done simply pull the spring loaded tab at the base to release the Kong Mini and your electronic unit from the base freeing it to be locked away and protected. The Kong Mini is made from anodized aircraft aluminum and stainless steel for strength and durability.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":52024133189813,"sku":"QBP675304","price":260.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1248405_qbp675304.jpg?v=1763265619"},{"product_id":"qbp156452","title":"TH Marine Kong Wave Tamer Flat Mount Black SKTM-F-BK-DP","description":"\u003cp\u003e\u003cb\u003eTH Marine Kong Wave Tamer\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eModel: SKTM-F-BK-DP\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHeavy gauge aluminum construction\u003c\/li\u003e \u003cli\u003eProtects electronics from extreme conditions\u003c\/li\u003e \u003cli\u003eAnodized finish—black\u003c\/li\u003e \u003cli\u003eUniversal hole pattern fits most electronics brackets. Can easily be drilled for any other models.\u003c\/li\u003e \u003cli\u003eAllows electronics to be mounts in center of front deck behind trolling motor pedal\u003c\/li\u003e \u003cli\u003eAllows easy viewing while fishing from either side of boat\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/p\u003e \u003ctable border=\"1\" width=\"95%\" style=\"border-collapse: collapse;\"\u003e \u003ctr\u003e \u003ctd width=\"175px\"\u003eDescription\u003c\/td\u003e \u003ctd\u003eKong Wave Tamer Black\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":52024133222581,"sku":"QBP156452","price":123.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1248406_qbp156452.jpg?v=1763265619"},{"product_id":"qbp256221","title":"TH Marine Kong Wave Tamer Flat Mount Red SKTM-F-R-DP","description":"\u003cp\u003e\u003cb\u003eTH Marine Kong Wave Tamer\u003c\/b\u003e\u003c\/p\u003e Model: SKTM-F-R-DP\u003cbr\u003e \u003cul\u003e \u003cli\u003eHeavy gauge aluminum construction\u003c\/li\u003e \u003cli\u003eProtects electronics from extreme conditions\u003c\/li\u003e \u003cli\u003eAnodized finish—red\u003c\/li\u003e \u003cli\u003eUniversal hole pattern fits most electronics brackets. Can easily be drilled for any other models.\u003c\/li\u003e \u003cli\u003eAllows electronics to be mounts in center of front deck behind trolling motor pedal\u003c\/li\u003e \u003cli\u003eAllows easy viewing while fishing from either side of boat\u003c\/li\u003e \u003c\/ul\u003e \u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003e \u003ctable border=\"1\" width=\"95%\" style=\"border-collapse: collapse\"\u003e \u003ctr\u003e \u003ctd width=\"175px\"\u003eDescription\u003c\/td\u003e \u003ctd\u003eKong Wave Tamer Red\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":52024133255349,"sku":"QBP256221","price":123.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1248407_qbp256221.jpg?v=1763265621"},{"product_id":"qbp311823","title":"Balmar Mounting Plate f\/SG200 Display - Fits Smartguage™ Cutout SG2-0402","description":"\u003cp\u003e\u003cstrong\u003eMounting Plate for SG200 Display - Fits Smartguage™ Cutout\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eBalmar’s Award Winning, 2nd Generation Battery Monitor\u003c\/p\u003e \u003cp\u003eOptional Adapter Plate for Fitting the SG200 Color Display into a Smartgauge™ Cutout\u003c\/p\u003e \u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"Balmar","offers":[{"title":"Default Title","offer_id":52024149442741,"sku":"QBP311823","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1249368_qbp311823.jpg?v=1763265961"},{"product_id":"qbp309670","title":"Metz L Bracket 305","description":"\u003cp\u003e\u003cb\u003eMetz L Bracket\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eModel: 205\u003c\/p\u003e \u003cp\u003eMetz L Bracket\u003c\/p\u003e \u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003e \u003ctable style=\"border-collapse: collapse\" width=\"95%\" border=\"1\"\u003e \u003ctr\u003e \u003ctd width=\"175px\"\u003ePart Number\u003c\/td\u003e \u003ctd\u003eMETLBRKT\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd width=\"175px\"\u003eFreight Program\u003c\/td\u003e \u003ctd\u003eQualifies for Ground and 2 Da\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd width=\"175px\"\u003eVendor Item Number\u003c\/td\u003e \u003ctd\u003e205\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd width=\"175px\"\u003eBrand\u003c\/td\u003e \u003ctd\u003eMetz\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e","brand":"Metz Antennas","offers":[{"title":"Default Title","offer_id":52024174248117,"sku":"QBP309670","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1251278_qbp309670.jpg?v=1763266582"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/collections\/1119348_mounting-hardware.jpg?v=1763133828","url":"https:\/\/www.qualityboatparts.com\/collections\/mounting-hardware.oembed?page=2","provider":"Quality Boat Parts","version":"1.0","type":"link"}