{"title":"Lumitec","description":"","products":[{"product_id":"qbp165023","title":"Lumitec Mirage Glass Flush Mount LED Down Light, White\/Red\/Green, 10-30V, IP67, 6W, Polished Finish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101236 is a flush-mount LED downlight with a glass lens and white\/red\/green output for overhead lighting on board. It runs on 10-30 VDC (12V or 24V systems), draws 6 W, and produces up to 380 lumens on white. The light is sealed to IP67 for wet areas and washdowns.\u003c\/p\u003e\u003cp\u003eThe face measures 3.25 in (8.25 cm) across, with a 2.00 in mounting hole requirement. Behind the panel, plan for about 1.11 in (2.81 cm) of depth and a body diameter up to 3.73 in (9.47 cm) to clear the spring clips and wiring.\u003c\/p\u003e\u003cp\u003eColor changes are handled with timed on\/off toggles from a standard switch, and the light is PLI enabled for integration with compatible Lumitec control systems.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWhite\/red\/green output in one fixture for task lighting and night-friendly modes\u003c\/li\u003e\n\u003cli\u003e10-30 VDC input for 12V and 24V DC systems\u003c\/li\u003e\n\u003cli\u003e6 W draw with up to 380 lumens on white\u003c\/li\u003e\n\u003cli\u003eIP67 sealed for damp spaces and washdowns (not for permanent underwater mounting)\u003c\/li\u003e\n\u003cli\u003e3.25 in face with a 2.00 in cutout; about 1.11 in depth behind the panel\u003c\/li\u003e\n\u003cli\u003eSpring-clip mounting for quick installs in headliners, hardtops, and consoles\u003c\/li\u003e\n\u003cli\u003ePolarity-sensitive two-wire hookup: black to negative, white or red to positive\u003c\/li\u003e\n\u003cli\u003eTimed Toggled Protocol (TTP) control from a standard on\/off switch for mode changes\u003c\/li\u003e\n\u003cli\u003ePLI enabled for syncing and control in compatible Lumitec systems\u003c\/li\u003e\n\u003cli\u003ePlan circuit protection for up to 500 mA at 12 VDC (250 mA at 24 VDC) per light\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eCut a clean 2.00 in hole, confirm the backside has clearance for the spring clips, then pull the springs back and press the light into place until it seats. Leave enough slack in the wiring so the fixture can be pulled down later for service without yanking on connections.\u003c\/p\u003e\u003cp\u003eIf you are installing into a cored panel, seal the exposed core around the cutout to keep moisture from wicking into the laminate. On thin headliners, check that the spring clips have solid material to bite into.\u003c\/p\u003e\u003ch6\u003eElectrical and control\u003c\/h6\u003e\u003cp\u003eWire the light directly to your DC distribution with an appropriately sized fuse or breaker, and size the protection based on the number of lights on the circuit. The unit is polarity sensitive, so verify positive and negative before powering up.\u003c\/p\u003e\u003cp\u003eFor control, the light can be switched with a simple SPST toggle or rocker. Quick off\/on cycles step through the available output modes, while an off period of a few seconds returns the light to its default state.\u003c\/p\u003e\u003ch6\u003ePlacement and use on board\u003c\/h6\u003e\u003cp\u003eThis style of downlight is a common fit for cabins, heads, passageways, cockpits, T-tops, and helm overhangs where you want a clean overhead finish. Red and green modes are handy when you want lower visual impact at night while still seeing what you are doing on deck.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt spray when practical and wipe the lens with a soft cloth. Avoid abrasive cleaners that can haze the lens or mark the finish, and periodically check wiring connections if the fixture lives in a high-vibration area.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268847890613,"sku":"QBP165023","price":136.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297910_qbp165023.jpg?v=1771540438"},{"product_id":"qbp165908","title":"Lumitec Mantis Dock Light Power Supply, 110VAC Input, 24VDC Output, 150W","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101528 is a replacement power supply and control box for the Mantis dock lighting system, converting 100 to 120VAC (50\/60Hz) to 24VDC for the lights.\u003c\/p\u003e\u003cp\u003eIt is meant to mount above the waterline in an outdoor wet location, feeding the dock lights on the low-voltage side through the bottom cable glands. Total connected load should stay at or below 110W, and the supply is intended for up to four Mantis-Quattro lights on one power unit.\u003c\/p\u003e\u003cp\u003eThis is a practical fit when your Mantis lights and cabling are already in place and you need to bring the system back online with the correct power and switching behavior.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eInput power: 100 to 120VAC, 50\/60Hz, for connection to a GFCI-protected circuit\u003c\/li\u003e\n\u003cli\u003e24VDC output for Mantis dock lights; connections are made on the low-voltage side (red to red, black to black)\u003c\/li\u003e\n\u003cli\u003eRated for up to 110W maximum load and supports up to 4 Mantis-Quattro lights on one power unit\u003c\/li\u003e\n\u003cli\u003eWeatherproof enclosure for outdoor wet locations; install at least 1 foot above ground with cables pointing down\u003c\/li\u003e\n\u003cli\u003eCan be switched with a timer, photocell, or toggle switch feeding the receptacle; do not connect the power unit to a dimmer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting location so every light cable reaches the power unit without chafe points, and keep all installer-made connections outside the body of water. The enclosure should not be submerged and should be kept out of spots that take repeated direct wave action.\u003c\/p\u003e\u003cp\u003eHigh-voltage components are prewired inside the unit, so field wiring is focused on the 24VDC side. Route the low-voltage cables in through the bottom glands, tighten the glands to support the cables, then make the DC connections with no bare conductor exposed.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis power supply is used with Mantis dock lighting systems and is intended for installations where the underwater lights are fully submerged in fresh or salt water. For system planning, the listed maximum depth is 8 feet, and cable splices need to stay outside the water even with tidal changes.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDisconnect power before opening the enclosure or servicing the system. Periodically check for loose connections, damaged cable jackets, heat discoloration, and signs of corrosion or water intrusion inside the unit, especially in saltwater environments.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268848775349,"sku":"QBP165908","price":482.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297916_qbp165908.jpg?v=1771540443"},{"product_id":"qbp166182","title":"Lumitec Caprera3 Bracket-Mount LED Flood Light, Spectrum Halo, White Housing, 1200 Lumens, IP67, 12\/24VDC","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101742 is a compact LED flood and spreader light with a white housing, IP67 sealing, and a wide 10-30VDC input for 12V and 24V systems. It delivers 1,200+ lumens of white light while drawing 12W, with current draw up to 1.0A at 12V (0.5A at 24V).\u003c\/p\u003e\u003cp\u003eThis Caprera3-size fixture is commonly mounted on a hardtop, radar arch, tower, or spreader base when you want a broad wash of light over the cockpit, foredeck, or working area. The Spectrum Halo version adds color-capable lighting effects for when you want something other than straight white.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10-30VDC input for typical 12V and 24V DC systems\u003c\/li\u003e\n\u003cli\u003e1,200+ lumens of white output, 12W draw, up to 1.0A at 12V (0.5A at 24V)\u003c\/li\u003e\n\u003cli\u003eIP67 rated sealing for exposed mounting locations and washdowns\u003c\/li\u003e\n\u003cli\u003ePowder-coated die-cast aluminum housing with a heat tempered glass lens\u003c\/li\u003e\n\u003cli\u003eCompact footprint: 3.79in wide, 1.10in tall, 2.49in deep\u003c\/li\u003e\n\u003cli\u003eTimed Toggle Protocol control so dimming and color functions can be accessed from a standard on and off switch\u003c\/li\u003e\n\u003cli\u003eCompatible with the Lumitec POCO system for digital lighting control\u003c\/li\u003e\n\u003cli\u003eOver 2,000+ hours of ASTM B-117 salt spray chamber testing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount it where the beam can clear rails and rigging and spread across the cockpit or deck without shining directly into the helm. Plan your wire exit and sealing before drilling, and bed any fasteners and the wire pass-through with marine sealant to keep water out of the core or tubing.\u003c\/p\u003e\u003cp\u003eAllow a little room around the light body for aiming and service. If you are replacing an older spreader or flood, compare the available mounting space to the 3.79in by 1.10in by 2.49in housing size so the new light does not interfere with antennas, grab rails, or canvas.\u003c\/p\u003e\u003ch6\u003eElectrical and control\u003c\/h6\u003e\u003cp\u003eConnect black to negative (ground) and red to +12VDC or +24VDC on a protected circuit with an appropriately sized fuse or breaker. Maximum draw is up to 1.00A at 12VDC and 0.50A at 24VDC, which helps when you are sizing wire runs on a hardtop or mast.\u003c\/p\u003e\u003cp\u003eTimed Toggle Protocol makes control straightforward on boats that do not want extra controllers at the switch panel. The light ramps on at startup, and quick off and on toggles are used for dimming and for accessing the Spectrum color functions, with an option to lock a chosen color during the cycle.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis light fits boats that need a spread of usable light for rigging, docking prep, night fishing, or loading gear, and that also want color-capable lighting for evenings at anchor without running special control wiring. It works equally well on center consoles, pilothouse boats, and sailboats where a compact spreader style fixture is easier to place on an arch or mast.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt buildup from the housing and lens during routine washdowns, especially after offshore runs. Avoid abrasive pads on the lens, and periodically check that mounting hardware and the cable entry seal remain tight after a season of vibration and thermal cycling.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268849823925,"sku":"QBP166182","price":241.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297921_qbp166182.png?v=1771540447"},{"product_id":"qbp166561","title":"Lumitec Caprera3 Bracket Mount LED Flood Light, Spectrum Halo RGBW, Black Housing, 10-30V, 1,200+ lm, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101743 is a Caprera3 bracket-mount flood\/spreader light with a black housing and Spectrum Halo output for deck, cockpit, and spreader lighting.\u003c\/p\u003e\u003cp\u003eIn white mode it puts out 1,200+ lumens at 5000K (CRI 70+) and runs on 10-30V DC, so it fits both 12V and 24V systems. The die-cast aluminum body and heat-tempered glass lens are sealed to IP67 for rain, spray, and routine washdowns.\u003c\/p\u003e\u003cp\u003eSpectrum Halo adds a dimmable, colored glow that works well when you want light on deck without blasting full white. The beam is a flood pattern, so it covers a wide area rather than a tight spot.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10-30V DC input for 12V and 24V systems; rated 12W and draws up to 1.0A at 12V (0.5A at 24V)\u003c\/li\u003e\n\u003cli\u003e1,200+ lumens in white output with 5000K color temperature and CRI 70+\u003c\/li\u003e\n\u003cli\u003eFlood\/spreader beam pattern for broad coverage across a cockpit, aft deck, or foredeck\u003c\/li\u003e\n\u003cli\u003eIP67 sealed construction for wet mounting locations and washdowns\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminum housing with heat-tempered glass and a black finish that blends into towers and hardtops\u003c\/li\u003e\n\u003cli\u003eSimple two-wire hookup (red positive, black negative) with built-in Timed Toggle Protocol for dimming and color functions\u003c\/li\u003e\n\u003cli\u003eReverse polarity and surge protection to help handle real-world boat power\u003c\/li\u003e\n\u003cli\u003eCompatible with Lumitec Poco digital lighting control systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe bracket mount makes aiming straightforward. Mount it on a hardtop, radar arch, tower, or spreader base, then set the angle to keep light on the working area and off the helm. The light body measures 3.79 in wide x 1.10 in high x 2.49 in deep, which helps when you are fitting lights into tight hardtop overhangs.\u003c\/p\u003e\u003cp\u003ePlan the wiring route so the cable is protected from chafe and does not cross hinge points or moving canvas hardware. On sailboats, aim the flood so it clears the sail track and does not throw glare back into the cockpit.\u003c\/p\u003e\u003ch6\u003eElectrical and control\u003c\/h6\u003e\u003cp\u003eConnect to a protected DC circuit within the 10-30V range. Current draw is up to about 1.0A on a 12V system and 0.5A on a 24V system, which is helpful when you are sizing wiring and overcurrent protection for multiple spreaders.\u003c\/p\u003e\u003cp\u003eControl features are built into the light. With a standard on\/off switch, brief power toggles are used to access dimming and color modes, and the light can also be tied into a Poco system when you want centralized control.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats that need a bright white work light for docking, line handling, and cleanup, and also want a softer colored glow for evenings at anchor or at the dock. Common mounting spots include under a hardtop for cockpit coverage, aft-facing on a radar arch, or on spreaders for lighting the foredeck.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse after saltwater use and avoid harsh solvents on the lens and gasket. Periodically check mounting fasteners for loosening from vibration and re-aim the bracket if your typical use changes from fishing to docking or night passages.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268850806965,"sku":"QBP166561","price":240.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297927_qbp166561.jpg?v=1771540450"},{"product_id":"qbp166583","title":"Lumitec Perimeter LED Flood Light, White\/Amber Flashing, White Housing, 10-30V, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101744 is a low-profile LED flood light for deck and perimeter lighting, and it runs on 10-30 VDC so it works on 12V and 24V systems.\u003c\/p\u003e\u003cp\u003eOutput is about 1,000 lumens with a beam that spreads light widely across work areas. Power draw is 16W (about 1.3A at 12V and 0.6A at 24V) and the housing is sealed to IP67 for spray and washdowns. The white light is 5000K with CRI 70+ for clear, usable illumination when you are handling lines, loading gear, or checking systems at night.\u003c\/p\u003e\u003cp\u003eThis configuration combines a dimmable white channel with an amber flashing output, with the functions controlled independently for practical on-board use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10-30 VDC input for 12V and 24V DC systems\u003c\/li\u003e\n\u003cli\u003e16W draw (about 1.3A at 12V and 0.6A at 24V)\u003c\/li\u003e\n\u003cli\u003eAbout 1,000-lumen flood beam for close-in deck, cockpit, and dock lighting\u003c\/li\u003e\n\u003cli\u003e5000K white output with CRI 70+ for detail that stays easy to read\u003c\/li\u003e\n\u003cli\u003eDimmable white channel plus an amber flashing output, controlled separately\u003c\/li\u003e\n\u003cli\u003eTimed Toggled Protocol (TTP) control and compatibility with third-party dimmers\u003c\/li\u003e\n\u003cli\u003eIP67-rated sealing for exposed mounting in wet areas\u003c\/li\u003e\n\u003cli\u003eSurface-mount aluminum housing with an impact-resistant plastic window\u003c\/li\u003e\n\u003cli\u003eSize: 6.36 in W x 1.73 in H x 1.48 in D\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe unit is a surface-mount light that installs with #6 fasteners and a 1\/4 in wire exit hole. On boats, bed the fasteners and wire pass-through with a marine sealant so water stays out of the core and the wiring cavity.\u003c\/p\u003e\u003cp\u003eFor deck lighting with minimal up-shine, a common mounting height is about 3 to 4 ft above the surface. In service spaces, mount it where the beam lands on the work area rather than straight down onto the back of the panel or the side of the engine.\u003c\/p\u003e\u003ch6\u003eElectrical and switching\u003c\/h6\u003e\u003cp\u003eWire it on a fused DC circuit and use marine-grade switching and connections that match the load. The light includes over-temperature protection to help manage heat in tight spaces, but clean wiring and correct fusing still matter.\u003c\/p\u003e\u003cp\u003eThe white output supports dimming via the timed toggle behavior, and the amber flashing function is switched independently. This layout is handy when you want steady white working light most of the time and a separate flashing signal when needed.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis light is meant for 10-30 VDC systems, so it fits most common 12V and 24V installations without a converter. Before drilling, confirm you have clearance behind the mounting surface for the wiring bend radius and that the beam direction works with rails, canvas, or other hardware nearby.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eIt is a good match for boats that want a clean flood on deck edges, aft work areas, or boarding zones while keeping glare down, and for docks or boat lifts where you want broad white light plus a separate amber flashing output. It also makes sense in cramped mechanical spaces where you need light that can be aimed across components instead of straight down.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt off periodically and check fasteners and cable routing after the first few runs, especially if the mounting surface flexes. If you use cleaners, avoid harsh solvents that can haze plastics.\u003c\/p\u003e\u003cp\u003eWarranty coverage is 5 years from the date of purchase for products purchased from January 1, 2025 onward; purchases before that date carry a 3-year warranty.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268851134645,"sku":"QBP166583","price":233.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297933_qbp166583.jpg?v=1771540452"},{"product_id":"qbp166859","title":"Lumitec Capri3 LED Spreader Light, Spectrum Halo, Black Housing, 10-30V, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101745 is a flush-mount LED flood light for deck, cockpit, and spreader lighting, built for 10-30 VDC systems and sealed to an IP67 rating. It outputs 1200 lumens with a flood beam pattern, draws up to 1.0A at 12V (0.5A at 24V), and is rated at 12W.\u003c\/p\u003e\u003cp\u003eIt uses a black-finish housing and a spring clip mounting system that leaves no exposed fasteners on the face once installed. On compatible models, dimming and color functions can be controlled from a standard on and off switch using timed toggles, and the light can integrate into Lumitec Poco digital lighting control through built-in PLI.\u003c\/p\u003e\u003cp\u003eFor fit planning, the body measures 4.08in wide, 1.39in high, and 1.43in deep, with an operating temperature range of -31F to +131F.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10-30 vDC input for 12V and 24V onboard electrical systems\u003c\/li\u003e\n\u003cli\u003e1200-lumen output with a flood beam pattern for work and deck illumination\u003c\/li\u003e\n\u003cli\u003eCurrent draw up to 1.0A at 12V and 0.5A at 24V (12W rating)\u003c\/li\u003e\n\u003cli\u003eIP67-rated sealing for spray, rain, and washdowns in exposed mounting locations\u003c\/li\u003e\n\u003cli\u003eSpring clip, flush-mount installation with no exposed fasteners on the front face\u003c\/li\u003e\n\u003cli\u003eTimed toggle control from a standard switch for dimming and color features on compatible models\u003c\/li\u003e\n\u003cli\u003ePLI support for integration with Lumitec Poco modules on compatible models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a flush-mount style light meant to sit clean on a hardtop, arch, tower, or similar flat mounting surface. With an overall size of 4.08in wide by 1.39in high and 1.43in depth, confirm you have clearance behind the panel for the light body, wiring bend radius, and the spring clips.\u003c\/p\u003e\u003cp\u003eThe black finish blends well on dark tops and powder-coated structures, and it also helps keep glare down when the light is mounted within the skipper’s line of sight.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMounting uses spring mechanisms, so the light holds in place without front fasteners. Cut the mounting hole to the provided template, apply an RTV sealant bead on the back perimeter, connect power and test the light, then retract the springs and press the unit into the opening until it seats. Wipe away any visible sealant before it cures.\u003c\/p\u003e\u003cp\u003eWhen routing wiring through towers or hardtops, leave a service loop and protect the cable where it passes through metal or fiberglass to avoid chafe from vibration.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eWire it as a simple two-conductor DC load: red to +12VDC or +24VDC supply and black to negative or ground. Install it on a protected circuit with an appropriately sized fuse or breaker, and budget current draw using up to 1.0A per light at 12V (0.5A at 24V) when planning multi-light installs on a spreader bar or under a hardtop.\u003c\/p\u003e\u003cp\u003eFor boats using Lumitec Poco, PLI-equipped models can be brought into the lighting network for more granular control and scene management. If you are running only a switch leg, timed toggles allow access to dimming and color functions on compatible models without adding external control modules.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis light fits well as a spreader or deck flood on sailboats, as an aft cockpit flood on center consoles, or as a general-purpose hardtop light for docking, rigging, and night fishing. It is a good match for owners who want a flush look, strong flood coverage, and sealing that stands up to salt spray and routine washdowns.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue from the lens and housing after heavy spray days, especially in tower and hardtop installs. Periodically inspect the sealant line and wiring entry points, and rework any chafe protection before it turns into a fault.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268881084597,"sku":"QBP166859","price":232.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297935_qbp166859.jpg?v=1771540616"},{"product_id":"qbp779132","title":"Lumitec Pico OHM Expansion Module, For Poco Digital Lighting Control, 10-16V DC, 400mA Max, White Housing, 4pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101829 is a Pico OHM expansion module that lets a Poco Digital Lighting Control system control third-party RGB lighting accessories that do not have built-in PLI technology. It runs on 10-16V DC, supports up to 400 mA per module, and the housing measures 1.5 in wide by 1.35 in high by 0.3 in deep.\u003c\/p\u003e\u003cp\u003eIt mounts at the accessory, then converts the connection to a simple two-wire run back to the Poco system, which helps cut down on long RGB wire bundles in tight rigging paths. Pico OHM is sold in packs of four modules, making it practical when you are adding multiple RGB accessories across the cockpit, cabin, or hardtop and want them controlled from the same Poco interface.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAdds Poco-only control for third-party RGB accessories (no TTP)\u003c\/li\u003e\n\u003cli\u003eMounts at the accessory and converts the connection to a simple two-wire run back to the controller\u003c\/li\u003e\n\u003cli\u003e10-16V DC operating range for 12V onboard electrical systems\u003c\/li\u003e\n\u003cli\u003e400 mA maximum load per module (Max Amp\/ch 400 mA)\u003c\/li\u003e\n\u003cli\u003eCompact footprint: 1.5 in x 1.35 in x 0.3 in (W x H x D)\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -35°C to +55°C (-31°F to +131°F)\u003c\/li\u003e\n\u003cli\u003eWhite housing; PLI enabled; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eFour Pico OHM expansion modules (white)\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe module is meant to sit right at the RGB accessory, such as a lighted speaker ring or cup holder. Keeping it close to the load helps keep the installation tidy and reduces the need to pull multi-conductor RGB wiring long distances through the boat.\u003c\/p\u003e\u003cp\u003ePlan your wire routing so the two-wire run back to the Poco system is protected from chafe, heat, and vibration. In wet zones, take the same approach you would for any low-voltage accessory wiring: secure the run, provide strain relief at the accessory, and seal connections with marine-grade terminations.\u003c\/p\u003e\u003ch6\u003eCompatibility and system notes\u003c\/h6\u003e\u003cp\u003eThis module is intended for boats already using the Poco Digital Lighting Control system, where you want centralized control of RGB accessories that are not PLI-enabled. It is a good match for installers who want consistent scene control and color output across a mixed lighting and accessory setup.\u003c\/p\u003e\u003cp\u003eWith a 10-16V input range, it is suited to 12V systems and is not a direct fit for 24V circuits. Confirm the accessory current draw stays within the 400 mA limit per module before wiring it into the system.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003ePico OHM modules are commonly used when adding RGB accents that you want to behave like the rest of the Poco-controlled lighting: speaker lighting in the cockpit, illuminated cup holders under the gunwale, or RGB accent pieces in seating and helm areas. They are also helpful when you are refitting a boat and want to keep the control method consistent instead of mixing separate RGB remotes and controllers.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter the first few outings, recheck terminations and mounting for any looseness from vibration, then inspect periodically during routine electrical checks. Keeping the module and connections clean, dry, and well supported goes a long way toward trouble-free lighting control over time.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268881313973,"sku":"QBP779132","price":182.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297939_qbp779132.jpg?v=1771540618"},{"product_id":"qbp167339","title":"Lumitec GAI2 LED Positionable Light, 10-30V, 6W, IP67, Surface Mount, 5000K Cool White, White Housing, 340 lm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 111823 is a positionable LED utility light with a heavy duty surface-mount base for general lighting and close-up tasks on a boat. It runs on 10-30 VDC for 12V and 24V systems, uses 6W, and outputs 340 lumens of 5000K white light. The fixture is sealed to IP67 for wet locations and washdowns, and this version has no built-in switch so it can be controlled from a panel switch or upstream dimmer circuit.\u003c\/p\u003e\u003cp\u003eThe round base measures 2.53 inches across, which helps when you are fitting lighting onto a bulkhead, overhead, or cockpit sidewall. Because the head is aimable, you can point light at a chart table, steps, a berth, or a work area without lighting up the whole cabin.\u003c\/p\u003e\u003cp\u003eThis is a good match for boaters who want a clean, cool-white work-light look in a compact fixture, especially in spots that see spray, vibration, and frequent use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10-30 VDC input for 12V and 24V DC systems\u003c\/li\u003e\n\u003cli\u003e6W LED output with 340 lumens of 5000K white light\u003c\/li\u003e\n\u003cli\u003eIP67 sealed for exterior mounting and washdown zones\u003c\/li\u003e\n\u003cli\u003eAimable head to direct light where you need it\u003c\/li\u003e\n\u003cli\u003eSurface-mount base with a 2.53 inch diameter footprint\u003c\/li\u003e\n\u003cli\u003eNo built-in switch for clean installations with remote switching\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting location so the head has room to swivel without hitting trim, doors, or soft goods. If you are installing it outside or in a damp locker, seal the fasteners and the wire pass-through so water cannot migrate into the core or behind panels.\u003c\/p\u003e\u003cp\u003eRoute wiring with a drip loop and secure it so it cannot chafe from vibration. On open decks and in cockpits, keep the run tucked under coamings or inside conduit where it will not get snagged by gear.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eWire it to a protected 10-30 VDC lighting circuit and control it from an external switch at the helm, cabin panel, or a nearby rocker switch location. If you want brightness control, use a compatible dimmer on the supply side and confirm the dimmer is rated for LED loads.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eCommon installs include reading light duties at a berth, task lighting at the helm, cockpit prep lighting, and spot lighting for steps and companionways. The 5000K output reads as a crisp white, which helps when you are sorting lines, checking labels, or doing quick maintenance at night.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue off the exterior when you wash down the boat, especially around the pivot points and base edge. Avoid harsh solvents on the lens and finish, and periodically check that mounting screws stay snug after long runs in chop.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268881576117,"sku":"QBP167339","price":212.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297941_qbp167339.png?v=1771540621"},{"product_id":"qbp167574","title":"Lumitec Orbit Flush Mount LED Down Light, White\/Red\/Blue\/Purple, Black Finish, IP67, 10-30V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 112550 is a flush-mount LED downlight that runs on 10-30 VDC and draws 4 W. It cycles through white (5000K), red, blue, and purple output, and the white channel produces up to 210 lumens with a CRI of 70+.\u003c\/p\u003e\u003cp\u003eIt is IP67 sealed for wet areas on a boat, including spray and washdowns, but it is not intended for permanent underwater mounting. For fit, the trim is 1.99 in in diameter, the required cutout is 1.23 in, and the mounting depth is 0.43 in, which helps when space behind an overhead panel is limited.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10-30 VDC input for common 12 V and 24 V DC systems\u003c\/li\u003e\n\u003cli\u003e4 W draw with up to 210 lumens on white (5000K) and CRI 70+\u003c\/li\u003e\n\u003cli\u003eFour-color output: white, red, blue, and purple\u003c\/li\u003e\n\u003cli\u003eIP67 sealed housing for exterior and interior mounting in wet locations (not for permanent underwater use)\u003c\/li\u003e\n\u003cli\u003eCompact cutout and depth: 1.23 in cutout, 0.43 in mounting depth, 1.99 in outside diameter\u003c\/li\u003e\n\u003cli\u003eSPST on and off switch control; quick power toggles step through colors and the light resets to white after about 2 seconds off\u003c\/li\u003e\n\u003cli\u003eFor circuit sizing, plan for up to 580 mA at 12 VDC or 320 mA at 24 VDC per light\u003c\/li\u003e\n\u003cli\u003eCE certified and not UL certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOrbit flush-mount downlight\u003c\/li\u003e\n\u003cli\u003eMounting plate\u003c\/li\u003e\n\u003cli\u003eMounting screws\u003c\/li\u003e\n\u003cli\u003eYellow rubber installation tool\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eUse the cutout template to drill the cutout and screw holes, fasten the mounting plate with the text facing out, then insert the light and rotate it until it clicks into place. The rubber tool can help you get enough grip to fully seat the twist-lock.\u003c\/p\u003e\u003cp\u003eWire to the boat's DC system with correct polarity: black to negative and the positive lead to the switched +12 VDC or +24 VDC feed. Protect the lighting circuit with an appropriately sized fuse or breaker, especially when several lights share one switch.\u003c\/p\u003e\u003ch6\u003eControl and color operation\u003c\/h6\u003e\u003cp\u003eColor changing is handled on the power feed. Turn the light off and immediately back on to cycle to the next color. If the circuit stays off for roughly 2 seconds, the light resets so the next power-up comes on in white. If multiple lights on the same switch get out of sync, turning the circuit off for about 3 seconds brings them back together.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for cabin overheads, helm hardtops, T-tops, and mezzanine spaces where you want a white task light for cleanup and rigging, plus colored modes for low-glare night running or a softer look at anchor, without adding a separate controller or extra control wires.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268881608885,"sku":"QBP167574","price":130.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297946_qbp167574.png?v=1771540623"},{"product_id":"qbp167721","title":"Lumitec Orbit Flush Mount LED Down Light, Spectrum RGBW, Black Housing, 10-30V DC, IP67, 4W, 5000K White","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 112557 is a flush-mount LED downlight with a black finish and Spectrum RGBW color plus a 5000K white mode for 10-30V DC boats.\u003c\/p\u003e\u003cp\u003eIt’s rated at 4W and draws about 290 mA at 12V (160 mA at 24V), with up to 210 lumens in white. The face is 2 inches across with an overall depth of about 0.75 inches, so it fits cleanly in headliners, cockpits, hardtops, and other overhead panels where you want a small footprint.\u003c\/p\u003e\u003cp\u003eThe housing is sealed to IP67 and is built for wet marine spaces where washdowns, salt spray, and vibration are part of normal life on board.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10-30V DC input for 12V and 24V electrical systems\u003c\/li\u003e\n\u003cli\u003eSpectrum RGBW output with a dedicated 5000K white mode\u003c\/li\u003e\n\u003cli\u003eRated 4W; approx. 290 mA at 12V and 160 mA at 24V\u003c\/li\u003e\n\u003cli\u003eUp to 210 lumens in white; CRI 70+\u003c\/li\u003e\n\u003cli\u003eIP67 sealed for wet locations and washdowns\u003c\/li\u003e\n\u003cli\u003eFlush-mount form factor with spring retention; shallow mounting depth (less than 1\/2 inch)\u003c\/li\u003e\n\u003cli\u003eApprox. 1.23 inch cutout; 2 inch outer diameter\u003c\/li\u003e\n\u003cli\u003eControl features supported: PLI, 3PD, and TTP\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the layout first, then cut the mounting hole and check for clearance behind the panel. The shallow mounting depth helps on thin headliners and tight hardtop cores, but you still want room for the light body and wiring to sit without being pinched.\u003c\/p\u003e\u003cp\u003eThe spring retention system holds the fixture from behind the mounting surface, giving you a finished look without exposed fasteners. This style works well in rows for even cabin lighting or as spaced accents under an overhang.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eConnect to a 10-30V DC supply. The built-in control behavior supports dimming and color changes through PLI and third-party dimmer compatibility (3PD) where used, along with timed toggled protocol (TTP) for switching modes through timed power toggles.\u003c\/p\u003e\u003cp\u003eOn refits, this can keep wiring simple when you want color control without running additional control lines through a headliner or hardtop.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis downlight suits overhead mounting in cabins, helm areas, hardtops, and covered cockpits. The small 2 inch trim helps it blend into modern interiors, and the IP67 sealing makes it reasonable for exposed areas that see spray or frequent cleaning.\u003c\/p\u003e\u003cp\u003eIt’s a good match for boaters who want normal white lighting most of the time, with the option to switch to color for evenings at anchor or for mood lighting around seating areas.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue when needed and wipe the lens and trim with mild soap and water. Avoid harsh solvents on the lens, and keep the sealing surfaces clean if you ever remove the light for access behind the panel.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268882329781,"sku":"QBP167721","price":146.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297951_qbp167721.png?v=1771540626"},{"product_id":"qbp167845","title":"Lumitec Orbit Flush Mount LED Down Light, 10-30V DC, IP67, White\/Red\/Blue, Black Finish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 112558 is a flush-mount LED downlight in a black housing that gives you three output colors: dimmable white, plus red and blue. It runs on 10-30 VDC, draws about 290mA on 12V systems and 160mA on 24V systems, and is sealed to an IP67 rating for wet areas on board.\u003c\/p\u003e\u003cp\u003eIt uses a 2 inch round trim with a shallow body behind the panel, which helps when headliner space is tight in cabins, hardtops, T-tops, and cockpit overhangs. White output is 5000K and rated around 210 lumens with a CRI of 70+.\u003c\/p\u003e\u003cp\u003eColor change and dimming are handled in the light, so you can control modes from a standard on\/off switch without adding extra control modules.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eThree output colors: white dimming, red non-dimming, blue non-dimming\u003c\/li\u003e\n\u003cli\u003e10-30 VDC input for 12V and 24V DC systems\u003c\/li\u003e\n\u003cli\u003eCurrent draw: 290mA at 12V DC, 160mA at 24V DC\u003c\/li\u003e\n\u003cli\u003eIP67 sealed construction for washdowns and exposed mounting locations\u003c\/li\u003e\n\u003cli\u003eCompact fit: 2 inch diameter with a 1.23 inch cutout and about 0.43 inch depth behind the mounting surface\u003c\/li\u003e\n\u003cli\u003eTimed Toggle Protocol (TTP) control for color change and dimming from a standard SPST switch\u003c\/li\u003e\n\u003cli\u003eThird Party Dimmer Compatibility (3PD): Yes\u003c\/li\u003e\n\u003cli\u003eCE certified, UL certified: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003ePlan the cutout before drilling, especially in thin headliners or cored panels. The small cutout and shallow behind-panel depth make it easier to place over ribs, wiring chases, and tight overhead cavities.\u003c\/p\u003e\u003cp\u003eWire it to your boat’s DC supply (10-30 VDC). The light is polarity sensitive, so keep negative and positive consistent across all fixtures on the circuit to avoid troubleshooting later.\u003c\/p\u003e\u003cp\u003eThe sealed build works well in damp spaces like cockpits and hardtops, but it is not intended to be permanently mounted underwater.\u003c\/p\u003e\u003ch6\u003eControl and on-board use\u003c\/h6\u003e\u003cp\u003eWith Timed Toggle Protocol (TTP), a quick off\/on toggle cycles between white, red, and blue. When the light is in white mode, the output ramps up on power-up, letting you lock in a dim level with another quick toggle.\u003c\/p\u003e\u003cp\u003eThis setup fits boats that want normal task lighting in white, plus night-friendly red or blue, while keeping wiring simple on a single switched circuit.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eIf you are installing multiple downlights on one switch, size wiring and circuit protection for the combined load. At full output, each fixture draws about 0.29A on 12V and 0.16A on 24V.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268882985141,"sku":"QBP167845","price":127.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297956_qbp167845.png?v=1771540628"},{"product_id":"qbp431586","title":"Lumitec NevisLT LED Engine Room Light, Ignition Protected, 10-30V, 1000 lm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101296 is a high-output LED engine room and utility light that throws 1000 lumens of white light across a 180-degree spread. It runs on 10 to 30 VDC and is sealed to an IP67 rating for bilge splash, washdowns, and the damp air that lives in lockers and machinery spaces.\u003c\/p\u003e\u003cp\u003eThe housing is a compact 5 in wide, 2.5 in high, and 0.63 in deep, so it fits where longer strip lights do not. Light color is 5000K with a CRI of 70+, which helps when you are tracing wire colors, reading labels, or spotting leaks.\u003c\/p\u003e\u003cp\u003eIt is ignition protected for installation in mechanical spaces and compartments, including gasoline engine areas. Power draw is about 1.3A on a 12V system and 600mA on a 24V system.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1000 integrating-sphere tested lumens with a 180-degree beam to light up wide, hard-to-reach corners\u003c\/li\u003e\n\u003cli\u003e10 to 30 VDC input for common 12V and 24V onboard systems\u003c\/li\u003e\n\u003cli\u003eIP67 sealed enclosure for wet compartments and routine washdowns\u003c\/li\u003e\n\u003cli\u003eIgnition protected for use in mechanical spaces and gasoline engine compartments\u003c\/li\u003e\n\u003cli\u003e5000K white output with CRI 70+ for clearer visibility when servicing equipment\u003c\/li\u003e\n\u003cli\u003eCompact footprint: 5 in x 2.5 in face and 0.63 in depth\u003c\/li\u003e\n\u003cli\u003eWorks with most PWM LED dimmers for installations that want light level control from the circuit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNevisLT light fixture\u003c\/li\u003e\n\u003cli\u003e#6 self-tapping mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the light to a flat surface using the supplied screws, and plan your wire routing before drilling. The wiring can pass through a wire exit behind the fixture, or it can be run along the mounting surface if that suits your installation.\u003c\/p\u003e\u003cp\u003eThe unit can get warm during normal use. Avoid placing it in a tight pocket that blocks airflow, since restricted ventilation can trigger a thermal reduction or shutdown until it cools.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eConnect to DC power with correct polarity, since the device is polarity sensitive. Protect the circuit with an appropriately sized fuse or breaker, and size wire gauge for the run length and load, especially when multiple lights share one circuit.\u003c\/p\u003e\u003cp\u003eFor engine rooms and other damp spaces, sealed wire-to-wire connections help prevent corrosion at the splice point.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe face measures 5.00 in by 2.50 in, with mounting hole centers spaced about 4.37 in (lengthwise) and 1.88 in (heightwise). With a 0.63 in depth, it works well under deck plates, inside lazarettes, under gunwales, and on bulkheads where clearance is limited.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis light is a solid match for owners who need a bright service light for filters, pumps, strainers, and electrical panels in cramped compartments. It also works well in storage lockers and utility spaces where a wide beam helps reduce shadows.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eSince the housing is sealed, routine care is mostly a wipe-down and a quick check that wiring, splices, and fasteners stay tight after seasonal vibration and heat cycles.\u003c\/p\u003e\u003ch6\u003eSafety and compliance\u003c\/h6\u003e\u003cp\u003eThis product carries a California Proposition 65 warning for cancer and reproductive harm.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268887769269,"sku":"QBP431586","price":173.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298187_qbp431586.jpg?v=1771540646"},{"product_id":"qbp184577","title":"Lumitec GAI2 Spectrum LED Positionable Light, Heavy-Duty Base, White Housing, RGBW, 10-30V DC, IP67, 340 lm, PLI Enabled","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 111831 is a GAI2 Spectrum positionable utility light with a heavy-duty base and a white housing, with full-color RGBW output plus a 5000K white channel.\u003c\/p\u003e\u003cp\u003eIt runs on 10-30V DC for 12V and 24V systems, draws about 430 mA at 12V (250 mA at 24V), and is rated 6 W with up to 340 lumens and a CRI of 70+. The housing is sealed to an IP67 rating and is specified for -31°F to 131°F (-35°C to 55°C), so it holds up in wet areas where spray, washdowns, and vibration are part of the routine.\u003c\/p\u003e\u003cp\u003eThe adjustable head lets you put light where you need it in a berth, nav station, cockpit, or workbench area without relocating the fixture. This makes sense for owners who want one light that covers task lighting and color scenes on the same circuit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSpectrum RGBW output with a 5000K white channel for task lighting and color effects\u003c\/li\u003e\n\u003cli\u003eUp to 340 lumens at 6 W for light that stays bright and focused\u003c\/li\u003e\n\u003cli\u003e10-30V DC input supports both 12V and 24V onboard electrical systems\u003c\/li\u003e\n\u003cli\u003eApproximate draw of 430 mA at 12V and 250 mA at 24V for circuit planning\u003c\/li\u003e\n\u003cli\u003eIP67 sealed housing for exposed mounting locations and routine washdowns\u003c\/li\u003e\n\u003cli\u003eTimed Toggled Protocol (TTP) built in for dimming and color control using a standard on-off switch\u003c\/li\u003e\n\u003cli\u003eThird Party Dimmer Compatibility (3PD) for use with many external dimmers on the power feed\u003c\/li\u003e\n\u003cli\u003ePLI enabled for integration with Lumitec digital lighting control systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis is a surface-mount fixture that fastens to a mounting plate and then locks in place with a twist, which helps keep the base tight in high-vibration spots. Plan a wire pass-through behind the base and leave enough slack so the head can articulate without tugging on the conductors.\u003c\/p\u003e\u003cp\u003eFor fit checks, the fixture footprint is about 2.53 in (6.42 cm) in diameter. Carefully seal any penetrations when mounting on deckhouse panels or in areas that see spray, and route wiring with drip loops where water may run.\u003c\/p\u003e\u003ch6\u003eElectrical and control notes\u003c\/h6\u003e\u003cp\u003eWire it like a standard two-wire DC light on a switched circuit, and size the fuse and wire gauge for the load and run length. If you are using external dimming or a lighting control module, confirm the control method matches TTP, 3PD, or PLI features in your system layout before you button up the panels.\u003c\/p\u003e\u003ch6\u003eRegulatory notice\u003c\/h6\u003e\u003cp\u003eThis product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268888391861,"sku":"QBP184577","price":298.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298193_qbp184577.jpg?v=1771540648"},{"product_id":"qbp128149","title":"Lumitec GAI2 LED Positionable Light, Heavy-Duty Base, Warm White, Dimmable, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 111803 is a GAI2 positionable utility light with a heavy-duty base and warm white dimming in a white housing. It runs on 10-30V DC for 12V and 24V systems, is rated at 6W, and outputs warm white light at 3000K with a 90+ CRI for comfortable, accurate visibility on board.\u003c\/p\u003e\u003cp\u003eBecause the body is sealed to an IP67 rating and is specified for temperatures from -31F (-35C) to 131F (55C), it fits well in cabins, cockpits, and damp compartments where humidity and occasional spray are part of life. The footprint stays manageable, with a diameter of about 2.53 inches, so it is easier to place on a headliner, bulkhead, or inside a locker without crowding nearby hardware.\u003c\/p\u003e\u003cp\u003eThis light makes the most sense for boaters who want a focused beam they can aim, then dim down for night use, without giving up the sealing and mounting strength needed for a vibrating, saltwater environment.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10-30V DC input for common 12V and 24V onboard power\u003c\/li\u003e\n\u003cli\u003eWarm white 3000K output with 90+ CRI for clear chart reading, label work, and night-friendly cabin lighting\u003c\/li\u003e\n\u003cli\u003eIP67 sealed construction for humid spaces and washdown-prone mounting locations\u003c\/li\u003e\n\u003cli\u003eHeavy-duty, machined aluminum base for a mount that stays tight on thin liners and high-vibration surfaces\u003c\/li\u003e\n\u003cli\u003eTimed Toggled Protocol (TTP) support plus third-party dimmer compatibility (3PD) for flexible dimming integration\u003c\/li\u003e\n\u003cli\u003eMounting template uses a 0.375 inch (3\/8 inch) center wiring hole and two #6 mounting screws\u003c\/li\u003e\n\u003cli\u003eColor Match Commitment helps multiple fixtures stay visually consistent when installed together\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePick a mounting spot where the head can swing and hold its aim without hitting trim, cabinet doors, or grab rails. Installation uses a bracket-style mount: the base fastens with two screws and a 3\/8 inch center hole for the wiring, then the fixture twists onto the bracket until it snaps into place.\u003c\/p\u003e\u003cp\u003ePlan for a clean wire run behind the panel and protect the circuit with a properly sized fuse. The built-in anti-rotation stop lets you aim the light through most of a full turn while helping prevent the power leads from being twisted up over time.\u003c\/p\u003e\u003ch6\u003eElectrical and dimming control\u003c\/h6\u003e\u003cp\u003eWire it like a standard two-wire DC light on a switched positive feed. With TTP dimming, the light ramps up when powered and a quick off-on toggle during the ramp holds the brightness level, which works well at a berth or nav station when you want dimming without adding an external control module.\u003c\/p\u003e\u003cp\u003eThe unit is also PLI-enabled, allowing compatible digital switching systems to send control commands over the same two power wires. If your boat already has a dimmer module in place, third-party dimmer compatibility can make it easier to tie into an existing dimming circuit.\u003c\/p\u003e\u003ch6\u003eUse and placement on board\u003c\/h6\u003e\u003cp\u003eWarm white output works well in sleeping areas and salons where you want light that feels natural at night. In a cockpit, utility bay, or workbench area, the adjustable head helps you put light right on a winch, breaker panel, or project without lighting up the whole space.\u003c\/p\u003e\u003cp\u003eWhen you are installing several lights on the same circuit, consistent color across fixtures helps the interior look uniform rather than patchy from one location to the next.\u003c\/p\u003e\u003ch6\u003eSafety note\u003c\/h6\u003e\u003cp\u003eThis product carries a California Proposition 65 warning.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268888719541,"sku":"QBP128149","price":309.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298198_qbp128149.jpg?v=1771540651"},{"product_id":"qbp507108","title":"Lumitec Orbit LED Down Light, White Housing, White\/Red Light, Dimmable, 10-30V DC, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 112522 is an Orbit flush-mount LED down light with white output that dims and a red mode, finished in a white housing for clean overhead installs. It runs on 10 to 30 VDC and is fully sealed to an IP67 rating for damp cabins, cockpits, and hardtop or flybridge ceilings.\u003c\/p\u003e\u003cp\u003eFit is straightforward in tight headliners and fiberglass panels: the cutout is 1.23 in (31.2 mm), the bezel is 1.99 in (50.5 mm) across, and the mounting depth is about 0.43 in (10.9 mm) behind the surface. Power draw is 220 mA at 12 V and 110 mA at 24 V, which helps when you are planning circuits with multiple lights.\u003c\/p\u003e\u003cp\u003eControl stays simple. The light works from a normal on and off SPST switch, with dimming handled by a quick off-on toggle during the brightness ramp, then color changes after dimming is set. An off time of about 2 seconds resets it back to white the next time it is switched on.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWhite housing Orbit down light with white output that dims plus a red mode for low-glare nighttime use\u003c\/li\u003e\n\u003cli\u003e10 to 30 VDC operation with polarity-sensitive DC wiring\u003c\/li\u003e\n\u003cli\u003eDraws 220 mA at 12 V and 110 mA at 24 V for easy circuit planning\u003c\/li\u003e\n\u003cli\u003eIP67 sealed for interior or exterior mounting in washdown-prone areas (not for permanent underwater mounting)\u003c\/li\u003e\n\u003cli\u003eShallow install with about 0.43 in (10.9 mm) mounting depth and a 1.23 in (31.2 mm) cutout\u003c\/li\u003e\n\u003cli\u003eTwist-lock style mount with a separate mounting plate, leaving no exposed fasteners on the finished surface\u003c\/li\u003e\n\u003cli\u003eDimming and mode changes from a standard SPST switch, no external control module required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMake the 1.23 in (31.2 mm) cutout and fasten the mounting plate to the surface, then insert the light body and rotate until it clicks into place. The bezel covers the cutout and finishes at 1.99 in (50.5 mm) diameter.\u003c\/p\u003e\u003cp\u003eConnect to a fused DC lighting circuit and verify polarity before final seating. Once powered, the light can be left at full output for task lighting, or dimmed down for a softer cabin look without changing switches.\u003c\/p\u003e\u003ch6\u003eOn-board use\u003c\/h6\u003e\u003cp\u003eThis is a solid fit for boat owners who want one small overhead light that can handle everyday white lighting and still switch to red when you are moving around at night. It works well in staterooms, salons, helm areas, and under hardtops where you want a sealed fixture and minimal mounting depth.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOrbit flush-mount down light\u003c\/li\u003e\n\u003cli\u003eMounting plate\u003c\/li\u003e\n\u003cli\u003eMounting screws\u003c\/li\u003e\n\u003cli\u003eYellow rubber installation tool\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eRegulatory notice\u003c\/h6\u003e\u003cp\u003eThis product carries a California Proposition 65 warning.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268892946613,"sku":"QBP507108","price":129.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298165_qbp507108.jpg?v=1771540665"},{"product_id":"qbp369002","title":"Lumitec Halo Flush Mount LED Down Light, White\/Blue Light Output, White Dimming, 10-30V DC, IP67, 1.25in Cutout, Brushed Aluminum Finish, USCG Ignition Protected","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 112801 is a flush-mount LED down light with a brushed aluminum finish and a two-color output (white with dimming plus blue) for cabins and weather-exposed overhead surfaces. It runs on 10-30V DC systems and is fully sealed to IP67, so it handles moisture and washdowns where standard interior lights fail.\u003c\/p\u003e\u003cp\u003eFit is straightforward in tight headliners and hard tops: it uses a 1.25 inch mounting hole, sits about 0.31 inch proud of the surface, and needs less than 1\/2 inch of clearance behind the mounting panel. The face is an exposed lens with a narrow bezel, which helps the beam spread wide instead of looking like a tiny spot.\u003c\/p\u003e\u003cp\u003eControl stays simple. Dimming and color changes are handled by toggling a standard on-off switch, so you can add it to an existing lighting circuit without extra modules or specialty switches.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo-color output: white (5000 K) with dimming plus blue.\u003c\/li\u003e\n\u003cli\u003eWorks on 10-30V DC systems; draws up to 0.58A at 12V or 0.32A at 24V.\u003c\/li\u003e\n\u003cli\u003eIP67 sealed for wet areas and washdowns; not intended for permanent underwater mounting.\u003c\/li\u003e\n\u003cli\u003eRequires a 1.25 inch mounting hole, with less than 1\/2 inch behind-panel clearance and about 0.31 inch above-surface profile.\u003c\/li\u003e\n\u003cli\u003eDimming and color selection are controlled from a standard SPST on-off switch by toggling power.\u003c\/li\u003e\n\u003cli\u003eHidden fasteners with a narrow bezel and exposed lens for a beam that spreads wide.\u003c\/li\u003e\n\u003cli\u003eUSCG ignition protected for use in gasoline engine spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush mount down light assembly\u003c\/li\u003e\n\u003cli\u003eMounting plate\u003c\/li\u003e\n\u003cli\u003eMounting screws\u003c\/li\u003e\n\u003cli\u003eYellow rubber installation tool\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eLay out the cutout using a printed template, then drill the center hole and the mounting screw holes. The mounting plate installs first, then the light body twists into place until it clicks. If the final twist is tight, the included rubber tool gives enough grip to seat it without marring the bezel.\u003c\/p\u003e\u003cp\u003eThe light may feel warm during operation, which is normal. Avoid mounting it to highly flammable or heat-sensitive materials, and keep it out of locations that stay submerged.\u003c\/p\u003e\u003ch6\u003eElectrical and switching control\u003c\/h6\u003e\u003cp\u003eWire it directly to the vessel’s DC system and protect the circuit with an appropriately sized fuse or breaker. Maximum draw per light is up to 580mA at 12V DC or 320mA at 24V DC, so size protection for the total load when multiple lights share a switch circuit.\u003c\/p\u003e\u003cp\u003eThis unit is polarity sensitive: connect the black wire to negative (ground) and the white or red wire to the positive feed. It can be controlled by a standard SPST switch. With 2-color dimmed operation, the white output ramps slowly; toggling the switch off and immediately back on locks the brightness. After the dimming stage, a quick off-on toggle changes colors. Leaving power off for about 2 seconds resets the light back to white on the next start.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis light is a good match when you want bright overhead white lighting for task work at the helm, in the galley, or in the cabin, plus blue for a low-key nighttime look without changing fixtures. It also works well in protected exterior ceilings and hard tops where spray, condensation, and vibration are part of normal use.\u003c\/p\u003e\u003ch6\u003eNotices\u003c\/h6\u003e\u003cp\u003eThis product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit P65Warnings.ca.gov.\u003c\/p\u003e\u003cp\u003eWarranty coverage is one year from the original purchase date.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268893470901,"sku":"QBP369002","price":153.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298169_qbp369002.jpg?v=1771540669"},{"product_id":"qbp678280","title":"Lumitec Halo Flush Mount LED Down Light, White\/Red Dimming, 10-30V DC, IP67, Brushed Finish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 112802 is a flush-mount LED Halo down light with a brushed housing that runs on 10 to 30 VDC and switches between dimmable white and dimmable red light. White output is 5000 K at 150 lumens, with a rated draw of 4 W.\u003c\/p\u003e\u003cp\u003eIt is fully sealed to an IP67 rating and certified ignition protected, so it fits well in real-world boat installs where spray, vibration, and occasional washdowns are part of the deal. The shallow mounting depth helps when you are working with thin headliners, hardtops, or tight overhead spaces.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDimmable white and dimmable red output in one fixture for task lighting and night-vision-friendly lighting\u003c\/li\u003e\n\u003cli\u003e10 to 30 VDC input for common 12 V and 24 V boat electrical systems\u003c\/li\u003e\n\u003cli\u003e150 lumens white output at 5000 K, 4 W rated\u003c\/li\u003e\n\u003cli\u003eCurrent draw: 300 mA at 12 VDC, 160 mA at 24 VDC\u003c\/li\u003e\n\u003cli\u003eIP67 compliant sealing for damp and exposed mounting locations (not intended for permanent underwater mounting)\u003c\/li\u003e\n\u003cli\u003eCertified ignition protected for use in appropriate gasoline spaces\u003c\/li\u003e\n\u003cli\u003eCompact footprint: 1.99 in (W) x 1.99 in (H) x 0.70 in (D)\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -35 to +55 C (-31 to +131 F)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHalo flush-mount down light\u003c\/li\u003e\n\u003cli\u003eComposite mounting plate\u003c\/li\u003e\n\u003cli\u003eMounting screws\u003c\/li\u003e\n\u003cli\u003eRubber installation tool\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis light uses a composite mounting plate and a twist-lock style engagement. After the cutout is prepared, the plate mounts to the surface, the wiring is connected, and the light body seats into the plate and locks with a turn until it clicks. The shallow depth makes it easier to place in overhead panels where you do not have much clearance behind the surface.\u003c\/p\u003e\u003ch6\u003eElectrical and control\u003c\/h6\u003e\u003cp\u003ePower it from a protected DC lighting circuit with an appropriately sized fuse or breaker. The light is polarity sensitive, so connect negative and positive exactly as marked on the leads. Control can be as simple as a standard SPST rocker or toggle switch.\u003c\/p\u003e\u003cp\u003eFor the dimmable white mode, the output ramps and you can lock the brightness by toggling power off and back on at the desired level. After the dim stage, a quick power toggle cycles the output to the alternate color, and turning the light off for a couple of seconds resets it back to white.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a practical choice for cabins, staterooms, helm stations, flybridges, and hardtops where you want one low-profile fixture to cover normal white light and a red mode for night runs or watch standing. It is a good match for boats running either 12 V or 24 V systems that want simple switching without adding extra control modules.\u003c\/p\u003e\u003ch6\u003eSafety information\u003c\/h6\u003e\u003cp\u003eThe fixture is fully sealed and suited to interior or exterior mounting locations, but it is not designed to be permanently mounted underwater. The light can get warm during operation, so avoid mounting to highly flammable or heat-sensitive substrates.\u003c\/p\u003e\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268893536437,"sku":"QBP678280","price":127.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298174_qbp678280.jpg?v=1771540672"},{"product_id":"qbp739751","title":"Lumitec Halo LED Downlight, Blue\/White Light, Dimming, IP67, 10-30V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 112821 is a flush-mount LED down light with blue output and a 5000K white mode that dims, built for 10 to 30VDC boat systems. White mode produces 150 lumens from a 4W draw, and the sealed housing is IP67 compliant for wet locations.\u003c\/p\u003e\u003cp\u003eIts shallow profile keeps the back of the fixture under 1\/2 in behind the panel, which helps in tight headliners and hard tops. The trim is finished in white and the light is certified ignition protected, so it can be used in spaces where fuel vapors may be present when installed correctly.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10 to 30VDC input for 12V and 24V nominal systems\u003c\/li\u003e\n\u003cli\u003eWhite and blue output, with dimming on white mode using a standard SPST switch\u003c\/li\u003e\n\u003cli\u003e150 lumens on white mode; 5000K CCT and 70+ CRI\u003c\/li\u003e\n\u003cli\u003e4W rated power draw; up to 300mA at 12VDC and 160mA at 24VDC\u003c\/li\u003e\n\u003cli\u003eFully sealed, IP67 compliant for washdowns and exposed mounting locations\u003c\/li\u003e\n\u003cli\u003eCertified ignition protected for installation where fuel vapors may be present\u003c\/li\u003e\n\u003cli\u003eShallow mounting depth under 1\/2 in behind the mounting surface\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 1.99 in x 1.99 in x 0.70 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMounting uses a screw-on plate and a twist-lock body. Cut the opening using the supplied template, secure the plate, connect to vessel DC power, then rotate the light until it clicks into the plate.\u003c\/p\u003e\u003cp\u003eThe light is polarity sensitive. Verify DC negative and DC positive before energizing, and fuse the circuit based on the total load of the lights on that switch.\u003c\/p\u003e\u003cp\u003eThe fixture is fully sealed for interior and exterior mounting, but it is not intended for permanent underwater installation.\u003c\/p\u003e\u003ch6\u003eSwitching and dimming control\u003c\/h6\u003e\u003cp\u003eThe built-in control works from a standard SPST on-off switch. Turn the switch off and back on quickly to move between white and blue.\u003c\/p\u003e\u003cp\u003eWhen the light is on white, the output ramps slowly. Turn the switch off and back on at the brightness you want to hold that dim level, then use another quick off-on cycle to switch to blue after dimming is set.\u003c\/p\u003e\u003ch6\u003eFit and on-board use\u003c\/h6\u003e\u003cp\u003eWith a small, square face and a low-profile mount, it fits well in cabins, salons, helm overhangs, and exterior hard tops where you want a flush look and no exposed fasteners.\u003c\/p\u003e\u003cp\u003eIt is a good match for boats that want white light for normal use and blue for night running or cockpit work, while keeping wiring simple on a single switch circuit. If you are replacing older halogen downlights and need to cover a larger existing opening, a retrofit adapter kit is available for holes from 1.875 in to 2.750 in.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHalo flush-mount down light with white finish and blue plus dimmable white output\u003c\/li\u003e\n\u003cli\u003eMounting screws\u003c\/li\u003e\n\u003cli\u003eYellow rubber installation tool\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eRegulatory notice\u003c\/h6\u003e\u003cp\u003eWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268893569205,"sku":"QBP739751","price":115.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298179_qbp739751.jpg?v=1771540674"},{"product_id":"qbp599227","title":"Lumitec Flush Mount Down Light Adapter Kit, For Halo \u0026 Orbit, Fits 1.875-2.750 in Holes, Clamp-In, No Exposed Fasteners","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101073 is an adapter kit for Halo and Orbit flush mount down lights that helps you retrofit into an older opening without patching or upsizing trim. It covers oversized cutouts from 1.875\" to 2.750\" in diameter, leaving a 3.00\" finished trim at the surface with about 0.72\" of depth behind the panel.\u003c\/p\u003e\u003cp\u003eIt uses a clamp-in style mount with no exposed fasteners, so the face stays clean and the backside of the panel also looks tidy when it is visible. This is the adapter only; the down light is sold separately.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRetrofit cover for oversized holes left by many older halogen dome and down light installs\u003c\/li\u003e\n\u003cli\u003eFits existing cutouts from 1.875\" to 2.750\" diameter\u003c\/li\u003e\n\u003cli\u003e3.00\" finished trim diameter with about 0.72\" depth behind the mounting surface\u003c\/li\u003e\n\u003cli\u003eClamp-in installation with no exposed fasteners on the face\u003c\/li\u003e\n\u003cli\u003eMade to pair with Lumitec Halo and Orbit flush mount down lights\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis adapter is intended for Lumitec Halo and Lumitec Orbit flush mount down lights. Measure the current cutout before ordering: openings smaller than 1.875\" will not accept the adapter as-is, and openings larger than 2.750\" can leave gaps that remain visible around the trim.\u003c\/p\u003e\u003cp\u003eIt is a practical choice for overhead panels, headliners, hardtops, and other common down light mounting spots where the old cutout is bigger than the new light’s footprint.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eAfter the old light is removed and the opening is cleaned up, the adapter clamps into the existing cutout. The new down light then installs through the adapter using its normal flush mount method, keeping the finished edge covered without adding visible screws on the trim face.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis kit is a good match for refits where you are moving from halogen to Halo or Orbit lighting in cabins, berths, heads, or cockpit overhead areas and want a clean look without fiberglass work. It also helps when you are standardizing light sizes across a boat and need one trim size to cover mixed legacy cutouts.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe the trim with fresh water and a mild soap solution as needed, especially after salt spray or washdowns. Avoid harsh solvents that can haze or dull finishes.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268893601973,"sku":"QBP599227","price":13.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298183_qbp599227.jpg?v=1771540676"},{"product_id":"qbp137713","title":"Lumitec Nevis LED Engine Room Light, 10-30V, IP67, Ignition Protected, Intrinsically Safe","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101070 is a low-profile LED engine room and utility light that runs on 10-30V DC and produces 530 lumens of cool white output at 6500K.\u003c\/p\u003e\u003cp\u003eIt is sealed to an IP67 rating and is ignition protected and intrinsically safe, which suits it for engine rooms, mechanical compartments, and other onboard spaces that see moisture, spray, and vibration. The beam spread approaches 180 degrees, helping light reach into corners and under equipment where narrow beams leave shadows.\u003c\/p\u003e\u003cp\u003eOverall size is 5.00 in wide, 2.5 in tall, and 0.63 in deep, so it fits well where mounting depth is limited.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10-30V DC input range, 11W draw (about 900 mA at 12V and 450 mA at 24V)\u003c\/li\u003e\n\u003cli\u003eCool white 6500K output with CRI 70+ and 530 lumens\u003c\/li\u003e\n\u003cli\u003eIP67 sealed against dust and temporary immersion\u003c\/li\u003e\n\u003cli\u003eIgnition protected and intrinsically safe for use in mechanical spaces\u003c\/li\u003e\n\u003cli\u003eWide flood beam that approaches 180 degrees for even compartment coverage\u003c\/li\u003e\n\u003cli\u003eLow-profile housing: 5.00 in (W) x 2.5 in (H) x 0.63 in (D)\u003c\/li\u003e\n\u003cli\u003eBuilt-in dimming behavior using a brief power off\/on during startup to set light level\u003c\/li\u003e\n\u003cli\u003ePolarity sensitive DC wiring\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -35 to +55 C (-31 to +131 F)\u003c\/li\u003e\n\u003cli\u003eBrushed finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNevis high intensity engine room light\u003c\/li\u003e\n\u003cli\u003eMounting hardware (#6 self-tapping screws)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis is a surface-mount fixture. Pick a location that gives the light a clear path across the space, then route the power leads either through the wire exit behind the light or along the mounting surface, depending on how you want to dress the wiring.\u003c\/p\u003e\u003cp\u003eThe housing can get warm during normal use. Avoid enclosed pockets that restrict airflow around the fixture, and leave space for air circulation if it will be run at higher output for extended periods.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eConnect to a 10-30V DC circuit and follow ABYC-style practices for wire sizing and overcurrent protection. Because the unit is polarity sensitive, confirm positive and negative before finalizing the connection.\u003c\/p\u003e\u003cp\u003eIn engine rooms and wet lockers, sealed wire-to-wire connections such as adhesive-lined butt connectors help keep moisture and oil vapor out of the splice.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis light works well as a service light for engine rooms, generator compartments, and mechanical lockers where you need an even spread over filters, belts, and valves. The IP67 seal also suits it for wet storage areas that get washdowns.\u003c\/p\u003e\u003cp\u003eIt is a strong fit for boats with either 12V or 24V systems where you want wide-beam white light and a fixture that stays low profile against the mounting surface.\u003c\/p\u003e\u003ch6\u003eSafety notice\u003c\/h6\u003e\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268895830197,"sku":"QBP137713","price":208.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298154_qbp137713.jpg?v=1771540695"},{"product_id":"qbp509933","title":"Lumitec Orbit Flush Mount LED Down Light, White\/Blue Dimming, Brushed Finish, 10-30V, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 112501 is an Orbit flush-mount LED downlight with a brushed finish that switches between white and blue with dimming control built into the light. It runs on 10 to 30 VDC, pulls 300 mA at 12 VDC (160 mA at 24 VDC), and is sealed to an IP67 level for spray and washdowns.\u003c\/p\u003e\u003cp\u003eWhite output is 5000K with a CRI of 70+ and up to 150 lumens, which is a good fit for general overhead lighting in cabins and covered exterior areas. The face is 1.99 in round with an overall depth of 0.72 in, so it works well where headliner space is tight.\u003c\/p\u003e\u003cp\u003eThis model is certified ignition protected, which is useful when lighting ends up in enclosed spaces where fuel vapors could be present.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo-color output: white and blue, with dimming controlled at the light\u003c\/li\u003e\n\u003cli\u003e10 to 30 VDC input for 12V and 24V systems\u003c\/li\u003e\n\u003cli\u003eRated 4 W with 300 mA draw at 12 VDC and 160 mA at 24 VDC\u003c\/li\u003e\n\u003cli\u003eIP67 sealed construction for wet locations and routine washdowns\u003c\/li\u003e\n\u003cli\u003e5000K white light, CRI 70+, up to 150 lumens (white)\u003c\/li\u003e\n\u003cli\u003eShallow install: 1.99 in diameter face and 0.72 in overall depth\u003c\/li\u003e\n\u003cli\u003eCertified ignition protected\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -35 C to +55 C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush-mount down light\u003c\/li\u003e\n\u003cli\u003eMounting plate\u003c\/li\u003e\n\u003cli\u003eMounting screws\u003c\/li\u003e\n\u003cli\u003eYellow rubber installation tool\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis light uses a 1.23 in cutout and a shallow mounting depth (about 7\/16 in), which helps when you are working with thin headliners, hardtops, or overhead panels. If you are replacing older dome lights, double-check the hole size and make sure you have room for the 0.72 in body depth behind the surface.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eMounting is straightforward: fasten the mounting plate to the surface, connect the light to your DC supply, then seat the light and twist until it locks. The circuit is polarity sensitive, so confirm the positive and negative leads before powering up.\u003c\/p\u003e\u003cp\u003eControl can be handled from a simple SPST toggle or rocker switch. Color changes and dimming are done by timed power cycling at the switch, so you do not need a separate control module or additional wire runs. For circuit protection, size the fuse or breaker for the load, and allow up to 580 mA at 12 VDC or 320 mA at 24 VDC per light when planning multi-light circuits.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eWhite mode works well for day-to-day tasks at the helm, in a galley, or in passageways, while blue is a common choice for keeping night vision and keeping glare down in a cockpit. It is a good match for boats that need a small, shallow downlight that can live in wet areas and still run cleanly on either 12V or 24V.\u003c\/p\u003e\u003ch6\u003eImportant safety information\u003c\/h6\u003e\u003cp\u003eWarning: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268896420021,"sku":"QBP509933","price":135.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298157_qbp509933.jpg?v=1771540698"},{"product_id":"qbp561295","title":"Lumitec Orbit Flush Mount LED Downlight, Blue\/White Dimming, White Finish, 10-30V, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 112521 is a flush-mount LED down light with a white finish and two-color output (white and blue), with onboard dimming for 10-30 VDC systems.\u003c\/p\u003e\u003cp\u003eWhite mode is 5000 K at 4 W with a CRI of 70+, and current draw is 300 mA at 12 VDC or 160 mA at 24 VDC. The housing is IP67 sealed and ignition protected, and the fixture is about 1.99 in wide with 0.72 in overall depth while keeping required mounting depth under 1\/2 in for tight panels.\u003c\/p\u003e\u003cp\u003eIt fits cleanly into cabins, salons, staterooms, helm areas, and overhead mounting under a flybridge or hard top. It is suitable for interior and exterior mounting, but it is not intended for permanent underwater use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo-color output: dimmable white plus blue for low-glare night lighting\u003c\/li\u003e\n\u003cli\u003e10-30 VDC input for 12 V and 24 V boats\u003c\/li\u003e\n\u003cli\u003e5000 K white light with CRI 70+\u003c\/li\u003e\n\u003cli\u003e4 W draw, 300 mA at 12 VDC or 160 mA at 24 VDC\u003c\/li\u003e\n\u003cli\u003eIP67 sealed for damp areas and washdowns\u003c\/li\u003e\n\u003cli\u003eIgnition protected for installations where ignition protection is required\u003c\/li\u003e\n\u003cli\u003eShallow install: required mounting depth under 1\/2 in; overall depth about 0.72 in\u003c\/li\u003e\n\u003cli\u003eApprox. 1.99 in overall size for a small footprint\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush-mount down light\u003c\/li\u003e\n\u003cli\u003eMounting plate\u003c\/li\u003e\n\u003cli\u003eMounting screws\u003c\/li\u003e\n\u003cli\u003eYellow rubber installation tool\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eUse the provided mounting template to lay out the cutout and screw holes, then secure the mounting plate with the supplied screws. The light body seats into the plate and locks with a twist until it clicks; the included rubber tool can help if you need extra grip to fully seat it.\u003c\/p\u003e\u003cp\u003eLike most high-output LED fixtures, it can get warm during operation. That is normal for fiberglass and wood mounting surfaces, but it should not be mounted on highly flammable materials or surfaces that cannot tolerate heat.\u003c\/p\u003e\u003ch6\u003eElectrical and switching\u003c\/h6\u003e\u003cp\u003eThis light connects directly to the boat’s DC system and is polarity sensitive: black goes to negative (ground), and the white or red lead goes to the positive supply. Protect the circuit with an appropriately sized fuse or breaker based on the total load of all lights on that run.\u003c\/p\u003e\u003cp\u003eControl works with a standard SPST on-off switch. In white mode, brightness ramps slowly; turning the switch off and back on locks the output at the level you want. A quick off-on toggle after the dimming stage changes to the alternate color, and leaving the switch off for about 2 seconds resets the light to white. Multiple lights can share a single switch circuit, and an off period of about 3 seconds resets a group if colors get out of sync.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eConfirm clearance behind the mounting surface and check the cutout against the supplied template before drilling. This model is a good match when you want a small, flush overhead light that runs on either 12 V or 24 V, with blue available for night runs and dimmed white for cabin comfort.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt film off after washdowns and wipe the lens with a soft cloth. Avoid harsh solvents on the lens and trim so the finish and sealing surfaces stay in good shape.\u003c\/p\u003e\u003ch6\u003eRegulatory notice\u003c\/h6\u003e\u003cp\u003eThis product carries a California Proposition 65 warning. For details, refer to P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268897337525,"sku":"QBP561295","price":127.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298161_qbp561295.jpg?v=1771540700"},{"product_id":"qbp958578","title":"Lumitec Pico C4 Expansion Module, For Poco System, TTP Switch Control, Third-Party RGB\/RGBW, 10-30V, IP67, 4-Channel, 2.5A Max","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101609 is a Pico C4 expansion module that lets a Poco Digital Lighting Control system run third-party RGB and RGBW lighting from the same controls used for your onboard Lumitec scenes.\u003c\/p\u003e\u003cp\u003eIt accepts 10 to 30 VDC for 12V and 24V boats, is IP67 rated for splash and washdown environments, and provides four channels (RGB plus an optional white channel) with up to 2.5A per channel.\u003c\/p\u003e\u003cp\u003eOn boats without a Poco controller, it can still operate from a standard SPST on-off switch using TTP toggle commands, giving you color and brightness control without adding a dedicated keypad.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eExtends Poco control to non-PLI RGB or RGBW accessories so mixed-brand lighting can live on one system.\u003c\/li\u003e\n\u003cli\u003e10 to 30 VDC input range for common 12V and 24V DC electrical systems.\u003c\/li\u003e\n\u003cli\u003eFour-channel output for RGB plus optional white (leave the white lead disconnected for RGB-only loads).\u003c\/li\u003e\n\u003cli\u003eUp to 2.5A per channel capacity for driving RGB or RGBW accessories within the module’s limits.\u003c\/li\u003e\n\u003cli\u003eIP67 rating for installations where spray and washdowns are part of normal use.\u003c\/li\u003e\n\u003cli\u003eCE certified.\u003c\/li\u003e\n\u003cli\u003eStatus LED feedback for power, output state, received messages, and fault indications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the module in a spot that stays protected and is easy to reach for service, then feed it from a properly fused DC supply using the two-wire power input (red positive, black negative). The RGBW output is a 5-wire harness with a shared positive lead and individual negative leads for red, green, blue, and optional white, which makes it straightforward to tie into accessories that follow that wiring scheme.\u003c\/p\u003e\u003cp\u003eIf you are running RGB-only accessories, leave the white output wire unconnected. For best results on a boat that sees water and vibration, keep splices out of low points, secure the harness for strain relief, and seal terminations with marine-grade connectors and heat-shrink.\u003c\/p\u003e\u003ch6\u003eControl and system integration\u003c\/h6\u003e\u003cp\u003eWhen installed with a Poco system, the Pico C4 responds to PLI commands on the supply line for quick changes to color and dimming from supported interfaces. In toggle-switch mode, brief off-on power toggles step through control functions, including a 3-second brightness ramp on startup and a color cycle mode that runs through available colors in about 20 seconds, with a reset after the input power is left off for more than 4 seconds.\u003c\/p\u003e\u003cp\u003eThe status LED also helps with troubleshooting by indicating fault conditions such as over-temperature, over or under voltage, or over-current.\u003c\/p\u003e\u003ch6\u003eEnvironmental and physical fit\u003c\/h6\u003e\u003cp\u003eThe housing is about 1.9 in wide, 2.6 in tall, and 0.52 in deep, with an operating range of -31F to 131F (-35C to 55C). That fits well behind the helm, inside consoles, and in other tight spaces where you want the module close to the accessory wiring, while still keeping it away from standing water.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis module makes sense when you want third-party RGB accents such as lighted speakers, cupholders, or signage to match the rest of your Lumitec lighting colors. It also works well on smaller boats that want multi-color control from a simple on-off switch, without dedicating helm space to additional controllers.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268925649077,"sku":"QBP958578","price":226.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298217_qbp958578.jpg?v=1771540881"},{"product_id":"qbp994148","title":"Lumitec Aurora Flush Mount LED Dome Light, White\/Red Light, Dimming, Bezel Switch, IP67, 10-30V, White Housing, 4in","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101605 is an Aurora flush-mount LED dome light that switches between white and red output with dimming from the built-in bezel control. It runs on 10-30 VDC and is sealed to an IP67 rating, so it can handle damp cabins, spray, and routine washdowns. White mode output is 180 lumens at 5000K, with a rated draw of 345 mA at 12V (210 mA at 24V).\u003c\/p\u003e\u003cp\u003eThe 4.00 in (10.16 cm) face and 0.73 in (1.84 cm) depth work well where headliner clearance is tight, including berth areas, pilothouses, console interiors, and under hardtops. Red mode is useful when you want light that keeps night vision intact for early departures, dock checks, or running in the dark.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDual-color output (white and red) with dimming built into the bezel control\u003c\/li\u003e\n\u003cli\u003e10-30 VDC input for 12V and 24V DC systems\u003c\/li\u003e\n\u003cli\u003eIP67-rated sealed light for wet environments and exposed mounting spots\u003c\/li\u003e\n\u003cli\u003eWhite output: 180 lumens at 5000K\u003c\/li\u003e\n\u003cli\u003ePower draw: 345 mA at 12V, 210 mA at 24V (4 W rated)\u003c\/li\u003e\n\u003cli\u003eFlush-mount footprint with 4.00 in (10.16 cm) diameter and 0.73 in (1.84 cm) depth\u003c\/li\u003e\n\u003cli\u003eSimple 2-wire hookup\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -31 to 131 F (-35 to 55 C)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis light installs as a low-profile flush mount and only needs a 2-wire feed from your boat lighting circuit. Plan for a 1\/2 in wiring pass-through and use marine-grade connections with heat-shrink sealing, especially in damp overhead locations.\u003c\/p\u003e\u003cp\u003eFor outdoor or semi-exposed installs, bedding the fasteners and any penetrations helps keep water out of the core and headliner. The shallow body depth makes it a good fit in hardtops and cabin liners where you do not have much space behind the panel.\u003c\/p\u003e\u003ch6\u003eElectrical and control notes\u003c\/h6\u003e\u003cp\u003eColor selection and dimming are handled at the bezel, so the light is typically run from a standard switched supply rather than an external dimmer module. If your boat has existing dome light wiring, this is a straightforward swap as long as the circuit is within the 10-30 VDC range.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for cruisers and fishing boats that want one fixture to cover normal cabin lighting and a red night mode without adding separate switches. It is commonly used over berths, in heads, under T-tops, in pilothouses, and inside consoles where you want a clean flush look.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue when needed and wipe with mild soap and water. Avoid harsh solvents on the lens and finish, and check wiring connections periodically in high-vibration areas.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268926075061,"sku":"QBP994148","price":159.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298220_qbp994148.jpg?v=1771540884"},{"product_id":"qbp884805","title":"Lumitec Aurora LED Flush Mount Dome Light, White\/Blue Output, IP67, Dimming, Bezel Switch","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101606 is a flush-mount LED dome light that runs on 10-30 VDC and lets you switch between white and blue output by rotating the bezel.\u003c\/p\u003e\u003cp\u003eIt is sealed to an IP67 level, so it can be used in cabins or in exposed areas that see spray and routine washdowns. Power draw is about 290 mA at 12 VDC and about 160 mA at 24 VDC, which helps when you are planning circuit protection and how many lights to put on one run.\u003c\/p\u003e\u003cp\u003eFor layout and clearance, the face is about 4 inches in diameter and the light sits about 0.7 inches proud of the mounting surface.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSelect white or blue output by rotating the bezel; rotate and hold to dim the active color.\u003c\/li\u003e\n\u003cli\u003e10-30 VDC input for common 12V and 24V onboard power.\u003c\/li\u003e\n\u003cli\u003eApproximate current draw: 290 mA at 12 VDC and 160 mA at 24 VDC.\u003c\/li\u003e\n\u003cli\u003eIP67 sealed construction for wet marine environments and washdowns.\u003c\/li\u003e\n\u003cli\u003eFlush-mount profile with about a 4 inch diameter face and about a 0.7 inch height.\u003c\/li\u003e\n\u003cli\u003eSimple 2-wire hookup for straightforward installs and retrofits.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eOn-board operation\u003c\/h6\u003e\u003cp\u003eRotate the bezel about 30 degrees counterclockwise to bring up white light. Rotate a bit farther and hold to dim, then release when the level looks right. Rotate clockwise to access the blue output and dim it the same way.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eConnect the two supply wires to a fused DC circuit and plan fuse sizing based on the total number of lights on that run. In multi-light circuits, add up the current draw for each fixture so the protection matches the load.\u003c\/p\u003e\u003cp\u003eMount it where you can comfortably reach the bezel, since color selection and dimming happen at the light. After mounting, support the wiring behind the panel so vibration does not work the connections loose over time.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis style of dome light works well for headliners, hardtops, berth overheads, consoles, lockers, and other overhead or under-surface locations where you want broad light without a bulky housing. The blue mode is useful when you want enough light to move around without the harsh glare that can ruin night vision.\u003c\/p\u003e\u003cp\u003eBefore cutting or committing to a location, confirm you have room for the 4 inch face and the roughly 0.7 inch profile, plus clearance behind the mounting surface for the wire connections.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue when you can and wipe the lens with mild soap and water. Avoid abrasive pads or strong solvents that can haze the window and make the light look uneven.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268926304437,"sku":"QBP884805","price":157.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298225_qbp884805.jpg?v=1771540887"},{"product_id":"qbp993876","title":"Lumitec Corsica Inset LED Flood Light, Spectrum Halo, 10-30VDC, 1200 lm, IP67, RGBW, 5000K","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101611 is an inset LED spreader and flood light with Spectrum Halo lighting, built to be sculpted into a hardtop, wheelhouse, or arch for a clean, integrated install. It runs on 10-30 VDC and puts out over 1,200 lumens, giving you working light for the cockpit, aft deck, and other spreader-style mounting locations where you want wide coverage without a bulky fixture.\u003c\/p\u003e\u003cp\u003eSpectrum Halo adds a dimmable colored halo around the output, with full WRGB control and a 5000 CCT white channel for a natural-looking work light. TTP and PLI features let it be controlled from a normal on and off switch, and it also works with the Poco Digital Lighting Control System for more detailed lighting control. It carries a 3-year warranty and is made in the USA.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eInset form factor that can be sculpted into hardtops, wheelhouses, and arches for a flush look\u003c\/li\u003e\n\u003cli\u003eOver 1,200 lumens for spreader and flood-style deck illumination\u003c\/li\u003e\n\u003cli\u003eSpectrum Halo lighting with a dimmable colored halo glow\u003c\/li\u003e\n\u003cli\u003eFull WRGB output with a 5000 CCT white channel\u003c\/li\u003e\n\u003cli\u003e10-30 VDC input for common 12V and 24V boat systems\u003c\/li\u003e\n\u003cli\u003eCurrent draw: 1A at 12V and 0.5A at 24V\u003c\/li\u003e\n\u003cli\u003eTTP and PLI enabled for control from a standard on and off switch; compatible with Poco Digital Lighting Control System\u003c\/li\u003e\n\u003cli\u003eCompact overall size: 5.76 in W x 2.8 in H x 4.1 in D\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis light is intended for a molded-in or sculpted installation where the housing sits recessed into the mounting surface. Plan for backside access so you can route the cable, support the fixture, and keep connections protected from spray.\u003c\/p\u003e\u003cp\u003eUse the overall depth (4.1 in) as a reality check for tight hardtops and arches, and confirm you have room behind the mounting face before committing to the location. On open boats, choose a spot that avoids direct line-of-sight glare from the helm while still lighting the working area below.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eWith a 10-30 VDC operating range, it fits both 12V and 24V DC systems without needing a converter. The current draw is modest for its output, but it is still worth planning the circuit so voltage drop stays under control on longer wire runs to hardtops and towers.\u003c\/p\u003e\u003cp\u003eTTP and PLI control means the light can be operated using a standard switch, which is useful when you want simple helm control without adding extra panels. For installations that already use Lumitec digital lighting, Poco integration keeps lighting control consistent across zones and scenes.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis style of inset spreader light makes sense on boats where you want high-output working light but prefer the fixture to visually disappear into the hardtop or arch. It suits anglers setting up lines after dark, cruisers loading gear at the dock, and crews that want functional deck lighting with a controlled color accent at night.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the fixture after saltwater use and keep the lens area clean so output stays consistent. When wiring lives in a hardtop or arch, periodically check that connections remain dry and strain relief is intact, especially after heavy vibration or long offshore runs.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268926894261,"sku":"QBP993876","price":273.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298230_qbp993876.jpg?v=1771540890"},{"product_id":"qbp522128","title":"Lumitec Kraken Command Center Dock Lighting Power \u0026 Control Box, 110-240VAC, IP67, Poco Module, Bluetooth\/WiFi","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101638 is a Kraken Command Center that powers and controls a Kraken dock lighting system from one weatherproof enclosure. It accepts 100 to 300VAC, 50\/60Hz input and provides 24VDC output for the connected lights, with a maximum 480W load rating for the system. The housing is IP67-rated and measures 15.25 in tall x 11 in wide x 5.4 in deep.\u003c\/p\u003e\u003cp\u003eThis unit includes a POCO digital lighting control module for wireless control from a connected smart device, so you can group lights and adjust color or intensity when used with PLI-compatible fixtures. It is built to run up to six Kraken underwater lights (sold separately) and can also be used as the hub for a mixed layout that includes Nautilus piling lights and Scallop pathway lights.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIntegrated command center with built-in 24VDC power output and a 480W maximum system load rating\u003c\/li\u003e\n\u003cli\u003eSupports up to six Kraken underwater lights on a single command center\u003c\/li\u003e\n\u003cli\u003ePOCO control module included for wireless lighting control via Bluetooth and Wi-Fi\u003c\/li\u003e\n\u003cli\u003eFour digital control channel outputs plus a constant 24VDC bus for compatible lighting circuits\u003c\/li\u003e\n\u003cli\u003eIP67-rated grey plastic enclosure for outdoor dock environments, with an operating temperature range of -31°F to 131°F\u003c\/li\u003e\n\u003cli\u003eEnclosure dimensions: 15.25 in (H) x 11 in (W) x 5.4 in (D)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCommand center enclosure with integrated power supply\u003c\/li\u003e\n\u003cli\u003ePOCO digital lighting control module\u003c\/li\u003e\n\u003cli\u003eBus connectors\u003c\/li\u003e\n\u003cli\u003eFuses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting location so every light cable can reach the enclosure without being stretched, pinched, or routed where boats can chafe it. The enclosure is intended for wet outdoor locations, but it should still be mounted to a solid structure with the cable entries pointing down to help shed water. Leave breathing room behind the enclosure for airflow and service access to breakers, fuses, and wiring.\u003c\/p\u003e\u003cp\u003eAll installer-made cable connections should be kept out of the water. In tidal areas, account for tidal swing so junction points stay well above the highest expected waterline.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis system uses high-voltage AC input and should be installed by a qualified person following applicable electrical codes. Feed it from a GFCI-protected circuit. The low-voltage side is 24VDC, and the command center is designed to be switched by a timer, photocell, or toggle switch upstream of the receptacle when needed. Do not put the command center on a dimmer.\u003c\/p\u003e\u003cp\u003eWhen distributing loads across channels, stay within the channel limits for the installation: channels 1 and 2 share a combined 10A limit, and channels 3 and 4 share a combined 10A limit. Keeping wiring runs protected from abrasion and strain is especially important under docks and around pilings.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe command center is meant for Kraken modular dock-light layouts and works with PLI-compatible Lumitec DC lighting circuits. It supports mixed systems that combine underwater lights with above-water pathway and piling fixtures, as long as the wiring is configured to match the fixture type and control method used in the system.\u003c\/p\u003e\u003ch6\u003eUse cases on the dock\u003c\/h6\u003e\u003cp\u003eThis setup makes sense for private docks, lifts, and marina slips where you want one enclosure to manage multiple lighting points rather than separate power supplies scattered around the dock. It is a good match for owners who want to organize lights into zones and control scenes from a phone or tablet while staying within a single centralized power and control hub.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically check that cable glands stay tight, wiring remains supported, and any exposed runs are not rubbing on hardware. Keep the enclosure closed and the sealing surfaces clean so the IP rating is maintained, and replace fuses only with the correct type and rating for the circuit.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268926927029,"sku":"QBP522128","price":2239.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298236_qbp522128.jpg?v=1771540892"},{"product_id":"qbp216480","title":"Lumitec Kraken Secondary Power Supply, For Up to 6 Kraken Underwater Lights, Opto-Coupler, 480W Max Load, 24VDC Output, 100-300VAC 50-60Hz, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101680 is a Kraken secondary power supply with opto-coupler that expands a dock lighting setup by distributing 24VDC power to multiple Kraken underwater lights from one sealed enclosure. It is rated for up to 480W total load and is intended to support up to six Kraken underwater lights when the combined draw stays within the supply limits.\u003c\/p\u003e\u003cp\u003eThe enclosure is IP67-rated and measures about 11 in wide x 5.25 in tall x 5.4 in deep, which helps when you are planning space on a dock pedestal, seawall, or inside a utility cabinet. Inside, power is organized with bus connections and built-in DC breakers, so you can land multiple light runs neatly without turning the box into a bundle of inline fuses.\u003c\/p\u003e\u003cp\u003eThis is a good fit for larger slips and waterfront installs where you want more lights than a single controller can reasonably feed, but you still want clean wiring and predictable protection in a wet, salty environment.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e24VDC low-voltage distribution for Kraken underwater lights, with a 480W maximum load rating.\u003c\/li\u003e\n\u003cli\u003eSupports up to six Kraken underwater lights when total system draw is kept within the power supply limits.\u003c\/li\u003e\n\u003cli\u003eTwo opto-couplers for control signal handling, with support for connecting two POCO channels per box.\u003c\/li\u003e\n\u003cli\u003eBuilt-in DC breakers including a dedicated 20A breaker for the constant 24VDC bus and two 10A breakers shared across the channel outputs.\u003c\/li\u003e\n\u003cli\u003eIP67-rated weather-sealed enclosure for outdoor wet locations and routine washdowns.\u003c\/li\u003e\n\u003cli\u003eCompact footprint (about 11 in x 5.25 in x 5.4 in) for mounting on pilings, dock structures, or inside a protected dock box.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting spot so every light cable reaches the enclosure without splices below the dock deck, then route cables where they will not chafe against pilings, ladders, or moving gear. Mount the enclosure at least 1 foot above ground level with the high and low voltage cables pointing down, and keep a small standoff behind the back plate for airflow.\u003c\/p\u003e\u003cp\u003eFeed each run through the bottom cable glands, tighten the glands until the jacket is secure, then land conductors on the internal buses and channel connections. Supply power from a GFCI-protected circuit and avoid feeding the unit from a dimmer circuit.\u003c\/p\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eThis secondary power supply is part of the Kraken dock lighting system and is used to add capacity for additional underwater lights. It does not include the POCO control module, so system control is handled through a Kraken Command Box that contains the POCO controller.\u003c\/p\u003e\u003cp\u003eIt is intended for underwater Kraken lighting loads and is not used for above-water lighting control. For mixed Kraken setups that include Nautilus piling lights or Scallop pathway lights, those fixtures need to be connected through a Kraken Command Box with the POCO module rather than relying on the secondary box for control.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically open the enclosure to confirm glands are tight, wiring is clean, and there are no signs of overheating or water intrusion. On docks with heavy salt spray, a quick visual check at the start of the season and after major storms helps catch loose hardware or abrasion before it becomes a power or nuisance trip issue.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268927385781,"sku":"QBP216480","price":2319.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298238_qbp216480.jpg?v=1771540894"},{"product_id":"qbp591865","title":"Lumitec Pico S8 Expansion Module, For POCO 3+, 8 SPST Inputs, 10-30VDC, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101684 is a Pico S8 expansion module that brings up to eight physical switches into a POCO digital lighting control system. It runs on 10 to 30 VDC for 12V and 24V boats, and the IP67-rated housing helps it tolerate damp locations behind a helm or switch panel.\u003c\/p\u003e\u003cp\u003eThis module monitors up to eight SPST switch inputs, including toggle, rocker, and momentary types, then uses those switch events to trigger POCO actions. It is a practical way to keep hard switches at the helm, in the cabin, or at an upper station while still using digital scenes and commands through the POCO system, even when an MFD is on another screen or turned off.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSupports up to 8 SPST switch inputs and lets each input be set up for toggle or momentary behavior\u003c\/li\u003e\n\u003cli\u003eWorks with POCO 3 or newer so physical switches can trigger POCO actions and virtual switch commands\u003c\/li\u003e\n\u003cli\u003e10 to 30 VDC input range for both 12V and 24V DC electrical systems\u003c\/li\u003e\n\u003cli\u003eIP67-rated enclosure for marine environments where spray and washdowns are part of normal life\u003c\/li\u003e\n\u003cli\u003eCompact footprint for console and panel installs: 2.6 in tall, 1.9 in wide, 0.52 in deep\u003c\/li\u003e\n\u003cli\u003eUp to four Pico S8 modules can be configured to a single POCO for expanded switch coverage across the boat\u003c\/li\u003e\n\u003cli\u003eRated for -31°F to 131°F operating temperatures in typical on-board spaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a control and input module for the Lumitec POCO lighting control ecosystem. It is not a stand-alone lighting controller and it is not meant to power lighting loads directly. The eight channels are switch inputs with a 0.25A maximum per channel, which is appropriate for sensing switch states and related low-current signaling.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting location around two things: easy wire runs to your switch bank and a reasonable path back to the POCO module. The white housing fits cleanly inside a helm console, flybridge station, or cabin switch panel area, and the onboard indicator LED is helpful during commissioning.\u003c\/p\u003e\u003cp\u003eAfter wiring and powering the module, setup is handled in the POCO configuration menu under the Automation area. Once discovered, each switch input can be defined and then mapped to the POCO actions you want, such as calling scenes or controlling specific lighting groups.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis module is a good match for boats that want the convenience of digital lighting control without giving up familiar physical switches. It is commonly used to add hard controls for cockpit lighting, spreader lights, courtesy zones, or utility lighting so the crew can still reach for a switch when underway, docking, or moving around at night.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268937281717,"sku":"QBP591865","price":227.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298241_qbp591865.jpg?v=1771540953"},{"product_id":"qbp055063","title":"Lumitec Poco 4 Digital Lighting Control Module, For PLI-Enabled Lights, NMEA 2000, 10-30VDC, 4-Channel, 10A per Channel, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101925 is a Poco 4 digital lighting control module that runs a multi-zone onboard lighting system through a connected display or smart device, so you can manage scenes and zones without a panel full of individual switches. It operates on 10 VDC to 30 VDC and provides four output channels rated up to 10 A per channel.\u003c\/p\u003e\u003cp\u003eThe enclosure is white, sealed, and IP67 rated, with a compact footprint of about 5.5 in wide, 3.5 in high, and 1.24 in deep for installs behind helm stations, inside consoles, or in other tight utility spaces. Operating temperature is -35 C to 55 C for use across typical marine environments.\u003c\/p\u003e\u003cp\u003eThis module supports Lumitec PLI-enabled light control, Timed Toggled Protocol (TTP), and integrates over NMEA 2000 and CAN bus for unified control alongside other onboard electronics. It replaces discontinued Lumitec 101699 when updating an existing system.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFour output channels, up to 10 A per channel for separate lighting zones or loads\u003c\/li\u003e\n\u003cli\u003e10 VDC to 30 VDC input range for 12 V and 24 V DC systems\u003c\/li\u003e\n\u003cli\u003eIP67-rated sealed enclosure for damp compartments and washdown-prone areas when installed correctly\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 and CAN bus integration for control from compatible MFDs and digital interfaces\u003c\/li\u003e\n\u003cli\u003eSupports Lumitec PLI control and Timed Toggled Protocol (TTP) behavior\u003c\/li\u003e\n\u003cli\u003eCompatible with Lumitec Pico expansion modules to bring additional circuits and non-PLI loads under control\u003c\/li\u003e\n\u003cli\u003eSound-to-light mode for lighting effects that react to onboard audio\u003c\/li\u003e\n\u003cli\u003eCompact size: approximately 5.5 in x 3.5 in x 1.24 in for space-conscious installations\u003c\/li\u003e\n\u003cli\u003eRated operating temperature: -35 C to 55 C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting location where wiring can be routed cleanly and where you can still access terminals and network connections for service. Even with an IP67 enclosure, good practice is to keep the module out of standing water and to provide strain relief on cables so vibration does not work connections loose over time.\u003c\/p\u003e\u003cp\u003eWhen laying out zones, map each output channel to a real onboard area such as cockpit, hardtop, cabin, or deck lighting. Keeping zones aligned with how the boat is used makes it easier to build scenes that feel natural underway, at anchor, and during docking.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe module is intended for DC systems from 10 VDC to 30 VDC, which covers common 12 V and 24 V boats. Size your supply wiring and overcurrent protection for the loads you are switching and the combined current you may run at one time, and keep all connections clean and protected from corrosion.\u003c\/p\u003e\u003cp\u003eFor NMEA 2000 integration, treat it like any other network device on a properly terminated backbone. Stable network power and correct backbone layout help prevent control dropouts and make lighting control feel immediate at the helm.\u003c\/p\u003e\u003ch6\u003eCompatibility and control\u003c\/h6\u003e\u003cp\u003ePoco 4 is built around Lumitec PLI-enabled lighting control and supports TTP behavior for consistent control across supported lights. Pico expansion module compatibility allows additional channels and non-PLI lighting or accessories to be brought into the same control scheme, which is useful when refitting a boat that already has mixed-brand loads.\u003c\/p\u003e\u003cp\u003eThis is a good fit for boats where the goal is centralized lighting control from a multifunction display or a handheld device while keeping wiring runs and switch panels more manageable.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically inspect power and network connections for corrosion, chafe, and loosened fasteners, especially after the first few outings and after heavy-weather runs. If the module is installed in a locker or console that gets wet, keep the compartment ventilated and support wiring so connectors are not carrying the weight of the harness.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268944982197,"sku":"QBP055063","price":409.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298244_qbp055063.jpg?v=1771540969"},{"product_id":"qbp327984","title":"Lumitec Contour LED Anchor Light, 24 in, White Shaft and Base, 10-30V, USCG 2NM, Locking Retractable Base","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101694 is an all-round LED anchor light with a 24 in white shaft and a white base for mounting on a hardtop, radar arch, or cabin roof. It runs on 10-30 VDC and draws 80 mA at 12V or 45 mA at 24V (0.9W), so it fits typical 12V and 24V DC systems without adding much load. Output is a 360 degree white anchor light with a USCG 2 nautical mile rating.\u003c\/p\u003e\u003cp\u003eThe base retracts and locks so the light can be stowed when you are underway or trailering. The housing uses composite construction to keep weight down, and the assembly is sealed to an IP67 rating for rain, spray, and washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e24 in overall height with 360 degree all-round white anchor output\u003c\/li\u003e\n\u003cli\u003eUSCG rated 2 nautical miles for anchor light visibility\u003c\/li\u003e\n\u003cli\u003e10-30 VDC input for 12V and 24V DC systems\u003c\/li\u003e\n\u003cli\u003eLow current draw: 80 mA at 12V, 45 mA at 24V (0.9W)\u003c\/li\u003e\n\u003cli\u003eIP67-rated sealing for wet weather and washdowns\u003c\/li\u003e\n\u003cli\u003eBase retracts and locks, so the pole can be stowed when not in use\u003c\/li\u003e\n\u003cli\u003e2-wire hookup for a standard anchor-light switch circuit\u003c\/li\u003e\n\u003cli\u003e2.5 in diameter profile\u003c\/li\u003e\n\u003cli\u003eCE certified and conforms to ABYC A16\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -31F to 131F (-35C to 55C)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the base on a flat surface where the light can extend and retract without hitting antennas, rails, outriggers, or canvas. On an arch or hardtop, place it where the lens has a clear 360 degree view and stays above gear that could block it at anchor.\u003c\/p\u003e\u003cp\u003eBed fasteners and the wire exit with marine sealant, then route the two conductors to a dry chase below deck. Use tinned marine wire and sealed connectors, and leave a small service loop so the base can be removed later without cutting the harness.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis light is a straightforward 2-wire load on 10-30 VDC. Tie it into an existing anchor light switch or a dedicated breaker, and protect the circuit with a fuse or breaker sized for the run and the small current draw. Keep connections above the waterline and away from heat sources where possible.\u003c\/p\u003e\u003ch6\u003eCompliance and visibility\u003c\/h6\u003e\u003cp\u003eWhen used as an anchor light, the lens needs a clear 360 degree view. Avoid mounting next to vertical antennas, rocket launchers, or raised rails that can shadow the light in certain directions.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eIt suits boats that anchor overnight and want an anchor light that stows down to reduce snags when lines and covers come out. The 24 in height is a practical middle ground when you need the light lifted above deck clutter without committing to a full-length pole.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue off the base and lens during routine washdowns, and occasionally check that the lock mechanism moves freely. Inspect the wiring pass-through and connectors each season for chafe and corrosion, especially if the light lives on an exposed arch.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268945703093,"sku":"QBP327984","price":158.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298248_qbp327984.jpg?v=1771540970"},{"product_id":"qbp505128","title":"Lumitec Javelin 600X LED Underwater Light, RGBW, 6000+ lm, 10-30V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101705 is a surface-mount, full-color RGBW underwater light for transom installs on 12V or 24V DC boats (10-30 VDC). In white mode it produces 6,000+ lumens with a 6500K output and CRI 70+, and the light body is about 8 in long by 2 in high for a clean, low-profile look on the outside of the hull.\u003c\/p\u003e\u003cp\u003eThe housing is plated bronze and the light is IP68 sealed for continuous submersion. Power draw is 5A at 12V (2.5A at 24V), so it fits typical marine lighting circuits without guesswork.\u003c\/p\u003e\u003cp\u003eIt can be run from a standard on\/off switch using timed-toggle control for color selection, or integrated into a Poco system for app or display control, dimming, and scene control when a Poco module is used. Sold as a single light.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRuns on 10-30 vDC for 12V and 24V electrical systems\u003c\/li\u003e\n\u003cli\u003eRGBW Spectrum output with 6,000+ lumens in white mode (6500K, CRI 70+)\u003c\/li\u003e\n\u003cli\u003e5A at 12V and 2.5A at 24V, with a 60W rated load for power planning\u003c\/li\u003e\n\u003cli\u003eIP68 sealed build for below-waterline use\u003c\/li\u003e\n\u003cli\u003eSurface-mount install with a 0.5 in pass-through hole and simple 3-wire hookup\u003c\/li\u003e\n\u003cli\u003eTimed-toggle control from a standard power switch with no external controller box\u003c\/li\u003e\n\u003cli\u003ePLI-enabled for Poco system integration\u003c\/li\u003e\n\u003cli\u003ePlated bronze housing with a polished finish and silicon bronze mounting screws\u003c\/li\u003e\n\u003cli\u003eBuilt-in reverse-polarity, surge, and ignition protection\u003c\/li\u003e\n\u003cli\u003eOver 2,000 hours of ASTM B-117 salt spray testing and a 3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis light is a transom-style mount. A typical placement is 6 to 12 in below the waterline, avoiding running surfaces. On boats with multiple lights, spacing them about 1 to 3 ft apart helps spread light across the wake and stern area.\u003c\/p\u003e\u003cp\u003eMount to a flat, clean surface and bed the fixture with marine sealant. Plan the wire path inside the hull before drilling, and leave room for the strain relief and wiring to sit without chafe. The supplied silicon bronze screws are meant to be tightened by hand rather than with a power driver.\u003c\/p\u003e\u003ch6\u003eElectrical and control integration\u003c\/h6\u003e\u003cp\u003eUse a dedicated fuse per light sized at 7.5A for 12V systems or 5A for 24V systems, and run wiring that keeps voltage drop under control for the length of the run. If the light is installed far from the battery or distribution panel, stepping up wire size is often the difference between full output and a light that blinks from low voltage.\u003c\/p\u003e\u003cp\u003eWiring can be kept simple with a switch-based setup, or expanded for multi-light and digital control. With a Poco module in the system, color selection and dimming can be handled from a compatible display or a connected smart device.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats that want full-color transom lighting with a clean surface mount and straightforward wiring. It also fits installs where you want basic switch control today and the option to add Poco-based control later without changing the fixture.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eJavelin light with 5 ft of 18 AWG wire (orange signal wire is 18 AWG)\u003c\/li\u003e\n\u003cli\u003e3 silicon bronze screws (#10, 1.5 in)\u003c\/li\u003e\n\u003cli\u003eRubber strain relief\u003c\/li\u003e\n\u003cli\u003eInstruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268950651061,"sku":"QBP505128","price":771.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298249_qbp505128.jpg?v=1771541003"},{"product_id":"qbp110037","title":"Lumitec Capri3 Retrofit Kit, Fits Previous Capri Recess, Black Housing, Screwless Spring Clip Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101732 is a black Capri3 retrofit kit that lets you install a Capri3 light in the recessed opening left by the previous line of Capri lights.\u003c\/p\u003e\u003cp\u003eIt uses the same spring clip mounting style as the Capri3 fixture, so the face stays free of exposed screws and sits flush on the mounting surface.\u003c\/p\u003e\u003cp\u003eThis is the right fit when you are updating an older Capri spreader or deck light location and want the Capri3 look without rebuilding the cutout.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRetrofit adapter for installing a Capri3 flush-mount light where an earlier Capri light was previously recessed\u003c\/li\u003e\n\u003cli\u003eSpring clip mounting matches the Capri3 fixture, keeping the front face free of exposed screws\u003c\/li\u003e\n\u003cli\u003eSeats into the existing recess for a flush look on hardtops, towers, and arches\u003c\/li\u003e\n\u003cli\u003eBlack finish to match black-housing Capri3 lights\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis retrofit kit is intended for recessed openings created by the earlier Capri light line. If the opening has been modified, repaired, or cut for a different fixture, fit can vary.\u003c\/p\u003e\u003cp\u003eIt is used as the mounting interface for a Capri3 light, so confirm the Capri3 model you are installing matches your wiring and control setup before starting the swap.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eAfter removing the old light, clean out old sealant and debris so the retrofit kit can sit flat in the recess. The Capri3 light then locks in using the spring clips, which keeps the exterior face smooth and serviceable later.\u003c\/p\u003e\u003cp\u003eAny wiring work happens at the light, not the retrofit kit. If the cutout exposes laminate, core, or fastener holes from a previous install, reseal and protect the area before snapping the new light into place.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of upgrade is common at spreader and deck-light locations that see washdowns and vibration. A screw-free front helps reduce places where salt can collect and keeps the install looking tidy.\u003c\/p\u003e\u003cp\u003eIt is a good match for owners refreshing older Capri installations who want to move to the Capri3 platform while keeping the same recessed footprint in the mounting surface.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268951142581,"sku":"QBP110037","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298258_qbp110037.jpg?v=1771541006"},{"product_id":"qbp689190","title":"Lumitec GAI2 Positionable LED Light, Heavy-Duty Base, Built-In Switch, Warm White 3000K, 226 lm, Dimmable, 10-30V, Brushed Aluminum","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 111909 is a positionable LED utility light with a machined aluminum base, a brushed finish, and a built-in switch for on-the-spot control. It runs on 10-30V DC and produces 226 lumens of warm white light at 3000K with a 90 CRI.\u003c\/p\u003e\u003cp\u003eThis is a practical pick for focused lighting where you want to aim the beam instead of flooding the whole space, like a berth, nav station, helm, galley, or a small onboard work area.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10-30V DC input for 12V and 24V systems\u003c\/li\u003e\n\u003cli\u003eWarm white 3000K output with 90 CRI for more accurate color when reading and working\u003c\/li\u003e\n\u003cli\u003e226 lumens output, 6W load, and about 500mA draw at 12V\u003c\/li\u003e\n\u003cli\u003eBase-mounted on\/off switch for local control right at the light\u003c\/li\u003e\n\u003cli\u003eDimmable and compatible with many third-party dimmers when wired into a dimming circuit\u003c\/li\u003e\n\u003cli\u003e2.53 in base diameter footprint for straightforward surface mounting\u003c\/li\u003e\n\u003cli\u003eBrushed aluminum housing that pairs well with metal trim and helm hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting spot so the light can swing and aim without bumping a bulkhead, headliner trim, or a cabinet door. The 2.53 in base diameter helps you confirm the footprint on flat surfaces like cabin sides, berth panels, and nav stations.\u003c\/p\u003e\u003cp\u003eRoute wiring where it will not chafe with vibration, and keep connections protected from moisture. Use appropriate circuit protection for the branch circuit and make sure any dimmer used is rated for DC LED loads in the 10-30V range.\u003c\/p\u003e\u003ch6\u003eElectrical and dimming notes\u003c\/h6\u003e\u003cp\u003eThe integrated switch makes it easy to shut the light off at the fixture, which is handy in sleeping areas and workspaces. For dimming, tie the light into a compatible dimmer control so you can drop output for night running and keep glare down in the cabin.\u003c\/p\u003e\u003ch6\u003eSafety notice\u003c\/h6\u003e\u003cp\u003eWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268962087093,"sku":"QBP689190","price":275.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298203_qbp689190.jpg?v=1771541074"},{"product_id":"qbp994407","title":"Lumitec Mantis Underwater Dock Light Kit, 3-Light, RGBW, 10-30VDC, 6000 lm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101525 is a Mantis underwater dock lighting system with 2,000-lumen output, full-color RGBW control, and a 6500K white setting.\u003c\/p\u003e\u003cp\u003eIt is meant for fully submerged mounting on dock pilings or seawalls, putting usable light right at the slip face for nighttime tie-ups, ladder visibility, and general dockside awareness after dark.\u003c\/p\u003e\u003cp\u003eEach Mantis dock lighting kit supports up to four lights on a single system. A standard setup starts as a three-light package and can be expanded by adding one additional light, with a four-light maximum per kit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRGBW full-color output plus a 6500K white mode for white light that reads clean in clear water\u003c\/li\u003e\n\u003cli\u003e2,000-lumen output to light up pilings, seawalls, and the waterline zone around a slip\u003c\/li\u003e\n\u003cli\u003eSystem capacity of up to 4 lights per kit; additional kits are used when more than 4 lights are needed\u003c\/li\u003e\n\u003cli\u003eZip-Mount ties, mounting hardware, and cabling support a tidy install with secure fastening and straightforward routing\u003c\/li\u003e\n\u003cli\u003eBuilt for underwater dock-side placement where spray, washdown, and marine growth are part of normal use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the light spacing so the beams overlap without hot spots, then mount the fixtures to the piling or seawall at a consistent depth. Keep cable runs protected from chafe at edges and hardware, and route everything to a dry service area where connections can stay out of standing water.\u003c\/p\u003e\u003cp\u003eOn working docks, mount with enough clearance to avoid routine impacts from fenders, floating debris, and lines. Leave a small service loop where practical so a fixture can be pulled for cleaning without re-running the entire cable.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThese lights are used on low-voltage DC systems. Confirm your supply, switching, and any control hardware match the Mantis system requirements before finalizing the wiring path. Use marine-grade practices for overcurrent protection, strain relief, and keeping splices and terminations in a dry, accessible location.\u003c\/p\u003e\u003ch6\u003eUse cases on the dock\u003c\/h6\u003e\u003cp\u003eThis system fits owners and dock managers who want controllable color lighting for ambience and a strong white setting for task lighting at night. It is also a good match for slips where you want the waterline and pilings lit up for safer returns after sunset.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eLike any submerged fixture, performance stays best with periodic cleaning. Wipe the lens and housing as needed to remove growth and film, and inspect cable routing for abrasion after storms or heavy use.\u003c\/p\u003e\u003ch6\u003eImportant notice\u003c\/h6\u003e\u003cp\u003eThis product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268967198901,"sku":"QBP994407","price":1841.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298205_qbp994407.jpg?v=1771541110"},{"product_id":"qbp690916","title":"Lumitec Mantis Dock Light Add-On, For Mantis Dock Lighting System, RGBW Spectrum, 2000 Lumens, 10-30V, IP68","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101526 is an underwater add-on light that plugs into a Mantis Dock Lighting System when you want to expand a three-light kit to four lights on the same power converter. It runs on 10-30 VDC, draws 2.1A at 12V or 1.1A at 24V, and produces 2000 lumens of full-color RGBW light with a 6500K white channel.\u003c\/p\u003e\u003cp\u003eThe light has a 3.85 inch round face with a 0.71 inch profile, plus an integrated 25 inch cable for the connection back to the system harness. A bronze housing with a heat-tempered glass lens and an IP68 rating let it live below the waterline at a dock or seawall.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAdds one light to a Lumitec Mantis Dock Lighting System, with one power converter supporting up to four lights total\u003c\/li\u003e\n\u003cli\u003eFull-color RGBW output with 6500K white, 2000 lumens, and CRI 70+\u003c\/li\u003e\n\u003cli\u003eWide 10-30 VDC input for 12V and 24V systems; 2.1A draw at 12V and 1.1A draw at 24V\u003c\/li\u003e\n\u003cli\u003eIP68-rated light for full immersion and it can also run above water without damage\u003c\/li\u003e\n\u003cli\u003eZip-Mount system straps to pilings and seawalls; fits round pilings up to 14 inches diameter and square pilings up to 12 inches\u003c\/li\u003e\n\u003cli\u003eBronze housing with a heat-tempered glass lens for long-term saltwater exposure\u003c\/li\u003e\n\u003cli\u003eCompact body: 3.85 inch diameter, 0.71 inch profile; integrated 25 inch cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e(1) RGBW dock light with integrated 25 inch cable\u003c\/li\u003e\n\u003cli\u003eZip-Mount universal light mounting system\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe Zip-Mount system wraps around the piling or seawall so you can position the light without drilling through the housing. For many docks, mounting around 6 inches below the normal low tide mark keeps the lens submerged while still lighting the waterline.\u003c\/p\u003e\u003cp\u003ePlan cable routing before you strap the light in place. Keep the cable away from barnacles, sharp edges, and moving lift hardware, and leave a drip loop where wiring rises into the dry area.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis add-on is meant to connect to the Mantis Dock Lighting System power converter and harness. On the DC side, the light operates on 10-30 VDC, and a typical dock install uses a switched 120V AC outlet for the converter so the lights come on with the outlet timer or switch.\u003c\/p\u003e\u003cp\u003eMatch wiring and overcurrent protection to the current draw and the run length, and keep splices and connectors in a dry junction area above the splash zone.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is an expansion light for the Mantis Dock Lighting System and it is not intended as a standalone underwater transom light for a boat. The power converter is sized for up to four lights, so this add-on is used when the system already has three lights installed.\u003c\/p\u003e\u003cp\u003eThe 3.85 inch round face works well on pilings with fender boards and wraps, and the shallow 0.71 inch profile helps keep it out of the way of lines and bumpers.\u003c\/p\u003e\u003ch6\u003eUse cases on the dock\u003c\/h6\u003e\u003cp\u003eThis light is a good match for slip owners, marinas, and waterfront homes that already run Mantis lighting and want one more light at a dark corner, at the end of a finger pier, or along a seawall return. RGBW output gives you clean white light for visibility or color for ambience when the dock is active after dark.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe the lens occasionally to remove growth and film, since buildup can cut usable light in the water. Check straps and cable routing at the start of the season and after heavy weather.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268967395509,"sku":"QBP690916","price":582.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298212_qbp690916.jpg?v=1771541113"},{"product_id":"qbp203177","title":"Lumitec Capri3 Retrofit Kit, For Capri and Capri2, White Housing, Spring Clip Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101731 is a white retrofit housing kit that lets you mount a Capri3 flush-mount spreader or flood light in the existing recess from an earlier Capri or Capri2 light. It is meant for refits where you want the updated Capri3 mounting style while keeping the original cutout in your hardtop, tower, or arch.\u003c\/p\u003e\u003cp\u003eThe housing uses the same spring clip, clamp-in mounting style used by the Capri3 fixture, so the front face installs without exposed screws. Electrical performance is driven by the Capri3 light you pair it with, and Capri3 spreader lights run on 10-30 VDC for 12V and 24V systems.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRetrofit housing for installing a Capri3 flush-mount light into an existing Capri or Capri2 recess\u003c\/li\u003e\n\u003cli\u003eClamp-in, spring clip mounting style that keeps the face clean with no exposed fasteners\u003c\/li\u003e\n\u003cli\u003eWhite finish that blends in well on many hardtops, liners, and deck surfaces\u003c\/li\u003e\n\u003cli\u003eHelps avoid re-cutting or re-drilling when updating older Capri-series spreader and deck lights\u003c\/li\u003e\n\u003cli\u003eCovered by Lumitec limited warranty terms (5 years for products purchased on or after January 1, 2025)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis retrofit kit is for boats that already have the recess from older Lumitec Capri or Capri2 flush-mount lights. It is used as the retrofit housing when stepping up to a Capri3 flush-mount fixture, so confirm you are installing a Capri3 light in the same location and that your existing cutout matches the earlier Capri-style recess.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eTypical install is a straightforward swap: remove the previous light, clean the recess, and check the wiring and sealing surface before bedding the housing as needed for your mounting area. The Capri3 light then seats into the retrofit housing and locks in with the Capri3 spring clips, which helps keep the installation tidy on a hardtop or tower where washdowns are common.\u003c\/p\u003e\u003cp\u003eAs with any exterior lighting on a boat, seal any disturbed penetrations to prevent water intrusion and keep wiring practices in line with ABYC guidance for circuit protection and connections.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis retrofit kit makes sense for owners doing a hardtop or tower refresh who want the Capri3 mounting style without reworking gelcoat around the cutout. It is a practical fit for coastal cruisers and fishing boats that rely on spreader lighting at the dock, at anchor, and during night rigging.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the area after saltwater use and check the bedding line during routine inspections, especially on towers that see vibration. If you ever pull the light for service, inspect and renew sealing where needed before reinstalling.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52269078347957,"sku":"QBP203177","price":7.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298334_qbp203177.jpg?v=1771541738"},{"product_id":"qbp167971","title":"Lumitec Orbit Flush Mount LED Downlight, 10-30V, IP67, Ignition Protected, White\/Red Dimming, 5000K White, Brushed Finish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 112502 is a flush-mount LED downlight with white and red dimming for 10-30V DC systems. White output is 5000K at 150 lumens, with a 4W draw, so it fits cleanly into typical 12V and 24V house lighting circuits without needing a driver.\u003c\/p\u003e\u003cp\u003eIt is fully sealed to IP67 and certified ignition protected, which matters when the mounting location sees spray, washdowns, or fuel vapor areas. The small bezel (1.99 in diameter) and shallow mounting depth (0.43 in) make it a good fit for headliners, hard tops, and overhead panels where space behind the surface is tight.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10-30V DC input range (works on 12V and 24V systems) with a 4W rated draw.\u003c\/li\u003e\n\u003cli\u003eWhite mode output: 5000K, 150 lumens, CRI 70+.\u003c\/li\u003e\n\u003cli\u003eWhite and red dimming built into the light, with no external control modules or special switches required.\u003c\/li\u003e\n\u003cli\u003eIP67 sealed for wet locations and routine washdowns.\u003c\/li\u003e\n\u003cli\u003eCertified ignition protected for installations where ignition protection is required.\u003c\/li\u003e\n\u003cli\u003eCompact fit: 1.23 in cutout, 1.99 in overall diameter, 0.43 in mounting depth (0.72 in overall depth).\u003c\/li\u003e\n\u003cli\u003eSecure composite mounting system that locks the light into its mounting plate.\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -35C to +55C (-31F to +131F).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOrbit down light (brushed finish, white and red dimming)\u003c\/li\u003e\n\u003cli\u003eMounting plate\u003c\/li\u003e\n\u003cli\u003eMounting screws\u003c\/li\u003e\n\u003cli\u003eRubber installation tool\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is a true flush-mount downlight that installs through a 1.23 in cutout with a 1.99 in bezel on the finished side. Plan for 0.43 in of clearance behind the mounting surface for the body, which helps when you are working above liners, under a hard top, or in thin cabin overhead panels.\u003c\/p\u003e\u003cp\u003eMounting is straightforward: fasten the included mounting plate to the surface, connect to your vessel’s DC supply (the light is polarity sensitive), then insert and rotate the light until it locks in place. If your installation is in a high-vibration area, make sure the mounting surface is solid and the plate is seated flat before locking the light in.\u003c\/p\u003e\u003ch6\u003eElectrical and onboard control\u003c\/h6\u003e\u003cp\u003eThe light runs directly from vessel DC power and can be controlled by a standard SPST on-off switch. Dimming and color control are handled in the light itself, so you do not need extra wire runs for separate color circuits.\u003c\/p\u003e\u003cp\u003eFor typical switch control behavior, cycling the power is used to step through functions, and an off time of a couple of seconds resets the light back to white the next time it is turned on. This is handy when multiple lights share a circuit and you want them to come up the same way after being shut down.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eWhite and red dimming works well in cabins, berths, helm areas, and under hard tops where you want bright task lighting in white and a red mode that is easier on night vision. It is also a good match for refits where you want a small, modern downlight that fits tight overhead spaces.\u003c\/p\u003e\u003ch6\u003eCare and placement\u003c\/h6\u003e\u003cp\u003eIP67 sealing covers normal rain, spray, and washdowns, but the light is not intended for permanent underwater mounting. Use normal marine wiring practices, keep connections protected in a dry area when possible, and avoid leaving exposed splices in overhead cavities where condensation can sit.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52269079003317,"sku":"QBP167971","price":129.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298335_qbp167971.jpg?v=1771541741"},{"product_id":"qbp675560","title":"Lumitec Lutra LED Livewell Light, Poco Digital Lighting Control Compatible, Full-Color Spectrum, 10-30V, IP68, 281 lm, 2 in Diameter, White Housing","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101621 is a fully submersible LED livewell and utility light with full-color Spectrum output for wet compartments on board. It runs on 10-30 vDC (12V or 24V systems), draws up to 0.50A at 12V or 0.25A at 24V, and puts out 281 lumens while consuming 5.7W.\u003c\/p\u003e\u003cp\u003eIt is rated IP68 for continuous exposure to water and is built to handle the kind of washdowns, splashing, and immersion that livewells and fish boxes see. White mode is 5000K, and the housing finish is white for a clean install in bait tanks, lockers, and utility spaces.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP68-rated light head for livewells, fish boxes, splash wells, and other spaces that stay wet\u003c\/li\u003e\n\u003cli\u003eWide 10-30 vDC input range for 12V and 24V electrical systems\u003c\/li\u003e\n\u003cli\u003e281-lumen output with 5.7W draw for practical brightness in enclosed compartments\u003c\/li\u003e\n\u003cli\u003eSpectrum full-color output with a 5000K white mode for everyday rigging and cleanup\u003c\/li\u003e\n\u003cli\u003eTwo-wire DC hookup: red to positive, black to negative (ground)\u003c\/li\u003e\n\u003cli\u003eToggle-based control: white ramps up on power-up and can be held at a dimmer level by briefly toggling power during the first 4 seconds\u003c\/li\u003e\n\u003cli\u003eColor cycle and lock: after the light is on in white mode, a quick off\/on toggle within 2 seconds starts the color cycle and another quick toggle locks the color\u003c\/li\u003e\n\u003cli\u003eCompact through-mount size: 2.0 inch face diameter, 2.22 inch overall depth, and a 1.29 inch (33mm) mounting hole\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eFit and mounting\u003c\/h6\u003e\u003cp\u003eThis light mounts through a round cutout with a 1.29 inch (33mm) hole size, and the visible face measures 2.0 inches across. Plan for about 2.22 inches of depth behind the panel so the body clears plumbing, baitwell fittings, and insulation in the tank wall.\u003c\/p\u003e\u003cp\u003eFor installations through cored fiberglass or wood panels, seal the exposed core at the cutout so water cannot migrate into the laminate. Keep wiring supported so vibration and hatch movement do not pull on the leads.\u003c\/p\u003e\u003ch6\u003eWiring and control\u003c\/h6\u003e\u003cp\u003eWire it on a protected circuit with an appropriately sized fuse or breaker, then connect red to your DC positive feed and black to negative (ground). On basic switched power, it starts in white mode and ramps up over about 4 seconds; a quick off\/on during that ramp holds a dimmer white level.\u003c\/p\u003e\u003cp\u003eTo access full-color Spectrum mode without a controller, the light needs to be on in white mode first. A quick off\/on toggle within 2 seconds starts the color cycle, and another quick toggle within 2 seconds locks the current color. If power is off for more than 2 seconds, it returns to white mode the next time it is switched on.\u003c\/p\u003e\u003cp\u003eIt is also compatible with the Lumitec Poco Digital Lighting Control system for integrated color control alongside other Poco-enabled lights.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eLutra is a good match for larger livewells and bait tanks where you want consistent illumination for bait checks, rigging, and cleaning, plus the option to set colors for nighttime deck work. It also works well in fish boxes, transom compartments, and wet lockers where lights often fail from constant exposure to water.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eIn saltwater boats, rinse the area around the light during washdowns and keep wire connections above standing water when possible. Periodically inspect the wiring for chafe near lids, hinges, and pump plumbing, especially in livewell walls that see frequent vibration.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52269332496565,"sku":"QBP675560","price":146.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299644_qbp675560.jpg?v=1771543427"},{"product_id":"qbp472514","title":"Lumitec Pico C4-MAX RGB\/RGBW Control Expansion Module, For Poco System, 10-30V, 10A\/Ch, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101873 is a Pico C4-MAX expansion module that adds control for third-party RGB or RGBW lighting to a Poco-based system, or to a simple on\/off switch using Timed Toggled Protocol (TTP). It runs on 10vDC to 30vDC and carries an IP67 rating for washdown-prone marine installs.\u003c\/p\u003e\u003cp\u003eWith up to 10A per channel available, it is a practical way to bring strip lighting, accent zones, and lighted speaker rings under the same color and dimming behavior as the rest of your onboard lighting. The compact housing measures about 3.5 in x 3.1 in x 0.88 in, which helps when you are tucking it into a console, cabinet, or electrical locker.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eControls third-party RGB or RGBW lighting accessories through Poco control or TTP switch control\u003c\/li\u003e\n\u003cli\u003e10vDC to 30vDC input for common 12V and 24V boat systems\u003c\/li\u003e\n\u003cli\u003eUp to 10A per channel capacity for higher-draw accent and strip light zones\u003c\/li\u003e\n\u003cli\u003eIP67-rated enclosure for better protection against water ingress and dust\u003c\/li\u003e\n\u003cli\u003e5-wire RGBW output layout with a dedicated RGBW-only negative lead when used with RGBW loads\u003c\/li\u003e\n\u003cli\u003eStatus indicator provides quick feedback for power, output on\/off, PLI messages, and fault conditions\u003c\/li\u003e\n\u003cli\u003eRated operating temperature from -31F (-35C) to 131F (55C)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis module is meant for constant-voltage RGB or RGBW accessories that do not have Lumitec PLI built in. It uses a common positive output with separate negative outputs for color channels, which matches the wiring style found on many marine RGB\/RGBW strip and accent products. Confirm your accessory wiring and total current draw so each channel stays within its 10A limit.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the unit where it will stay supported and serviceable, then bring power in on the red (V+) and black (V-) leads. A 10A fuse is specified for the V+ input and a 10A fuse is included. The orange signal wire can be tied into a Poco control channel for digital control, or connected to any SPST toggle or rocker switch when you want standalone TTP control. Wire your lighting load to the RGBW outputs, leaving the white RGBW-only negative disconnected when you are driving an RGB-only accessory.\u003c\/p\u003e\u003ch6\u003eControl behavior on board\u003c\/h6\u003e\u003cp\u003eWhen connected to a Poco system, the module can respond to digital commands for color and brightness changes. In TTP mode, quick off-on toggles step through modes and settings, so you can set a brightness level, cycle through colors, and lock in the output without adding a dedicated keypad. Leaving the signal power off for more than about 4 seconds resets the module behavior.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a solid fit for boats that already run Poco and want to add third-party RGB\/RGBW zones without splitting the helm experience across multiple controllers. It also works well for smaller builds that want color and dimming control from an existing switch position, such as cockpit toe-kick lighting, under-gunnel strips, or cabin accent lighting.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52269461668021,"sku":"QBP472514","price":285.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299985_qbp472514.jpg?v=1771544076"},{"product_id":"qbp608729","title":"Lumitec Maxillume TR150 LED Spot\/Flood Light, 20,000 Lumens, 10-36V DC, IP67, Trunnion Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101492 is a high-output white LED spot\/flood deck light with a bracket (trunnion) mount and white housing. It runs on 10-36V DC for 12V and 24V systems and puts out 20,000 lumens of white light at 5000K (CRI 70+).\u003c\/p\u003e\u003cp\u003eThe housing is sealed to IP67 to keep out water and dust, and it is built for shock and vibration that shows up on hardtops, masts, and commercial rails. Operating range is -35°C to 55°C, so it holds up from cold starts to hot summer decks.\u003c\/p\u003e\u003cp\u003eOverall size is 7.8 in long by 13.7 in wide by 3.76 in deep, and weight is 12.05 lb. Plan for enough clearance to aim the light on its bracket without the beam getting blocked by antennas, outriggers, or canvas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e20,000-lumen white output in a spot\/flood pattern that gives reach ahead while still lighting the working area\u003c\/li\u003e\n\u003cli\u003e10-36V DC input for 12V and 24V boats; draws 17.5A at 12V or 8.75A at 24V\u003c\/li\u003e\n\u003cli\u003e5000K color temperature with CRI 70+ for a white beam that helps you see detail on deck\u003c\/li\u003e\n\u003cli\u003eIP67 sealing for spray, washdowns, and dusty installs\u003c\/li\u003e\n\u003cli\u003eNon-dimming white output with no third-party dimmer compatibility\u003c\/li\u003e\n\u003cli\u003eTested for shock and vibration for mounting locations that take impacts and constant motion\u003c\/li\u003e\n\u003cli\u003eCompact footprint for this output: 7.8 in x 13.7 in x 3.76 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eThis is a DC light with two power leads: red positive and black negative. The power conductors are electrically isolated from the housing.\u003c\/p\u003e\u003cp\u003eBecause current draw is substantial on 12V systems, keep voltage drop in check and size wiring for the run length. A 3-5% voltage drop target is a practical baseline; for example, a 12V install with the light about 20 ft from the power source calls for at least 8 AWG conductors.\u003c\/p\u003e\u003cp\u003eProtect the circuit with an external fuse or breaker matched to the wire gauge and expected operating current. Mount the light where it can get airflow for cooling; when airflow is restricted, the light can reduce power to protect itself.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe wide input range makes it a straightforward match for most 12V and 24V DC distribution panels. If your boat uses PWM or external dimmers for other lights, plan to run this unit on its own switched circuit since it is a non-dimming model.\u003c\/p\u003e\u003cp\u003eThe bracket mount is a good fit for hardtops, arches, mast structures, and deck rails where you want to aim the beam. Verify the mounting surface can handle the load and that you have room for the 13.7 in width.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis light is a strong match for boats that need serious working illumination at night, such as sportfishing boats setting lines, center consoles loading gear at the dock, or workboats running deck operations after dark. The spot\/flood pattern is also useful when you want to pick out buoys or gear ahead while keeping the immediate work area lit.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt off after heavy spray or washdowns and check bracket fasteners and electrical connections as part of regular topside inspections. Keep the lens clean to maintain output, and avoid aggressive solvents that can haze clear plastics.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52269626327221,"sku":"QBP608729","price":1160.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300935_qbp608729.jpg?v=1771544935"},{"product_id":"qbp699655","title":"Lumitec Nevis Legacy Surface Mount Engine Room Light, 10-30V, IP67, Ignition Protected","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101922 is a surface-mount LED engine room and utility light for 10-30V DC systems. It’s fully sealed to IP67 and built for machinery spaces, with certified ignition protection and an intrinsically safe design. Output is cool white at 6500K with 530 lumens from an 11W load.\u003c\/p\u003e\u003cp\u003eIts low-profile footprint (5.00 in wide, 2.5 in high, 0.63 in deep) makes it easy to add light where a bulky fluorescent fixture never fit. This is the kind of fixture you mount over service points in an engine room, generator space, pump bay, or locker so you can see wiring colors, hose runs, and leaks without chasing shadows.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10-30V DC input for both 12V and 24V banks\u003c\/li\u003e\n\u003cli\u003eDraws about 900 mA at 12V and 450 mA at 24V (11W)\u003c\/li\u003e\n\u003cli\u003eCool white output at 6500K with CRI 70+\u003c\/li\u003e\n\u003cli\u003e530 lumens of white light for close-up maintenance work\u003c\/li\u003e\n\u003cli\u003eIP67 sealed housing for damp compartments and washdown exposure\u003c\/li\u003e\n\u003cli\u003eCertified ignition protected and intrinsically safe for machinery spaces\u003c\/li\u003e\n\u003cli\u003eCompact size: 5.00 in (W) x 2.5 in (H) x 0.63 in (D)\u003c\/li\u003e\n\u003cli\u003eOperating range: -35 to +55 C (-31 to 131 F)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis is a straightforward surface-mount light. Pick a location that can throw light across the area you actually service, then route the wire exit in a way that avoids chafe points and heat sources. The fixture can run warm in normal use, so give it some air space and avoid installing it in a tight enclosure that traps heat.\u003c\/p\u003e\u003cp\u003eWire it to a switched DC feed and observe polarity, since it is polarity sensitive. In an engine room, sealed splices and strain relief matter more than fancy connectors, especially where oil mist and vibration are normal. Size wiring and overcurrent protection to match your run length and the unit’s current draw.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThe cool white output is helpful when you’re checking fluid levels, reading labels, or trying to spot a weep at a hose clamp. It’s a solid fit for boaters who want a dedicated service light in the engine room, generator compartment, or under-deck spaces where humidity and spray are part of everyday life.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52269698973877,"sku":"QBP699655","price":250.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301028_qbp699655.jpg?v=1771545298"},{"product_id":"qbp569099","title":"Lumitec Contour Surface-Mount Stern Nav Light, 10-30VDC, USCG 2nm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101598 is a surface-mount stern navigation light with white output and a white finish for transom installations on 12V or 24V boats. It runs on 10-30 VDC and is U.S. Coast Guard approved for 2 NM visibility.\u003c\/p\u003e\u003cp\u003eThis light is meant for retrofit and new installs where you do not have (or do not want to cut) an inset pocket. The housing sits low at 1 in tall, with an overall size of 4.5 in wide by 2.1 in deep, and it draws 18 mA at 12V or 12 mA at 24V (rated 1.5 W).\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSurface-mount composite stern light for installs where a recessed pocket is not practical\u003c\/li\u003e\n\u003cli\u003eWhite output with U.S. Coast Guard approval for 2 NM visibility\u003c\/li\u003e\n\u003cli\u003e10-30 VDC input for 12V and 24V electrical systems\u003c\/li\u003e\n\u003cli\u003eLow current draw: 18 mA at 12V, 12 mA at 24V (rated 1.5 W)\u003c\/li\u003e\n\u003cli\u003eCompact profile for transom mounting: 4.5 in wide x 2.1 in deep x 1 in tall\u003c\/li\u003e\n\u003cli\u003eOperating temperature range from -31 F (-35 C) to 131 F (55 C)\u003c\/li\u003e\n\u003cli\u003eWhite finish for a clean look on light-colored gelcoat and painted surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount it on a horizontal surface at the stern where the light can be seen clearly and is not blocked by outboards, dinghy hardware, ladders, or deck gear. On a transom install, plan wire routing so the cable is protected from chafe and stays supported so it does not flex at the entry point when the boat is moving.\u003c\/p\u003e\u003cp\u003eAs with any through-fastener on the exterior of a boat, seal the fastener holes and cable pass-through appropriately for your mounting surface to help keep water out of the core and wiring runs.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis is a straightforward on and off navigation light. Wire it into your vessel lighting circuit and switch panel, using connections suited for the bilge and transom environment. The 10-30 VDC input range makes it a direct fit for most 12V and 24V DC systems without a separate driver box.\u003c\/p\u003e\u003cp\u003eIf you are replacing an older stern light, confirm the circuit protection and wiring condition while you have the old fixture off. The low current draw can be a nice upgrade for boats that spend long evenings at anchor running nav lights.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCheck clearance at the mounting location before drilling, and measure against the housing size (4.5 in wide x 2.1 in deep x 1 in tall) so it lands cleanly on the surface and does not interfere with trim tabs, tie-down points, or transom doors. This model is intended for stern navigation lighting applications; confirm your vessel requirements and placement so your overall navigation light setup remains compliant for your boat and operating area.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis light is a good match for owners refitting older surface-mounted stern lights, or for new builds where the transom design does not allow a molded pocket. It also suits boats that see regular salt spray and washdowns, where a sealed, low-profile fixture helps keep the stern tidy and easier to clean.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the exterior after saltwater use and check the mounting screws and sealant line during routine washdowns. If your stern area sees a lot of fishing gear contact, take a quick look now and then to make sure the lens face stays clear of nicks and heavy scuffing that can reduce light output.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52269699760309,"sku":"QBP569099","price":86.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301029_qbp569099.jpg?v=1771545299"},{"product_id":"qbp445188","title":"Lumitec Poco 3 Digital Lighting Control Module, For PLI-Enabled Lights, 10-30V, 4-Channel 10A\/Ch, 40A Max, WiFi, Bluetooth-LE, 10\/100 Ethernet, IP65","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101699 is the Poco Digital Lighting Control 3.0 module for dimming and color control of Lumitec PLI-enabled lights from a compatible MFD or a connected smart device.\u003c\/p\u003e\u003cp\u003eIt runs on positive 10 to 30 VDC for typical 12V and 24V systems. The lighting outputs support up to 10 amps per channel, with a 40 amp total limit across all channels, so it can handle multiple lighting circuits when your wiring and protection are sized correctly.\u003c\/p\u003e\u003cp\u003eFor network control, it uses a standard 10\/100 Base-T LAN connection on an RJ45 (CAT-5) cable. Poco 3.0 also adds improved wireless security, an external API for third-party automation, and Triggers that let external inputs activate virtual switches inside the system.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eControls dimming and color on Lumitec PLI-enabled lights through a compatible MFD or a connected smart device\u003c\/li\u003e\n\u003cli\u003e10 to 30 VDC supply range to match 12V and 24V DC boat systems\u003c\/li\u003e\n\u003cli\u003eUp to 10 amps per channel, with a 40 amp combined limit across all channels\u003c\/li\u003e\n\u003cli\u003eACC input (10 to 30 VDC) for remote activation from helm devices or an accessory circuit\u003c\/li\u003e\n\u003cli\u003eStandard 10\/100 Base-T LAN connection using CAT-5 with an RJ45 connector\u003c\/li\u003e\n\u003cli\u003eExternal API support for integration with third-party automation systems\u003c\/li\u003e\n\u003cli\u003eTriggers feature for activating virtual switches through external inputs\u003c\/li\u003e\n\u003cli\u003eOn-unit indicators for power status, channel power supply, PLI data activity, PWM dimming state, and WiFi or Bluetooth-LE connection status\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the install so you can route DC power, lighting circuit wiring, and a CAT-5 network cable without sharp bends or chafe points. On most boats, placement near the DC distribution area or behind the helm makes it easier to keep runs short and keep wiring supported against vibration.\u003c\/p\u003e\u003cp\u003eProvide a positive 10 to 30 VDC feed to the main power input and fuse it before it reaches the unit. Wiring the ACC line gives you a simple way to turn the controller on remotely from a helm device or a switched accessory circuit.\u003c\/p\u003e\u003cp\u003eEach lighting circuit is wired through the IN and OUT terminals for its channel. Keep each channel within the 10 amp limit and keep the combined load across all channels within 40 amps, then match conductors, fuses, and breakers to the actual circuit loads on your boat.\u003c\/p\u003e\u003ch6\u003eNetworking and control\u003c\/h6\u003e\u003cp\u003eThe LAN port uses a standard 10\/100 Base-T connection with an RJ45 connector, which keeps the network side familiar if you are already wiring electronics at the helm. Status lights help you confirm power, channel activity, PLI data transmission, and whether WiFi or Bluetooth-LE is connected during setup and troubleshooting.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis controller is a good match for boats that already run Lumitec PLI-enabled lighting and want centralized control of multiple lighting circuits without adding more physical switches at the helm. It also suits owners who like setting lighting scenes from a chartplotter or a phone when coming into the dock or getting the cockpit ready for an evening run.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52269700284597,"sku":"QBP445188","price":376.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301030_qbp445188.jpg?v=1771545301"},{"product_id":"qbp033534","title":"Lumitec Composite Surface-Mount Starboard Green Nav Light, 10-30V, 2NM","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101597 is a navigation light with starboard (green) output that runs on 10 to 30 VDC and meets USCG requirements for 2 nautical mile visibility. It also meets ABYC A-16 navigation lighting standards.\u003c\/p\u003e\u003cp\u003eThis is the composite, surface-mount style meant for horizontal mounting surfaces when you do not have a molded-in recess. It measures about 2.51 in wide by 2.19 in tall and stands about 0.95 in off the surface, which helps it fit cleanly on a bow cap, gunwale, or hardtop edge.\u003c\/p\u003e\u003cp\u003eInstall it on the starboard side near the bow and keep the lens clear of obstructions so the required sector is not blocked by rails, the hull, deck structures, or onboard hardware under normal running trim.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStarboard green sidelight output for a standard running-light setup\u003c\/li\u003e\n\u003cli\u003eMeets USCG requirements for 2 nautical mile visibility\u003c\/li\u003e\n\u003cli\u003eAccepts 10 to 30 VDC for 12 V and 24 V electrical systems\u003c\/li\u003e\n\u003cli\u003eComposite, surface-mount body suited to horizontal mounting locations\u003c\/li\u003e\n\u003cli\u003eCompact size: about 2.51 in x 2.19 in overall, about 0.95 in tall\u003c\/li\u003e\n\u003cli\u003eMeets ABYC A-16 navigation lighting standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eUse the orientation template to keep the starboard unit aligned correctly on the vessel, then pre-drill for #6 tapping screws. Route the power wire through the wire exit hole and seal around the cable with a marine sealant to help keep spray out.\u003c\/p\u003e\u003cp\u003eFeed the light from a fused navigation-light circuit and verify the light is not shaded by fixed structures or gear once the boat is loaded and trimmed the way you normally run.\u003c\/p\u003e\u003ch6\u003eWho it fits\u003c\/h6\u003e\u003cp\u003eThis light is a practical choice for boats that need a low-profile sidelight on a flat mounting surface and operate on a 12 V or 24 V DC system.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52269734363317,"sku":"QBP033534","price":139.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301119_qbp033534.jpg?v=1771545456"},{"product_id":"qbp077658","title":"Lumitec Surface Mount Aluminum Navigation Light, Starboard Green, USCG 2nm, 10-30VDC","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101835 is a surface-mount navigation light that shows starboard green over a 112.5° arc, with U.S. Coast Guard 2 nautical mile visibility for vessels up to 50 m (165 ft). It runs on 10-30 VDC for 12V and 24V DC systems, and it draws about 25 mA at 12V or 15 mA at 24V in navigation mode.\u003c\/p\u003e\u003cp\u003eThis is the classic aluminum half-round style for mounting on a vertical face when you do not have (or do not want) a molded pocket for inset lights. It fits cleanly on hardtop sides, cabin houses, and radar arches where you need a compact side light that sits proud of the surface.\u003c\/p\u003e\u003cp\u003eThe mounting footprint is about 3.63 in wide, with threaded #10-24 mounting holes and a 2.875 in hole spacing. Mount it with marine-grade sealant, and position it so the output is not blocked by rails, canvas, or hardware and so reflections do not end up in the helm line of sight.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStarboard green navigation output with 112.5° arc coverage\u003c\/li\u003e\n\u003cli\u003eU.S. Coast Guard 2 nautical mile visibility rating for vessels up to 50 m (165 ft)\u003c\/li\u003e\n\u003cli\u003eConforms to ABYC A-16:2016 navigation light requirements\u003c\/li\u003e\n\u003cli\u003eAccepts 10-30 VDC input for 12V and 24V DC systems\u003c\/li\u003e\n\u003cli\u003eLow draw for long runs: about 25 mA at 12V and 15 mA at 24V\u003c\/li\u003e\n\u003cli\u003eAluminum surface-mount housing for vertical mounting when no inset pocket is available\u003c\/li\u003e\n\u003cli\u003eThreaded #10-24 mounting holes (0.45 in thread depth) with 2.875 in mounting center spacing\u003c\/li\u003e\n\u003cli\u003ePositive feed connects to the red lead for straightforward wiring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eUse the mounting template to mark the hole locations and keep the light level so the full arc of visibility stays clear. Starboard lights belong on the right-hand side of the vessel when looking forward, and they need a mounting location that will not be obscured during normal running trim.\u003c\/p\u003e\u003cp\u003eBed the fixture with marine-grade sealant to keep water out of the fastener penetrations. The threaded holes are 0.45 in deep, so match screw length to the available thread depth and your mounting surface thickness.\u003c\/p\u003e\u003cp\u003eWire it to a dedicated navigation-light circuit with appropriate circuit protection. Feed switched positive DC to the red lead, and connect the return lead to your DC negative.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis light is intended to serve as the starboard side light in a standard navigation-light set. Pair it with a matching port (red) side light and the stern or all-round light required for your vessel configuration so the full system meets the visibility and coverage rules for your operating conditions.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for refits where you are replacing older incandescent side lights and want a low-draw LED fixture that mounts on a flat vertical surface. It also fits new builds that need a clean surface-mount solution on hardtops, pilothouses, and arches without cutting an inset pocket.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52269749502133,"sku":"QBP077658","price":234.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301218_qbp077658.png?v=1771545534"},{"product_id":"qbp078185","title":"Lumitec Vertical Surface-Mount Aluminum Navigation Light, Port Red, 10-30V, USCG 2nm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101845 is a surface-mount LED navigation light for the port side that shows red, with a 2 nautical mile visibility rating for vessels up to 50 m (165 ft) and input power support from 10 to 30 V DC.\u003c\/p\u003e\u003cp\u003eIt mounts on vertical surfaces when you do not have an inset pocket, using a half-round machined aluminum housing with a brushed finish and an IP67 rating for wet cockpit and washdown areas.\u003c\/p\u003e\u003cp\u003eThe housing is about 3.63 inches wide and about 2.23 inches tall, and it is meant to be installed so the light is unobstructed and covers the required 112.5 degree arc.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePort (red) sidelight output with the required 112.5 degree arc of visibility\u003c\/li\u003e\n\u003cli\u003eUSCG approved 2 nautical mile rating, ABYC A-16:2016 compliant\u003c\/li\u003e\n\u003cli\u003e10 to 30 V DC input for 12 V and 24 V electrical systems\u003c\/li\u003e\n\u003cli\u003eIP67 sealing for spray and routine washdowns\u003c\/li\u003e\n\u003cli\u003eSurface-mount form for vertical cabin sides, pilothouse faces, and hardtop supports\u003c\/li\u003e\n\u003cli\u003e#10-24 threaded mounting holes (0.45 inch deep) for machine-screw fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFit it on the port side with the lens oriented so the beam is not blocked by rails, rub rails, canvas, or deck hardware. Keeping the light out of the operator's line of sight also helps avoid glare and reflections at night.\u003c\/p\u003e\u003cp\u003eBedding the mounting surface with marine sealant helps keep water out of the fastener holes on a vertical panel. Route the wiring to a navigation light switch circuit and keep connections in a dry location or in a sealed junction area.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis is a simple two-wire light that runs from the boat's DC supply and does not require any network or control module. Use appropriate overcurrent protection for the wiring run and follow common marine wiring practices.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis light suits boats that need a compact, surface-mounted port sidelight in aluminum, especially refits where cutting a molded pocket is not practical. It works well on center consoles, pilothouses, and sailboats running 12 V or 24 V systems that still need full 2 NM sidelights.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52269749862581,"sku":"QBP078185","price":235.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301222_qbp078185.png?v=1771545536"},{"product_id":"qbp206542","title":"Lumitec CapriLT Flush Mount LED Flood Light, White Light, 1000 Lumens, 10-30V DC, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec CapriLT is a flush-mount LED flood light built for deck and spreader use on 12V or 24V DC systems (10-30 VDC). It puts out 1000 lumens of cool white light (5000K) and carries an IP67 rating for wet installations and washdowns.\u003c\/p\u003e\u003cp\u003eThis is a low-profile, rectangular fixture that sits clean in a hardtop, cockpit coaming, or overhead panel. The face measures 4.94 in by 1.75 in, with a 3.87 in by 1.25 in cutout, so it is a good fit when you want a finished look without a bulky housing on the surface.\u003c\/p\u003e\u003cp\u003eIt draws 1.3A at 12V (about 600mA at 24V). The housing is powder-coated die-cast aluminum, and the light includes over-temperature protection for real-world heat in enclosed spaces.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush-mount footprint: 4.94 in x 1.75 in face with a 3.87 in x 1.25 in cutout\u003c\/li\u003e\n\u003cli\u003e10-30 VDC input for both 12V and 24V DC electrical systems\u003c\/li\u003e\n\u003cli\u003e1000-lumen cool white output (5000K) for working light on deck, cockpit, or under a hardtop\u003c\/li\u003e\n\u003cli\u003eIP67-rated sealing for rain, spray, and routine washdowns\u003c\/li\u003e\n\u003cli\u003ePowder-coated die-cast aluminum housing for long-term use in salt and sun\u003c\/li\u003e\n\u003cli\u003eCompatible with most PWM LED dimmers for brightness control from a standard dimmer circuit\u003c\/li\u003e\n\u003cli\u003eNot Poco System compatible\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis light is offered in multiple finish options while keeping the same light output and electrical ratings.\u003c\/p\u003e\u003cp\u003eThe only difference between variants is the housing finish, which changes how the fixture blends into the mounting surface.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e101289: Finish Black. A darker bezel that blends well with black powder-coated tops, dark canvas, or tinted enclosures.\u003c\/li\u003e\n\u003cli\u003e101288: Finish White. A lighter bezel that matches white gelcoat, headliners, and bright hardtop interiors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the cutout and confirm you have room behind the mounting surface before drilling. Allow up to about 1.57 in of depth for the fixture body and wiring, and keep at least 1 in of clearance around the back of the light so heat can dissipate.\u003c\/p\u003e\u003cp\u003eProtect the circuit with an appropriately sized fuse and size the fuse for the number of lights on that run. Typical mounting uses two #6 self-tapping screws after the cutout is made and the pilot holes are drilled.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eWire the light to a DC lighting circuit within the 10-30 VDC range. Current draw is 1.3A at 12V and about 600mA at 24V, which helps when you are planning breaker and wire sizing for multiple fixtures.\u003c\/p\u003e\u003cp\u003eIf the circuit uses a PWM LED dimmer, the light can be dimmed from that control. If your boat uses a digital lighting system, note that this model is not Poco System compatible.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis form factor works well where you want a clean flush install and a wide flood pattern for deck tasks. It is a practical match for boats that need a fixed cool white work light on a hardtop, in the cockpit, or as a spreader light without adding a surface-mount fixture that can snag lines or canvas.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the face after saltwater runs and wipe the lens with mild soap and water. Avoid abrasive pads and harsh solvents that can haze the lens or damage the finish.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Black","offer_id":52270626242741,"sku":"QBP206542-V1","price":141.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":52270626275509,"sku":"QBP206542-V2","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301694_qbp206542.png?v=1771549753"},{"product_id":"qbp207267","title":"Lumitec CapreraLT Bracket Mount LED Flood Light, 10-30V, IP67, 1000 lm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec CapreraLT is a bracket-mount LED flood light for deck and spreader-style lighting on boats, with cool-white output at 5000K and 1000 lumens.\u003c\/p\u003e\u003cp\u003eIt runs on 10-30 VDC for 12V or 24V systems and draws 1.3A at 12V (about 600mA at 24V). The housing is sealed to an IP67 rating for spray, rain, and routine washdowns.\u003c\/p\u003e\u003cp\u003eUse it to light up the cockpit, transom, work areas, or the foredeck, then set the beam where you want it with the adjustable bracket.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCool-white 5000K output with 1000 lumens for clear working light on deck\u003c\/li\u003e\n\u003cli\u003e10-30 VDC input supports both 12V and 24V DC systems\u003c\/li\u003e\n\u003cli\u003eCurrent draw: 1.3A at 12V, about 600mA at 24V\u003c\/li\u003e\n\u003cli\u003eIP67-rated sealing for wet environments and washdowns\u003c\/li\u003e\n\u003cli\u003ePowder-coated die-cast aluminum housing for life in sun, salt, and vibration\u003c\/li\u003e\n\u003cli\u003eBracket mount with adjustable aiming for spreaders, hardtops, arches, and rails\u003c\/li\u003e\n\u003cli\u003eWorks with most PWM LED dimmers for brightness control\u003c\/li\u003e\n\u003cli\u003eNot Poco system compatible\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis light is offered in multiple configurations based on housing color.\u003c\/p\u003e\u003cp\u003eAcross the range, the output stays cool white at 5000K with the same 10-30 VDC electrical range and bracket-mount format. The change is the exterior finish for visual match on board.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e101293: Product color Black. A dark housing blends in with black powder-coated towers and rails and draws less attention when mounted near the helm.\u003c\/li\u003e\n\u003cli\u003e101292: Product color White. A light housing matches white gelcoat and looks clean on arches, hardtops, and cabin sides.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the bracket to a solid backing surface and aim the fixture before final tightening. Route wiring so it is supported, protected from chafe, and kept clear of moving hardware, then seal any deck penetrations appropriate to your mounting surface.\u003c\/p\u003e\u003cp\u003eThe light is polarity sensitive, so confirm positive and negative at the connection point before powering up. Size wiring and circuit protection to the run length and load following ABYC practice.\u003c\/p\u003e\u003ch6\u003eElectrical and dimming\u003c\/h6\u003e\u003cp\u003eThis light is a straightforward fit for boats with 12V or 24V DC distribution, since it accepts 10-30 VDC. When used with a compatible PWM dimmer, you can reduce brightness for night running while keeping the white color temperature fixed at 5000K.\u003c\/p\u003e\u003cp\u003eIt is a good match for owners who want a single-color deck flood and do not need integration with a Poco lighting control system.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Black","offer_id":52270626308277,"sku":"QBP207267-V1","price":125.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":52270626341045,"sku":"QBP207267-V2","price":125.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301704_qbp207267.png?v=1771549774"},{"product_id":"qbp214656","title":"Lumitec Aurora Surface Mount LED Dome Light, 10-30V, IP67, Dimmable, 4in Diameter, 0.73in Depth, Ignition Protected","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec Aurora LED Dome Light is a surface-mount LED ceiling light for 10-30 VDC systems, with IP67 sealing for areas that see spray and washdowns.\u003c\/p\u003e\u003cp\u003eWhite output is rated at 180 lumens with 4W draw and a 5000K color temperature. Current draw is approximately 290 mA at 12 VDC and 160 mA at 24 VDC, and the fixture measures 4.00 in (W) x 4.00 in (H) x 0.73 in (D) for a low-profile fit on overhead panels.\u003c\/p\u003e\u003cp\u003eIt is certified ignition protected, which helps when you are installing lighting in spaces where vapor protection matters along with typical cabin and cockpit locations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOperates on 10-30 VDC for 12V and 24V boats\u003c\/li\u003e\n\u003cli\u003eWhite output rated at 180 lumens, 5000K color temperature, CRI 70+\u003c\/li\u003e\n\u003cli\u003eRated power: 4W; current draw approx 290 mA at 12 VDC and 160 mA at 24 VDC\u003c\/li\u003e\n\u003cli\u003eIP67 compliant sealing for wet areas and washdowns\u003c\/li\u003e\n\u003cli\u003eCertified ignition protected\u003c\/li\u003e\n\u003cli\u003e4.00 in (W) x 4.00 in (H) x 0.73 in (D) surface-mount form factor\u003c\/li\u003e\n\u003cli\u003eDimming and, on two-color versions, color selection are controlled by rotating the bezel\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -35 to +55 C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis series is offered with two trim finishes and three light output options.\u003c\/p\u003e\u003cp\u003eConfigurations vary by finish (white or polished stainless steel) and by light color (white only, white\/blue dimming, or white\/red dimming). Electrical ratings, IP67 sealing, and overall dimensions remain the same across the range.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAurora LED dome light\u003c\/li\u003e\n\u003cli\u003eFour #6 self-tapping mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis is a surface-mount light that fastens with four #6 screws. Plan for a 3\/4 in wire exit hole behind the fixture and pilot holes for the mounting screws, then route your supply wiring to a switched DC circuit.\u003c\/p\u003e\u003cp\u003eOn two-color versions, rotating the bezel selects the light output and sets the dim level. That keeps control at the fixture without adding separate switches at the helm or bulkhead.\u003c\/p\u003e\u003cp\u003eProtect the circuit with a fuse sized for your installation and the number of lights on the run.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe light runs on 10-30 VDC, which covers both 12V and 24V systems. The low current draw is useful when you are planning overnight lighting loads in cabins, cockpits, and hardtop overhangs.\u003c\/p\u003e\u003ch6\u003ePlacement on board\u003c\/h6\u003e\u003cp\u003eIP67 sealing lets Aurora work in places that get wet, such as under a hardtop, in a cockpit overhead, or in a head compartment. The white-only version suits general lighting, while the white\/red or white\/blue versions add a second color for low-glare night use or accent lighting.\u003c\/p\u003e\u003cp\u003eIt is a good match for owners replacing older dome lights who want wide area lighting with lower power draw and a low-profile footprint.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse and wipe the lens and bezel with fresh water and a soft cloth after salt exposure. Avoid abrasive cleaners on the polished stainless steel finish to keep the surface looking clean.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"White \/ Polished Stainless Steel","offer_id":52270630404277,"sku":"QBP214656-V1","price":152.09,"currency_code":"USD","in_stock":true},{"title":"White\/Blue \/ Polished Stainless Steel","offer_id":52270630437045,"sku":"QBP214656-V2","price":153.19,"currency_code":"USD","in_stock":true},{"title":"White\/Red \/ Polished Stainless Steel","offer_id":52270630469813,"sku":"QBP214656-V3","price":153.89,"currency_code":"USD","in_stock":true},{"title":"White \/ White Finish","offer_id":52270630502581,"sku":"QBP214656-V4","price":134.79,"currency_code":"USD","in_stock":true},{"title":"White\/Blue \/ White Finish","offer_id":52270630535349,"sku":"QBP214656-V5","price":137.79,"currency_code":"USD","in_stock":true},{"title":"White\/Red \/ White Finish","offer_id":52270630568117,"sku":"QBP214656-V6","price":135.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1303062_qbp214656.jpg?v=1771549833"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/collections\/1279101_lumitec.webp?v=1768106215","url":"https:\/\/www.qualityboatparts.com\/collections\/lumitec.oembed?page=2","provider":"Quality Boat Parts","version":"1.0","type":"link"}