{"title":"JL Audio","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","products":[{"product_id":"qbp095795","title":"JL Audio MMR-40 Wired NMEA 2000 Network Controller, For JL Audio MediaMaster, 2.8in Full-Color LCD, IP66","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-03129-00 is the JL Audio MMR-40 wired NMEA 2000 network controller that adds a full-function remote station for a connected MediaMaster source unit.\u003c\/p\u003e\u003cp\u003eIt connects with a NMEA 2000 Micro-C connector and shows source and control information on a 2.8-inch full-color LCD, with backlit buttons and a day or night display setting that can be changed from the face.\u003c\/p\u003e\u003cp\u003eThe front is IP66 rated for wet helm and cockpit locations, and the included mounting template calls out 3.74 in (95 mm) and 3.12 in (80 mm) reference dimensions to help plan panel space before cutting.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000 Certified network controller (LEN 4) for MediaMaster source unit control over the boat network.\u003c\/li\u003e\n\u003cli\u003e2.8-inch full-color LCD with large backlit controls for visibility on an open console or enclosed helm.\u003c\/li\u003e\n\u003cli\u003eDay and night display themes with lighting controls from the keypad for easier viewing after dark.\u003c\/li\u003e\n\u003cli\u003eIP66-rated face for rain, spray, and routine washdowns; it is not intended for submersion or high-pressure water spray.\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 Micro-C connection for a standard backbone, using the appropriate NMEA 2000 cables and connectors (not included).\u003c\/li\u003e\n\u003cli\u003eCan be connected directly to one host MediaMaster using MMC-PN2K powered network cables (sold separately) to form an isolated, stereo-only NMEA 2000 network; powered-cable setups support up to two NMEA 2000 devices.\u003c\/li\u003e\n\u003cli\u003eUSB connection for future software updates.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis controller is built for flush mounting into a dash or panel. Use the included template to mark the cutout and pilot holes, and make sure you have clearance behind the mounting surface for the unit and its harness before you drill. The gasket seals the bezel against the panel when installed.\u003c\/p\u003e\u003cp\u003eFor boats with an existing NMEA 2000 backbone, connect it with a Micro-C drop cable and tee (not included). For a stereo-only install without a backbone, it can be linked to one MediaMaster using MMC-PN2K powered network cables (sold separately) and a 12 V feed. This unit does not operate as a stand-alone controller and requires a connected MediaMaster source unit.\u003c\/p\u003e\u003ch6\u003eCompatibility and on-board use\u003c\/h6\u003e\u003cp\u003eThe MMR-40 makes sense when you want MediaMaster control at a second location, such as adding a remote at the aft cockpit, near a fishing station, or at a second helm. It is a straightforward fit for boats already running NMEA 2000, and it also works for installations where the stereo is the only NMEA 2000 segment.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMMR-40 network controller\u003c\/li\u003e\n\u003cli\u003eMounting gasket\u003c\/li\u003e\n\u003cli\u003eMounting template\u003c\/li\u003e\n\u003cli\u003eFour mounting screws\u003c\/li\u003e\n\u003cli\u003eProtective sun cover\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256223658165,"sku":"QBP095795","price":323.33,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284777_qbp095795.webp?v=1771286668"},{"product_id":"qbp096326","title":"JL Audio MLC-RW RGB LED Lighting Controller, 10-17.6V, 30A, WiFi","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-13428-00 is a JL Audio MLC-RW marine lighting controller for RGB LED circuits, giving you color and brightness control from the included rotary encoder or over Wi-Fi using the LiteWave ITI app on a compatible iOS or Android device. It runs on 10 to 17.6 V DC and supports up to 30 A continuous output (up to 400 W).\u003c\/p\u003e\u003cp\u003eThis controller is built around a common-positive RGB layout: your lighting network shares a +12 V feed, and the controller provides separate negative outputs for the red, green, and blue channels. That wiring style matches many marine RGB accent systems used for cockpit and cabin glow, speaker rings, toe-kick lighting, lockers, and hardtop or helm-area accents.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10 to 17.6 V DC operating range for typical 12 V onboard electrical systems\u003c\/li\u003e\n\u003cli\u003eUp to 30 A continuous output capacity (up to 400 W total load)\u003c\/li\u003e\n\u003cli\u003eCommon-positive RGB wiring with dedicated negative outputs for Red, Green, and Blue channels\u003c\/li\u003e\n\u003cli\u003eBuilt-in Wi-Fi (802.11 b\/g\/n) for wireless control alongside the physical rotary encoder\u003c\/li\u003e\n\u003cli\u003eOver-current and short-circuit protection, plus voltage and temperature monitoring\u003c\/li\u003e\n\u003cli\u003eRotary encoder mounts through panels up to 0.625 in (16 mm) thick; an adapter bracket supports under-dash style mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the control module in a spot that stays dry and has airflow, such as behind the helm, inside a protected console, or in an electronics space away from direct spray. Avoid engine compartments and areas that see extreme heat.\u003c\/p\u003e\u003cp\u003eThe rotary encoder gives you on-the-spot control at the helm. It cycles through Color Spectrum, Brightness, and Color Cycle modes, so you can dial in the look without pulling out a phone.\u003c\/p\u003e\u003ch6\u003eElectrical and wiring notes\u003c\/h6\u003e\u003cp\u003ePlan your power feed and fuse based on the total current draw of the connected RGB lighting network. Because this controller can support high current, keep wire routing tidy, protect conductors from chafe, and minimize voltage drop on long runs.\u003c\/p\u003e\u003cp\u003eConfirm your RGB lights are compatible with a shared positive feed and separate negative returns for each color channel. If your lighting system uses a different topology, it may not behave correctly when connected.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats running 12 V RGB accent lighting that want both a physical helm control and optional wireless adjustments from a mobile device. It also fits refits where multiple LED zones are tied into a single RGB network and need smoother dimming and color transitions.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMLC-RW control module\u003c\/li\u003e\n\u003cli\u003eRotary encoder\u003c\/li\u003e\n\u003cli\u003eTwo #8 x 1-1\/2 inch Phillips-head stainless-steel screws (control module mounting)\u003c\/li\u003e\n\u003cli\u003eTwo #8 x 1\/2 inch Phillips-head stainless-steel screws (rotary encoder mounting)\u003c\/li\u003e\n\u003cli\u003eOwner’s manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256223690933,"sku":"QBP096326","price":350.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284788_qbp096326.webp?v=1771286669"},{"product_id":"qbp097470","title":"JL Audio MTPOD-M100-CL Tweeter Mounting Pods, For M-Series Component Tweeters, Clear Anodized, Billet Aluminum, Surface or Deck Mount, Pair","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-13722-00 is a pair of billet aluminum tweeter mounting pods with a clear anodized finish for surface or deck installs on boats.\u003c\/p\u003e\u003cp\u003eEach pod is machined from a single piece of aluminum and uses a slightly up-angled base, which helps aim the highs toward the cockpit instead of straight across the deck. A dedicated wire pathway lets you route the tweeter leads out of sight so the install stays clean.\u003c\/p\u003e\u003cp\u003eFor layout and clearance, each pod measures 2.38 in (60 mm) in diameter with a mounted height of 2.50 in (64 mm) and a mounted depth of about 3.55 in (90 mm). Tweeters are not included.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminum pod with a clear anodized finish that resists corrosion in a saltwater environment\u003c\/li\u003e\n\u003cli\u003eSurface or deck mounting style for installs where a flush mount is not practical\u003c\/li\u003e\n\u003cli\u003eSlightly up-angled base to help spread high frequencies across seating areas\u003c\/li\u003e\n\u003cli\u003eInternal pathway to route and conceal tweeter wiring\u003c\/li\u003e\n\u003cli\u003eMade to house Legacy JL Audio M-Series component tweeters (sold separately)\u003c\/li\u003e\n\u003cli\u003ePod dimensions: 2.38 in (60 mm) diameter, 2.50 in (64 mm) mounted height, 3.55 in (90 mm) mounted depth\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eTwo tweeter mounting pods (one pair)\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThese pods are sized for Legacy JL Audio M-Series component tweeters. If you are pairing them with a different series or a different brand, confirm the tweeter body and flange dimensions before drilling so the tweeter seats correctly in the pod.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePick a mounting spot with enough backside clearance for the 3.55 in (90 mm) mounted depth and a protected route for the speaker wire. On thin fiberglass, aluminum, or composite panels, backing washers or a backing plate help keep the mount solid under vibration.\u003c\/p\u003e\u003cp\u003eAfter drilling, seal exposed core material and fastener holes to keep water out of the laminate. Route audio wiring away from high-current power runs and ignition components to help avoid noise in the system.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eCommon mounting locations include a T-top, hardtop, radar arch, wake tower, and under-gunwale areas where you want the highs aimed toward the cockpit. This is a good match for boats that get regular spray and need a clean, sturdy surface-mount option for component tweeters.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256223756469,"sku":"QBP097470","price":180.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284790_qbp097470.jpg?v=1771286670"},{"product_id":"qbp097684","title":"JL Audio M6-770ETXv3 7.7in Enclosed Tower Marine Coaxial Speakers, 100W RMS, 4 Ohm, Pair, Gloss White Enclosure, Gloss White Classic Grille, Black Tweeter Mesh, Mounting Clamps Sold Separately","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-03276-00 is a 7.7-inch enclosed tower coaxial speaker system sold as a pair for boats that need sound that carries in open air (model M6-770ETXv3-Gw-C-GwGw). Each speaker is a 4 ohm load with 100 W RMS continuous power handling, and it is typically paired with an amplifier in the 40 to 200 W per-channel range.\u003c\/p\u003e\u003cp\u003eThis configuration comes in a gloss white enclosure with a gloss white trim ring and gloss white classic grille, finished with black tweeter mesh. The enclosure measures 7.70 in (196 mm) in diameter and 12.62 in (321 mm) deep, with an overall height of 8.74 in (222 mm) when you account for the clamp receiver.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePair of 7.7-inch enclosed coaxial tower speakers for mounting up high on a tower or other structure, with the option to surface mount when the hardware setup supports it\u003c\/li\u003e\n\u003cli\u003e4 ohm nominal impedance with 100 W RMS continuous power handling; recommended amplifier power is 40 to 200 W per channel\u003c\/li\u003e\n\u003cli\u003e45 Hz to 25 kHz frequency response with 91.0 dB efficiency (1 W at 1 m) for practical output in windy, open-water conditions\u003c\/li\u003e\n\u003cli\u003eFlying-lead speaker connections with 16 AWG wire, 10 ft per speaker, to make clean routing to an amp or distribution point easier\u003c\/li\u003e\n\u003cli\u003eEnclosed housing dimensions: 7.70 in diameter and 12.62 in depth; 8.74 in overall height including the clamp receiver\u003c\/li\u003e\n\u003cli\u003eMounting clamps are required and sold separately, so you can match the hardware to your tower tubing and mounting layout\u003c\/li\u003e\n\u003cli\u003eConstruction that exceeds international standards for salt fog and UV exposure for long-term use on open boats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is an enclosed tower-style speaker system intended for installations where the speakers sit above head level, such as wake towers, hardtops, T-tops, radar arches, and other tubular structures. It also supports surface-mount style installs when the chosen hardware and mounting surface allow for a secure, vibration-resistant fit.\u003c\/p\u003e\u003cp\u003eBecause the mounting clamps are not included, fit is determined by the mounting fixtures you select. Confirm the tubing diameter and available clearance before ordering clamps, and check that the speaker body depth and rotation will not interfere with canvas, lights, antennas, or tower folds.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan your wire run from the tower to the amplifier before mounting. The speaker leads are 16 AWG and 10 ft long, which covers many tower-to-helm routes, but longer boats often benefit from junction points or extended runs using appropriately sized marine speaker cable.\u003c\/p\u003e\u003cp\u003eUse drip loops and protected routing where the wire passes through tubing or near sharp edges. Once installed, seal any penetrations and secure the cable so it cannot chafe under vibration or when the tower is folded.\u003c\/p\u003e\u003ch6\u003eElectrical and amplifier notes\u003c\/h6\u003e\u003cp\u003eThese speakers present a 4 ohm load, so verify your amplifier is stable at the wiring configuration you plan to use. If you are running multiple speakers per channel, map out the final impedance at the amp terminals before you commit to series or parallel wiring.\u003c\/p\u003e\u003cp\u003eThey are rated for 100 W RMS continuous handling per speaker, which helps when matching amplifier output and setting gain so the system plays cleanly without pushing the speakers into distortion.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis setup makes sense for wake and surf boats, center consoles with a hardtop or T-top, and pontoons with a tower where passengers and riders need music that stays present in wind and engine noise. It is also a good match for owners upgrading from small pod speakers who want a larger 7.7-inch format in an enclosed housing while keeping mounting flexible through clamp selection.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse with fresh water after saltwater runs and keep the grilles free of dried salt and sunscreen residue. If the boat is stored outdoors, a tower cover helps reduce long-term UV exposure on finished surfaces between trips.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256223789237,"sku":"QBP097684","price":846.83,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284791_qbp097684.jpg?v=1771286671"},{"product_id":"qbp097805","title":"JL Audio M6-880ETXv3 Enclosed Tower Coaxial Speaker System, 8.8in, 125W RMS Each, 4 Ohm, Gloss White Enclosure, Gloss White Classic Grille, Black Tweeter Mesh, 2pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-03280-00 is an 8.8-inch marine enclosed tower coaxial speaker system sold as a pair, built around a 4-ohm load with 125 W continuous power handling per speaker.\u003c\/p\u003e\u003cp\u003eEach enclosure measures about 8.80 in across and 14.73 in deep, which helps when you are checking tower clearance under a bimini or hardtop. Finish is a gloss white enclosure with a gloss white trim ring and gloss white Classic grille, plus a black mesh over the 1.25-inch silk-dome tweeter. This configuration is also referenced as M6-880ETXv3-Gw-C-GwGw.\u003c\/p\u003e\u003cp\u003eThey mount using compatible clamp fixtures that are required and sold separately, with wiring routed through the fixture for a cleaner run on a tower or arch. Plan amplifier power in the 50 to 250 W per channel range and keep wiring and connections suited for wet, vibrating spaces on board.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e8.8-inch (224 mm) enclosed tower coaxial speakers, sold as a pair\u003c\/li\u003e\n\u003cli\u003e4-ohm nominal impedance; 125 W RMS continuous power handling per speaker\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 50 to 250 W per channel\u003c\/li\u003e\n\u003cli\u003eFrequency response: 38 Hz to 20 kHz (plus or minus 3 dB); sensitivity 90.5 dB at 1 W\/1 m\u003c\/li\u003e\n\u003cli\u003eEnclosure diameter 8.80 in; enclosure depth 14.73 in; height with clamp receiver 9.67 in\u003c\/li\u003e\n\u003cli\u003eInjection-molded enclosure with a mica-filled polypropylene woofer cone and synthetic rubber surround\u003c\/li\u003e\n\u003cli\u003e1.25-inch silk-dome tweeter with black mesh and a built-in 2-way crossover\u003c\/li\u003e\n\u003cli\u003eGloss white enclosure with gloss white trim ring and gloss white Classic grille\u003c\/li\u003e\n\u003cli\u003eMounting clamps and fixtures are required and sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eTwo enclosed tower coaxial speaker systems (pair)\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThese speakers are meant to mount high on a wake tower, T-top, arch, or hardtop using the matching clamp fixtures. Measure your tube or mounting surface first, then select a fixture style and diameter that matches the mount and the aiming you need.\u003c\/p\u003e\u003cp\u003eLeave room for the enclosure depth, and make sure the speaker will clear bimini hardware and board racks through the full range of movement. Route speaker wire through the tower when possible, use tinned copper marine cable, and seal any pass-through points to keep water out of the tube.\u003c\/p\u003e\u003ch6\u003eCompatibility and system planning\u003c\/h6\u003e\u003cp\u003eEach speaker presents a 4-ohm load, so most marine amplifiers can drive them directly on a single channel per speaker. If you are bridging channels or wiring multiple speakers together, confirm the final impedance stays within your amplifier's limits.\u003c\/p\u003e\u003cp\u003eThe passive crossover is built in, so you feed it a full-range amplified signal. Set gain and filtering at the amplifier to match the way you listen on the water.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis setup is a practical match for wake and surf boats that need tower audio to carry back to the rider, and for open-cockpit boats that want more output up top without cutting into interior panels. It also fits well in systems already running an external amplifier in the 50 to 250 W per channel range.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the enclosures and grilles with fresh water and let them dry before covering the boat. Periodically recheck clamp hardware and inspect wiring at the tower base for chafe.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256223822005,"sku":"QBP097805","price":1193.26,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284794_qbp097805.webp?v=1771286673"},{"product_id":"qbp098090","title":"Jl Audio XMD-WHTAIC2-1.5 2-Channel Marine Audio RCA Cable, 1.5 ft, Twisted-Pair","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Jl Audio 010-13554-00 is a 2-channel 1.5 ft (0.46 m) RCA audio interconnect cable (JL Audio XMD-WHTAIC2-1.5) used to carry a left and right line-level signal from a stereo, media master, or zone output to an amplifier input on a boat.\u003c\/p\u003e\u003cp\u003eIt uses OFC copper conductors with polyethylene dielectrics, laid in a twisted-pair arrangement to help keep alternator whine and other onboard noise out of the audio signal. The white, small-diameter PVC jacket and molded connector bodies make routing easier behind a helm or inside cabinetry, and the machined, nickel-plated brass contacts keep the connection secure.\u003c\/p\u003e\u003cp\u003eThis length makes sense when components are mounted close together, such as inside a dash console, behind a bulkhead access panel, or in a small equipment locker where extra slack would have to be coiled.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-channel stereo RCA interconnect with 2 x male RCA on each end\u003c\/li\u003e\n\u003cli\u003e1.5 ft (0.46 m) length for short signal runs between nearby components\u003c\/li\u003e\n\u003cli\u003eOFC copper conductors with polyethylene dielectrics\u003c\/li\u003e\n\u003cli\u003eTwisted-pair conductor layout to reduce noise pickup along the run\u003c\/li\u003e\n\u003cli\u003eMolded connector bodies with a short profile that fits better in tight installation spaces\u003c\/li\u003e\n\u003cli\u003eMachined, nickel-plated brass contacts for consistent connection integrity\u003c\/li\u003e\n\u003cli\u003eWhite, small-diameter PVC jacket that helps with clean routing in marine consoles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eConnect one end to the RCA output pair on your source or signal processor and the other end to the amplifier RCA input pair. Keep left and right channels consistent end-to-end so stereo balance stays correct.\u003c\/p\u003e\u003cp\u003eFor the cleanest results, route this cable away from high-current power and charging wiring where possible. If it must cross power cables, crossing at a right angle helps minimize induced noise. Support the run so it cannot vibrate against sharp edges or get pinched by access panels.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is intended for standard line-level RCA audio connections. It works anywhere you need a short stereo link between marine audio components that use RCA inputs and outputs, including stereos, media masters, DSP or zone devices, and amplifiers.\u003c\/p\u003e\u003cp\u003eIt is not a speaker cable and it is not meant for directly powering speakers. Use it only on the low-level RCA signal side of the system.\u003c\/p\u003e\u003ch6\u003eCare and storage\u003c\/h6\u003e\u003cp\u003eWhen working in salt air and high-vibration areas, check that the RCA plugs stay fully seated and that the jacket is not chafed where it passes through cutouts. If the connection point is in a compartment that can see spray, keep the RCA ends positioned where they are protected from direct water exposure.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256223854773,"sku":"QBP098090","price":27.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284800_qbp098090.jpg?v=1771286674"},{"product_id":"qbp098712","title":"JL Audio MediaMaster 105 MM105 Marine Stereo, NMEA 2000, IP67, 4-Zone, 3.5in Full-Color LCD","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-03132-00 is a MediaMaster 105 marine source unit with a 3.5-inch TFT color display (320 x 480) and four independent audio zones for boats that run separate amps and speaker groups.\u003c\/p\u003e\u003cp\u003eIt operates on 12V negative-ground systems with an allowable input of 10 to 15.9 VDC and uses a 5A fuse. Each zone provides low-voltage RCA outputs, with a stereo pair plus a mono subwoofer output per zone, so it feeds external marine amplifiers instead of driving speakers directly.\u003c\/p\u003e\u003cp\u003eFor planning fit behind the dash, the chassis measures 5.94 in x 3.90 in x 3.94 in (151 mm x 99 mm x 100 mm) with a mounting hole of 4.72 in x 3.25 in (120 mm x 83 mm). The front is rated IP67 for wet helm installs, but it should not be submerged or subjected to high-pressure spray.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12V-only power requirement (10 to 15.9 VDC allowable) for negative-ground systems, with a 5A fuse and 1.5A maximum current draw\u003c\/li\u003e\n\u003cli\u003eFour-zone, 12-channel preamp output layout: a stereo pair plus mono subwoofer RCA outputs for each zone\u003c\/li\u003e\n\u003cli\u003eOutput modes per zone include Relative, Absolute, Fixed, or Off, with Fixed level options of 4V, 2V, or 1V RMS\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 connection with LEN 1 using a Micro-C connector for network integration with compatible controllers and displays\u003c\/li\u003e\n\u003cli\u003eBluetooth audio streaming with Qualcomm aptX support, up to 35 ft (11 m) range, and pairing for up to 8 devices\u003c\/li\u003e\n\u003cli\u003eDual USB ports for media playback: USB 1 supports iPhone or USB storage with 2.1A charging, USB 2 supports USB storage with 500 mA output\u003c\/li\u003e\n\u003cli\u003eTwo stereo RCA AUX inputs with selectable 2V or 1V RMS input sensitivity\u003c\/li\u003e\n\u003cli\u003eAM\/FM tuner with RDS support, plus DAB+ tuning capability; SiriusXM support with a SiriusXM Connect tuner (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eMount it in a location that stays ventilated and protected from direct, heavy spray. Power is a switched +12V feed (red) and ground (black), with the 5A fuse placed at the power connection point. There is also a +12V illumination input (orange) for tying into your dash lighting, and an amplifier remote turn-on output (blue) for triggering external amps.\u003c\/p\u003e\u003cp\u003eOn 24V boats, plan on a proper DC-DC conversion to a stable 12V supply before this unit. If your boat sees voltage sag at start-up or when heavy loads kick on, the built-in low-voltage alert behavior is a useful reminder to check battery condition, cabling, and charging system health.\u003c\/p\u003e\u003ch6\u003eAudio system planning\u003c\/h6\u003e\u003cp\u003eThis layout works well when your boat has separate listening areas that need different volume levels, like cockpit and cabin, or a tower and the main deck. Since each zone has its own RCA outputs, you can route signals cleanly to multiple amplifiers and keep wiring tidy in the helm and electronics bay. Zone naming and per-zone settings help keep control straightforward once the system is tuned.\u003c\/p\u003e\u003ch6\u003eConnections and day-to-day use\u003c\/h6\u003e\u003cp\u003eBluetooth is handy for quick playback from phones and tablets, while USB ports cover stored music and keep devices topped up. For hardwired sources, AUX 1 and AUX 2 accept standard stereo RCA inputs. If you run an NMEA 2000 backbone, the Micro-C connection makes it easy to place the stereo on the network so it can show up as a named device and integrate with compatible control options.\u003c\/p\u003e\u003cp\u003eThis unit is a good match for boaters building a multi-amp system where zone control matters, like cruisers with an interior cabin and an open cockpit, or fishing and tow boats that split speakers across helm, transom, and tower areas.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256224116917,"sku":"QBP098712","price":786.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284801_qbp098712.jpg?v=1771286676"},{"product_id":"qbp101143","title":"JL Audio XD-MINIRCA-6 3.5mm Mini-to-2 RCA Interconnect Cable, 6 ft","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-13458-00 is a 2-channel 3.5 mm (1\/8 in.) mini-to-RCA audio interconnect used to feed a left\/right stereo signal into RCA line inputs on a marine stereo or amplifier. It is 6 ft (1.83 m) long, which is a practical run from a helm pocket or dash-mounted media point to a nearby head unit, amp rack, or signal processor.\u003c\/p\u003e\u003cp\u003eThe mini plug fits standard 3.5 mm jacks, including recessed ports that can be hard to reach with oversized plugs. On the RCA end, the two male plugs carry the left and right channels, so you can connect to a pair of RCA AUX or line inputs.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-channel stereo: one 3.5 mm mini plug to two male RCA plugs (left and right)\u003c\/li\u003e\n\u003cli\u003e6 ft (1.83 m) cable length for typical helm-to-electronics-bay routing\u003c\/li\u003e\n\u003cli\u003e3.5 mm plug shape that fits standard and recessed mini jacks\u003c\/li\u003e\n\u003cli\u003ePure OFC copper conductors with polyethylene dielectrics for low-loss signal runs\u003c\/li\u003e\n\u003cli\u003eMolded connector bodies with machined brass connector elements\u003c\/li\u003e\n\u003cli\u003eSatin black outer jacket that blends in behind panels and in entertainment lockers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is for line-level audio. Your source device needs a 3.5 mm stereo output, and your destination device needs a pair of RCA line inputs. If the destination uses a different connector style or expects speaker-level input, this is not the right connection.\u003c\/p\u003e\u003cp\u003eIt does not connect an amplifier to speakers and should not be used on powered speaker outputs.\u003c\/p\u003e\u003ch6\u003eInstallation and routing on board\u003c\/h6\u003e\u003cp\u003eRoute it through dry spaces and support it so vibration does not work the connectors loose over time. When passing through a bulkhead or a cutout, use a grommet or bushing to protect the jacket from chafe.\u003c\/p\u003e\u003cp\u003eFor cleaner audio, keep it separated from high-current 12 V\/24 V power runs, chargers, and inverter wiring where you can. Leave a little service slack at each end so panels can be removed without yanking the plugs.\u003c\/p\u003e\u003ch6\u003eWho it suits\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats that already have RCA inputs on the stereo or amplifier and want a simple, hard-wired AUX feed from a phone, tablet, portable media player, or other 3.5 mm audio source at the helm or in the cabin.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256224149685,"sku":"QBP101143","price":38.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284809_qbp101143.webp?v=1771286677"},{"product_id":"qbp101477","title":"JL Audio MMC-2Y 2-Way Y-Adaptor for MediaMaster Source Units, For Non-NMEA 2000 Remote Controllers, Up to 3 Remotes","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-13854-00 is a JL Audio MMC-2Y 2-way Y-adaptor that splits a MediaMaster source unit remote connection so you can run multiple non-NMEA 2000 remote controllers. It supports connecting up to three non-NMEA 2000 remotes to one MediaMaster source unit, which is handy when you want control at more than one spot on the boat.\u003c\/p\u003e\u003cp\u003eThis adaptor is part of the JL Audio MediaMaster wired remote cable system that uses a 5-pin connector with a threaded collar. For longer runs, it can be used with MMC extension cables, and each remote cable run can be up to 75 ft (22.8 m) total length between the source unit and that remote.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSplits a MediaMaster wired remote connection to support up to three non-NMEA 2000 remote controllers on one source unit.\u003c\/li\u003e\n\u003cli\u003eWorks with the JL Audio MMC remote cable system that uses a keyed 5-pin connector with a threaded collar.\u003c\/li\u003e\n\u003cli\u003eCompatible with MMC extension cables, including MMC-6 (6 ft) and MMC-25 (25 ft), to reach additional helm stations or zones.\u003c\/li\u003e\n\u003cli\u003eSupports remote cable runs up to 75 ft (22.8 m) total length per remote from the source unit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis adaptor is for MediaMaster wired remotes that are not NMEA 2000 devices. It is commonly used in setups with MediaMaster source units such as MM100S, MM100SBE, or MM50 and wired remotes such as MMR20, MMR20BE, or MMR10W, where the control cables use the 5-pin threaded-collar connection.\u003c\/p\u003e\u003cp\u003eIf your system is using NMEA 2000 network cabling for control, this is not the connection style to look for. Match the connector type on your remote cable and confirm it is the non-NMEA 2000 wired remote system before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the split point where you can keep connections accessible and out of standing water, such as behind the helm, inside a console, or in a dry locker. Align the keyed connectors, then hand-tighten the threaded collar so the connection stays secure under vibration.\u003c\/p\u003e\u003cp\u003eRoute cables with chafe protection where they pass through bulkheads or rigging tubes, and leave a little service loop so the connectors are not carrying the cable weight. On boats that see frequent washdowns, keeping the connection point higher and using a drip loop helps keep moisture from migrating along the cable.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis adaptor makes sense on boats that need more than one wired audio control point, like a main helm and an aft cockpit station, or a cabin remote plus cockpit control on a cruiser. It is also useful when a third wired remote is needed for a tower, transom, or lounge area and you are staying within the allowed cable run length.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDuring seasonal checks, inspect the cable runs for chafe and make sure the threaded collars are still snug. If a connection is opened during service, keep the pins clean and dry before re-mating, and re-secure the cable so the connector is not left hanging in a wet or high-movement area.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256224280757,"sku":"QBP101477","price":38.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284810_qbp101477.webp?v=1771286677"},{"product_id":"qbp102633","title":"JL Audio MediaMaster 55 Marine Source Unit, NMEA 2000 Certified, 10-16V, IP67, 3-Zone Audio, Bluetooth, 2.8 in Color LCD","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-03365-00 is a weather-resistant marine source unit with a 2.8-inch TFT full-color display (320 x 240) and three audio zones for independent control around the boat. The front-panel design is IP67-rated for spray, washdowns, and open-cockpit use, and it runs on 10 to 16 V DC electrical systems.\u003c\/p\u003e\u003cp\u003eFor speaker power, it includes a built-in amplifier rated at 25W x 4 at 4 ohms for Zones 1 and 2, with a 2 ohm minimum per channel when your system requires it. Each zone also supports RCA preamp outputs with a stereo pair plus a dedicated mono subwoofer output, letting you mix powered zones and external amps without having to compromise the layout.\u003c\/p\u003e\u003cp\u003eSources cover the usual onboard mix: Bluetooth (with SBC and Qualcomm aptX audio), USB 2.0, and an analog AUX input, plus AM\/FM tuning with RDS and 18 presets. NMEA 2000 networking is built in via a Micro-C connection (LEN 1) for integration with compatible displays and network remotes.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP67-rated face and controls for marine exposure and routine washdowns\u003c\/li\u003e\n\u003cli\u003e2.8-inch TFT color display with 320 x 240 resolution for at-helm visibility\u003c\/li\u003e\n\u003cli\u003eThree-zone audio architecture with per-zone stereo preamp outputs and a mono subwoofer output\u003c\/li\u003e\n\u003cli\u003eBuilt-in amplification for Zones 1 and 2: 25W x 4 at 4 ohms, with 2 ohm minimum per channel\u003c\/li\u003e\n\u003cli\u003eSystem-friendly power requirements: 10 to 16 V DC input, 15 A max draw, 15 A fuse value\u003c\/li\u003e\n\u003cli\u003eBluetooth audio plus USB 2.0 playback with up to 1 A device charging\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 connectivity on a Micro-C port (LEN 1) for network integration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis unit is meant for a flush helm or console install. The mounting hole size is 3.74 in wide x 3.15 in high (95 mm x 80 mm), and the overall chassis measures 4.65 in x 3.74 in x 3.66 in (118 mm x 95 mm x 93 mm). Before cutting, confirm you have room behind the panel for the chassis depth and for cable bend radius on power, speaker leads, RCA outputs, antenna, and network connections.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003ePlan it like a 12 V-class device: operating voltage is 14.4 V DC nominal (10 to 16 V range) with up to 15 A current draw, so it should be fed from a properly protected circuit using the specified 15 A fuse. If you are pairing it with external amplifiers, the 4V RMS preamp output setting (Relative or Absolute modes) can help keep gain structure clean when runs are long and the environment is noisy.\u003c\/p\u003e\u003cp\u003eFor networked boats, the NMEA 2000 Micro-C connection lets the source unit participate on the backbone. Keep backbone power and termination correct, and avoid spurs that are longer than your network design allows so control stays responsive underway.\u003c\/p\u003e\u003ch6\u003eAudio setup on board\u003c\/h6\u003e\u003cp\u003eThe three-zone layout is handy when the cockpit, cabin, and bow need different volume levels or different content. Each zone includes tone and balance controls plus selectable high-pass filtering (Off, 80 Hz, 100 Hz, 120 Hz) and low-pass filtering for subwoofer outputs (Off, 60 Hz, 80 Hz, 100 Hz), which helps you keep deck speakers clean while letting subs do the low end.\u003c\/p\u003e\u003cp\u003eThis is a good match for boats that have multiple listening areas and want one head unit that can manage them without extra zone processors. It also fits well in refits where you are upgrading from a single-zone stereo but want to keep existing amps and speakers while adding better control and tuning.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256224346293,"sku":"QBP102633","price":463.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284811_qbp102633.webp?v=1771286680"},{"product_id":"qbp102727","title":"JL Audio MediaMaster MM55-HR Hidden Marine Source Unit, NMEA 2000 MFD Control, 10-16V DC, 25W x 4 @ 4 Ohm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-03372-00 is a hidden marine source unit that brings Bluetooth, radio, and USB audio into a three-zone boat system, with control handled through NMEA 2000. It runs on 12 V negative-ground power (10 V to 16 V input), includes a built-in 4-channel amplifier rated 25 W x 4 at 4 ohms, and uses a 15 A fuse.\u003c\/p\u003e\u003cp\u003eThis is meant to mount out of sight in a console or behind a panel, then get operated from a compatible NMEA 2000 control option at the helm and around the boat. The chassis measures 7.68 in x 2.28 in x 4.96 in (195 mm x 58 mm x 126 mm), which helps when you are planning a protected mounting spot with room for cabling and airflow.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHideaway receiver format for installs where you want the stereo brain tucked away and the dash kept for navigation and switches.\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 connectivity with Micro-C connector and LEN 1 for integration on a vessel backbone.\u003c\/li\u003e\n\u003cli\u003eThree audio zones (Z1, Z2, Z3) with separate line-level outputs for left, right, and subwoofer per zone.\u003c\/li\u003e\n\u003cli\u003eBuilt-in 4-channel amplifier (25 W x 4 at 4 ohms) with 2 ohm minimum per channel support.\u003c\/li\u003e\n\u003cli\u003eSpeaker-level outputs for Zone 1 and Zone 2, plus dedicated RCA outputs for all zones for systems that mix internal power and external amplifiers.\u003c\/li\u003e\n\u003cli\u003ePreamp output voltage up to 4 V RMS, with fixed output options selectable at 4 V, 2 V, or 1 V RMS.\u003c\/li\u003e\n\u003cli\u003eBluetooth audio streaming supports SBC and Qualcomm aptX, with connection range up to 35 ft (11 m) in open space.\u003c\/li\u003e\n\u003cli\u003eAM and FM tuner with RDS, plus DAB+ tuning support and up to 18 presets across tuners.\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 input plays MP3, MP4, WAV, AAC, M4A, M4B files and provides up to 1 A device charging.\u003c\/li\u003e\n\u003cli\u003eWater-resistant construction for typical marine exposure; avoid submersion and high-pressure spray.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and control\u003c\/h6\u003e\u003cp\u003eThe unit needs a compatible NMEA 2000 control option to operate. Full functionality is available through a network controller, or through a compatible multifunction display when used with the appropriate MFD data interface. NMEA 2000 control compatibility depends on the entertainment PGNs supported by the display and may require software updates on the helm side.\u003c\/p\u003e\u003ch6\u003eElectrical and network integration\u003c\/h6\u003e\u003cp\u003ePower is for 12 V negative-ground systems only. Plan for a clean 10 V to 16 V DC supply, protect the circuit with a 15 A fuse, and keep grounding solid to avoid noise in the audio system. If your boat is 24 V, use a proper DC-DC converter that can handle peak current demand.\u003c\/p\u003e\u003cp\u003eOn the network side, the Micro-C NMEA 2000 connection drops onto your backbone like any other device, so you will want an open T-connector and correct termination in place. The three-zone layout is a practical fit for boats with separate listening areas such as cockpit, cabin, and bow seating, where each zone needs its own level and tone control.\u003c\/p\u003e\u003ch6\u003eInstallation notes\u003c\/h6\u003e\u003cp\u003eChoose a dry, well-ventilated location and mount it securely so vibration and pounding do not stress the connectors. If the boat sees frequent washdowns, keep the unit away from direct spray and leave a drip loop on wiring where possible. When routing power, speaker, and RCA runs, keep them away from ignition wiring and high-current conductors, and use grommets and loom anywhere the harness passes through fiberglass or metal.\u003c\/p\u003e\u003ch6\u003eWho it suits on board\u003c\/h6\u003e\u003cp\u003eThis setup fits boats where you want the head unit out of sight and you already have, or plan to add, networked control at the helm and around the vessel. It also makes sense for multi-zone systems that use internal amplification for a couple of areas while feeding external amps for larger zones.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256225165493,"sku":"QBP102727","price":409.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284825_qbp102727.webp?v=1771286681"},{"product_id":"qbp102728","title":"JL Audio MediaMaster 105-HR Hidden Marine Source Unit, NMEA 2000 MFD Control, 4-Zone, 12-Channel 4V RMS Preamp Outputs","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-03854-00 is a hidden marine source unit (MediaMaster 105-HR, MM105-HR) that runs a multi-zone audio system while keeping the main chassis out of sight. It operates on 10 to 15.9 V DC with a 5 A fused power feed, so it is a match for 12 V boat systems (24 V installations need a regulated 12 V supply).\u003c\/p\u003e\u003cp\u003eThe main unit is rated IP67 for water resistance, which helps when it is mounted behind the helm, inside a console, or in another spot where humidity and washdowns are common. Operating temperature range is -20 C to +70 C (-4 F to +158 F).\u003c\/p\u003e\u003cp\u003eControl is handled through a NMEA 2000 network connection (Micro-C) or compatible remotes, rather than a built-in front panel. Audio distribution is handled through four zones, each with stereo RCA outputs and a dedicated subwoofer RCA output, plus AUX inputs, Bluetooth streaming, AM\/FM, SiriusXM accessory tuner connectivity, and two USB ports for playback and charging.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHidden chassis style with no built-in front panel controls, intended for use with NMEA 2000 MFD control or compatible wired and wireless remotes\u003c\/li\u003e\n\u003cli\u003eRuns on 10 to 15.9 V DC (12 V nominal) with a 5 A fuse requirement\u003c\/li\u003e\n\u003cli\u003eIP67-rated main unit for mounting locations that see moisture and vibration\u003c\/li\u003e\n\u003cli\u003eFour audio zones with stereo RCA outputs plus a subwoofer RCA output per zone for feeding external amplifiers\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 Micro-C connection; MFD control depends on NMEA 2000 entertainment protocol support and may require a display software update\u003c\/li\u003e\n\u003cli\u003eBluetooth audio streaming with up to 8 paired devices and range up to 35 ft (11 m)\u003c\/li\u003e\n\u003cli\u003eTwo USB ports: USB 1 supports up to 1 A charging output, USB 2 supports up to 500 mA charging output\u003c\/li\u003e\n\u003cli\u003eTwo AUX inputs, AM\/FM antenna input, SiriusXM accessory tuner connection, plus illumination input and an amp turn-on lead\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the chassis where it stays out of direct spray but can still be reached for service and wiring. Leave enough slack to secure the harness, RCA leads, and network cabling so movement at sea does not tug on the connectors.\u003c\/p\u003e\u003cp\u003ePower wiring is a simple +12 V and ground connection with a 5 A fuse. The illumination input can be tied into a vessel lighting circuit if you want the unit to track that signal, and the amp turn-on lead can be used to switch connected amplifiers on and off with the source unit.\u003c\/p\u003e\u003ch6\u003eControl and networking\u003c\/h6\u003e\u003cp\u003eFor helm-based control, connect the Micro-C NMEA 2000 port to your vessel network and use a compatible multifunction display or network controller. Remote control can also be added over Bluetooth Low Energy or via wired remote cabling, and wired remotes can be installed at distances up to 75 ft (23 m) with support for up to three remotes on one source unit.\u003c\/p\u003e\u003ch6\u003eWho it fits\u003c\/h6\u003e\u003cp\u003eThis unit makes sense on boats that already rely on external amplifiers and need zone control across multiple listening areas. It is also a good match when helm real estate is tight and you would rather keep the source hardware hidden, using a display or remote keypad for daily control.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256225198261,"sku":"QBP102728","price":732.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284832_qbp102728.jpg?v=1771286683"},{"product_id":"qbp103239","title":"JL Audio MMA-1-HTML MFD Data Interface, NMEA 2000, For JL Audio MediaMaster MM105\/MM105-HR\/MM55\/MM55-HR","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-03135-00 is an NMEA 2000 network MFD data interface that brings JL Audio MediaMaster controls onto a compatible multifunction display at the helm. It runs on 10 to 15.9 VDC and joins the NMEA 2000 backbone through a Micro-C port (LEN 1), while using its Ethernet port to communicate with the MediaMaster source unit.\u003c\/p\u003e\u003cp\u003eMounted behind the helm or inside a dry electronics space, the module measures 6.77 in wide x 3.98 in deep x 1.73 in high and supports an operating temperature range of -20 C to +65 C (-4 F to +149 F). Once it is on the network, the interface can mirror the familiar MediaMaster screens on the MFD so volume, source, and zone changes stay within reach while you are running the boat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000 Micro-C connection with LEN 1 (50 mA network load) for integration on NMEA 2000 backbones\u003c\/li\u003e\n\u003cli\u003e12V system power input range of 10 to 15.9 VDC, with a wiring harness that includes a 1A fuse\u003c\/li\u003e\n\u003cli\u003eEthernet connection to the MediaMaster source unit for on-screen control from the helm display\u003c\/li\u003e\n\u003cli\u003eWorks with supported JL Audio MediaMaster source units: MM105, MM105-HR, MM55, and MM55-HR\u003c\/li\u003e\n\u003cli\u003eCompatible with supported MFD platforms including Garmin, Simrad, B\u0026amp;G, and Lowrance displays\u003c\/li\u003e\n\u003cli\u003eMaximum current draw of 150 mA\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 port for software updates\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -20 C to +65 C (-4 F to +149 F)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000 network MFD data interface module\u003c\/li\u003e\n\u003cli\u003eWiring harness with 1A fuse\u003c\/li\u003e\n\u003cli\u003eFour stainless steel mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe module installs as a network device rather than a replacement stereo. It needs a powered NMEA 2000 network connection via the Micro-C port, and it also needs its power harness connected to a 12V DC supply within the 10 to 15.9 VDC input range.\u003c\/p\u003e\u003cp\u003ePlan for the usual NMEA 2000 hardware at the helm or behind it: a tee to add a drop, plus the right backbone and drop cables for your run. The USB port is used for software updates only.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis interface is for boats running a compatible JL Audio MediaMaster source unit and a compatible MFD that supports the on-screen control pages. The NMEA 2000 network carries the data between the helm and the module, while Ethernet links the module to the MediaMaster source unit.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm your MediaMaster model is one of the supported units and that your NMEA 2000 backbone has an open tee location and enough network power budget for a LEN 1 device.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eIt is a good match for boats where the stereo is mounted away from the helm, such as in a cabin, console, or equipment locker, and you still want quick access to zones and sources while docking or running offshore.\u003c\/p\u003e\u003cp\u003eThe low current draw and wide operating temperature range make it a sensible fit for typical helm electronics spaces when the mounting area is kept dry and the wiring is strain-relieved for vibration.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256225263797,"sku":"QBP103239","price":571.33,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284837_qbp103239.webp?v=1771286684"},{"product_id":"qbp104434","title":"JL Audio MMR-25W Wireless Remote Controller, For JL Audio MediaMaster MM55\/MM55-HR\/MM105\/MM105-HR, Bluetooth Low Energy, 35 ft Range, IP68, CR2032 Battery","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-03364-00 is a JL Audio MMR-25W wireless remote controller that gives you handheld control of a compatible MediaMaster source unit over Bluetooth, with an operating range up to 35 ft (11 m).\u003c\/p\u003e\u003cp\u003eIt carries an IP68 ingress protection rating and runs on a replaceable CR2032 (3V) coin cell, so it does not need to be tied into the boat’s 12V or 24V system. Operating temperature range is listed as -4°F to +140°F (-20°C to +60°C).\u003c\/p\u003e\u003cp\u003eIt’s a practical add-on when the head unit is tucked in the console or cabin and you still want quick access to volume, source, track, and zone control from the cockpit, bow seating, or transom.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWireless control for JL Audio MediaMaster MM55, MM55-HR, MM105, and MM105-HR source units\u003c\/li\u003e\n\u003cli\u003eBluetooth control link with range up to 35 ft (11 m) (range varies with battery level and installation environment)\u003c\/li\u003e\n\u003cli\u003eIP68-rated housing for wet marine areas; do not submerge or expose to high-pressure water spray\u003c\/li\u003e\n\u003cli\u003ePowered by a replaceable CR2032 (3V) coin\/button cell battery\u003c\/li\u003e\n\u003cli\u003eZone control with four zone LEDs, plus a zone lock function for keeping volume adjustments on the selected zone\u003c\/li\u003e\n\u003cli\u003eUp to eight remotes can be paired to a single source unit, within the unit’s total Bluetooth device capacity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe included cradle mounts to a flat surface with two screws, making it easy to stage the remote near the helm, at the cockpit entry, or by the aft seating. Choose a spot that’s easy to reach underway and avoid areas of extreme heat.\u003c\/p\u003e\u003cp\u003ePairing is handled from the source unit’s Remote Control pairing menu. Once pairing mode is active on the source unit, press and hold the remote’s Play\/Pause button for about 5 seconds until the zone LEDs flash, then exit pairing mode from the source unit.\u003c\/p\u003e\u003ch6\u003eCompatibility and control notes\u003c\/h6\u003e\u003cp\u003eControl behavior depends on the connected MediaMaster model and the active source. The remote covers common day-to-day functions such as power, source changes, play\/pause or mute, volume up\/down, track or favorite selection, and zone selection.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis remote is a good fit for boats where the main stereo is out of arm’s reach or where you regularly move between zones while underway. It’s also useful on larger vessels where you may want more than one remote available in different areas.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse off salt spray with fresh water and let it dry after heavy exposure. Keep the battery compartment fully secured, and replace the CR2032 battery when range starts to drop or response becomes inconsistent.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMMR-25W wireless remote controller\u003c\/li\u003e\n\u003cli\u003eCradle\u003c\/li\u003e\n\u003cli\u003e2 mounting screws\u003c\/li\u003e\n\u003cli\u003eWrist lanyard\u003c\/li\u003e\n\u003cli\u003eCR2032 (3V) battery\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256225329333,"sku":"QBP104434","price":107.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284842_qbp104434.webp?v=1771286685"},{"product_id":"qbp105633","title":"JL Audio MMC-SXM\/AUX SiriusXM to Stereo AUX Adapter Cable, For JL Audio MediaMaster, Not for MM80-HR, 2V RMS Input","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-13857-00 is an adapter cable that turns the SiriusXM connector on compatible JL Audio MediaMaster source units into a pair of analog stereo AUX inputs, with 2V RMS input sensitivity.\u003c\/p\u003e\u003cp\u003eIt is a simple way to add a hardwired line level audio feed at the helm, so you can bring sound in from devices that provide left and right analog output. It also keeps the rest of your system unchanged since it plugs into the head unit’s SiriusXM port rather than requiring modifications to the boat’s wiring.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConverts the SiriusXM connector on compatible MediaMaster source units into two analog AUX inputs.\u003c\/li\u003e\n\u003cli\u003eLeft and right RCA inputs for standard stereo line level connections.\u003c\/li\u003e\n\u003cli\u003e2V RMS input sensitivity for clean signal matching with typical AUX sources.\u003c\/li\u003e\n\u003cli\u003eRequires updated MediaMaster software for the AUX input function.\u003c\/li\u003e\n\u003cli\u003eNot compatible with MM80-HR.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is meant for MediaMaster source units that have a SiriusXM connector. Since it uses that port, it is intended for setups where the SiriusXM connection is being repurposed for an AUX input.\u003c\/p\u003e\u003cp\u003eIf your system is an MM80-HR, this adapter is not a match. For all other compatible MediaMaster units, verify you have access to the rear connection area and enough room to route the cable without tight bends or strain on the connectors.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the run so the AUX end reaches a dry, protected spot behind the dash or inside a console, away from washdown spray and areas that trap water. After connecting it to the head unit, connect your source’s left and right analog outputs to the RCA inputs and secure the cable so vibration does not work the plugs loose over time.\u003c\/p\u003e\u003cp\u003eBefore you head out, confirm the head unit is on updated MediaMaster software, then select the AUX input in the source list and set the source device volume to a steady line level for consistent listening on board.\u003c\/p\u003e\u003ch6\u003eWho this is for\u003c\/h6\u003e\u003cp\u003eThis is a good fit for boats that already run a MediaMaster head unit and want a dependable wired audio feed at the helm, such as a tablet docking setup, a TV audio output, or any other line level stereo source that you prefer to keep off Bluetooth while underway.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256225460405,"sku":"QBP105633","price":38.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284845_qbp105633.webp?v=1771286687"},{"product_id":"qbp105651","title":"JL Audio VeX Speaker Swivel Pipe Mount Brackets, 2.625in Clamp ID, 2pk, Black Finish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-13874-00 is a pipe-mount swivel clamp set for VeX enclosed speaker pods that fits 2.625 in round tubing. It is a clean way to mount a pair of pods to a wake tower, T-top frame, radar arch, or any other round tube where you need a secure hold and the ability to aim the speakers where people actually sit.\u003c\/p\u003e\u003cp\u003eThe clamp size is 2.625 in inner diameter and the swivel hardware lets you fine-tune the speaker angle by about +\/-30 degrees once the mounts are tightened down. When mounted, the enclosure sits about 5\/8 in off the pipe, which helps with clearance around welds, tower wraps, and cable exits.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2.625 in clamp size for round tube (2-5\/8 in outside diameter)\u003c\/li\u003e\n\u003cli\u003eSwivel adjustment of about +\/-30 degrees for aiming after installation\u003c\/li\u003e\n\u003cli\u003eMachined aluminum hardware with a black finish\u003c\/li\u003e\n\u003cli\u003eSold as a set to mount two VeX pods (one pair of speakers)\u003c\/li\u003e\n\u003cli\u003eLow-profile spacing keeps the enclosure about 5\/8 in off the pipe\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware and thread-locking compound for installations that see vibration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount set is used with VeX enclosed speaker systems, including PS650-VeX models, and is sized specifically for 2.625 in round pipe. Confirm your tube diameter with calipers or a precise wrap-and-measure method before ordering, since clamp fit is size-specific and not meant to stretch over larger tubing.\u003c\/p\u003e\u003cp\u003ePlan your mounting location so the enclosure clears tower bends, joints, and any canvas or bimini hardware. Leave room for the speaker wiring to route cleanly and add a drip loop so water does not follow the cable into connectors.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eWrap the protective strip on the tube where the clamp sits to help prevent scratching and to keep the mount from walking on polished or painted towers. Tighten fasteners evenly, use the supplied thread-locking compound, and re-check hardware after the first day on the water or any rough run where the tower sees a lot of shake.\u003c\/p\u003e\u003cp\u003eOnce the clamps are secure, use the swivel adjustment to point the pods toward the cockpit seating area instead of straight down the length of the boat. A small aim change can make a noticeable difference without needing to move the mounts.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the mounts with fresh water after saltwater use and wipe them down to keep the finish looking clean. Periodically inspect fasteners as part of your tower hardware check, especially if the boat is trailered often or stored outside in sun and spray.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256225493173,"sku":"QBP105651","price":250.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284846_qbp105651.jpg?v=1771286688"},{"product_id":"qbp106205","title":"JL Audio VeX Speaker Swivel Pipe Clamps, 2.75 in ID, for PS650-VeX, Pair","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-13875-00 is a swivel pipe-mount bracket set for VeX enclosed speaker systems, built around a 2.750 in inside-diameter clamp.\u003c\/p\u003e\u003cp\u003eIt is sold as a pair of mounting fixtures and one set is intended to mount two VeX pods, letting you hang the speakers from a wake tower, T-top frame, roll bar, or other 2.75 in tubing where deck space is tight.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSwivel pipe-mount bracket set for VeX enclosed speaker pods, including PS650-VeX applications\u003c\/li\u003e\n\u003cli\u003e2.750 in clamp inside diameter for round 2.75 in tower and hardtop tubing\u003c\/li\u003e\n\u003cli\u003eMounting fixtures that are machined with a low-profile shape for cleaner fit on crowded rails\u003c\/li\u003e\n\u003cli\u003eJL Audio name logo machined on the side for quick visual identification\u003c\/li\u003e\n\u003cli\u003eSold in pairs; each fixture set is intended to support two VeX pods\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount is size-specific. Measure the outside diameter of the tube you plan to clamp to and confirm it is 2.750 in. If your tubing is slightly oversized, has a heavy powder coat, or is not perfectly round, check fit before committing to a permanent speaker location.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe clamp wraps around the tube, so the mount can be installed without drilling into the tower or frame. Set the swivel angle so the pods aim where you actually listen, then tighten everything down and re-check after the first ride, since towers and tops see a lot of vibration.\u003c\/p\u003e\u003cp\u003ePlan your wiring route at the same time. Leave a drip loop, keep cables off sharp edges, and secure them so they cannot flap in the wind or chafe on fittings.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of mount is a good match for boats that already have 2.75 in tubing and run VeX pods on a wakeboard tower, hardtop, or overhead frame. It keeps the speakers up and out of the way and gives you control over where the sound is aimed, whether that is the cockpit, the bow lounge, or the swim platform.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the mount with fresh water after salt use and inspect the clamp hardware periodically. If your tower is anodized or powder-coated, a thin protective layer under the clamp can help prevent scuffs, and a quick snug-up check now and then helps avoid movement over time.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256225755317,"sku":"QBP106205","price":180.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284849_qbp106205.jpg?v=1771286690"},{"product_id":"qbp106356","title":"JL Audio VeX Pipe Mount Brackets, 2.875 in ID, Swivel, 2pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-13876-00 is a swivel pipe-mount bracket set for VeX enclosed speaker pods that clamps to 2.875 inch tubing on towers and roll cages. It is sold as a pair, and one set is intended to mount two VeX pods.\u003c\/p\u003e\u003cp\u003eOn boats with a wake tower, T-top, sport arch, or rail built from 2.875 inch outside diameter tube, this mount gives you a stable attachment point and a way to aim the pods before locking everything down.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePipe diameter fitment: 2.875 inch tubing\u003c\/li\u003e\n\u003cli\u003eSwivel pipe-mount fixture for VeX enclosed speaker systems\u003c\/li\u003e\n\u003cli\u003eSold as a pair; one set is intended to mount two VeX pods\u003c\/li\u003e\n\u003cli\u003eLow-profile, machined mounting fixtures for a tight, clean mount on the tube\u003c\/li\u003e\n\u003cli\u003eBlack finish that blends with most towers and hard tops\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit comes down to the tube size and the speaker pod format. Confirm your mounting tube is 2.875 inch outside diameter before ordering, especially if your tower is close to 2.75 inch or 3 inch sizing. This mount is meant for VeX pods and the matching enclosed system hardware, so it is not a universal clamp for every tower speaker.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMock up the pod location with the boat on the trailer and check clearances for bimini frames, board racks, folding towers, and rod holders. Tighten clamp hardware evenly from side to side so the halves draw together square on the tube, then re-check fasteners after the first day on the water.\u003c\/p\u003e\u003cp\u003ePlan your speaker wiring run along the tower so it is supported and protected from chafe, and leave a drip loop where the cable enters the pod area. If the boat sees saltwater or frequent washdowns, a fresh-water rinse and a quick fastener check during routine cleaning helps keep the install looking and working the way it should.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis bracket set is a solid match for wake and surf boats, pontoons, and center consoles running VeX pods on a tower or T-top and needing a 2.875 inch clamp point for a tidy install. It also makes sense as a replacement when an existing mount has been moved, scratched up, or needs a fresh hardware reset after a re-fit.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256225788085,"sku":"QBP106356","price":170.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284852_qbp106356.jpg?v=1771286691"},{"product_id":"qbp106385","title":"JL Audio MMR-20-BE Wired Remote Controller, For MediaMaster Source Units, Non-Display, IP67, 2 in Mount Hole, 75 ft Max Cable Run","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-03131-00 is a JL Audio MMR-20-BE wired remote controller that gives you direct control of a MediaMaster source unit from a second location on board.\u003c\/p\u003e\u003cp\u003eIt mounts in a 2-inch (50 mm) cutout with a round, one-hole layout and a 2.36-inch (60 mm) face. When properly installed, the control surface carries an IP67 water-resistance rating, and the backlit buttons and LED source indicators stay easy to read in full sun or at night.\u003c\/p\u003e\u003cp\u003eCable planning is the main fit check: each remote can be installed up to 75 ft (22.8 m) from the source unit (total cable length), and systems can be expanded to as many as three remotes on a single source unit with the appropriate splitter.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWired, non-display remote control for JL Audio MediaMaster source units, with dedicated buttons for power, source selection, volume, mute, play\/pause, and track or preset navigation\u003c\/li\u003e\n\u003cli\u003eIP67-rated control surface when properly installed; intended for normal marine exposure and washdowns, not for submersion or high-pressure spray\u003c\/li\u003e\n\u003cli\u003eInstalls in a 2-inch (50 mm) mounting hole; included hardware supports flat panels up to 1.5 inches (38 mm) thick\u003c\/li\u003e\n\u003cli\u003eBacklit controls with LED source indicators; backlight brightness is adjustable from the source unit settings\u003c\/li\u003e\n\u003cli\u003eUses a keyed 5-pin connector with a watertight, threaded collar for a locked-in connection\u003c\/li\u003e\n\u003cli\u003eRemote extension cables are available in 6 ft and 25 ft lengths, with up to 75 ft (22.8 m) total cable length per remote\u003c\/li\u003e\n\u003cli\u003eSupports multi-station control with up to three remotes on one source unit using an optional Y-splitter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting spot with both ergonomics and cable routing in mind. You will need rear access to tighten the hardware and to route the cable so it is supported and kept away from sharp edges or moving gear.\u003c\/p\u003e\u003cp\u003eCut a 2-inch (50 mm) hole, seat the gasket, and secure the remote using the included threaded studs and C-bracket. A lipped gasket comes preinstalled for most panels, and an optional flat gasket can be used when you want a lower-profile look.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis remote is made to work with JL Audio MediaMaster source units and connects using a compatible remote extension cable. If you are placing it at a second helm, in the cockpit, or near a transom bench, confirm the cable path first and keep connectors in locations that will not sit in standing water.\u003c\/p\u003e\u003ch6\u003eOn-board use\u003c\/h6\u003e\u003cp\u003eThe LED indicators show the active source, and the source button cycles through available sources (radio, USB, Bluetooth, AUX). Since the remote does not have a display, deeper browsing and tuner changes are handled at the main source unit, while the remote keeps the day-to-day controls within easy reach.\u003c\/p\u003e\u003cp\u003eThis is a good match for boats where the main head unit is out of arm’s reach while running, fishing, or entertaining, and you want quick control without moving between stations.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMMR-20-BE wired remote controller\u003c\/li\u003e\n\u003cli\u003eLipped gasket (preinstalled)\u003c\/li\u003e\n\u003cli\u003eFlat gasket (optional)\u003c\/li\u003e\n\u003cli\u003e2 stainless steel threaded studs\u003c\/li\u003e\n\u003cli\u003e4 stainless steel nuts (7 mm)\u003c\/li\u003e\n\u003cli\u003e4 stainless steel washers\u003c\/li\u003e\n\u003cli\u003eAluminum C-bracket\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256226082997,"sku":"QBP106385","price":193.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284855_qbp106385.webp?v=1771286692"},{"product_id":"qbp106415","title":"JL Audio MMR-5N2K NMEA 2000 Wired Remote Volume Controller, For JL Audio MediaMaster, IPX7","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-03134-00 is a JL Audio MMR-5N2K MediaMaster NMEA 2000 volume controller that adds an extra, networked volume knob for a compatible MediaMaster source unit. It connects via an NMEA 2000 Micro-C drop and carries an IPX7 water resistance rating (tested to 1 m for up to 30 minutes when properly installed).\u003c\/p\u003e\u003cp\u003eIt installs from the front of a flat panel and needs a single 1.5-inch (38 mm) cutout, with at least 2.35 inches (60 mm) square of flat surface for the trim ring. For wiring, it can interface with a vessel NMEA 2000 network using the appropriate cables and connectors (not included), or it can be wired directly to one MediaMaster source unit using MMC-PN2K powered network cables (sold separately) to create a small, stand-alone network.\u003c\/p\u003e\u003cp\u003eAll control comes from the connected MediaMaster. Volume changes apply across the stereo’s zones, and the knob press toggles mute and unmute, which is handy when you want quick control at the helm or in the cockpit without reaching for the main display.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000 Micro-C connection for networked remote volume control with compatible MediaMaster source units\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 certified with LEN 2 for straightforward network load planning\u003c\/li\u003e\n\u003cli\u003eIPX7 water resistance rating (tested to 1 m for up to 30 minutes when properly installed)\u003c\/li\u003e\n\u003cli\u003eFront-mount panel installation with a 1.5-inch (38 mm) cutout requirement\u003c\/li\u003e\n\u003cli\u003eSingle knob adjusts system volume across audio zones; press once for mute and unmute\u003c\/li\u003e\n\u003cli\u003eWhite LED status ring for at-a-glance feedback, with adjustable brightness settings\u003c\/li\u003e\n\u003cli\u003eIntended for use with one MediaMaster source unit only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMMR-5N2K main body\u003c\/li\u003e\n\u003cli\u003eVolume knob\u003c\/li\u003e\n\u003cli\u003eTrim ring\u003c\/li\u003e\n\u003cli\u003eFlat gasket (preinstalled)\u003c\/li\u003e\n\u003cli\u003eMounting screws (2)\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis controller is made to work with JL Audio MediaMaster source units, including MM105, MM100s-BE, MM100s, MM80-HR, and MM50. It should be connected to a single MediaMaster source unit through an NMEA 2000 network (full vessel network or a stand-alone powered network cable setup).\u003c\/p\u003e\u003cp\u003eFor zone behavior, the host stereo’s zone level control mode needs to be set to Relative or Variable. Once connected, volume adjustments act across all zones together.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount it in a flat panel where you can reach the back side for the connector and cable routing, and avoid areas of extreme heat. Cut a 1.5-inch (38 mm) hole, position the unit with the alignment arrow at the 12 o’clock position, then mark and drill the pilot holes for the two mounting screws.\u003c\/p\u003e\u003cp\u003eAfter securing the body, press the trim ring on with the JL Audio logo oriented at the top, then install the keyed volume knob. Plan the cable path before drilling and secure wiring so it cannot chafe or move with vibration.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThe LED ring gives simple feedback during normal use: solid on indicates a compatible source is detected, a repeating two-flash pattern indicates no compatible source is detected, and a slow pulse indicates the system is muted. LED ring brightness can be set from the controller, which helps when moving between night runs and full-sun days.\u003c\/p\u003e\u003cp\u003eThis is a good match for boats where the MediaMaster head unit is mounted away from where people actually listen, such as a helm stereo with cockpit speakers, or a cabin source unit with a second control point in the cockpit.\u003c\/p\u003e\u003ch6\u003eEnvironmental notes\u003c\/h6\u003e\u003cp\u003eIPX7 water resistance covers washdowns and heavy spray when installed correctly, but it is not meant for prolonged submersion or situations that create pressure beyond its depth rating. On saltwater boats, a quick fresh-water rinse after a rough day helps keep the bezel and knob turning smoothly.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256226115765,"sku":"QBP106415","price":193.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284859_qbp106415.webp?v=1771286693"},{"product_id":"qbp107462","title":"JL Audio MVi-HUB JLid Network Hub, For MVi Amplifiers, IPX2","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-03342-00 is the JL Audio MVi-HUB, a JLid communication and network bridge used to link JL Audio MVi amplifier systems so they can be configured and tuned as one network. It measures 3.98 in (101 mm) high, 11.21 in (285 mm) wide, and 2.05 in (52 mm) deep, with an IPX2 dust and water rating when properly installed.\u003c\/p\u003e\u003cp\u003eIn a multi-amp install, the hub brings all connected amplifiers into a single TüN session and keeps DSP presets synchronized across the network. It is powered through the JLid connection to the amplifiers, so there is no separate power feed or remote turn-on wire to run, and operation requires at least one Master MVi amplifier connection.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBrings a network of amplifiers into one TüN tuning session and synchronizes DSP presets across the system.\u003c\/li\u003e\n\u003cli\u003eJLid-COMM connections support 1 Master input and 5 Slave outputs for up to six amplifiers on one hub.\u003c\/li\u003e\n\u003cli\u003eUses standard CAT5e cables for JLid-COMM links, which keeps multi-amp wiring straightforward.\u003c\/li\u003e\n\u003cli\u003ePowered via the JLid connection to the amplifiers, so it does not require separate power or turn-on wiring.\u003c\/li\u003e\n\u003cli\u003eJLid-CTRL accessory port for an optional Digital Remote Controller, with networked commands distributed across connected amplifiers (functionality varies by model).\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 port for software updates only.\u003c\/li\u003e\n\u003cli\u003ePower input: 5 VDC.\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 Micro-C port is present but currently not used and is intended for future development.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNetwork hub\u003c\/li\u003e\n\u003cli\u003eTwo mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis hub is for JL Audio MVi amplifier networks where you want one place to manage communication between amplifiers during setup and tuning. It supports one Master MVi amplifier connection and up to five additional amplifiers connected as Slaves through the JLid-COMM ports.\u003c\/p\u003e\u003cp\u003ePlan space for the 11.21 in (285 mm) width and leave room for cable bend radius. For best real-world longevity on a boat, mount it in a protected area such as behind the helm, inside a console, or in an equipment locker rather than in an exposed spray zone.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe hub mounts with two screws and is typically installed close enough to keep cable runs tidy between amplifiers. JLid-COMM connections are made with standard CAT5e cables, which makes it practical to route through rigging tubes and service loops if you keep them secured against vibration and chafe.\u003c\/p\u003e\u003cp\u003eOnce the network is built, tuning is handled as a single amplifier network. Status indicators on the unit help identify connected amplifiers during setup.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe unit is powered through the JLid connection to the amplifier network and lists a 5 VDC power input. The USB 2.0 port is for software updates only. The built-in NMEA 2000 Micro-C connection is currently not used, so it should not be counted on as an active NMEA 2000 interface in system planning.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a solid fit for boats running multiple JL Audio amplifiers where system-wide tuning and coordinated DSP presets matter, such as larger center consoles, wake boats, and cruisers with multiple listening zones. It also makes sense when an optional remote controller is being used for shared volume and zone-type commands across the network.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eIPX2 is suitable for incidental moisture when properly installed, but it is still best treated as an in-console component. Keep connectors supported with strain relief, avoid leaving cable ends exposed during service, and re-check fasteners and cable ties after the first few trips when vibration has had time to settle the install.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256226181301,"sku":"QBP107462","price":530.42,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284860_qbp107462.webp?v=1771286695"},{"product_id":"qbp107975","title":"JL Audio XMD-WHTANT-AM\/FM Hideaway AM\/FM Antenna, For MM100s-BE\/MM50, White Finish, Motorola-Type Male Plug","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-13555-00 is a hideaway AM\/FM radio antenna that plugs into a stereo using a standard Motorola-type male connector. It is meant for marine installs where the antenna lives inside the boat, and it works with most aftermarket head units, including JL Audio MediaMaster units such as the MM100s-BE and MM50.\u003c\/p\u003e\u003cp\u003eBecause the antenna sits out of sight, it fits clean helm layouts where you do not want a deck-mounted whip or an exterior mount that gets bumped, snagged, or exposed to constant spray.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHideaway AM\/FM antenna format for installations that keep the antenna inside the boat\u003c\/li\u003e\n\u003cli\u003eStandard Motorola-type male plug for common AM\/FM radio inputs\u003c\/li\u003e\n\u003cli\u003eCompatible with most aftermarket head units, including JL Audio MM100s-BE and MM50\u003c\/li\u003e\n\u003cli\u003eConstruction intended for real saltwater environments\u003c\/li\u003e\n\u003cli\u003eWhite antenna finish that stays subtle in light-colored consoles and liners\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and placement\u003c\/h6\u003e\u003cp\u003ePlan the install so the antenna can sit undisturbed and the lead can be routed back to the head unit without sharp bends or pinch points. Common mounting spots include behind the helm, inside a console, or under a hardtop liner.\u003c\/p\u003e\u003cp\u003eReception is usually best when the antenna is kept away from large metal surfaces, high-current power runs, and other antenna leads. If you are troubleshooting weak reception, start by checking placement and the connector seating at the back of the stereo.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis antenna is for stereos that accept an AM\/FM antenna connection with a Motorola-style female socket. If your head unit uses a different style of antenna input, you will need the correct adapter at the radio end.\u003c\/p\u003e\u003ch6\u003eWho it suits on board\u003c\/h6\u003e\u003cp\u003eThis is a practical match for runabouts, pontoons, and center consoles that cruise near shore and still want local AM\/FM stations, while keeping the antenna protected and out of the way.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256226246837,"sku":"QBP107975","price":34.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284865_qbp107975.webp?v=1771286696"},{"product_id":"qbp108248","title":"JL Audio Panel-Mount USB-C\/USB-A Charging Jack, 5V\/2.1A","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-13623-00 is a JL Audio USB-C and USB-A charging jack that mounts through a panel to add a fixed charging point on board. It supplies 5 V charging up to 2.1 A and has a blue LED that lights when the port is powered.\u003c\/p\u003e\u003cp\u003eIt installs in a 1.125\" cutout and clamps to a flat surface up to 1.25\" thick with a rear wing nut. A rubber cover seals the face when the ports are not in use, and the attached cable is 6' (1.83 m) long to help reach your power feed. Your device charging cable is not included.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePanel-mount charging point with one USB-C port and one USB-A port on the face\u003c\/li\u003e\n\u003cli\u003e5 V output charging up to 2.1 A for phones, tablets, and other USB-powered electronics\u003c\/li\u003e\n\u003cli\u003eBlue LED indicates when power is active, so you can see at a glance that the circuit is on\u003c\/li\u003e\n\u003cli\u003eFits a 1.125\" mounting hole and clamps to flat panels up to 1.25\" thick\u003c\/li\u003e\n\u003cli\u003eRubber cover closes over the ports to keep spray and grit out when not charging\u003c\/li\u003e\n\u003cli\u003e6' (1.83 m) overall cable length for flexible routing behind the dash or cabinetry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eUSB-C and USB-A panel-mount charging jack with attached 6' (1.83 m) cable\u003c\/li\u003e\n\u003cli\u003eRubber protective cover\u003c\/li\u003e\n\u003cli\u003eRear wing nut for clamping to the mounting surface\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a good fit anywhere you can drill a clean 1.125\" hole and access the back side to tighten the wing nut. Leave enough clearance behind the panel for the body of the jack and for the cable bend radius so the wiring does not get pinched when you secure it.\u003c\/p\u003e\u003cp\u003eThe front ports accept standard USB-A and USB-C device cables. Keep in mind the unit is a charging point only, so it is meant for powering devices rather than handling audio or data connections.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eDrill the 1.125\" cutout, insert the jack from the front, then tighten the wing nut from the back until it is snug and stable. Route the cable away from sharp edges and moving parts, and tie it off so vibration does not work the wiring loose over time.\u003c\/p\u003e\u003cp\u003eConnect it to your boat’s DC system using an appropriately fused circuit and clean, secure terminations. Once powered, the blue LED confirms the port is live before you plug in devices.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis setup makes sense at the helm for a phone running charts, in the cabin for tablets and e-readers, or near a berth for overnight charging. It also works well on boats that have a mix of older USB-A cables and newer USB-C cables in daily use.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eClose the rubber cover whenever the ports are not being used, especially in open cockpits and on boats that see salt spray. If the face gets salt or grime on it, wipe it down with fresh water and a soft cloth and check occasionally that the mounting nut remains snug.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256226279605,"sku":"QBP108248","price":99.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284866_qbp108248.jpg?v=1771286698"},{"product_id":"qbp422736","title":"JL Audio M3 Marine Coaxial Speakers, 2-Way, 4 Ohm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio M3 Marine Speakers is a range of 4 O marine speakers offered in 6.5-inch and 7.7-inch sizes, with grille and lighting options that let you match the look of your boat. The flush-mount coaxial versions handle 60 W continuous (6.5-inch, 55 Hz to 25 kHz) or 70 W continuous (7.7-inch, 45 Hz to 25 kHz), and they fit standard cutouts of 5.00 to 5.25 in (127 to 133 mm) or 6.25 in (159 mm).\u003c\/p\u003e\u003cp\u003eFor planning your install, allow 2.78 in (71 mm) of mounting depth for the 6.5-inch speakers or 3.17 in (81 mm) for the 7.7-inch speakers. If your mounting location sees spray or rain, the front of the speaker is protected when installed correctly, but the rear of the speaker and the wiring are not waterproof. Keep the back side dry, avoid mounting where water can collect, and do not submerge or blast the speakers with high-pressure washdown.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4 O nominal impedance across the range for common marine stereo and amplifier setups\u003c\/li\u003e\n\u003cli\u003e6.5-inch coaxial format: 60 W continuous power handling, 55 Hz to 25 kHz (±3 dB), 5.00 to 5.25 in (127 to 133 mm) cutout, 2.78 in (71 mm) mounting depth\u003c\/li\u003e\n\u003cli\u003e7.7-inch coaxial format: 70 W continuous power handling, 45 Hz to 25 kHz (±3 dB), 6.25 in (159 mm) cutout, 3.17 in (81 mm) mounting depth\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power per channel: 20 to 120 W (6.5-inch) or 20 to 140 W (7.7-inch)\u003c\/li\u003e\n\u003cli\u003eOptional integrated RGB LED illumination on select versions with separate 12 V wiring per speaker (10 to 14.4 V DC) and an inline fast-blow fuse rated at 150 mA per speaker for the LED feed\u003c\/li\u003e\n\u003cli\u003e7.7-inch enclosed system option for pipe-style mounting with an enclosure diameter of 7.70 in (196 mm) and about 12.6 in (321 to 323 mm) of depth, with mounting fixtures required (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range includes 6.5-inch and 7.7-inch sizes, with grille choices in White Classic, White Sport, and Gray Sport depending on size.\u003c\/p\u003e\u003cp\u003eSome versions add RGB illumination, which means you will run a separate fused 12 V feed for the lighting at each speaker location. The 7.7-inch size is also offered as an enclosed system for installations where a self-contained speaker pod and a mounting fixture make more sense than a flush cutout.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFor flush-mount installs, confirm you have the right cutout size for the speaker you are ordering, and make sure there is enough clearance behind the panel for the listed mounting depth plus wiring and strain relief. A flat, vertical mounting surface helps the gasket seal and keeps water from pooling on the grille.\u003c\/p\u003e\u003cp\u003eIf you are mounting into fiberglass, pilot hole sizing for #8 fasteners is 7\/64 in for fiberglass 0.125 in thick or less, or 1\/8 in for fiberglass more than 0.125 in thick. Before drilling or cutting, check for hoses, harnesses, and structure behind the surface, and mount the speakers securely so they stay put in chop and vibration.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThese speakers present a 4 O load and work well with typical marine head units and external amplifiers when you stay within the recommended per-channel power range for the size you install. Turn the audio system off before making connections, and protect all terminals and splices so they cannot short to ground or each other in a damp marine environment.\u003c\/p\u003e\u003ch6\u003eRGB lighting setup\u003c\/h6\u003e\u003cp\u003eRGB-equipped versions require separate 12 V wiring at each speaker location for the lighting circuit. Place an inline fast-blow fuse on the positive LED feed at the power source end of the LED wiring for each speaker, using the 150 mA fuse value specified for these models.\u003c\/p\u003e\u003cp\u003eThe wiring can be set up for fixed colors by combining the lighting leads, or you can use an RGB lighting controller for adjustable control. Check local waterway regulations before using accent or speaker lighting on your vessel.\u003c\/p\u003e\u003ch6\u003eEnclosed system mounting\u003c\/h6\u003e\u003cp\u003eThe 7.7-inch enclosed system versions use a dedicated enclosure and require matching mounting fixtures (sold separately). Swivel-style fixtures are intended for horizontal pipes, and the enclosure should be mounted directly above or directly below the pipe.\u003c\/p\u003e\u003cp\u003ePlan for the physical envelope of the enclosure when placing it on a hardtop, T-top, arch, or tower. The enclosure depth is about 12.62 in (321 mm) for Classic and 12.69 in (323 mm) for Sport, so clearance matters for rotation, wiring, and nearby canvas or rails.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThe flush-mount speakers are a good fit for cockpit side panels, cabin bulkheads, or helm seating areas where you want a clean cutout install and solid output from moderate amplifier power. The enclosed system versions make sense when you need a speaker pod on a pipe-mounted location, such as an arch or tower, and you want to keep the installation tidy and secure.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"7.7\" Enclosed System \/ Yes \/ Gray Sport","offer_id":52262472253621,"sku":"QBP422736-V1","price":787.56,"currency_code":"USD","in_stock":false},{"title":"6.5\" \/ Yes \/ White Sport","offer_id":52262472286389,"sku":"QBP422736-V2","price":262.5,"currency_code":"USD","in_stock":false},{"title":"6.5\" \/ Yes \/ Gray Sport","offer_id":52262472319157,"sku":"QBP422736-V3","price":287.91,"currency_code":"USD","in_stock":false},{"title":"6.5\" \/ No \/ White Classic","offer_id":52262472351925,"sku":"QBP422736-V4","price":203.22,"currency_code":"USD","in_stock":false},{"title":"6.5\" \/ No \/ White Sport","offer_id":52262472384693,"sku":"QBP422736-V5","price":220.16,"currency_code":"USD","in_stock":false},{"title":"6.5\" \/ No \/ Gray Sport","offer_id":52262472417461,"sku":"QBP422736-V6","price":245.57,"currency_code":"USD","in_stock":false},{"title":"7.7\" \/ No \/ White Classic","offer_id":52262472450229,"sku":"QBP422736-V7","price":313.32,"currency_code":"USD","in_stock":false},{"title":"7.7\" \/ No \/ White Sport","offer_id":52262472482997,"sku":"QBP422736-V8","price":330.26,"currency_code":"USD","in_stock":false},{"title":"7.7\" \/ Yes \/ White Sport","offer_id":52262472515765,"sku":"QBP422736-V9","price":372.6,"currency_code":"USD","in_stock":false},{"title":"7.7\" \/ No \/ Gray Sport","offer_id":52262472548533,"sku":"QBP422736-V10","price":355.66,"currency_code":"USD","in_stock":false},{"title":"7.7\" \/ Yes \/ Gray Sport","offer_id":52262472581301,"sku":"QBP422736-V11","price":398.01,"currency_code":"USD","in_stock":false},{"title":"7.7\" Enclosed System \/ No \/ White Classic","offer_id":52262472614069,"sku":"QBP422736-V12","price":719.81,"currency_code":"USD","in_stock":false},{"title":"7.7\" Enclosed System \/ No \/ White Sport","offer_id":52262472646837,"sku":"QBP422736-V13","price":719.81,"currency_code":"USD","in_stock":false},{"title":"7.7\" Enclosed System \/ Yes \/ White Sport","offer_id":52262472679605,"sku":"QBP422736-V14","price":762.15,"currency_code":"USD","in_stock":false},{"title":"7.7\" Enclosed System \/ No \/ Gray Sport","offer_id":52262472712373,"sku":"QBP422736-V15","price":745.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1293812_qbp422736.webp?v=1771364689"},{"product_id":"qbp422873","title":"JL Audio M3 VeX 6.5 in Enclosed Coaxial Speakers, 60W RMS, 4 Ohm, Pair","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio M3-650VEX VeX enclosed speaker system is a pair of 6.5 in coaxial speaker pods for open-air sound on boats where you want tower-style speakers without cutting into fiberglass. Each pod presents a 4 ohm load and is rated at 60 W continuous RMS per channel, with a frequency response of 100 Hz to 25 kHz.\u003c\/p\u003e\u003cp\u003eThe enclosure measures 7.03 in in diameter and 6.16 in in depth, which helps when you are checking clearance on a wake tower, T-top, hardtop overhang, or rail mount. Some versions add integrated RGB LED accent lighting, using a separate 10 to 14.4 V DC lighting feed (not for 24 V systems).\u003c\/p\u003e\u003cp\u003eMounting is handled through the VeX receiver system, so you pair the pod with compatible mounting fixtures (sold separately) and aim the speakers where people actually sit in the cockpit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eEnclosed 6.5 in M3 coaxial speaker pods (sold as a pair) for exposed mounting locations\u003c\/li\u003e\n\u003cli\u003e4 ohm system impedance and 60 W RMS continuous power handling per channel\u003c\/li\u003e\n\u003cli\u003eCompact pod size: 7.03 in diameter and 6.16 in depth for easier fit checks on towers and hardtops\u003c\/li\u003e\n\u003cli\u003eRotating receiver built into each pod for aiming, used with compatible mounting fixtures (sold separately)\u003c\/li\u003e\n\u003cli\u003eRGB LED versions use a separate 10 to 14.4 V DC lighting connection and should not be tied into 24 V circuits or navigation light circuits\u003c\/li\u003e\n\u003cli\u003eSport grille styling options to match white or darker topsides and hardware themes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis system is offered in multiple configurations so you can match the grille style and decide whether you want RGB accent lighting.\u003c\/p\u003e\u003cp\u003eAcross the range, the grille color\/style and LED lighting option change. The core speaker format remains the M3 6.5 in enclosed system (7.03 in diameter, 6.16 in depth) with a 4 ohm load and 60 W RMS continuous power handling per channel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-03256-00: LED lighting: None; Grille color\/style: White Sport. This keeps wiring to standard speaker leads and gives a bright look that stands out on white gelcoat and light-colored canvas.\u003c\/li\u003e\n\u003cli\u003e010-03257-00: LED lighting: None; Grille color\/style: Gray Sport. This keeps wiring to standard speaker leads and suits darker towers, hardtops, and black hardware themes.\u003c\/li\u003e\n\u003cli\u003e010-03259-00: LED lighting: RGB LED; Grille color\/style: Gray Sport. This adds RGB accent lighting with separate lighting leads, useful when you want cockpit mood lighting at anchor or at the dock.\u003c\/li\u003e\n\u003cli\u003e010-03258-00: LED lighting: RGB LED; Grille color\/style: White Sport. This adds RGB accent lighting while keeping the white sport grille appearance for boats with lighter finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eEach pod uses the VeX receiver interface and requires compatible mounting fixtures (sold separately) for tube or surface installs. Plan the mount so the speaker can be aimed at the seating area and so the pod clears bimini frames, antennas, and handholds through its full swivel range.\u003c\/p\u003e\u003cp\u003eAudio wiring is straightforward speaker cable to a 4 ohm load. For best results, match the amplifier to the recommended 20 to 120 W RMS per channel range and use marine-grade terminations with heat-shrink where connections live in wet lockers or on exposed towers.\u003c\/p\u003e\u003cp\u003eRGB LED versions add lighting connections that need a switched 10 to 14.4 V DC supply and ground (or an RGB controller). A small fuse at each speaker lighting feed is recommended for short-circuit protection, and the lighting circuit should stay separate from navigation lighting circuits.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThese pods make sense when you want sound directed into an open cockpit, aft lounge, or transom area, especially on boats used for water sports. With the 7.03 in diameter and 6.16 in depth, confirm you have room for both the pod and the mounting fixture hardware before ordering clamps.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue off the grilles after runs and avoid harsh solvents on the finish. Recheck mounting fasteners and cable strain relief periodically so the pods stay quiet and properly aimed when the boat is pounding or trailering.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"None \/ White Sport","offer_id":52262472745141,"sku":"QBP422873-V1","price":491.16,"currency_code":"USD","in_stock":false},{"title":"None \/ Gray Sport","offer_id":52262472777909,"sku":"QBP422873-V2","price":491.16,"currency_code":"USD","in_stock":false},{"title":"RGB LED \/ Gray Sport","offer_id":52262472810677,"sku":"QBP422873-V3","price":550.44,"currency_code":"USD","in_stock":false},{"title":"RGB LED \/ White Sport","offer_id":52262472843445,"sku":"QBP422873-V4","price":533.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1293877_qbp422873.webp?v=1771364693"},{"product_id":"qbp424532","title":"JL Audio M6 Marine Speakers, 4 O, 3-Year Warranty","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio M6 is a family of marine speakers and component tweeters that covers 6.5 inch, 7.7 inch, and 8.8 inch coaxials plus a 1 inch tweeter option, with select configurations adding Transflective LED lighting. The coaxial speaker sizes are rated 75 W RMS (6.5), 100 W RMS (7.7), and 125 W RMS (8.8) at a nominal 4 ohms, which makes them a straightforward match for most marine amplifiers wired for 4 ohm loads.\u003c\/p\u003e\u003cp\u003eThis range includes standard in-cutout speakers for cabins, cockpits, and helm panels, along with enclosed system versions for 7.7 inch and 8.8 inch sizes when you need a weatherproof housing on a wake tower or arch. Grille style and color vary across the line so you can match the look of your boat without changing the core approach to installation and wiring.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFour size paths in one family: 1 inch component tweeter, 6.5 inch coaxial, 7.7 inch coaxial, and 8.8 inch coaxial (with enclosed system options on select 7.7 inch and 8.8 inch models).\u003c\/li\u003e\n\u003cli\u003eTransflective LED lighting offered on certain configurations for color accent lighting that glows through the speaker cone, with non-LED versions available for a clean, unlit look.\u003c\/li\u003e\n\u003cli\u003eNominal 4 ohm coaxial speakers across the 6.5 inch, 7.7 inch, and 8.8 inch sizes for easy amplifier pairing in typical marine audio systems.\u003c\/li\u003e\n\u003cli\u003ePower handling by size for coaxial models: 75 W RMS (6.5), 100 W RMS (7.7), and 125 W RMS (8.8).\u003c\/li\u003e\n\u003cli\u003e1 inch component tweeter option with a dedicated crossover and mounting support for flush or surface installs at the helm or in a cockpit coaming.\u003c\/li\u003e\n\u003cli\u003eGrille choices that change the finished look: Classic, Sport, and Luxe styling in colors that include white, titanium, gray, and black (availability depends on size and lighting option).\u003c\/li\u003e\n\u003cli\u003eEnclosed system versions for open-air mounting where there is no cutout behind the speaker, such as towers, arches, and hardtops.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations to match different mounting locations and the look you want on board.\u003c\/p\u003e\u003cp\u003eOptions vary by speaker size (including a 1 inch tweeter option), enclosed system versus in-cutout mounting on certain sizes, Transflective LED lighting yes or no, and grille color and style.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eStart by confirming where the speakers will live on your boat. In-cutout coaxial installs need a cutout that matches the chosen size and enough clearance behind the panel for the motor structure and wiring. On refits, measure the existing cutout and mounting depth before ordering, especially when stepping up from a common 6.5 inch opening to 7.7 inch or 8.8 inch.\u003c\/p\u003e\u003cp\u003eFor tower or arch installs, the enclosed system versions are meant for exposed, open-air mounting where there is no cavity behind the speaker. Mounting hardware selection depends on your tower diameter and layout, so confirm clamp or bracket compatibility with your specific structure.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eRun speaker cable sized for your amplifier power and the cable length, and use marine-grade terminations that are sealed with adhesive-lined heat shrink. Keep audio cabling separated from high-current runs where possible, and avoid bundling speaker wiring tightly with sensitive antenna or sonar cables.\u003c\/p\u003e\u003cp\u003eOn LED configurations, treat the lighting wiring as a separate circuit from the speaker audio leads. Plan a clean route to your lighting controller or switching, and place connections where they stay dry and accessible for service.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThese configurations fit a wide range of boats, from center consoles that need speakers that stay clear in the wind to cruisers that want fuller sound in the cockpit at anchor. The enclosed system versions make sense when you want sound up high on a wake boat tower or an arch where spray, sun, and vibration are part of normal life.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater runs, a gentle freshwater rinse helps keep the grille and mounting hardware looking clean. Avoid harsh solvents on the grilles and around the cone, and give the mounting screws a quick check after the first few outings to make sure everything has seated properly.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"6.5\" \/ Yes \/ Titanium Sport","offer_id":52262473367733,"sku":"QBP424532-V1","price":538.89,"currency_code":"USD","in_stock":false},{"title":"1\" \/ No \/ Titanium Sport","offer_id":52262473400501,"sku":"QBP424532-V2","price":177.06,"currency_code":"USD","in_stock":false},{"title":"1\" \/ No \/ White Sport","offer_id":52262473433269,"sku":"QBP424532-V3","price":177.06,"currency_code":"USD","in_stock":false},{"title":"1\" \/ No \/ Gray Sport","offer_id":52262473466037,"sku":"QBP424532-V4","price":192.44,"currency_code":"USD","in_stock":false},{"title":"7.7\" \/ No \/ White Classic","offer_id":52262473498805,"sku":"QBP424532-V5","price":561.99,"currency_code":"USD","in_stock":false},{"title":"7.7\" \/ No \/ White Luxe","offer_id":52262473531573,"sku":"QBP424532-V6","price":384.92,"currency_code":"USD","in_stock":false},{"title":"7.7\" \/ No \/ White Sport","offer_id":52262473564341,"sku":"QBP424532-V7","price":561.99,"currency_code":"USD","in_stock":false},{"title":"7.7\" \/ No \/ Titanium Sport","offer_id":52262473597109,"sku":"QBP424532-V8","price":577.37,"currency_code":"USD","in_stock":false},{"title":"7.7\" \/ No \/ Black Luxe","offer_id":52262473629877,"sku":"QBP424532-V9","price":384.92,"currency_code":"USD","in_stock":false},{"title":"7.7\" \/ Yes \/ White Sport","offer_id":52262473662645,"sku":"QBP424532-V10","price":600.47,"currency_code":"USD","in_stock":false},{"title":"7.7\" \/ Yes \/ Titanium Sport","offer_id":52262473695413,"sku":"QBP424532-V11","price":615.87,"currency_code":"USD","in_stock":false},{"title":"8.8\" \/ No \/ White Classic","offer_id":52262473728181,"sku":"QBP424532-V12","price":638.97,"currency_code":"USD","in_stock":false},{"title":"8.8\" \/ No \/ White Luxe","offer_id":52262473760949,"sku":"QBP424532-V13","price":423.4,"currency_code":"USD","in_stock":false},{"title":"8.8\" \/ No \/ White Sport","offer_id":52262473793717,"sku":"QBP424532-V14","price":638.97,"currency_code":"USD","in_stock":false},{"title":"8.8\" \/ No \/ Titanium Sport","offer_id":52262473826485,"sku":"QBP424532-V15","price":654.36,"currency_code":"USD","in_stock":false},{"title":"8.8\" \/ No \/ Black Luxe","offer_id":52262473859253,"sku":"QBP424532-V16","price":422.09,"currency_code":"USD","in_stock":false},{"title":"8.8\" \/ Yes \/ White Sport","offer_id":52262473892021,"sku":"QBP424532-V17","price":677.46,"currency_code":"USD","in_stock":false},{"title":"8.8\" \/ Yes \/ Titanium Sport","offer_id":52262473924789,"sku":"QBP424532-V18","price":692.86,"currency_code":"USD","in_stock":false},{"title":"7.7\" Enclosed System \/ No \/ White Classic","offer_id":52262473957557,"sku":"QBP424532-V19","price":846.83,"currency_code":"USD","in_stock":false},{"title":"7.7\" Enclosed System \/ No \/ White Sport","offer_id":52262473990325,"sku":"QBP424532-V20","price":846.83,"currency_code":"USD","in_stock":false},{"title":"7.7\" Enclosed System \/ No \/ Titanium Sport","offer_id":52262474023093,"sku":"QBP424532-V21","price":846.83,"currency_code":"USD","in_stock":false},{"title":"7.7\" Enclosed System \/ Yes \/ White Sport","offer_id":52262474055861,"sku":"QBP424532-V22","price":885.32,"currency_code":"USD","in_stock":false},{"title":"7.7\" Enclosed System \/ Yes \/ Titanium Sport","offer_id":52262474088629,"sku":"QBP424532-V23","price":885.32,"currency_code":"USD","in_stock":false},{"title":"8.8\" Enclosed System \/ No \/ White Classic","offer_id":52262474121397,"sku":"QBP424532-V24","price":1193.26,"currency_code":"USD","in_stock":false},{"title":"8.8\" Enclosed System \/ No \/ White Sport","offer_id":52262474154165,"sku":"QBP424532-V25","price":1193.26,"currency_code":"USD","in_stock":false},{"title":"8.8\" Enclosed System \/ No \/ Titanium Sport","offer_id":52262474186933,"sku":"QBP424532-V26","price":1231.76,"currency_code":"USD","in_stock":false},{"title":"8.8\" Enclosed System \/ Yes \/ White Sport","offer_id":52262474219701,"sku":"QBP424532-V27","price":1231.76,"currency_code":"USD","in_stock":false},{"title":"8.8\" Enclosed System \/ Yes \/ Titanium Sport","offer_id":52262474252469,"sku":"QBP424532-V28","price":1270.25,"currency_code":"USD","in_stock":false},{"title":"6.5\" \/ No \/ White Sport","offer_id":52262474285237,"sku":"QBP424532-V29","price":485.0,"currency_code":"USD","in_stock":false},{"title":"6.5\" \/ No \/ White Classic","offer_id":52262474318005,"sku":"QBP424532-V30","price":485.0,"currency_code":"USD","in_stock":false},{"title":"6.5\" \/ No \/ White Luxe","offer_id":52262474350773,"sku":"QBP424532-V31","price":346.42,"currency_code":"USD","in_stock":false},{"title":"6.5\" \/ No \/ Titanium Sport","offer_id":52262474383541,"sku":"QBP424532-V32","price":500.39,"currency_code":"USD","in_stock":false},{"title":"6.5\" \/ No \/ Black Luxe","offer_id":52262474416309,"sku":"QBP424532-V33","price":346.42,"currency_code":"USD","in_stock":false},{"title":"6.5\" \/ Yes \/ White Sport","offer_id":52262474449077,"sku":"QBP424532-V34","price":523.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1293948_qbp424532.jpg?v=1771364704"},{"product_id":"qbp424692","title":"JL Audio XDM Car and Marine Amplifier, Class D, NexD Switching, Dual-Mode Input Filter","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio XDM is a line of Class D car and marine audio amplifiers for powering speakers and subwoofers on board without giving up a lot of mounting space. Across the range, you will find 1 to 8 channel configurations with total power ratings from 200 W up to 1000 W, including models intended for 12 V systems and specific versions intended for 24 V systems.\u003c\/p\u003e\u003cp\u003eThis amplifier family is built around noise rejection that matters on boats, where long cable runs and charging systems can introduce hum. Setup access is straightforward because the controls sit on top under a gasketed, removable cover, so it can be mounted under a seat, inside a console, or behind a bulkhead while still staying serviceable.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eClass D design using high-speed switching technology to keep heat and current draw in check in tight mounting locations.\u003c\/li\u003e\n\u003cli\u003eDual-mode input filtering with differential-balanced inputs to help reduce alternator and ignition noise that can show up in marine installs.\u003c\/li\u003e\n\u003cli\u003eBuilt-in 12 dB per octave filtering on channel banks with selectable high-pass or low-pass operation and adjustable cutoff from 50 to 500 Hz.\u003c\/li\u003e\n\u003cli\u003eAutomatic turn-on capability via signal sensing or DC-offset sensing for systems where a dedicated remote turn-on lead is not available.\u003c\/li\u003e\n\u003cli\u003eControls protected beneath a gasketed, removable top cover for installs where splash and vibration are part of normal use.\u003c\/li\u003e\n\u003cli\u003eOptional remote level control support using HD-RLC or MHD-RLC (water-resistant) controllers, sold separately, for quick adjustment from the helm or cockpit.\u003c\/li\u003e\n\u003cli\u003eRange includes 1, 2, 3, 4, 5, 6, and 8 channel models with total power ratings from 200 W to 1000 W, depending on configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis page covers the full Garmin JL Audio XDM amplifier range. Configurations vary by channel count (1 to 8) and total rated power (200 W to 1000 W), so the same family can support anything from a small two-speaker cabin setup to multi-zone speaker layouts with a dedicated subwoofer channel.\u003c\/p\u003e\u003cp\u003eSystem voltage also varies across the line. Some models are intended for 12 V negative-ground electrical systems, while select versions are intended for 24 V negative-ground electrical systems only, so matching the amplifier to the boat’s supply voltage is part of the fit check.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting spot the same way you would for any high-output marine amplifier: a location that stays dry, has airflow, and keeps the chassis away from extreme heat. Under-seat lockers, inside consoles, and protected compartments work well when they are ventilated and wiring can be secured to avoid chafe.\u003c\/p\u003e\u003cp\u003ePower and speaker wiring should be routed away from moving parts and sharp edges, with protection where it passes through bulkheads. Leave enough slack and access to reach the top-mounted controls during tuning after the unit is fastened down.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe input architecture is meant to play nicely with real-world boat systems, including installs where noise has been a problem. Differential-balanced inputs and the dual-mode input filter help keep the signal clean, and automatic turn-on options can simplify integration when the source unit does not provide a traditional remote lead.\u003c\/p\u003e\u003cp\u003eOn-board tuning is handled with adjustable filters on channel banks, which helps when you need to high-pass small coaxials in the cockpit, low-pass a subwoofer channel, or shape how different speaker runs share the load.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eChannel count is the practical difference you feel day to day. The 1-channel configurations are commonly used when the system needs dedicated subwoofer power, while multi-channel models support pairs of full-range speakers across the cockpit and cabin, and the higher channel-count units suit boats running more speakers across multiple listening areas.\u003c\/p\u003e\u003cp\u003eThis range is a good match for boats where amplifier space is tight under seating or inside a helm console, and for systems where charging noise and long wiring runs have made clean audio harder to achieve.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"5 \/ 1000 W \/ No","offer_id":52262474514613,"sku":"QBP424692-V1","price":889.17,"currency_code":"USD","in_stock":false},{"title":"5 \/ 700 W \/ No","offer_id":52262474547381,"sku":"QBP424692-V2","price":787.56,"currency_code":"USD","in_stock":false},{"title":"1 \/ 300 W \/ No","offer_id":52262474580149,"sku":"QBP424692-V3","price":448.81,"currency_code":"USD","in_stock":false},{"title":"1 \/ 600 W \/ No","offer_id":52262474612917,"sku":"QBP424692-V4","price":533.5,"currency_code":"USD","in_stock":false},{"title":"1 \/ 1000 W \/ No","offer_id":52262474645685,"sku":"QBP424692-V5","price":702.87,"currency_code":"USD","in_stock":false},{"title":"2 \/ 200 W \/ No","offer_id":52262474678453,"sku":"QBP424692-V6","price":448.81,"currency_code":"USD","in_stock":false},{"title":"3 \/ 500 W \/ No","offer_id":52262474711221,"sku":"QBP424692-V7","price":575.83,"currency_code":"USD","in_stock":false},{"title":"4 \/ 400 W \/ No","offer_id":52262474743989,"sku":"QBP424692-V8","price":575.83,"currency_code":"USD","in_stock":false},{"title":"6 \/ 600 W \/ No","offer_id":52262474776757,"sku":"QBP424692-V9","price":702.87,"currency_code":"USD","in_stock":false},{"title":"6 \/ 600 W \/ Yes","offer_id":52262474809525,"sku":"QBP424692-V10","price":719.81,"currency_code":"USD","in_stock":false},{"title":"8 \/ 800 W \/ No","offer_id":52262474842293,"sku":"QBP424692-V11","price":931.52,"currency_code":"USD","in_stock":false},{"title":"8 \/ 800 W \/ Yes","offer_id":52262474875061,"sku":"QBP424692-V12","price":973.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294078_qbp424692.webp?v=1771364707"},{"product_id":"qbp424912","title":"JL Audio M6 Marine Subwoofer, 4 Ohm, Transflective LED Option","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio M6 Marine Subwoofers is a family of marine subwoofer drivers offered in 8 in and 10 in sizes, each with a 4 ohm load and continuous power handling of 200 W (8 in) or 250 W (10 in). Configurations cover both infinite-baffle (free-air) installs and enclosed-use options, along with grille color and style choices that let you match the look across the boat.\u003c\/p\u003e\u003cp\u003eThese subwoofers are built for real cockpit and cabin conditions where gear sees spray, sun, and vibration. The front is protected from water ingress, but the rear terminals and wiring are not waterproof, so plan the mounting location and any enclosures so the back of the driver stays dry and protected from washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e8 in model fit: 7.375 in mounting hole diameter with 5.00 in mounting depth.\u003c\/li\u003e\n\u003cli\u003e10 in model fit: 8.875 in mounting hole diameter with 5.90 in mounting depth clearance.\u003c\/li\u003e\n\u003cli\u003e4 ohm subwoofer drivers rated for 200 W continuous (8 in) or 250 W continuous (10 in) power handling.\u003c\/li\u003e\n\u003cli\u003eRange includes both infinite-baffle (free-air) and enclosed-use variants, depending on the part number.\u003c\/li\u003e\n\u003cli\u003eTransflective RGB LED lighting is available on select variants; the LED circuit runs on 10 to 14.4 V DC and uses a 750 mA fast-blow fuse per subwoofer on the LED positive lead.\u003c\/li\u003e\n\u003cli\u003eGrille color and style options include White Classic, White Sport, Titanium Sport, White Luxe, and Black Luxe.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range is offered in many configurations, and the details that matter for fit and wiring are tied to the specific part number.\u003c\/p\u003e\u003cp\u003eAcross the lineup, variants differ by size (8 in or 10 in), installation type (infinite-baffle\/free-air or enclosed-use), Transflective LED lighting (yes or no), and grille color\/style. Audio wiring remains a standard two-conductor speaker connection, while LED-equipped versions add a separate 12 V lighting harness that needs its own fused feed.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eStart with the physical clearances. The 8 in driver uses a 7.375 in cutout and needs 5.00 in of depth behind the mounting surface. The 10 in driver uses an 8.875 in cutout and needs 5.90 in of depth clearance.\u003c\/p\u003e\u003cp\u003eMounting on a flat, solid surface helps the seal at the front and keeps vibration down. If you have a magnetic compass nearby, leave space so the subwoofer does not interfere with it.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eIf the mounting location is exposed to weather or water, install on a vertical surface. A horizontal surface facing up can let water pool around the grille, which causes damage over time. For exterior installs, keep the driver well above the waterline and away from docks, pilings, and areas where it could be submerged.\u003c\/p\u003e\u003cp\u003eRoute speaker wires and any LED leads so they cannot chafe on sharp edges. When passing through panels, use rubber grommets and keep all connections insulated so nothing can ground out.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eOn the audio side, these are 4 ohm subwoofer drivers. Match your amplifier and tuning to the driver size: 200 W continuous for the 8 in model and 250 W continuous for the 10 in model.\u003c\/p\u003e\u003cp\u003eFor LED-equipped versions, the lighting circuit is 12 V (10 to 14.4 V DC) and requires an inline 750 mA fast-blow fuse per subwoofer at the power-source end of the LED positive lead. Use at least 20 AWG wire for the LED power and ground runs, and do not connect the LED lighting to 24 V systems or to navigation light circuits.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis series suits boats where you want low-frequency support that holds together in open-air listening, such as cockpit seating zones, helm areas, or salon systems that need more bottom end. LED variants also make sense when you already have an accent-lighting plan and want the audio zones to match the rest of the boat at night.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWash the exposed surfaces with mild soap and rinse with fresh water. Avoid high-pressure spray and do not allow water to soak the rear of the driver, terminals, or wiring.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"8\" Infinite Baffle \/ No \/ White Classic","offer_id":52262474907829,"sku":"QBP424912-V1","price":269.43,"currency_code":"USD","in_stock":false},{"title":"8\" Infinite Baffle \/ No \/ White Luxe","offer_id":52262474940597,"sku":"QBP424912-V2","price":384.92,"currency_code":"USD","in_stock":false},{"title":"8\" Infinite Baffle \/ No \/ White Sport","offer_id":52262474973365,"sku":"QBP424912-V3","price":269.43,"currency_code":"USD","in_stock":false},{"title":"8\" Infinite Baffle \/ No \/ Titanium Sport","offer_id":52262475006133,"sku":"QBP424912-V4","price":292.53,"currency_code":"USD","in_stock":false},{"title":"8\" Infinite Baffle \/ No \/ Black Luxe","offer_id":52262475038901,"sku":"QBP424912-V5","price":383.71,"currency_code":"USD","in_stock":false},{"title":"8\" Infinite Baffle \/ Yes \/ White Sport","offer_id":52262475071669,"sku":"QBP424912-V6","price":306.98,"currency_code":"USD","in_stock":false},{"title":"8\" Infinite Baffle \/ Yes \/ Titanium Sport","offer_id":52262475104437,"sku":"QBP424912-V7","price":329.99,"currency_code":"USD","in_stock":false},{"title":"10\" Infinite Baffle \/ No \/ White Classic","offer_id":52262475137205,"sku":"QBP424912-V8","price":369.52,"currency_code":"USD","in_stock":false},{"title":"10\" Infinite Baffle \/ No \/ White Luxe","offer_id":52262475169973,"sku":"QBP424912-V9","price":461.9,"currency_code":"USD","in_stock":false},{"title":"10\" Infinite Baffle \/ No \/ White Sport","offer_id":52262475202741,"sku":"QBP424912-V10","price":369.52,"currency_code":"USD","in_stock":false},{"title":"10\" Infinite Baffle \/ No \/ Titanium Sport","offer_id":52262475235509,"sku":"QBP424912-V11","price":384.92,"currency_code":"USD","in_stock":false},{"title":"10\" Infinite Baffle \/ No \/ Black Luxe","offer_id":52262475268277,"sku":"QBP424912-V12","price":461.9,"currency_code":"USD","in_stock":false},{"title":"10\" Infinite Baffle \/ Yes \/ White Sport","offer_id":52262475301045,"sku":"QBP424912-V13","price":406.74,"currency_code":"USD","in_stock":false},{"title":"10\" Infinite Baffle \/ Yes \/ Titanium Sport","offer_id":52262475333813,"sku":"QBP424912-V14","price":422.09,"currency_code":"USD","in_stock":false},{"title":"10\" \/ No \/ White Classic","offer_id":52262475366581,"sku":"QBP424912-V15","price":369.52,"currency_code":"USD","in_stock":false},{"title":"10\" \/ No \/ White Sport","offer_id":52262475399349,"sku":"QBP424912-V16","price":369.52,"currency_code":"USD","in_stock":false},{"title":"10\" \/ No \/ Titanium Sport","offer_id":52262475432117,"sku":"QBP424912-V17","price":384.92,"currency_code":"USD","in_stock":false},{"title":"10\" \/ Yes \/ White Sport","offer_id":52262475464885,"sku":"QBP424912-V18","price":408.02,"currency_code":"USD","in_stock":false},{"title":"10\" \/ Yes \/ Titanium Sport","offer_id":52262475497653,"sku":"QBP424912-V19","price":423.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294124_qbp424912.jpg?v=1771364713"},{"product_id":"qbp425211","title":"JL Audio Parallel Conductor Speaker Cable, For Marine Speaker Systems, Tinned Copper Conductors, White PVC Jacket","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio White Parallel Conductor Speaker Cable is a two-conductor marine speaker wire offered in 12 AWG or 16 AWG, with lengths from 25 ft (7.6 m) up to 500 ft (152.4 m). It uses tinned oxygen-free copper conductors inside a soft white PVC jacket, so the cable stays easy to route while helping slow corrosion in damp compartments and salty air.\u003c\/p\u003e\u003cp\u003eThis is the cable you run between a marine amplifier or head unit and your speakers. The parallel conductor layout keeps the two runs together and makes it easier to maintain correct speaker polarity when you are pulling wire through chases, under gunwales, or behind helm panels.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eParallel two-conductor layout helps keep speaker polarity consistent during installation and troubleshooting\u003c\/li\u003e\n\u003cli\u003eTinned oxygen-free copper conductors help reduce corrosion issues common in saltwater environments\u003c\/li\u003e\n\u003cli\u003eSoft, flexible white PVC jacket is easier to pull through conduits, lockers, and tight rigging runs\u003c\/li\u003e\n\u003cli\u003eTrue 12 AWG and true 16 AWG options to match different run lengths and system power demands\u003c\/li\u003e\n\u003cli\u003eAvailable as 25 ft cut lengths for targeted jobs and bulk spools for full boat rewires\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis cable is available in multiple gauge and length combinations for everything from a single speaker run to a complete multi-zone install.\u003c\/p\u003e\u003cp\u003eThe variants differ by American Wire Gauge (AWG) and total length. The white PVC jacket, parallel-conductor format, and tinned copper construction remain consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-13424-00: 16 AWG, 25 ft (7.6 m). A practical length for a focused install such as a helm-to-cabin run or a single pair of speakers.\u003c\/li\u003e\n\u003cli\u003e010-13425-00: 16 AWG, 500 ft (152.4 m). Bulk spool suited to multi-speaker systems where you are pulling many shorter runs throughout the boat.\u003c\/li\u003e\n\u003cli\u003e010-13449-00: 12 AWG, 25 ft (7.6 m). Heavier gauge in a manageable length when you are keeping resistance low on a short, higher-demand run.\u003c\/li\u003e\n\u003cli\u003e010-13450-00: 12 AWG, 380 ft (115.8 m). Bulk spool for longer pulls, larger boats, and higher-power audio zones that benefit from thicker conductors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute speaker cable away from sharp edges and moving gear, then secure it so it cannot chafe under vibration. In wet lockers and bilge-adjacent runs, sealed terminations and adhesive-lined heat shrink help keep connections stable over time.\u003c\/p\u003e\u003cp\u003eWhen running near high-current DC wiring, keep separation where possible to reduce the chance of noise pickup. Label both ends during the pull so final speaker hookup at the amplifier and at each speaker stays straightforward.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is standard two-conductor speaker cable for marine audio systems, so it pairs with typical speaker terminals, marine amplifiers, and head units. Confirm your speaker and amplifier terminals can accept the selected gauge, especially with 12 AWG in tighter terminal blocks.\u003c\/p\u003e\u003ch6\u003eOn-board use notes\u003c\/h6\u003e\u003cp\u003eThis cable is a good match for boaters who want clean, consistent wiring for cockpit, cabin, or tower speaker runs and who need a jacket that stays flexible during routing. Bulk spools make sense for new builds, refits, or multi-zone audio layouts where you want one cable type throughout the boat.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"16 \/ 25 ft","offer_id":52262475563189,"sku":"QBP425211-V1","price":60.05,"currency_code":"USD","in_stock":false},{"title":"16 \/ 500 ft","offer_id":52262475595957,"sku":"QBP425211-V2","price":545.99,"currency_code":"USD","in_stock":false},{"title":"12 \/ 25 ft","offer_id":52262475628725,"sku":"QBP425211-V3","price":75.04,"currency_code":"USD","in_stock":false},{"title":"12 \/ 380 ft","offer_id":52262475661493,"sku":"QBP425211-V4","price":709.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294196_qbp425211.webp?v=1771364716"},{"product_id":"qbp425769","title":"JL Audio MediaMaster Connection Cable, For Non-NMEA 2000 Remotes","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio Connection Cable for MediaMaster Source Units is a remote interconnect cable that links a JL Audio MediaMaster source unit to wired remote controllers that are not on an NMEA 2000 network.\u003c\/p\u003e\u003cp\u003eIt is offered in 6 ft (1.83 m) and 25 ft (7.6 m) lengths to match short helm installs and longer runs to a second control station. This is a dedicated remote connection cable, not an NMEA 2000 backbone or drop cable.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConnects JL Audio MediaMaster source units to non-NMEA 2000 wired remote controllers.\u003c\/li\u003e\n\u003cli\u003eTwo length options: 6 ft (1.83 m) or 25 ft (7.6 m).\u003c\/li\u003e\n\u003cli\u003eHelps keep the source unit mounted out of the way while maintaining a wired control point at the helm or another station.\u003c\/li\u003e\n\u003cli\u003eIntended for MediaMaster installations using non-NMEA 2000 remotes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple lengths.\u003c\/p\u003e\u003cp\u003eCable length is what changes between variants.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-13430-00: Length 6 ft (1.83 m). A practical length when the remote and the source unit are mounted on the same console.\u003c\/li\u003e\n\u003cli\u003e010-13429-00: Length 25 ft (7.6 m). Suits longer runs to a second station such as a flybridge, cockpit, or transom control location.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eRemote interconnect cable (length per selected variant)\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eInstallation and routing\u003c\/h6\u003e\u003cp\u003eMeasure the cable path on the boat rather than the straight-line distance, and account for routing through rigging tubes, chases, and bulkhead pass-throughs. Leaving a small service loop at each end makes future service easier and reduces strain at the connections.\u003c\/p\u003e\u003cp\u003eSecure the run so it cannot rub or vibrate against fiberglass edges, and keep it separated from high-current wiring when possible.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is used when a JL Audio MediaMaster source unit is paired with wired remote controllers that connect through the non-NMEA 2000 remote interface. It is a good match for boats adding a second control location while keeping the main source unit mounted behind the dash or inside a dry compartment.\u003c\/p\u003e\u003cp\u003eRemotes that communicate over NMEA 2000 use standard NMEA 2000 cabling instead of this interconnect cable.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"6 ft","offer_id":52262475694261,"sku":"QBP425769-V1","price":38.21,"currency_code":"USD","in_stock":false},{"title":"25 ft","offer_id":52262475727029,"sku":"QBP425769-V2","price":70.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294198_qbp425769.webp?v=1771364717"},{"product_id":"qbp426600","title":"JL Audio XMD Marine RCA Interconnect Cable, Twisted-Pair, OFC Copper","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio Marine RCA Audio Interconnect is an RCA patch cable for carrying low-level audio signal between a source unit, processor, and amplifier in a boat stereo system. It is offered in 2-channel and 4-channel versions, with lengths from 3 ft up to 25 ft (7.62 m) to match short helm runs or longer routes to amps mounted in a console, cabin, or aft compartment.\u003c\/p\u003e\u003cp\u003eThe cable uses twisted-pair conductors with oxygen-free copper and polyethylene dielectrics, plus molded connector bodies and machined brass connector elements. That construction helps keep the connection stable and the signal clean when the boat is dealing with vibration and electrical noise from pumps, chargers, and engine systems.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRCA audio interconnect for line-level signals between head unit, DSP, and amplifier inputs.\u003c\/li\u003e\n\u003cli\u003eAvailable in 2-channel and 4-channel layouts to match common stereo and multi-input amp wiring.\u003c\/li\u003e\n\u003cli\u003eLength options to suit tight helm spaces or long runs across the boat (3 ft, 6 ft, 12 ft, 25 ft).\u003c\/li\u003e\n\u003cli\u003eTwisted-pair conductor geometry that helps reduce picked-up noise in real-world cable routing.\u003c\/li\u003e\n\u003cli\u003eOxygen-free copper conductors with polyethylene dielectrics for consistent signal transfer.\u003c\/li\u003e\n\u003cli\u003eMolded connector bodies with machined brass connector elements for a secure fit at the RCA jacks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis interconnect is available with two channel counts and multiple cable lengths. The channel count changes how many RCA pairs are in the single jacketed cable, and the length changes how far you can route the signal run without adding couplers.\u003c\/p\u003e\u003cp\u003e2-channel versions carry one left and right pair. 4-channel versions carry two left and right pairs in the same cable, which is commonly used when feeding multiple amplifier inputs from a multi-zone source or a processor.\u003c\/p\u003e\u003ch6\u003eInstallation and routing\u003c\/h6\u003e\u003cp\u003eRun RCA cables separately from high-current DC wiring when you can, especially battery feeds to amplifiers, windlass lines, and long pump runs. If cable paths must cross, crossing at a right angle helps reduce induced noise compared with running side-by-side for long distances.\u003c\/p\u003e\u003cp\u003eLeave a little service loop at the source and amplifier ends so you are not pulling on the RCA jacks during service. Support the cable with clamps or ties so the connectors are not carrying the weight of the run in a vibrating console.\u003c\/p\u003e\u003ch6\u003eCompatibility notes\u003c\/h6\u003e\u003cp\u003eThis is an analog RCA interconnect intended for preamp or line-level audio connections. It mates with standard RCA inputs and outputs found on many marine source units, processors, and amplifiers, and it is not meant for speaker-level wiring.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eOne marine audio RCA interconnect cable (channel count and length as selected).\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the RCA ends clean and dry where possible, especially in open consoles or lockers that see spray. During seasonal checks, inspect the connectors for looseness or corrosion and make sure the cable jacket has not been pinched by hatches, drawers, or rigging tubes.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"4 \/ 6 ft","offer_id":52262475759797,"sku":"QBP426600-V1","price":60.05,"currency_code":"USD","in_stock":false},{"title":"4 \/ 12 ft","offer_id":52262475792565,"sku":"QBP426600-V2","price":87.35,"currency_code":"USD","in_stock":false},{"title":"4 \/ 25 ft","offer_id":52262475825333,"sku":"QBP426600-V3","price":98.27,"currency_code":"USD","in_stock":false},{"title":"2 \/ 3 ft","offer_id":52262475858101,"sku":"QBP426600-V4","price":27.29,"currency_code":"USD","in_stock":false},{"title":"2 \/ 6 ft","offer_id":52262475890869,"sku":"QBP426600-V5","price":35.38,"currency_code":"USD","in_stock":false},{"title":"2 \/ 12 ft","offer_id":52262475923637,"sku":"QBP426600-V6","price":43.67,"currency_code":"USD","in_stock":false},{"title":"2 \/ 25 ft","offer_id":52262475956405,"sku":"QBP426600-V7","price":60.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294200_qbp426600.webp?v=1771364718"},{"product_id":"qbp426687","title":"JL Audio Premium Power Marine Connection Kit, 12V, For Single Amplifier, ABYC-Standard Colored Wires","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio Premium Power Marine Connection Kit is a 12 V power and ground wiring set for feeding a single marine amplifier, with configurations matched to a 10 ft, 12 ft, or 20 ft run from the battery to the amp location.\u003c\/p\u003e\u003cp\u003eThe 6 AWG configurations support amplifier power feeds up to a 50A protection device and include a 50A manual-reset marine circuit breaker that is IP67-rated and SAE J1171 external ignition protected, with stainless steel connection points. The 9 AWG configuration is set up for a 30A MAXI fuse and fuse holder. Across the range, the conductors are true AWG-spec, pure OFC copper with tinning to slow corrosion in damp compartments.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMultiple distance options for routing from battery to amplifier location: 10 ft, 12 ft, or 20 ft\u003c\/li\u003e\n\u003cli\u003eChoice of 6 AWG or 9 AWG tinned power and ground wiring, depending on the configuration\u003c\/li\u003e\n\u003cli\u003eABYC-standard wire colors to keep power, ground, and remote turn-on runs easy to trace during install and service\u003c\/li\u003e\n\u003cli\u003e6 AWG configurations include a 50A manual-reset marine circuit breaker with IP67 rating and SAE J1171 ignition protection, plus stainless connection points\u003c\/li\u003e\n\u003cli\u003e9 AWG configuration includes a 30A MAXI fuse and fuse holder for overcurrent protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations so you can match the wiring to the one-way distance between the battery and the amplifier mounting location.\u003c\/p\u003e\u003cp\u003eAcross the variants, the main differences are the supported run length and the overcurrent protection method (circuit breaker or fuse), along with the wire gauge. Each configuration includes color-coded power, ground, and remote turn-on wiring for a single-amplifier install.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-13417-00: Distance to battery 10 ft. This length fits shorter routing paths where the amplifier is mounted close to the battery feed, and it uses a 50A manual-reset marine circuit breaker for protection.\u003c\/li\u003e\n\u003cli\u003e010-13649-00: Distance to battery 12 ft. This length covers moderate routing paths through consoles and lockers, and it uses a 30A MAXI fuse with fuse holder for overcurrent protection.\u003c\/li\u003e\n\u003cli\u003e010-13418-00: Distance to battery 20 ft. This length supports longer routing paths through rigging chases and under-deck runs, and it uses a 50A manual-reset marine circuit breaker for protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMeasure the actual one-way cable path you will run on the boat, not a straight-line measurement. Plan for a clean route through existing chases or rigging tubes where possible, then add a little extra for bends, service loops, and routing around bulkheads.\u003c\/p\u003e\u003cp\u003eMount the circuit breaker or fuse holder close to the battery connection and secure the wiring so it cannot move and rub on fiberglass edges, hinges, or sharp hardware. Use grommets anywhere the wire passes through a panel, and re-check fasteners after the first few trips since vibration can loosen new installs.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is intended for 12 V DC audio power distribution to a single amplifier. The 6 AWG options are paired with a 50A circuit breaker, while the 9 AWG option is paired with a 30A MAXI fuse and fuse holder, so the configuration should match the protection level used by your amplifier and wiring plan.\u003c\/p\u003e\u003cp\u003eIt is a good match for a one-amplifier stereo upgrade on boats where you want color-coded marine audio wiring and a protection device that is easy to service without piecing together separate wire runs and hardware.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"10 ft","offer_id":52262476021941,"sku":"QBP426687-V1","price":294.83,"currency_code":"USD","in_stock":false},{"title":"12 ft","offer_id":52262476054709,"sku":"QBP426687-V2","price":169.6,"currency_code":"USD","in_stock":false},{"title":"20 ft","offer_id":52262476087477,"sku":"QBP426687-V3","price":404.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294207_qbp426687.webp?v=1771364720"},{"product_id":"qbp426786","title":"JL Audio 6-Conductor Multifunction Cable, For LED Speakers, 20\/4+16\/2 AWG, Marine-Grade White PVC Jacket, Stannum-Plated for Corrosion Resistance","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis JL Audio white 6-conductor multifunction cable is a single jacketed run that carries both speaker wire and illumination power for JL Audio speakers and subwoofers with LED lighting. Inside the cable are two 16 AWG oxygen-free copper speaker leads plus four 20 AWG leads intended for the illumination circuit, which helps keep installs cleaner when you are routing through a hardtop leg, wake tower, or rigging tube.\u003c\/p\u003e\u003cp\u003eThe conductors are stannum-plated for corrosion resistance, and the fine-strand construction stays flexible when you have to work around tight bends. It is offered in 25 ft (7.62 m) and 250 ft (76.2 m) lengths, covering anything from a short cockpit run to a full custom rewire.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e6 conductors in one jacket: two 16 AWG speaker leads and four 20 AWG illumination power leads\u003c\/li\u003e\n\u003cli\u003eOxygen-free copper conductors for the speaker and illumination runs\u003c\/li\u003e\n\u003cli\u003eStannum-plated conductors to help slow corrosion in salt-air and damp storage spaces\u003c\/li\u003e\n\u003cli\u003eFine-strand build that stays flexible for pulls through conduits and around tight bends\u003c\/li\u003e\n\u003cli\u003eWhite PVC outer jacket that protects the conductors and blends into common marine rigging paths\u003c\/li\u003e\n\u003cli\u003eAvailable as a 25 ft cut length or a 250 ft bulk spool for custom cutting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis cable is offered in multiple lengths, depending on how far you need to run from the amplifier area to the speakers and back to your lighting control or switching point.\u003c\/p\u003e\u003cp\u003eThe conductor count and wire gauges stay the same across the options. The difference is the supplied length and whether you are working from a ready-to-run cut length or a bulk spool for custom cuts.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-13422-00: Length 25 ft (7.62 m). Common for shorter runs on smaller boats where the amp and lighting controls sit relatively close to the speaker locations.\u003c\/li\u003e\n\u003cli\u003e010-13423-00: Length 250 ft (76.2 m). Bulk spool for custom installs where you are cutting multiple runs to length and pulling wiring through long rigging paths.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan your routing before you pull cable, and avoid running speaker conductors alongside high-current power cabling for long distances when you can. Leave a little service loop at the amp end and at each speaker so future service does not turn into a rewire.\u003c\/p\u003e\u003cp\u003eBecause this combines speaker conductors and illumination conductors, label the four 20 AWG leads at both ends before terminating. Keep the illumination circuit protected with appropriate circuit protection for your lighting controller or switch, separate from any amplifier protection.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is intended for JL Audio marine speakers and subwoofers that use separate wiring for LED illumination, letting you bring audio and lighting to the same location without multiple cable pulls. It can also be used anywhere you need a clean 6-conductor pull with two heavier conductors for speaker output and four smaller conductors for low-current accessories.\u003c\/p\u003e\u003ch6\u003eOn-board use notes\u003c\/h6\u003e\u003cp\u003eThis makes sense on boats where speakers live on a hardtop, wake tower, or transom and the amplifier and lighting controls are mounted inside a console, cabin, or equipment locker. Keeping the related conductors together in one jacket can also simplify troubleshooting later because the audio pair and lighting leads stay grouped end-to-end.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"25 ft","offer_id":52262476153013,"sku":"QBP426786-V1","price":110.07,"currency_code":"USD","in_stock":false},{"title":"250 ft","offer_id":52262476185781,"sku":"QBP426786-V2","price":630.62,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294210_qbp426786.webp?v=1771364721"},{"product_id":"qbp427177","title":"JL Audio Swivel Mount Fixture, For JL Audio PS650-VeX Enclosed Speaker Systems, 2pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio Mount Fixture for VeX Enclosed System is a swivel mount fixture set for installing VeX enclosed speaker pods on a boat, either on round tubing or on a flat mounting surface. Pipe-mount versions are sized to match common tower and rail diameters from 0.75 in up to 3.25 in, and the range also includes surface-mount versions for hardtops, bulkheads, and other solid panels.\u003c\/p\u003e\u003cp\u003eThis hardware is used most often on wake and surf boat towers, T-tops, radar arches, and grab-rail style tubing where the speakers need to stay locked in place through vibration and repeated spray. Once mounted, the swivel style lets you aim the pods where you want them and then clamp them down.\u003c\/p\u003e\u003cp\u003eThese fixture sets are sold as a pair for mounting two pods, which keeps the port and starboard install consistent and helps with alignment when you are setting speaker angles.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMount fixture set for JL Audio VeX enclosed speaker pods, with configurations for pipe mounting or surface mounting\u003c\/li\u003e\n\u003cli\u003ePipe-mount sizing covers round tubing from 0.75 in to 3.25 in, so you can match common tower and T-top tube diameters\u003c\/li\u003e\n\u003cli\u003eSurface-mount configurations for flat mounting locations, offered in black or clear finishes\u003c\/li\u003e\n\u003cli\u003eSwivel-style mounting that allows aiming the pods before locking the position down\u003c\/li\u003e\n\u003cli\u003eSold as a pair to mount two pods with the same hardware and orientation\u003c\/li\u003e\n\u003cli\u003ePipe-mount versions use strap-style clamps and include a protective strip to help reduce marring on painted or coated tubing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis mount fixture is offered in multiple configurations that differ by mounting style, pipe size, and finish. The pipe-mount configurations are listed by the tubing size in inches, and the surface-mount configurations are listed without a tube size.\u003c\/p\u003e\u003cp\u003eAcross the range, the differences come down to how the fixture attaches to the boat and what it fits: pipe-mount versions match specific round tube diameters, while surface-mount versions fasten to a flat panel and are available in black or clear.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThese fixtures are meant for VeX enclosed speaker pods and the matching VeX mounting interface. If you are mounting a different speaker family or a soundbar, confirm the mounting pattern and clamp style before ordering.\u003c\/p\u003e\u003cp\u003eFor pipe mounting, measure the outside diameter of the tube where you plan to mount and match that measurement to the listed pipe size. On towers and hardtops, also check clearance for the pod body and for the swivel travel so the speakers can be aimed without hitting canvas, handholds, or overhead electronics.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eOn pipe installs, place the protective strip between the clamp and the tube, then tighten the hardware evenly so the clamp seats square. On surface installs, mount to a solid area of fiberglass, aluminum, or composite that can take the load of the pods under chop, and seal any penetrations to keep water out of the core.\u003c\/p\u003e\u003cp\u003eAfter your first run, recheck fasteners once everything has settled, especially on boats that see heavy tower vibration or frequent trailering.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boaters running VeX pods on a wake tower or hardtop who need a clean, repeatable way to mount and aim the speakers. It also suits center consoles with a T-top where the pods need to sit tight against a round frame tube without slipping when the boat is pounding.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the mounts after saltwater use and periodically check clamp tightness. If the boat is stored outdoors, a quick wipe-down helps keep the finish looking clean and prevents salt buildup around fasteners and clamp edges.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Pipe \/ 0.75\" \/ Black","offer_id":52262476218549,"sku":"QBP427177-V1","price":200.14,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 0.875\" \/ Black","offer_id":52262476251317,"sku":"QBP427177-V2","price":140.1,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 1\" \/ Black","offer_id":52262476284085,"sku":"QBP427177-V3","price":140.1,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 1.125\" \/ Black","offer_id":52262476316853,"sku":"QBP427177-V4","price":140.1,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 1.25\" \/ Black","offer_id":52262476349621,"sku":"QBP427177-V5","price":200.14,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 1.375\" \/ Black","offer_id":52262476382389,"sku":"QBP427177-V6","price":200.14,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 1.5\" \/ Black","offer_id":52262476415157,"sku":"QBP427177-V7","price":200.14,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 1.625\" \/ Black","offer_id":52262476447925,"sku":"QBP427177-V8","price":140.1,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 1.7\" \/ Black","offer_id":52262476480693,"sku":"QBP427177-V9","price":140.1,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 1.75\" \/ Black","offer_id":52262476513461,"sku":"QBP427177-V10","price":170.13,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 1.85\" \/ Black","offer_id":52262476546229,"sku":"QBP427177-V11","price":140.1,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 1.875\" \/ Black","offer_id":52262476578997,"sku":"QBP427177-V12","price":200.14,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 2\" \/ Black","offer_id":52262476611765,"sku":"QBP427177-V13","price":170.13,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 2.25\" \/ Black","offer_id":52262476644533,"sku":"QBP427177-V14","price":180.14,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 2.375\" \/ Black","offer_id":52262476677301,"sku":"QBP427177-V15","price":250.19,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 2.5\" \/ Black","offer_id":52262476710069,"sku":"QBP427177-V16","price":180.14,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 3.25\" \/ Black","offer_id":52262476742837,"sku":"QBP427177-V17","price":180.14,"currency_code":"USD","in_stock":false},{"title":"Surface \/ N\/A \/ Black","offer_id":52262476775605,"sku":"QBP427177-V18","price":250.19,"currency_code":"USD","in_stock":false},{"title":"Surface \/ N\/A \/ Clear","offer_id":52262476808373,"sku":"QBP427177-V19","price":250.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294212_qbp427177.webp?v=1771364724"},{"product_id":"qbp428160","title":"JL Audio M7-12IB Marine Infinite-Baffle Subwoofer, 12in, 600W, 4 Ohm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio M7 12-inch marine subwoofer is a 4 ohm, 600 W RMS infinite-baffle driver built for strong low-end when you do not have room for a dedicated enclosure.\u003c\/p\u003e\u003cp\u003eIt mounts through a bulkhead, seat base, or cabinetry panel and works with a large air volume behind it. For predictable bass, plan on at least 3 cu. ft. of air space behind the mounting surface and keep the rear wave separated from the front.\u003c\/p\u003e\u003cp\u003eFit is straightforward to check before you cut: the mounting hole is 12.06 in, mounting depth clearance is 7.94 in, overall diameter is 14 in, and overall depth is about 9.4 in. The front grille sits roughly 1.5 in proud of the mounting surface.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12-inch infinite-baffle marine subwoofer driver for bulkhead and cabinetry mounting (4 ohm, 600 W RMS)\u003c\/li\u003e\n\u003cli\u003eOptimized for 200 to 600 W RMS of amplifier power with a large rear air volume (at least 3 cu. ft.)\u003c\/li\u003e\n\u003cli\u003e4-inch voice coil to handle continuous power in open-air installs\u003c\/li\u003e\n\u003cli\u003eExceeds international standards for salt fog and UV exposure\u003c\/li\u003e\n\u003cli\u003eRemovable grille and trim ring for painting and cosmetic matching\u003c\/li\u003e\n\u003cli\u003eSpade-connector speaker terminals for secure, serviceable terminations\u003c\/li\u003e\n\u003cli\u003eTransflective RGB LED lighting available on select variants, with light output through the cone\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis subwoofer is offered in multiple configurations to match the look of the boat and whether you want integrated accent lighting.\u003c\/p\u003e\u003cp\u003eThe options in this range are Transflective LED lighting (Yes or No) and the grille color\/style (White Classic, White Sport, or Titanium Sport).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-03285-00: Transflective LED lighting: No; grille color\/style: White Classic. A clean front with the Classic grille profile and no lighting wiring to plan for.\u003c\/li\u003e\n\u003cli\u003e010-03286-00: Transflective LED lighting: No; grille color\/style: White Sport. A Sport grille look with the same non-lit install approach.\u003c\/li\u003e\n\u003cli\u003e010-03288-00: Transflective LED lighting: No; grille color\/style: Titanium Sport. A darker, metallic Sport-grille finish for builds that are not using LED accents.\u003c\/li\u003e\n\u003cli\u003e010-03287-00: Transflective LED lighting: Yes; grille color\/style: White Sport. Adds Transflective RGB lighting while keeping a bright, white Sport-grille appearance.\u003c\/li\u003e\n\u003cli\u003e010-03289-00: Transflective LED lighting: Yes; grille color\/style: Titanium Sport. Adds Transflective RGB lighting with the Titanium Sport grille look.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOne marine subwoofer\u003c\/li\u003e\n\u003cli\u003eOne grille\u003c\/li\u003e\n\u003cli\u003eSix stainless steel mounting screws\u003c\/li\u003e\n\u003cli\u003eSix stainless steel washers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePair it with an amplifier channel that is stable at 4 ohms and sized in the 200 to 600 W RMS range for the way you listen. Use marine tinned wire sized for the run, keep terminations tight at the spade connectors, and secure the wiring so it cannot rattle against nearby structure.\u003c\/p\u003e\u003cp\u003eBecause this is an infinite-baffle subwoofer, the mounting surface matters as much as the driver. A stiff panel and a good seal around the cutout help prevent panel buzz and keep the bass from canceling out between the front and rear of the install.\u003c\/p\u003e\u003ch6\u003eLighting and trim notes\u003c\/h6\u003e\u003cp\u003eModels with Transflective LED lighting include built-in RGB accent lighting that glows through the cone. If you plan to use the lighting, leave room for the additional wiring and a compatible marine RGB lighting control method in your system.\u003c\/p\u003e\u003cp\u003eThe grille and trim ring can be removed for painting, which helps when you are matching a custom interior or refreshing an older cockpit.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for wake boats, center consoles, and cruisers where the sub has to live in a seat base, helm module, or cabin bulkhead and still keep up with wind and engine noise. It also fits well in multi-zone systems where you want a dedicated low-frequency driver instead of pushing cockpit speakers to cover the bottom end.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt spray off the grille after runs, avoid harsh solvents on the finish, and check mounting screws periodically. If the boat sees frequent washdowns, keep the rear side of the installation dry and ventilated so moisture does not linger around the mounting area.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"No \/ White Classic","offer_id":52262476841141,"sku":"QBP428160-V1","price":808.33,"currency_code":"USD","in_stock":false},{"title":"No \/ White Sport","offer_id":52262476873909,"sku":"QBP428160-V2","price":808.33,"currency_code":"USD","in_stock":false},{"title":"No \/ Titanium Sport","offer_id":52262476906677,"sku":"QBP428160-V3","price":808.33,"currency_code":"USD","in_stock":false},{"title":"Yes \/ White Sport","offer_id":52262476939445,"sku":"QBP428160-V4","price":885.32,"currency_code":"USD","in_stock":false},{"title":"Yes \/ Titanium Sport","offer_id":52262476972213,"sku":"QBP428160-V5","price":885.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294231_qbp428160.webp?v=1771364726"},{"product_id":"qbp428597","title":"JL Audio MHD Marine Amplifier, Class D","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio MHD marine amplifier is a compact Class D marine audio amplifier range offered in 1-channel, 4-channel, and 5-channel configurations, with both 12V and 24V negative-ground options. Depending on the configuration, rated output ranges from 750 W x 1 (monoblock) to 150 W x 4 (4-channel) and 100 W x 4 plus 500 W x 1 (5-channel).\u003c\/p\u003e\u003cp\u003eThese amps are built for real onboard installs where salt, UV, and constant vibration are part of the deal. The chassis uses a powder-coated aluminum housing with stainless hardware, and the controls sit behind a gasketed cover so settings stay protected once the system is dialed in.\u003c\/p\u003e\u003cp\u003eUse the channel count to match how your boat is zoned and how you want to run a subwoofer. The voltage option matters just as much: the 24V versions are meant for 24V systems, and the non-24V versions are meant for 12V systems.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eClass D marine amplifier platform available as 1-channel, 4-channel, or 5-channel depending on configuration\u003c\/li\u003e\n\u003cli\u003eMonoblock configuration rated at 750 W x 1 into 1.5 to 4 ohms, and it can be used full-range or for a dedicated subwoofer channel\u003c\/li\u003e\n\u003cli\u003e4-channel configuration rated at 150 W x 4, with the ability to bridge to 300 W x 2 for higher output on two channels\u003c\/li\u003e\n\u003cli\u003e5-channel configuration rated at 100 W x 4 plus 500 W x 1 to run four full-range channels with a dedicated subwoofer channel\u003c\/li\u003e\n\u003cli\u003e12V versions are for 12 volt, negative-ground electrical systems; 24V versions are for 24 volt, negative-ground electrical systems\u003c\/li\u003e\n\u003cli\u003ePowder-coated aluminum housing with stainless hardware and a gasketed control cover to help resist corrosion around saltwater\u003c\/li\u003e\n\u003cli\u003eRemovable power and speaker plug connections that make wiring easier when the mounting space is tight\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations that change the channel count and whether the amplifier is intended for a 24V electrical system.\u003c\/p\u003e\u003cp\u003eThe channel layout affects how many speaker zones and subwoofer channels you can run from a single chassis. The 24V option indicates a model built for 24V negative-ground power, not a 12V amp that can be switched over.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-03320-00: Channels 1, 24 V No. Monoblock format that fits systems where one amplifier channel is dedicated to a subwoofer or a single full-range run.\u003c\/li\u003e\n\u003cli\u003e010-03319-00: Channels 4, 24 V No. Four channels cover two stereo zones, and bridging support helps when you need more output on fewer channels.\u003c\/li\u003e\n\u003cli\u003e010-03103-00: Channels 5, 24 V No. Four main channels plus a subwoofer channel to keep a full boat system on one amplifier.\u003c\/li\u003e\n\u003cli\u003e010-03104-00: Channels 4, 24 V Yes. 4-channel layout intended for boats with a 24V negative-ground house bank or audio power feed.\u003c\/li\u003e\n\u003cli\u003e010-03321-00: Channels 5, 24 V Yes. 5-channel layout for 24V systems, combining four full-range channels with a dedicated subwoofer channel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting spot like you would for any high-power marine audio component: a dry location with airflow, away from direct spray and standing water, and not inside an engine compartment. Leave room to route power and speaker wiring without tight bends so the plugs can be removed for service later.\u003c\/p\u003e\u003cp\u003eOn the electrical side, confirm your vessel system voltage first, then size power and ground cabling for the run length and expected current draw. Use proper fuse protection at the power source, keep power and signal wiring separated where possible, and secure everything so it cannot chafe through under vibration.\u003c\/p\u003e\u003ch6\u003eCompatibility and system planning\u003c\/h6\u003e\u003cp\u003eBefore ordering, map out how many speaker zones you are powering and whether the subwoofer will be on its own channel or integrated into a multi-channel plan. The 1-channel option fits a dedicated sub amp role, the 4-channel option matches two stereo zones or bridged use, and the 5-channel option covers four full-range channels with a sub channel in the same chassis.\u003c\/p\u003e\u003cp\u003eMatch the amplifier configuration to your speaker wiring and load expectations, and confirm that the version you select matches your power system (12V negative-ground versus 24V negative-ground). If your boat has both 12V and 24V circuits, keep the amplifier on the correct bank rather than relying on adapters or improvised voltage changes.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis range makes sense for boats that need high output in a space that is limited, such as console lockers, helm cabinetry, cabin audio racks, or under-seat installations. It is also a good fit when you want a clean system layout with fewer boxes, especially with the 5-channel setup that can cover a full cockpit and subwoofer system.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter installation, recheck fasteners and wiring strain relief after the first few trips, since marine vibration can loosen anything that is not secured. Keep terminals clean, address corrosion early, and avoid directing pressure-washer spray at wiring and connections even if the control area is covered.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"1 \/ No","offer_id":52262477004981,"sku":"QBP428597-V1","price":1100.89,"currency_code":"USD","in_stock":false},{"title":"4 \/ No","offer_id":52262477037749,"sku":"QBP428597-V2","price":1185.58,"currency_code":"USD","in_stock":false},{"title":"5 \/ No","offer_id":52262477070517,"sku":"QBP428597-V3","price":1397.28,"currency_code":"USD","in_stock":false},{"title":"4 \/ Yes","offer_id":52262477103285,"sku":"QBP428597-V4","price":1270.25,"currency_code":"USD","in_stock":false},{"title":"5 \/ Yes","offer_id":52262477136053,"sku":"QBP428597-V5","price":1439.62,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294251_qbp428597.webp?v=1771364728"},{"product_id":"qbp428931","title":"JL Audio MX Marine and Powersports Amplifiers, Class D, 12V, IPX7","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio MX is a range of Class D marine and powersports amplifiers for 12 volt, negative-ground audio systems. Across the line you can choose 1-, 3-, or 4-channel layouts with total power ratings from 280 W to 600 W, and water-resistance ratings of IPX6 or IPX7 depending on the model.\u003c\/p\u003e\u003cp\u003eThey accept RCA inputs and can also be fed from speaker-level outputs using an adaptor, with an input-voltage switch to match the signal (low range 250 mV to 4 V; high range up to 14 V or 15 V, depending on model). Controls sit under a gasketed cover so you can set gain and filter settings and then close it back up for use on board.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBuilt for 12 volt, negative-ground electrical systems\u003c\/li\u003e\n\u003cli\u003eChannel options include monoblock subwoofer amps (1 channel), a system amp (3 channels), and full-range amps (4 channels)\u003c\/li\u003e\n\u003cli\u003eWater-resistance varies by model: IPX7 on the monoblock and 3-channel units, IPX6 on the 4-channel units\u003c\/li\u003e\n\u003cli\u003eSelectable input-voltage ranges to suit preamp outputs or speaker-level feeds (adaptor required for speaker-level)\u003c\/li\u003e\n\u003cli\u003eCovered adjustment area with a gasketed panel that gets reinstalled after setup\u003c\/li\u003e\n\u003cli\u003e4-channel models support 2CH, 3CH, and 4CH input modes plus bridged output options for flexible speaker wiring\u003c\/li\u003e\n\u003cli\u003eElectrical requirements scale with output: fuse ratings from 30 A to 60 A and minimum power and ground wire from 8 AWG to 4 AWG\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis amplifier range is offered in several configurations. The channel count and total power are the main differences, and the installation requirements such as wire size, fuse rating, and water-resistance rating follow the specific model.\u003c\/p\u003e\u003cp\u003eAll versions are intended for 12 volt, negative-ground systems and use a covered control panel for gain and filter settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-03324-00: 1 channel, 300 W total power. A monoblock subwoofer amplifier that can be used alone or as a matched stereo pair.\u003c\/li\u003e\n\u003cli\u003e010-03325-00: 1 channel, 500 W total power. A monoblock subwoofer amplifier with more output for a single subwoofer channel.\u003c\/li\u003e\n\u003cli\u003e010-03326-00: 3 channels, 600 W total power. Runs a pair of main speakers plus a dedicated subwoofer channel from one chassis.\u003c\/li\u003e\n\u003cli\u003e010-03105-00: 4 channels, 280 W total power. A full-range amp for four speakers, with the option to bridge channels when the speaker layout calls for it.\u003c\/li\u003e\n\u003cli\u003e010-03106-00: 4 channels, 500 W total power. A higher-power full-range option for four speakers, with bridged outputs available for different wiring plans.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan a mounting spot that stays dry and has air around it, such as inside the console, behind a helm panel, or in a cabin locker. Even the water-resistant models should not be installed where they will be directly exposed to the elements, submerged, or hit with high-pressure spray, and they should not be mounted in an engine compartment or other high-heat spaces.\u003c\/p\u003e\u003cp\u003eRun power and ground to the battery or a properly sized distribution point, and protect the positive lead with an appropriate fuse mounted within 18 in (45 cm) of the battery connection. Use the minimum wire size specified for the model (8 AWG or 4 AWG) and secure all wiring so it cannot chafe on fiberglass edges or work loose from vibration.\u003c\/p\u003e\u003cp\u003eAfter the wiring is complete, set input sensitivity and the filter options for your speakers and subwoofer, then reinstall the gasketed cover over the controls before putting the boat back into service. On IPX7 versions, the rating is based on immersion up to 1 meter (3.28 ft) for up to 30 minutes with the control cover properly installed.\u003c\/p\u003e\u003ch6\u003eCompatibility and system planning\u003c\/h6\u003e\u003cp\u003eThese amplifiers pair well with marine source units that provide RCA pre-outs. When the source only has speaker outputs, a speaker-wire-to-RCA adaptor can be used and the input-voltage switch can be set to match the higher signal level.\u003c\/p\u003e\u003cp\u003eThis range fits setups where you are adding cockpit and cabin speakers, building a simple system with a dedicated subwoofer channel, or moving speaker power off the head unit so the system stays clean at cruising volume. Match the channel count and total power to your speaker layout and to whether the subwoofer is being powered from a monoblock or from a dedicated sub channel on a system amplifier.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"1 \/ 300 W","offer_id":52262477168821,"sku":"QBP428931-V1","price":321.79,"currency_code":"USD","in_stock":false},{"title":"1 \/ 500 W","offer_id":52262477201589,"sku":"QBP428931-V2","price":448.81,"currency_code":"USD","in_stock":false},{"title":"3 \/ 600 W","offer_id":52262477234357,"sku":"QBP428931-V3","price":491.16,"currency_code":"USD","in_stock":false},{"title":"4 \/ 280 W","offer_id":52262477267125,"sku":"QBP428931-V4","price":321.79,"currency_code":"USD","in_stock":false},{"title":"4 \/ 500 W","offer_id":52262477299893,"sku":"QBP428931-V5","price":448.81,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294271_qbp428931.webp?v=1771364730"},{"product_id":"qbp429096","title":"JL Audio M6 ETX Enclosed Tower Speaker Covers, For ETXv2\/v3 Systems, 2pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio ETX-CVR speaker covers are neoprene covers that protect ETX enclosed tower speaker systems during storage and trailering. They come in two sizes for 7.7-inch and 8.8-inch enclosures, and each cover uses 3 mm neoprene laminated with dark gray spandex with a front #5 zipper with a locking slider.\u003c\/p\u003e\u003cp\u003eThe material is UV-resistant and has been tested for over 1,000 hours of salt\/fog and UV exposure. Small laser-cut holes at the bottom let water drain out while keeping insects out, which matters when the boat sits at the dock or on the trailer.\u003c\/p\u003e\u003cp\u003eThis is a good match for wake and surf boats, center consoles, and cruisers that run tower speakers and spend time in open air between outings, especially if you trailer often or keep the boat uncovered.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo size options to match 7.7-inch or 8.8-inch ETX enclosed tower speaker systems\u003c\/li\u003e\n\u003cli\u003e3 mm neoprene construction with dark gray spandex lamination\u003c\/li\u003e\n\u003cli\u003eUV-resistant material with over 1,000 hours of salt\/fog and UV testing\u003c\/li\u003e\n\u003cli\u003eFront #5 zipper with locking slider for quick on and off\u003c\/li\u003e\n\u003cli\u003eLaser-cut drain holes at the bottom to shed water while keeping insects out\u003c\/li\u003e\n\u003cli\u003eCut and stretch allow use with different mounting clamps and applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis cover set is offered in multiple configurations to match different ETX enclosed tower speaker sizes.\u003c\/p\u003e\u003cp\u003eThe main difference between the variants is the enclosure size the covers fit. Construction details like the 3 mm neoprene build, front zipper closure, and bottom drain holes remain consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-13834-00: Size 7.7 in. Sized for 7.7-inch ETX enclosed tower speaker systems so the cover sits snug without fighting the zipper.\u003c\/li\u003e\n\u003cli\u003e010-13835-00: Size 8.8 in. Sized for 8.8-inch ETX enclosed tower speaker systems, giving full coverage over the enclosure while it stays mounted on the tower.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eTwo protective speaker covers (sold as a pair)\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThese covers are made for ETX enclosed tower speaker systems (v2 or v3). The shape works with a range of mounting clamp styles, so you can typically cover the speakers without removing tower hardware.\u003c\/p\u003e\u003cp\u003eMatch the cover size to your speaker enclosure size. If you are unsure whether your speakers are the 7.7-inch or 8.8-inch version, confirm the enclosure size before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eSlip each cover over the speaker enclosure, orient the drain holes at the lowest point, then close the front zipper. Take a second to check that the zipper is not pinching a cable or tower hardware so the cover lays flat.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse with clean, fresh water and let the covers air dry. Avoid harsh chemicals or aggressive cleaners that can shorten the life of neoprene and the zipper hardware.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"7.7\"","offer_id":52262477332661,"sku":"QBP429096-V1","price":180.14,"currency_code":"USD","in_stock":false},{"title":"8.8\"","offer_id":52262477365429,"sku":"QBP429096-V2","price":180.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294291_qbp429096.webp?v=1771364731"},{"product_id":"qbp429853","title":"JL Audio MVi Marine Amplifiers, Integrated DSP, Class D","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio MVi Marine Amplifier is a DSP-equipped marine audio amplifier family for 12 V, negative-ground boats (10 to 15 V DC operating range), with options from 1 to 8 channels and 400 W to 1000 W total power.\u003c\/p\u003e\u003cp\u003eSetup is handled in software instead of on-board knobs. Configuration and tuning are done through the TüN application using a USB connection, and the system can be expanded with optional accessories for network control and wireless tuning.\u003c\/p\u003e\u003cp\u003eMount it vertically with the connections pointing downward to achieve an IPX2 water-resistance rating, and treat it like any other high-current audio component: protect it from direct weather, standing water, and high-pressure spray.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDSP configuration and control through the TüN application via USB (no on-board tuning knobs)\u003c\/li\u003e\n\u003cli\u003e12 V DC, negative-ground operation with a 10 to 15 V DC operating range\u003c\/li\u003e\n\u003cli\u003eDifferential-balanced RCA inputs for noise rejection, with high input capability up to 8 or 16 VRMS depending on model\u003c\/li\u003e\n\u003cli\u003eLine-level RCA pre-outs (max 4 V RMS) for feeding additional amplifiers\u003c\/li\u003e\n\u003cli\u003eClass D topology with 2nd-generation NexD2 switching technology\u003c\/li\u003e\n\u003cli\u003eIPX2 water-resistance rating when mounted vertically with connections pointed downward\u003c\/li\u003e\n\u003cli\u003ePower and ground connections accept up to 4 AWG copper; fuse or ignition-protected breaker should be within 7 in (18 cm) of the battery connection\u003c\/li\u003e\n\u003cli\u003eJLid-COMM port for optional accessories such as an MVi-HUB network hub, digital remote controller, or Bluetooth communicator\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis amplifier family is offered in multiple configurations that vary mainly by channel count (1, 2, 4, 5, 6, or 8 channels) and total power (400 W to 1000 W).\u003c\/p\u003e\u003cp\u003eThe range includes monoblock models intended for subwoofers, full-range multi-channel models for speaker zones around the boat, and 5-channel system amplifiers for mixed speaker and subwoofer setups from a single chassis.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the amplifier in a dry, well-ventilated location that does not interfere with existing systems. Secure it so it cannot move under vibration or impact, and keep enough open air around the chassis for heat to shed during long listening sessions.\u003c\/p\u003e\u003cp\u003eFor best moisture management, position it vertically with all connections pointing downward and route wiring so condensation drips away from the connectors. IPX2 water-resistance is achieved in that orientation, but it is still not a part to mount where it can be submerged or blasted during washdowns.\u003c\/p\u003e\u003cp\u003eAfter wiring, connect with USB and use the TüN interface to set input routing, output levels, and presets. Final tuning is best done once the system is playing on the water, with the charging system at normal voltage.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThese amplifiers are intended for 12 V DC, negative-ground systems only. Run tinned copper power and ground, keep grounds consistent across the audio system, and protect the main feed with an appropriate fuse or ignition-protected breaker installed within 7 inches (18 cm) of the battery connection, sized for the amplifier and the cable run.\u003c\/p\u003e\u003cp\u003eThe power connector is sized for up to 4 AWG copper. A remote turn-on lead from the source unit is used to switch the amplifier on, and a switched 12 V source can be used when a dedicated remote output is not available.\u003c\/p\u003e\u003ch6\u003eCompatibility and signal routing\u003c\/h6\u003e\u003cp\u003eSignal connections are RCA, and the differential-balanced input stage helps keep alternator whine and other noise out of the system on longer cable runs. Depending on the model, the input section can accept up to 8 VRMS or 16 VRMS, which can simplify integration with higher-voltage source outputs.\u003c\/p\u003e\u003cp\u003eLine-level pre-outs (max 4 V RMS) support system expansion without splitting source outputs at the helm, and the JLid-COMM port allows add-on control and multi-amplifier integration when you are building out a larger audio system.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eUse the monoblock versions when you want a dedicated subwoofer channel, or step up to multi-channel models when you are powering cockpit, cabin, tower, or transom speakers with DSP control. The 5-channel options cover a mixed system where you want speakers and a subwoofer handled in one amplifier.\u003c\/p\u003e\u003cp\u003eThis lineup fits boats where the audio system needs careful tuning to stay clean at speed, and where installers want a repeatable setup with saved presets for different listening conditions.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter a few trips, recheck mounting hardware and the power connector set screws, and inspect wiring for chafe where it passes through bulkheads or lockers. Keep ventilation paths clear and address any signs of moisture tracking toward connectors by improving cable routing and drip loops.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"1 \/ 600 W","offer_id":52262477463733,"sku":"QBP429853-V1","price":762.15,"currency_code":"USD","in_stock":false},{"title":"1 \/ 1000 W","offer_id":52262477496501,"sku":"QBP429853-V2","price":1058.54,"currency_code":"USD","in_stock":false},{"title":"2 \/ 600 W","offer_id":52262477529269,"sku":"QBP429853-V3","price":1099.99,"currency_code":"USD","in_stock":false},{"title":"4 \/ 400 W","offer_id":52262477562037,"sku":"QBP429853-V4","price":931.52,"currency_code":"USD","in_stock":false},{"title":"5 \/ 700 W","offer_id":52262477594805,"sku":"QBP429853-V5","price":1100.89,"currency_code":"USD","in_stock":false},{"title":"5 \/ 1000 W","offer_id":52262477627573,"sku":"QBP429853-V6","price":1312.6,"currency_code":"USD","in_stock":false},{"title":"6 \/ 600 W","offer_id":52262477660341,"sku":"QBP429853-V7","price":1227.91,"currency_code":"USD","in_stock":false},{"title":"8 \/ 800 W","offer_id":52262477693109,"sku":"QBP429853-V8","price":1397.28,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294295_qbp429853.webp?v=1771364734"},{"product_id":"qbp430703","title":"JL Audio MBT Marine Bluetooth Audio Receiver, aptX HD","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio MBT is a weatherproof Bluetooth audio receiver family that adds wireless streaming to a boat or powersports sound system through line-level RCA outputs. Connection range is rated up to 35 ft (11 m), and audio bandwidth covers 20 Hz to 20 kHz (+\/- 1 dB).\u003c\/p\u003e\u003cp\u003eBoth configurations are meant to feed an amplifier or a head unit with line-level\/aux inputs, not to power speakers directly. Output level is 4V RMS, with operating voltage depending on version (10 to 16 VDC for the receiver-only unit, 8 to 16 VDC for the controller\/receiver).\u003c\/p\u003e\u003cp\u003eThis is a solid fit for boats that already have an amp and speakers installed and just need a clean way to stream from a phone or tablet. The controller version also suits helms where physical volume and track buttons matter, especially when the streaming device stays stowed and dry.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBluetooth A2DP streaming with Qualcomm aptX-HD support and a rated connection range up to 35 ft (11 m).\u003c\/li\u003e\n\u003cli\u003e20 Hz to 20 kHz frequency response (+\/- 1 dB) for full-range music playback.\u003c\/li\u003e\n\u003cli\u003eLine-level RCA connections for amplifiers or aux\/line inputs, with 4V RMS output level.\u003c\/li\u003e\n\u003cli\u003eReceiver-only configuration (MBT-RXv2): IPX7 water resistance rating, 10 to 16 VDC operation, one stereo RCA output, 1 A remote turn-on output, and a 2 A fuse value.\u003c\/li\u003e\n\u003cli\u003eController\/receiver configuration (MBT-CRXv3): IP67 water resistance rating, 8 to 16 VDC operation, backlit helm control interface, and single-hole mounting with a threaded collar.\u003c\/li\u003e\n\u003cli\u003eMBT-CRXv3 adds two stereo zone outputs plus a dedicated subwoofer output (RCA) for multi-zone systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two configurations that share the same core job: getting Bluetooth audio into a line-level marine system.\u003c\/p\u003e\u003cp\u003eThe main differences are whether there is a dash controller, how many preamp outputs are available, and the water-resistance rating and operating voltage range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-03377-00 - Controller: No. MBT-RXv2 receiver-only module with one stereo RCA output and a 1 A remote turn-on output. Playback is controlled from the paired streaming device.\u003c\/li\u003e\n\u003cli\u003e010-03378-00 - Controller: Yes. MBT-CRXv3 controller\/receiver with backlit controls, two stereo zone outputs, and a subwoofer output (RCA). It keeps volume and track control at the helm while the streaming device stays out of the way.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFor the receiver-only MBT-RXv2, mount the module in a protected location close to the amplifier or the input you are feeding, then connect 10 to 16 VDC power and the RCA output to a line-level input. The remote output can be used to trigger an amplifier turn-on lead when the system needs a switched signal.\u003c\/p\u003e\u003cp\u003eFor the MBT-CRXv3, the control face installs through a single cutout and clamps using a threaded collar. An adaptor plate is included for front-mount installs, thicker panels, or situations where rear access is limited. Route wiring away from sharp edges and moving parts, then secure it so it cannot chafe under vibration.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThese units are line-level sources and require an amplifier, powered speakers with RCA inputs, or a stereo\/head unit with an auxiliary or line-level input. They are not intended to drive loudspeakers directly.\u003c\/p\u003e\u003cp\u003eBluetooth range is rated up to 35 ft (11 m) and can drop when the receiver is buried behind metal, wiring looms, or closed compartments. On smaller boats, placing the unit closer to the cockpit or helm area often helps keep the connection steady.\u003c\/p\u003e\u003ch6\u003eCare and mounting environment\u003c\/h6\u003e\u003cp\u003eThe housings are water-resistant for outdoor marine use, but they should not be mounted where they can sit submerged for long periods or take direct high-pressure spray. Keep connectors supported, keep wiring runs tidy, and avoid high-heat locations like engine compartments.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"No","offer_id":52262477725877,"sku":"QBP430703-V1","price":65.51,"currency_code":"USD","in_stock":false},{"title":"Yes","offer_id":52262477758645,"sku":"QBP430703-V2","price":174.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294327_qbp430703.webp?v=1771364735"},{"product_id":"qbp430767","title":"JL Audio Powered Network Cable, For NMEA 2000 MediaMaster Source Units","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio Powered Network Cable for MediaMaster Source Units is a powered NMEA 2000 cable used to link a compatible MediaMaster source unit with one MediaMaster MMR-40 NMEA 2000 Network Controller or a compatible MFD on a small, stand-alone NMEA 2000 segment.\u003c\/p\u003e\u003cp\u003eIt is offered in 6 ft (1.83 m) and 25 ft (7.62 m) lengths for clean routing from the helm area to an audio source location, while keeping the network simple and contained.\u003c\/p\u003e\u003cp\u003eThis cable setup supports a maximum of two NMEA 2000 devices. If your boat has additional NMEA 2000 devices on the same network, plan on a full NMEA 2000 backbone instead, since this powered cable is not used in that type of network build.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCreates an isolated, stand-alone NMEA 2000 segment to connect a compatible MediaMaster source unit with one MMR-40 controller or a compatible MFD.\u003c\/li\u003e\n\u003cli\u003eSupports a maximum of two NMEA 2000 devices on the segment.\u003c\/li\u003e\n\u003cli\u003eLength options: 6 ft (1.83 m) or 25 ft (7.62 m) for short runs or longer routing through consoles and rigging paths.\u003c\/li\u003e\n\u003cli\u003eFor MM100s (not MM100s-BE), an adapter is required: MMC-DN2K-1 or MMC-DN2K-6 to adapt the Deutsch connector to an NMEA 2000 5-pin Micro-C connector.\u003c\/li\u003e\n\u003cli\u003eNot used with a full NMEA 2000 backbone when the network includes additional NMEA 2000 devices beyond this two-device limit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is available in multiple lengths to match different helm-to-source routing distances on board.\u003c\/p\u003e\u003cp\u003eThe only difference between the options is cable length.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-13858-00: Length 6 ft (1.83 m). A shorter run that keeps routing tidy when the source unit and control point are close together.\u003c\/li\u003e\n\u003cli\u003e010-13859-00: Length 25 ft (7.62 m). Extra reach for boats where the source unit is mounted farther from the helm or where the cable needs to follow longer rigging routes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003ePowered network cable (selected length)\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the cable like other network wiring on a boat: support it along the run, avoid tight bends, keep it away from chafe points, and leave a small service loop at each end for future access. If the run passes through a console or bulkhead, use proper grommets or conduit to protect the jacket.\u003c\/p\u003e\u003cp\u003eBecause this cable is intended for a small, stand-alone NMEA 2000 segment, confirm your system plan before pulling wire. It fits setups where a single compatible MediaMaster source unit needs NMEA 2000 integration with one MMR-40 controller or a compatible MFD, without building out a larger NMEA 2000 backbone.\u003c\/p\u003e\u003ch6\u003eCompatibility and system planning\u003c\/h6\u003e\u003cp\u003eThis cable is a good match for boaters who want MediaMaster control and integration on NMEA 2000 with a simple two-device segment, such as a helm display paired with an audio source unit. If your vessel already runs multiple NMEA 2000 instruments or you need to add more devices later, a standard NMEA 2000 backbone is the better network foundation.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"6 ft","offer_id":52262477791413,"sku":"QBP430767-V1","price":60.05,"currency_code":"USD","in_stock":false},{"title":"25 ft","offer_id":52262477824181,"sku":"QBP430767-V2","price":81.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294331_qbp430767.webp?v=1771364736"},{"product_id":"qbp430783","title":"JL Audio StowAway Enclosed Subwoofer System, 300W RMS","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio StowAway is an enclosed subwoofer system with a sealed, down-firing hard-shell enclosure and 300 W continuous power handling. It is sold in 10 in and 12 in sizes, with either 2 ohm or 4 ohm impedance to match different amplifier loads.\u003c\/p\u003e\u003cp\u003eThe enclosure is prewired with selectable harness exits underneath at opposite ends, which helps when you are routing wire through a locker or under a helm. It is water-resistant for marine environments, but it is not meant to be submerged or hit with high-pressure spray.\u003c\/p\u003e\u003cp\u003eThis setup makes sense when you want added low-end on a center console, bay boat, or cruiser without building a custom box. Mount it where it stays dry and where you can fasten it down securely so it cannot move under pounding or wake impacts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e300 W continuous power handling, with recommended amplifier power of 75 to 300 W\u003c\/li\u003e\n\u003cli\u003eSealed enclosure with a down-firing subwoofer layout that keeps the driver protected in storage and footwell areas\u003c\/li\u003e\n\u003cli\u003eWater-resistant enclosure for marine use, with guidance to avoid submersion and high-pressure water spray\u003c\/li\u003e\n\u003cli\u003eSelectable harness exits underneath at opposite ends for cleaner cable routing\u003c\/li\u003e\n\u003cli\u003eSlotted mounting feet at each corner to help with off-the-floor installs and tight mounting access\u003c\/li\u003e\n\u003cli\u003eBlack texture finish with a protective mesh grille\u003c\/li\u003e\n\u003cli\u003eOffered in 10 in and 12 in sizes, with 2 ohm or 4 ohm impedance options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations based on subwoofer size and nominal impedance.\u003c\/p\u003e\u003cp\u003eThe 10 in and 12 in versions share the same basic enclosure approach and 300 W continuous power handling, while the 2 ohm or 4 ohm option changes the amplifier load. Match the impedance to an amplifier that is rated stable at that load for a subwoofer channel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-03454-00: Size 10 in, Impedance 2 ohm. A 2 ohm load can draw more from the amplifier than a 4 ohm option, so confirm the amp is rated for 2 ohm operation on the sub channel.\u003c\/li\u003e\n\u003cli\u003e010-03584-00: Size 10 in, Impedance 4 ohm. A 4 ohm load is a common match for many mono and bridged sub channels and can be helpful when you want more amplifier headroom.\u003c\/li\u003e\n\u003cli\u003e010-03586-00: Size 12 in, Impedance 2 ohm. The larger enclosure footprint needs more mounting space, and the 2 ohm load requires an amplifier that is stable at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e010-03588-00: Size 12 in, Impedance 4 ohm. The 12 in option adds enclosure size compared with the 10 in model while keeping a 4 ohm load for amplifier matching.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eEnclosed subwoofer system\u003c\/li\u003e\n\u003cli\u003eProtective mesh grille\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMounting hardware is not included, so plan fasteners and backing based on your surface and access. The final mounting method should hold the enclosure firmly to prevent movement and vibration, especially in chop.\u003c\/p\u003e\u003cp\u003eKeep the unit out of engine compartments and away from areas that see extreme heat. Before drilling or fastening, confirm there are no hidden wires, hoses, or fuel lines behind the mounting surface, and disconnect the battery system while making connections.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a passive subwoofer system that requires an external amplifier. Use an amplifier rated within the recommended 75 to 300 W range, and match the amplifier output to the 2 ohm or 4 ohm impedance of the configuration you select.\u003c\/p\u003e\u003cp\u003eFor space planning, the 10 in enclosure measures 18.0 in W x 12.5 in D x 7.0 in H, with mounting location needs of about 16.16 in width and 10.66 in depth. The 12 in enclosure measures 21.78 in W x 15.16 in D x 8.23 in H, with mounting location needs of about 19.29 in width and 12.66 in depth.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis enclosure style works well under seating, inside a dry console compartment, or along a bulkhead where gear may slide around and the subwoofer still needs protection. It is a good match for boats that want fuller low-end without committing to a custom fiberglass or wood enclosure build.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse with freshwater and mild soap when needed, and avoid high-pressure spray. If the mounting area can flood or hold standing water, relocate the enclosure to a drier compartment.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"10\" \/ 2 ohm","offer_id":52262477856949,"sku":"QBP430783-V1","price":702.87,"currency_code":"USD","in_stock":false},{"title":"10\" \/ 4 ohm","offer_id":52262477889717,"sku":"QBP430783-V2","price":702.87,"currency_code":"USD","in_stock":false},{"title":"12\" \/ 2 ohm","offer_id":52262477922485,"sku":"QBP430783-V3","price":787.56,"currency_code":"USD","in_stock":false},{"title":"12\" \/ 4 ohm","offer_id":52262477955253,"sku":"QBP430783-V4","price":787.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294333_qbp430783.jpg?v=1771364738"},{"product_id":"qbp431779","title":"JL Audio XMD-WHTAICY Marine RCA Y-Adapter, 2-Channel, Twisted-Pair, OFC Copper, Molded Connectors, Brass Contacts","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio Marine RCA Y-adapter is an RCA interconnect adapter for splitting or adapting low-level audio connections in a boat stereo system. It uses a tight twisted-pair layout with oxygen-free copper conductors and polyethylene dielectrics to help keep noise down in a real boat wiring environment.\u003c\/p\u003e\u003cp\u003eThe cable is finished in a white, small-diameter PVC jacket with molded connector bodies that are short by design for tight spaces behind a helm, in a glovebox stereo cavity, or inside an amp rack. Connection points use machined brass contact elements with nickel plating.\u003c\/p\u003e\u003cp\u003ePick the connector layout that matches what is on your gear (male RCA plug vs female RCA jack). No power is required, and it fits standard RCA audio connections used on marine source units, processors, and amplifiers.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRCA Y-adapter format for line-level audio interconnects in marine stereo systems\u003c\/li\u003e\n\u003cli\u003eTight twisted-pair construction with oxygen-free copper conductors and polyethylene dielectrics\u003c\/li\u003e\n\u003cli\u003eWhite, small-diameter PVC jacket that routes cleanly through crowded rigging paths\u003c\/li\u003e\n\u003cli\u003eMolded connector bodies with soft grips and a short profile for tight installs\u003c\/li\u003e\n\u003cli\u003eMachined brass contact elements with nickel plating for consistent connections\u003c\/li\u003e\n\u003cli\u003eFlexible silicone channel splitters to help when routing through small openings\u003c\/li\u003e\n\u003cli\u003eTwo connector layouts available: 1 female to 2 male, or 1 male to 2 female\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations to match the connector layout you need at the equipment end of the run.\u003c\/p\u003e\u003cp\u003eThe difference between variants is the RCA gender arrangement (how many female jacks vs male plugs). Core construction details like twisted-pair conductors, molded connector bodies, and machined brass connector elements remain consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-13552-00: Female Jack Quantity 1 (1 female RCA to 2 male RCA). This layout is commonly used when a single RCA connection needs to feed two RCA inputs without changing the rest of the cable run.\u003c\/li\u003e\n\u003cli\u003e010-13553-00: Female Jack Quantity 2 (1 male RCA to 2 female RCA). This layout is commonly used when you need a single male RCA connection that branches into two female jack connection points for standard RCA cables.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThese adapters use standard RCA connectors (male plug and female jack), the same style found on most marine stereos, signal processors, and amplifiers. Confirm whether the port you are plugging into is a male plug or a female jack, and match the variant accordingly.\u003c\/p\u003e\u003cp\u003eIn cramped installations, pay attention to clearance around the RCA ports. A short connector body helps when equipment is mounted close to a bulkhead or stacked in a rack.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the adapter where it will not be under constant strain, and secure nearby cabling so vibration does not work the connection loose over time. Keeping RCA interconnects separated from high-current power wiring and switching devices helps reduce the chance of induced noise.\u003c\/p\u003e\u003cp\u003eIn most audio systems, Y-adapters are used to split one output into two inputs. Using a Y-adapter to combine two source outputs into one input can create level and impedance issues, so that wiring approach should be avoided unless the system is specifically built for it.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis adapter fits common boat audio scenarios like feeding two amplifier inputs from a single pre-out, tidying up an amp rack with limited cable reach, or adapting a connection when the existing run is the wrong gender at one end. It is a practical match for boats running multi-amp or multi-zone audio where cable routing space is tight and clean signal paths matter.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"1","offer_id":52262478086325,"sku":"QBP431779-V1","price":19.94,"currency_code":"USD","in_stock":false},{"title":"2","offer_id":52262478119093,"sku":"QBP431779-V2","price":19.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294337_qbp431779.webp?v=1771364739"},{"product_id":"qbp432454","title":"JL Audio Core RCA Audio Interconnect Splitter, Female RCA","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio Core RCA audio interconnect splitter is a practical way to split one line-level audio output into multiple outputs when you are wiring a multi-amp or multi-zone stereo system on a boat.\u003c\/p\u003e\u003cp\u003eIt sits in the RCA signal path between a head unit or source and downstream amplifier inputs. The range is offered as a 2-way or 4-way output splitter, depending on how many RCA runs you need to feed with the same signal.\u003c\/p\u003e\u003cp\u003eFor best long-term results on board, place it where the connection stays protected, then secure the connected RCA cables so vibration does not work the plugs loose over time.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSplits a single audio output connection into either two or four outputs, depending on the selected configuration\u003c\/li\u003e\n\u003cli\u003eIntended for standard RCA interconnect runs used for typical marine line-level audio signals\u003c\/li\u003e\n\u003cli\u003eHelpful when feeding multiple amplifier inputs from one source output, such as adding a subwoofer amplifier or sharing the same program audio across multiple inputs\u003c\/li\u003e\n\u003cli\u003eInline form factor that fits easily behind the helm or inside an electronics locker\u003c\/li\u003e\n\u003cli\u003eReduces extra source wiring when the audio system has more amplifier inputs than available pre-outs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in more than one output configuration so the splitter matches the number of downstream audio runs in your system.\u003c\/p\u003e\u003cp\u003eThe stated difference between variants is the number of outputs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-13447-00: Outputs 2-way. Commonly used when one source output needs to feed two RCA runs, such as a main amplifier input and a separate subwoofer amplifier input.\u003c\/li\u003e\n\u003cli\u003e010-13448-00: Outputs 4-way. Commonly used when the same source output needs to be distributed across four RCA runs for multiple amplifier channels or zone inputs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the splitter location close to the source output to avoid creating unnecessary cable slack. Support the adapter and the connected RCA cables with strain relief so movement from vibration and trailering does not pull directly on the jacks.\u003c\/p\u003e\u003cp\u003eIf the install area is exposed to spray or washdowns, route the connections higher and farther back in the console or locker, and keep the RCA ends protected the same way you would any other low-voltage audio connector.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis splitter is intended for line-level audio interconnects. It does not replace separate zone outputs when you need independent signal paths for different source selection or different volume behavior across zones.\u003c\/p\u003e\u003cp\u003eIt is a good match for boats where the head unit has limited pre-outs but the system layout requires more than one amplifier input to receive the same audio signal.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"2-way","offer_id":52262478151861,"sku":"QBP432454-V1","price":17.95,"currency_code":"USD","in_stock":false},{"title":"4-way","offer_id":52262478184629,"sku":"QBP432454-V2","price":24.93,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294339_qbp432454.webp?v=1771364740"},{"product_id":"qbp434863","title":"JL Audio Panel-Mount Audio Connector, Sealed Rubber Cover","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis JL Audio panel-mount audio connector is a clean way to bring USB and or 3.5 mm AUX access to a helm, dash, or cabin panel while keeping the stereo connections tucked behind the bulkhead.\u003c\/p\u003e\u003cp\u003eEach version mounts through a drilled hole and tightens from the backside with a plastic wing-nut. A labeled rubber cover closes over the port between uses, which helps keep spray and grime out when the boat is underway or the cockpit is getting rinsed down.\u003c\/p\u003e\u003cp\u003eCable length depends on the configuration: USB and combo options use a 6 ft (1.83 m) harness for routing to equipment behind the dash, while the AUX-only lead is 20 in (0.51 m) for short runs to a nearby input.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePanel-mount access point for USB and or 3.5 mm AUX, depending on the connection type selected\u003c\/li\u003e\n\u003cli\u003eBackside wing-nut mounting on flat panels, with a rubber cover that seals over the opening between uses\u003c\/li\u003e\n\u003cli\u003eMounting hole size varies by configuration: 0.75 in (19 mm) on the single USB and AUX versions, and 1.125 in (29 mm) on the combo and dual USB versions\u003c\/li\u003e\n\u003cli\u003eUSB harness length is 6 ft (1.83 m) on USB, AUX and USB, and dual USB configurations for flexible routing behind consoles\u003c\/li\u003e\n\u003cli\u003eAUX-only version uses a 20 in (0.51 m) lead for compact installs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis item is offered in multiple connection configurations so the panel port matches the inputs you already have on board.\u003c\/p\u003e\u003cp\u003eThe USB versions extend a USB connection to an easy-to-reach location, while the AUX version brings a 3.5 mm stereo input to the panel and breaks out to left and right RCA behind the panel for tying into an auxiliary input. The combo and dual USB options add additional ports at the same mounting point. The single USB and AUX versions mount on panels up to 1 in (25.4 mm) thick, while the dual USB version supports panels up to 1.25 in (32 mm) thick.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-13563-00: Connection Type USB. A single USB pass-through at the panel for connecting a device where it is easy to reach.\u003c\/li\u003e\n\u003cli\u003e010-13564-00: Connection Type AUX. A 3.5 mm stereo input at the panel with stereo RCA breakout for connection behind the scenes.\u003c\/li\u003e\n\u003cli\u003e010-13421-00: Connection Type AUX \u0026amp; USB. Combines a 3.5 mm AUX jack and a USB port in one panel location so both analog and USB sources can share the same access point.\u003c\/li\u003e\n\u003cli\u003e010-13678-00: Connection Type Dual USB. Two USB ports at the panel for connecting multiple devices from the same mounting spot.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThese connectors extend existing inputs; they do not convert signals. Match the rear connections to your equipment inputs (USB to USB, and AUX to an analog auxiliary input using the RCA breakout).\u003c\/p\u003e\u003cp\u003eUSB playback and charging behavior depends on the head unit and the device being connected. For clean results on a boat, keep the cable run away from high-current wiring where possible and avoid tight bends right at the back of the port.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eChoose a flat mounting surface where the cap can close fully and the cable can be routed without chafe. Drill the correct hole for the selected configuration, insert the connector from the front, then tighten the plastic wing-nut from the backside. In exposed helm locations, leave a small drip loop behind the panel and secure the cable to reduce vibration wear.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis setup makes sense when the stereo is installed inside a console, under a seat, or behind a cabin panel and you still want day-to-day access to AUX or USB at the helm. It is a good match for boats that get rinsed down often and for installs where you want a port you can reach without opening a hatch.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"USB","offer_id":52262478217397,"sku":"QBP434863-V1","price":65.51,"currency_code":"USD","in_stock":false},{"title":"AUX","offer_id":52262478250165,"sku":"QBP434863-V2","price":54.59,"currency_code":"USD","in_stock":false},{"title":"AUX \u0026 USB","offer_id":52262478282933,"sku":"QBP434863-V3","price":0.0,"currency_code":"USD","in_stock":false},{"title":"Dual USB","offer_id":52262478315701,"sku":"QBP434863-V4","price":75.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294341_qbp434863.webp?v=1771364741"},{"product_id":"qbp435099","title":"JL Audio Core RCA Audio Interconnect, Twisted-Pair, OFC","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio Core RCA audio interconnect is a set of RCA signal cables offered in 2-channel or 4-channel versions, with lengths from 3 ft to 25 ft for routing low-level audio between a stereo source, DSP, and amplifiers on a boat.\u003c\/p\u003e\u003cp\u003eThey use OFC copper conductors with polyethylene dielectrics in a twisted-pair layout to help keep alternator whine and other interference out of the music when the cable run passes near power wiring. Molded connector bodies with machined brass connector elements and a small-diameter PVC jacket make it easier to snake through rigging tubes, consoles, and under-gunwale chases.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eChoice of 2-channel (one stereo pair) or 4-channel (two stereo pairs) to match the number of preamp outputs you need to carry.\u003c\/li\u003e\n\u003cli\u003eLength options from 3 ft up to 25 ft to suit short amp racks or long helm-to-bilge runs.\u003c\/li\u003e\n\u003cli\u003eTwisted-pair construction with OFC copper conductors and polyethylene dielectrics to help reduce noise pickup around charging systems and other onboard electronics.\u003c\/li\u003e\n\u003cli\u003eMolded RCA connector bodies with machined brass connector elements for a secure fit at the stereo, DSP, and amplifier.\u003c\/li\u003e\n\u003cli\u003eSmall-diameter PVC jacket that stays flexible for pulling through rigging tubes and tight chases.\u003c\/li\u003e\n\u003cli\u003eBuilt for clean, low-level signal transfer in multi-amp and multi-zone audio layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eLengths and channel counts vary across the range, so you can match the run on your boat and the number of RCA pairs you need to carry.\u003c\/p\u003e\u003cp\u003e2-channel versions are offered in 3 ft, 6 ft, 9 ft, 12 ft, 18 ft, and 25 ft lengths. 4-channel versions are offered in 12 ft and 18 ft lengths.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis interconnect uses standard RCA plugs for preamp-level audio. It is meant for line-level connections between a marine stereo, media receiver, DSP, or zone controller and amplifier RCA inputs, not for speaker outputs.\u003c\/p\u003e\u003cp\u003eChannel count is about how many signals are carried in the same jacket: 2-channel covers a single left and right pair, while 4-channel carries two left and right pairs for front and rear zones or multiple sources.\u003c\/p\u003e\u003ch6\u003eInstallation and routing on a boat\u003c\/h6\u003e\u003cp\u003ePlan the route before you pull cable. Keep RCA interconnects separated from high-current DC conductors for batteries, charging circuits, windlasses, and trim pumps, and cross power wiring at a right angle when paths have to meet. This helps limit noise and saves time later if you are chasing a hum.\u003c\/p\u003e\u003cp\u003eSupport the run so it does not vibrate or chafe, and leave a little service loop at the back of the head unit, processor, and amplifier so the connectors are not carrying the strain. If the path goes through bulkheads or metal hardware, use a grommet or conduit to protect the jacket.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eCommon installs include running audio from a helm stereo down to an amplifier rack in a console or bilge area, or tying a processor into a multi-amp setup for cockpit and tower zones. The longer lengths help when the amps live far from the dash and you want to avoid splicing signal wiring.\u003c\/p\u003e\u003cp\u003eThis is a good match for boaters upgrading to external amplifiers or adding more zones where keeping preamp runs tidy and noise resistant matters.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep RCA ends away from standing water and wipe salt spray off connectors during routine stereo checks. If you ever hear intermittent audio, reseating the plugs and checking for corrosion at the jacks is a quick first step before digging deeper into the system.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"6 ft \/ 2","offer_id":52262478479541,"sku":"QBP435099-V1","price":24.18,"currency_code":"USD","in_stock":true},{"title":"3 ft \/ 2","offer_id":52262478512309,"sku":"QBP435099-V2","price":0.0,"currency_code":"USD","in_stock":false},{"title":"9 ft \/ 2","offer_id":52262478545077,"sku":"QBP435099-V3","price":0.0,"currency_code":"USD","in_stock":false},{"title":"12 ft \/ 2","offer_id":52262478577845,"sku":"QBP435099-V4","price":28.21,"currency_code":"USD","in_stock":true},{"title":"18 ft \/ 2","offer_id":52262478610613,"sku":"QBP435099-V5","price":0.0,"currency_code":"USD","in_stock":false},{"title":"25 ft \/ 2","offer_id":52262478643381,"sku":"QBP435099-V6","price":0.0,"currency_code":"USD","in_stock":false},{"title":"12 ft \/ 4","offer_id":52262478676149,"sku":"QBP435099-V7","price":0.0,"currency_code":"USD","in_stock":false},{"title":"18 ft \/ 4","offer_id":52262478708917,"sku":"QBP435099-V8","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294346_qbp435099.webp?v=1771364744"},{"product_id":"qbp435757","title":"JL Audio XD-MAXI Blade Fuse, For MAXI Master Fuse Blocks","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio MAXI Fuse is a MAXI blade fuse used to protect high-current DC circuits in a boat's accessory and audio power distribution. It is available in amperage ratings from 30 A up to 100 A, so you can match the protection your fuse block and wiring call for.\u003c\/p\u003e\u003cp\u003eIt installs in MAXI-style fuse holders, including MAXI master fuse blocks and fused distribution blocks. The translucent body makes it easier to spot a blown element during troubleshooting without guessing.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMAXI blade fuse format for MAXI-style fuse holders and fused distribution blocks\u003c\/li\u003e\n\u003cli\u003eOffered in multiple amperage ratings from 30 A to 100 A (variant dependent)\u003c\/li\u003e\n\u003cli\u003eTranslucent housing helps with quick visual checks for a blown fuse\u003c\/li\u003e\n\u003cli\u003eCommon replacement fuse for JL Audio power connection and distribution hardware that uses MAXI fuses\u003c\/li\u003e\n\u003cli\u003eGood fit for higher-draw accessory and amplifier feeds where a standard small blade fuse is not used\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple amperage ratings. The rating is what changes between variants; the fuse style remains a MAXI blade format for the same holder style.\u003c\/p\u003e\u003cp\u003eAvailable amperage ratings: 30 A, 40 A, 50 A, 60 A, 80 A, and 100 A.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis fuse fits MAXI blade holders. It does not fit smaller ATO\/ATC or MINI blade holders, and it is a different form factor than MIDI or ANL style fuses.\u003c\/p\u003e\u003ch6\u003eInstallation and troubleshooting\u003c\/h6\u003e\u003cp\u003eReplace the fuse with the circuit de-energized, then pull the old fuse straight out and press the new fuse fully into the holder. If a replacement opens right away, treat it as an overcurrent symptom and check the load, wiring, and connections before installing another fuse.\u003c\/p\u003e\u003cp\u003eOn a boat, the fuse is only as reliable as the holder and connections around it. Keeping the fuse block covered and out of direct salt spray helps reduce corrosion and heat buildup at the terminals.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a practical spare to keep on board for boats running JL Audio power distribution, stereo amplifiers, or other MAXI-fused accessory feeds. It is also handy for service kits when you are troubleshooting an intermittent power loss at the fuse block.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"100A","offer_id":52262478774453,"sku":"QBP435757-V1","price":0.0,"currency_code":"USD","in_stock":false},{"title":"30A","offer_id":52262478807221,"sku":"QBP435757-V2","price":5.98,"currency_code":"USD","in_stock":false},{"title":"40A","offer_id":52262478839989,"sku":"QBP435757-V3","price":5.98,"currency_code":"USD","in_stock":false},{"title":"50A","offer_id":52262478872757,"sku":"QBP435757-V4","price":5.98,"currency_code":"USD","in_stock":false},{"title":"60A","offer_id":52262478905525,"sku":"QBP435757-V5","price":5.98,"currency_code":"USD","in_stock":false},{"title":"80A","offer_id":52262478938293,"sku":"QBP435757-V6","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1294358_qbp435757.webp?v=1771364745"},{"product_id":"qbp585508","title":"JL Audio Amplifier Connection Kit, Single Amplifier, MAXI Fuse Block, Power and Ground Wire, 18 ft 2-Channel Interconnect Cable, Speaker Wire, Remote Turn-On Lead","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio Amplifier Connection Kit is a complete wiring and fuse setup for powering and connecting a single amplifier on board. It is offered in configurations matched to amplifiers with up to a 30 A or 60 A MAXI fuse rating, and includes a 2-channel audio interconnect cable that measures 18 ft (5.5 m).\u003c\/p\u003e\u003cp\u003eThis kit is meant for clean, predictable installs where you want the amplifier feed properly fused and the signal and speaker wiring handled in the same package. On a boat, plan your wire routing before you crimp anything, support the run so it does not vibrate against hard edges, and keep terminations protected from spray and washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSingle-amplifier connection system with configurations for up to a 30 A or 60 A MAXI fuse rating\u003c\/li\u003e\n\u003cli\u003eMAXI master fuse block for placing overcurrent protection in the amplifier power feed\u003c\/li\u003e\n\u003cli\u003eIncludes a 2-channel audio interconnect cable, 18 ft (5.5 m), for reaching from source to amplifier\u003c\/li\u003e\n\u003cli\u003eIncludes power and ground cabling for the amplifier feed, plus speaker wire for amp-to-speaker runs\u003c\/li\u003e\n\u003cli\u003eRemote turn-on lead included for tying the amplifier to your stereo or switching signal\u003c\/li\u003e\n\u003cli\u003eSelf-tapping ground screw included for making a solid ground point where appropriate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations based on amperage rating.\u003c\/p\u003e\u003cp\u003eThe amperage rating indicates the MAXI fuse capacity used for the amplifier power feed so it aligns with the current demand of the amplifier you are installing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-13455-00: Amperage rating 60 A. This configuration matches single-amplifier installs that call for up to a 60 A fuse rating.\u003c\/li\u003e\n\u003cli\u003e010-13456-00: Amperage rating 30 A. This configuration matches single-amplifier installs that call for up to a 30 A fuse rating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMAXI master fuse block with matching MAXI fuse (rating depends on variant)\u003c\/li\u003e\n\u003cli\u003eRed power wire\u003c\/li\u003e\n\u003cli\u003eBlack ground wire\u003c\/li\u003e\n\u003cli\u003e2-channel audio interconnect cable, 18 ft (5.5 m)\u003c\/li\u003e\n\u003cli\u003eSpeaker wire\u003c\/li\u003e\n\u003cli\u003eRemote turn-on wire\u003c\/li\u003e\n\u003cli\u003eSelf-tapping ground screw\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eStart by confirming the amplifier fuse rating you are wiring for, then route the power lead from your battery switch or distribution point to the amplifier location with chafe protection anywhere it passes through bulkheads. Mount the fuse block where it is easy to inspect and service, and place it as close to the power source as practical for the run.\u003c\/p\u003e\u003cp\u003eGround quality matters in a boat that sees vibration. Use a clean, solid grounding point, keep the ground lead short where possible, and avoid stacking multiple high-current devices on a questionable ground. After you make terminations, secure the wiring so it cannot move and fatigue at the connector.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is intended for a single amplifier installation. Match the kit amperage rating to the amplifier fuse requirement and confirm your planned cable paths have enough length for your boat layout before finalizing terminations.\u003c\/p\u003e\u003cp\u003eA good match for boats adding one amplifier to run cockpit or cabin speakers, or for refits where you want the amplifier feed fused correctly and the signal and speaker wiring handled in one package.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"60","offer_id":52262557483189,"sku":"QBP585508-V1","price":129.0,"currency_code":"USD","in_stock":true},{"title":"30","offer_id":52262557515957,"sku":"QBP585508-V2","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1296407_qbp585508.webp?v=1771365365"},{"product_id":"qbp435175","title":"JL Audio Premium Power Connection Kit, 12V, OFC Copper","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis JL Audio amplifier power connection kit is offered in multiple configurations to match common one or two amplifier installs on board, with wire gauge options in 1\/0, 2, 4, and 8 AWG. It is meant for the DC power and ground side of an audio amplifier installation, where clean routing, solid terminations, and correct wire sizing make the difference between a system that plays reliably and one that trips, cuts out, or picks up noise.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm the combined amplifier current draw, your planned cable run length, and the size your amplifier power terminals will accept. Plan for overcurrent protection close to the battery, keep grounds short to a known-good bonding\/ground point, and route cables where they will not chafe in vibration or sit in bilge water.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConfigurations sized for single-amplifier and two-amplifier power wiring layouts.\u003c\/li\u003e\n\u003cli\u003eMultiple cable gauge options (1\/0, 2, 4, 8 AWG) to help manage voltage drop on longer runs and higher current systems.\u003c\/li\u003e\n\u003cli\u003eHelps standardize your install so the power feed, grounds, and branch runs are sized consistently instead of mixing mismatched wire.\u003c\/li\u003e\n\u003cli\u003eUseful for new amplifier additions in consoles, under seats, inside lockers, or in equipment bays where routing space and service access matter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is available in multiple configurations.\u003c\/p\u003e\u003cp\u003eThe main differences across the range are the power-cable gauge (AWG) and whether the configuration is intended for one amplifier or two amplifiers. Verify that your planned route has enough space for the selected gauge and that your amplifier terminals and lugs match the cable size.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-13640-00: AWG 1\/0, amplifier quantity 2. A heavier gauge like 1\/0 is typically used when total current draw is high or the run from the battery to the distribution point is longer.\u003c\/li\u003e\n\u003cli\u003e010-13641-00: AWG 2, amplifier quantity 2. 2 AWG is often used to keep voltage drop in check on dual-amplifier installs while staying easier to route than 1\/0.\u003c\/li\u003e\n\u003cli\u003e010-13452-00: AWG 4, amplifier quantity 2. 4 AWG can fit many moderate-current dual-amplifier systems, especially when routing space is limited.\u003c\/li\u003e\n\u003cli\u003e010-13454-00: AWG 8, amplifier quantity 1. 8 AWG is commonly used for smaller single-amplifier installs and is easier to pull through rigging tubes and bulkheads.\u003c\/li\u003e\n\u003cli\u003e010-13453-00: AWG 4, amplifier quantity 1. 4 AWG for a single amplifier is a practical choice when the run is longer or the amplifier draw is higher.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the power cable away from sharp edges and moving parts, and support it so it cannot whip or rub through insulation over time. Where the cable passes through fiberglass, aluminum, or bulkheads, use proper edge protection and grommets, then seal penetrations to limit water intrusion.\u003c\/p\u003e\u003cp\u003eUse the correct crimp tools and lugs for the selected gauge and your amplifier terminal style, and seal terminations to slow corrosion in salt air. A clean ground matters as much as the positive feed, so keep the ground path short, use a solid attachment point, and avoid stacking loose hardware that can work free with vibration.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eConfirm the cable gauge you choose will physically fit through your boat’s rigging routes and clamps, and that the amplifier power inputs accept that conductor size. If you are feeding two amplifiers, plan the layout so service access remains straightforward, with enough slack for future removal without stressing connections.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats adding an amplifier for a subwoofer, upgrading cockpit speakers with dedicated amplification, or running separate amplifiers for cabin and exterior zones. It also suits refits where you want to replace undersized or aging power wiring with a gauge that matches the system load and the actual cable run on the boat.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"1\/0 \/ 2","offer_id":52262603325621,"sku":"QBP435175-V1","price":498.83,"currency_code":"USD","in_stock":false},{"title":"4 \/ 2","offer_id":52262603358389,"sku":"QBP435175-V3","price":230.23,"currency_code":"USD","in_stock":false},{"title":"8 \/ 1","offer_id":52262603391157,"sku":"QBP435175-V4","price":107.42,"currency_code":"USD","in_stock":false},{"title":"4 \/ 1","offer_id":52262603423925,"sku":"QBP435175-V5","price":153.48,"currency_code":"USD","in_stock":false},{"title":"2 \/ 2","offer_id":52262603456693,"sku":"QBP435175-V2","price":345.34,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297731_qbp213371.png?v=1771367490"},{"product_id":"qbp424410","title":"JL Audio Mount Fixture for Enclosed Tower Speaker, For ETXv3 Enclosures, Marine-Grade Aluminum, Clear Anodized Finish, Sold in Pairs","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio Mount Fixture for Enclosed Tower Speaker is a range of mounting hardware for JL Audio ETXv2 and ETXv3 enclosed tower speaker enclosures. It covers common wake tower and hardtop installs with pipe-clamp sizes from 1.315\" up to 3\", plus surface and OEM-tower fixtures where a clamp mount is not the right fit.\u003c\/p\u003e\u003cp\u003eThis is the hardware piece that decides whether your speaker pods sit where you want them and stay there when the boat is bouncing. The main fit check is matching the mount style and the correct tube diameter or OEM tower location for your boat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for JL Audio ETXv2 and ETXv3 enclosed tower speaker enclosures, including M880-ETXv3, M770-ETXv3, and MX770-ETXv3 models\u003c\/li\u003e\n\u003cli\u003ePipe-mount options span 1.315\", 1.66\", 1.9\", 2\", 2.25\", 2.375\", 2.5\", 2.875\", and 3\" clamp inner diameters\u003c\/li\u003e\n\u003cli\u003eSwivel pipe-mount options allow up to 334 degrees of total aiming adjustment during installation\u003c\/li\u003e\n\u003cli\u003eSurface\/deck mounts and OEM tower fixtures support installs that do not use a standard round-tube clamp\u003c\/li\u003e\n\u003cli\u003eSold as a pair, which matches a typical two-speaker tower layout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product line varies by mounting style and, for pipe mounts, the clamp inner diameter. Fixed pipe clamps are available in 1.315\", 1.66\", 1.9\", 2\", 2.25\", 2.375\", 2.5\", 2.875\", and 3\" sizes. Swivel pipe mounts are available in 1.315\", 1.66\", 1.9\", 2\", 2.25\", 2.375\", and 2.5\".\u003c\/p\u003e\u003cp\u003eSurface-mount fixtures are available for flat mounting areas, including options that match certain OEM tower locations such as MasterCraft towers (2006-up), Nautique towers (2009-2016), and Four Winns towers. A low-profile MasterCraft surface option is also offered for tighter clearances at the factory tower position.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFor pipe mounts, measure the outside diameter of your tower tube and match it to the clamp inner diameter listed for the mount. The right size lets the clamp halves close evenly so the fasteners can be tightened without forcing the tube or leaving a gap.\u003c\/p\u003e\u003cp\u003eFor OEM tower fixtures, confirm the boat brand, model year range, and tower style match the named OEM fitment. If your tower has been swapped or modified, a pipe mount or surface mount may be a better match than an OEM-specific fixture.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePipe mounts are intended for horizontal tubing like a wake tower crossbar, hardtop rail, or similar structure. Set the pod position, snug fasteners evenly, then bring them to final torque after the speaker is aimed and the cable routing is sorted so the wire is supported and not rubbing on sharp edges.\u003c\/p\u003e\u003cp\u003eSwivel versions are meant to set the final aim during installation. They allow 334 degrees of total swivel and are typically installed with the enclosure directly above (12 o'clock) or directly below (6 o'clock) a horizontal pipe. Once the angle is set, keep it there rather than rotating it repeatedly.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of mount is a good match for wake boats and day boats running enclosed tower speakers where vibration and spray are part of normal use. Surface and OEM tower options also help when the tower tubing size or layout does not leave room for a standard clamp mount, but you still want a clean, secure speaker install.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Low-profile Surface \/ N\/A \/ OEM MasterCraft Tower (2006-up)","offer_id":52262902923445,"sku":"QBP424410-V2","price":209.51,"currency_code":"USD","in_stock":false},{"title":"Surface \/ N\/A \/ OEM MasterCraft Tower (2006-up)","offer_id":52262902956213,"sku":"QBP424410-V3","price":209.51,"currency_code":"USD","in_stock":false},{"title":"Surface \/ N\/A \/ OEM Nautique Tower (2009-16)","offer_id":52262902988981,"sku":"QBP424410-V4","price":209.51,"currency_code":"USD","in_stock":false},{"title":"Surface \/ N\/A \/ OEM Four Winns Tower","offer_id":52262903021749,"sku":"QBP424410-V5","price":169.6,"currency_code":"USD","in_stock":false},{"title":"Swivel Pipe \/ 2.5\" \/ N\/A","offer_id":52262903054517,"sku":"QBP424410-V6","price":400.32,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 1.315\" \/ N\/A","offer_id":52262903087285,"sku":"QBP424410-V7","price":210.15,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 1.66\" \/ N\/A","offer_id":52262903120053,"sku":"QBP424410-V8","price":210.15,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 1.9\" \/ N\/A","offer_id":52262903152821,"sku":"QBP424410-V9","price":210.15,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 2\" \/ N\/A","offer_id":52262903185589,"sku":"QBP424410-V10","price":210.15,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 2.25\" \/ N\/A","offer_id":52262903218357,"sku":"QBP424410-V11","price":190.13,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 2.375\" \/ N\/A","offer_id":52262903251125,"sku":"QBP424410-V12","price":210.15,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 2.5\" \/ N\/A","offer_id":52262903283893,"sku":"QBP424410-V13","price":210.15,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 2.875\" \/ N\/A","offer_id":52262903316661,"sku":"QBP424410-V14","price":240.18,"currency_code":"USD","in_stock":false},{"title":"Pipe \/ 3\" \/ N\/A","offer_id":52262903349429,"sku":"QBP424410-V15","price":240.18,"currency_code":"USD","in_stock":false},{"title":"Swivel Pipe \/ 1.315\" \/ N\/A","offer_id":52262903382197,"sku":"QBP424410-V16","price":350.27,"currency_code":"USD","in_stock":false},{"title":"Swivel Pipe \/ 1.66\" \/ N\/A","offer_id":52262903414965,"sku":"QBP424410-V17","price":350.27,"currency_code":"USD","in_stock":false},{"title":"Swivel Pipe \/ 1.9\" \/ N\/A","offer_id":52262903447733,"sku":"QBP424410-V18","price":350.27,"currency_code":"USD","in_stock":false},{"title":"Swivel Pipe \/ 2\" \/ N\/A","offer_id":52262903480501,"sku":"QBP424410-V19","price":350.27,"currency_code":"USD","in_stock":false},{"title":"Swivel Pipe \/ 2.25\" \/ N\/A","offer_id":52262903513269,"sku":"QBP424410-V20","price":300.23,"currency_code":"USD","in_stock":false},{"title":"Swivel Pipe \/ 2.375\" \/ N\/A","offer_id":52262903546037,"sku":"QBP424410-V21","price":350.27,"currency_code":"USD","in_stock":false},{"title":"Surface \/ N\/A \/ N\/A","offer_id":52262903578805,"sku":"QBP424410-V1","price":550.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297812_qbp424410.webp?v=1771372944"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/jl-audio.oembed?page=3","provider":"Quality Boat Parts","version":"1.0","type":"link"}