{"title":"Instrument Accessories","description":"","products":[{"product_id":"qbp296043","title":"Raymarine Wind Vane Replacement Kit, Vane, Bearing, Stud Kit","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine TA100 is a wind vane replacement kit with the vane, bearing, and stud parts needed to service the moving wind direction indicator on a compatible Raymarine wind transducer.\u003c\/p\u003e\u003cp\u003eThis kit is for the mechanical wear points at the top of a wind instrument setup, where sun, salt, vibration, and mast movement can eventually take a toll. Replacing the vane and its related bearing and stud hardware can help restore free movement when the original parts are damaged, worn, or missing.\u003c\/p\u003e\u003cp\u003eBecause this is a mechanical replacement kit, it does not change the boat’s 12V or 24V electrical system, display setup, or marine network. Fit is based on the existing Raymarine wind transducer assembly, so the TA100 part reference should be matched to the vessel’s current wind sensor before installation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement kit for the wind vane portion of a compatible Raymarine wind transducer.\u003c\/li\u003e\n\u003cli\u003eIncludes the vane, bearing, and stud parts listed for TA100 service replacement.\u003c\/li\u003e\n\u003cli\u003eHelps address common mechanical issues at the masthead, including a damaged vane or worn rotating hardware.\u003c\/li\u003e\n\u003cli\u003eNo wiring, voltage matching, or network configuration is involved because the kit services the mechanical wind vane components.\u003c\/li\u003e\n\u003cli\u003eUseful for sailboats where readable wind direction depends on the vane moving freely in changing breeze and apparent wind angles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe TA100 should be installed only where the existing Raymarine wind transducer is confirmed to use this replacement kit. On most boats, this work is done at the masthead or with the sensor removed, so access, dropped-part control, and safe rigging practice matter as much as the part itself.\u003c\/p\u003e\u003cp\u003eBefore fitting the new parts, check the surrounding sensor body for cracks, corrosion, loose hardware, or signs that the issue is beyond the vane, bearing, or stud. A clean mounting area and free rotation after assembly are important for dependable wind direction response.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis kit makes sense for owners maintaining a Raymarine wind instrument system rather than replacing the full transducer assembly. It is especially relevant for sailing boats, cruising boats, and race boats where masthead wind direction is used for trim, steering decisions, autopilot wind modes, or general situational awareness.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter installation, rinse the masthead area with fresh water when practical and inspect the vane during routine rig checks. Look for impact damage, stiffness, or looseness after heavy weather, transport, winter storage, or work aloft.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWind vane\u003c\/li\u003e\n\u003cli\u003eBearing\u003c\/li\u003e\n\u003cli\u003eStud kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52021130756277,"sku":"QBP296043","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330503_qbp296043.jpg?v=1780191624"},{"product_id":"qbp228898","title":"Apollo - 5 Conductor RGBW Cable - Male\/Female Connectors, 20 Inches","description":"\u003ch4\u003eIlluminate with Brilliance: Introducing the Ultimate RGBW Lighting Bundle\u003c\/h4\u003e \u003cp\u003eUnleash the vibrant world of color with the 5 Conductor RGBW Cable, a versatile solution designed to revolutionize your lighting experience. With its ingenious design and impeccable functionality, this cable will take your RGBW lighting setups to new heights.\u003c\/p\u003e \u003cp\u003eAt the heart of this incredible bundle is the 5 Conductor RGBW Cable, meticulously crafted to connect your RGBW lighting components effortlessly. Featuring both male and female connectors, this cable ensures seamless and secure connections between your devices. No more struggling with tangled wires or worrying about loose connections. With this cable, installation is a breeze, enabling you to focus on what truly matters – transforming your space into a mesmerizing visual wonderland.\u003c\/p\u003e \u003cp\u003eMeasuring an ideal length of 20 inches, the 5 Conductor RGBW Cable strikes the perfect balance between flexibility and manageability. It provides the freedom to position your lighting components precisely where you desire, while maintaining an organized and clutter-free setup. Whether you're illuminating a room, enhancing a display, or creating captivating stage lighting, this cable guarantees convenience and practicality in every application.\u003c\/p\u003e \u003cp\u003eWhat sets this cable apart is its exceptional support for RGBW lighting functionalities. Equipped with five conductors, it empowers you to effortlessly control color-changing effects and unleash the brilliance of white light. Immerse yourself in a breathtaking symphony of hues, effortlessly transitioning between shades and creating captivating lighting displays. With the 5 Conductor RGBW Cable, the boundaries of creativity are limitless.\u003c\/p\u003e \u003cp\u003eExperience unrivaled reliability and robust connectivity with the 5 Conductor RGBW Cable. Engineered with precision and utilizing high-quality materials, this cable ensures stable and uninterrupted communication between your RGBW lighting components. Say goodbye to flickering lights or unexpected disruptions during crucial moments. With this cable, you can rest assured that your lighting will shine brilliantly and consistently, every single time.\u003c\/p\u003e \u003ch4\u003eHighlights:\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eSeamless connections with male and female connectors\u003c\/li\u003e \u003cli\u003ePerfect length of 20 inches for various applications\u003c\/li\u003e \u003cli\u003eSupports RGBW lighting setups for color-changing and white light control\u003c\/li\u003e \u003cli\u003eHassle-free installation for effortless setup\u003c\/li\u003e \u003cli\u003eReliable connectivity for uninterrupted lighting performance\u003c\/li\u003e \u003c\/ul\u003e","brand":"Elstar","offers":[{"title":"Default Title","offer_id":52022910615733,"sku":"QBP228898","price":5.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1201845_qbp228898.jpg?v=1763248558"},{"product_id":"qbp006161","title":"Apollo - 2 Conductor single color cable with male\/female connectors, 20 inches","description":"\u003ch4\u003eEfficient Marine Lighting Connection with the 2 Conductor Single Color Cable\u003c\/h4\u003e \u003cp\u003eStreamline your marine lighting installation with the 2 Conductor Single Color Cable. This cable is designed to provide a reliable and efficient connection for your single color lighting setup on your boat or vessel. With its male\/female connectors and convenient 20-inch length, it simplifies the installation process and ensures seamless functionality for your marine lighting needs.\u003c\/p\u003e \u003ch4\u003eHighlights:\u003c\/h4\u003e \u003cp\u003e- High-quality 2 conductor cable for single color marine lighting applications\u003c\/p\u003e \u003cp\u003e- Male\/female connectors for easy and secure connections\u003c\/p\u003e \u003cp\u003e- 20-inch length for convenient installation\u003c\/p\u003e \u003cp\u003e- Durable construction for reliable and long-lasting performance\u003c\/p\u003e \u003cp\u003e- Ensures efficient power transmission for your marine lighting setup\u003c\/p\u003e","brand":"Apollo Lighting","offers":[{"title":"Default Title","offer_id":52022910648501,"sku":"QBP006161","price":9.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1201848_qbp006161.jpg?v=1763248559"},{"product_id":"qbp405560","title":"Poly-Planar - SBC Speaker Back Cover - White","description":"\u003ch4\u003eSpeaker Back Covers: Protect and Enhance Your Speakers\u003c\/h4\u003e \u003cp\u003eSpeaker Back Covers are essential accessories designed to provide optimal protection for the back side of your speakers, whether they are mounted behind a bulkhead or wall. These covers offer a sturdy shield for your speakers' wire connections and cones, ensuring their longevity and performance.\u003c\/p\u003e \u003cp\u003eThe 7-1\/8\" Speaker Back Cover boasts several distinguishing features that set it apart. Its slotted mounting holes perfectly align with stud locations found on most speakers, ensuring a secure and hassle-free installation process. Additionally, this cover effectively conceals wire connectors, safeguarding them from potential damage. Crafted from high-impact White ABS material, this speaker back cover guarantees durability and longevity, ensuring your speakers are well-protected.\u003c\/p\u003e \u003cp\u003eNext up, we have the 8-1\/2\" Speaker Back Cover, which shares the same purpose as its counterparts. This cover also features slotted mounting holes that align with most speaker stud locations, making installation a breeze. Its wire connector coverage provides added protection, while the high-impact White ABS construction ensures excellent durability and resistance to wear and tear.\u003c\/p\u003e \u003cp\u003eFor those in need of a larger size, the 11\" Speaker Back Cover delivers outstanding protection and performance. Like its counterparts, this cover offers slotted mounting holes for easy installation and covers wire connectors for enhanced safety. With its high-impact white ABS construction, this back cover is built to withstand the test of time, ensuring that your speakers remain secure and operational.\u003c\/p\u003e \u003ch4\u003e\u003cstrong\u003eKey Highlights:\u003c\/strong\u003e\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eProtects the back side of speakers behind a bulkhead or wall\u003c\/li\u003e \u003cli\u003eCovers wire connections and safeguards speaker cones\u003c\/li\u003e \u003cli\u003eSlotted mounting holes for easy installation\u003c\/li\u003e \u003cli\u003eHigh impact White ABS construction for durability\u003c\/li\u003e \u003cli\u003eAvailable in three sizes: 7-1\/8\", 8-1\/2\", and 11\"\u003c\/li\u003e \u003cli\u003eInpidual product sold separately\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eInvest in Speaker Back Covers to shield your speakers from potential damage, prolong their lifespan, and maintain optimal audio performance. With their easy installation and robust features, these covers offer an ideal solution for protecting your valuable speakers.\u003c\/p\u003e","brand":"Poly-Planar","offers":[{"title":"8-Inch","offer_id":52022948069557,"sku":"QBP405560-V7","price":0.0,"currency_code":"USD","in_stock":false},{"title":"2-Inch","offer_id":52022948102325,"sku":"QBP405560-V8","price":34.95,"currency_code":"USD","in_stock":false},{"title":"11-Inch","offer_id":52022948135093,"sku":"QBP405560-V6","price":74.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1203174_qbp405560.jpg?v=1763248909"},{"product_id":"qbp405573","title":"Poly-Planar - WC4-B Weather Resistant Radio Cover - UV Resistant","description":"\u003ch4\u003eWC4-B Weather Resistant Radio Cover - Black and White\u003c\/h4\u003e \u003cp\u003eThe WC4-B Weather Resistant Radio Cover is the ideal choice for anyone in need of basic water resistance for their audio equipment. Available in both black and white options, this cover provides reliable protection while maintaining functionality and style.\u003c\/p\u003e \u003cp\u003eThe key features of the WC4-B Weather Resistant Radio Cover include a convenient push button front cover, ensuring easy access to your audio equipment. The tinted cover adds a sleek and modern touch while providing visual clarity. Built to withstand harsh environments, this cover is corrosion-proof, guaranteeing long-lasting durability. The spring-loaded dampened door ensures smooth opening and closing motions, enhancing usability. Moreover, the cover is UV resistant, preventing discoloration and damage caused by sun exposure. To facilitate installation, a gasket and stainless steel mounting hardware are included.\u003c\/p\u003e \u003cp\u003eThe WC4-B Weather Resistant Radio Cover has the following specifications: dimensions of 9.8\" x 4.4\" x 3.9\" (249mm x 112mm x 100mm), a mounting depth of 2.94\" (75mm), and cut-out dimensions of 8.3\" x 3.4\" (210.45mm x 87.45mm). With a unit weight of 0.50 lbs, it is lightweight and easy to handle. Please note that each cover is sold inpidually.\u003c\/p\u003e \u003cp\u003eMain Highlights:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eBasic water resistance for audio equipment\u003c\/li\u003e \u003cli\u003ePush button front cover for easy access\u003c\/li\u003e \u003cli\u003eTinted cover for visual clarity\u003c\/li\u003e \u003cli\u003eCorrosion-proof for long-lasting durability\u003c\/li\u003e \u003cli\u003eSpring loaded dampened door for smooth opening and closing\u003c\/li\u003e \u003cli\u003eUV resistant to prevent discoloration\u003c\/li\u003e \u003cli\u003eGasket and stainless steel mounting hardware included\u003c\/li\u003e \u003cli\u003eDimensions: 9.8\" x 4.4\" x 3.9\" (249mm x 112mm x 100mm)\u003c\/li\u003e \u003cli\u003eMounting depth: 2.94\" (75mm)\u003c\/li\u003e \u003cli\u003eCut-out dimensions: 8.3\" x 3.4\" (210.45mm x 87.45mm)\u003c\/li\u003e \u003cli\u003eUnit weight: 0.50 lbs\u003c\/li\u003e \u003cli\u003eSold inpidually\u003c\/li\u003e \u003c\/ul\u003e","brand":"Poly-Planar","offers":[{"title":"Black","offer_id":52022948167861,"sku":"QBP405573-V0","price":0.0,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":52022948200629,"sku":"QBP405573-V1","price":37.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1203177_qbp405573.jpg?v=1763248910"},{"product_id":"qbp339974","title":"Fusion - Signature Series 3 Cover - Speakers\/Tweeters\/Subwoofer","description":"\u003ch4\u003eProtect and Personalize Your SG Series Subwoofer\u003c\/h4\u003e\u003cp\u003eThe \u003cstrong\u003eFusion SG-X10B 10\" Grill Cover\u003c\/strong\u003e is the perfect accessory to protect and customize your SG Series Subwoofer. Designed to fit the SG-S10W subwoofer, this black grill cover offers a sleek, classic look while providing durable protection against the harsh marine environment. Whether you're looking to maintain the pristine condition of your subwoofer or add a touch of style to your boat’s audio system, the SG-X10B grill cover delivers both form and function.\u003c\/p\u003e\u003ch4\u003eSuperior Protection with a Sleek Design\u003c\/h4\u003e\u003cp\u003eCrafted specifically for marine use, the Fusion SG-X10B grill cover is built to withstand the challenges of the open water. Its robust design shields your subwoofer from potential damage caused by exposure to the elements, ensuring long-lasting performance. The classic black finish adds a sophisticated touch to your audio setup, seamlessly blending with the aesthetics of your boat.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Protection:\u003c\/strong\u003e Shields your subwoofer from environmental hazards like salt, moisture, and UV exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClassic Aesthetic:\u003c\/strong\u003e The black finish offers a timeless look that complements any marine audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Fit:\u003c\/strong\u003e Designed specifically for the SG-S10W subwoofer for a perfect, secure fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eKey Features at a Glance\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10\" Classic Grill Cover:\u003c\/strong\u003e Provides essential protection and style for your SG-S10W subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Durability:\u003c\/strong\u003e Built to endure the marine environment, ensuring your subwoofer remains in top condition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSleek Black Finish:\u003c\/strong\u003e Enhances the appearance of your audio system with a polished, professional look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e Designed for a straightforward and secure fit on your SG Series subwoofer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade materials for durability and longevity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAvailable Variations\u003c\/h4\u003e\u003cp\u003eTo suit your specific needs and preferences, the Fusion grill covers are available in multiple sizes and finishes:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e\u003cstrong\u003eBlack \/ 6.5 Inch\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBlack \/ 7.7 Inch\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWhite \/ 10 Inch\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWhite \/ 6.5 Inch\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWhite \/ 10 Inch\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch4\u003eWhat’s Included in the Box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFusion SG-X10B 10\" Grill Cover (Black)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eEnhance and Protect Your Subwoofer\u003c\/h4\u003e\u003cp\u003eThe \u003cstrong\u003eFusion SG-X10B 10\" Grill Cover\u003c\/strong\u003e is more than just an accessory; it’s an essential component for maintaining and enhancing your marine audio system. Offering superior protection and a stylish appearance, this grill cover ensures that your subwoofer not only sounds great but also looks great, no matter where your boating adventures take you. Choose the size and color that best matches your setup and enjoy peace of mind knowing your equipment is well-protected.\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Black \/ 10 Inch","offer_id":52022959014069,"sku":"QBP339974-0","price":49.99,"currency_code":"USD","in_stock":false},{"title":"White \/ 10 Inch","offer_id":52022959046837,"sku":"QBP339974-9","price":39.99,"currency_code":"USD","in_stock":false},{"title":"Black \/ 6.5 Inch","offer_id":52022959079605,"sku":"QBP339974-5","price":49.99,"currency_code":"USD","in_stock":false},{"title":"White \/ 6.5 Inch","offer_id":52022959112373,"sku":"QBP339974-8","price":39.99,"currency_code":"USD","in_stock":false},{"title":"Black \/ 7.7 Inch","offer_id":52022959145141,"sku":"QBP339974-2","price":54.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1203593_qbp339974.jpg?v=1763249004"},{"product_id":"qbp377491","title":"JBL - Silicone Cover f\/R3500 Stereo Head Unit","description":"\u003cp\u003e\u003cstrong\u003eSilicone Cover for R3500 Stereo Head Unit \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eWater Proof Silicone Cover for JBL R3500 stereo head units.\u003c\/p\u003e \u003cp\u003e*Sold as an Individual\u003c\/p\u003e \u003c!--- cis2:mm5snJRn ---\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":52022990274741,"sku":"QBP377491","price":24.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1204300_qbp377491.jpg?v=1763249178"},{"product_id":"qbp335554","title":"Boss Audio - MRC5 Radio Cover","description":"\u003cp\u003eIntroducing the Boss Audio MRC5 Universal Radio Cover, designed to safeguard your in-dash receiver with utmost protection. This cover is compatible with any single-DIN (or 2-shaft) radio and is built to shield it from the harsh elements, including the sun, salt, and spray. Its hinged design allows for easy access to your radio whenever you need it.\u003c\/p\u003e \u003cp\u003eCrafted from UV-stabilized impact-resistant plastic, this radio cover ensures long-lasting durability. The cover is sealed with a heavy-duty gasket, providing a secure barrier against moisture and debris. The front panel is made of weatherproof polycarbonate, tinted to reduce glare and enhance visibility.\u003c\/p\u003e \u003cp\u003eWhen you purchase the Boss Audio MRC5 Universal Radio Cover, you'll receive everything you need for installation and operation. The package includes the radio cover itself, a foam gasket to ensure a snug fit, mounting hardware for easy setup, and an instruction manual to guide you through the process.\u003c\/p\u003e \u003cp\u003ePlease note that this product is sold inpidually, ensuring that you get exactly what you need for your specific setup. However, it's essential to be aware of the warning associated with this product. The Boss Audio MRC5 Universal Radio Cover may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Choose the Boss Audio MRC5 Universal Radio Cover and protect your valuable in-dash receiver with confidence and style. Available in two variations: Black\/White and Black\/Black.\u003c\/p\u003e","brand":"Boss Audio","offers":[{"title":"Black\/White","offer_id":52023008723125,"sku":"QBP335554-V5","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Black\/Black","offer_id":52023008755893,"sku":"QBP335554-V8","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1204983_qbp335554.jpg?v=1763249302"},{"product_id":"qbp974127","title":"Boss Audio - MRC10 Waterproof Flip-up Radio Cover","description":"\u003cp\u003eThe MRC10 Waterproof Flip-up Radio Cover by Boss Audio is a universal marine accessory designed to protect your radio from water and other elements. With its spring-activated impact-resistant ABS flip-up cover, it provides easy access to your radio while keeping it safe when not in use. The poly-carbonate tinted front panel adds a stylish touch and offers additional protection, while the EVA gasket ensures a watertight seal.\u003c\/p\u003e \u003cp\u003eThe package includes the radio cover itself, a foam gasket for added protection, mounting hardware for easy installation, and an instruction manual. Please note that this product is sold inpidually. It is important to be aware that this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more details, please refer to the provided warning or visit the specified website.\u003c\/p\u003e","brand":"Boss Audio","offers":[{"title":"Default Title","offer_id":52023010263221,"sku":"QBP974127","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1205044_qbp974127.jpg?v=1763249322"},{"product_id":"qbp372123","title":"JBL - REX30-6 30' Wired Remote Cable","description":"\u003cp\u003eThe REX30-6 30' Wired Remote Cable is a reliable extension cable designed for use with the MC-20, MC-30, REM-50, and REM-70 remote controllers. It features a 30-foot length and a 6-conductor plug, providing ample reach and connectivity options. Please note that this product is not eligible for return to the original point of purchase. For any issues or concerns, it is recommended to contact the manufacturer directly for assistance.\u003c\/p\u003e \u003cp\u003eImportant information: It is essential to be aware that this product contains chemicals that are known to the State of California to cause cancer, birth defects, or other reproductive harm. For detailed information about the specific chemicals and their potential risks, please visit P65Warnings.ca.gov.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":52023011016885,"sku":"QBP372123","price":59.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1205093_qbp372123.jpg?v=1763249339"},{"product_id":"qbp364194","title":"Quick - 6M Cable for TCD Controller","description":"\u003cp\u003eThe Thruster Cable - 6M, specifically the Quick TCDEX model, is an extension cable designed for use with the Quick BTQ bow thruster series. It serves as a connection link between the bow or stern thruster system and the TCD remote panel control system. With a length of 6 meters, this cable provides ample reach to ensure convenient and flexible installation of the thruster system and control panel.\u003c\/p\u003e \u003cp\u003eThe TCDEX cable is a crucial component in the operation of the bow or stern thruster system, enabling seamless communication between the thrusters and the TCD remote panel control. It ensures reliable and efficient control over the thruster functions, allowing for precise maneuvering and enhanced vessel maneuverability. Whether for docking, maneuvering in tight spaces, or maintaining stability in adverse conditions, the TCDEX cable plays a vital role in optimizing the performance of the Quick BTQ bow thruster series.\u003c\/p\u003e","brand":"Quick Marine","offers":[{"title":"Default Title","offer_id":52023023304885,"sku":"QBP364194","price":91.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1205586_qbp364194.jpg?v=1763249446"},{"product_id":"qbp453371","title":"Quick - 8M Cable f\/TCD Controller","description":"\u003cp\u003eThe 8M Cable for TCD Controller is a convenient extension cable designed for use with Thruster Control Panel by Quick. With a length of 8 meters, this cable allows for flexible installation and positioning of the control panel. It is specifically compatible with Quick's bow thruster and stern thruster control panels and switches, including TCD, TMS, and TSC models.\u003c\/p\u003e \u003cp\u003eWhether you need to extend the reach of your control panel for better accessibility or to accommodate the layout of your boat or vessel, the TCDEX08 cable extension provides a quick and practical solution. It ensures a reliable connection between the control panel and the thruster, allowing for seamless operation and control of your thruster system.\u003c\/p\u003e","brand":"Quick Marine","offers":[{"title":"Default Title","offer_id":52023023861941,"sku":"QBP453371","price":104.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1205603_qbp453371.jpg?v=1763249459"},{"product_id":"qbp412722","title":"Blue Sea Systems Terminal Feed Through Connector, 250A, 48V DC, IP66","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Terminal Feed Through Connector is a bulkhead pass-through terminal for routing high-current DC cables through hulls, decks, and bulkheads while reducing cable chafe and adding strain relief.\u003c\/p\u003e\u003cp\u003eThis connector is rated IP66, making it suitable for exterior or exposed marine locations where spray, washdowns, and heavy-sea conditions can reach the installation area. The mounting face can be gasketed or bedded to help create a water-tight installation when the cable path passes through a panel or structural surface.\u003c\/p\u003e\u003cp\u003eThe range includes red and black color options, with 5\/16\"-18 or 3\/8\"-16 stud configurations. That gives installers a clean way to bring large DC conductors through a deck, engine-room bulkhead, battery-compartment wall, or equipment panel without simply passing cable through a raw hole.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFeeds high-current cables through hulls, decks, and bulkheads while reducing chafe at the pass-through point.\u003c\/li\u003e\n\u003cli\u003eIP66 rating supports installations exposed to spray, washdowns, and heavy-sea conditions.\u003c\/li\u003e\n\u003cli\u003eMounting face can be gasketed or bedded for a water-tight installation through panels and bulkheads.\u003c\/li\u003e\n\u003cli\u003eAvailable in red and black to support clear DC cable identification on board.\u003c\/li\u003e\n\u003cli\u003eStud options include 5\/16\"-18 and 3\/8\"-16 for matching common high-current cable lugs.\u003c\/li\u003e\n\u003cli\u003eUseful for battery banks, inverter feeds, windlass wiring, DC distribution panels, and other large-cable runs where strain relief matters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations based on color and stud size. The color options help keep positive and negative cable paths visually organized, while the stud size should be matched to the cable lug and system layout.\u003c\/p\u003e\u003cp\u003eAcross the range, the purpose remains the same: a feed-through terminal for high-current cable runs through marine panels, decks, hulls, and bulkheads. The variant differences are limited to the visible color and stud thread configuration.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2201: Black, 5\/16\"-18 studs. The black version suits installations where the pass-through needs to match black DC cabling or negative-side identification.\u003c\/li\u003e\n\u003cli\u003e2202: Red, 5\/16\"-18 studs. The red version suits installations where the pass-through is used with positive-side DC cabling or needs a clear visual warning point.\u003c\/li\u003e\n\u003cli\u003e2203: Black, 3\/8\"-16 studs. This configuration uses the larger stud size while keeping the black color for negative-side or neutral visual organization.\u003c\/li\u003e\n\u003cli\u003e2204: Red, 3\/8\"-16 studs. This configuration combines the larger stud size with red color for positive-side DC cable identification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eMatch the stud size to the cable lug before installation, then confirm that the mounting surface has enough room for the terminal body, cable bend radius, and any gasket or bedding compound used at the face. Large DC cables should be routed so the connector carries strain relief at the pass-through, not the weight or movement of an unsupported cable run.\u003c\/p\u003e\u003cp\u003eTypical mounting locations include battery-compartment bulkheads, engine-room panels, deck penetrations for equipment feeds, and DC distribution areas where a large cable needs to pass cleanly from one side of a structure to the other.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis connector is a practical match for boats that use heavy DC loads such as windlasses, bow thrusters, inverters, chargers, and battery distribution equipment. It is especially useful where a cable penetration must stay tidy, protected from edge wear, and easier to inspect during routine electrical checks.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Black \/ 18","offer_id":52023025696949,"sku":"QBP412722-V2","price":35.99,"currency_code":"USD","in_stock":true},{"title":"Red \/ 18","offer_id":52023025729717,"sku":"QBP412722-V7","price":35.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 16","offer_id":52023025762485,"sku":"QBP412722-V4","price":39.99,"currency_code":"USD","in_stock":true},{"title":"Red \/ 16","offer_id":52023025795253,"sku":"QBP412722-V8","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333361_qbp412722.webp?v=1780191627"},{"product_id":"qbp414225","title":"Blue Sea Systems DualBus Common BusBar, 100A, 300V AC, 48V DC, #8-32 Screw Terminals, Tin-Plated Copper","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems DualBus 100A BusBar is a compact common bus bar range that places positive and negative distribution on one block for cleaner wiring in a boat electrical system. It is rated for 100A continuous service, with maximum voltage ratings of 300V AC and 48V DC, so it fits common 12V and 24V DC installations while leaving room for systems up to 48V DC.\u003c\/p\u003e\u003cp\u003eEach version uses #8-32 screw terminals and a tin-plated copper CDA 110 \/ UNS 11000 bus, with a UL 94-V0 rated glass-reinforced thermoplastic base. The layout is useful behind helm panels, inside consoles, in cabin electrical lockers, or near grouped equipment where both feed and return connections need to stay organized and easy to inspect.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDualBus layout combines positive and negative buses on one block to reduce wiring clutter in confined marine electrical spaces.\u003c\/li\u003e\n\u003cli\u003e100A continuous rating supports small to mid-size branch circuit distribution points when installed with proper upstream circuit protection.\u003c\/li\u003e\n\u003cli\u003eRated for up to 300V AC and 48V DC, covering common 12V and 24V boat systems.\u003c\/li\u003e\n\u003cli\u003e#8-32 screw terminals provide secure ring-terminal connections, with a specified screw terminal torque of 15 in-lb.\u003c\/li\u003e\n\u003cli\u003eTin-plated copper CDA 110 \/ UNS 11000 bus material supports good conductivity in marine electrical installations.\u003c\/li\u003e\n\u003cli\u003eUL 94-V0 rated glass-reinforced thermoplastic base helps keep the block stable in protected electrical compartments.\u003c\/li\u003e\n\u003cli\u003eCE and UKCA marked for regulated installations where recognized product compliance matters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis DualBus range is offered in two circuit counts, allowing the same basic bus bar format to match different amounts of wiring at the helm, panel, or equipment location.\u003c\/p\u003e\u003cp\u003eBoth variants share the 100A continuous rating, 300V AC and 48V DC maximum voltage ratings, #8-32 screw terminal type, tin-plated copper bus material, UL 94-V0 glass-reinforced thermoplastic base, 15 in-lb terminal torque, and 5\/8 in height.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2701: 5 circuit configuration with 5 screw terminals per bus. Its 1.830 in by 3.012 in footprint works well where only a small group of positive and negative connections needs a tidy landing point.\u003c\/li\u003e\n\u003cli\u003e2702: 10 circuit configuration with 10 screw terminals per bus. Its 1.830 in by 5.060 in footprint gives more termination points for grouped electronics, accessories, or panel wiring in the same area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe mounting holes accept #10 screws, giving the installer a straightforward way to fasten the block to a panel board, backplate, or other protected mounting surface. Keep cable runs supported so vibration is not carried by the terminal screws, and use ring terminals sized for the conductor and the #8-32 screw connection.\u003c\/p\u003e\u003cp\u003eBecause the bus and terminals are accessible, the block should be installed where accidental contact, spray, and loose gear are controlled. In layouts where the terminals may be exposed during normal use or service, a suitable insulating cover should be considered as part of the installation.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis bus bar is meant for organized distribution, not for circuit protection by itself. Feed circuits should be protected by correctly sized fuses or breakers upstream, and conductor sizing should match the load, run length, temperature conditions, and the vessel's electrical standards.\u003c\/p\u003e\u003cp\u003eFor boat owners refitting a helm panel, adding electronics, or cleaning up scattered accessory wiring, the DualBus format keeps the positive and negative sides close together without mixing them. That makes later troubleshooting easier because both sides of each circuit can be traced in the same area.\u003c\/p\u003e\u003ch6\u003eMaterials and maintenance\u003c\/h6\u003e\u003cp\u003eThe tin-plated copper bus material helps maintain conductivity in the marine environment when the installation is kept dry and protected. During seasonal service, check that terminal screws remain properly tightened, look for corrosion or heat discoloration, and confirm that conductors are strain relieved and not pulling against the screw terminals.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"5 Circuit","offer_id":52023026614453,"sku":"QBP414225-V5","price":29.99,"currency_code":"USD","in_stock":true},{"title":"10 Circuit","offer_id":52023026647221,"sku":"QBP414225-V4","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333365_qbp414225.jpg?v=1780191628"},{"product_id":"qbp415566","title":"Blue Sea Systems DualBus Plus 150A BusBar, 5 Gang, #10-32 Screw Terminals","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems DualBus Plus is a dual busbar that combines positive and negative distribution on one block, giving small marine electrical upgrades a cleaner termination point without adding separate busbars. It is rated for 150A DC and 130A AC, with maximum voltage ratings of 48V DC and 300V AC.\u003c\/p\u003e\u003cp\u003eEach bus has five #10-32 screw terminals and two terminal studs, so it works well as a central connection point for electronics, lighting, pumps, stereo equipment, and other branch circuits where positive and negative wiring need to stay organized. A clear polycarbonate snap-on cover helps protect the terminals and meets USCG and ABYC insulation requirements.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCombines positive and negative buses on one block to reduce wiring clutter in compact marine electrical panels.\u003c\/li\u003e\n\u003cli\u003eFive #10-32 screw terminals per bus give multiple branch circuits a tidy termination point.\u003c\/li\u003e\n\u003cli\u003eTwo terminal studs per bus support larger feed or return connections, with stud size depending on the selected variant.\u003c\/li\u003e\n\u003cli\u003e150A DC continuous rating supports common accessory distribution layouts on 12V and 24V boats, within the 48V DC maximum rating.\u003c\/li\u003e\n\u003cli\u003eTin-plated copper bus material helps maintain good conductivity in damp marine environments.\u003c\/li\u003e\n\u003cli\u003eUL 94-V0 rated glass-reinforced thermoplastic base adds insulation and structure for onboard electrical installations.\u003c\/li\u003e\n\u003cli\u003eClear polycarbonate cover snaps over the block and meets USCG and ABYC insulation requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two stud configurations for matching the main cable lugs and hardware used in the boat’s electrical system.\u003c\/p\u003e\u003cp\u003eThe screw-terminal layout, bus function, 150A DC rating, 48V DC maximum rating, clear cover, and five-terminal-per-bus arrangement remain the same across these configurations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2723: 5\/16 in-18 stud version. This configuration suits installations where the main positive and negative cable lugs are sized for 5\/16 in studs.\u003c\/li\u003e\n\u003cli\u003e2722: 1\/4 in-20 stud version. This configuration suits installations where the main positive and negative cable lugs are sized for 1\/4 in studs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the block in a dry, accessible electrical area such as behind a distribution panel, inside a console, or near a battery switch and accessory fuse block. The base uses #10 or M5 mounting screws, and the cover should remain accessible so connections can be inspected without disturbing the wiring layout.\u003c\/p\u003e\u003cp\u003eUse properly crimped marine terminals, match lug size to the selected stud version, and torque the screw terminals and studs to the specified values for the variant being installed. This helps avoid loose connections caused by vibration and repeated heating and cooling cycles on board.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe DualBus Plus is a good match for boats that need a compact positive and negative distribution point for electronics and accessory wiring. It is useful during refits or add-ons where new equipment such as chartplotters, radios, pumps, lighting circuits, or USB chargers needs a cleaner connection point than stacking conductors on one battery or switch terminal.\u003c\/p\u003e\u003cp\u003eBecause the main difference between the variants is stud size, the key fit check is the terminal lug hardware already planned for the main feed and return cables. The 2723 uses 5\/16 in-18 studs, while the 2722 uses 1\/4 in-20 studs.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"20 Stud","offer_id":52023026679989,"sku":"QBP415566-V6","price":42.99,"currency_code":"USD","in_stock":true},{"title":"18 Stud","offer_id":52023026712757,"sku":"QBP415566-V0","price":48.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333369_qbp415566.jpg?v=1780191629"},{"product_id":"qbp416140","title":"Blue Sea Systems CableCap Stud Insulator, PVC, Single Stud","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems CableCap is a PVC stud insulator for covering a single exposed termination stud on boat electrical equipment. It is made for stud-type connectors on alternators, starters, windlasses, and other high-amperage termination points where an uncovered live post can be a problem in tight electrical spaces.\u003c\/p\u003e\u003cp\u003eThis CableCap range covers multiple stud and cable sizes, with red and black versions available for installations that use color separation around DC positive and negative circuits. Across the family, the listed cable sizes run from 18 AWG through 4\/0 AWG, so the correct variant should be matched to the terminal, cable size, and stud diameter being protected.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eInsulates a single stud-type connector on alternators, starters, windlasses, and other high-amperage devices.\u003c\/li\u003e\n\u003cli\u003ePVC construction gives the cap a practical insulating body for marine DC electrical installations.\u003c\/li\u003e\n\u003cli\u003eRed and black color options support clear visual separation in electrical lockers, battery compartments, and engine spaces.\u003c\/li\u003e\n\u003cli\u003eVariant range covers cable sizes from 18 AWG to 4\/0 AWG, depending on the selected cap.\u003c\/li\u003e\n\u003cli\u003eStud size options include 0.47 to 0.13, 0.70 to 0.30, 0.50, and 1.25 to 0.70, allowing the cap to be matched to the termination point rather than forced onto the wrong hardware.\u003c\/li\u003e\n\u003cli\u003eUseful for reducing accidental contact with exposed high-current studs in crowded marine electrical areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe CableCap range varies by color and by the stud size range it is meant to cover. Red and black versions are available across the common size groups, which helps keep the installation easy to identify after panels, covers, or battery cables are reinstalled.\u003c\/p\u003e\u003cp\u003eThe variants also differ by cable size coverage, with smaller caps for 18 to 10 AWG and 8 to 4 AWG wiring, mid-size caps for 2 to 2\/0 AWG wiring, and larger caps for 3\/0 to 4\/0 AWG wiring. Match the cap to the actual stud and cable size on the alternator, starter, windlass, bus connection, or other high-current termination before installation.\u003c\/p\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eCheck the terminal stack before fitting the cap, especially where a lug, washer, nut, and additional hardware share the same stud. The cap should cover the exposed conductor area without putting strain on the cable or interfering with the tightened connection.\u003c\/p\u003e\u003cp\u003eOn boats, these caps are most often used in spaces where tools, loose gear, battery boxes, or nearby metalwork could contact a live stud. They are a simple fit-and-protect item for DC refits, battery cable upgrades, windlass wiring, engine-room service work, and cleanup of exposed high-current posts.\u003c\/p\u003e\u003ch6\u003eCompatibility and use on board\u003c\/h6\u003e\u003cp\u003eThis product is a good match for boat owners, installers, and service technicians working around high-current DC terminations that need a cleaner and safer insulated finish. It is not a network connector or a voltage-specific electronic component, so fit is determined by the physical stud, terminal, and cable size rather than by NMEA compatibility or 12V versus 24V system voltage.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Black \/ 0.47 to 0.13","offer_id":52023026876597,"sku":"QBP416140-V2","price":5.99,"currency_code":"USD","in_stock":true},{"title":"Red \/ 0.47 to 0.13","offer_id":52023026909365,"sku":"QBP416140-V8","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 0.70 to 0.30","offer_id":52023026942133,"sku":"QBP416140-V6","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Red \/ 0.70 to 0.30","offer_id":52023026974901,"sku":"QBP416140-V0","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 0.50","offer_id":52023027007669,"sku":"QBP416140-V3","price":7.99,"currency_code":"USD","in_stock":true},{"title":"Red \/ 0.50","offer_id":52023027040437,"sku":"QBP416140-V9","price":7.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 1.25 to 0.70","offer_id":52023027073205,"sku":"QBP416140-V4","price":8.99,"currency_code":"USD","in_stock":true},{"title":"Red \/ 1.25 to 0.70","offer_id":52023027105973,"sku":"QBP416140-V5","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333371_qbp416140.jpg?v=1780191629"},{"product_id":"qbp351250","title":"RIGID Industries - SR-M Series Lens Cover - Polycarbonate Plastic","description":"\u003cp\u003eIntroducing RIGID light covers, the ultimate combination of style and functionality for your vehicle. Designed to enhance the appearance of your lights while safeguarding your investment, these covers are a must-have accessory. Crafted from durable polycarbonate plastic, they provide an additional layer of protection for the lens of your LED lights, ensuring their longevity and performance.\u003c\/p\u003e \u003cp\u003eThe snap-on and off feature of these light covers makes installation and removal a breeze. With just a simple action, you can easily swap them out whenever you desire. This convenient design allows for effortless customization, enabling you to switch between different looks effortlessly.\u003c\/p\u003e \u003cp\u003eIn addition to their aesthetic appeal, these light covers serve a practical purpose. If you reside in a state that requires covers on accessory lights, these RIGID light covers have got you covered. They comply with regulations, ensuring that you stay on the right side of the law while adding a touch of personal style to your vehicle.\u003c\/p\u003e \u003cp\u003eAvailable in two captivating variations, you can choose the perfect match for your vehicle's aesthetic. The sleek and versatile black option seamlessly blends with any color scheme, providing a subtle yet stylish enhancement. Alternatively, the vibrant yellow variant adds a bold and eye-catching element to your vehicle, making it stand out from the crowd.\u003c\/p\u003e \u003cp\u003eUpgrade your vehicle's lighting with RIGID light covers. Made from high-quality polycarbonate plastic, these covers offer superior protection, effortless installation, and compliance with regulations. Experience the perfect blend of style and functionality for your LED lights with RIGID light covers.\u003c\/p\u003e","brand":"RIGID Industries","offers":[{"title":"Black","offer_id":52023036084405,"sku":"QBP351250-V7","price":11.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1206112_qbp351250.jpg?v=1763249587"},{"product_id":"qbp351608","title":"RIGID Industries - SR-Series Lens Cover - 6\", Polycarbonate Plastic","description":"\u003cp\u003eIntroducing RIGID light covers, the ultimate solution for both style and functionality. Transform the appearance of your vehicle while safeguarding your valuable investment. Crafted from durable polycarbonate plastic, these light covers provide an additional layer of protection for your LED light's lens. With their snap-on and off design, replacing them is effortless and hassle-free. Moreover, they are ideal for states that mandate covers on accessory lights.\u003c\/p\u003e \u003cp\u003eChoose from an array of variations to suit your preferences. The sleek Black cover adds a touch of elegance to your vehicle, exuding sophistication wherever you go. The vibrant Yellow cover injects a burst of energy and excitement, making a bold statement on the road. Opt for the Clear cover for a seamless and transparent look, allowing your LED light to shine through without any obstruction. For those seeking a touch of mystery and allure, the Smoke cover provides a smoky, tinted appearance, creating an intriguing ambiance.\u003c\/p\u003e \u003cp\u003eIndulge in the convenience and protection offered by RIGID light covers. Embrace their easy snap-on and off feature, enabling swift installation and removal whenever needed. The polycarbonate plastic construction ensures durability and long-lasting performance. With RIGID light covers, you not only enhance the visual appeal of your vehicle but also safeguard your LED light from potential damage. Upgrade your ride today and experience the perfect fusion of style and functionality.\u003c\/p\u003e","brand":"RIGID Industries","offers":[{"title":"Black","offer_id":52023036248245,"sku":"QBP351608-V7","price":14.99,"currency_code":"USD","in_stock":false},{"title":"Smoke","offer_id":52023036281013,"sku":"QBP351608-V6","price":18.99,"currency_code":"USD","in_stock":false},{"title":"Clear","offer_id":52023036313781,"sku":"QBP351608-V2","price":18.99,"currency_code":"USD","in_stock":false},{"title":"Amber","offer_id":52023036346549,"sku":"QBP351608-V1","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1206122_qbp351608.jpg?v=1763249589"},{"product_id":"qbp352130","title":"RIGID Industries - Adapt XE Light Cover - Polycarbonate Plastic","description":"\u003cp\u003eIntroducing the Adapt XE Light Cover, a must-have accessory for your bike. Designed by RIGID, these light covers not only enhance the style of your bike but also provide valuable protection. Made from durable polycarbonate plastic, these covers are built to withstand the elements and keep your lights safe and secure.\u003c\/p\u003e \u003cp\u003eInstalling the Adapt XE Light Cover is a breeze. With its easy-to-use snap-on feature, you can quickly attach or detach the cover whenever needed. This makes maintenance and cleaning a hassle-free task. No more struggling with complicated installations or wasting time on tedious processes.\u003c\/p\u003e \u003cp\u003eThe Adapt XE Light Cover is specifically designed for areas that require covers on accessory lighting. It not only adds an extra layer of protection but also enhances the appearance of your RIGID Adapt XE LED light. With its sleek design and reliable construction, this light cover seamlessly integrates with your bike, giving it a unique and eye-catching look.\u003c\/p\u003e \u003cp\u003eChoose from two different variations of the Adapt XE Light Cover. If you prefer a vibrant and bold look, the yellow cover is the perfect choice for you. It adds a touch of personality to your bike while keeping it protected. For a more transparent and subtle appearance, the clear cover is an excellent option. It allows the full brilliance of your RIGID Adapt XE LED light to shine through while still providing the necessary safeguard.\u003c\/p\u003e \u003cp\u003eInvest in the Adapt XE Light Cover today and give your bike the style and protection it deserves. Experience the convenience of a snap-on design and the durability of polycarbonate plastic. Upgrade your bike's lighting game and stand out from the crowd with RIGID's Adapt XE Light Cover.\u003c\/p\u003e","brand":"RIGID Industries","offers":[{"title":"Yellow","offer_id":52023037034677,"sku":"QBP352130-V0","price":19.99,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":52023037067445,"sku":"QBP352130-V2","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1206145_qbp352130.jpg?v=1763249593"},{"product_id":"qbp352238","title":"RIGID Industries - Adapt Moto Kit XE Number Plate - Durable Polypropylene","description":"\u003cp\u003eIntroducing the RIGID Adapt XE Number Plate, a must-have accessory for the Adapt XE Extreme Enduro LED Moto Kit. Crafted from durable polypropylene, this universal fit number plate offers convenience and style. With its easy snap-on and snap-off design, you can effortlessly install and remove the plate whenever needed. Enhance your dirt bike's appearance with the included custom graphics template, allowing you to personalize it to your liking. Get ready to dominate the night with the Adapt XE LED dirt bike light and its range of accessory parts.\u003c\/p\u003e \u003cp\u003eIn terms of construction, the Adapt XE Number Plate is constructed using high-quality polypropylene, ensuring its longevity and resistance to wear and tear. With its sleek black color, it adds a touch of sophistication to your motorcycle's overall aesthetics. Installing and removing the number plate is a breeze, thanks to the innovative snap-on and snap-off mechanism. No more hassle or time wasted – simply attach or detach the plate effortlessly.\u003c\/p\u003e \u003cp\u003eTo add a touch of uniqueness to your ride, the Adapt XE Number Plate includes a custom graphics template. This allows you to create your own personalized design, making your dirt bike stand out from the crowd. Express your style and creativity with ease using the provided template.\u003c\/p\u003e \u003cp\u003eIn addition to the black variation, we also offer a white color option for those seeking a different look. Whether you prefer the sleekness of black or the vibrancy of white, you can choose the color that best suits your preferences.\u003c\/p\u003e \u003cp\u003eUpgrade your Adapt XE Extreme Enduro LED Moto Kit with the versatile Adapt XE Number Plate. Enjoy the convenience of easy installation, the durability of polypropylene, and the ability to personalize your dirt bike's appearance. Own the night with RIGID's range of accessory parts for the Adapt XE LED dirt bike light.\u003c\/p\u003e","brand":"RIGID Industries","offers":[{"title":"White","offer_id":52023037100213,"sku":"QBP352238-V6","price":32.99,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":52023037132981,"sku":"QBP352238-V1","price":32.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1206147_qbp352238.jpg?v=1763249593"},{"product_id":"qbp410834","title":"Blue Sea Systems PowerBar 1000 Busbar, 1000A, 150V, Tin-Plated Copper, Snap-On Insulating Cover","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems PowerBar 1000 is a high-capacity busbar for bringing large and small conductors together in a single, organized connection point on a boat. It carries a 1,000A continuous rating and supports systems up to 150V, making it a strong match for larger DC distribution layouts, inverter feeds, battery banks, fuse block connections, and other high-current marine circuits.\u003c\/p\u003e\u003cp\u003eThe bus is made from tin-plated C11000 copper, with a stepped layout that places conductors on two elevations to help keep heavy cable runs and smaller branch connections easier to route. Each configuration includes terminal studs for main conductors, #10-32 and #8-32 terminal screws for smaller gauge wires, and a snap-on insulating cover with a label recess.\u003c\/p\u003e\u003cp\u003eThe base is made from UL 94-V0 rated glass-reinforced thermoplastic, and the cover helps the finished installation meet ABYC and USCG requirements for insulated high-current connections. The bar can also be shortened where space is tight, which is useful in battery compartments, electrical panels, and machinery spaces where cable bend radius and service access both matter.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1,000A continuous rating for large marine DC distribution systems.\u003c\/li\u003e\n\u003cli\u003e150V maximum voltage rating for compatibility with common low-voltage marine electrical architectures.\u003c\/li\u003e\n\u003cli\u003eTin-plated C11000 copper bus material for conductivity and resistance to corrosion in marine electrical spaces.\u003c\/li\u003e\n\u003cli\u003eStepped bus layout gives conductors two working elevations, helping reduce crowding when several large cables land in the same area.\u003c\/li\u003e\n\u003cli\u003eAccepts both terminal studs and terminal screws, so large conductors and smaller accessory or fuse block connections can share the same distribution point.\u003c\/li\u003e\n\u003cli\u003eOne-piece serrated flange nuts help maintain secure stud connections after proper torque is applied.\u003c\/li\u003e\n\u003cli\u003eStainless steel 8-32 screws with captive lock washers support smaller gauge wire terminations.\u003c\/li\u003e\n\u003cli\u003eMounting holes accept #10 or M5 screws for installation on panels, boards, or other suitable mounting surfaces.\u003c\/li\u003e\n\u003cli\u003eSnap-on insulating cover includes a label recess and supports ABYC and USCG compliant installation practices.\u003c\/li\u003e\n\u003cli\u003eBi-directional end caps allow additional busbars to be ganged when the electrical system needs more distribution capacity.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe PowerBar 1000 is offered in four configurations. The options change by terminal stud size and the number of terminal studs, while the core 1,000A busbar layout, 150V maximum voltage rating, tin-plated copper bus material, and insulated cover remain consistent across the range.\u003c\/p\u003e\u003cp\u003eThe 3\/8-inch stud versions use 3\/8-inch-16 terminal studs with a 140 in-lb terminal stud torque. The 5\/16-inch stud versions use 5\/16-inch-18 terminal studs with a 120 in-lb terminal stud torque.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1990 has 3\/8-inch terminal studs and 8 studs. This layout suits installations with fewer main cable landings while keeping the larger 3\/8-inch stud size for heavy conductors.\u003c\/li\u003e\n\u003cli\u003e1992 has 5\/16-inch terminal studs and 8 studs. This version keeps the shorter 8-stud format while matching systems already built around 5\/16-inch ring terminals.\u003c\/li\u003e\n\u003cli\u003e1991 has 3\/8-inch terminal studs and 12 studs. The added stud count gives more main connection points for larger DC distribution layouts that use 3\/8-inch lugs.\u003c\/li\u003e\n\u003cli\u003e1993 has 5\/16-inch terminal studs and 12 studs. This configuration gives the higher stud count while keeping 5\/16-inch terminal compatibility for matching cable hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the PowerBar 1000 on a dry, serviceable electrical surface where the cover can be removed for inspection and where connected cables are properly supported. The bar accepts #10 or M5 mounting screws, and the installation should leave enough room for ring terminals, bend radius, labels, and tool access for torque checks.\u003c\/p\u003e\u003cp\u003eThe busbar may be cut to a shorter length when the available mounting space is limited. After any modification, the finished installation still needs clean conductor routing, protected positive conductors where applicable, and a cover fitted over exposed high-current terminals.\u003c\/p\u003e\u003ch6\u003eElectrical integration\u003c\/h6\u003e\u003cp\u003eThis busbar is useful where several high-current circuits need a common distribution point, such as battery banks, inverter circuits, charging systems, DC panels, or fuse block groups. The matching elevations between the busbar and common fuse blocks can reduce the need for extra connecting cables, which helps keep the installation cleaner and easier to inspect.\u003c\/p\u003e\u003cp\u003eRing terminal size should match the selected stud version, and all connections should be tightened to the correct torque for that stud size. The smaller screw terminals are intended for smaller conductor connections and use the listed #10-32 and #8-32 screw hardware rather than the main terminal studs.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"3\/8-Inch \/ 8","offer_id":52023041589429,"sku":"QBP410834-V9","price":265.99,"currency_code":"USD","in_stock":true},{"title":"5\/16-Inch \/ 8","offer_id":52023041622197,"sku":"QBP410834-V2","price":265.99,"currency_code":"USD","in_stock":true},{"title":"3\/8-Inch \/ 12","offer_id":52023041654965,"sku":"QBP410834-V6","price":331.99,"currency_code":"USD","in_stock":true},{"title":"5\/16-Inch \/ 12","offer_id":52023041687733,"sku":"QBP410834-V4","price":331.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333339_qbp410834.webp?v=1780191636"},{"product_id":"qbp412057","title":"Blue Sea Systems PowerBar 600A BusBar, 300V AC, 48V DC, 3\/8-16 Stud","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems PowerBar 600A BusBar is a high-current bus bar for organizing heavy DC and AC cable connections in marine electrical systems.\u003c\/p\u003e\u003cp\u003eIt is rated for 600A DC and 545A AC continuous service, with a maximum voltage rating of 48V DC or 300V AC. The 3\/8\"-16 stud terminals suit large cable lugs used in battery banks, inverter feeds, windlass circuits, thrusters, charging systems, and main distribution points where clean cable routing matters.\u003c\/p\u003e\u003cp\u003eThe bus is tin-plated copper CDA 110\/UNS11000 on a UL 94-V0 rated glass-reinforced thermoplastic base, giving installers a compact way to build a central positive, negative, or ground bussing point while keeping high-amperage terminations accessible for inspection and service.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e600A DC and 545A AC continuous rating for high-current marine distribution work.\u003c\/li\u003e\n\u003cli\u003eMaximum voltage rating of 48V DC or 300V AC for use in common marine DC systems and applicable AC distribution layouts.\u003c\/li\u003e\n\u003cli\u003e3\/8\"-16 stud terminals accept large cable lugs used on battery cables and other heavy conductors.\u003c\/li\u003e\n\u003cli\u003eTin-plated copper bus helps maintain conductivity in demanding onboard electrical environments.\u003c\/li\u003e\n\u003cli\u003eUL 94-V0 rated glass-reinforced thermoplastic base adds insulation and support for panel or bulkhead mounting.\u003c\/li\u003e\n\u003cli\u003eTerminal stud torque rating of 140 in-lb helps installers tighten connections to a defined value instead of guessing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis PowerBar 600A BusBar range is offered in two terminal-count configurations, so the main difference is how many high-current stud connections are available on the same style of bus bar.\u003c\/p\u003e\u003cp\u003eBoth variants use 3\/8\"-16 stud terminals and share the same 600A DC, 545A AC, 48V DC, and 300V AC ratings. The right configuration depends on how many heavy cable takeoffs need to land at the bussing point.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2104: 4 terminals. This version suits smaller high-current layouts, such as a main battery connection with a limited number of branch cables or charging leads.\u003c\/li\u003e\n\u003cli\u003e2107: 8 terminals. This version gives more landing points for systems with multiple heavy cable runs, such as larger battery banks, inverter circuits, windlass wiring, or grouped distribution feeds.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the bus bar where cable runs can be kept short, supported, and protected from accidental contact. Engine rooms, battery compartments, electrical panels, and service lockers are common locations, provided the mounting surface is solid and the terminals remain accessible.\u003c\/p\u003e\u003cp\u003eUse properly crimped marine cable lugs sized for the conductor and stud, then tighten the stud hardware to the specified torque. High-current connections should be checked as part of routine electrical maintenance, especially after installation, after heavy vibration, or after work has been done near the battery or charging system.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis bus bar is a fit for boats that need a compact high-amperage junction point rather than stacking multiple heavy cables directly on a battery post or device terminal. It is useful on cruising boats, fishing boats, workboats, and refits where the electrical system is being cleaned up or expanded.\u003c\/p\u003e\u003cp\u003eBefore installation, confirm cable lug hole size, available mounting space, conductor routing, circuit protection, and whether the bus bar will be used for positive, negative, or ground bussing in the vessel’s wiring plan.\u003c\/p\u003e\u003ch6\u003eMaterials and corrosion resistance\u003c\/h6\u003e\u003cp\u003eThe tin-plated copper bus supports conductivity while giving the exposed metal surface better resistance to the conditions found around marine electrical compartments. The insulated base helps separate the energized bus from the mounting surface, but the installation should still be protected from loose gear, tools, and unintended contact.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"4","offer_id":52023042146485,"sku":"QBP412057-V1","price":176.99,"currency_code":"USD","in_stock":true},{"title":"8","offer_id":52023042179253,"sku":"QBP412057-V8","price":244.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333349_qbp412057.jpg?v=1780191637"},{"product_id":"qbp347838","title":"RIGID Industries - D-XL Series Cover - Polycarbonate Plastic","description":"\u003cp\u003eIntroducing RIGID light covers, the ultimate solution for combining style and functionality. Elevate the appearance of your vehicle while safeguarding your valuable investment. Crafted from durable polycarbonate plastic, these light covers provide an additional layer of protection for the lens of your LED light. \u003c\/p\u003e \u003cp\u003eThe ingenious design allows for effortless snapping on and off, making it a breeze to swap covers whenever you desire. This feature proves especially beneficial for those residing in states that mandate covers on accessory lights. With RIGID light covers, complying with regulations has never been more convenient. \u003c\/p\u003e \u003cp\u003eThe easy-to-use nature of these covers doesn't compromise their ability to offer enhanced protection. Constructed with robust polycarbonate plastic, they ensure that your lights are shielded from potential damage. Feel confident knowing that your LED lights are guarded against the elements, impacts, and other hazards. \u003c\/p\u003e \u003cp\u003eDesigned to perfectly fit the D-XL Series and Radiance XL series lights, these light covers are tailored for a seamless integration. Their precise dimensions of 4\" x 4\" guarantee a snug fit, ensuring optimal functionality and aesthetics. \u003c\/p\u003e \u003cp\u003eAvailable in a range of variations, the black option offers a sleek and timeless look, while the yellow variation adds a vibrant and eye-catching touch. Choose the color that best suits your preferences and complements your vehicle's style. \u003c\/p\u003e \u003cp\u003eUpgrade your lighting setup with RIGID light covers and experience the ideal combination of protection, style, and ease-of-use.\u003c\/p\u003e","brand":"RIGID Industries","offers":[{"title":"Black","offer_id":52023048372405,"sku":"QBP347838-V6","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":52023048405173,"sku":"QBP347838-V2","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1206693_qbp347838.jpg?v=1763249726"},{"product_id":"qbp347967","title":"RIGID Industries - E-Series Lens Cover - Polycarbonate Plastic","description":"\u003ch4\u003eEnhanced Protection and Style for Your LED Lights\u003c\/h4\u003e\u003cp\u003eThe RIGID Industries E-Series Lens Cover 6\" in Black is designed to offer both style and function for your marine or off-road vehicle. These lens covers provide a unique and sleek look while safeguarding your LED light investment. Made from durable polycarbonate plastic, this lens cover offers an extra layer of protection, ensuring your lights are shielded from the harshest elements, whether on the water or on the road. Ideal for states that require covers on accessory lights, this product is both practical and stylish.\u003c\/p\u003e\u003ch4\u003eBuilt for Durability and Ease of Use\u003c\/h4\u003e\u003cp\u003eConstructed from high-quality polycarbonate plastic, the E-Series Lens Cover is designed to withstand tough conditions, providing long-lasting protection for your LED lights. The snap-on design allows for quick and easy installation or removal, giving you the flexibility to swap covers as needed without any hassle.\u003c\/p\u003e\u003ch4\u003eAvailable Finishes\u003c\/h4\u003e\u003cp\u003eThis lens cover is available in a sleek black finish, complementing your vehicle’s aesthetic while adding a protective layer to your LED lights.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Polycarbonate Construction:\u003c\/strong\u003e Provides superior protection for your LED lights.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Snap-On Design:\u003c\/strong\u003e Allows for quick installation and removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylish and Functional:\u003c\/strong\u003e Enhances the look of your vehicle while offering practical protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVariants Available\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e106913:\u003c\/strong\u003e Black \/ 6\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e106923:\u003c\/strong\u003e Clear \/ 6\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e104933:\u003c\/strong\u003e Yellow \/ 4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e106933:\u003c\/strong\u003e Yellow \/ 6\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese variants offer options in size and color, allowing you to choose the perfect lens cover to match your specific needs and preferences.\u003c\/p\u003e","brand":"RIGID Industries","offers":[{"title":"Black \/ 6\"","offer_id":52023049257141,"sku":"QBP347967-6","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Clear \/ 6\"","offer_id":52023049289909,"sku":"QBP347967-2","price":18.99,"currency_code":"USD","in_stock":false},{"title":"Yellow \/ 6\"","offer_id":52023049322677,"sku":"QBP347967-9","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ 4\"","offer_id":52023049355445,"sku":"QBP347967-1","price":13.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1206717_qbp347967.jpg?v=1763249728"},{"product_id":"qbp348310","title":"RIGID Industries - E-Series\/RDS-Series Radiance Lens Cover - 10\", Polycarbonate Plastic","description":"\u003cp\u003eIntroducing RIGID light covers, the ultimate combination of style and functionality. Designed to enhance the look of your vehicle while safeguarding your valuable LED lights, these covers are a must-have accessory. Crafted from high-quality polycarbonate plastic, they provide an additional layer of protection for the lens, ensuring durability and longevity.\u003c\/p\u003e \u003cp\u003eThe convenience of these light covers is unparalleled. With their snap-on and snap-off mechanism, swapping them out has never been easier. Say goodbye to complicated installations or time-consuming procedures. Whether you want to switch covers for a different look or comply with state regulations that require accessory light covers, RIGID light covers have got you covered.\u003c\/p\u003e \u003cp\u003eChoose from a variety of options to match your preferences and vehicle aesthetics. The sleek and versatile Black option adds a touch of sophistication and blends seamlessly with any color scheme. If you prefer a transparent cover that allows the full brilliance of your LED lights to shine through, the Clear variant is the perfect choice. For a bold and vibrant look that stands out, the Yellow cover is a striking option that adds a dash of personality to your vehicle.\u003c\/p\u003e \u003cp\u003eInvest in RIGID light covers to not only elevate the appearance of your vehicle but also protect your LED lights from potential damage. Made with the highest standards of quality and craftsmanship, these covers ensure that your investment remains intact and performs optimally for years to come. Experience the difference with RIGID light covers and enjoy the perfect combination of style, function, and peace of mind.\u003c\/p\u003e","brand":"RIGID Industries","offers":[{"title":"Black","offer_id":52023049519285,"sku":"QBP348310-V8","price":15.99,"currency_code":"USD","in_stock":false},{"title":"Yellow","offer_id":52023049552053,"sku":"QBP348310-V2","price":15.99,"currency_code":"USD","in_stock":true},{"title":"Clear","offer_id":52023049584821,"sku":"QBP348310-V9","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1206727_qbp348310.jpg?v=1763249731"},{"product_id":"qbp348701","title":"RIGID Industries - Q-Series Lens Cover - Polycarbonate Plastic","description":"\u003cp\u003eIntroducing RIGID light covers, the ultimate combination of style and functionality. Designed to enhance the appearance of your vehicle while safeguarding your valuable investment, these light covers offer a practical and aesthetically pleasing solution. Crafted from high-quality polycarbonate plastic, they provide an additional layer of protection for the lenses of your LED lights. With their effortless snap-on and snap-off design, swapping covers has never been easier. Moreover, these covers comply with regulations in states that mandate accessory light covers. \u003c\/p\u003e \u003cp\u003eWith their user-friendly design, RIGID light covers ensure a hassle-free experience. Simply snap them on or off as needed, allowing you to customize your lighting setup effortlessly. Constructed from durable polycarbonate plastic, these covers guarantee long-lasting performance while safeguarding your valuable LED light lenses. They offer an extra layer of protection, shielding your lights from potential damage and prolonging their lifespan. \u003c\/p\u003e \u003cp\u003eRIGID light covers are available in a clear variation, preserving the natural appearance of your LED lights. This option maintains the original clarity and brightness of your lights while providing the desired protection. Additionally, for those seeking a touch of uniqueness and distinction, the yellow variation adds a vibrant and eye-catching element to your vehicle's lighting setup. \u003c\/p\u003e \u003cp\u003eUpgrade your lighting game with RIGID light covers. Enhance the style, protect your investment, and ensure compliance with regulations where necessary. Experience the convenience and durability of these snap-on covers, made from durable polycarbonate plastic for an extra layer of protection. Choose the clear or yellow variation, and let your vehicle shine with a distinct and personalized touch.\u003c\/p\u003e","brand":"RIGID Industries","offers":[{"title":"Clear","offer_id":52023049846965,"sku":"QBP348701-V6","price":0.0,"currency_code":"USD","in_stock":false},{"title":"Yellow","offer_id":52023049879733,"sku":"QBP348701-V1","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1206732_qbp348701.jpg?v=1763249733"},{"product_id":"qbp903708","title":"Fusion - Retrofit Kit 600\/700 to RA770 w\/Stereo Cover","description":"\u003cp\u003eThe Retrofit Kit 600\/700 to RA770 with Stereo Cover is the perfect solution for seamlessly integrating your Apollo RA770 marine stereo into an existing Fusion 755 Series, 750 Series, or 650 Series cutout. With this kit, you can easily upgrade your audio system without the need for extensive modifications or adjustments, ensuring a hassle-free installation process.\u003c\/p\u003e \u003cp\u003eAdditionally, the kit includes a silicone dust cover that is specifically designed to fit your Apollo RA770 stereo. This cover helps protect your stereo from dust and debris, ensuring its longevity and maintaining its optimal performance over time. With its custom fit and durable construction, the silicone dust cover provides an added layer of protection for your Apollo RA770.\u003c\/p\u003e \u003cp\u003ePlease note that this product is sold inpidually and contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. It is important to handle and install this product with caution, following the necessary safety guidelines. For more detailed information regarding the potential risks and safety precautions, please refer to the P65Warnings.ca.gov website.\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":52023050404021,"sku":"QBP903708","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1206755_qbp903708.jpg?v=1763249741"},{"product_id":"qbp900974","title":"Fusion - S00-00522-04 Fusion MS-RA205\/50 Screw Cover","description":"\u003cp\u003eThe S00-00522-04 Screw Cover is a specially designed accessory for Fusion's MS-RA205\/50 marine stereos. This screw cover provides a clean and finished appearance by concealing the mounting screws of the stereo, giving it a polished and professional look.\u003c\/p\u003e \u003cp\u003eMade with high-quality materials, this screw cover ensures durability and longevity, making it suitable for marine environments. With its precise fit and easy installation, it seamlessly integrates with the MS-RA205\/50 stereo, enhancing its overall aesthetic appeal while providing protection against dust and other elements.\u003c\/p\u003e \u003cp\u003ePlease note that the S00-00522-04 Screw Cover is designed specifically for Fusion's MS-RA205\/50 marine stereos and is a recommended accessory for a seamless and visually appealing installation.\u003c\/p\u003e \u003cp\u003eWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":52023050436789,"sku":"QBP900974","price":4.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1206756_qbp900974.jpg?v=1763249741"},{"product_id":"qbp973651","title":"Fusion - NRX300 Screw Covers","description":"\u003cp\u003eThe NRX300 Screw Covers are designed specifically for Fusion's NRX300 Remote Control. These screw covers provide a clean and finished look by concealing the screws used to mount the remote control.\u003c\/p\u003e \u003cp\u003eSold as a pair, these screw covers are easy to install and ensure a secure and professional installation of the NRX300 Remote Control. With their precise fit and matching design, they seamlessly integrate with the remote control, enhancing its overall appearance.\u003c\/p\u003e \u003cp\u003ePlease note that this product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. It is important to take necessary precautions, and for more detailed information regarding potential risks and safety guidelines, you can refer to the P65Warnings.ca.gov website.\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":52023050731701,"sku":"QBP973651","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1206768_qbp973651.jpg?v=1763249748"},{"product_id":"qbp634978","title":"Fusion - MS-RA770 Screw Covers","description":"\u003cp\u003eThe MS-RA770 Screw Covers are designed specifically for Fusion's Apollo Marine Entertainment System, model MS-RA770. These screw covers are sold as a pair, providing a comprehensive solution for protecting and enhancing the appearance of the entertainment system.\u003c\/p\u003e \u003cp\u003ePlease be aware that this product comes with a warning. It contains chemicals that are recognized by the State of California to have the potential to cause cancer, birth defects, or other reproductive harm. For additional information regarding this warning, it is advised to visit P65Warnings.ca.gov. It is important to consider this information before purchasing or using the product to make an informed decision.\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":52023050797237,"sku":"QBP634978","price":9.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1206769_qbp634978.jpg?v=1763249749"},{"product_id":"qbp113459","title":"Fusion - MS-RA70 Screw Cover","description":"\u003cp\u003eThe MS-RA70 Screw Cover is an accessory designed for Fusion's Marine Entertainment System with Bluetooth. It serves as a protective cover that screws onto the system, helping to safeguard it from external elements and potential damage. \u003c\/p\u003e \u003cp\u003ePlease note that this product comes with a warning. It contains certain chemicals that are recognized by the State of California to be capable of causing cancer, birth defects, or other reproductive harm. To obtain further details regarding this warning, you can visit P65Warnings.ca.gov. It is important to consider this information before purchasing or using the product.\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":52023050961077,"sku":"QBP113459","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1206774_qbp113459.jpg?v=1763249753"},{"product_id":"qbp677013","title":"Fusion - MS-SRX400 Screw Covers","description":"\u003cp\u003eComplete the sleek and polished look of your Fusion Apollo Marine Entertainment System with the MS-SRX400 Screw Covers. Designed specifically for the MS-SRX400 system, these screw covers provide a clean and professional finish to your installation.\u003c\/p\u003e \u003cp\u003eWith a pair of screw covers included in each package, you'll have everything you need to neatly conceal the screws of your MS-SRX400 system. This not only enhances the visual appeal but also helps protect the system from dust and other contaminants. Ensure a seamless and refined installation with these screw covers that are tailored to fit your Fusion Apollo Marine Entertainment System.\u003c\/p\u003e \u003cp\u003ePlease note that this product is sold as a pair. Additionally, it's important to be aware that this product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more detailed information regarding the potential risks associated with this product, please visit the P65Warnings.ca.gov website.\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":52023050993845,"sku":"QBP677013","price":4.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1206775_qbp677013.jpg?v=1763249753"},{"product_id":"qbp947278","title":"Fusion - Stereo Cover f\/MS-RA670, MS-RA-210 and MS-RA60","description":"\u003cp\u003eIntroducing the Stereo Cover for MS-RA670, MS-RA210, and MS-RA60, a reliable accessory designed to protect the front face of your Apollo stereo and keep it free from dust. Crafted from durable silicone material, this cover offers a protective barrier for your stereo, ensuring its longevity and optimal performance.\u003c\/p\u003e \u003cp\u003eThe Stereo Cover is specifically designed to be compatible with the MS-RA670, MS-RA210, and MS-RA60 models. By using this cover, you can effectively safeguard the front face of your stereo from dust, dirt, and other debris, preserving its functionality and appearance. The silicone construction provides a secure fit, keeping the cover in place while allowing for easy removal when needed.\u003c\/p\u003e \u003cp\u003ePlease note that the Stereo Cover for MS-RA670, MS-RA210, and MS-RA60 is sold inpidually, allowing you to purchase the desired quantity for your specific needs.\u003c\/p\u003e \u003cp\u003ePlease be aware that this product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit P65Warnings.ca.gov.\u003c\/p\u003e \u003cp\u003eNote: The above description is a fictional description created by ChatGPT based on the given information. It does not represent an actual product or endorsement.\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":52023051092149,"sku":"QBP947278","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1206778_qbp947278.jpg?v=1763249756"},{"product_id":"qbp994836","title":"Fusion - Ethernet Cable Connector","description":"\u003cp\u003eThe Ethernet Cable Connector is a practical solution for extending Ethernet cables by joining RJ45 Male connections. With two Female RJ45 connections, this connector enables you to seamlessly extend the length of your Ethernet cables, allowing for greater flexibility in networking setups.\u003c\/p\u003e \u003cp\u003eSold as an inpidual piece, the Ethernet Cable Connector offers convenience and versatility in connecting Ethernet cables. Whether you need to extend the reach of your network connection for home or professional use, this connector provides a reliable and straightforward solution.\u003c\/p\u003e \u003cp\u003ePlease note that this product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more detailed information, we recommend referring to the provided link or consulting the relevant authorities.\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":52023051616437,"sku":"QBP994836","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1206799_qbp994836.jpg?v=1763249766"},{"product_id":"qbp553767","title":"Blue Sea Systems AC Insulating Cover, 1 Module","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1331 is an AC insulating cover for one module in a compatible Blue Sea Systems panel. It isolates 360 panel AC components and circuits from DC system elements, helps meet ABYC safety requirements where AC and DC loads share the same panel area, and adds mechanical protection when the back of the panel extends into a locker.\u003c\/p\u003e\u003cp\u003eThis is a modular cover piece that works with interlocking SIDE, TOP, and END sections, so the enclosure can be built around larger AC components when needed. Wire breakouts allow cable runs in any direction, which helps when the wiring path has to turn quickly behind the panel or space is limited.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module AC insulating cover for compatible Blue Sea Systems panel layouts\u003c\/li\u003e\n\u003cli\u003eIsolates 360 panel AC components and circuits from DC system elements\u003c\/li\u003e\n\u003cli\u003eMeets ABYC safety requirements for panels with combined AC and DC loads\u003c\/li\u003e\n\u003cli\u003eAdds mechanical protection behind panels that protrude into lockers\u003c\/li\u003e\n\u003cli\u003eInterlocking SIDE, TOP, and END pieces can be stacked around larger AC components\u003c\/li\u003e\n\u003cli\u003eWire breakouts allow conductor access from any direction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is the 1-module version, so fit depends on the panel layout it is being used with. It is used with compatible Blue Sea Systems AC panels across selected 120V, 230V, and 120\/240V configurations, including source selector, ELCI, and main plus branch layouts. Matching the panel model is the right way to confirm fit before installation.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eThis cover makes the most sense where an AC panel is mounted against a locker, liner, or service space that can be reached from behind. It creates an insulated barrier around the back of the panel while still leaving room to route conductors through the breakout openings.\u003c\/p\u003e\u003cp\u003eIt also makes practical sense on boats that carry both AC and DC circuits in the same electrical area and need better separation between those systems. That is common on cruising boats, workboats, and larger center consoles where panels are often installed in tight interior spaces.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023053058229,"sku":"QBP553767","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329889_qbp553767.jpg?v=1780191641"},{"product_id":"qbp291425","title":"Plash - Insulated Power Wire - 2 Conductor, Black PVC","description":"\u003ch4\u003eSail Securely with the Plash Insulated Power Wire: The Mariner's Choice\u003c\/h4\u003e \u003cp\u003ePresenting the Plash Insulated Power Wire - an indispensable tool for any marine devotee seeking a superior and trustworthy wiring solution. This 2-conductor wire is expertly designed to offer peak efficiency and performance in marine environments, making it an ideal fit for a diverse range of applications.\u003c\/p\u003e \u003ch4\u003eUnleashing the Power: A Dive into the Plash Wire's Technical Specifications\u003c\/h4\u003e \u003cp\u003eOur Plash Insulated Power Wire is specially engineered to withstand marine environments and provide high-quality, consistent power. Its 2-conductor design allows for a multitude of marine applications, whether you're wiring your navigation system or connecting marine appliances. The insulation also assures resistance against harsh environmental factors such as salt water, thereby ensuring prolonged wire life.\u003c\/p\u003e \u003ch4\u003ePerfectly Sized: Dimensions of the Plash Insulated Power Wire\u003c\/h4\u003e \u003cp\u003eThe Plash Insulated Power Wire comes in an array of sizes suitable for various uses. With a choice of AWG sizes - 14G, 18G, and 20G - you can select the perfect wire thickness for your specific marine needs.\u003c\/p\u003e \u003ch4\u003ePower at Sea: Key Highlights of the Plash Insulated Power Wire\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eSpecifically designed for maximum efficiency in marine environments\u003c\/li\u003e \u003cli\u003e2-conductor design for versatile marine applications\u003c\/li\u003e \u003cli\u003eInsulated to withstand harsh environmental factors\u003c\/li\u003e \u003cli\u003eAvailable in various AWG sizes to suit specific needs\u003c\/li\u003e \u003cli\u003eDurable and reliable performance for peace of mind at sea\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eDesigned for Your Needs: Variations of the Plash Insulated Power Wire\u003c\/h4\u003e \u003cul\u003e \u003cli\u003ePlash Insulated Power Wire - 14G AWG\u003c\/li\u003e \u003cli\u003ePlash Insulated Power Wire - 18G AWG\u003c\/li\u003e \u003cli\u003ePlash Insulated Power Wire - 20G AWG\u003c\/li\u003e \u003c\/ul\u003e","brand":"Plash","offers":[{"title":"14G","offer_id":52023057154229,"sku":"QBP291425-V7","price":2.89,"currency_code":"USD","in_stock":true},{"title":"18G","offer_id":52023057186997,"sku":"QBP291425-V5","price":1.85,"currency_code":"USD","in_stock":true},{"title":"20G","offer_id":52023057219765,"sku":"QBP291425-V3","price":1.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1207107_qbp291425.jpg?v=1763249836"},{"product_id":"qbp344452","title":"RIGID Industries - Adapt Lens Cover - Plastic","description":"\u003cp\u003eIntroducing the ADAPT Lens Cover, a must-have marine accessory that combines style and functionality. With a range of color options available, you can customize your vehicle's look while ensuring the utmost protection for your ADAPT light. Crafted from high-quality polycarbonate plastic, these covers offer an additional layer of defense for the lens, safeguarding your investment against potential damage. Swapping out the covers is a breeze, thanks to their convenient snap-on and snap-off design, making it effortless to adapt to different lighting needs. Furthermore, these covers are ideal for inpiduals residing in states that mandate the use of covers on accessory lights. \u003c\/p\u003e \u003cp\u003eOur ADAPT Lens Covers are designed to be user-friendly, allowing for easy installation and removal. Simply snap them on or off as needed, granting you quick access to your ADAPT light. The covers are constructed from durable polycarbonate plastic, renowned for its strength and impact resistance. This ensures that your ADAPT light's lens remains protected, even in harsh marine environments where bumps and vibrations are common. Rest assured that these covers will serve as an additional barrier against dust, debris, and other potential hazards, maintaining the optimal performance and longevity of your ADAPT light.\u003c\/p\u003e \u003cp\u003eAvailable in a variety of colors, the ADAPT Lens Covers cater to different preferences and styles. Choose the Clear option for a sleek, transparent look that allows the full brilliance of your ADAPT light to shine through. Opt for the Black variation to add a touch of sophistication and create a bold statement on your marine vehicle. For those seeking enhanced visibility and a vibrant appearance, the Yellow color option is an excellent choice, providing a distinct and eye-catching aesthetic.\u003c\/p\u003e \u003cp\u003eUpgrade your marine lighting setup with the ADAPT Lens Cover, the perfect accessory that combines protection and personalization. With its easy snap-on and snap-off feature, durable polycarbonate construction, and a range of color options, these covers offer a seamless blend of practicality and style. Safeguard your investment and comply with local regulations by adding the ADAPT Lens Cover to your marine arsenal today.\u003c\/p\u003e \u003c!--- cis2:mm5snJRn ---\u003e","brand":"RIGID Industries","offers":[{"title":"Black","offer_id":52023059415221,"sku":"QBP344452-V9","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":52023059447989,"sku":"QBP344452-V3","price":22.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1207267_qbp344452.jpg?v=1763249875"},{"product_id":"qbp344518","title":"RIGID Industries - D-Series Lens Cover - Polycarbonate Plastic","description":"\u003cp\u003eIntroducing RIGID light covers, the ultimate solution for both style and function. Designed to enhance the appearance of your vehicle, these light covers provide a distinctive and unique look while ensuring the protection of your valuable investment. Crafted from a robust polycarbonate plastic material, these covers offer an additional layer of safeguarding for the lens of your LED lights. With their simple snap-on and snap-off mechanism, changing the covers becomes a hassle-free task. Moreover, these covers comply with the requirements of states that mandate the use of accessory light covers. \u003c\/p\u003e \u003cp\u003eAvailable in a variety of options, including Black, Clear, and Yellow, you can choose the color that best suits your preferences and complements your vehicle's aesthetics. Upgrade your lights with RIGID light covers today and experience the perfect blend of style and functionality.\u003c\/p\u003e \u003c!--- cis2:mm5snJRn ---\u003e","brand":"RIGID Industries","offers":[{"title":"Yellow","offer_id":52023059611829,"sku":"QBP344518-V6","price":11.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":52023059644597,"sku":"QBP344518-V9","price":11.99,"currency_code":"USD","in_stock":true},{"title":"Clear","offer_id":52023059677365,"sku":"QBP344518-V4","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1207273_qbp344518.jpg?v=1763249877"},{"product_id":"qbp344622","title":"RIGID Industries - D-SS Series Lens Cover - Polycarbonate Plastic","description":"\u003cp\u003eIntroducing the D-SS Series Lens Cover, a marine product designed to enhance both the style and functionality of your vehicle. Crafted with utmost precision, these RIGID light covers offer a unique and captivating look while providing vital protection for your LED light lens. Constructed from durable polycarbonate plastic, these covers serve as an additional layer of safeguarding for your investment.\u003c\/p\u003e \u003cp\u003eThe ingenious design of these lens covers ensures effortless installation and removal. With a simple snap-on and snap-off mechanism, you can effortlessly swap out covers whenever desired. This user-friendly feature adds convenience and flexibility to your lighting setup, making maintenance a breeze. Moreover, these covers are particularly ideal for inpiduals residing in states that mandate the use of covers on accessory lights.\u003c\/p\u003e \u003cp\u003eThe lens covers are expertly crafted using high-quality polycarbonate plastic. This material not only ensures durability but also guarantees optimal protection against external elements. Whether it's road debris, dust, or other potential hazards, these lens covers shield your LED light lens, preventing any potential damage.\u003c\/p\u003e \u003cp\u003eAvailable in two variations, the D-SS Series Lens Cover allows you to choose the perfect fit for your preferences. Opt for the sleek and timeless Black variant, or make a bold statement with the vibrant Yellow variant. Whichever color you choose, these covers will undoubtedly elevate the appearance of your vehicle, adding a touch of style and inpiduality.\u003c\/p\u003e \u003cp\u003eUpgrade your marine lighting setup with the D-SS Series Lens Cover, combining functionality and aesthetics to protect your LED light lens with style.\u003c\/p\u003e \u003c!--- cis2:mm5snJRn ---\u003e","brand":"RIGID Industries","offers":[{"title":"Yellow","offer_id":52023059710133,"sku":"QBP344622-V2","price":15.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":52023059742901,"sku":"QBP344622-V3","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1207276_qbp344622.jpg?v=1763249877"},{"product_id":"qbp345602","title":"RIGID Industries - 360-Series LED Cover - Polycarbonate Plastic","description":"\u003cp\u003eIntroducing RIGID light covers, the ultimate combination of style and functionality for your vehicle. Designed to give your ride a distinct and eye-catching appearance, these light covers also serve as a safeguard for your valuable investment. Crafted from durable polycarbonate plastic, they provide an additional layer of protection for the lens of your LED light.\u003c\/p\u003e \u003cp\u003eThanks to their innovative design, these covers can be effortlessly snapped on and off, making it a breeze to switch them out whenever desired. This user-friendly feature ensures convenience and flexibility for your lighting needs. Moreover, these covers are particularly ideal for areas where accessory lights necessitate the use of protective covers.\u003c\/p\u003e \u003cp\u003eWith their easy installation process, you won't have to worry about complicated setups or extensive modifications. Simply snap them on or off with ease and enjoy the added benefits they bring. Constructed from polycarbonate plastic, these covers possess exceptional durability, ensuring longevity and reliability in any conditions.\u003c\/p\u003e \u003cp\u003eEnhance the visual appeal of your vehicle while safeguarding your LED lights with RIGID light covers. Don't settle for ordinary when you can have extraordinary. Choose from our variation of clear covers to suit your preferences and give your vehicle a touch of uniqueness.\u003c\/p\u003e \u003c!--- cis2:mm5snJRn ---\u003e","brand":"RIGID Industries","offers":[{"title":"Clear","offer_id":52023060496565,"sku":"QBP345602-V5","price":41.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1207313_qbp345602.jpg?v=1763249884"},{"product_id":"qbp345844","title":"RIGID Industries - Adapt XP Lens - 9-36V, 50,000h, IP68, 104W","description":"\u003cp\u003eIntroducing the Adapt XP with Amber Pro Lens by RIGID, a groundbreaking marine product that combines advanced technology and colored lenses to enhance your outdoor experiences. Whether you're hitting the trail, embarking on an overlanding adventure, or racing, good visibility is crucial. That's why RIGID developed the Amber PRO Edition specifically for high dust, smoke, and other low-visibility conditions.\u003c\/p\u003e \u003cp\u003eThe Amber PRO Lens offers superior performance in adverse lighting conditions, leveraging the unique attributes of the human eye to process light in longer wavelengths. By reducing glare, enhancing definition, and improving contrast, it allows you to see farther than traditional white lighting. Prepare to take your visibility to the next level.\u003c\/p\u003e \u003cp\u003eThe Adapt XP is packed with cutting-edge patented technology. It utilizes an internal GPS module to determine the vehicle's speed, enabling the Adapt's Active View Technology to create an ideal beam pattern tailored to the driver's needs. Crafted with a high-strength aluminum heat sink and an impact-resistant polycarbonate lens, the Adapt XP is now available in the rich Amber PRO color. Experience the power of Active View Technology and the Amber PRO Edition, making it easier than ever to Own The Night.\u003c\/p\u003e \u003cp\u003eIn addition to its groundbreaking features, the Adapt XP with Amber PRO lens boasts a range of specifications and functionalities that set it apart. It operates on a wide voltage range of 9-36 VDC, offering versatility for various installations. With its flying leads, the Adapt XP ensures universal compatibility. Its alloy housing and heatsink provide durability and efficient heat dissipation. The light is equipped with reverse polarity protection, over\/under voltage protection, and is IP68 compliant for dust and water ingress. A pressure equalizing vent ensures optimal performance even in challenging conditions. Furthermore, the Adapt XP incorporates patented optics and guarantees a long LED lifespan of over 50,000 hours. Please note that the wiring harness is sold separately.\u003c\/p\u003e \u003cp\u003eRIGID stands behind the quality of their products, offering a limited lifetime warranty for the Adapt XP with Amber PRO lens. However, it's important to note that this product is designed for off-road use only.\u003c\/p\u003e \u003cp\u003eThe Adapt XP with Amber PRO lens weighs 2.80 lbs and features a spot optic, delivering a focused beam of light. It operates at 104 watts with an amp draw of 7.4. The raw lumens output is an impressive 10,956, providing exceptional brightness. The lux at 10 meters measures 564.7, while the beam distance at 1 lux reaches 237.6 meters. For greater coverage, the beam distance at 0.25 lux extends up to 475.3 meters. The peak beam intensity is 56,470 candela, and the horizontal beam angle spans 34.2 degrees.\u003c\/p\u003e \u003cp\u003eWhen you purchase the Adapt XP with Amber PRO lens, you'll receive a comprehensive package to ensure easy installation and convenience. The product comes with the Adapt XP light itself, equipped with the Amber PRO lens, a magnetic reed power clip, surface mount brackets, and the necessary hardware.\u003c\/p\u003e \u003cp\u003eChoose the variation that best suits your needs, whether you require a single unit or a pair of Adapt XP lights. Elevate your outdoor adventures with the Adapt XP and experience the power of RIGID's advanced technology combined with the benefits of the Amber PRO lens.\u003c\/p\u003e","brand":"RIGID Industries","offers":[{"title":"No","offer_id":52023060824245,"sku":"QBP345844-V0","price":489.99,"currency_code":"USD","in_stock":false},{"title":"Yes","offer_id":52023060857013,"sku":"QBP345844-V8","price":819.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1207330_qbp345844.jpg?v=1763249887"},{"product_id":"qbp345851","title":"RIGID Industries - Adapt XP Light Cover - Polycarbonate Plastic","description":"\u003cp\u003eIntroducing RIGID light covers, the perfect accessory to enhance both style and functionality for your vehicle. Crafted with precision using durable polycarbonate plastic, these light covers offer exceptional protection for your investment. With their easy-to-snap-on design, you can effortlessly add a layer of defense to your RIGID Adapt XP LED lights.\u003c\/p\u003e \u003cp\u003eThe Adapt XP covers come in three stunning variations: clear, amber, and black. These color options allow you to customize your lighting setup while adhering to any regulations that require covers on accessory lighting. Whether you prefer a transparent cover that showcases the brilliance of your LED lights or a sleek black cover for a more mysterious look, the choice is yours.\u003c\/p\u003e \u003cp\u003eBy incorporating RIGID light covers into your vehicle, you not only safeguard your Adapt XP LED lights from potential damage but also elevate their aesthetic appeal. These covers serve as an extra shield, protecting your lights from debris, rocks, and other hazards that may be encountered during your off-road adventures.\u003c\/p\u003e \u003cp\u003eDesigned for convenience, the snaps-on-and-off mechanism ensures a hassle-free installation process. With just a simple click, you can attach or detach the light covers as needed, allowing for quick access to your lights when required.\u003c\/p\u003e \u003cp\u003eInvest in RIGID light covers today and experience the perfect blend of protection and style for your RIGID Adapt XP LED lights. Choose from the vibrant yellow, crystal-clear, or sleek black variations to enhance your vehicle's appearance and safeguard your lighting investment for years to come.\u003c\/p\u003e \u003c!--- cis2:mm5snJRn ---\u003e","brand":"RIGID Industries","offers":[{"title":"Yellow","offer_id":52023060889781,"sku":"QBP345851-V1","price":19.99,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":52023060922549,"sku":"QBP345851-V5","price":19.99,"currency_code":"USD","in_stock":false},{"title":"Clear","offer_id":52023060955317,"sku":"QBP345851-V7","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1207334_qbp345851.jpg?v=1763249888"},{"product_id":"qbp480952","title":"Fusion - Marine Stereo Dust Cover f\/ MS-RA70","description":"\u003cp\u003eThe Marine Stereo Dust Cover is a protective accessory designed specifically for the MS-RA70 Fusion Marine Stereo. This cover helps shield the stereo from dust, dirt, and other contaminants that can potentially affect its performance. It is a compatible accessory that ensures the longevity and functionality of your MS-RA70 Fusion Marine Stereo.\u003c\/p\u003e \u003cp\u003eThis dust cover is specifically designed for the MS-RA70 Marine Stereo and is a perfect fit for it. By using this cover, you can keep your stereo protected from environmental elements, ensuring its optimal performance and longevity. Please note that this product may contain chemicals that are known to the State of California to cause cancer, birth defects, or other reproductive harm, in compliance with relevant regulations. For more information, refer to the provided link or consult the appropriate authorities.\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":52023062692021,"sku":"QBP480952","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1207392_qbp480952.jpg?v=1763249915"},{"product_id":"qbp948571","title":"Fusion - Dust Cover f\/MS-NRX300","description":"\u003cp\u003eThe Dust Cover for MS-NRX300 is a protective accessory designed to fit the Fusion NRX300 Wired Waterproof Remote Control. With its black color and custom fit, this dust cover provides full-function protection for your remote control, ensuring that it stays clean and free from dust and debris when not in use.\u003c\/p\u003e \u003cp\u003eCompatible with the Fusion NRX300 remote control, this dust cover is a convenient addition to your marine audio setup. It helps maintain the longevity and performance of your remote control, keeping it in optimal condition for reliable operation while offering zone control for Fusion marine products such as the 70, 200, 205, 650, and 750.\u003c\/p\u003e \u003cp\u003ePlease be aware that this product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more detailed information, we recommend referring to the provided link or consulting the relevant authorities.\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":52023062757557,"sku":"QBP948571","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1207393_qbp948571.jpg?v=1763249916"},{"product_id":"qbp266439","title":"Fusion - Stereo Cover f\/ 650 \u0026 750 Series Stereos","description":"\u003cp\u003eIntroducing the Stereo Cover for 650 \u0026amp; 750 Series Stereos, a reliable accessory designed to protect the front face of your Fusion 650 or 750 Series stereo from dust and debris. Crafted from high-quality silicone material, this cover offers durability and ensures that your stereo remains free from damage.\u003c\/p\u003e \u003cp\u003eThe Stereo Cover is specifically compatible with the Series 650 Fusion Stereos and Series 750 Fusion Stereos. By using this cover, you can effectively shield the front face of your stereo, preserving its performance and appearance. The silicone construction provides a snug fit, keeping the cover securely in place while allowing for easy removal when needed.\u003c\/p\u003e \u003cp\u003ePlease note that the Stereo Cover for 650 \u0026amp; 750 Series Stereos is sold inpidually, allowing you to customize your purchase according to your specific needs.\u003c\/p\u003e \u003cp\u003ePlease be aware that this product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit P65Warnings.ca.gov.\u003c\/p\u003e \u003cp\u003eNote: The above description is a fictional description created by ChatGPT based on the given information. It does not represent an actual product or endorsement.\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":52023062921397,"sku":"QBP266439","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1207399_qbp266439.jpg?v=1763249918"},{"product_id":"qbp335876","title":"Fusion - Stereo Cover f\/MS-RA770 Apollo Series","description":"\u003cp\u003eIntroducing the Stereo Cover for MS-RA770 Apollo Series, a reliable accessory designed to keep the front face of your Apollo stereo protected and free from dust. Crafted from high-quality silicone material, this cover ensures durability and provides an added layer of defense for your stereo unit.\u003c\/p\u003e \u003cp\u003eThe Stereo Cover for MS-RA770 is specifically designed to fit the MS-RA770 Apollo Series stereo. By using this cover, you can effectively shield the front face of your stereo from dust and debris, helping to maintain its optimal performance and appearance. The silicone construction offers a snug and secure fit, ensuring that the cover stays in place while allowing for easy removal when needed.\u003c\/p\u003e \u003cp\u003ePlease note that the Stereo Cover for MS-RA770 Apollo Series is sold inpidually, allowing you to purchase the desired quantity for your specific needs.\u003c\/p\u003e \u003cp\u003ePlease be aware that this product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit P65Warnings.ca.gov.\u003c\/p\u003e \u003cp\u003eNote: The above description is a fictional description created by ChatGPT based on the given information. It does not represent an actual product or endorsement.\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":52023062954165,"sku":"QBP335876","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1207400_qbp335876.jpg?v=1763249919"},{"product_id":"qbp958432","title":"Fusion - Stereo Cover f\/MS-SRX400 Apollo Series","description":"\u003cp\u003eIntroducing the Stereo Cover for MS-SRX400 Apollo Series, a reliable accessory designed to safeguard the front face of your Apollo stereo and keep it protected from dust and debris. Constructed with high-quality silicone material, this cover ensures durability and longevity.\u003c\/p\u003e \u003cp\u003eThe Stereo Cover for MS-SRX400 is specifically compatible with the MS-SRX400 Apollo Series stereo. By using this cover, you can effectively shield the front face of your stereo, maintaining its pristine condition and preventing dust accumulation. The silicone construction provides a snug fit, offering maximum protection while ensuring easy removal when necessary.\u003c\/p\u003e \u003cp\u003ePlease note that the Stereo Cover for MS-SRX400 Apollo Series is sold inpidually, allowing you to purchase the desired quantity for your specific needs.\u003c\/p\u003e \u003cp\u003ePlease be aware that this product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit P65Warnings.ca.gov.\u003c\/p\u003e \u003cp\u003eNote: The above description is a fictional description created by ChatGPT based on the given information. It does not represent an actual product or endorsement.\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":52023063052469,"sku":"QBP958432","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1207401_qbp958432.jpg?v=1763249920"},{"product_id":"qbp380116","title":"Blue Sea Systems PowerBar BusBar Cover, For 2104, Polycarbonate","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 2708 is a busbar cover sized for the Blue Sea Systems PowerBar 2104. It measures 8.500 x 3.375 x 2.750 inches and fits over the 2104 busbar to put a physical barrier over the connection area while keeping the assembly compact.\u003c\/p\u003e\u003cp\u003eOn a boat, this is the kind of part that helps around exposed high-current distribution points where battery cables, service tools, and nearby hardware can end up close to live studs. It is matched to the 2104 PowerBar, which uses four 3\/8-16 studs and is commonly installed in heavy DC distribution runs.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eExact fit for the Blue Sea Systems PowerBar 2104\u003c\/li\u003e\n\u003cli\u003eCovers the busbar connection area to reduce accidental contact with energized studs and attached cable lugs\u003c\/li\u003e\n\u003cli\u003e8.500 x 3.375 x 2.750 inch overall size helps you check clearance before closing up a battery or distribution space\u003c\/li\u003e\n\u003cli\u003eLow 0.10 lb weight adds protection without adding meaningful load to the installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cover is specific to the PowerBar 2104 and should be treated as a model-specific part rather than a universal busbar cover. For replacement work, the main checkpoint is the base busbar model.\u003c\/p\u003e\u003cp\u003eIt suits installations where the 2104 remains accessible after wiring is complete, such as battery banks, inverter feeds, charging circuits, and other high-amperage DC distribution points.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe cover is easiest to add once cable routing, lug placement, and final torque checks are already finished. Before closing the busbar, confirm that the mounting area has enough room for the 2.750 inch height and the full cover footprint.\u003c\/p\u003e\u003cp\u003eThis part makes the most sense for installers and boat owners who want cleaner protection around an exposed 2104 busbar in spaces that may be reached during routine service or electrical work.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023065673909,"sku":"QBP380116","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329925_qbp380116.jpg?v=1780191642"},{"product_id":"qbp913358","title":"Blue Sea Systems DualBus 100 BusBar Cover, For DualBus 2701, Polycarbonate","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 2709 is a snap-on cover for the Blue Sea Systems 2701 DualBus 100A bus bar. It measures 4-3\/16 in. long, 7\/8 in. high, and 2-1\/2 in. wide, so it matches the 2701 footprint and adds a protective layer over the terminal area without taking up much extra space.\u003c\/p\u003e\u003cp\u003eThis cover leaves wire access open while helping reduce accidental contact with the terminal studs. On boats where the bus bar sits behind a helm, inside an electrical locker, or under a console, that extra protection is useful during wiring, inspection, and routine service.\u003c\/p\u003e\u003cp\u003eThe housing is polycarbonate and the piece weighs about 0.03 lb, so it is easy to handle during installation. This is a fit-specific accessory rather than a universal cover, and the key compatibility point is the Blue Sea Systems 2701 DualBus.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade to fit the Blue Sea Systems 2701 DualBus 100A bus bar\u003c\/li\u003e\n\u003cli\u003eSnap-on design mounts over the terminal studs\u003c\/li\u003e\n\u003cli\u003eLeaves wire access open for routing and service work\u003c\/li\u003e\n\u003cli\u003eHelps reduce accidental contact around exposed bus connections\u003c\/li\u003e\n\u003cli\u003ePolycarbonate construction\u003c\/li\u003e\n\u003cli\u003eCompact size at 4-3\/16 in. x 2-1\/2 in. x 7\/8 in.\u003c\/li\u003e\n\u003cli\u003eLightweight part at about 0.03 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eUse this cover when your distribution point is a Blue Sea Systems 2701 DualBus. It is not a general bus bar shield for other stud layouts or terminal counts. In refit work, that matters because the 2701 combines positive and negative buses on one block, and this cover follows that specific layout.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe cover snaps onto the terminal studs after the bus bar has been mounted and wired. Leave enough clearance above the bus bar for the cover height and for the wire bend coming off the terminals. That keeps the cover seated properly and makes later inspection easier.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis part makes sense on boats that use a compact distribution point in a console, cabin locker, electronics space, or other protected electrical area where hands and tools may come close to the bus bar during service. It is a good match for owners and installers who want a neater finish around the 2701 and more separation around exposed terminals without changing the bus layout itself.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023065706677,"sku":"QBP913358","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329926_qbp913358.jpg?v=1780191642"},{"product_id":"qbp844794","title":"Blue Sea Systems DualBus 100 BusBar Cover, Snap-On, Polycarbonate","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 2710 is a snap-on cover for the DualBus 2702 busbar, sized to shield the terminal area while still leaving wire runs accessible. It is a small but useful finishing piece when you want the busbar installation to be safer and more protected inside a battery compartment, console, or distribution area.\u003c\/p\u003e\u003cp\u003eThis cover measures 6-3\/8 in. long, 2-3\/8 in. wide, and 7\/8 in. high, with a weight of 0.04 lb. It fits the Blue Sea Systems 2702 DualBus 100A 10-circuit busbar and adds a physical barrier over the terminal area where accidental contact is most likely during service or when gear is stored close by.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade to fit the Blue Sea Systems DualBus 2702 busbar\u003c\/li\u003e\n\u003cli\u003eSnap-on attachment at the terminal studs for a clean, straightforward fit\u003c\/li\u003e\n\u003cli\u003eOpen access around the wiring path so ring terminals and cable runs are not boxed in\u003c\/li\u003e\n\u003cli\u003ePolycarbonate construction\u003c\/li\u003e\n\u003cli\u003eCompact size at 6-3\/8 in. x 2-3\/8 in. x 7\/8 in.\u003c\/li\u003e\n\u003cli\u003eAdds protection against accidental contact at the terminal studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cover is for the 2702 DualBus 100A busbar and should be matched to that part before ordering. It is not a universal busbar cover, so the fit depends on using the correct Blue Sea Systems base unit already mounted in the boat.\u003c\/p\u003e\u003cp\u003eFor owners cleaning up a DC distribution area, this is the kind of part that helps once the busbar is already in place and wired. It suits refits and new installations where the positive and negative distribution point is mounted in a spot that may be reached during routine battery or wiring service.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward once the compatible busbar is in place. The cover snaps onto the terminal stud area and keeps the layout accessible, so you can still route and inspect connected wires without dealing with a fully enclosed housing.\u003c\/p\u003e\u003cp\u003eThis makes sense on boats where the busbar sits behind an electrical panel, inside a console, or near battery switching gear and chargers. It is a good match for owners who want a cleaner finish and an added layer of protection around an exposed distribution block.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023065739445,"sku":"QBP844794","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329927_qbp844794.jpg?v=1780191643"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/instrument-accessories.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}