{"title":"Hatch Trim \u0026 Screen Kits","description":"","products":[{"product_id":"qbp437087","title":"TACO Marine Hatch Tape, 8 ft, 3\/4 in Width, Black, Self-Adhesive Rubber","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Hatch Tape is a black self-adhesive foam seal for boat hatches, live wells, doors, lockers, and other enclosures that need a cleaner seal and less rattle. Each option comes in an 8 ft length with a 3\/4 in width, with either 1\/8 in or 1\/4 in height depending on the gap that needs to be sealed.\u003c\/p\u003e\u003cp\u003eThe tape uses medium density closed-cell foam with a flexible rubber compound, giving it the compression needed for everyday marine use around lids and access panels. It helps cushion contact points, reduce vibration noise, and limit water intrusion where the mating surfaces are suitable for adhesive tape.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBlack hatch tape for marine hatches, live wells, lockers, doors, and access enclosures.\u003c\/li\u003e\n\u003cli\u003e8 ft roll length works well for common small to midsize hatch and lid sealing jobs.\u003c\/li\u003e\n\u003cli\u003e3\/4 in width gives the tape enough surface area for a stable bond on clean, flat mounting surfaces.\u003c\/li\u003e\n\u003cli\u003eMedium density closed-cell foam helps the seal compress without soaking up water like open-cell foam.\u003c\/li\u003e\n\u003cli\u003eSelf-adhesive backing keeps installation straightforward after the surface has been cleaned and dried.\u003c\/li\u003e\n\u003cli\u003eHelps reduce hatch rattle caused by vibration from running, trailering, or dockside movement.\u003c\/li\u003e\n\u003cli\u003eFlexible rubber compound supports sealing around lightly uneven contact points on marine enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis hatch tape is offered in two black configurations. Both versions share the same 8 ft length and 3\/4 in width, while the foam height changes to suit different hatch gaps and compression needs.\u003c\/p\u003e\u003cp\u003eThe lower-profile option is useful where the lid already sits close to the frame. The taller option gives more material to compress where the gap is larger or where a more pronounced cushion is needed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV30-0744B8-2: 1\/8 x 3\/4 in, black, 8 ft length. This option suits lower-clearance hatch and enclosure gaps where a thinner sealing surface is needed.\u003c\/li\u003e\n\u003cli\u003eV30-0748B8-2: 1\/4 x 3\/4 in, black, 8 ft length. This option suits applications with a larger gap or where the lid needs more cushion between contact surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFor a better bond, remove old gasket material, adhesive residue, salt, wax, and dirt before applying the tape. The surface should be dry and clean, and the tape should be pressed firmly into place along the hatch frame or mating edge without stretching it during installation.\u003c\/p\u003e\u003cp\u003eOn tight corners, apply the tape carefully so it follows the shape of the frame without buckling. After installation, close the hatch and check that the tape compresses evenly without forcing the latch or holding the lid out of alignment.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis tape is a practical fit for owners replacing worn hatch gasket material, quieting noisy lids, or refreshing the seal around live wells and storage enclosures. It works best where the hatch surface gives the foam enough compression to seal, but still allows the lid or door to close normally.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eInspect the tape during routine washdowns and seasonal maintenance. Replace it when the foam stays flattened, pulls away from the surface, or no longer reduces movement between the lid and frame.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"1\/8 X 3\/4-Inch","offer_id":52023110271157,"sku":"QBP437087-V8","price":17.99,"currency_code":"USD","in_stock":true},{"title":"1\/4 X 3\/4-Inch","offer_id":52023110303925,"sku":"QBP437087-V9","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335382_qbp437087.jpg?v=1780191725"},{"product_id":"qbp432567","title":"Lewmar White Trim Ring \u0026 Screen Kit 367654252","description":"\u003cp\u003e\u003cstrong\u003eWhite Trim Ring \u0026amp; Screen Kit\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eTrim kits offer an easy and attractive approach to complete the installation of a hatch inside the cabin. The kits, which are manufactured of ABS plastic, include a trim piece and a hinged (and detachable) flyscreen to keep mosquitoes and other pesky insects out of the boat. The hatch latches may be accessed easily thanks to the hinged screen.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eWhite trim ring and screen kit for Lewmar hatch size 54\u003c\/li\u003e \u003cli\u003eCan only be fitted to boats with a headliner\u003c\/li\u003e \u003cli\u003eThe trim flange can be cut to length to suit a range of deck thicknesses up to 2-7\/16 in. for low\/medium profile hatches, and 2-13\/16 in. for flanged ocean hatches\u003c\/li\u003e \u003cli\u003eCan't be used on flat base ocean hatches\u003c\/li\u003e \u003c\/ul\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":52023965352117,"sku":"QBP432567","price":279.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1236166_qbp432567.jpg?v=1763261836"},{"product_id":"qbp686536","title":"GROCO 93-1250-01 Stainless Steel Replacement Screen f\/APHS-1250 - Size 1 (.077\") Perforation Diameter 93-1250-01","description":"\u003cp\u003e\u003cstrong\u003eStainless Steel Replacement Screen f\/APHS-1250 - Size 1 (.077\") Perforation Diameter\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReplacement Screen\u003c\/li\u003e \u003cli\u003eStainless Steel\u003c\/li\u003e \u003cli\u003eSize 1 (.077\") Perforation Diameter\u003c\/li\u003e \u003c\/ul\u003e","brand":"GROCO","offers":[{"title":"Default Title","offer_id":52024004739253,"sku":"QBP686536","price":30.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1240009_qbp686536.jpg?v=1763262833"},{"product_id":"qbp134176","title":"GROCO 93-1250-02 Stainless Steel Replacement Screen f\/APHS-1250 - Size 2 (.125\") Perforation Diameter 93-1250-02","description":"\u003cp\u003e\u003cstrong\u003eStainless Steel Replacement Screen f\/APHS-1250 - Size 2 (.125\") Perforation Diameter\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReplacement Screen\u003c\/li\u003e \u003cli\u003eStainless Steel\u003c\/li\u003e \u003cli\u003eSize 2 (.125\") Perforation Diameter\u003c\/li\u003e \u003c\/ul\u003e","brand":"GROCO","offers":[{"title":"Default Title","offer_id":52024004772021,"sku":"QBP134176","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1240010_qbp134176.jpg?v=1763262834"},{"product_id":"qbp429478","title":"GROCO 93-1250-03 Stainless Steel Replacement Screen f\/APHS-1250 - Size 3 (.188\") Perforation Diameter 93-1250-03","description":"\u003cp\u003e\u003cstrong\u003eStainless Steel Replacement Screen f\/APHS-1250 - Size 3 (.188\") Perforation Diameter\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReplacement Screen\u003c\/li\u003e \u003cli\u003eStainless Steel\u003c\/li\u003e \u003cli\u003eSize 3 (.188\") Perforation Diameter\u003c\/li\u003e \u003c\/ul\u003e","brand":"GROCO","offers":[{"title":"Default Title","offer_id":52024004804789,"sku":"QBP429478","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1240011_qbp429478.jpg?v=1763262835"},{"product_id":"qbp589164","title":"GROCO 93-2000-01 Stainless Steel Replacement Screen f\/APHS-2000 - Size 1 (.077\") Perforation Diameter 93-2000-01","description":"\u003cp\u003e\u003cstrong\u003eStainless Steel Replacement Screen f\/APHS-2000 - Size 1 (.077\") Perforation Diameter\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReplacement Screen\u003c\/li\u003e \u003cli\u003eStainless Steel\u003c\/li\u003e \u003cli\u003eSize 1 (.077\") Perforation Diameter\u003c\/li\u003e \u003c\/ul\u003e","brand":"GROCO","offers":[{"title":"Default Title","offer_id":52024004837557,"sku":"QBP589164","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1240013_qbp589164.jpg?v=1763262836"},{"product_id":"qbp344262","title":"GROCO 93-2000-02 Stainless Steel Replacement Screen f\/APHS-2000 - Size 2 (.125\") Perforation Diameter 93-2000-02","description":"\u003cp\u003e\u003cstrong\u003eStainless Steel Replacement Screen f\/APHS-2000 - Size 2 (.125\") Perforation Diameter\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReplacement Screen\u003c\/li\u003e \u003cli\u003eStainless Steel\u003c\/li\u003e \u003cli\u003eSize 2 (.125\") Perforation Diameter\u003c\/li\u003e \u003c\/ul\u003e","brand":"GROCO","offers":[{"title":"Default Title","offer_id":52024004870325,"sku":"QBP344262","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1240014_qbp344262.jpg?v=1763262837"},{"product_id":"qbp742437","title":"GROCO 93-2000-03 Stainless Steel Replacement Screen f\/APHS-2000 - Size 3 (.188\") Perforation Diameter 93-2000-03","description":"\u003cp\u003e\u003cstrong\u003eStainless Steel Replacement Screen f\/APHS-2000 - Size 3 (.188\") Perforation Diameter\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReplacement Screen\u003c\/li\u003e \u003cli\u003eStainless Steel\u003c\/li\u003e \u003cli\u003eSize 3 (.188\") Perforation Diameter\u003c\/li\u003e \u003c\/ul\u003e","brand":"GROCO","offers":[{"title":"Default Title","offer_id":52024004903093,"sku":"QBP742437","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1240015_qbp742437.jpg?v=1763262838"},{"product_id":"qbp335941","title":"GROCO 93-3000-01 Stainless Steel Replacement Screen f\/APHS-3000 - Size 1 (.077\") Perforation Diameter 93-3000-01","description":"\u003cp\u003e\u003cstrong\u003eStainless Steel Replacement Screen f\/APHS-3000 - Size 1 (.077\") Perforation Diameter\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReplacement Screen\u003c\/li\u003e \u003cli\u003eStainless Steel\u003c\/li\u003e \u003cli\u003eSize 1 (.077\") Perforation Diameter\u003c\/li\u003e \u003c\/ul\u003e","brand":"GROCO","offers":[{"title":"Default Title","offer_id":52024004968629,"sku":"QBP335941","price":73.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1240017_qbp335941.jpg?v=1763262840"},{"product_id":"qbp667531","title":"GROCO 93-3000-02 Stainless Steel Replacement Screen f\/APHS-3000 - Size 2 (.125\") Perforation Diameter 93-3000-02","description":"\u003cp\u003e\u003cstrong\u003eStainless Steel Replacement Screen f\/APHS-3000 - Size 2 (.125\") Perforation Diameter\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReplacement Screen\u003c\/li\u003e \u003cli\u003eStainless Steel\u003c\/li\u003e \u003cli\u003eSize 2 (.125\") Perforation Diameter\u003c\/li\u003e \u003c\/ul\u003e","brand":"GROCO","offers":[{"title":"Default Title","offer_id":52024005001397,"sku":"QBP667531","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1240018_qbp667531.jpg?v=1763262841"},{"product_id":"qbp752562","title":"GROCO 93-3000-03 Stainless Steel Replacement Screen f\/APHS-3000 - Size 3 (.188\") Perforation Diameter 93-3000-03","description":"\u003cp\u003e\u003cstrong\u003eStainless Steel Replacement Screen f\/APHS-3000 - Size 3 (.188\") Perforation Diameter\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReplacement Screen\u003c\/li\u003e \u003cli\u003eStainless Steel\u003c\/li\u003e \u003cli\u003eSize 3 (.188\") Perforation Diameter\u003c\/li\u003e \u003c\/ul\u003e","brand":"GROCO","offers":[{"title":"Default Title","offer_id":52024005034165,"sku":"QBP752562","price":73.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1240019_qbp752562.jpg?v=1763262842"},{"product_id":"qbp436025","title":"TACO Marine Flex Trim, 1\/4 in Opening, 1\/2 in W, Flexible PVC","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V30-1008 is a 1\/4 inch opening x 1\/2 inch flex trim made for finishing exposed edges on boats, hatches, panels, lockers, consoles, and other areas where a clean edge matters. It uses flexible PVC construction, so it can follow curved surfaces and tight contours without needing a rigid molded part.\u003c\/p\u003e\u003cp\u003eInside the trim, individual aluminum clips and a gripping tongue help the profile hold onto the edge once installed. That makes it useful for refit work, OEM-style finishing, and replacing worn trim where the edge material matches the 1\/4 inch opening.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1\/4 inch opening with a 1\/2 inch outside profile for finishing compatible panel and edge thicknesses.\u003c\/li\u003e\n\u003cli\u003eFlexible PVC body follows curved edges, radius corners, and irregular boat surfaces more easily than rigid trim.\u003c\/li\u003e\n\u003cli\u003eIntegrated interior aluminum clips and gripping tongue help the trim stay seated on the edge.\u003c\/li\u003e\n\u003cli\u003eCovers unfinished edges for a cleaner look and helps reduce exposed sharp or rough surfaces in the cockpit, cabin, hatch, or storage areas.\u003c\/li\u003e\n\u003cli\u003eAvailable in black or white finishes and in 25 ft or 250 ft lengths depending on the selected variant.\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis flex trim is offered in multiple configurations so the same profile can be matched to different trim runs and finish colors.\u003c\/p\u003e\u003cp\u003eThe opening size and profile stay centered on the same 1\/4 inch x 1\/2 inch flex trim format, while the available variants change by length and color.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV30-1008B25-1: 25 ft length, black. This option suits shorter repair runs, cockpit edges, console openings, and dark trim areas where a black edge finish matches the surrounding hardware or upholstery.\u003c\/li\u003e\n\u003cli\u003eV30-1008W250: 250 ft length, white. This longer white roll is useful for larger refit jobs, production work, or multiple trim runs where a consistent light finish is needed across the boat.\u003c\/li\u003e\n\u003cli\u003eV30-1008W25-1: 25 ft length, white. This option works well for smaller repairs and localized finishing where white trim matches gelcoat, interior panels, or hatch surrounds.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eCheck the thickness of the edge before installation and confirm it suits the 1\/4 inch opening. The trim should press over the edge with even contact along the run, and the flexible body makes it easier to work around curves than a rigid extrusion.\u003c\/p\u003e\u003cp\u003eFor best results, clean the mounting edge before fitting the trim and test the route before final placement. On long runs, take time around corners and radius sections so the profile sits evenly without twisting.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis trim is a practical match for boat owners, yards, and builders who need a neat finish on exposed fiberglass, plastic, or panel edges. Common uses include hatch openings, cockpit storage areas, cabin panels, helm consoles, and other areas where an unfinished edge would look rough or feel sharp.\u003c\/p\u003e\u003cp\u003eThe color and roll length make the main difference when planning the job: 25 ft is convenient for repairs and single-area projects, while 250 ft is better suited to larger work where the same trim profile is used repeatedly.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"25’ \/ Black","offer_id":52581861458101,"sku":"QBP436025-V0","price":87.99,"currency_code":"USD","in_stock":false},{"title":"250’ \/ White","offer_id":52581861490869,"sku":"QBP436025-V2","price":0.0,"currency_code":"USD","in_stock":false},{"title":"25’ \/ White","offer_id":52581861523637,"sku":"QBP436025-V1","price":87.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335516_qbp436025.webp?v=1780200825"},{"product_id":"qbp731303","title":"TACO Marine Flex Trim, 1\/2 in Opening, 5\/8 in Width, 25 ft","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine 1\/2\" Opening x 5\/8\" Flex Trim is a flexible PVC edge trim for finishing exposed material edges on boats while following curves, corners, and radius changes without a rigid molding layout. It is sized with a 1\/2\" opening and 5\/8\" width, making it useful where a clean protective edge is needed on panels, hatches, bulkheads, cabinets, cockpit areas, and other interior or exterior trim runs.\u003c\/p\u003e\u003cp\u003eThis Flex Trim uses individual internal aluminum clips with a gripping tongue to help it hold to the edge once pressed into place. The 25' length gives installers room to cover longer runs or cut shorter sections for refit work, repairs, and new trim installations around uneven or unfinished edges.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlexible PVC trim covers unfinished edges and follows almost any contour or radius.\u003c\/li\u003e\n\u003cli\u003e1\/2\" opening and 5\/8\" width support fitment on compatible material edges where this profile is required.\u003c\/li\u003e\n\u003cli\u003eIntegrated internal aluminum clips and a gripping tongue help the trim stay seated on the edge.\u003c\/li\u003e\n\u003cli\u003e25' length suits longer trim runs and can be cut to fit shorter sections during installation.\u003c\/li\u003e\n\u003cli\u003eAvailable in black or white textured finishes to match common boat interior and exterior trim schemes.\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Flex Trim is offered in two color configurations for the same 1\/2\" opening x 5\/8\" profile.\u003c\/p\u003e\u003cp\u003eThe color changes between variants, while the 25' length and profile size remain the same across both options.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV30-1316B25-1: Black. This finish works well where the trim needs to blend with dark panels, rub rail details, cockpit accents, or black hardware nearby.\u003c\/li\u003e\n\u003cli\u003eV30-1316W25-1: White. This finish suits light gelcoat, cabin panels, hatches, and other areas where a white trim edge gives the installation a cleaner visual finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore installation, the edge should be checked against the 1\/2\" opening so the trim can grip properly without forcing the profile onto material that is too thick. For a neat result, dry-fit the trim around the run first, especially on curved corners, hatch openings, and panel edges where the radius changes.\u003c\/p\u003e\u003cp\u003eThe trim can be cut to length for the job, which makes it practical for both new boat projects and refits where old or worn edge covering needs to be replaced. A clean cut at the end of the run helps the finished edge look intentional rather than patched.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis trim is a good match for boat owners, builders, and refit crews who need a flexible edge finish rather than a rigid straight molding. It is especially useful around cockpit coamings, transom trim areas, bulkheads, cabin cabinetry, hatch openings, and other places where an exposed edge needs a cleaner look and a more protected feel.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Black","offer_id":52581949898933,"sku":"QBP731303-V1","price":98.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":52581949931701,"sku":"QBP731303-V2","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335521_qbp731303.webp?v=1780201664"},{"product_id":"qbp731304","title":"TACO Marine Flex Trim, 5\/32 in Opening, 9\/16 in Depth, Flexible PVC, Aluminum Clips","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine 5\/32’’ Opening x 9\/16’’ Flex Trim is a flexible PVC edge trim for covering unfinished edges on boat panels, hatches, lockers, consoles, and other trim locations where a clean finished edge is needed. Its 5\/32’’ opening and 9\/16’’ profile make it useful for narrow edge finishing, especially where the trim needs to follow curves or tighter radiuses rather than a straight run only.\u003c\/p\u003e\u003cp\u003eThis flex trim uses individual internal aluminum clips with a gripping tongue, helping the trim hold its position on the edge after installation. It is a practical detail part for refinishing worn edges, protecting exposed panel cuts, or giving new fabrication work a finished look in cockpit, cabin, deck, or storage areas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlexible PVC body helps the trim follow curves, contours, and radiuses around marine panels and openings.\u003c\/li\u003e\n\u003cli\u003e5\/32’’ opening fits narrow unfinished edges where a low-profile finishing trim is needed.\u003c\/li\u003e\n\u003cli\u003e9\/16’’ trim profile gives visible edge coverage without adding a bulky look to the installation.\u003c\/li\u003e\n\u003cli\u003eIntegrated internal aluminum clips and gripping tongue help the trim stay seated on the edge.\u003c\/li\u003e\n\u003cli\u003eAvailable in black or white to coordinate with common boat interiors, exterior trim areas, and panel colors.\u003c\/li\u003e\n\u003cli\u003eOffered in 25’ and 250’ lengths for small repairs, refits, and longer production-style installations.\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis flex trim is offered in multiple configurations based on length and color. The trim size, flexible PVC construction, internal aluminum clips, and gripping tongue are consistent across the listed configurations.\u003c\/p\u003e\u003cp\u003eThe 25’ lengths suit smaller repair jobs, hatch openings, console edges, and short trim runs. The 250’ lengths are better suited to larger refits, multiple boats, or shops that need continuous inventory for repeated installations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV30-1005B250: 250’ length in black. This option suits longer black trim runs or shop use where multiple edge-finishing jobs are expected.\u003c\/li\u003e\n\u003cli\u003eV30-1005B25-1: 25’ length in black. This option works well for smaller black trim repairs, single-panel projects, or localized edge finishing.\u003c\/li\u003e\n\u003cli\u003eV30-1005W250: 250’ length in white. This option suits longer white trim runs where the finished edge needs to blend with lighter panels or deck areas.\u003c\/li\u003e\n\u003cli\u003eV30-1005W25-1: 25’ length in white. This option is a good match for smaller white trim repairs, hatch edges, locker openings, or short fabrication runs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore installation, the edge should be clean, dry, and free of loose material so the gripping tongue can seat evenly. The trim can be worked around curves by hand, making it useful for boat areas where a rigid molding would be difficult to fit neatly.\u003c\/p\u003e\u003cp\u003eCheck the edge thickness against the 5\/32’’ opening before ordering. This is especially important on fiberglass panels, liner cuts, hatch lids, and custom fabricated parts where thickness can vary from one section to another.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis trim is a good fit for owners, refit shops, and builders who need to finish exposed edges without adding a large molding profile. It can be used during cosmetic refresh work, minor repairs, or new panel installations where the edge needs protection and a cleaner appearance.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eFor routine care, wash the trim with mild boat soap and fresh water as part of normal deck or cabin cleaning. Avoid harsh solvents near the PVC surface, and inspect long runs occasionally to confirm the trim remains fully seated after vibration, repeated use, or seasonal service work.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"250’ \/ Black","offer_id":52581949964469,"sku":"QBP731304-V1","price":0.0,"currency_code":"USD","in_stock":false},{"title":"25’ \/ Black","offer_id":52581949997237,"sku":"QBP731304-V2","price":87.99,"currency_code":"USD","in_stock":true},{"title":"250’ \/ White","offer_id":52581950030005,"sku":"QBP731304-V3","price":0.0,"currency_code":"USD","in_stock":false},{"title":"25’ \/ White","offer_id":52581950062773,"sku":"QBP731304-V4","price":87.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335525_qbp731304.jpg?v=1780201667"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/hatch-trim-screen-kits.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}