{"title":"Fuel Vents \u0026 Fills","description":"","products":[{"product_id":"qbp169037","title":"Perko Chromalex Locking Gas Fill, 1-1\/2 in Hose, Chrome-Plated Zinc Alloy","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 1399DP0CHR is a locking gas deck fill for boats using 1-1\/2\" fuel fill hose. It has a 3-1\/8\" outside flange diameter, a 1-7\/8\" neck length, and installs in a 2-1\/8\" mounting hole, so it is straightforward to compare against an existing fill before ordering.\u003c\/p\u003e\u003cp\u003eThis fill uses a chrome-plated zinc alloy body with a black polymer flange and cap. The cap is tethered with a strap, and the lock has a cover over the keyhole, which helps keep the opening cleaner when the fill is exposed on deck.\u003c\/p\u003e\u003cp\u003eIt also includes a ground screw, cap retainer, and gasket at the fill. This model meets U.S.C.G. Safety Standards dated January 31, 1977 for gasoline fuel systems under 33 CFR 183, and it is not the right fill for installations that require 40 CFR 1060 subpart B evaporative-emissions compliance.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 1-1\/2\" gasoline fill hose, which is a common size on many older and current boat fuel-fill layouts\u003c\/li\u003e\n\u003cli\u003e3-1\/8\" flange diameter and 2-1\/8\" mounting hole size make replacement checks easier before cutting or drilling\u003c\/li\u003e\n\u003cli\u003e1-7\/8\" neck length helps when you need to confirm clearance below the deck\u003c\/li\u003e\n\u003cli\u003eChrome-plated zinc alloy body with black polymer flange and cap balances a traditional deck-fill look with practical corrosion resistance\u003c\/li\u003e\n\u003cli\u003eLocking cap includes a cover over the keyhole and a cap strap to keep the cap attached to the fill\u003c\/li\u003e\n\u003cli\u003eGround screw, cap retainer, and gasket are part of the fill assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis fill suits gasoline systems that use 1-1\/2\" hose and need a deck fill with a locking cap. The main fit checks are the hose size, the 2-1\/8\" mounting hole, the 3-1\/8\" flange footprint, and the 1-7\/8\" neck length under the deck. The mounting pattern uses #6 screws, so the existing fastener layout is worth checking during a replacement.\u003c\/p\u003e\u003cp\u003eIt is a good match for boat owners replacing an older Perko-style gas fill or updating a deck fill where security matters at the dock, on a trailer, or in shared storage. On boats that already have an evaporative-emissions compliant fuel system requirement, this is not the correct fill to substitute in.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFor a clean replacement, compare the hose inside diameter, deck cutout, and underside clearance before removing the old fill. The grounding point should be connected as required by the boat's fuel-system layout, and the gasket should be seated evenly so the flange beds down flat against the deck surface.\u003c\/p\u003e\u003cp\u003eThis style of fill makes the most sense where you want a familiar twist-cap layout with a lock, clear gas marking, and a compact neck that does not take up much space below deck.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":52023082516661,"sku":"QBP169037","price":84.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330354_qbp169037.webp?v=1780191684"},{"product_id":"qbp330069","title":"Perko Locking Fuel Fill Insert, For 1-1\/2 in Vented Fills, Black Polymer, Zinc Alloy Lock Cylinder","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 0525DP0BLK is a locking insert for Perko 1-1\/2 inch vented fuel fills. It sits inside the fill neck and adds keyed access without replacing the full deck fill, using a black polymer body with a zinc alloy lock cylinder.\u003c\/p\u003e\u003cp\u003eThis insert is made for compatible Perko vented fills and works with the same key used to open the fill cap, which keeps fueling simple when you are topping off at the dock or fueling from a trailer. It is intended for Perko fill models 0540, 0541, 0580, 0581, 0582, 0583, 0590, 0591, and 1318, and it is not for EPA-compliant gas fills with vacuum pressure relief valves.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits most Perko 1-1\/2 inch vented fills, with direct compatibility for models 0540, 0541, 0580, 0581, 0582, 0583, 0590, 0591, and 1318\u003c\/li\u003e\n\u003cli\u003eBlack polymer insert with a zinc alloy lock cylinder\u003c\/li\u003e\n\u003cli\u003eDual-purpose key opens the fill cap and releases the locking insert\u003c\/li\u003e\n\u003cli\u003eRetrofit style insert that works with the existing compatible vented fill instead of replacing the deck fitting\u003c\/li\u003e\n\u003cli\u003eNot for use with Perko EPA-compliant gas fills that use a vacuum pressure relief valve system, including figures 0660, 0661, 0662, 0663, 0780, 0781, 0782, 0783, 0790, and 0791\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis part matters most by fill model, not by boat brand. It is a fit item for Perko vented fuel fills with a 1-1\/2 inch fill size, so it should be checked against the figure number already installed on the deck fill before ordering.\u003c\/p\u003e\u003cp\u003eIt can also be used on Perko 0542 and 0543 fills when the plastic cap retainer system is removed. This makes sense for owners who already have a compatible Perko vented fill in place and want keyed control at the fill opening without changing the whole assembly.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe insert presses into the throat of a compatible fill and locks against the hose bib when fully seated. On Perko 0540 through 0591 fills, the tab at the top of the insert should align with the vent opening notch so the insert does not rotate during removal.\u003c\/p\u003e\u003cp\u003eTo remove it for fueling, the key is turned counterclockwise 90 degrees, which retracts the locking cams so the insert can be pulled out by the key. On older fills, the top of the fill neck needs a smooth transition inside the opening for the insert to seat and come back out cleanly.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":52023082549429,"sku":"QBP330069","price":52.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330356_qbp330069.webp?v=1780191684"},{"product_id":"qbp506839","title":"Perko 1324 Fuel System Locking Cap, For 1-1\/2 in Non-Vented Fills","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 1324 is a fuel system locking cap for 1-1\/2\" non-vented fills, used as a replacement cap on compatible Perko deck fills. It is made from black polymer with a gasket, and it has a built-in lock cylinder with a cover over the key hole to help keep the fuel fill closed off when the boat is unattended.\u003c\/p\u003e\u003cp\u003eThis cap is meant for pre-EPA fuel fill applications and should be matched by both fill series and cap outside thread diameter before ordering. The two available fit sizes cover different Perko fill models, with outside thread diameters of 1-15\/32\" or 1-7\/8\" depending on the variant.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for 1-1\/2\" non-vented fuel fills on compatible Perko deck fills.\u003c\/li\u003e\n\u003cli\u003eBlack polymer cap with a gasket to help maintain the seal at the fuel fill opening.\u003c\/li\u003e\n\u003cli\u003eBuilt-in lock cylinder with a cover for the key hole to limit access to the fuel fill cap.\u003c\/li\u003e\n\u003cli\u003eTwo fit sizes cover specific Perko fill families, so the cap can be matched to the existing deck fill rather than selected by appearance alone.\u003c\/li\u003e\n\u003cli\u003eCannot be keyed alike, which keeps each cap keyed separately for security.\u003c\/li\u003e\n\u003cli\u003eFor pre-EPA use only, so it should be checked against the vessel’s existing fuel fill and emissions setup before replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis fuel system locking cap is offered in two configurations, each tied to a specific Perko fill fitment group and cap outside thread diameter.\u003c\/p\u003e\u003cp\u003eBoth variants use black polymer construction with a gasket and a built-in lock cylinder with a key hole cover. The fit size, compatible Perko fill numbers, and outside thread diameter are the key differences to confirm before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1324DP0BLK: Locking Cap Black, Size #0, for Perko fills 1313 and 1399, with a 1-15\/32\" outside thread diameter. This version suits boats using those listed Perko non-vented fills and should be matched to the existing cap thread size.\u003c\/li\u003e\n\u003cli\u003e1324DP1BLK: Locking Cap Chrome, Size #1, for Perko fills 0520, 0527, 0528, 0557, 0599, and 1270, with a 1-7\/8\" outside thread diameter. This version fits the larger listed Perko fill group and is the correct match when the existing fill uses the Size #1 cap thread.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFuel fill caps are fit-sensitive parts. Before replacing a missing or worn cap, confirm the Perko fill number on the boat or compare the existing cap thread diameter to the variant information above. A cap that looks similar may not seal or thread correctly if the fill series or thread diameter is different.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis locking cap is a practical replacement for boats kept at marinas, on trailers, or in shared storage areas where the fuel fill needs a simple lockable closure. It is also useful during refits when the original Perko cap is missing, worn, or no longer locking properly, as long as the deck fill and pre-EPA application match the cap specification.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Black","offer_id":52023138582709,"sku":"QBP506839-V3","price":52.22,"currency_code":"USD","in_stock":true},{"title":"Chrome","offer_id":52023138615477,"sku":"QBP506839-V6","price":57.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1334631_qbp506839.webp?v=1780191774"},{"product_id":"qbp506889","title":"Perko 0795 Replacement Vented Flip Top Cap, For 1-1\/2 in Hose, Polymer, Flame Arrestor","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 0795 is a replacement vented flip top cap for Perko vented fills that use 1-1\/2\" hose. It is made from polymer, mounts at the gunnel without removing the fill body, and requires a 5-1\/4\" diameter mounting surface with #8 screws.\u003c\/p\u003e\u003cp\u003eThe cap combines fill access and tank venting in one top assembly, with an integral tank vent, flame arrestor, and anti-surge valve. It accepts metallic inserts for gas, diesel, or water fills, so the fill point can be clearly identified without adding a separate deck plate key or ground wire.\u003c\/p\u003e\u003cp\u003eThis Figure 0795 cap is for Perko vented fill models 0540, 0541, 0542, 0543, 0580, 0581, 0582, 0583, 0590, and 0591. It is not a replacement for ratcheting or EPA-style fuel caps.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement flip top cap for compatible Perko vented fills with 1-1\/2\" hose\u003c\/li\u003e\n\u003cli\u003ePolymer construction offered in black or white product color\u003c\/li\u003e\n\u003cli\u003eMounts directly on the gunnel without removing the existing fill body\u003c\/li\u003e\n\u003cli\u003eIntegral tank vent with flame arrestor and anti-surge valve\u003c\/li\u003e\n\u003cli\u003eIncludes metallic inserts for gas, diesel, or water fill identification\u003c\/li\u003e\n\u003cli\u003eNo deck plate key or ground wire required\u003c\/li\u003e\n\u003cli\u003eRequires a 5-1\/4\" diameter mounting surface and #8 screw size\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis replacement cap is offered in two color configurations for matching the fill area, deck hardware, or surrounding gelcoat.\u003c\/p\u003e\u003cp\u003eThe hose size, mounting requirements, flip top format, and Perko vented-fill compatibility are the same across both variants.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0795DP0BLK, product color black. The black color gives the fill point a darker look that can blend with black deck hardware or darker trim.\u003c\/li\u003e\n\u003cli\u003e0795DP0WHT, product color white. The white color suits installations where the fill sits near white gelcoat or light deck fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFor fit confirmation, the existing fill should match one of the supported Perko vented fill figure numbers and use a 1-1\/2\" hose connection. Since this cap is not for ratcheting or EPA-style fuel caps, it works best as a like-for-like replacement on the listed Perko vented fills.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe direct gunnel mounting format helps when the fill body is staying in place and only the cap assembly needs replacement. After installation, the correct metallic insert should be used for the vessel system so gas, diesel, or water fills are not confused during refueling or dockside service.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Black","offer_id":52023138713781,"sku":"QBP506889-V2","price":45.64,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":52023138746549,"sku":"QBP506889-V0","price":45.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1334591_qbp506889.webp?v=1780191774"},{"product_id":"qbp225037","title":"Scandvik - White Container \u0026 Cap - For Scandvik 10055, 10275, 10298, \u0026 10826","description":"\u003ch4\u003eDive into the Details: White Container \u0026amp; Cap Replacement\u003c\/h4\u003e \u003cp\u003eIf you are looking for a perfect substitute for your horizontally mounted recessed showers, you've landed in the right place. These replacements aren't just any cap and cup; they are specifically designed to fit certain Scandvik part numbers seamlessly.\u003c\/p\u003e \u003ch4\u003eSpecs that Speak\u003c\/h4\u003e \u003cp\u003ePrimarily, this model serves as a kit containing one cap (#10252) and one cup (#10253). It's tailored for horizontally mounted showers, which are identifiable by the shower depicted on the cap.\u003c\/p\u003e \u003ch4\u003eDid You Know?\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eFor pull-out shower\/sprayer handles, the ideal cups to use are #10253 (white) or #10264 (black). Couple these with either a white cap #10252 or its counterpart, the black cap #10263.\u003c\/li\u003e \u003cli\u003eOn the other hand, mixer valves are best suited with the white cup #10335, harmonizing perfectly with the white cap, #10252.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eColor \u0026amp; Design Finishes\u003c\/h4\u003e \u003cp\u003eThe pristine white color of both the container and cap gives it a sleek and modern look, ensuring it complements most bathroom decors effortlessly.\u003c\/p\u003e \u003ch4\u003eHighlights to Heed\u003c\/h4\u003e \u003cp\u003eThe uniqueness of this product isn't just in its color or design but also in its compatibility with a range of Scandvik parts. Plus, a small detail to remember: the \"P\" within the part number hints at retail packaging, making it easier for you to identify when shopping.\u003c\/p\u003e","brand":"SCANDVIK","offers":[{"title":"Default Title","offer_id":52023186817205,"sku":"QBP225037","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1211471_qbp225037.jpg?v=1763251970"},{"product_id":"qbp180444","title":"Scandvik - White Vertical Cup \u0026 Cap - For Scandvik PN 1075","description":"\u003ch4\u003eIntroducing the White Vertical Enhancement Kit!\u003c\/h4\u003e \u003cp\u003eFor those seeking an optimal replacement for their vertically mounted recessed showers, look no further. This kit offers both a cap and a cup designed to integrate seamlessly with your marine setup.\u003c\/p\u003e \u003ch4\u003eThe Nitty-Gritty Details\u003c\/h4\u003e \u003cp\u003eThis kit has been crafted with precision, ensuring it aligns perfectly with Scandvik parts. Designed with features to assist in quick identification and ensure the right fit.\u003c\/p\u003e \u003ch4\u003eHow Big Is It?\u003c\/h4\u003e \u003cp\u003eFor those keen on exact measurements, the mounting hole required for this piece is 2-1\/4 in.\u003c\/p\u003e \u003ch4\u003eSpot The Difference: Recognizing The Vertical Mount\u003c\/h4\u003e \u003cp\u003eIdentifying the vertically mounted unit is straightforward. One can spot the distinct Scandvik logo on the cap, symbolizing its authenticity and alignment with Scandvik's quality promise.\u003c\/p\u003e \u003ch4\u003eKey Takeaways\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eDesigned explicitly for vertically mounted recessed showers.\u003c\/li\u003e \u003cli\u003eDistinct Scandvik logo for easy identification.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eWhat’s In The Kit?\u003c\/h4\u003e \u003cp\u003eThis kit proudly offers one #10030 cap and one #10031 cup. Together, they form the ideal solution for those looking to replace or upgrade their marine shower setup.\u003c\/p\u003e","brand":"SCANDVIK","offers":[{"title":"Default Title","offer_id":52023186849973,"sku":"QBP180444","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1211472_qbp180444.jpg?v=1763251971"},{"product_id":"qbp909970","title":"Scandvik - Black Cap \u0026 Container - For Scandvik Recessed Shower","description":"\u003ch4\u003eDiscover the Elegance: Black Cap \u0026amp; Container for Scandvik Recessed Shower\u003c\/h4\u003e \u003cp\u003eIntroducing a touch of sophistication to your marine bathroom with the Black Cap \u0026amp; Container for the Scandvik Recessed Shower. This meticulously designed replacement cap and cup set not only promises to elevate the aesthetic appeal of your shower space but also ensures its functionality remains top-notch. Ideal for horizontally mounted recessed showers, this duo blends seamlessly into any design scheme, offering a sleek finish that's both visually appealing and operationally efficient.\u003c\/p\u003e \u003ch4\u003eSophisticated Features for a Refined Look\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eAdorned with a signature shower symbol on the cap for easy identification and a touch of elegance.\u003c\/li\u003e \u003cli\u003eA harmonizing black design across both cap and cup, providing a cohesive and sophisticated appearance.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eMasterful Specifications for Seamless Integration\u003c\/h4\u003e \u003cp\u003eOptimal Mounting Hole Size: 2-1\/4 inches, crafted to ensure a perfect fit for Scandvik recessed showers, simplifying installation while maximizing style and utility.\u003c\/p\u003e \u003ch4\u003eKey Highlights: Elegance Meets Functionality\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eA consistent black theme across the cap and cup, enhancing visual harmony and adding a modern twist to your shower setup.\u003c\/li\u003e \u003cli\u003eThe intuitive shower symbol on the cap serves as a quick identifier, merging practicality with design finesse.\u003c\/li\u003e \u003cli\u003eEspecially suited for horizontally mounted recessed showers, making it a versatile addition to your marine bathroom.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eChoose the Black Cap \u0026amp; Container for your Scandvik Recessed Shower to infuse your marine shower space with an air of elegance and sophistication. This set is not just a replacement; it's an upgrade that reaffirms your commitment to style, functionality, and the seamless integration of both. With its sleek design and intuitive features, it stands as a testament to the thoughtful consideration of both aesthetics and utility in the marine environment.\u003c\/p\u003e","brand":"SCANDVIK","offers":[{"title":"Default Title","offer_id":52023187374261,"sku":"QBP909970","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1211493_qbp909970.jpg?v=1763251983"},{"product_id":"qbp438747","title":"Sea-Dog - Flush Mount Gas Tank Vent 5\/8\" Hose - Straight, Stainless Steel","description":"\u003ch4\u003eThe Sea-Dog Stainless Steel Flush Mount Gas Tank Vent\u003c\/h4\u003e \u003cp\u003eEnsure proper fuel flow and prevent unwanted issues on your next boating adventure with the Sea-Dog Stainless Steel Flush Mount Gas Tank Vent. This essential piece of marine equipment plays a crucial role in maintaining your boat's fuel system health and safety.\u003c\/p\u003e \u003ch4\u003eEnsuring Smooth Fuel Flow and Safety\u003c\/h4\u003e \u003cp\u003eThe Sea-Dog Gas Tank Vent allows air to enter the fuel tank as fuel is consumed or as temperatures fluctuate. This prevents a vacuum from forming within the tank, which can hinder fuel flow and engine performance. Additionally, it acts as a pressure release valve, safeguarding against excessive pressure buildup. This dual functionality helps prevent fuel spills, potential blow-back occurrences, and ensures fumes are vented safely outside the boat, creating a more comfortable and hazard-free boating experience.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMaintains proper air circulation for smooth fuel flow and engine performance.\u003c\/li\u003e \u003cli\u003ePrevents vacuum build-up and excessive pressure, safeguarding against fuel spills and blow-back.\u003c\/li\u003e \u003cli\u003eVents fumes outboard, keeping the boat's interior free of harmful fumes.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eSimple Installation and Lasting Durability\u003c\/h4\u003e \u003cp\u003eThe Sea-Dog Flush Mount Gas Tank Vent features a straightforward design for easy installation. Its compact size allows for placement in various suitable locations on your boat. Additionally, the vent is constructed from investment cast 316 stainless steel, renowned for its exceptional resistance to corrosion, salt spray, and UV rays. This ensures long-lasting performance and reliability even in harsh marine environments.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCompact design facilitates easy installation in various locations.\u003c\/li\u003e \u003cli\u003eCrafted from investment cast 316 stainless steel for superior corrosion resistance and durability.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Specifications\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eMaterial: Investment cast 316 stainless steel\u003c\/li\u003e \u003cli\u003eConnection: 5\/8\" hose barb\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eHighlights\u003c\/h4\u003e \u003cp\u003eThe Sea-Dog Stainless Steel Flush Mount Gas Tank Vent offers several benefits for boat owners, including:\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePromotes proper fuel flow and engine performance.\u003c\/li\u003e \u003cli\u003eHelps prevent fuel spills and blow-back occurrences.\u003c\/li\u003e \u003cli\u003eVents fumes safely outside the boat, enhancing comfort and safety.\u003c\/li\u003e \u003cli\u003eEasy to install and built with durable, corrosion-resistant materials.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eBy ensuring proper ventilation and safeguarding your boat's fuel system, the Sea-Dog Stainless Steel Flush Mount Gas Tank Vent contributes to a smooth, safe, and enjoyable boating experience.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":52023379919029,"sku":"QBP438747","price":47.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1215013_qbp438747.jpg?v=1763253969"},{"product_id":"qbp770272","title":"Attwood Marine Oval Navigation Light Base, For Angled Pole Lights, 2-Pin, 7.5 Degree Angle, Black Housing","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 91022-7 is an oval 2-pin base for angled pole lights with locking collars. It mounts in tight spots such as narrow gunwales and deck sections, and it sets the pole at a 7.5 degree angle. The black polymer housing measures 1-11\/16 inch wide by 2-5\/8 inch high, so it fits where a larger base can be awkward.\u003c\/p\u003e\u003cp\u003eThis base is built for everyday marine exposure. The socket is covered by soft rubber with a molded-in gasket to help keep moisture and debris out when the pole light is removed, while nickel-plated contacts, multi-crimped connections, and tinned wire leads help the electrical side hold up better around spray, washdowns, and vibration.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOval 2-pin base for angled Attwood pole lights that use a locking collar\u003c\/li\u003e\n\u003cli\u003e7.5 degree socket angle suits narrow gunwales and deck mounting areas\u003c\/li\u003e\n\u003cli\u003eSoft rubber cover with a molded-in gasket helps keep the socket cleaner and drier when the light is stowed\u003c\/li\u003e\n\u003cli\u003eNickel-plated contacts with multi-crimp construction help reduce corrosion at the connection point\u003c\/li\u003e\n\u003cli\u003eTinned wire leads are better suited to marine wiring runs than bare copper leads\u003c\/li\u003e\n\u003cli\u003eCompatible with Attwood locking-collar pole light series including 5110, 5310, 5330, 5340, 5530, 5540, and 5091-10-7\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis base is for angled plug-in pole lights with Attwood's 2-pin locking-collar connection. It is a good match when you are replacing the same style base or setting up a pole light where deck space is tight. It is not the right choice for straight-pole bases or for other pin layouts, so it is worth checking the pole style and the socket pattern before ordering.\u003c\/p\u003e\u003cp\u003eBecause the housing is compact, it works well on smaller transoms, cockpit corners, and other spots where a wider base can interfere with lines, covers, or foot traffic. The black finish also keeps the base visually understated on darker trim and hardware.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe 91022-7 uses wire leads for connection into the boat's navigation light circuit, so installation is straightforward for a replacement or a fresh rig. Support the wiring below the mounting surface and make clean, sealed splices so the connection stays stable as the boat pounds through chop and the pole is removed and reinstalled over time.\u003c\/p\u003e\u003cp\u003eThis part does not determine system voltage on its own. The electrical load and lamp style come from the pole light used with it, so the important fit points are the angled 2-pin locking-collar connection, the mounting space, and the matching light series.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis base makes sense on boats that use removable all-round or navigation pole lights and do not have much room around the mounting spot. It suits owners replacing a worn pole base on a fishing boat, runabout, or small cruiser where the socket needs to stay protected when the light is off the boat.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":52023467114677,"sku":"QBP770272","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329275_qbp770272.jpg?v=1780191819"},{"product_id":"qbp532244","title":"Attwood Marine Portable Fuel Tank Cap, For 8803LP\/8806LP\/8812LP\/8812LLP Tanks, 2-1\/4 in Neck, High-Flow Valve, Tethered, EPA Certified","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 88TC06-7 is a portable fuel tank cap with a tether for Attwood portable tanks that use a standard 2 1\/4 inch neck. It is EPA-certified, uses a high-flow automatic vacuum valve, and is rated for engines from 0 to 350 HP.\u003c\/p\u003e\u003cp\u003eThis replacement cap is built for the job a portable tank sees on the water: frequent refueling, tank swaps, trailering, and storage in lockers or under seats where a loose cap is easy to misplace. The tether keeps the cap attached to the tank, and the ratcheting design gives a clear sign that the cap is seated and sealed.\u003c\/p\u003e\u003cp\u003eIt is specified for Attwood 8803LP, 8806LP, 8812LP, and 8812LLP fuel tanks. For anyone replacing a worn cap or a missing cap on one of those tanks, this is the piece that restores the tank to its intended venting and sealing setup.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits Attwood portable fuel tanks that use a standard 2 1\/4 inch neck.\u003c\/li\u003e\n\u003cli\u003eSpecified for Attwood 8803LP, 8806LP, 8812LP, and 8812LLP tanks.\u003c\/li\u003e\n\u003cli\u003eHigh-flow automatic vacuum valve supports fuel demand on engines from 0 to 350 HP.\u003c\/li\u003e\n\u003cli\u003eTether keeps the cap attached to the tank during refueling, transport, and routine handling.\u003c\/li\u003e\n\u003cli\u003eRatcheting cap helps confirm the cap is fully tightened and properly seated.\u003c\/li\u003e\n\u003cli\u003eEPA-certified cap for compliant use with portable marine fuel tanks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cap is meant for portable topside fuel tanks, not deck fills or built-in fuel systems. The safest fit check is the tank model together with the neck size, especially when replacing an older cap that may have been lost or swapped at some point.\u003c\/p\u003e\u003cp\u003eBecause it is matched to specific Attwood portable tank models, it suits common small-boat fuel setups where the tank is removed for filling or stored in a cockpit locker, under an aft bench, or alongside an outboard splashwell.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eInstall it on a clean tank neck and tighten until the ratcheting action indicates the cap is fully closed. Make sure the tether is not twisted or trapped under the cap, and keep the sealing area free of grit and fuel residue so the cap can seat the way it should.\u003c\/p\u003e\u003cp\u003eOn portable tanks, a cap does more than cover the opening. It also affects how the tank vents and feeds fuel, so replacing a damaged cap with the correct style matters for both everyday use and storage between trips.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis cap makes sense for boats that run portable fuel tanks for a main small outboard or a kicker, especially where tanks are moved often between dock, vehicle, and boat. It also suits owners who want the cap to stay attached during refueling and tank handling instead of ending up loose in the cockpit or overboard.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":52023532781749,"sku":"QBP532244","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329583_qbp532244.webp?v=1780191862"},{"product_id":"qbp373871","title":"Attwood Marine Pressure Relief System Deck Fill, Straight Body, 1-1\/2 in Fill Hose, 5\/8 in Vent Hose","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 99DFPVSB1S is a straight-body deck fill for pressure relief fuel systems, with a scalloped black plastic cap and hose connections for 1-1\/2 inch fill hose and 5\/8 inch vent hose. It uses dual 1 psi diurnal emission control and overpressure relief valves in the cap, along with triple high-flow vacuum valves to manage tank pressure during fueling and normal fuel draw.\u003c\/p\u003e\u003cp\u003eThis fill is built for boats that need cleaner refueling behavior at the dock. The automatic nozzle shutoff works from 4 to 18 gallons per minute, which helps the system reach the proper fill level without the usual spit-back and well-back problems that can make marina fueling messy. It is also built to keep water out of the fuel system and is compatible with ethanol-blended fuels.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStraight-body deck fill for pressure relief fuel systems with a scalloped black plastic cap\u003c\/li\u003e\n\u003cli\u003eFits 1-1\/2 inch fill hose and 5\/8 inch vent hose\u003c\/li\u003e\n\u003cli\u003eDual 1 psi diurnal emission control and overpressure relief valves built into the cap\u003c\/li\u003e\n\u003cli\u003eTriple high-flow vacuum valves to maintain make-up airflow in higher-demand fuel systems\u003c\/li\u003e\n\u003cli\u003eAutomatic nozzle shutoff for fueling rates from 4 to 18 gpm\u003c\/li\u003e\n\u003cli\u003eBuilt to keep water from entering the fuel system\u003c\/li\u003e\n\u003cli\u003eCompatible with ethanol-blended fuels\u003c\/li\u003e\n\u003cli\u003eHinged cap with an audible click when closed\u003c\/li\u003e\n\u003cli\u003eEPA and CARB certified, meets CARB 13 CCR 2235 and ISO 13331, and is ISO 10088 and CE compliant\u003c\/li\u003e\n\u003cli\u003eUsed as part of Attwood VaporTec and SecureStop system layouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis model makes sense where the hose run below the deck works with a straight fill body rather than an angled fitting. Before ordering, confirm that the boat is set up for a pressure relief fuel system and that your existing hose sizes match the 1-1\/2 inch fill connection and 5\/8 inch vent connection.\u003c\/p\u003e\u003cp\u003eOn a retrofit, the key question is not just deck appearance, but system layout. This fill belongs in a matched pressure relief setup, so it is a better fit for boats already using compatible Attwood system components than for an older open-vent arrangement.\u003c\/p\u003e\u003ch6\u003eCompliance and system use\u003c\/h6\u003e\u003cp\u003eThis fill meets the current standards commonly checked on regulated fuel-system installs, including EPA and CARB requirements, CARB 13 CCR 2235, ISO 13331, ISO 10088, and CE compliance. That matters on boats where evaporative-emissions control, nozzle retention, and controlled tank venting are part of the fuel-system spec.\u003c\/p\u003e\u003cp\u003eIt is a practical match for center consoles, bay boats, and cruisers that refuel regularly at marina pumps and need pressure management built into the fill itself. For owners replacing a worn deck fill in a compliant pressure relief system, this part covers the details that usually decide fit: hose size, fueling rate, cap style, and standards compliance.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":52023533306037,"sku":"QBP373871","price":104.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329599_qbp373871.jpg?v=1780191863"},{"product_id":"qbp798655","title":"Attwood Marine Flush Mount Fuel Vent, SS316, 5\/8 in Hose, 7\/8 in Max Hull, 1-3\/8 in Hole","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine Alloy Flush Mount Fuel Vent is a 316 stainless steel fuel tank vent for boats that need a clean hull finish without a protruding exterior cap. It fits 5\/8 inch inner diameter vent hose, installs through a 1-3\/8 inch hole, and is suitable for hull thicknesses up to 7\/8 inch.\u003c\/p\u003e\u003cp\u003eThis vent is built for marine fuel venting applications where the outside fitting should sit close to the hull and stay less exposed to bumps, dock contact, and routine washdowns. The cap can be removed with a hex head wrench, giving access for filter cleaning and fuel system pressure testing without replacing the whole fitting.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e316 stainless steel alloy construction helps resist corrosion in saltwater and freshwater environments.\u003c\/li\u003e\n\u003cli\u003eFlush exterior profile reduces the chance of damage from hull scrapes, dock contact, or gear brushing against the fitting.\u003c\/li\u003e\n\u003cli\u003eAccepts standard 5\/8 inch inner diameter marine fuel vent hose.\u003c\/li\u003e\n\u003cli\u003eFits hulls up to 7\/8 inch thick with a 1-3\/8 inch installation hole.\u003c\/li\u003e\n\u003cli\u003eRemovable cap allows filter cleaning and fuel system pressure testing with a hex head wrench.\u003c\/li\u003e\n\u003cli\u003eSupplied with two silicone gaskets to support a sealed installation at the hull.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis fuel vent is offered in two configurations for different hose routing needs.\u003c\/p\u003e\u003cp\u003eThe vent body, 316 stainless steel alloy construction, 5\/8 inch hose fit, 7\/8 inch maximum hull thickness, and 1-3\/8 inch installation hole are consistent across the listed versions. The difference is the vent outlet style.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e66031-3: Straight vent. This version works for installations where the vent hose can run directly from the fitting without needing an immediate change in direction.\u003c\/li\u003e\n\u003cli\u003e66032-3: 90 vent. This version helps when space behind the hull is tighter or the hose needs to turn soon after the fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore drilling, confirm the mounting location has enough backing space for the selected straight or 90 degree hose path. The fitting is intended for a 1-3\/8 inch hull opening and should be paired with 5\/8 inch inner diameter fuel vent hose.\u003c\/p\u003e\u003cp\u003eThe flush face makes it a good match for hull sides, cockpit-adjacent areas, and exterior locations where a cleaner profile is preferred. As with any fuel system component, the vent should be installed so the hose runs without kinks, low traps, or sharp bends that could restrict tank breathing.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eThe removable cap gives practical access for cleaning the filter and pressure testing the fuel system. Periodic inspection is useful on boats that see salt spray, fuel splash, heavy washdowns, or long storage periods, especially around the gasket area and hose connection.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush mount fuel vent\u003c\/li\u003e\n\u003cli\u003eTwo silicone gaskets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Straight Vent","offer_id":52023558111413,"sku":"QBP798655-V1","price":36.99,"currency_code":"USD","in_stock":true},{"title":"90 Vent","offer_id":52023558144181,"sku":"QBP798655-V7","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332536_qbp798655.jpg?v=1780191874"},{"product_id":"qbp772263","title":"Attwood Marine Straight Fuel Vent, 5\/8 in ID Hose, 3\/4 in Hole, 7\/8 in Max Hull Thickness, Black Polypropylene","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 1607-3 is a straight fuel tank vent for boats that lets air escape from the tank while you refuel. It connects to a 5\/8 inch I.D. vent hose, fits a 3\/4 inch installation hole, and works with hull sections up to 7\/8 inch thick.\u003c\/p\u003e\u003cp\u003eThe body is black polypropylene with splash-resistant construction that also stands up well around saltwater and wet hull sides. It meets ABYC ventilation specifications, which matters when you are replacing a vent in a fuel system that needs to stay safe and properly vented at the dock and underway.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStraight vent body for fuel vent runs that come to the hull fitting without a built-in angle\u003c\/li\u003e\n\u003cli\u003eFits 5\/8 inch I.D. hose, which is a key sizing point before ordering a replacement\u003c\/li\u003e\n\u003cli\u003eMounts in a 3\/4 inch hole and accepts hull thickness up to 7\/8 inch\u003c\/li\u003e\n\u003cli\u003eBlack polypropylene body resists splash exposure and corrosion around the fuel fill area\u003c\/li\u003e\n\u003cli\u003eMeets ABYC ventilation specifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis vent is a good match for boats that already use a straight hull-side fuel vent with 5\/8 inch hose. Before ordering, check the hose inside diameter, the existing mounting hole, and the thickness of the panel or hull section where the vent passes through.\u003c\/p\u003e\u003cp\u003eFor replacement work, the straight layout matters just as much as the hose size. If your current vent line reaches the hull fitting in a direct run, this style keeps the install simple and avoids forcing the hose into a bend right at the connection.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis part suits boats with a conventional vented fuel tank setup, including many runabouts, center consoles, pontoons, and small cruisers. It makes sense for owners replacing an older vent that is faded, cracked, or no longer the right match for the hose and mounting hole already in the boat.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":52023561224373,"sku":"QBP772263","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329485_qbp772263.jpg?v=1780191879"},{"product_id":"qbp376644","title":"Perko Gas Fill, 1-1\/2 in Hose, Chrome-Plated Zinc Alloy, Black Polymer Flange","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 1313DP0CHR is a gas deck fill for 1-1\/2 inch hose, with a 3-1\/8 inch flange outside diameter, a 1-7\/8 inch neck, and a 2-1\/8 inch mounting hole diameter.\u003c\/p\u003e\u003cp\u003eIt uses a chrome plated zinc alloy flange with a black polymer flange and cap, so it gives you a clean deck finish while keeping the cap tethered during fueling. The assembly includes a grounding screw, cap retainer, and gasket, and it is marked for gas.\u003c\/p\u003e\u003cp\u003eThis is a non-EPA style fill. It meets U.S.C.G. safety standards dated January 31, 1977 for gasoline fuel systems under 33 CFR 183, and it does not meet 40 CFR 1060 Subpart B emissions requirements.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 1-1\/2 inch fuel fill hose, which is a common size on many older gasoline boat installations\u003c\/li\u003e\n\u003cli\u003e3-1\/8 inch flange outside diameter, 2-1\/8 inch mounting hole diameter, and 1-7\/8 inch neck for checking deck cutout and below-deck clearance before replacement\u003c\/li\u003e\n\u003cli\u003eChrome plated zinc alloy flange with black polymer flange and cap for a chrome look on deck with a black trim ring\u003c\/li\u003e\n\u003cli\u003eTethered cap helps keep the cap attached during refueling\u003c\/li\u003e\n\u003cli\u003eGrounding screw, cap retainer, and gasket are included\u003c\/li\u003e\n\u003cli\u003eUses #6 mounting screws, which matters when matching an existing deck pattern or planning a new install\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis fill is a straightforward replacement when your boat already uses 1-1\/2 inch fill hose and the deck cutout is 2-1\/8 inches. The 3-1\/8 inch flange gives enough coverage around the opening, and the 1-7\/8 inch neck is worth checking against deck thickness, hose bend radius, and access below the deck before ordering.\u003c\/p\u003e\u003cp\u003eThe grounding screw matters on gasoline systems because the fill neck needs proper bonding during refueling. For repowers, restorations, and deck hardware refreshes, this part makes the most sense where the hose size, hole size, and mounting approach already line up with the existing system.\u003c\/p\u003e\u003ch6\u003eCompatibility and use\u003c\/h6\u003e\u003cp\u003eThis part suits gasoline fuel fill points on boats that use 1-1\/2 inch hose, including many runabouts, center consoles, skiffs, and small cruisers. It is a good match for replacing a worn or corroded gas fill on an older setup where the original dimensions are still the right fit.\u003c\/p\u003e\u003cp\u003eIf your fuel system needs a fill that meets evaporative emissions requirements under 40 CFR 1060 Subpart B, this is not the right style to use. For replacement work, that distinction is worth checking before you cut the deck or reconnect the hose.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":52023575609525,"sku":"QBP376644","price":35.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330262_qbp376644.jpg?v=1780191906"},{"product_id":"qbp824907","title":"Perko 0582 Style Replacement Cap, For 0582 \u0026 0583 Deck Fills, Gas Diesel Water Inserts","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 0582DPS99A is a replacement cap for Perko 0582 and 0583 style vented deck fills used on 1-1\/2\" fill hose systems. It includes gas, diesel, and water inserts, and it is meant for traditional non-EPA vented fill arrangements rather than EPA compliant sealed fuel systems.\u003c\/p\u003e\u003cp\u003eThis cap is a practical service part when the original cap is worn, missing, or no longer clearly marked at the deck fill. The polished stainless steel cap has a scalloped shape that is easy to grip by hand, and the retaining cable helps keep the cap attached to the fill instead of ending up loose on deck or overboard.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits Perko 0582 and 0583 style vented deck fills\u003c\/li\u003e\n\u003cli\u003ePolished stainless steel cap with a scalloped hand-grip profile\u003c\/li\u003e\n\u003cli\u003eIncludes interchangeable inserts for gas, diesel, and water identification\u003c\/li\u003e\n\u003cli\u003ePolymer retaining cable helps keep the cap with the fill assembly\u003c\/li\u003e\n\u003cli\u003eMade for non-EPA vented fill setups and not for EPA compliant sealed fuel systems\u003c\/li\u003e\n\u003cli\u003eSold as a single replacement cap assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis replacement cap is intended for Perko 0582 angled-neck and 0583 straight-neck vented fills. Those fill bodies are commonly used with 1-1\/2\" fill hose, so this part is a good match when the existing fill remains in service and only the cap needs replacement.\u003c\/p\u003e\u003cp\u003eIt is not a universal cap for every deck fill, and it should not be used on sealed EPA fuel systems. On older boats with separate deck fills for fuel or water, matching the cap style matters because the cap needs to suit the fill body already installed on the deck.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eReplacement is straightforward: remove the worn cap, check that the fill neck and sealing surface are clean, and fit the new cap with the correct insert for the tank below. Clear labeling at the fill point matters on a busy fuel dock, especially on boats that carry both fuel and water fills in the same area.\u003c\/p\u003e\u003cp\u003eThis is a sensible replacement for center consoles, cruising boats, and sailboats that still use Perko vented fills and need the original cap style back in place without changing the full deck fill assembly.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":52023596417205,"sku":"QBP824907","price":74.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330223_qbp824907.jpg?v=1780191925"},{"product_id":"qbp979703","title":"Perko 1313 Gas Fill Replacement Cap, Non-Locking, Black Polymer","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 0126DP0BLK is a non-locking replacement cap for Perko 1313 gas fills. It also matches the cap used on Perko 1399 gas fills, so it is a practical spare when the original cap is missing, worn, or no longer closes the fill cleanly.\u003c\/p\u003e\u003cp\u003eIt is meant for the Perko gas fill pattern used with 1-1\/2 inch fuel hose. On those fills, the deck flange measures 3-1\/8 inches across and installs in a 2-1\/8 inch mounting hole, which helps when you are checking compatibility on an older boat before ordering.\u003c\/p\u003e\u003cp\u003eThis is a straightforward service part for boats that already have the correct Perko fill in place. It makes sense when the existing deck hardware is still sound and the only thing that needs replacing is the cap.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNon-locking replacement cap for Perko Figure 1313 gas fills\u003c\/li\u003e\n\u003cli\u003eAlso fits Perko Figure 1399 gas fills\u003c\/li\u003e\n\u003cli\u003eMatches the Perko gas fill pattern used with 1-1\/2 inch fuel hose\u003c\/li\u003e\n\u003cli\u003eSpecific Perko fitment rather than a universal deck fill cap\u003c\/li\u003e\n\u003cli\u003eUseful as a spare when the original cap is lost, damaged, or no longer closes cleanly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit is the main thing to verify here. This cap is for the Perko 1313 and 1399 fill style, not for every 1-1\/2 inch deck fill. If your boat uses a sealed EPA-style cap or a locking cap assembly, this is a different replacement path.\u003c\/p\u003e\u003cp\u003eA quick check at the boat is to compare the existing fill, not just the hose size. Boats with the matching Perko fill usually have the 3-1\/8 inch flange and 2-1\/8 inch mounting hole pattern noted above.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eReplacement is simple once the fill has been identified correctly. Thread the cap onto the existing fill and make sure it seats fully before fueling. On deck fills that see spray, sun, and regular foot traffic, a sound cap matters because it keeps the opening closed between fuel stops.\u003c\/p\u003e\u003cp\u003eThis is a good match for owners keeping an existing Perko fuel fill in service on fishing boats, cruisers, and sailboats where replacing the full deck fitting is unnecessary.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":52023605952693,"sku":"QBP979703","price":16.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330202_qbp979703.jpg?v=1780191930"},{"product_id":"qbp508413","title":"Whitecap Replacement Cap \u0026 Chain f\/6001 Gas Fill 6002","description":"Replacement Cap and Chain - 6001 Gas Fill\u003cbr\u003e\u003cbr\u003eGas Fill, 1-1\/2\" Hose w\/Splash Shield","brand":"Whitecap","offers":[{"title":"Default Title","offer_id":52023943626933,"sku":"QBP508413","price":42.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1234826_qbp508413.jpg?v=1763261278"},{"product_id":"qbp465914","title":"Whitecap Replacement Cap \u0026 Chain f\/6123, 6123, 6125 \u0026 6126 6061C","description":"\u003cp\u003eDescription: Replacement Cap \u0026amp; Chain for 6123, 6124, 6125 and 6126.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eMaterial: 316 Stainless Steel\u003c\/p\u003e","brand":"Whitecap","offers":[{"title":"Default Title","offer_id":52024033640629,"sku":"QBP465914","price":32.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1242035_qbp465914.jpg?v=1763263437"},{"product_id":"qbp527068","title":"Whitecap Replacement Cap \u0026 Chain f\/6031, 6032, 6033 \u0026 6034 6074C","description":"\u003cp\u003eReplacement Cap \u0026amp; Chain for 6031, 6032, 6033, 6034, 6394, 6395, 6124B, 6126S. Made of 316 S.S.\u003c\/p\u003e","brand":"Whitecap","offers":[{"title":"Default Title","offer_id":52024033673397,"sku":"QBP527068","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1242037_qbp527068.jpg?v=1763263437"},{"product_id":"qbp374809","title":"Brp Vent Plug Disc\/Screw (5009914)","description":"\u003cp\u003eWaterproof, Dustproof, Sealing, Breathable, Conductive, and Shielding are some of the functions and properties of the Vent Plug Disc\/Screw (5009914). Because of the design, it can use in a variety of difficult applications, Vent Plug Disc\/Screw (5009914) ensures good durability performance and that it does not separate from the housing during installation and application. Vent Plug Disc\/Screw (5009914) has a waterproof component on an exterior cabinet and other outdoor seals. It can significantly minimize fog and condensation and work faultlessly without maintenance in a demanding environment with long service life. The best process technique ensures that the vents last as long as possible.\u003c\/p\u003e \u003cp\u003eKey features:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMoisture vapor diffusion\u003c\/li\u003e \u003cli\u003eAnti-condensation measures\u003c\/li\u003e \u003cli\u003ePressure equilibration in a short period\u003c\/li\u003e \u003cli\u003eDefense against dust, rain, and other pollutants in the environment\u003c\/li\u003e \u003cli\u003eElectrical shorts and corrosion are avoided.\u003c\/li\u003e \u003cli\u003eLower seal stress.\u003c\/li\u003e \u003cli\u003eHigh quality yet competitive price.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSpecifications:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSKU: 5009914\u003c\/li\u003e \u003cli\u003eWeight: 0.02 LBS\u003c\/li\u003e \u003cli\u003eManufacturer Part Number (MPN): 5009914\u003c\/li\u003e \u003cli\u003eBrand: BRP\u003c\/li\u003e \u003c\/ul\u003e","brand":"BRP","offers":[{"title":"Default Title","offer_id":52024199381173,"sku":"QBP374809","price":4.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1253097_qbp374809.jpg?v=1763267074"},{"product_id":"qbp296281","title":"Attwood Marine In-Line Fuel Overflow Protector, 5\/8 in Hose, ABYC H-24, Ball-Style Check Valve","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 1675-6 is an in-line fuel overflow protector for traditional fuel tank vent systems that use standard 5\/8\" ID vent hose. It installs in the vent line rather than the fill hose and uses a ball-style check valve with internal baffling to interrupt the fuel surge that can push out through the vent during refueling. It meets ABYC H-24 and measures about 4-11\/16\" long, which helps when the vent run is tucked inside the gunwale or another tight space.\u003c\/p\u003e\u003cp\u003eAs the tank nears full, it helps automatic fuel nozzles shut off before fuel spills from the vent. When refueling with a non-automatic nozzle, it creates a gurgling warning so the tank does not get topped off blindly. The body withstands oil, gasoline, and alcohol-blended fuels, and it can be mounted in any orientation within 45 degrees of vertical.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits traditional marine fuel tank vent systems that use standard 5\/8\" ID vent hose\u003c\/li\u003e\n\u003cli\u003eBall-style check valve with internal baffling helps stop vent-line surge during refueling\u003c\/li\u003e\n\u003cli\u003eHelps automatic fuel nozzles shut off as the tank approaches full\u003c\/li\u003e\n\u003cli\u003eProduces a gurgling warning with non-automatic nozzles when the tank is near capacity\u003c\/li\u003e\n\u003cli\u003eOperates within 45 degrees of vertical, which gives more flexibility in tight vent runs\u003c\/li\u003e\n\u003cli\u003eGlass-filled polypropylene body withstands oil, gasoline, and alcohol-blended fuels\u003c\/li\u003e\n\u003cli\u003eMeets ABYC H-24\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis unit is for boats with a traditional vented fuel tank and a 5\/8\" inside-diameter vent hose. It is not a deck fill, a fill hose fitting, or an exterior vent fitting by itself. It is the in-line device that sits between sections of the vent hose to manage surge as the tank fills.\u003c\/p\u003e\u003cp\u003eIt is a sensible match for boats that are regularly fueled at marina pumps and for installations where the vent hose runs behind the hull side or inside the gunwale. The compact body helps when there is not much straight hose length available, but the mounting angle still needs to stay within the allowed range.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward: cut the vent hose, place the protector in line with the vent side oriented correctly, and secure the hose with the supplied clamps. Before fitting it, check the hose route and confirm there is enough access to keep the unit within 45 degrees of vertical once the hose is supported and the paneling is back in place.\u003c\/p\u003e\u003cp\u003eFor buyers trying to solve fuel spitback from the vent during normal refueling, this is the part that addresses that problem without changing the deck fill hardware. It suits owners who want cleaner fill-ups and a clearer warning as the tank reaches capacity.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIn-line fuel overflow protector\u003c\/li\u003e\n\u003cli\u003e2 hose clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":52581865881781,"sku":"QBP296281","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329153_qbp296281.jpg?v=1780200899"},{"product_id":"qbp475972","title":"Attwood Marine Replacement Gas Deck Fill Cap, Black","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 912036B is a gas fill subassembly with a black flip top cap for gasoline systems that use a 1-1\/2 inch I.D. fuel hose and a 5\/8 inch I.D. vent hose. It combines the fill and vent functions in one deck fitting, which helps keep the fuel fill area simpler on boats where deck space and hose routing are limited.\u003c\/p\u003e\u003cp\u003eThe neck opening accepts fuel nozzles up to 1 inch O.D. Above deck, the fitting measures 4 inches long, 3.25 inches wide, and 5\/16 inch high, with a below deck depth of 3.5 inches. The mounting flange uses four holes for #8 fasteners, and the body is built from cast aluminum and stainless steel with a black two piece plastic cap.\u003c\/p\u003e\u003cp\u003eThis is a practical piece for a fuel fill location that sees regular sun and spray, but it is still a fuel fill fitting rather than a watertight deck plate. The cap is not watertight when closed, so it belongs in the normal fuel fill position on deck and should be installed as part of a properly bonded fuel system.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFor gasoline fill systems with 1-1\/2 inch I.D. fuel hose and 5\/8 inch I.D. vent hose\u003c\/li\u003e\n\u003cli\u003eCombined fill and vent layout removes the need for a separate tank vent fitting\u003c\/li\u003e\n\u003cli\u003eNeck opening accepts fuel nozzles up to 1 inch O.D.\u003c\/li\u003e\n\u003cli\u003eCast aluminum and stainless steel construction with a black two piece plastic cap\u003c\/li\u003e\n\u003cli\u003eBuilt in splash guard at the neck helps manage fuel during filling\u003c\/li\u003e\n\u003cli\u003eMounts at 90 degree intervals independent of the fill neck angle\u003c\/li\u003e\n\u003cli\u003e4 inch x 3.25 inch above deck footprint with 3.5 inch below deck depth\u003c\/li\u003e\n\u003cli\u003eFour hole mounting flange for #8 fasteners\u003c\/li\u003e\n\u003cli\u003eRequires a bonding wire to prevent sparking when the nozzle is inserted\u003c\/li\u003e\n\u003cli\u003eCap is not watertight when closed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis fitting is for gas applications and should be matched to the hose sizes already in the boat or planned for the installation. The 1-1\/2 inch fuel hose size and 5\/8 inch vent hose size are common on many powerboats, but deck fills are not universal, so the hose I.D., deck footprint, screw pattern, and below deck clearance all need to line up before you swap out an existing unit.\u003c\/p\u003e\u003cp\u003eIt suits boats where the fill location is on an angled or crowded section of deck and where a combined fill and vent setup keeps the installation cleaner than using separate components. On older refits, it is worth checking the current fill body and mounting pattern rather than assuming a gas fill will interchange by appearance alone.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe flange can be oriented in 90 degree increments, which helps when the best cap position on deck does not match the easiest hose angle below deck. That makes it easier to keep the opening accessible at the rail, cockpit side, or gunwale while still routing the fuel and vent hose without sharp bends.\u003c\/p\u003e\u003cp\u003eInstall it with the correct fuel hose, vent hose, fasteners, bonding wire, and deck sealant for the application. Because the cap is not watertight, this fitting should sit where washdown water can drain away normally and where the deck surface around the flange stays in the same service conditions intended for a fuel fill.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for owners replacing an older combined gas fill and vent fitting on runabouts, center consoles, fishing boats, and similar powerboats. It also makes sense in refit work where below deck space is tight and the fill location needs some flexibility in how the body is clocked during installation.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":52581867684021,"sku":"QBP475972","price":14.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329191_qbp475972.jpg?v=1780200933"},{"product_id":"qbp895828","title":"Attwood Marine Cowl Vent, 3 in Ventilation Hose, Chrome-Plated ZAMAK","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 1364A1 is a deck-mount cowl vent for standard 3 inch ventilation hose. It can be set up as either an intake or an exhaust, so it works where you need passive airflow through an enclosed space rather than a powered blower.\u003c\/p\u003e\u003cp\u003eThis vent uses a flexible flange attachment that connects to the hose below deck, then accepts the vent head once the base is mounted. The vent body is die-cast ZAMAK with a chrome finish, and the flange is black plastic. For the installation shown in the instructions, the deck opening is 3-1\/2 inches when a nylon wire tie is used as the hose clamp.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits any standard 3 inch ventilation hose\u003c\/li\u003e\n\u003cli\u003eCan be used for either intake or exhaust airflow\u003c\/li\u003e\n\u003cli\u003eDie-cast ZAMAK vent head with chrome finish\u003c\/li\u003e\n\u003cli\u003eBlack plastic flange attaches the hose below deck\u003c\/li\u003e\n\u003cli\u003eFlexible flange-and-head design allows the vent head to snap onto the mounted base\u003c\/li\u003e\n\u003cli\u003eInstallation uses three #8 countersunk screws and a hose clamp or 15 inch nylon wire tie\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is a straightforward replacement part when your boat already uses a 3 inch vent hose and a deck cowl in this style. The base is used as the drilling template, the hose slides up through the deck cutout and over the flange, and the vent head attaches after the base is fastened down. It is worth checking the deck opening before ordering, since the stated 3-1\/2 inch hole size is tied to the clamp method used during installation.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis vent suits refit work on boats that need passive deck ventilation through a hose-fed run below deck. It makes sense for owners replacing an older cowl vent on a sailboat, runabout, or classic fiberglass boat where the existing hose size and mounting style need to stay the same.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":52581868372149,"sku":"QBP895828","price":36.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329208_qbp895828.webp?v=1780200944"},{"product_id":"qbp429731","title":"Perko 1318 Gas Fill\/Tank Vent, 1-1\/2 in Hose, 5\/8 in Vent, 35° Angled Neck, Black Polymer","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 1318DPGBLK is a combination vented gas fill and tank vent for boats using a 1-1\/2 inch fuel fill hose and a 5\/8 inch vent hose. It combines the deck fuel fill and vent function in one black polymer fitting, with a 35° angled neck that helps the hose run cleanly below deck where space is tight.\u003c\/p\u003e\u003cp\u003eThis fill uses a flip top cap, so no deck plate key is needed at the fuel dock. The integral tank vent includes a flame arrestor, and the neck length is 2-7\/16 inches with mounting for #10 screws. It is made for gasoline fuel systems that require a vented fill, while keeping the deck layout cleaner than separate fill and vent fittings.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCombination gas fill and tank vent reduces the need for a separate deck vent fitting.\u003c\/li\u003e\n\u003cli\u003eFits 1-1\/2 inch fuel fill hose and 5\/8 inch vent hose for common marine gasoline tank installations.\u003c\/li\u003e\n\u003cli\u003e35° angled neck helps route the fuel hose below deck without forcing a sharp bend.\u003c\/li\u003e\n\u003cli\u003eBlack polymer construction suits installations where a low-glare, dark deck fitting is preferred.\u003c\/li\u003e\n\u003cli\u003eIntegral tank vent includes a flame arrestor for gasoline fuel system use.\u003c\/li\u003e\n\u003cli\u003eFlip top cap allows fueling without a deck plate key.\u003c\/li\u003e\n\u003cli\u003eNo ground wire is required for installation.\u003c\/li\u003e\n\u003cli\u003eUses #10 mounting screws and has a 2-7\/16 inch neck length.\u003c\/li\u003e\n\u003cli\u003eMeets USCG gasoline fuel system requirements under 33 CFR 183, but is not for installations that require 40 CFR 1060 emissions compliance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis fitting is intended for deck or gunwale locations where the fill hose can lead from the fitting to the tank without kinking. The 35° neck is useful on sloped deck surfaces and in compartments where a straight-neck fill would make the hose path too tight.\u003c\/p\u003e\u003cp\u003eConfirm the existing fuel fill hose size, vent hose size, available clearance below the mounting surface, and screw pattern before replacing an old fill. Fuel hose and vent hose should be routed and clamped according to marine fuel system practice, with attention to low spots where fuel or water could collect.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis part is a practical match for small powerboats, center consoles, runabouts, and other gasoline-powered vessels that use a vented deck fill for a built-in fuel tank. It works well when the owner wants a simple fuel deck fitting with a hinged cap and an integrated vent rather than separate fill and vent hardware.\u003c\/p\u003e\u003cp\u003eBecause this is a gasoline fuel system component, it should be installed only in applications that match the hose sizes and regulatory requirements of the vessel. For newer evaporative emissions systems, confirm whether the boat requires EPA 40 CFR 1060 compliant hardware before ordering.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":52581876498613,"sku":"QBP429731","price":42.18,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330400_qbp429731.webp?v=1780201031"},{"product_id":"qbp800127","title":"Attwood Marine 99CC Carbon Canister, 5\/8 in Vent Hose, EPA\/CARB, Ethanol-Compatible","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Attwood Marine carbon canister is a fuel vent vapor-control component for marine fuel systems that need an EPA-rated canister matched to tank capacity and installation location. The range uses 5\/8 inch vent hose and includes compact, standard, engine-compartment, and large-vessel configurations for different vessel layouts.\u003c\/p\u003e\u003cp\u003eEach canister uses engineered charcoal media to reduce fuel vapor emissions from the vent line, while the low-permeation shell helps reduce overall system emissions. The provided bracket setup allows mounting in any orientation, which is useful when space around fuel tanks, lockers, bilge areas, and engine spaces is limited.\u003c\/p\u003e\u003cp\u003eThe variants cover EPA trailerable vessel capacities from 70 gallons to 420 gallons and EPA non-trailerable vessel capacities from 110 gallons to 660 gallons. The heat-shield version is the one intended for engine-compartment installations where a pre-installed composite heat shield is required.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFuel vent carbon canister range for marine evaporative-emissions control systems.\u003c\/li\u003e\n\u003cli\u003eFits 5\/8 inch vent hose for common marine fuel vent plumbing.\u003c\/li\u003e\n\u003cli\u003eEngineered charcoal media helps reduce hydrocarbons released through the tank vent line.\u003c\/li\u003e\n\u003cli\u003eLow-permeation shell helps reduce overall fuel-system emissions.\u003c\/li\u003e\n\u003cli\u003eCan be mounted in any orientation using the provided brackets, which helps when routing around tanks, stringers, bulkheads, and service access points.\u003c\/li\u003e\n\u003cli\u003eCompatible with ethanol-blended fuels.\u003c\/li\u003e\n\u003cli\u003eEPA-rated capacities cover compact installations through large-vessel fuel systems.\u003c\/li\u003e\n\u003cli\u003eHeat-shield option includes a pre-installed composite shield for engine-compartment use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in several canister configurations so the canister capacity and heat-shield requirement can be matched to the boat’s fuel system layout.\u003c\/p\u003e\u003cp\u003eThe main differences are canister class, EPA-rated tank capacity, and whether the unit includes the engine-compartment heat shield. The 5\/8 inch vent hose fitment, ethanol-blended fuel compatibility, low-permeation shell, and bracket mounting approach are consistent across the listed configurations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e99CC085-1S: Standard canister with no engine-compartment heat shield. It is rated for 220 gallons trailerable and 350 gallons non-trailerable under EPA applications, making it a fit for larger fuel systems than the compact version.\u003c\/li\u003e\n\u003cli\u003e99CC045-1S: Compact canister with no engine-compartment heat shield. It is rated for 70 gallons trailerable and 110 gallons non-trailerable under EPA applications, which suits smaller fuel tanks where space is tighter.\u003c\/li\u003e\n\u003cli\u003e99CC085HSA1S: Standard canister with an engine-compartment heat shield. It carries the same 220 gallon trailerable and 350 gallon non-trailerable EPA capacities as the standard version, with a pre-installed composite heat shield for engine-space placement.\u003c\/li\u003e\n\u003cli\u003e99CC150-1S: Large vessel canister with no engine-compartment heat shield. It is rated for 420 gallons trailerable and 660 gallons non-trailerable under EPA applications for high-capacity fuel systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eConfirm the vessel’s fuel tank capacity, trailerable or non-trailerable classification, vent hose size, and mounting area before selecting a configuration. The canister should be installed as part of the fuel vent system where it can be secured, protected from direct liquid fuel or water exposure, and kept accessible for inspection.\u003c\/p\u003e\u003cp\u003eThe provided bracket mounting arrangement gives the installer flexibility with orientation, which matters on boats where fuel-system components often share space with tanks, harnesses, steering gear, pumps, and structural members. The engine-compartment variant should be used when the installation requires the integrated heat shield.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis canister range is a practical match for builders, service yards, and boat owners replacing or configuring an EPA-compliant marine fuel vent system. It is most relevant on gasoline-powered boats where vapor control, vent-hose routing, and tank-capacity matching are part of the fuel-system service or refit.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Compact \/ No","offer_id":52581880037557,"sku":"QBP800127-V2","price":139.99,"currency_code":"USD","in_stock":true},{"title":"Standard \/ No","offer_id":52581880070325,"sku":"QBP800127-V6","price":124.99,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Yes","offer_id":52581880103093,"sku":"QBP800127-V3","price":169.99,"currency_code":"USD","in_stock":false},{"title":"Large Vessel \/ No","offer_id":52581880135861,"sku":"QBP800127-V4","price":214.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332607_qbp800127.webp?v=1780201180"},{"product_id":"qbp692581","title":"Attwood Marine 90° P-Trap Fuel Tank Vent, Flush Mount, 5\/8 in I.D. Hose, 1-3\/8 in Install Hole, ABYC Standard","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 90° P-Trap Fuel Tank Vent is a flush mount fuel tank vent for permanently installed marine fuel systems using 5\/8\" I.D. vent hose. Its 90° P-trap layout helps keep splash water from reaching the vent line while still letting air move freely during fueling, normal running, and washdowns.\u003c\/p\u003e\u003cp\u003eThis style is a practical fit where a low profile exterior vent is needed on the hull side and where a straight hose run back to the tank is easier than forming a separate anti-siphon loop. It uses a 1-3\/8\" installation hole and is intended for hull thickness up to 1\", making the fit points easy to check before replacing an old vent or cutting a new opening.\u003c\/p\u003e\u003cp\u003eThe internal baffle and trap arrangement is made for fuel venting duty, including ABYC H-24 ventilation requirements and ISO 10088 minimum venting area requirements. The removable cover helps with inspection, debris removal, and fuel system pressure testing without replacing the whole vent assembly.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush mount 90° P-trap fuel vent for a clean hull-side installation that is less likely to snag lines, fender whips, or covers.\u003c\/li\u003e\n\u003cli\u003eFits 5\/8\" I.D. fuel vent hose, a common hose size for marine tank vent plumbing.\u003c\/li\u003e\n\u003cli\u003eRequires a 1-3\/8\" installation hole and supports hull thickness up to 1\" for straightforward fit checks during replacement or retrofit work.\u003c\/li\u003e\n\u003cli\u003eP-trap design helps reduce water entry during normal sea conditions and washdowns while still allowing the fuel tank to breathe.\u003c\/li\u003e\n\u003cli\u003eCan eliminate the need for a separate anti-siphon loop in the vent hose when installed in the correct high location above the tank.\u003c\/li\u003e\n\u003cli\u003eRemovable cover allows access for screen cleaning, vent inspection, debris removal, and fuel system pressure testing.\u003c\/li\u003e\n\u003cli\u003eAvailable with black or stainless steel vent head options to match different hull finishes and deck hardware styles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Attwood Marine fuel tank vent is offered in two vent head configurations for the same basic flush mount P-trap application.\u003c\/p\u003e\u003cp\u003eThe vent head finish changes between variants. Both configurations share the 90° P-trap layout, 5\/8\" I.D. hose fit, flush mounting style, 1-3\/8\" installation hole, and maximum 1\" hull thickness specification.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1674-1, Vent Head Black. The black vent head gives the exterior face a lower contrast look on darker hulls, black trim, or installations where the vent should visually recede.\u003c\/li\u003e\n\u003cli\u003e1674-6, Vent Head Stainless Steel. The stainless steel vent head gives the exterior face a metal finish that pairs well with stainless deck hardware, rub rails, and other exposed marine fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eInstall the vent as high as practical above the top of the fuel tank and in a location that keeps the vent opening protected from continuous spray, direct boarding water, and hull areas that sit low when the boat is loaded. The fitting should not be placed lower than the top of the fuel tank, since that can allow fuel to escape through the vent line.\u003c\/p\u003e\u003cp\u003eThe 90° outlet helps the vent hose turn inward immediately behind the hull surface, which is useful in tight sidewall cavities and other areas where depth is limited. Before installation, confirm the 5\/8\" I.D. hose size, the 1-3\/8\" cutout, available clearance behind the hull, and the maximum 1\" hull thickness.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis vent suits small powerboats, fishing boats, center consoles, runabouts, and similar vessels with permanently installed fuel tanks that need a compact flush mount vent. It is most useful where the fuel vent is exposed to rain, washdowns, and occasional spray, but still needs to breathe properly during fueling and operation.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the vent opening clear of wax buildup, salt, dirt, and insect debris so the tank can vent freely. During seasonal service or fuel system checks, remove the cover for inspection and cleaning, then confirm the vent hose remains secure, unkinked, and routed upward from the tank as intended.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Black","offer_id":52581894750389,"sku":"QBP692581-V1","price":0.0,"currency_code":"USD","in_stock":false},{"title":"Stainless Steel","offer_id":52581894783157,"sku":"QBP692581-V2","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332698_qbp692581.webp?v=1780201345"},{"product_id":"qbp294330","title":"Attwood Marine Fuel Tank \u0026 Hose Fittings, Chrome-Plated Brass","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Attwood Marine fuel tank and hose fitting range is for setting up or servicing quick-connect fuel line connections on Chrysler and small-bore Suzuki outboard fuel systems. The range includes a tank-side male fitting with a 1\/4\" NPT thread and hose-side female fittings with 3\/8\" barbs, giving boat owners and technicians the matching parts needed to connect fuel tanks and fuel lines in the correct application.\u003c\/p\u003e\u003cp\u003eThese fittings are built from chrome-plated brass and are used with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The Suzuki options apply to under-75HP small-bore applications, while the Chrysler hose fitting supports the engine end of the fuel line for Chrysler outboards.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eApplication-specific fuel fittings for Chrysler and Suzuki outboard fuel systems.\u003c\/li\u003e\n\u003cli\u003eTank-side option uses a 1\/4\" NPT thread for connection to the fuel tank.\u003c\/li\u003e\n\u003cli\u003eHose-side options use a 3\/8\" barb for fuel hose installation.\u003c\/li\u003e\n\u003cli\u003eChrome-plated brass construction supports use in marine fuel system service.\u003c\/li\u003e\n\u003cli\u003eSuzuki small-bore option is intended for engines under 75HP.\u003c\/li\u003e\n\u003cli\u003eSuitable for leaded, unleaded, ethanol-blended, and alcohol-blended fuels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product range is offered in multiple fitting configurations for Chrysler and Suzuki fuel systems.\u003c\/p\u003e\u003cp\u003eThe variants differ by engine application, fitting type, and connection style. The tank male fitting mates with the compatible hose female fittings in this range, while the hose fittings provide the 3\/8\" barb connection used at the fuel hose.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e14509-6: Chrysler and Suzuki under-75HP small-bore tank male fitting with 1\/4\" NPT thread. This option is the tank-side fitting for a threaded fuel tank connection.\u003c\/li\u003e\n\u003cli\u003e8884-6: Chrysler hose female fitting with 3\/8\" barb. This option connects the fuel hose to the Chrysler engine-side fuel connection.\u003c\/li\u003e\n\u003cli\u003e88FTS014-6: Suzuki under-75HP small-bore hose female fitting with 3\/8\" barb. This option is used on Suzuki small-bore fuel hose connections where a 3\/8\" hose barb is required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBefore installation, match the engine brand and bore application to the fitting type. The tank fitting uses a threaded 1\/4\" NPT connection, while the hose fittings use a 3\/8\" barb, so the fuel tank port, connector style, and hose inside diameter should all be checked before replacing or assembling the fuel line.\u003c\/p\u003e\u003cp\u003eUse fuel-compatible thread sealant on threaded connections and follow normal marine fuel system practices for hose clamping, leak checks, and routing. After installation, prime the fuel line and inspect the tank connection, hose barb, and engine connection for any sign of seepage before running the engine.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThese fittings are a practical match for small outboard boats, tenders, fishing skiffs, and portable fuel tank setups that use Chrysler or compatible Suzuki under-75HP small-bore fuel connections. They are also useful when replacing worn fuel connectors during routine fuel line service, especially where a loose or mismatched fitting can cause hard starting, air leaks, or fuel seepage.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Chrysler \/ Suzuki Under 75HP (Small Bore) \/ Tank Male \/ 1\/4\" NPT Thread","offer_id":52581895471285,"sku":"QBP294330-V1","price":7.99,"currency_code":"USD","in_stock":true},{"title":"Chrysler \/ Hose Female \/ 3\/8\" Barb","offer_id":52581895504053,"sku":"QBP294330-V2","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Suzuki Under 75HP (Small Bore) \/ Hose Female \/ 3\/8\" Barb","offer_id":52581895536821,"sku":"QBP294330-V3","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332737_qbp294330.webp?v=1780201359"},{"product_id":"qbp159872","title":"Attwood Marine Outboard Fuel Fittings, For Johnson\/Evinrude\/OMC","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine Fuel Tank \u0026amp; Hose Fittings is a Johnson\/Evinrude\/OMC fuel connection range for portable outboard fuel systems. The group covers the tank-side 1\/4 in NPT male fitting and matching female hose-end fittings for 5\/16 in or 3\/8 in I.D. fuel hose, so the connection can be matched to the tank outlet, fuel line size, and outboard setup.\u003c\/p\u003e\u003cp\u003eThese fittings are used to connect a portable fuel tank to an outboard fuel hose and, with the female hose fittings, to connect the hose at either the tank or engine end where the Johnson\/Evinrude\/OMC style connection is used. The tank fitting is brass, while the hose-end fittings are acetal, giving the range options for the threaded tank connection and the quick-connect hose side of the fuel line.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for Johnson, Evinrude, and OMC outboard fuel systems using the matching portable-tank and hose fitting style.\u003c\/li\u003e\n\u003cli\u003eIncludes a 1\/4 in NPT male tank fitting option for threaded tank installations.\u003c\/li\u003e\n\u003cli\u003eFemale hose fitting options cover 5\/16 in and 3\/8 in barb sizes for matching common outboard fuel hose I.D.\u003c\/li\u003e\n\u003cli\u003eQuick-connect hose fittings can be used at the tank or engine end where the matching Johnson\/Evinrude\/OMC connection is required.\u003c\/li\u003e\n\u003cli\u003eFuel fitting range is suitable for leaded, unleaded, ethanol-blended, and alcohol-blended fuels.\u003c\/li\u003e\n\u003cli\u003eBrass tank fitting and acetal hose fitting options help match the material to the specific connection point.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in three configurations for Johnson\/Evinrude\/OMC fuel line connections.\u003c\/p\u003e\u003cp\u003eThe variants differ by connection type, connection size, and material. The range includes one tank-side male fitting and two female hose-end fittings for different hose I.D. sizes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8883-6: Tank male fitting with 1\/4 in NPT thread, made from brass. This is the threaded tank-side fitting for portable fuel tanks that use the Johnson\/Evinrude\/OMC connection style.\u003c\/li\u003e\n\u003cli\u003e88FHE516-6: Female hose fitting with 5\/16 in barb, made from acetal. This option matches 5\/16 in I.D. fuel hose and can serve as the hose-end connection at the tank or engine end.\u003c\/li\u003e\n\u003cli\u003e8889LP6: Female hose fitting with 3\/8 in barb, made from acetal. This option matches 3\/8 in I.D. fuel hose and works with the corresponding tank fitting or similar compatible fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eConfirm the outboard connection style before ordering, especially on older fuel systems or boats that have had tanks, hoses, or engines changed over time. The hose barb size should match the inside diameter of the fuel hose, not the outside diameter.\u003c\/p\u003e\u003cp\u003eThreaded fuel fittings should be installed with fuel-compatible thread sealant on the threads. Hose clamps are not included, so the fuel hose installation should use clamps that match the hose size and the service environment.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis range is a practical fit for small boats, tenders, fishing skiffs, and portable-tank outboard setups using Johnson, Evinrude, or OMC fuel connections. It is also useful when replacing only one worn or mismatched fitting rather than replacing the full fuel line assembly.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Tank Male \/ 1\/4 in NPT Thread \/ Brass","offer_id":52581895667893,"sku":"QBP159872-V1","price":8.99,"currency_code":"USD","in_stock":true},{"title":"Hose Female \/ 5\/16 in Barb \/ Acetal","offer_id":52581895700661,"sku":"QBP159872-V2","price":6.99,"currency_code":"USD","in_stock":true},{"title":"Hose Female \/ 3\/8 in Barb \/ Acetal","offer_id":52581895733429,"sku":"QBP159872-V3","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332745_qbp159872.webp?v=1780201364"},{"product_id":"qbp134965","title":"Attwood Marine 90 Degree P-Trap Fuel Tank Vent Replacement Cover","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 90° P-Trap Fuel Tank Vent is a replacement cover range for Attwood P-Trap fuel tank vents used in boat fuel venting systems. These covers are meant for existing Attwood vent installations where the exterior cap or trim has been damaged, weathered, or lost, while the vent body and hose connection remain serviceable.\u003c\/p\u003e\u003cp\u003eThe matching P-Trap vent family is made for 5\/8 in. I.D. fuel vent hose and is specified to meet ABYC standard. The P-Trap layout helps keep water from reaching the fuel tank vent line during normal sea conditions and washdowns, while still allowing air to move as the tank is filled.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement cover range for Attwood 90° P-Trap fuel tank vent installations.\u003c\/li\u003e\n\u003cli\u003eHelps restore the exterior vent cover without replacing the full vent assembly when the existing body is in good condition.\u003c\/li\u003e\n\u003cli\u003eSupports the P-Trap vent layout that allows tank ventilation during fueling while helping reduce water entry through the vent path.\u003c\/li\u003e\n\u003cli\u003eAssociated with Attwood P-Trap vents for 5\/8 in. I.D. fuel vent hose.\u003c\/li\u003e\n\u003cli\u003eWorks with the vent family specified to meet ABYC standard.\u003c\/li\u003e\n\u003cli\u003eAvailable in configurations for different existing Attwood vent cover styles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two replacement cover configurations. The correct choice depends on the Attwood vent already installed on the boat, so the existing vent body, cover shape, and visible trim should be checked before ordering.\u003c\/p\u003e\u003cp\u003eThe two listings separate the replacement by mount style and by the original Attwood vent model. Part 911526-1 is tied to the 1670 P-Trap vent, while part 911528-1 is tied to the 66419 P-Trap vent with stainless steel trim cover.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e911526-1, Mount Style Standard: black replacement cover for the Attwood 1670 P-Trap fuel tank vent. This suits installations where the existing black exterior cover needs to be renewed while the standard vent body remains in place.\u003c\/li\u003e\n\u003cli\u003e911528-1, Mount Style Flush: stainless steel replacement cover kit associated with the Attwood 66419 P-Trap fuel tank vent. This keeps the stainless trim appearance at the vent opening and should be matched to the existing Attwood vent body before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eBecause these are replacement covers, fit is driven by the existing Attwood vent model rather than by hose size alone. Before installation, compare the old cover and vent body with the selected replacement part, and confirm that the fuel vent assembly itself is not cracked, loose, or damaged.\u003c\/p\u003e\u003cp\u003eFor boats used in saltwater, exposed slips, or washdown-heavy fishing use, the vent cover is a small part that still matters. A missing or damaged cover can leave the vent opening more exposed, so replacement should be handled before regular spray, rain, or deck washdowns become a problem.\u003c\/p\u003e\u003ch6\u003eInstallation and care\u003c\/h6\u003e\u003cp\u003eInstall the replacement cover with the fuel system area well ventilated and away from ignition sources. If the old cover failed because of impact, corrosion around surrounding hardware, or movement in the vent body, inspect the hose, clamps, and mounting area before putting the boat back into service.\u003c\/p\u003e\u003cp\u003eRoutine cleaning with fresh water helps remove salt and deck grime from the vent area. Avoid sealing or coating over the vent opening, since the tank still needs clear air movement during fueling and normal operation.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Standard","offer_id":52581902647477,"sku":"QBP134965-V1","price":7.22,"currency_code":"USD","in_stock":false},{"title":"Flush","offer_id":52581902680245,"sku":"QBP134965-V2","price":23.66,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332923_qbp134965.webp?v=1780201436"},{"product_id":"qbp406247","title":"Attwood Marine Fuel Tank and Hose Fittings, For Mercury\/Mariner","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Attwood Marine Mercury\/Mariner fuel tank and hose fitting range is for connecting portable fuel tanks and fuel hoses on Mercury and Mariner outboard fuel systems. The range covers the two sides of the connection: a 1\/4\" NPT tank male fitting in brass and a 3\/8\" barb hose female fitting in acetal.\u003c\/p\u003e\u003cp\u003eThese fittings are small parts, but they matter when setting up or servicing an outboard fuel line. They help create the connection point between the tank and hose assembly, so they are most relevant when replacing a worn fitting, building a new portable tank setup, or matching a hose end to an existing Mercury or Mariner fuel tank connection.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for Mercury and Mariner outboard fuel tank and hose connections.\u003c\/li\u003e\n\u003cli\u003eAvailable as a tank-side 1\/4\" NPT male fitting or a hose-side 3\/8\" barb female fitting.\u003c\/li\u003e\n\u003cli\u003eBrass tank fitting option suits threaded fuel tank installations where a 1\/4\" NPT connection is required.\u003c\/li\u003e\n\u003cli\u003eAcetal hose fitting option works with 3\/8\" inside diameter fuel hose and a proper fuel hose clamp.\u003c\/li\u003e\n\u003cli\u003eSuitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels.\u003c\/li\u003e\n\u003cli\u003eUseful for portable tank setups, fuel hose replacement, and routine outboard fuel system service.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two configurations for different connection points in a Mercury or Mariner outboard fuel system.\u003c\/p\u003e\u003cp\u003eThe part that changes between variants is the fitting style: one option is the tank-side threaded connector and the other is the hose-side barbed connector. Material also changes by configuration, with brass used on the tank fitting and acetal used on the hose fitting.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8873-6: Connection Type 1\/4\" NPT Thread, End Type Tank Male, Material Brass. This version installs at the fuel tank connection point where a 1\/4\" NPT male tank fitting is needed.\u003c\/li\u003e\n\u003cli\u003e8890LP6: Connection Type 3\/8\" Barb, End Type Hose Female, Material Acetal. This version attaches to 3\/8\" inside diameter fuel hose and serves as the hose-side female fitting for the tank connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eMatch the fitting to the side of the system being serviced before ordering. The 8873-6 fitting is for the tank side with a 1\/4\" NPT threaded connection, while the 8890LP6 fitting is for the hose side where a 3\/8\" barb is needed.\u003c\/p\u003e\u003cp\u003eFor threaded fuel fittings, use a fuel-compatible thread sealant and avoid over-tightening into the tank fitting boss. For the barbed hose fitting, use fuel hose of the correct inside diameter and secure it with a proper fuel hose clamp. After installation, prime the fuel line and check the connection for leaks before running the engine.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThese fittings are a practical match for boaters maintaining portable outboard fuel systems on fishing boats, small runabouts, tenders, and other Mercury or Mariner-powered boats. They are especially useful when an old quick-connect fitting no longer locks cleanly, the hose end has been changed, or a spare fuel tank needs to match the existing hose assembly.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"1\/4\" NPT Thread \/ Tank Male \/ Brass","offer_id":52581909004469,"sku":"QBP406247-V1","price":10.99,"currency_code":"USD","in_stock":true},{"title":"3\/8\" Barb \/ Hose Female \/ Acetal","offer_id":52581909037237,"sku":"QBP406247-V2","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332990_qbp406247.webp?v=1780201460"},{"product_id":"qbp724138","title":"Perko 0506 Gas Tank Vent, 5\/8 in Hose, Chrome-Plated Zinc Alloy, Polymer Splash Guard","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 0506 Gas Tank Vent is a straight body vent fitting for gasoline fuel tank ventilation on boats. It uses a chrome plated zinc alloy body with a polymer splash guard, and it connects to 5\/8 inch hose for the tank vent line.\u003c\/p\u003e\u003cp\u003eThis vent includes a removable 30 mesh stainless steel wire screen flame arrestor for fuel applications, giving installers access for inspection and cleaning when needed. It fits hull thicknesses up to 3\/4 inch, which makes it a practical replacement for many small boat, runabout, fishing boat, and cruiser fuel vent locations.\u003c\/p\u003e\u003cp\u003eThe splash guard helps reduce water entry at the hull vent opening, especially where the vent is exposed to spray, rain, or washdowns. The range is offered with either a black or white polymer splash guard so the visible exterior detail can better match the hull, trim, or nearby hardware.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStraight body gas tank vent for marine fuel tank ventilation.\u003c\/li\u003e\n\u003cli\u003eAccepts 5\/8 inch vent hose, a common size for boat fuel vent plumbing.\u003c\/li\u003e\n\u003cli\u003eFits hull installations up to 3\/4 inch thick.\u003c\/li\u003e\n\u003cli\u003eChrome plated zinc alloy body with a polymer splash guard at the exterior opening.\u003c\/li\u003e\n\u003cli\u003eRemovable 30 mesh stainless steel wire screen flame arrestor for gasoline fuel applications.\u003c\/li\u003e\n\u003cli\u003eMeets USCG safety standards for gasoline fuel systems under 33 CFR 183.\u003c\/li\u003e\n\u003cli\u003eAvailable with a black or white splash guard to suit the surrounding hull finish and hardware layout.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Perko gas tank vent is offered in two configurations. Both use the same 0506 vent format, with the visible splash guard color as the key difference between the variants.\u003c\/p\u003e\u003cp\u003eThe hose size, maximum hull thickness, body construction, and removable 30 mesh stainless steel flame arrestor remain consistent across these configurations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0506DP4CHR: Chrome finish with black polymer splash guard. The black guard is a good visual match near dark rub rails, black trim, or darker hull details.\u003c\/li\u003e\n\u003cli\u003e0506DP4WHT: Chrome finish with white polymer splash guard. The white guard blends more naturally on white hulls, transoms, and cockpit side panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eInstall this vent where the fuel tank vent line can run without low spots that trap fuel or water. The 5\/8 inch hose connection should be matched with approved marine fuel vent hose and secured with suitable clamps for the vessel’s fuel system layout.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm the existing vent hose inside diameter, the hull thickness at the mounting point, and the available clearance behind the hull. This is especially important on older boats where the original vent may have been bedded heavily or installed close to liners, flotation, wiring, or deck hardware.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis vent is a good fit for boats that need a clean exterior fuel vent replacement with a splash guard and a serviceable screen. It suits exposed hull side installations where spray protection and access for routine inspection both matter.\u003c\/p\u003e\u003cp\u003eDuring seasonal maintenance, check that the screen is clean and that the vent opening is free of wax, salt, insects, and debris. A clear vent path helps the fuel tank breathe properly during filling and engine operation.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Chrome with Black Polymer Splash Guard","offer_id":52581971493045,"sku":"QBP724138-V1","price":26.32,"currency_code":"USD","in_stock":true},{"title":"Chrome with White Polymer Splash Guard","offer_id":52581971525813,"sku":"QBP724138-V2","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1334845_qbp724138.webp?v=1780201915"},{"product_id":"qbp979089","title":"Perko 1270 Style Replacement Deck Fill Cap, O-Ring, Retainer","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 1270 Style Replacement Cap is a polymer replacement cap for Perko Figure No. 1270 fuel and water deck fills. It is made for boats that already use the 1270 fill style and need a correct replacement cap for gas, diesel, or water service.\u003c\/p\u003e\u003cp\u003eThis cap range is non-vented and includes the matching cap type marking, so the deck fill remains easy to identify during fueling or water fill-ups. Each configuration is supplied with an O-ring and retainer, which helps keep the cap sealed and attached at the fill point during normal use on deck.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePolymer cap for Perko Figure No. 1270 fuel and water fills.\u003c\/li\u003e\n\u003cli\u003eAvailable in gas, diesel, and water versions so the cap marking matches the deck fill service.\u003c\/li\u003e\n\u003cli\u003eNon-vented 1270-style cap for use with the correct matching fill and system layout.\u003c\/li\u003e\n\u003cli\u003eIncludes an O-ring and retainer for a proper cap replacement at the deck fill.\u003c\/li\u003e\n\u003cli\u003ePractical spare for boats where the original fill cap is worn, missing, cracked, or hard to secure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis replacement cap is offered in multiple configurations for different fill services on board.\u003c\/p\u003e\u003cp\u003eThe service marking changes by variant, while the 1270 replacement cap style, polymer cap construction, O-ring, and retainer remain consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1270DPG99A: Gas cap. This version is marked for gasoline deck fills and should be matched only to the appropriate Perko 1270 gas fill, not to an EPA-compliant sealed fuel system.\u003c\/li\u003e\n\u003cli\u003e1270DPD99A: Diesel cap. This version is marked for diesel deck fills, helping separate fuel types clearly at the deck fitting.\u003c\/li\u003e\n\u003cli\u003e1270DPW99A: Water cap. This version is marked for water fills, making it easier to distinguish potable water access from fuel fill points.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eUse this cap only as a replacement for the Perko 1270 fill style. The part should match the existing cap type on the boat, including the service marking and the non-vented configuration. For gas installations, confirm that the vessel uses the compatible non-EPA fill style before replacing the cap.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward when the existing deck fill is already a Perko 1270 style. Remove the damaged or missing cap assembly, check that the fill neck and sealing surface are clean, and fit the replacement cap with its O-ring and retainer in place. A clean sealing surface matters on deck, where spray, washdowns, fuel residue, and dirt can affect how the cap seats.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis cap is a good match for boat owners, service yards, and marine technicians replacing a lost or worn cap on an existing Perko 1270 deck fill. It is especially useful as a spare aboard cruising boats, fishing boats, and workboats where a missing fill cap can quickly become a water intrusion or contamination problem.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the cap area with fresh water after saltwater exposure and check the O-ring periodically for wear, flattening, or cracking. Replace the cap if it no longer tightens correctly, if the retainer is damaged, or if the service marking is no longer readable.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement cap\u003c\/li\u003e\n\u003cli\u003eO-ring\u003c\/li\u003e\n\u003cli\u003eRetainer\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Perko","offers":[{"title":"Gas","offer_id":52581974245557,"sku":"QBP979089-V1","price":30.48,"currency_code":"USD","in_stock":true},{"title":"Diesel","offer_id":52581974278325,"sku":"QBP979089-V2","price":0.0,"currency_code":"USD","in_stock":false},{"title":"Water","offer_id":52581974311093,"sku":"QBP979089-V3","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1334870_qbp979089.webp?v=1780201928"},{"product_id":"qbp180430","title":"Perko Fuel Fill with Locking Cap, 1-1\/2 in Hose, Chrome-Plated Bronze Flange","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 0599 is a locking deck fuel fill for 1-1\/2 inch fuel hose, offered with gas or diesel deck markings. It gives the deck fill point a locking cap, a marked chrome flange, and a black plastic body for installations where the fuel fill needs to be easy to identify and harder to open without the key.\u003c\/p\u003e\u003cp\u003eThis fill uses a chrome-plated zinc alloy flange, black plastic cap with strap, cap retainer and gasket, and an included grounding screw. Key installation dimensions include a 3-3\/8 inch outside flange diameter, 3-1\/8 inch neck length, 2-1\/8 inch mounting hole diameter, and #8 mounting screws.\u003c\/p\u003e\u003cp\u003eIt is a practical fit for replacing or adding a deck fuel fill on boats with a 1-1\/2 inch fuel fill hose, especially where a locking cap is preferred at the deck. For gasoline installations, this style is not for fuel systems that require 40 CFR 1060 evaporative emissions compliant deck fills.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAccepts 1-1\/2 inch fuel fill hose, a common size for boat deck fill plumbing.\u003c\/li\u003e\n\u003cli\u003eLocking cap helps limit casual access to the fuel fill while the boat is docked or stored.\u003c\/li\u003e\n\u003cli\u003eChrome-plated zinc alloy flange gives the deck opening a finished appearance.\u003c\/li\u003e\n\u003cli\u003eBlack plastic body and black plastic cap with strap keep the cap attached at the fill point during fueling.\u003c\/li\u003e\n\u003cli\u003eGrounding screw is included for proper bonding during installation.\u003c\/li\u003e\n\u003cli\u003eCap retainer and gasket are part of the fill assembly for a cleaner deck installation.\u003c\/li\u003e\n\u003cli\u003e2-1\/8 inch mounting hole diameter and #8 screw size help confirm fit before cutting or replacing an existing fill.\u003c\/li\u003e\n\u003cli\u003eLocking cap includes a cover over the key hole to help keep spray and dirt away from the lock opening.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Perko 0599 fuel fill is offered in two marked versions for matching the deck fill to the fuel carried on board.\u003c\/p\u003e\u003cp\u003eThe hose size, main installation dimensions, locking cap style, and basic construction are consistent across these two configurations. The marking changes so the fill is clearly identified as gas or diesel at the deck.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0599DPGCHR: Marked for gas. This version is used where the deck fill needs a gasoline marking at the fuel inlet.\u003c\/li\u003e\n\u003cli\u003e0599DPDCHR: Marked for diesel. This version is used where the deck fill needs a diesel marking at the fuel inlet.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore installation, confirm that the boat uses 1-1\/2 inch fuel fill hose and that the available deck area can accept the 3-3\/8 inch flange. The 3-1\/8 inch neck length should also be checked against the deck thickness and the hose routing below the fill.\u003c\/p\u003e\u003cp\u003eThe 2-1\/8 inch mounting hole diameter is useful when replacing an existing fill, since it helps determine whether the new unit will cover the original opening cleanly. Use the included grounding screw as part of the boat’s fuel fill bonding setup, following the vessel builder’s wiring and fuel system practices.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis fill suits boats where the fuel inlet is exposed on deck, in the cockpit, or along a side deck and the owner wants a cap that locks without changing the standard 1-1\/2 inch hose connection. The marked flange also helps reduce confusion during fueling, especially on boats where gas, diesel, water, and waste deck fills are located close together.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Gas","offer_id":52581975130293,"sku":"QBP180430-V1","price":110.05,"currency_code":"USD","in_stock":true},{"title":"Diesel","offer_id":52581975163061,"sku":"QBP180430-V2","price":104.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1334881_qbp180430.webp?v=1780201937"},{"product_id":"qbp861496","title":"Perko 0543 Vented Deck Fill, 1-1\/2 in Hose, Straight Neck, 5\/8 in Vent Hose","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 0543 is a vented straight-neck deck fill for 1-1\/2\" fill hose, built for boat fuel or water fill locations where the fill and vent need to be handled at the deck fitting. It uses a black polymer body with a polymer cap, an integral tank vent, a black polymer cap strap, and a straight neck that suits installations where the hose can run directly below the deck plate.\u003c\/p\u003e\u003cp\u003eThis fill is sized for 1-1\/2\" fill hose and 5\/8\" vent hose. Key installation dimensions include a 3-5\/8\" outside flange, 2-7\/16\" neck length, 2-1\/8\" mounting hole diameter, and #8 screw size, giving installers the measurements needed before cutting or replacing an existing deck fill.\u003c\/p\u003e\u003cp\u003eThe gas-marked versions include a flame arrestor and anti-surge valve as part of the integral tank vent. For gasoline fuel systems, this series meets U.S.C.G. Safety Standards, 33 CFR 183, but it is not built to meet 40 CFR 1060 subpart B emissions requirements.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eVented deck fill layout combines the fill opening and tank vent at one deck location, helping simplify older fuel or water fill installations that use this style of fitting.\u003c\/li\u003e\n\u003cli\u003eFits 1-1\/2\" fill hose and 5\/8\" vent hose, two critical sizes to confirm before replacing an existing deck fill.\u003c\/li\u003e\n\u003cli\u003eStraight neck works well where there is clear space below the deck plate for a direct hose run.\u003c\/li\u003e\n\u003cli\u003eBlack polymer body with black polymer strap keeps the cap attached during fueling, filling, and routine deck access.\u003c\/li\u003e\n\u003cli\u003eNo ground wire is required, which can reduce installation complexity when replacing a compatible non-metallic fill.\u003c\/li\u003e\n\u003cli\u003eGas and water markings are available, with cap color options that help match the deck layout and reduce mix-ups at the fill point.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Perko 0543 fill is offered in separate configurations for gas and water service, with the visible marking and cap color changing by variant.\u003c\/p\u003e\u003cp\u003eThe 1-1\/2\" fill hose size, 5\/8\" vent hose size, straight neck layout, black polymer body, black polymer strap, and main installation dimensions remain consistent across these listed configurations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0543DPGBLK: Marked for gas with a black cap. This version suits gasoline fill locations where a black cap matches the deck hardware or surrounding finish.\u003c\/li\u003e\n\u003cli\u003e0543DPGWHT: Marked for gas with a white cap. This version keeps the gas marking while using a white cap for boats with lighter deck fittings or cockpit trim.\u003c\/li\u003e\n\u003cli\u003e0543DPWBLK: Marked for water with a black cap. This version separates the water fill point from fuel fills through its water marking while keeping the same black cap appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore installation, check the available space under the deck because the straight neck needs room for the fill hose to run without a hard bend. The 2-1\/8\" mounting hole diameter and 3-5\/8\" outside flange are the main deck measurements to compare against the existing opening or the planned cutout.\u003c\/p\u003e\u003cp\u003eUse hose and clamps appropriate for the tank system being connected. For fuel installations, the vent hose connection, flame arrestor, and anti-surge valve should be treated as part of the fuel system layout, not just as deck hardware.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis fill is a practical match for small powerboats, fishing boats, and other vessels using a traditional vented deck fill with a 1-1\/2\" fill hose. It is most useful when replacing a worn deck fill or setting up a straightforward tank access point where the service marking, cap color, hose size, and mounting dimensions all match the boat.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Gas \/ Black","offer_id":52581977292981,"sku":"QBP861496-V1","price":55.11,"currency_code":"USD","in_stock":true},{"title":"Gas \/ White","offer_id":52581977325749,"sku":"QBP861496-V2","price":0.0,"currency_code":"USD","in_stock":false},{"title":"Water \/ Black","offer_id":52581977358517,"sku":"QBP861496-V3","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1334941_qbp861496.webp?v=1780201964"},{"product_id":"qbp185213","title":"Perko 1428 Sealed Flip Top Fuel Fill, 1-1\/2 in Hose, 35° Angled Neck, VPR","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 1428 is an EPA compliant sealed flip top fuel fill for 1-1\/2 inch fuel fill hose, made with a 35° angled neck and an integrated vent path for marine fuel systems. It uses a flip top cap with vacuum pressure relief and includes an integral tank vent with flame arrestor, which helps keep the deck hardware layout simpler on compatible installations.\u003c\/p\u003e\u003cp\u003eThe angled neck is useful where the fuel hose needs to leave the fill at an angle under a side deck, gunwale, splashwell, or cockpit sole. The fill works with 5\/8 inch vent hose and has a 2-7\/16 inch neck length, giving installers clear fit points to check before replacing an older deck fill or planning a new fuel fill location.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 1-1\/2 inch fuel fill hose and 5\/8 inch vent hose.\u003c\/li\u003e\n\u003cli\u003e35° angled neck helps the hose route away from the fill in tight or sloped deck areas.\u003c\/li\u003e\n\u003cli\u003eFlip top cap includes vacuum pressure relief for EPA compliant fuel system layouts.\u003c\/li\u003e\n\u003cli\u003eIntegral tank vent with flame arrestor supports installations that use a vented fuel fill arrangement.\u003c\/li\u003e\n\u003cli\u003eNo deck plate key or ground wire is required for normal installation.\u003c\/li\u003e\n\u003cli\u003ePolymer body is available in black or white to match surrounding deck hardware and trim.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Perko 1428 fuel fill is offered in two color configurations for matching different deck and cockpit layouts.\u003c\/p\u003e\u003cp\u003eThe confirmed difference between the variants is color. The 35° angled neck, 1-1\/2 inch fuel fill hose fit, 5\/8 inch vent hose fit, vacuum pressure relief cap, integral tank vent with flame arrestor, and 2-7\/16 inch neck length remain the same across both versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1428G00BLK: Color Black. The black version suits darker deck hardware, black consoles, and installations where the fill should blend into darker trim.\u003c\/li\u003e\n\u003cli\u003e1428G00WHT: Color White. The white version works well on light gelcoat decks, cockpit soles, and other areas where matching white hardware gives a cleaner appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore installation, confirm that the deck location has room for the 35° hose exit and that the fuel fill hose can run without kinking below the mounting surface. This is especially important on smaller boats, center consoles, and cockpit areas where the underside of the deck may have limited clearance.\u003c\/p\u003e\u003cp\u003eUse the stated hose sizes when checking compatibility with an existing fuel system. The integrated vent and no ground wire requirement can simplify the hardware layout, but the boat's fuel system routing, venting arrangement, and applicable marine installation practices still need to be followed.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis fuel fill is a practical fit for builders and boat owners replacing an EPA compliant deck fuel fill with a flip top cap, pressure relief, and an angled hose connection. It is best suited to installations where the hose path benefits from an angled neck rather than a straight drop below the cap.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Black","offer_id":52581978144949,"sku":"QBP185213-V1","price":0.0,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":52581978177717,"sku":"QBP185213-V2","price":66.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1334958_qbp185213.webp?v=1780201978"},{"product_id":"qbp833858","title":"Perko 0561 Gas Tank Vent with Swivel Elbow, 5\/8 in Hose, 1 in Max Hull, 30 Mesh SS Flame Arrestor","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 0561 is a gas tank vent with a swivel 90 degree elbow for venting a marine fuel tank through the hull. It is made for 5\/8 inch vent hose and fits hull thicknesses up to 1 inch, which makes it a practical replacement or new-install vent on many small boats, center consoles, cruisers, and utility vessels.\u003c\/p\u003e\u003cp\u003eThe unit pairs a chrome-plated zinc alloy cap with a zinc alloy elbow and a polymer splash guard. The elbow can be rotated to any position, so the vent hose can be routed cleanly behind the hull side instead of being forced into an awkward bend.\u003c\/p\u003e\u003cp\u003eA removable 30 mesh stainless steel wire screen works as a flame arrestor for fuel applications. That detail matters on gasoline fuel systems, where the vent needs to breathe properly while still using hardware suited to the fuel environment.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAccepts 5\/8 inch fuel vent hose, a common hose size for marine gas tank vent lines.\u003c\/li\u003e\n\u003cli\u003eFits installations through hull material up to 1 inch thick.\u003c\/li\u003e\n\u003cli\u003eSwivel 90 degree elbow can be rotated to any position for cleaner hose routing behind the mounting surface.\u003c\/li\u003e\n\u003cli\u003eChrome-plated zinc alloy cap gives the exposed side a finished look on the hull.\u003c\/li\u003e\n\u003cli\u003eZinc alloy elbow body handles the angled connection inside the boat.\u003c\/li\u003e\n\u003cli\u003ePolymer splash guard helps manage water exposure at the vent opening.\u003c\/li\u003e\n\u003cli\u003eRemovable 30 mesh stainless steel wire screen functions as a flame arrestor for fuel use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Perko gas tank vent is offered in two configurations that share the same basic vent style, swivel elbow layout, 5\/8 inch hose connection, and 1 inch maximum hull thickness.\u003c\/p\u003e\u003cp\u003eThe difference between the variants is the splash guard color. Both use a chrome finish at the exposed cap, so the choice mainly affects how the vent looks against the hull or trim around the fuel vent location.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0561DP4CHR: Chrome finish with black polymer splash guard. The black guard gives the vent a darker accent, often a natural fit near black rub rail, dark hull graphics, or black deck hardware.\u003c\/li\u003e\n\u003cli\u003e0561DP4WHT: Chrome finish with white polymer splash guard. The white guard has a lighter look that blends well on white hulls or cleaner topside layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis vent is intended for a hull-side fuel tank vent line using 5\/8 inch hose. The swivel elbow is useful when space is tight behind the mounting point, since the hose can leave the fitting in the direction that works best for the boat’s layout.\u003c\/p\u003e\u003cp\u003eDuring installation, the vent hose should be routed so it rises and drains properly according to the vessel’s fuel system layout, with no low spots that can trap fuel or water. The 1 inch maximum hull thickness should be checked before installation, especially on cored hull sides or areas with interior liners.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boat owners replacing a damaged or aging gas tank vent, as well as builders or refit projects that need a compact vent fitting with a 90 degree inside connection. It suits exposed hull locations where the outside cap needs a finished chrome appearance and the inside hose routing benefits from an adjustable elbow.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Chrome with Black Polymer Splash Guard","offer_id":52581978734773,"sku":"QBP833858-V1","price":27.64,"currency_code":"USD","in_stock":true},{"title":"Chrome with White Polymer Splash Guard","offer_id":52581978767541,"sku":"QBP833858-V2","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1334980_qbp833858.webp?v=1780201990"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/fuel-vents-fills.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}