{"title":"Fixed Mount GPS Connectors","description":"","products":[{"product_id":"qbp832778","title":"ACR Electronics - Exposure OLAS Multi-Engine Connector","description":"\u003ch4\u003eSeamless Multi-Engine Safety Integration\u003c\/h4\u003e\u003cp\u003eThe ACR Exposure OLAS Multi-Engine Connector is a crucial component designed to ensure enhanced safety for boats with multiple outboard engines. This accessory allows seamless integration of up to three engines into a single kill switch system, ensuring synchronized engine shutdown in case of an emergency. Specifically engineered for compatibility with the OLAS N2K NMEA 2000 Wireless Engine Kill Switch and Man Overboard Alarm System, as well as the OLAS Guardian Wireless Engine Kill Switch and Man Overboard Alarm System, it enhances safety on the water without compromising convenience.\u003c\/p\u003e\u003ch4\u003eDesigned for Multi-Engine Boats\u003c\/h4\u003e\u003cp\u003eThe OLAS Multi-Engine Connector is particularly beneficial for vessels equipped with twin or triple Yamaha outboard engines, allowing a streamlined connection to a unified safety system. This design provides boaters with peace of mind, knowing that in the event of a man-overboard situation or an emergency, all connected engines will immediately shut down, preventing further hazards.\u003c\/p\u003e\u003ch4\u003eKey Features and Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Up to Three Engines\u003c\/strong\u003e – Designed to integrate multiple outboard engines into a single kill switch system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized for Yamaha Outboards\u003c\/strong\u003e – Commonly used on Yamaha twin and triple engine boats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks with OLAS Safety Systems\u003c\/strong\u003e – Fully compatible with the OLAS N2K NMEA 2000 and OLAS Guardian Wireless Engine Kill Switch and Man Overboard Alarm System.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Safety and Control\u003c\/strong\u003e – Provides a unified engine shutdown mechanism for increased security on the water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable Marine-Grade Design\u003c\/strong\u003e – Built to withstand harsh marine environments, ensuring long-lasting performance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACR Electronics","offers":[{"title":"Default Title","offer_id":52023681155253,"sku":"QBP832778","price":51.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1224401_qbp832778.png?v=1763257613"},{"product_id":"qbp994562","title":"Airmar - Inline IP67 10 Conductor Waterproof Cable Splice Kit","description":"\u003ch4\u003eSecure and Waterproof In-Line Cable Splicing Solution\u003c\/h4\u003e\u003cp\u003eThis Airmar 10-Conductor In-Line Splice is designed to provide a reliable and waterproof connection for marine applications. Featuring an IP67 waterproof rating, it ensures protection against water and dust intrusion, making it ideal for exposed environments such as engine rooms, bilges, and sailboat masts. The integrated cable gland offers strain relief, maintaining a secure connection even in harsh conditions.\u003c\/p\u003e\u003cp\u003eUnlike traditional splicing methods, this in-line splice enables quick and efficient installation without the need for soldering. The screw terminal connections allow for easy field servicing, reducing downtime and simplifying maintenance. This makes it an essential accessory for integrating CHIRP transducers and other marine electronics requiring a secure, watertight connection.\u003c\/p\u003e\u003ch4\u003eDurable and Marine-Grade Construction\u003c\/h4\u003e\u003cp\u003eConstructed from high-quality nylon, this splice kit is built to withstand extreme conditions. The robust design ensures long-lasting durability, making it suitable for use in challenging marine environments.\u003c\/p\u003e\u003ch4\u003eKey Technical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Rating\u003c\/strong\u003e: IP67, ensuring protection against water and dust\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Durable nylon construction for marine-grade reliability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range\u003c\/strong\u003e: -40°C to 100°C, designed for extreme environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Compatibility\u003c\/strong\u003e: Supports wire sizes ranging from 18AWG to 22AWG\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eEnhanced Connection Reliability\u003c\/h4\u003e\u003cp\u003eThe integrated cable gland not only ensures a watertight connection but also provides essential strain relief, preventing damage from movement or tension. This feature is particularly beneficial in dynamic marine settings where cables are frequently exposed to vibration and environmental stressors.\u003c\/p\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFully waterproof in-line splice with IP67 rating\u003c\/li\u003e\n\u003cli\u003eSolderless screw terminal connections for easy installation and servicing\u003c\/li\u003e\n\u003cli\u003eIntegrated cable gland for strain relief and added durability\u003c\/li\u003e\n\u003cli\u003eIdeal for CHIRP transducer installations and marine electronics integration\u003c\/li\u003e\n\u003cli\u003eSuitable for exposed, high-moisture environments such as bilges and masts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Airmar in-line splice kit offers a simple yet highly effective solution for secure cable connections in marine applications, ensuring both performance and longevity in demanding conditions.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":52023777198261,"sku":"QBP994562","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1227247_qbp994562.png?v=1763258380"},{"product_id":"qbp369841","title":"Garmin Split Collar Cable Connector, 11 mm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11170-01 is a split connector collar for 11 mm Garmin cables that lets you route wiring through a smaller pass-through instead of drilling a large hole to fit the plug.\u003c\/p\u003e\u003cp\u003eIt is used on Garmin installations that rely on a threaded locking collar connection, including threaded RJ45-style network leads and other Garmin cables that secure with threads at the device end. Because the collar is split, you can pull the cable first and assemble the collar afterward, which is helpful on refits and tight helm layouts.\u003c\/p\u003e\u003cp\u003eConfirm fit by checking that your cable jacket measures about 11 mm where the collar will sit and that the mating connection uses a threaded lock. If the connector is a friction-fit style with no threads, this collar will not attach.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e11 mm split collar format to keep cable pass-through holes smaller\u003c\/li\u003e\n\u003cli\u003eThreaded locking collar style for Garmin connections that secure with threads\u003c\/li\u003e\n\u003cli\u003eSplit construction allows assembly after the cable has been routed\u003c\/li\u003e\n\u003cli\u003eUseful replacement when the original collar is missing, cracked, or stripped\u003c\/li\u003e\n\u003cli\u003eBlack finish that blends in behind the dash and inside conduits\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit depends on two things: cable outside diameter and the connector locking style. This part matches Garmin cables that use an 11 mm collar and a threaded lock at the connection point. It is not meant for friction-fit connectors that do not have a threaded port to screw onto.\u003c\/p\u003e\u003cp\u003eOn mixed electronics systems, it is worth checking each cable run individually. Some boats have a combination of threaded and non-threaded Garmin leads depending on the device generation and cable type.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the cable through the bulkhead, panel, or rigging tube first, then assemble the split collar around the cable jacket. Once assembled, thread the collar onto the matching threaded connection and hand-tighten until it seats.\u003c\/p\u003e\u003cp\u003eFor installations exposed to washdowns or spray, treat the pass-through like any other deck or bulkhead penetration: seal the cutout appropriately and add strain relief so vibration and cable weight are not carried by the connector.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis collar is commonly used when running Garmin network or transducer cabling behind the helm, through console rigging, or across a bulkhead where you want to keep hole sizes down. It is a good match for boats with limited access behind the panel where pulling a large connector through the structure would be difficult.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52268968214709,"sku":"QBP369841","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298801_qbp369841.jpg?v=1771541121"},{"product_id":"qbp998956","title":"Garmin Field-Installable Mast Connectors, Male\/Female, Water Resistant, For gWind Transducers","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12117-01 is a field-installable male\/female connector set with a water-resistant seal, used at the foot of the mast to disconnect gWind wind transducer cabling when stepping or unstepping the mast.\u003c\/p\u003e\u003cp\u003eIt gives you a clean break in the mast run so the spar can come down without pulling the full cable through deck hardware or leaving loose wires exposed. That can make winter storage, trailering, and rigging work much easier on the mast wiring.\u003c\/p\u003e\u003cp\u003eCompatibility covers the GND 10 Black Box Bridge and the gWind Race Transducer, gWind Transducer, and gWind Wireless Transducer.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCreates an accessible disconnect point at the mast base for gWind mast cabling\u003c\/li\u003e\n\u003cli\u003eWater-resistant connection suited to the spray and washdown area around the mast step\u003c\/li\u003e\n\u003cli\u003eField-installable format for installs where the mast cable is cut and terminated on the boat\u003c\/li\u003e\n\u003cli\u003eSupports routine mast pulling without repeatedly cutting and re-terminating the wind sensor wiring\u003c\/li\u003e\n\u003cli\u003eWorks across common Garmin sailing wind setups that use gWind transducers and a GND 10 bridge\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the join where you can reach it during mast work and where it is protected from standing water. Support the cable on both sides of the connector so the joint is not carrying the weight of the mast run, and leave slack for mast movement.\u003c\/p\u003e\u003cp\u003eAfter re-connecting, check that the coupling is fully seated and keep the contact faces clean. A mast boot or cover over the area helps reduce UV and direct washdown exposure on deck-level installs.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis connector set is for Garmin sailing wind sensor cabling. It is not the same part as the field-installable connectors used to build NMEA 2000 drop or backbone cables.\u003c\/p\u003e\u003cp\u003eFit is straightforward when your boat is already wired for the gWind mast cable connection. If your wind system uses a different transducer or cabling standard, use the matching connector family for that system.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eField-installable male connector\u003c\/li\u003e\n\u003cli\u003eField-installable female connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269040500917,"sku":"QBP998956","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298967_qbp998956.jpg?v=1771541565"},{"product_id":"qbp477612","title":"Garmin NMEA 2000 T-Connector, 10-Pack, 45-Degree Offset","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11078-00CASE is a 10-pack of NMEA 2000 T-connectors used to add devices to a NMEA 2000 backbone.\u003c\/p\u003e\u003cp\u003eEach T-connector installs inline on the backbone and gives you one drop connection point for a display, sensor, gateway, or other NMEA 2000 node. This revised body is offset by 45 degrees, which helps when space is tight behind a helm, inside a console, or in a rigging chase where straight connectors can force a hard cable bend.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10-pack of NMEA 2000 T-connectors for building out a network or keeping spares for service work.\u003c\/li\u003e\n\u003cli\u003e45-degree offset body for better clearance behind panels and cleaner cable routing in crowded installs.\u003c\/li\u003e\n\u003cli\u003eStandard NMEA 2000 Micro-C style connectors to match common backbone and drop cables.\u003c\/li\u003e\n\u003cli\u003eOne device port per T-connector for tying in electronics without breaking the backbone layout.\u003c\/li\u003e\n\u003cli\u003eSupports proper linear backbone construction where each device connects through its own T-connector.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003e10 NMEA 2000 T-connectors\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis connector is for NMEA 2000 networks that use Micro-C style cabling. It is meant for plug-in NMEA 2000 backbone and drop connections, not bare-wire splices or NMEA 0183 wiring.\u003c\/p\u003e\u003cp\u003eOn most boats, these are mounted behind the dash, inside the console, or in a dry wiring run where the backbone is supported and strain on connectors is kept low.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall a T-connector where you need a new connection point by separating the backbone at that spot and inserting the T inline. Connect the device drop cable to the remaining port and secure the backbone so vibration does not work the connectors loose over time.\u003c\/p\u003e\u003cp\u003eA clean NMEA 2000 layout keeps terminators at the two ends of the backbone and avoids leaving any connector open to moisture. If a port is temporarily unused during a staged install, cap it with a protective cover.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis 10-pack is a good match for refits, multi-station boats, and installs where several sensors and displays will share one NMEA 2000 backbone. It is also handy for service trucks and technicians who want consistent network hardware on hand for troubleshooting and expansions.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep connections clean, hand-tighten coupling nuts, and support the cabling so the connector body is not hanging under load. In saltwater boats, a quick wipe-down during seasonal checks helps prevent grime buildup around the connector collars.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269124747445,"sku":"QBP477612","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299351_qbp477612.jpg?v=1771542056"},{"product_id":"qbp814904","title":"Garmin Quarter-Turn Locking Collar, Two-Piece Split, For 11mm Cables","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin K00-00494-01 is a quarter-turn locking collar that lets you route compatible Garmin cables through tight spaces and add the collar after the connector is already behind the panel.\u003c\/p\u003e\u003cp\u003eIt is especially useful when a newer Garmin cable arrives without the collar pre-installed, or when a collar went missing during a refit. Because the collar comes as a two-piece design, you can avoid drilling oversized holes just to pass a fixed connector through a bulkhead or behind cabinetry.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo-piece collar installs around the connector after the cable is routed\u003c\/li\u003e\n\u003cli\u003eHelps avoid large cutouts when feeding connectors behind the dash or through cabinetry\u003c\/li\u003e\n\u003cli\u003eQuarter-turn locking action secures the connection on compatible Garmin ports\u003c\/li\u003e\n\u003cli\u003eUseful replacement when a locking collar is missing or was not installed on the cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis collar is for Garmin connections that use a quarter-turn locking collar system. If your connection uses a threaded ring or another retaining method, this part will not seat or lock correctly.\u003c\/p\u003e\u003cp\u003eWhen replacing a missing collar, compare the connector style on both the device and cable so you do not reopen the helm twice.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the connector through your pass-through first, then place the two collar halves around the connector and close them together. After the connector is plugged into the device, rotate the collar a quarter turn to lock it.\u003c\/p\u003e\u003cp\u003eSupport the cable so the connector is not carrying weight or getting pulled as the boat moves. Leaving a small service loop behind the dash makes service work and winter layup much less frustrating.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis part makes the most sense on helm refits where access is tight and cable runs have to snake through cabinetry without enlarging existing holes. It is also a smart spare for anyone who regularly disconnects electronics for troubleshooting and wants a quick way to replace a misplaced collar.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eIf the collar is exposed to salt spray, rinse with fresh water and let it dry before reconnecting. Any time the connector is unplugged and re-seated, confirm the collar is fully engaged so vibration does not work the connection loose over time.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269314343093,"sku":"QBP814904","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299573_qbp814904.jpg?v=1771543297"},{"product_id":"qbp990139","title":"Garmin NMEA 2000 Multi-Port T-Connector, 4-Port, 5pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11078-01CASE is a case pack of five NMEA 2000 multi-port T-connectors that let you connect up to four NMEA 2000 device drops at one backbone location. It is a clean way to build out a bus behind the helm or in a rigging locker without stacking several standard tees in a row.\u003c\/p\u003e\u003cp\u003eBy putting the connection points into one rigid block, the backbone run has fewer joints to work loose, and the cable bundle is easier to support so the connectors are not carrying the load.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4-port multi-port T-connector format for bringing up to four device drop connections to a single backbone point\u003c\/li\u003e\n\u003cli\u003eHelps reduce extra joints in long or crowded backbones compared with chaining multiple tees\u003c\/li\u003e\n\u003cli\u003eRigid body makes it easier to secure the network and manage strain on cables in areas with vibration\u003c\/li\u003e\n\u003cli\u003eData interface: NMEA 2000\u003c\/li\u003e\n\u003cli\u003eCase pack quantity: 5 connectors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the connector inline on the NMEA 2000 backbone where you have several devices in the same area. Once the backbone is reconnected through the tee, plug each device drop cable into an open port and secure the cabling so the connectors are not hanging by their leads.\u003c\/p\u003e\u003cp\u003eKeep your network layout within normal NMEA 2000 practices, including correct termination at the ends of the backbone and a single, properly fused power connection at the appropriate point in the system.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis connector is for NMEA 2000 network cabling and is used when you need several drops near the same mounting location. It fits typical marine electronics networks that include chartplotters, instruments, autopilot components, VHF\/AIS, sensors, and other NMEA 2000 equipment. It suits refits where multiple drops land behind one console and installers stocking parts for repeat builds.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eFive NMEA 2000 multi-port T-connectors (case pack)\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eSafety notice\u003c\/h6\u003e\u003cp\u003eThis item carries a California Proposition 65 warning.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269350158517,"sku":"QBP990139","price":274.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299115_qbp990139.webp?v=1771543514"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/fixed-mount-gps-connectors.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}