{"title":"Fishing Rod Holders","description":"","products":[{"product_id":"qbp253003","title":"TACO Marine Flush Mount Rod Holder, 10 Degree, Aluminum, Round Flange, 5-1\/2 in Tube","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F31-0702BXY is a 10° flush mount rod holder with a round flange, aluminum construction, and a deluxe anodized finish for clean installation on fishing boats. Its 5-1\/2\" tube section gives the rod butt a secure pocket below the deck surface, while the angled layout keeps the rod positioned naturally along a gunwale or leaning post.\u003c\/p\u003e\u003cp\u003eThis rod holder is built for everyday rod storage and trolling setups where a flush look matters and deck space needs to stay usable. A welded I-beam seats the rod butt, and the welded pin design adds strength at the contact point inside the tube. It can also be used with compatible TACO Carbon Fiber Tele-Sun Shade Pole setups when the installation calls for a deck-mounted support point.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10° flush mount layout helps angle the rod outward from the gunwale or leaning post.\u003c\/li\u003e\n\u003cli\u003eRound flange gives the installation a clean finished edge on the mounting surface.\u003c\/li\u003e\n\u003cli\u003eAluminum construction with deluxe anodized finish suits visible cockpit and fishing-area installations.\u003c\/li\u003e\n\u003cli\u003e5-1\/2\" tube section supports the rod butt below the deck surface.\u003c\/li\u003e\n\u003cli\u003eWelded I-beam helps keep the rod butt seated while underway or while fishing.\u003c\/li\u003e\n\u003cli\u003eWelded pin design adds support inside the holder.\u003c\/li\u003e\n\u003cli\u003eForm-fitted white PVC liner helps protect the rod handle and reduces direct contact with the aluminum tube.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is a flush mount rod holder, so the boat must have the correct mounting location, clearance below the surface, and structure to support the rod load. It is commonly suited to gunnels and leaning posts where the tube can drop below the top surface without interfering with wiring, plumbing, flotation, or other hardware.\u003c\/p\u003e\u003cp\u003eBefore cutting or replacing an existing holder, check the available depth for the 5-1\/2\" tube section and confirm that the 10° angle works with the rod spread and nearby hardware. On cored fiberglass surfaces, seal the exposed core properly during installation to help keep water out of the laminate.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis holder is a good match for anglers who want a fixed rod position that stays low-profile when not in use. It works well in fishing areas where removable clamp-on holders would be in the way, and it keeps the cockpit or gunwale area tidy for coastal fishing, offshore runs, and dockside rod storage.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush mount 10° rod holder\u003c\/li\u003e\n\u003cli\u003eForm-fitted white PVC liner\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023071080629,"sku":"QBP253003","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331495_qbp253003.jpg?v=1780191653"},{"product_id":"qbp529909","title":"TACO Marine ShadeFin Fixed Rod Holder Mount, For Standard Rod Holders, Type-304 Stainless Steel, Nylon Sleeve, Locking Knob","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T10-3000-5 is a fixed rod holder mount for attaching a ShadeFin shade system to a compatible boat rod holder. It is made from high-polished Type-304 stainless steel and uses a locking knob, nylon sleeve, self-aligning notch, and pin-locking hole to help keep the ShadeFin connection secure while the boat is at rest or underway in normal operating conditions.\u003c\/p\u003e\u003cp\u003eThis mount is mainly suited for firmly welded T-top rod holders. It can also be used with a gunnel rod holder when the proper adapter is used, or with the Telescopic Rod Holder Accessory when that separate accessory is part of the setup. For owners adding portable shade to a center console, fishing boat, or cruiser, it gives the ShadeFin a fixed mounting point without adding a permanent deck or hardtop bracket.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFixed mount for TACO Marine ShadeFin systems using compatible rod holder locations on board\u003c\/li\u003e\n\u003cli\u003eFits standard T-top rod holders when the rod holder is firmly welded and able to accept the mount\u003c\/li\u003e\n\u003cli\u003eHigh-polished Type-304 stainless steel construction for a clean finish in exposed marine spaces\u003c\/li\u003e\n\u003cli\u003eLocking knob helps secure the mount in the rod holder once the butt end is seated\u003c\/li\u003e\n\u003cli\u003eNylon sleeve helps reduce movement when the rod holder opening is larger than the mount shaft\u003c\/li\u003e\n\u003cli\u003eGimbal-slot butt end mates with the rod holder pin for proper seating\u003c\/li\u003e\n\u003cli\u003eSelf-aligning notch and pin-locking hole help guide and retain the ShadeFin mounting post\u003c\/li\u003e\n\u003cli\u003eCovered by a 3-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe mount is intended for use with ShadeFin and a suitable rod holder location. In a T-top installation, the rod holder should be firmly welded before the ShadeFin is mounted. For gunnel rod holder installations, the correct adapter is required so the mount is seated properly and the threads are not damaged.\u003c\/p\u003e\u003cp\u003eThe fit depends on the rod holder opening, the internal gimbal pin, and the ability to tighten the locking knob at the bottom of the mount. The included nylon sleeve is useful where the rod holder opening has extra clearance around the mount shaft, helping take up space and reduce unwanted movement.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation starts by removing the locking knob, placing the beveled nylon sleeve on the mount leg, and sliding the gimbal butt end into the rod holder so it engages with the rod holder pin. Once the sleeve is seated, the locking knob is tightened until the mount has no wiggle room.\u003c\/p\u003e\u003cp\u003eAfter the mount is secured in the rod holder, the ShadeFin mounting post slides into the open end of the mount. The alignment pin guides the post into position, and the locking pin should pass through the locking hole before the ShadeFin is opened.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis mount is a practical match for boaters who already have a suitable rod holder and want a removable shade position without drilling a new permanent mount into the deck, gunwale, or hardtop. It works well for adding shade over a cockpit, helm area, fishing station, or lounging space where the ShadeFin location lines up with an existing rod holder.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the mount with fresh water and wipe away salt around the locking knob, sleeve, and pin-locking area. Keeping the sleeve clean and checking that the locking knob turns freely will make setup easier and help the mount seat properly each time it is used.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023071244469,"sku":"QBP529909","price":294.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331499_qbp529909.jpg?v=1780191653"},{"product_id":"qbp593845","title":"TACO Marine ShadeFin Adjustable Rod Holder Mount, 316L SS, 15-Degree Detents","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T10-3000-6 is an adjustable rod holder mount for adding a ShadeFin shade setup to a boat through an existing rod holder. It gives boaters a practical way to position shade over the helm, cockpit, or fishing area without committing to a fixed shade frame.\u003c\/p\u003e\u003cp\u003eThe mount is made from Type-316L stainless steel with a high polish finish and works with the ShadeFin system and 1-1\/8-inch diameter outrigger poles. It seats into a standard T-top rod holder, using a gimbal-slot butt end, nylon sleeve, and locking knob to help keep the mount stable in normal boat use.\u003c\/p\u003e\u003cp\u003eAngle adjustment is handled with a Sure-Grip knob, with safety detents every 15 degrees so the shade can be set higher or lower as the sun moves. This is useful on center consoles, fishing boats, and other vessels where shade needs to move with the crew rather than stay in one fixed position.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAdjustable rod holder mount for TACO Marine ShadeFin shade systems\u003c\/li\u003e\n\u003cli\u003eType-316L stainless steel construction with a high polish finish for exposed marine locations\u003c\/li\u003e\n\u003cli\u003eFits standard T-top rod holders and can also be used with compatible gunnel rod holder accessories sold separately\u003c\/li\u003e\n\u003cli\u003ePairs with ShadeFin and 1-1\/8-inch diameter outrigger poles\u003c\/li\u003e\n\u003cli\u003eSure-Grip knob allows controlled shade angle adjustment by hand\u003c\/li\u003e\n\u003cli\u003eSafety detents every 15 degrees help hold the selected angle during use\u003c\/li\u003e\n\u003cli\u003eGimbal-slot butt end mates with the rod holder gimbal pin for proper seating\u003c\/li\u003e\n\u003cli\u003eNylon sleeve adds stabilization when the rod holder opening is larger than the mount shaft\u003c\/li\u003e\n\u003cli\u003eSelf-aligning notch and pin-locking hole help the mount sit securely in the holder\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the mount by inserting it into a firmly welded T-top rod holder and checking that the gimbal slot is properly engaged with the rod holder pin. The included nylon sleeve can be used when the rod holder opening needs additional support around the mount shaft.\u003c\/p\u003e\u003cp\u003eOnce the mount is seated, the locking knob secures it in place. The ShadeFin can then be inserted and adjusted with the Sure-Grip knob until the shade angle matches the sun position and the area being covered.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount is intended for use with the TACO Marine ShadeFin system rather than as a fishing rod holder. It is a good match for boats that already have a suitable T-top rod holder and need portable shade over a helm seat, leaning post, cockpit station, or fishing position.\u003c\/p\u003e\u003cp\u003eBefore installation, confirm that the rod holder is firmly mounted and positioned where the ShadeFin can open without interfering with antennas, outriggers, electronics, canvas, or crew movement. For gunnel-mounted use, a compatible adapter or telescopic rod holder accessory is required.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThe adjustable layout works well for boaters who need shade that can shift throughout the day, especially during coastal cruising, dockside time, sandbar stops, and long fishing sessions. The stainless steel build and rod holder installation style make it practical for open boats where sun coverage needs to be added without taking up permanent deck space.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023071277237,"sku":"QBP593845","price":469.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331514_qbp593845.jpg?v=1780191654"},{"product_id":"qbp665998","title":"TACO Marine ShadeFin Adjustable Clamp-On Pipe Mount, 316L Stainless Steel, 3\/4 in or 1 in Pipe, 1-1\/4 in Tube","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T10-3000-7 is an adjustable clamp-on pipe mount for securing a ShadeFin shade system on boats that do not have an open rod holder available. It fits 3\/4 inch or 1 inch schedule-40 pipe, as well as 1-1\/4 inch O.D. tube, making it useful on many hardtops, T-tops, rails, tower legs, and other round-tube mounting points.\u003c\/p\u003e\u003cp\u003eThe mount gives the ShadeFin a stable attachment point while still letting the user change the shade angle on the water. Adjustment is handled with a soft-touch knob, and the mount indexes every 15 degrees with safety detents so the ShadeFin can be aimed where coverage is needed as the sun moves.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 3\/4 inch or 1 inch schedule-40 pipe and 1-1\/4 inch O.D. tube for use on common boat rail and top structures.\u003c\/li\u003e\n\u003cli\u003eMade from Type-316L stainless steel with a high-polish finish for exposed marine mounting locations.\u003c\/li\u003e\n\u003cli\u003eAngle adjustment every 15 degrees helps position the ShadeFin for changing sun direction during the day.\u003c\/li\u003e\n\u003cli\u003eSoft-touch knob allows on-board adjustment without needing tools for routine repositioning.\u003c\/li\u003e\n\u003cli\u003eSafety detents help hold the selected angle once the ShadeFin is set.\u003c\/li\u003e\n\u003cli\u003eSelf-aligning notch and pin-locking hole help the ShadeFin seat correctly in the mount.\u003c\/li\u003e\n\u003cli\u003eUseful for boats with limited rod holders or for installations where the available rod holders are already being used for fishing gear.\u003c\/li\u003e\n\u003cli\u003eBacked by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis mount clamps directly to compatible round pipe or tube, so it is a practical option when adding ShadeFin coverage to a cockpit, helm area, bow seating zone, or aft deck without drilling into a rod holder location. Before purchase, the pipe or tube diameter should be checked carefully against the supported sizes: 3\/4 inch schedule-40 pipe, 1 inch schedule-40 pipe, or 1-1\/4 inch outside-diameter tube.\u003c\/p\u003e\u003cp\u003eBecause the mount carries a shade accessory, the selected location should be a solid structural point with enough clearance for the ShadeFin to rotate and sit at the intended angle. On boats with T-tops or hardtop supports, the mount can help place shade where it is useful while keeping rod holders free for rods, flags, or other accessories.\u003c\/p\u003e\u003ch6\u003eMaterials and marine use\u003c\/h6\u003e\u003cp\u003eType-316L stainless steel is a strong match for exposed deck hardware, especially where salt spray, washdowns, and sun exposure are part of normal use. The high-polish finish also matches well with many stainless rail and top assemblies, which helps the mount look integrated rather than like an add-on.\u003c\/p\u003e\u003cp\u003eThis mount is a good fit for boat owners adding TACO Marine ShadeFin coverage to center consoles, fishing boats, cruisers, and day boats where fixed shade is limited or where flexible shade positioning matters during long hours on board.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023071310005,"sku":"QBP665998","price":476.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331826_qbp665998.jpg?v=1780191654"},{"product_id":"qbp617302","title":"TACO Marine ShadeFin Fixed Clamp-On Mount, 3\/4 in or 1 in Pipe, 1-1\/4 in Tube, 316L SS","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T10-3000-11 is a fixed clamp-on mount for attaching a ShadeFin to existing pipe or tube when the boat has limited rod-holder options. It fits 3\/4 inch or 1 inch schedule-40 pipe, as well as 1-1\/4 inch O.D. tube, making it useful on many T-tops and similar rail structures.\u003c\/p\u003e\u003cp\u003eThis mount is made from polished Type-316L stainless steel, a practical choice for hardware that lives around saltwater, spray, UV exposure, and regular washdowns. The fixed clamp-on layout keeps the ShadeFin attachment point simple, with a guide notch for accurate placement and a pin-locking hole to help keep the setup secure once installed.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 3\/4 inch or 1 inch schedule-40 pipe and 1-1\/4 inch O.D. tube for use on compatible T-top piping and rail structures.\u003c\/li\u003e\n\u003cli\u003eFixed clamp-on format gives boats without a suitable rod holder a dedicated ShadeFin mounting point.\u003c\/li\u003e\n\u003cli\u003ePolished Type-316L stainless steel construction suits exposed marine locations where corrosion resistance matters.\u003c\/li\u003e\n\u003cli\u003eGuide notch helps position the ShadeFin accurately during setup.\u003c\/li\u003e\n\u003cli\u003eSelf-aligning notch and pin-locking hole help the mount stay properly located once the ShadeFin is installed.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and covered by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis mount is intended for compatible round pipe or tube, so the key fit check is the outside diameter and pipe type at the mounting location. Before installation, confirm that the chosen section of T-top piping or rail is straight, accessible, and clear of canvas, antennas, outriggers, rod holders, lights, and other hardware that could interfere with ShadeFin movement or coverage.\u003c\/p\u003e\u003cp\u003eBecause this is a fixed mount, placement matters. Mounting it where the ShadeFin can open cleanly and cast shade over the cockpit, helm, aft deck, or other active area will give the best result without adding unnecessary hardware to the boat.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis clamp-on mount is a good match for center consoles, bay boats, and fishing boats that use a ShadeFin but do not have a convenient rod holder in the right location. It can also help when the preferred shade position is on existing T-top structure rather than in a gunnel or hardtop-mounted rod holder.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the mount with fresh water and check the clamping area during routine cleaning. Keeping the polished stainless surface free of salt buildup and inspecting the locking points helps maintain a clean fit and dependable operation through repeated setup and removal.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023071342773,"sku":"QBP617302","price":175.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331626_qbp617302.jpg?v=1780191655"},{"product_id":"qbp991962","title":"TACO Marine ShadeFin Telescopic Rod Holder Accessory, 42-67 in","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T10-3000-9 is a ShadeFin telescopic rod holder mount that turns a standard gunnel rod holder into an adjustable support point for portable boat shade. It extends from 42 inches to 67 inches tall, helping raise ShadeFin over the deck so there is usable standing space below.\u003c\/p\u003e\u003cp\u003eThis mount is made from clear anodized aluminum and uses a solid aluminum gimbal butt that drops into a standard rod holder. The bottom joint adjusts the upward angle to 0°, 15°, or 30° with a Sure-Grip knob and pull pin lock, while the throw latch controls height and 360° horizontal rotation.\u003c\/p\u003e\u003cp\u003eIt is a practical add-on for boats that need shade at the dock, at the sandbar, while fishing, or when people are in the water alongside the boat. A fixed or adjustable ShadeFin rod holder mount is required at the top and is sold separately.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits standard gunnel rod holders, so no permanent deck hardware is needed for normal use.\u003c\/li\u003e\n\u003cli\u003eTelescopes from 42 inches to 67 inches tall to lift ShadeFin above the deck.\u003c\/li\u003e\n\u003cli\u003eBottom joint adjusts to 0°, 15°, or 30° using a Sure-Grip knob and pull pin lock.\u003c\/li\u003e\n\u003cli\u003eThrow latch allows height adjustment and 360° horizontal rotation for positioning shade over the deck or over the side of the boat.\u003c\/li\u003e\n\u003cli\u003eClear anodized aluminum construction helps keep the mount light while standing up to regular marine use.\u003c\/li\u003e\n\u003cli\u003eSolid aluminum gimbal butt seats into the rod holder for a stable base.\u003c\/li\u003e\n\u003cli\u003eInternal Delrin bearings support smooth adjustment during setup.\u003c\/li\u003e\n\u003cli\u003eSold each and backed by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward for boats with a standard gunnel rod holder. Insert the solid gimbal butt into the rod holder, remove the pull pin, set the lower joint angle to 0°, 15°, or 30°, tighten the Sure-Grip knob, and reinstall the pull pin.\u003c\/p\u003e\u003cp\u003eThe ShadeFin rod holder mount then fits into the top opening. Once the gimbal butt seats into the accessory gimbal pin, the ShadeFin can be attached and deployed. The throw latch is used after setup to fine tune the height and rotate the shade into position.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount is intended for use with the TACO Marine ShadeFin system and a standard gunnel rod holder. It is a good match for center consoles, bay boats, cruisers, and other vessels where rod holders are already available and temporary shade is preferred over a fixed frame.\u003c\/p\u003e\u003cp\u003eBecause it relies on an existing rod holder, fit should be checked against the rod holder location, angle, and surrounding clearance on the boat. The mount also needs the separate fixed or adjustable ShadeFin rod holder mount at the top to complete the setup.\u003c\/p\u003e\u003ch6\u003eMaterials and care\u003c\/h6\u003e\u003cp\u003eThe clear anodized aluminum tube, solid aluminum gimbal butt, and Delrin bearing components make the unit suitable for repeated handling in a marine environment. After use around saltwater, rinse the mount with fresh water, dry it before storage, and check the latch, pull pin, and knob before the next setup.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023071408309,"sku":"QBP991962","price":455.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331633_qbp991962.jpg?v=1780191656"},{"product_id":"qbp443367","title":"TACO Marine 4-Rod Deluxe Poly Rod Rack, UV-Stabilized Polyethylene, 18 in, 1-3\/4 in Rod Holders","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P03-064 Series is a 4-rod deluxe poly rod rack for adding organized rod and tool storage to a fishing boat, center console, bay boat, skiff, or dockside rigging area. It holds four rods in a compact rack format and is made from UV-stabilized polyethylene, so it suits exposed marine locations where sun, spray, and regular washdowns are part of normal use.\u003c\/p\u003e\u003cp\u003eThis rack gives anglers a fixed place for rods, pliers, and a knife without taking up gunnel or cockpit space needed for fishing. The flared rod openings help when loading and removing rods, while the slotted rod holders help keep most conventional and spinning outfits in place during normal movement on board.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds four fishing rods in one rack, helping keep the cockpit, leaning post area, cabin bulkhead, or console side more organized.\u003c\/li\u003e\n\u003cli\u003eUV-stabilized polyethylene construction suits marine use where the rack may see sun, salt spray, and frequent cleaning.\u003c\/li\u003e\n\u003cli\u003eFlared rod holder openings make rod handling easier when rods are being stored or retrieved quickly.\u003c\/li\u003e\n\u003cli\u003eSlotted holders help secure most conventional and spinning outfits without adding a complicated locking mechanism.\u003c\/li\u003e\n\u003cli\u003eIntegrated storage slots give pliers and a knife a dedicated place near the rods.\u003c\/li\u003e\n\u003cli\u003eLightweight construction keeps the rack easy to position on flat mounting surfaces around the boat.\u003c\/li\u003e\n\u003cli\u003eAvailable in Black and White to match common cockpit, console, and storage-area finishes.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis 4-rod poly rack is offered in two color configurations. The color is the visible difference between the variants, while the 4-rod layout, UV-stabilized polyethylene construction, flared rod holder design, slotted rod holders, and integrated knife and plier storage remain consistent across the series.\u003c\/p\u003e\u003cp\u003eThe black version can blend well with darker consoles, trim, powder-coated hardware, or utility areas where scuffs are less visible. The white version is a common match for white fiberglass interiors, cockpit liners, and clean deck layouts.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eP03-064B: Color Black. This version gives the rack a darker look that works well near black trim, electronics areas, leaning posts, or utility-style rigging zones.\u003c\/li\u003e\n\u003cli\u003eP03-064W: Color White. This version suits boats with white fiberglass surfaces, light cockpit interiors, or storage areas where a bright, clean visual match is preferred.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the rack where rods can be reached without blocking walkways, hatches, engine access, or casting space. Common locations include a console side, cockpit bulkhead, cabin wall, tackle station, dock box area, or another flat surface with enough clearance for rod handles and reel bodies.\u003c\/p\u003e\u003cp\u003eBefore drilling, check the backside of the mounting surface for wiring, plumbing, fuel lines, and structural members. Use marine-appropriate fasteners for the surface material and make sure the rack sits flat so rods slide in and out without binding.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis rack is a practical fit for anglers who want rods staged and tools close by during coastal fishing, inshore trips, offshore runs, or dockside preparation. It is especially useful when loose rods would otherwise sit across seats, decks, or leaning posts where they can get stepped on or knocked around.\u003c\/p\u003e\u003cp\u003eThe simple poly construction also makes it easy to rinse after use. A freshwater washdown after saltwater trips helps keep the rack, rod handles, pliers, and nearby hardware cleaner between outings.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Black","offer_id":52023080321205,"sku":"QBP443367-V5","price":97.99,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":52023080353973,"sku":"QBP443367-V4","price":98.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335250_qbp443367.jpg?v=1780191682"},{"product_id":"qbp236322","title":"TACO Marine Aluminum\/Poly 3-Rod Rack Holder, Brite-Dipped Anodized Finish, PVC White Liner","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F31-3103BXZ-1 is a 3-rod aluminum and poly rod rack for organizing light- to medium-tackle spinning rod and reel combos on board. It gives anglers a fixed storage point for rods in the cockpit, leaning post area, cabin entry, or another protected mounting location where loose tackle can get in the way.\u003c\/p\u003e\u003cp\u003eThe rack uses a brushed aluminum finish with poly rod supports and a form-fitted white PVC liner to help separate the rods from the holder surfaces. Each rod position has a 1-1\/2\" inside diameter, and the rack length is 13-3\/8\", making it a compact option for boats that need three ready storage spots without taking over the working deck.\u003c\/p\u003e\u003cp\u003eSlotted rod positions help lock rods and reels into place while the integrated knife and plier slots keep common fishing tools close at hand. Recessed fasteners help the rack sit cleanly once installed, which matters in areas where lines, clothing, or hands may brush past the holder during a day of fishing.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds three rods in a surface-mount rack layout for cockpit, cabin, console, or gear-station storage.\u003c\/li\u003e\n\u003cli\u003e1-1\/2\" rod holder inside diameter suits light- to medium-tackle spinning rod and reel combos.\u003c\/li\u003e\n\u003cli\u003e13-3\/8\" rack length helps fit three rod positions into a compact storage footprint.\u003c\/li\u003e\n\u003cli\u003eBrushed aluminum finish with poly racks gives the holder a clean look for visible mounting areas.\u003c\/li\u003e\n\u003cli\u003eSlotted rod positions help keep rods and reels from shifting while the boat is moving.\u003c\/li\u003e\n\u003cli\u003eForm-fitted white PVC liner helps protect rods where they sit in the rack.\u003c\/li\u003e\n\u003cli\u003eIntegrated knife and plier slots keep frequently used fishing tools organized near the rods.\u003c\/li\u003e\n\u003cli\u003eRecessed fasteners reduce exposed hardware and support a neater finished installation.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and placement\u003c\/h6\u003e\u003cp\u003eThis rod rack is meant for a fixed surface-mount installation, so the mounting area should be flat, strong, and easy to reach while fishing. Common locations include a cockpit side panel, console face, cabin bulkhead, leaning post area, or a tackle station where rods can stay vertical and out of the deck traffic path.\u003c\/p\u003e\u003cp\u003eBefore drilling, check the clearance behind the mounting surface and confirm that the rods and reels will not interfere with seating, hatches, controls, canvas, or walkways. A dry fit with the rods in place is useful because reel size and handle orientation can change how much working space the rack needs.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis rack fits boats that need practical storage for a few spinning outfits without moving to a larger multi-rod system. It works well for coastal fishing, bay boats, center consoles, family fishing boats, and dockside storage where keeping rods upright and easy to grab is more important than adding flush-mounted rod holders.\u003c\/p\u003e\u003cp\u003eIt is a good match for anglers who want rod storage plus space for a knife and pliers in one tidy location. The 3-rod layout keeps the setup simple and readable, which helps when the crew is changing rigs, clearing the deck, or putting gear away after a run.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the rack with fresh water and wipe away trapped salt around the slots, liner, and fastener recesses. Keeping the holder clean helps preserve the finish and keeps rods sliding in and out without grit rubbing against the liner or reel seats.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023088677045,"sku":"QBP236322","price":249.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331556_qbp236322.jpg?v=1780191697"},{"product_id":"qbp224063","title":"TACO Marine 4-Rod Aluminum Poly Rod Rack, 1-1\/2 in ID, 18 in","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F31-3104BXZ-1 is a surface-mount 4-rod aluminum and poly rack for organizing light to medium tackle spinning rod and reel combos on board. It gives anglers a fixed storage point for up to four rods, with slotted poly racks that hold rods and reels in place when the boat is at rest, at the dock, or moving between fishing spots.\u003c\/p\u003e\u003cp\u003eThe rack has a brite-dipped, sanded and anodized brushed aluminum finish, white PVC liners fitted inside the rod openings, and a 1-1\/2 inch rod holder inside diameter. At 18 inches long, it fits well on many cockpit, leaning post, console, bulkhead, or transom-area mounting surfaces where rods need to stay accessible without lying loose on deck.\u003c\/p\u003e\u003cp\u003eIntegrated slots for a knife and pliers help keep common fishing tools close to the rods, which is useful when rigging bait, cutting line, or handling tackle during a day on the water. Recessed fasteners keep the installation surface cleaner and reduce snag points around the rack.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds up to four light to medium tackle spinning rod and reel combos in a fixed surface-mount rack.\u003c\/li\u003e\n\u003cli\u003eSlotted poly rack layout helps lock rods and reels into position for cleaner storage on deck or near the cockpit.\u003c\/li\u003e\n\u003cli\u003eWhite PVC liners add a protective contact surface where rods sit in the holder openings.\u003c\/li\u003e\n\u003cli\u003e1-1\/2 inch inside diameter rod openings and an 18 inch rack length give clear fit points for planning the mounting location.\u003c\/li\u003e\n\u003cli\u003eBrite-dipped, sanded and anodized brushed aluminum finish gives the rack a clean look for exposed boat areas.\u003c\/li\u003e\n\u003cli\u003eIntegrated knife and pliers slots keep frequently used fishing tools stored with the rod setup.\u003c\/li\u003e\n\u003cli\u003eRecessed fasteners support a flush installation with fewer raised edges around the rack.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and covered by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis rack is meant for a solid surface-mount installation. Before drilling, check that the chosen area has enough flat space for the 18 inch length, proper backing behind the mounting surface, and clearance for rods, reels, handles, and tool slots once everything is loaded.\u003c\/p\u003e\u003cp\u003eCommon mounting areas include cockpit side panels, console sides, leaning posts, transom work areas, and other places where rods can be stored upright and reached quickly. The rack is a practical match for fishing boats that need rod storage close to the action without taking up deck space.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis holder works well for anglers who carry multiple spinning setups and want them grouped in one place instead of spread across the cockpit. It is especially useful for coastal fishing, dockside rigging, and general rod storage between runs, where quick access and tidy organization matter more than a removable setup.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023088709813,"sku":"QBP224063","price":334.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331557_qbp224063.jpg?v=1780191697"},{"product_id":"qbp819736","title":"TACO Marine Deluxe Trident Rod Holder Cluster Straight, 3-Rod, High-Polished Aluminum, 9-3\/4 in Holders, 1-1\/2 in Shaft","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F31-0780BXY-1 is a straight Deluxe Trident rod holder cluster that turns one boat rod holder into three rod positions for kite fishing, trolling spreads, and quick cockpit rod management. It uses three 9-3\/4 inch flared rod holders in a trident layout, with a 1-1\/2 inch shaft made to fit standard rod holders with a 1-5\/8 inch diameter.\u003c\/p\u003e\u003cp\u003eThis cluster is built from welded aluminum with a high-polished finish, giving offshore and coastal anglers a clean way to add rod capacity without drilling new holes or changing the boat’s existing rod holder layout. The straight configuration keeps the setup compact and organized, especially when kite rods, heavy reels, or spare rods need to stay close at hand.\u003c\/p\u003e\u003cp\u003eAn eye strap attachment gives a practical tie-off point for a safety lanyard or de-hooker placement, and the included mesh bag helps the unit dry after wet use while protecting deck lockers and storage surfaces.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTurns one existing rod holder into three rod positions for kite fishing or extra cockpit rod storage.\u003c\/li\u003e\n\u003cli\u003eThree 9-3\/4 inch flared rod holders help support larger rods and heavier reel setups.\u003c\/li\u003e\n\u003cli\u003e1-1\/2 inch shaft fits standard rod holders with a 1-5\/8 inch diameter.\u003c\/li\u003e\n\u003cli\u003eWelded aluminum construction with a high-polished finish for use in demanding marine environments.\u003c\/li\u003e\n\u003cli\u003eTrident layout keeps multiple rods close together while reducing clutter around the gunwale.\u003c\/li\u003e\n\u003cli\u003eEye strap attachment gives a tie-off point for a safety lanyard or de-hooker placement.\u003c\/li\u003e\n\u003cli\u003eMesh storage bag allows the cluster to dry after wet use and helps protect storage areas from scratches.\u003c\/li\u003e\n\u003cli\u003eCovered by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis rod holder cluster drops into a compatible existing rod holder, so it is useful on boats where rod capacity needs to increase without adding permanent hardware. Before ordering, check that the receiving rod holder can accept a 1-1\/2 inch shaft and has the standard 1-5\/8 inch inside diameter needed for proper fit.\u003c\/p\u003e\u003cp\u003eThe straight shaft works well for gunwale-mounted rod holders where a compact, centered setup is preferred. It is a practical match for fishing boats that need fast rod staging during kite fishing, live-bait work, or spread changes while keeping the deck layout clean.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eAnglers running multiple rods from a limited cockpit area will appreciate the extra capacity without a more involved installation. The flared holders help guide rods into place quickly, and the clustered layout keeps kite rods or standby rods within reach while the crew works around the transom or gunwale.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDeluxe Trident Rod Holder Cluster Straight\u003c\/li\u003e\n\u003cli\u003eMesh storage bag\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023107354805,"sku":"QBP819736","price":544.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331345_qbp819736.jpg?v=1780191720"},{"product_id":"qbp117749","title":"TACO Marine Deluxe Trident Rod Holder Cluster, Offset, 3 Rod, Tool Caddy, High-Polished Aluminum","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F31-0781BXY-1 is a deluxe offset trident rod holder cluster that turns one existing boat rod holder into three usable rod positions. It uses three 9-3\/4 in offset flared rod holders in a trident layout, giving anglers more working space for kite fishing, trolling setups, or keeping extra rods ready without adding permanent hardware to the boat.\u003c\/p\u003e\u003cp\u003eThe 1-1\/2 in tube is made to fit standard 1-5\/8 in rod holders, including common gunnel mount rod holders. Its welded high-polished aluminum construction suits saltwater fishing layouts where gear is moved, rinsed, stored, and used hard across a long day on deck.\u003c\/p\u003e\u003cp\u003eA detachable tackle tray and cup holder add practical storage close to the rod spread, with pre-drilled holes for tools and rigging items. The offset arrangement helps separate larger rods and reels so they are easier to handle while the boat is underway or while lines are being managed from the cockpit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eThree 9-3\/4 in offset flared rod holders let one installed rod holder support a three-rod cluster.\u003c\/li\u003e\n\u003cli\u003e1-1\/2 in tube fits standard 1-5\/8 in rod holders for use with common gunnel mount setups.\u003c\/li\u003e\n\u003cli\u003eOffset trident layout gives rods and reels more room than a straight vertical cluster.\u003c\/li\u003e\n\u003cli\u003eWelded high-polished aluminum construction is well suited to regular deck use and washdowns.\u003c\/li\u003e\n\u003cli\u003eDetachable tackle tray keeps knives, pliers, rigs, lures, spoons, and other small gear within reach.\u003c\/li\u003e\n\u003cli\u003eIntegrated cup holder gives the cockpit a convenient place for a drink without using a separate accessory.\u003c\/li\u003e\n\u003cli\u003eRound gimbal pin construction helps accommodate many custom rod setups.\u003c\/li\u003e\n\u003cli\u003eEye strap attachment point supports a safety lanyard or de-hooker placement.\u003c\/li\u003e\n\u003cli\u003eMesh storage bag helps the cluster dry after use and helps protect deck or storage surfaces from scratches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis cluster is made for boats that already have compatible standard rod holders installed. The base tube drops into the existing holder, so it can be added for a fishing trip and removed when the cockpit needs to be cleared for cruising, family use, or storage.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm that the receiving rod holder has a 1-5\/8 in inside diameter and enough depth and support for the cluster, rods, and fishing load. As with any removable rod holder accessory, the strength of the installed holder and its backing matter, especially when carrying larger offshore rods or when the boat is moving in chop.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis rod holder cluster is a good match for anglers who need more rod positions without drilling new holes in the gunwale. It is especially useful for kite fishing setups where line control and close rod access matter, but it also works as a removable three-rod station for trolling preparation, rig changes, or dockside staging.\u003c\/p\u003e\u003cp\u003eThe tackle tray keeps frequently used tools in one place, which helps reduce clutter around the cockpit. The larger 9-3\/4 in holder length gives heavier rods and reels more support than a short holder, while the offset layout helps keep handles and reels from crowding each other.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the cluster with fresh water and let it dry before storage. Pay attention to the rod holder tubes, tray area, gimbal pin, and attachment points where salt and grit can collect.\u003c\/p\u003e\u003cp\u003eStore the unit in the included mesh bag once it is dry enough for the boat locker or tackle area. This helps protect the polished aluminum finish and reduces the chance of scratching nearby deck or storage surfaces.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDeluxe offset trident rod holder cluster\u003c\/li\u003e\n\u003cli\u003eDetachable tackle tray\u003c\/li\u003e\n\u003cli\u003eIntegrated cup holder\u003c\/li\u003e\n\u003cli\u003eMesh storage and drying bag\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023107387573,"sku":"QBP117749","price":544.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331348_qbp117749.jpg?v=1780191721"},{"product_id":"qbp786690","title":"TACO Marine 4-Rod Transom Mount Rod Rack, 40-1\/2 in Length, 1-7\/8 in ID, Brushed Anodized Aluminum","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F31-3504BSA-1 is a 4-rod transom mount rod rack that turns unused transom space into practical rod storage for fishing boats. It holds four ready-to-fish rod and reel combos and uses a spline adjustment system so the rack angle can be set to match the transom.\u003c\/p\u003e\u003cp\u003eThis rack is built with brushed aluminum and fitted with white PVC liners, giving rods a cleaner contact surface inside each holder. The rod holder inside diameter is 1-7\/8\", which is a key fit point when checking rod butt size and clearance before mounting.\u003c\/p\u003e\u003cp\u003eIt is a useful upgrade for center consoles, bay boats, walkarounds, and fishing boats where gunwale space is already taken by flush-mount holders, cleats, or other gear. The transom location keeps rods organized and easy to reach without adding clutter across the cockpit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds up to four rods on the transom to free up gunwale and deck space.\u003c\/li\u003e\n\u003cli\u003eSpline adjustment system lets the rack angle be matched to the boat's transom.\u003c\/li\u003e\n\u003cli\u003eBrushed aluminum construction gives the rack a clean look for exposed cockpit and transom areas.\u003c\/li\u003e\n\u003cli\u003eWhite PVC liners help protect rod butts and keep each holder visually finished.\u003c\/li\u003e\n\u003cli\u003e1-7\/8\" rod holder inside diameter helps confirm fit before installation.\u003c\/li\u003e\n\u003cli\u003eUseful for keeping multiple ready-to-fish combos organized during coastal fishing, trolling, or dockside rigging.\u003c\/li\u003e\n\u003cli\u003eBacked by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is a surface-mounted transom rack, so the mounting area should be checked for backing access, transom angle, hardware clearance, and interference with engines, swim platforms, ladders, trim tabs, and boarding gates. The adjustable spline makes it easier to position the holders at a workable angle instead of forcing the rack to follow one fixed transom shape.\u003c\/p\u003e\u003cp\u003eBefore drilling, dry-fit the rack with the rods and reels that will be used most often. Check that rod tips clear the outboard cowling and that reels do not hit the transom, seat backs, or other cockpit equipment when the boat is underway.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThe 4-rod layout works well for anglers who want extra storage for pre-rigged setups without covering the cockpit with loose rods. It can help keep trolling, casting, and backup combinations separated and ready while leaving existing flush holders available for active fishing.\u003c\/p\u003e\u003cp\u003eBecause it mounts at the transom, the rack is best suited to boats where that area stays accessible and does not interfere with boarding or engine service. It is a good match for owners who need more rod capacity but do not want to add a larger leaning post rack or modify the hardtop.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater trips, rinse the rack and liners with fresh water and let the area dry before covering the boat. Periodic checks of the mounting hardware and liner condition are worthwhile, especially on boats that see regular trailering, offshore chop, or heavy cockpit use.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023119347893,"sku":"QBP786690","price":409.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331786_qbp786690.jpg?v=1780191738"},{"product_id":"qbp396184","title":"TACO Marine Olympic 5-Rod Holder Cluster, Fits 1-5\/8 in Rod Holders, 9-3\/4 in Flared Holders, Anodized Aluminum","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F31-0790BXY-1 is an Olympic 5-rod holder cluster for organizing up to five fishing rods in a single existing boat rod holder. It is a practical setup for boats that need more rod capacity without adding permanent holders to the gunwale, leaning post, tower, or cockpit area.\u003c\/p\u003e\u003cp\u003eThe cluster uses welded, high-polished anodized aluminum construction and has flared 9-3\/4\" rod holders sized for big game tackle. It fits standard 1-5\/8\" rod holders, so it can drop into many common deck and gunwale-mounted holders already installed on sport fishing boats.\u003c\/p\u003e\u003cp\u003eThe I-Beam layout helps keep the rods spread out and seated, while the solid gimbal base gives the cluster a secure feel in the receiving holder. It also works well as a rigging station before a run, a washdown point after fishing, or a compact storage piece when rods need to be grouped together on board.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds five rods in one existing rod holder to save cockpit, gunwale, or leaning post space.\u003c\/li\u003e\n\u003cli\u003eFlared 9-3\/4\" rod holders accommodate big game tackle and make rods easier to load and remove.\u003c\/li\u003e\n\u003cli\u003eFits standard 1-5\/8\" boat rod holders for straightforward use with many existing installations.\u003c\/li\u003e\n\u003cli\u003eWelded, high-polished anodized aluminum construction keeps weight manageable while standing up to regular marine use.\u003c\/li\u003e\n\u003cli\u003eI-Beam construction keeps rods separated and helps reduce contact between reels and blanks.\u003c\/li\u003e\n\u003cli\u003eSolid gimbal base adds support when the cluster is seated in the receiving rod holder.\u003c\/li\u003e\n\u003cli\u003eWorks as a temporary rigging or washdown station during fishing trips and dockside cleanup.\u003c\/li\u003e\n\u003cli\u003ePackaged in a mesh bag that helps the unit dry when stored wet and helps protect deck or storage surfaces.\u003c\/li\u003e\n\u003cli\u003eAccepts a replacement insert, sold separately, for longer service life.\u003c\/li\u003e\n\u003cli\u003eBacked by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis cluster is made to sit in a standard 1-5\/8\" rod holder rather than bolt permanently to the boat. Before ordering, confirm the inside diameter and condition of the receiving holder, especially on older installations where liners, inserts, or corrosion can affect fit.\u003c\/p\u003e\u003cp\u003eFor the best support, use it with a properly mounted rod holder in a strong location such as a gunwale, tower, or behind a leaning post. The product is useful when rod storage needs to change from trip to trip, since it can be moved, removed, rinsed, and stored without modifying the boat.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThe Olympic 5-rod cluster is a strong match for offshore and coastal fishing boats that carry several trolling, kite, pitch, or standby rods and need them grouped in one accessible place. It helps keep the cockpit cleaner during setup and gives the crew a defined station for rigging, staging, cleaning, or temporarily storing rods between bites.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the cluster with fresh water and let it dry before storing it. The mesh bag is helpful when the unit is still damp and also helps prevent the polished aluminum from marking deck compartments or other gear while the boat is underway.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023119446197,"sku":"QBP396184","price":711.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331294_qbp396184.jpg?v=1780191739"},{"product_id":"qbp814930","title":"TACO Marine Kite Fishing 3-Rod Cluster, For Standard Gunnel Mount Rod Holders, 15° Bent Shaft, Anodized Aluminum","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F31-0770BSA-1 is a kite fishing three-rod cluster that lets you run multiple kite fishing outfits from a single standard gunnel mount rod holder. It has a 15 degree bent shaft for clearance, a 1-3\/4 inch rod holder I.D., and a three-holder layout that keeps rods grouped in a practical position while the spread is active.\u003c\/p\u003e\u003cp\u003eThe cluster measures 24-1\/2 inches high by 20 inches wide and is made from aluminum with a BSA Silver Brite Dip finish. A form-fitted white PVC liner helps protect the rods where they sit in the holders, while the gimbal locks onto a standard 1\/4 inch pin inside the boat’s rod holder for a more secure fit.\u003c\/p\u003e\u003cp\u003eThis setup makes sense for anglers who kite fish from center consoles, sportfish boats, and other offshore fishing platforms where cockpit space, line control, and fast rod access matter. It is sold individually and includes a storage bag for easier handling when the cluster is not in use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eThree-rod cluster lets multiple kite fishing rods work from one gunnel mount rod holder.\u003c\/li\u003e\n\u003cli\u003e15 degree bent shaft adds clearance and helps position the rods where they are easier to manage.\u003c\/li\u003e\n\u003cli\u003eFits standard gunnel mount rod holders with a secure gimbal design for placement on a standard 1\/4 inch pin.\u003c\/li\u003e\n\u003cli\u003eAluminum construction with BSA Silver Brite Dip finish suits the exposed deck and cockpit areas common on fishing boats.\u003c\/li\u003e\n\u003cli\u003eForm-fitted white PVC liner helps reduce direct contact between the rod and metal holder surface.\u003c\/li\u003e\n\u003cli\u003e24-1\/2 inch height, 20 inch width, and 1-3\/4 inch rod holder I.D. give buyers key fit details before installation.\u003c\/li\u003e\n\u003cli\u003eSold as a single cluster with a storage bag included.\u003c\/li\u003e\n\u003cli\u003eBacked by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis rod cluster drops into an existing standard gunnel mount rod holder, so there is no separate permanent base to install for normal use. Before use, check that the receiving rod holder has the standard internal pin needed for the gimbal to lock into place and that the surrounding gunwale area has enough room for the 20 inch wide cluster.\u003c\/p\u003e\u003cp\u003eThe bent shaft is useful when clearance is tight around covering boards, coaming pads, nearby rod holders, or cockpit hardware. As with any multi-rod setup, the boat’s rod holder and mounting surface should be in sound condition before loading the cluster with fishing outfits.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eFor kite fishing, this cluster keeps three outfits close together so the crew can manage baits, lines, and rod tips from one station instead of spreading rods across several holders. That can make cockpit movement cleaner during offshore runs, live-bait fishing, and busy bites where fast access matters.\u003c\/p\u003e\u003cp\u003eThe removable format also helps on boats that switch between trolling, bottom fishing, cruising, and kite fishing. The cluster can be stowed in the included bag when the cockpit needs to be cleared for another setup.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eKite Fishing 3-Rod Cluster\u003c\/li\u003e\n\u003cli\u003eForm-fitted anti-fungal white PVC liner\u003c\/li\u003e\n\u003cli\u003eStorage bag\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023119478965,"sku":"QBP814930","price":341.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331304_qbp814930.jpg?v=1780191740"},{"product_id":"qbp308428","title":"TACO Marine Flared Weld-On Rod Holder, 9-3\/4 in L, 1-3\/4 in ID, Brite Anodized Aluminum, White PVC Liner","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F31-2200BXY-4A is a flared weld-on aluminum rod holder with a 9-3\/4 inch length, 1-3\/4 inch inside diameter, white PVC liner, and polished finish. It is made for permanent welded installation on boat towers, T-tops, radar arches, railings, and leaning posts where a secure rod position matters during trolling, running, or dockside rigging.\u003c\/p\u003e\u003cp\u003eThe flared opening makes rod placement easier when working quickly in the cockpit or around a tower leg, while the tapered liner helps the rod sit neatly inside the holder. The Brite Dip anodized aluminum finish adds a clean look and helps the holder stand up to the saltwater, sun, and washdown conditions common on fishing boats.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e9-3\/4 inch overall length with 1-3\/4 inch inside diameter for common offshore and inshore rod setups.\u003c\/li\u003e\n\u003cli\u003eWeld-on aluminum construction for fixed mounting on towers, T-tops, radar arches, railings, and leaning posts.\u003c\/li\u003e\n\u003cli\u003eFlared mouth helps guide the rod into the holder when rods are being moved in and out during active fishing.\u003c\/li\u003e\n\u003cli\u003eWhite PVC liner is tapered to match the flared holder shape and helps protect the rod finish during use.\u003c\/li\u003e\n\u003cli\u003eBrite Dip anodized aluminum with a polished finish gives the holder a clean appearance and added surface protection.\u003c\/li\u003e\n\u003cli\u003eWelded pin construction helps seat the rod butt and works with larger gimbaled fishing rods.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis rod holder is intended for weld-on installation, so it belongs in the hands of a fabricator or installer who can match it to the boat’s aluminum tower, top, arch, rail, or leaning post layout. Before welding, confirm the angle, rod clearance, and spacing around nearby antennas, outriggers, canvas, rocket launchers, and walkways.\u003c\/p\u003e\u003cp\u003eBecause the holder becomes a permanent part of the structure once installed, placement should account for how rods will be reached while fishing and how the boat is used underway. On center consoles and offshore fishing boats, it works well in locations where a clean, fixed rod storage point is needed without adding clamp hardware.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a practical fit for anglers adding or replacing welded rod storage on towers, T-tops, leaning posts, or custom aluminum work. The polished finish and white liner suit installations where the rod holder remains visible, while the flared entry is useful when rods need to be handled quickly during trolling, drifting, or clearing the cockpit.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023119577269,"sku":"QBP308428","price":100.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331789_qbp308428.jpg?v=1780191741"},{"product_id":"qbp163986","title":"TACO Marine Flared Weld-On Rod Holder, 9-3\/4 in L, 1-3\/4 in ID, 3\/8 in Coped Blade, Polished Finish, White PVC Liner","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F31-2230BXY-4A is a flared weld-on aluminum rod holder with a 9-3\/4 inch length, 1-3\/4 inch inside diameter, polished finish, white liner, and 3\/8 inch coped blade for welded installation on boat tops and tower structures.\u003c\/p\u003e\u003cp\u003eThis holder is made for fabricated aluminum areas such as towers, T-tops, radar arches, railings, and leaning posts. The flared mouth makes rod placement easier when the boat is moving, while the welded I-Beam pin helps seat the rod butt so the rod stays properly indexed during fishing use.\u003c\/p\u003e\u003cp\u003eThe Brite Dip anodized aluminum finish gives the holder a clean polished look and helps protect the aluminum in a marine environment. The white PVC liner is shaped to work with the flared holder body and helps reduce contact between the rod and the metal tube.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e9-3\/4 inch overall length and 1-3\/4 inch inside diameter for common offshore and inshore rod setups.\u003c\/li\u003e\n\u003cli\u003e3\/8 inch coped blade for weld-on installation to compatible fabricated aluminum structures.\u003c\/li\u003e\n\u003cli\u003eFlared opening helps guide the rod into place from the cockpit, tower, or leaning post area.\u003c\/li\u003e\n\u003cli\u003eBrite Dip anodized aluminum construction with a polished finish for a clean match on marine tower work.\u003c\/li\u003e\n\u003cli\u003eWelded I-Beam pin seats the rod butt and helps control rod rotation while trolling, drifting, or running between spots.\u003c\/li\u003e\n\u003cli\u003eWhite PVC liner helps protect the rod handle from direct contact with the aluminum holder.\u003c\/li\u003e\n\u003cli\u003eSuitable for welded mounting on towers, T-tops, radar arches, railings, and leaning posts.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is a weld-on rod holder, not a clamp-on or screw-mounted accessory. It should be installed by a qualified marine fabricator who can confirm the tube, plate, or frame location, weld compatibility, rod angle, cockpit clearance, and access around canvas, electronics, antennas, and outrigger hardware.\u003c\/p\u003e\u003cp\u003eThe 3\/8 inch coped blade is intended to sit against a compatible mounting surface during fabrication. Before welding, check the rod angle, reel clearance, and how the rod will be removed under load so the finished placement works naturally from the deck or helm area.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis rod holder suits sportfishing boats, center consoles, and other fishing-focused layouts that need permanent rod storage or working rod positions on aluminum tops, arches, towers, or leaning posts. It is especially practical where a clean welded installation is preferred over add-on brackets.\u003c\/p\u003e\u003cp\u003eThe polished finish and white liner make it a good match for visible tower and top locations where the hardware needs to look finished while still handling routine saltwater fishing use, washdowns, vibration, and rod movement on board.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the holder with fresh water after saltwater use, especially around the liner, pin area, and welded joint. Periodic cleaning helps preserve the polished appearance and keeps salt, grit, and bait residue from building up where the rod handle sits.\u003c\/p\u003e\u003cp\u003eDuring regular boat checks, inspect the liner, welded joint, and surrounding structure for wear or movement. Replace worn liners as needed so rods continue to sit cleanly in the holder without unnecessary metal-to-rod contact.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023119610037,"sku":"QBP163986","price":141.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331315_qbp163986.jpg?v=1780191741"},{"product_id":"qbp737521","title":"TACO Marine 2-Drink Poly Holder with Catch-All, White Polyethylene, Suction-Cup Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P01-2000W is a white two-drink poly holder with a center catch-all compartment for keeping beverages and small loose items close at hand on board. It holds two full-size insulated drink holders or mugs, while the middle compartment gives space for items such as sunglasses, sunscreen, keys, a phone, or small fishing accessories that often end up sliding around the cockpit.\u003c\/p\u003e\u003cp\u003eThe body is made from polyethylene that is UV-stabilized and anti-fungus for use around sun, spray, and marine moisture. Its overall footprint is about 16-1\/4 in. by 5-1\/4 in., with a 3-1\/4 in. profile, so it fits well on many consoles, cockpit side panels, pontoon seating areas, and helm stations without taking over the work area.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds two full-size insulated drink holders or mugs for practical use at the helm, cockpit, or seating area.\u003c\/li\u003e\n\u003cli\u003eCenter catch-all compartment helps keep small items gathered in one place instead of loose on deck.\u003c\/li\u003e\n\u003cli\u003ePolyethylene body is UV-stabilized and anti-fungus for regular use in the marine environment.\u003c\/li\u003e\n\u003cli\u003eWhite finish works cleanly with many fiberglass interiors, consoles, leaning posts, and pontoon layouts.\u003c\/li\u003e\n\u003cli\u003eSuction cups are included for removable placement or added grip on a suitable smooth surface.\u003c\/li\u003e\n\u003cli\u003eHidden fasteners help keep the front face clean and reduce exposed snag points near towels, lines, and tackle.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a one-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis holder is a simple onboard organizer with no wiring, voltage, or marine network compatibility to check. Before placing it, confirm that the mounting surface has enough flat area for the holder and that drinks or stored items will not interfere with steering, throttle movement, rod handles, seat movement, or companionway traffic.\u003c\/p\u003e\u003cp\u003eThe included suction cups make it useful where a removable setup is preferred, such as on a smooth console face, cockpit module, pontoon table area, or other clean surface. For any fixed installation, check the backing material and clearance behind the surface before drilling, especially on thin fiberglass panels or upholstered modules.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis holder suits boats where storage space near the seating or helm area is limited. It is practical for fishing boats, pontoons, cruisers, and runabouts where drinks, sunscreen, pliers, keys, and small personal items need a consistent landing spot during a day on the water.\u003c\/p\u003e\u003cp\u003eBecause the middle compartment is open and easy to reach, it works best for items that need quick access rather than sealed storage. It is a useful add-on around the cockpit or helm, but loose valuables should still be secured when running in rough water.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the holder with fresh water after saltwater use and clean it with mild soap when sunscreen, bait residue, or drink spills build up. Avoid harsh solvents or abrasive pads that can mark the poly surface. When suction cups are used, clean both the cups and the mounting surface so they can grip properly.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo-drink poly holder with center catch-all compartment\u003c\/li\u003e\n\u003cli\u003eSuction cups\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023122264245,"sku":"QBP737521","price":109.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331754_qbp737521.jpg?v=1780191748"},{"product_id":"qbp448524","title":"TACO Marine 1-Drink Poly Cup Holder, Suction Cup Mount, White UV-Stabilized HDPE","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P01-2003W is a white poly 1-drink holder with suction cup mounting for keeping a tumbler, insulated drink holder, or mug within reach on board. It is sized for one full-size drink and supports common 16 to 30 oz tumblers, making it useful at the helm, cockpit, leaning post, console, or dockside seating area where a built-in cup holder is not available.\u003c\/p\u003e\u003cp\u003eThe holder is made from UV-stabilized high-density white polyethylene for use in sun and spray, with an easy-to-clean surface that suits fishing boats, center consoles, pontoons, and cruising boats. Its approximate dimensions are 4-5\/8\" wide x 3-1\/2\" high x 4-3\/4\" deep, so it can fit in tight deck and cockpit areas without taking over the space.\u003c\/p\u003e\u003cp\u003eSuction cups let the holder be moved as needed, while hidden fasteners help keep the face clean when mounted. The recessed bottom has drain holes, and the accessory-ready layout includes a mobile device cutout with space for a charging cable.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds one full-size insulated drink holder, mug, or 16 to 30 oz tumbler for practical use around the helm, cockpit, or fishing area.\u003c\/li\u003e\n\u003cli\u003eWhite UV-stabilized high-density polyethylene helps the holder handle sun exposure and the normal saltwater boating environment.\u003c\/li\u003e\n\u003cli\u003eSuction cups are included for portable mounting on suitable smooth surfaces.\u003c\/li\u003e\n\u003cli\u003eHidden fasteners keep the installed look clean when the holder is mounted in place.\u003c\/li\u003e\n\u003cli\u003eRecessed bottom with dual drain holes helps water escape instead of pooling under the drink.\u003c\/li\u003e\n\u003cli\u003eMobile device cutout and charging cable port add a useful place for a phone while keeping a drink secure nearby.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and placement\u003c\/h6\u003e\u003cp\u003eThis holder works well where a permanent cup holder would be inconvenient or where the crew needs a removable drink station during fishing, cruising, or time at anchor. The suction cup mount is best used on clean, smooth, non-porous surfaces so it can grip properly.\u003c\/p\u003e\u003cp\u003eFor a fixed installation, confirm the mounting surface has enough flat area for the holder footprint and enough clearance for the tumbler or mug used on board. Avoid mounting it where it can interfere with controls, lines, hatches, walking paths, or electronics.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for small cockpits, center consoles, pontoon seating areas, and fishing stations that need drink storage without cutting into the boat. The white finish blends naturally with many fiberglass interiors and console layouts, while the removable format helps when the deck needs to be cleared for cleaning or fishing work.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the holder with fresh water after saltwater use and wipe away sunscreen, fish residue, and spilled drinks before they dry on the surface. Check the suction cups before each use and clean both the cups and mounting surface so the holder stays seated during normal boat movement.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-drink poly holder\u003c\/li\u003e\n\u003cli\u003eSuction cups\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023122329781,"sku":"QBP448524","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331759_qbp448524.jpg?v=1780191749"},{"product_id":"qbp844219","title":"TACO Marine Poly Knife \u0026 Plier Holder, 2-Knife Capacity, White Finish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P01-1000W is a white poly knife and plier holder for keeping frequently used fishing and rigging tools in a fixed, easy-to-reach spot on board. It holds one pair of pliers and up to two knives, helping keep sharp tools off seats, consoles, tackle trays, and wet work surfaces.\u003c\/p\u003e\u003cp\u003eThis holder fits well around cockpit work areas, leaning posts, bait prep spaces, helm stations, and other surface-mount locations where quick access matters. The white finish blends with many fiberglass interiors and deck layouts, while the simple open-slot layout makes it easy to grab tools during fishing, line handling, or dockside prep.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds one pair of pliers and up to two knives for practical tool storage on board.\u003c\/li\u003e\n\u003cli\u003eSurface-mount layout keeps tools visible and close at hand instead of loose in drawers or tackle boxes.\u003c\/li\u003e\n\u003cli\u003eWhite poly construction suits common marine deck, cockpit, and console areas.\u003c\/li\u003e\n\u003cli\u003eOpen storage format helps wet tools drain and remain easy to remove during active use.\u003c\/li\u003e\n\u003cli\u003eMounting hardware is not included, so fasteners can be selected to match the installation surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eMount the holder on a flat, secure surface where knives and pliers can be reached without interfering with seating, walkways, hatch lids, steering movement, or fishing gear. Common locations include the side of a console, inside a cockpit work area, near a bait station, or on a bulkhead close to tackle storage.\u003c\/p\u003e\u003cp\u003eUse fasteners suited to the mounting surface and the boat environment. On thin fiberglass, panels, or cored surfaces, check access behind the panel before drilling and seal any holes as needed to help protect the substrate from water intrusion.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis holder is a practical match for anglers, coastal cruisers, and anyone who wants pliers and knives kept in one consistent place while underway or at the dock. It is especially useful in areas where tools are used repeatedly for cutting line, handling hooks, trimming bait, or general deck work.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the holder with fresh water after saltwater use, especially if it is mounted in an exposed cockpit or near a bait prep area. Check the mounting fasteners periodically for movement, since vibration and regular tool handling can loosen hardware over time.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023122362549,"sku":"QBP844219","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331762_qbp844219.jpg?v=1780191749"},{"product_id":"qbp448597","title":"TACO Marine 2-Rod Deluxe Poly Rod Rack, White Rack, UV-Stabilized Polyethylene, Knife and Plier Slots","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P03-062W is a white 2-rod Deluxe Poly Rod Rack for adding rod and tool storage to a boat cockpit, console side, leaning post, cabin wall, or other flat mounting area. It holds two rods, uses UV-stabilized polyethylene, and has a 1-3\/4 inch rod holder inside diameter. The rack measures 11-1\/2 inches across dimension A and 6-1\/2 inches across dimension B, which helps confirm fit before choosing the mounting location.\u003c\/p\u003e\u003cp\u003eThe slotted rod holders lock in most conventional and spinning outfits, helping keep gear organized between casts, during cleanup, or while the boat is moving at low speed. Integrated slots for a knife and plier keep common rigging tools close to the rods instead of loose in a tackle tray or on the deck.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-rod Deluxe Poly Rod Rack in white for organized rod and tackle storage on board.\u003c\/li\u003e\n\u003cli\u003eUV-stabilized polyethylene construction helps handle sun exposure around open cockpits, decks, and fishing stations.\u003c\/li\u003e\n\u003cli\u003eSlotted rod holders lock in most conventional and spinning outfits for everyday rod storage.\u003c\/li\u003e\n\u003cli\u003eFlared rod holder openings make rods easier to place and remove when hands are wet or busy with tackle.\u003c\/li\u003e\n\u003cli\u003eIntegrated knife and plier slots keep frequently used tools within reach near the rods.\u003c\/li\u003e\n\u003cli\u003e1-3\/4 inch rod holder inside diameter supports fit checks against existing rods and setups.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis rack suits flat mounting areas where two rods need to stay accessible without taking over cockpit or console space. The white finish works well with common fiberglass interiors and open fishing areas, while the compact two-rod layout is practical for smaller boats, secondary stations, or adding storage near a tackle prep area.\u003c\/p\u003e\u003cp\u003eBefore installation, check the 11-1\/2 inch and 6-1\/2 inch rack dimensions against the selected surface, confirm clearance for rod handles and reels, and keep the rack positioned where rods will not interfere with hatches, seating, walkways, or controls.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis rod rack is a straightforward match for anglers who want rods and rigging tools kept in one predictable spot during coastal fishing, bay runs, or dockside prep. It is especially useful where loose rods can clutter the cockpit or where a second storage point is needed away from the main rod holders.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023122428085,"sku":"QBP448597","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331553_qbp448597.jpg?v=1780191750"},{"product_id":"qbp749021","title":"TACO Marine Stand-Off Surface Mount Rod Holder, 0°, 12 in L, 1-3\/4 in ID, White UV-Stabilized HDPE, No Hardware","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P04-091W is a white stand-off surface mount rod holder for adding fixed rod storage to a boat without a recessed installation. It has a 1-3\/4\" inside diameter and is made from UV-stabilized high-density polyethylene, giving it a practical fit for exposed fishing areas where sun, spray, and daily use are part of the job.\u003c\/p\u003e\u003cp\u003eThis rod holder is built for straightforward surface mounting and uses integrated stand-offs to help it sit off the mounting surface. The front access hole makes it easier to reach the rod and manage removal, which is useful around cockpits, pontoons, docks, and other fishing setups where quick access matters.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-3\/4\" inside diameter for standard rod storage applications.\u003c\/li\u003e\n\u003cli\u003eWhite UV-stabilized high-density polyethylene construction for use in exposed marine areas.\u003c\/li\u003e\n\u003cli\u003eSurface mount layout adds rod storage without cutting a recessed holder into the deck or gunwale.\u003c\/li\u003e\n\u003cli\u003eFront access hole helps with rod retrieval when space around the holder is tight.\u003c\/li\u003e\n\u003cli\u003eIntegrated stand-offs simplify mounting and keep the holder positioned away from the mounting surface.\u003c\/li\u003e\n\u003cli\u003eHardware is not included, so fasteners can be selected to suit the boat surface, backing, and installation method.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis holder is a good match for adding rod storage to pontoon rails, cockpit areas, utility panels, dockside setups, or other suitable flat mounting locations where a surface-mounted holder makes more sense than a flush-mount style. Before drilling, confirm the available clearance for the rod angle, reel body, and handle movement.\u003c\/p\u003e\u003cp\u003eBecause mounting hardware is not included, use fasteners that match the substrate and the marine environment. On thin fiberglass, aluminum panels, or composite surfaces, backing plates or washers may be needed to spread the load and reduce flex around the mounting points.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis rod holder works well for anglers who need simple rod storage rather than a heavy-duty trolling holder. It is meant for keeping rods organized and accessible around the boat while fishing, rigging, or moving between spots.\u003c\/p\u003e\u003cp\u003eThe white finish keeps the look clean on many fiberglass and pontoon layouts, while the polyethylene body avoids the weight and finish maintenance of metal holders in storage-focused locations.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023122460853,"sku":"QBP749021","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331764_qbp749021.jpg?v=1780191750"},{"product_id":"qbp173187","title":"TACO Marine Stand-Off Surface Mount Rod Holder, 1-3\/4 in ID","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P04-0111W is a white stand-off surface mount rod holder for adding fixed rod storage to a boat without cutting a large tube-style opening into the mounting surface. It has a 1-3\/4 in. inside diameter and uses UV-stabilized high-density polyethylene, which makes it a practical fit for exposed cockpit, pontoon, console, or side-panel locations where sun, spray, and routine washdowns are part of normal use.\u003c\/p\u003e\u003cp\u003eThe stand-off layout keeps the rod holder raised from the surface, giving better clearance for the rod and reel than a flat clip-style holder. A front access hole helps with fastening during installation, and the included stainless-steel hardware is a useful detail for saltwater and freshwater boats where ordinary hardware can stain or corrode quickly.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStand-off surface mount format for permanent rod storage on suitable flat boat surfaces.\u003c\/li\u003e\n\u003cli\u003e1-3\/4 in. inside diameter for checking fit against the rod handles used on board.\u003c\/li\u003e\n\u003cli\u003eUV-stabilized high-density polyethylene construction in white for exposed marine locations.\u003c\/li\u003e\n\u003cli\u003eIntegrated standoffs help create clearance between the holder and the mounting surface.\u003c\/li\u003e\n\u003cli\u003eFront access hole supports cleaner fastening during installation.\u003c\/li\u003e\n\u003cli\u003eStainless-steel hardware is included for use in wet marine environments.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThis holder is meant for surface mounting, so installation starts with selecting a solid backing area that can take the fasteners and the load from stored rods. Common locations include pontoon rails with suitable panels, cockpit side panels, console sides, transom areas, and other flat surfaces where the rod will not interfere with seating, controls, lines, or walkways.\u003c\/p\u003e\u003cp\u003eBefore drilling, check the rod angle, handle diameter, reel clearance, and the space behind the mounting surface. The front access hole and stand-off shape make the install more straightforward than a flush-mounted tube holder, especially where access behind the panel is limited.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe key fit point is the 1-3\/4 in. inside diameter. It works as a storage holder for rods with handles that fit that opening, but the final fit should be checked against the actual rods used on the boat, especially larger offshore rods, rods with oversized grips, or setups with bulky reel seats.\u003c\/p\u003e\u003cp\u003eThis is a good match for boat owners who want tidy rod storage for fishing days, dockside organization, or keeping extra rods off the deck during coastal cruising and family boating. It is not an electronics or networked accessory, so there are no 12V, 24V, or NMEA integration requirements.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the holder with fresh water after saltwater use and during regular boat washdowns. Keeping sand, salt, and bait residue out of the holder helps the polyethylene surface stay clean and helps the stainless hardware remain in better condition over time.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWhite stand-off surface mount rod holder\u003c\/li\u003e\n\u003cli\u003eStainless-steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023122493621,"sku":"QBP173187","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331766_qbp173187.jpg?v=1780191751"},{"product_id":"qbp235544","title":"TACO Marine Striker Base Gunnel Mount Pair, For 1-1\/2 in Outrigger Poles, 316 Stainless Steel, 12 Locking Positions","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0150-F is a pair of Striker Base gunnel mounts for 1-1\/2\" outrigger poles, built for anglers who want to run outriggers from the gunnel instead of a T-top. Each mount uses a 45° arm and a polished Type 316L stainless steel base, giving the setup the corrosion resistance and clean deck appearance expected on saltwater fishing boats.\u003c\/p\u003e\u003cp\u003eThis mount set gives offshore and coastal trolling crews a practical way to position outriggers from an easy-to-reach location along the gunwale. The hex nut locking system gives 12 positions, including stand-up and lay-down positions, so the poles can be set for fishing and then moved out of the way when the deck needs to stay clear.\u003c\/p\u003e\u003cp\u003eThe base measures 5-3\/4\" long by 3-7\/8\" wide and installs through the gunnel with a 2\" hole saw. It is sold as a pair and is meant for use at trolling speeds only; the outrigger poles should be vertical when the boat is running.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 1-1\/2\" outrigger poles for gunnel-mounted trolling setups.\u003c\/li\u003e\n\u003cli\u003eSold in pairs for port and starboard installation.\u003c\/li\u003e\n\u003cli\u003ePolished Type 316L stainless steel construction helps resist corrosion in saltwater use.\u003c\/li\u003e\n\u003cli\u003e45° ambidextrous arms work on either port or starboard bases.\u003c\/li\u003e\n\u003cli\u003eHex nut locking system gives 12 positions, including stand-up and lay-down positions.\u003c\/li\u003e\n\u003cli\u003eRemovable arms help keep the deck more open when the outriggers are not in use.\u003c\/li\u003e\n\u003cli\u003eWelded locking adapter adds strength at the arm connection point.\u003c\/li\u003e\n\u003cli\u003eCompatible with Lee, Perko, and Rupp outrigger poles when the pole size matches the 1-1\/2\" mount.\u003c\/li\u003e\n\u003cli\u003eFor trolling-speed use only; the arm does not lock into the mount for running-speed operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis mount is installed through the gunnel, so the mounting surface needs enough structure to support outrigger loads while trolling. The lower base tube sits at a 45° angle, and the elliptical opening should be cut at 45° to the mounting surface. For this part number, the installation uses a 2\" hole saw.\u003c\/p\u003e\u003cp\u003eA marine sealant should be used between the base and mounting surface to help protect the deck core and reduce water intrusion. Through-bolting is preferred when the gunnel layout allows it, and backing plates are recommended for mounting surfaces that are 3\/4\" thick or less. Mounting hardware is not included, so bolt length should be selected to match the actual gunnel thickness.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis set is a practical match for fishing boats that need outrigger coverage without adding or modifying a T-top. The gunnel location keeps the controls within reach, which is useful when setting a spread, clearing lines, or moving between cockpit tasks during a trolling run.\u003c\/p\u003e\u003cp\u003eBecause the arms can be removed, the mounts are also useful on boats where cockpit space matters between fishing days. Once the arms are off, the deck area stays less cluttered for dockside work, cleaning, or general family use.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the mounts with fresh water and clean them with mild, non-abrasive soap. Avoid bleach, acids, strong degreasers, rubbing compounds, and abrasive cleaners, since those can damage the finish and shorten the life of the stainless surface.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2 Striker Base gunnel mount bases\u003c\/li\u003e\n\u003cli\u003e2 removable arms\u003c\/li\u003e\n\u003cli\u003eInstallation template\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023131701429,"sku":"QBP235544","price":802.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331192_qbp235544.jpg?v=1780191757"},{"product_id":"qbp456077","title":"TACO Marine Striker Base Gunnel Mount, For 1-1\/8 in Outrigger Poles, Cast 316 Stainless Steel, 12 Locking Positions, Pair","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0212-F is a Striker gunnel mount base set for 1-1\/8 inch outrigger poles, made for boats that need a clean, low-profile outrigger mounting point along the gunwale. It is sold in pairs and uses polished Type 316L stainless steel, which suits exposed saltwater locations where corrosion resistance matters.\u003c\/p\u003e\u003cp\u003eThis mount works with TACO Marine 1-1\/8 inch Tele-Outrigger poles and is also commonly used with Lee, Perko, and Rupp outrigger poles of the same size. The 45 degree ambidextrous arm can be used on port or starboard bases, while the removable arm helps keep the gunwale clear when the outriggers are not in use.\u003c\/p\u003e\u003cp\u003eThe hex nut locking design gives the setup 12 locking positions, including stand-up and lay-down positions for trolling. It is intended for trolling speeds only; outriggers should be placed in the vertical position when the boat is running at speed.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 1-1\/8 inch outrigger poles, including TACO Marine Tele-Outrigger poles and compatible Lee, Perko, and Rupp poles of the same diameter.\u003c\/li\u003e\n\u003cli\u003ePolished Type 316L stainless steel construction helps the bases hold up in saltwater, spray, and regular washdowns.\u003c\/li\u003e\n\u003cli\u003eHex nut locking design gives 12 positions for trolling layouts, including stand-up and lay-down configurations.\u003c\/li\u003e\n\u003cli\u003eAmbidextrous 45 degree arm works with both port and starboard bases, which helps simplify installation and spare-part planning.\u003c\/li\u003e\n\u003cli\u003eRemovable arm keeps the gunwale more open when the outrigger setup is not being used.\u003c\/li\u003e\n\u003cli\u003eSold in pairs for matching port and starboard outrigger mounting points.\u003c\/li\u003e\n\u003cli\u003eBacked by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis gunnel mount is a good fit for smaller sportfishing boats, center consoles, and skiffs where a full outrigger base needs to sit close to the gunwale rather than on a hardtop or tower. Before drilling, check that the mounting area has enough backing, clearance below the gunwale, and room for the arm to move through the positions you plan to use while trolling.\u003c\/p\u003e\u003cp\u003eBecause the arm is removable, the bases can stay installed while the deck edge remains easier to move around, clean, and cover. This is useful on boats where the same gunwale area is used for fishing, docking, boarding, or storage.\u003c\/p\u003e\u003ch6\u003eCompatibility and use on board\u003c\/h6\u003e\u003cp\u003eThe F16-0212-F is meant for 1-1\/8 inch outrigger systems, so pole diameter is the first fit point to confirm. It suits trolling setups where the crew needs adjustable spreader positions without adding a large above-deck mechanism.\u003c\/p\u003e\u003cp\u003eFor safe operation, use the bases at trolling speeds and return the outriggers to the vertical position before running the boat at speed. That detail matters on open water, where wind load, vibration, and boat motion can put extra strain on outrigger hardware.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the stainless steel bases with fresh water and wipe away salt deposits around the locking surfaces and mounting area. Periodic inspection of the fasteners, backing area, and moving parts helps keep the outrigger setup secure through regular fishing use.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023131734197,"sku":"QBP456077","price":413.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331730_qbp456077.jpg?v=1780191757"},{"product_id":"qbp407312","title":"TACO Marine Rod Tip Holder \u0026 Rod Hanger Kit, Type-316L SS, Delrin Inserts","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-2700-1 is a polished stainless steel single rod hanger kit for storing one fishing rod securely on board. It uses a spring-lock rod tip holder and a stationary hanger to keep the rod in place while the boat is moving, with a clean installation that hides the mounting screws.\u003c\/p\u003e\u003cp\u003eThis hanger accepts rod butts up to 1-1\/2 inches in diameter, making it useful for many common saltwater and freshwater fishing rods. The high-polished Type 316L stainless steel finish suits visible mounting locations such as under a gunwale, inside a rod locker, on a bridge overhead, or along a cockpit storage area.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSpring-lock rod tip holder helps keep the rod seated during cruising, trailering, or rough dockside movement.\u003c\/li\u003e\n\u003cli\u003eAccepts rod butts up to 1-1\/2 inches in diameter for broad compatibility with common fishing rod handles.\u003c\/li\u003e\n\u003cli\u003eHigh-polished Type 316L stainless steel construction is a strong fit for saltwater environments and exposed boat storage areas.\u003c\/li\u003e\n\u003cli\u003eConcealed fasteners and recessed mounting holes give the installation a finished look once mounted.\u003c\/li\u003e\n\u003cli\u003eDelrin inserts help support the rod contact points without a bare-metal feel.\u003c\/li\u003e\n\u003cli\u003eCan be mounted vertically, horizontally, or overhead, depending on the available storage space on the boat.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and mounting\u003c\/h6\u003e\u003cp\u003eThe hanger works well where rods need to be stored out of the way but still easy to reach, such as under gunwales, inside lockers, on hardtop or bridge overheads, and in cockpit storage zones. Before drilling, check that the selected surface has enough backing strength for the rod weight and the movement expected underway.\u003c\/p\u003e\u003cp\u003eBecause the mounting holes are recessed and the screws are concealed after installation, the finished setup looks tidy on visible surfaces. For fiberglass or cored panels, seal drilled holes properly to keep water out of the laminate or core.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a practical match for anglers who want a fixed rod storage point without using deck space or leaning rods against the console, transom, or cabin side. It is especially useful on fishing boats, center consoles, bay boats, and cruising boats where rods need to stay organized between runs, during dockside rigging, or while the boat is stored.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023131930805,"sku":"QBP407312","price":101.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331868_qbp407312.jpg?v=1780191760"},{"product_id":"qbp591308","title":"TACO Marine 2-Rod Hanger Rack, Polished Stainless Steel, White UV-Stabilized Poly Rack, 1-1\/2 in x 9-1\/8 in","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-2751-1 is a 2-rod hanger rack for keeping fishing rods secured and organized on board, with polished stainless steel hardware and white UV-stabilized poly racks. It is sized at 1-1\/2 inches wide by 9-1\/8 inches long and supplied as a pair, giving you a clean two-position storage setup for rod and reel combinations.\u003c\/p\u003e\u003cp\u003eThis rack uses a patented spring-lock rod tip holder to help keep rods in position while the boat is docked, under way, or being prepared for the next trip. The high-polished Type 316L stainless steel works well in exposed marine areas, while the poly rack supports help separate and cradle the rods without making the installation look bulky.\u003c\/p\u003e\u003cp\u003eIt suits cockpit, cabin, console, leaning post, dockside, garage, or tackle-station storage where rods need to stay off the deck and easy to reach. The rack can be mounted vertically, horizontally, or overhead, so it can be worked into tight boat layouts without forcing a single storage orientation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds two fishing rods in a clean rack format for organized rod and reel storage.\u003c\/li\u003e\n\u003cli\u003ePatented spring-lock rod tip holder helps keep rods locked in position during storage and movement around the boat.\u003c\/li\u003e\n\u003cli\u003eHigh-polished Type 316L stainless steel components suit saltwater and exposed deck environments.\u003c\/li\u003e\n\u003cli\u003eWhite UV-stabilized poly racks stand up to sun exposure and keep the storage area looking neat.\u003c\/li\u003e\n\u003cli\u003ePre-drilled recessed mounting holes help simplify installation and keep fasteners seated cleanly.\u003c\/li\u003e\n\u003cli\u003eConcealed fastener layout and beveled rack edges give the finished installation a tidy appearance.\u003c\/li\u003e\n\u003cli\u003eMounts vertically, horizontally, or overhead for use in cockpits, cabins, garages, docks, and fishing stations.\u003c\/li\u003e\n\u003cli\u003eFlush-mount rack style keeps rods close to the mounting surface instead of projecting far into walkways.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe rack mounts with recessed holes, so the surface should be flat, solid, and suitable for fasteners before installation. Common locations include bulkheads, console sides, cabin walls, under hardtops, dock panels, and storage areas where rods can sit clear of feet, hatches, and moving gear.\u003c\/p\u003e\u003cp\u003eBecause the rack can be installed in more than one orientation, check rod length, reel clearance, and nearby traffic paths before drilling. Overhead mounting can help save wall space, while vertical or horizontal mounting may be easier to access when rods are used often during fishing days.\u003c\/p\u003e\u003ch6\u003eMaterials and marine use\u003c\/h6\u003e\u003cp\u003eThe polished stainless and white poly finish gives this rack a clean look that fits many center consoles, sport-fishing boats, pontoons, and utility storage areas. Type 316L stainless steel is a practical choice for marine hardware, especially where spray, damp air, and washdowns are part of normal use.\u003c\/p\u003e\u003cp\u003eFor best long-term appearance, rinse salt and dirt from the rack during routine boat cleaning and avoid leaving abrasive grit trapped against the polished stainless or poly surfaces.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis 2-rod rack is a good match for boaters who want a fixed storage point for a small rod set rather than loose rods leaning in a corner or lying across the deck. It works especially well for keeping frequently used rods staged near the cockpit, helm area, cabin entry, or dockside rigging station.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023131963573,"sku":"QBP591308","price":202.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331219_qbp591308.jpg?v=1780191760"},{"product_id":"qbp329888","title":"TACO Marine 3-Rod Hanger Rack, Polished SS316L, White Poly Rack","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-2753-1 is a 3-rod hanger rack for storing fishing rods securely on board, with a polished stainless and white poly layout that suits exposed cockpit, cabin, dock box, garage, or tackle-station installations. It holds three rods and measures 13-1\/2 inches long by 1-1\/2 inches wide, giving boat owners a tidy way to keep spinning, casting, and conventional rods off the deck and ready for use.\u003c\/p\u003e\u003cp\u003eThe hanger uses high-polished Type-316L stainless steel with white poly racks made from UV-stabilized material. A patented rod-tip holder with a spring-lock design helps keep rods in position, which is useful when the boat is moving, stored on a lift, or running through chop.\u003c\/p\u003e\u003cp\u003eThis is a surface-style rod storage system that can mount vertically, horizontally, or overhead. The rack has pre-drilled recessed mounting holes, beveled edges, and concealed fastener styling for a clean installation where visible hardware and rough edges would stand out.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds three fishing rods in a compact rack layout for cockpit, cabin, overhead, or dockside storage.\u003c\/li\u003e\n\u003cli\u003eHigh-polished Type-316L stainless steel supports long-term use in wet marine environments.\u003c\/li\u003e\n\u003cli\u003eWhite poly racks use UV-stabilized material to handle sun exposure on open boats and near windows.\u003c\/li\u003e\n\u003cli\u003ePatented spring-lock rod-tip holder helps keep rods seated during storage and while the vessel is underway.\u003c\/li\u003e\n\u003cli\u003ePre-drilled recessed mounting holes make installation straightforward on a suitable flat mounting surface.\u003c\/li\u003e\n\u003cli\u003eConcealed fastener styling and beveled edges help the rack sit cleanly against the mounting area.\u003c\/li\u003e\n\u003cli\u003eMounts vertically, horizontally, or overhead, so it can be placed where rod access and deck space work best.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003ePlan the mounting location around the length of the rods, reel clearance, and the way people move through the boat. This rack works well where rods need to be stored flat against a bulkhead, under a hardtop, inside a cabin, or along a protected side panel without creating a trip point on deck.\u003c\/p\u003e\u003cp\u003eThe rack should be fastened to a solid surface that can support the rods and handle vibration. Before drilling, check for wiring, plumbing, liner gaps, or hardware behind the panel, then dry-fit the rack with rods in place to confirm tip and reel alignment.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis hanger is a practical match for anglers who want fixed rod storage rather than loose rods in the cockpit or cabin. It is especially useful on center consoles, walkarounds, pilothouse boats, and fishing-focused cruisers where rods are carried often but need to stay organized between runs.\u003c\/p\u003e\u003cp\u003eThe spring-lock tip holder is helpful when rods are stored while the boat is moving, and the polished stainless and white rack finish gives the installation a finished look near other deck hardware and fishing accessories.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the rack with fresh water after saltwater use, especially around the spring-lock holder and mounting area. A mild boat soap and soft cloth are enough for routine cleaning; avoid harsh abrasives that can dull the polished stainless surface or mark the poly rack.\u003c\/p\u003e\u003cp\u003eCheck the mounting screws during seasonal maintenance and after rough runs. Keeping the fasteners tight and the rack clean helps protect both the storage system and the rods it holds.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023131996341,"sku":"QBP329888","price":314.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331773_qbp329888.jpg?v=1780191761"},{"product_id":"qbp124413","title":"TACO Marine 4-Rod Hanger Rack, Polished 316L SS, White Poly Rack, Spring-Lock","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-2752-1 is a 4-rod hanger rack made for secure rod and reel storage on boats where space is tight and gear needs to stay put. It uses polished Type 316 stainless steel rod hanger components with white UV-stabilized polymer racks, giving the rack a clean look while handling the salt, sun, and washdown-prone areas common around fishing boats.\u003c\/p\u003e\u003cp\u003eThis rack measures 18 inches long with a 1-1\/2 inch width and is sold as a pair. The spring-lock rod tip holder helps keep rods seated in position, which is useful when the boat is moving, when rods are stored under gunnels, or when overhead storage is used on a bridge, cabin, locker, or covered cockpit area.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStores up to four rods in a space-saving hanger layout for rod lockers, bridge overheads, under-gunnel areas, cabins, garages, or dockside storage spaces.\u003c\/li\u003e\n\u003cli\u003ePolished Type 316 stainless steel components suit marine environments where corrosion resistance matters.\u003c\/li\u003e\n\u003cli\u003eWhite UV-stabilized polymer racks help resist sun exposure and keep the installation looking clean.\u003c\/li\u003e\n\u003cli\u003eSpring-lock rod tip holder keeps rod tips secured instead of letting rods slide or bounce free while underway.\u003c\/li\u003e\n\u003cli\u003ePre-drilled racks with recessed mounting holes simplify installation and keep fasteners neatly seated.\u003c\/li\u003e\n\u003cli\u003eSmooth beveled rack edges give the mounted setup a finished look without sharp visual transitions.\u003c\/li\u003e\n\u003cli\u003eCan be mounted vertically, horizontally, or overhead, giving flexibility for different storage spaces on board.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe rack is built for fixed mounting to a solid surface, so placement should be checked against rod length, reel clearance, and nearby hatches or seating before drilling. Its 18 inch length makes it useful where four rods need to be stored together without taking up deck space.\u003c\/p\u003e\u003cp\u003eFor best results on board, mount it to a backing surface that can handle the load of the stored rods and reels. In saltwater use, stainless mounting hardware and proper bedding around drilled holes help protect the mounting surface from moisture intrusion.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis hanger rack is a practical fit for anglers who want rods organized between runs, during transport, or when the boat is back at the dock. It works well for keeping rod and reel combos off the deck, away from foot traffic, and grouped in one easy-to-reach storage location.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003ePair of 4-rod hanger racks\u003c\/li\u003e\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023132029109,"sku":"QBP124413","price":398.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331777_qbp124413.jpg?v=1780191761"},{"product_id":"qbp971734","title":"TACO Marine 3-Rod Aluminum Rod Rack, For Light Tackle Spinning Rod\/Reel Combos, 8-1\/2 in H x 12 in W, 1-1\/2 in ID, Brushed Anodized Aluminum","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F31-3003BSA-1 is a surface-mount 3-rod aluminum rack for storing light tackle spinning rod and reel combos on board. It measures 8-1\/2 inches high by 12 inches wide and uses 1-1\/2 inch rod holder openings, giving anglers a tidy place to keep up to three setups ready without taking over deck or cockpit space.\u003c\/p\u003e\u003cp\u003eThe rack has a brushed anodized aluminum finish for a clean match with common boat hardware, along with hidden fasteners that keep the installed face neat. A slotted holder layout helps lock rods and reels in place, while the form-fitted black PVC liner gives the rods a protected contact surface inside the holder openings.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds up to three light tackle spinning rod and reel combos in one surface-mounted rack.\u003c\/li\u003e\n\u003cli\u003e8-1\/2 inch height and 12 inch width help it fit bulkheads, console sides, cockpit areas, leaning posts, and other flat mounting locations.\u003c\/li\u003e\n\u003cli\u003e1-1\/2 inch rod holder inside diameter supports compatible rod handles without oversizing the rack.\u003c\/li\u003e\n\u003cli\u003eBrushed anodized aluminum finish gives the rack a finished look that works well with marine hardware and boat interiors.\u003c\/li\u003e\n\u003cli\u003eHidden fasteners keep screw heads out of sight after installation for a cleaner mounted appearance.\u003c\/li\u003e\n\u003cli\u003eSlotted openings help rods and reels stay seated when the boat moves or when gear is handled between casts.\u003c\/li\u003e\n\u003cli\u003eForm-fitted black PVC liner helps reduce direct contact between rod handles and the aluminum holder body.\u003c\/li\u003e\n\u003cli\u003eCovered by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis rack is a good match for boats that need rod storage in a compact, visible spot rather than a recessed gunwale holder. It is meant for a flat mounting surface, so common locations include the side of a console, a cockpit bulkhead, a cabin wall, a dock box area, or a tackle station where rods need to stay organized and easy to grab.\u003c\/p\u003e\u003cp\u003eBefore drilling, check that the 12 inch width and 8-1\/2 inch height clear nearby hatches, cushions, rails, and walking paths. The mounting surface should be strong enough to support the loaded rack, especially where vibration, wave impact, and repeated rod handling are part of normal use.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eFor inshore fishing, bay boats, center consoles, pontoons, and small cruisers, this rack keeps light spinning outfits grouped together instead of leaning loose against seats or coamings. It also works well as dockside or garage storage for rods that move between the boat and shore.\u003c\/p\u003e\u003cp\u003eThe brushed aluminum face makes sense where the rack will be seen, not hidden away in a locker. It suits owners who want organized rod storage with a finished appearance and simple access during a fishing day.\u003c\/p\u003e\u003ch6\u003eCare and maintenance\u003c\/h6\u003e\u003cp\u003eRinse the rack with fresh water after saltwater use and wipe away grit around the liner openings so rod handles slide in cleanly. Check the mounting hardware from time to time, especially after trailering or rough-water runs, to make sure the rack remains tight against the mounting surface.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023132061877,"sku":"QBP971734","price":239.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331223_qbp971734.jpg?v=1780191761"},{"product_id":"qbp380613","title":"TACO Marine 4-Rod Aluminum Rod Rack, Brushed Aluminum, 16 in, 1-1\/2 in ID","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F31-3004BSA-1 is a brushed aluminum 4-rod rack for clean, secure storage of light tackle spinning rod and reel combos on board. It holds four rods in a single surface-mount rack, with a 16 inch length and 1-1\/2 inch rod holder diameter to help confirm fit before installation.\u003c\/p\u003e\u003cp\u003eThis rack is a practical choice for keeping rods organized in a cockpit, leaning post area, transom zone, cabin, or garage storage setup where quick access matters. The slotted holder layout helps keep rods and reels seated while the boat is moving, and the hidden fastener layout keeps the installed look clean without exposed mounting hardware interrupting the brushed finish.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds up to four light tackle spinning rod and reel combos in one organized rack.\u003c\/li\u003e\n\u003cli\u003eBrushed aluminum construction gives the rack a clean finish suited to visible cockpit, deck, or storage areas.\u003c\/li\u003e\n\u003cli\u003eHidden fasteners keep the face of the rack clean after installation.\u003c\/li\u003e\n\u003cli\u003eSlotted rod holders help lock rods and reels in place during normal boat movement.\u003c\/li\u003e\n\u003cli\u003eForm-fitted black PVC liners help separate rods from the aluminum holder surface.\u003c\/li\u003e\n\u003cli\u003e16 inch overall length and 1-1\/2 inch holder diameter help with layout checks before mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is a surface-mount rod storage rack, so the mounting area should be flat, accessible, and strong enough to support the rack and loaded rods while the boat is underway. Before drilling, check the rod angle, reel clearance, nearby cushions, hatches, coamings, and walkways so the stored rods do not interfere with fishing or movement around the boat.\u003c\/p\u003e\u003cp\u003eThe hidden-fastener layout is useful where appearance matters, such as open cockpit areas, helm-adjacent storage, or a clean garage display wall. As with any deck or bulkhead installation, use hardware and sealant appropriate for the mounting surface and the marine environment.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis rack suits anglers who want rods kept together, visible, and easy to grab without loose gear sliding around the deck. It works especially well for light tackle spinning setups used for coastal fishing, inshore trips, dockside prep, or keeping backup rods organized between runs.\u003c\/p\u003e\u003cp\u003eThe brushed aluminum finish gives the rack a finished look for boats where storage hardware is visible, while the slotted holder design keeps the focus on practical rod control rather than decoration.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023132094645,"sku":"QBP380613","price":339.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331390_qbp380613.jpg?v=1780191762"},{"product_id":"qbp926122","title":"TACO Marine 3-Rod Bungee Rod Holder, White UV-Stabilized HDPE, 12-1\/2 in x 3-3\/4 in","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P03-133W is a white 3-rod poly bungee rod holder rack for keeping fishing rods stored under the gunnel or on a vertical mounting surface. It holds up to three rods in a compact 12-1\/2 in. length and 3-3\/4 in. depth, with a 1\/2 in. thick body that fits cleanly into tight storage areas where loose rods would otherwise slide around or take up deck space.\u003c\/p\u003e\u003cp\u003eThe rack is made from UV-stabilized high-density polyethylene, so it is suited to exposed boat storage areas where sun, spray, and routine washdowns are part of normal use. Adjustable bungee cords help keep rods seated while the boat is moving, trailering, or running through chop.\u003c\/p\u003e\u003cp\u003eThis is a practical fit for anglers who want quick access to rods without adding flush-mount holders or drilling large holes through the deck or gunwale. It works well for center consoles, bay boats, pontoons, and small fishing boats where under-gunnel storage helps keep the cockpit clear.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStores up to three fishing rods under the gunnel, along a bulkhead, or on another suitable flat mounting surface.\u003c\/li\u003e\n\u003cli\u003eAdjustable bungee retention helps keep rods in place while the boat is underway or being transported.\u003c\/li\u003e\n\u003cli\u003eUV-stabilized high-density polyethylene body stands up to sun exposure in marine storage areas.\u003c\/li\u003e\n\u003cli\u003eWhite finish blends well with common boat interiors, liners, and under-gunnel areas.\u003c\/li\u003e\n\u003cli\u003eCompact 12-1\/2 in. length and 3-3\/4 in. depth help preserve cockpit and storage space.\u003c\/li\u003e\n\u003cli\u003eMounting backing plate and hardware are included for a straightforward installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eMount the rack where the rods can sit securely without interfering with hatches, seating, wiring, steering lines, or other gear. Under-gunnel mounting is the most common boat use, but the rack can also be used on a garage wall or dockside storage area when the surface is suitable for the supplied hardware.\u003c\/p\u003e\u003cp\u003eBefore drilling, position the rack with the rods in place to confirm handle clearance, reel clearance, and access to the bungee cords. A backing plate is included, which is useful when mounting through thinner panels or areas that benefit from a wider load spread.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis rod rack is well suited to boats that need simple rod organization without adding a permanent vertical rod launcher or leaning rods against the console. It helps keep rods off the deck during coastal fishing, dockside prep, trailering, and short runs between fishing spots.\u003c\/p\u003e\u003cp\u003eThe bungee layout makes it useful for everyday storage rather than active trolling or rod deployment. Rods stay close at hand, but the rack is meant for stowing gear safely and neatly when the rods are not in use.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3-rod poly bungee rod holder rack\u003c\/li\u003e\n\u003cli\u003eMounting backing plate\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023132127413,"sku":"QBP926122","price":89.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331227_qbp926122.jpg?v=1780191762"},{"product_id":"qbp358389","title":"TACO Marine Reel Hangers with Rod Tip Holder Kit, SS316L, Adjusts 1.875 to 3.875 in","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-2810-1 is a stainless steel adjustable reel hanger kit with a rod tip holder for storing trolling reels and rods on a boat or in a dedicated tackle storage area. The reel hanger adjusts from 1.875\" to 3.875\", measures 1-1\/16\" wide by 4\" long, and has a highly polished finish that fits cleanly into visible cockpit, gunnel, cabin, or garage installations.\u003c\/p\u003e\u003cp\u003eThis kit is built around Type 316L stainless steel hardware for use in marine spaces where salt air, washdowns, and humidity are part of the routine. Spring-loaded pins help keep reels seated in the hanger, while the snap-lock rod tip holder keeps the rod tip controlled so the setup stays organized during runs or while the boat is at the dock.\u003c\/p\u003e\u003cp\u003eThe hanger can be mounted vertically, horizontally, or overhead, giving anglers flexibility when working around existing rod storage, hardtop structure, gunnel space, or ceiling panels. Concealed installation screws keep the mounted look clean, and Delrin inserts help protect rod guides and tips from scuffs during storage.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAdjustable reel hanger range from 1.875\" to 3.875\" for fitting many popular trolling reels.\u003c\/li\u003e\n\u003cli\u003eType 316L stainless steel construction with a highly polished finish for marine storage areas exposed to moisture and salt air.\u003c\/li\u003e\n\u003cli\u003eSpring-loaded reel retention helps keep reels secure when the boat is moving or stored between trips.\u003c\/li\u003e\n\u003cli\u003eSnap-lock rod tip holder keeps the rod tip in position and helps reduce loose gear movement.\u003c\/li\u003e\n\u003cli\u003eDelrin inserts help protect rod guides and tips where they contact the holder.\u003c\/li\u003e\n\u003cli\u003eMounts vertically, horizontally, or overhead for use on gunnels, ceilings, storage panels, or other suitable flat mounting areas.\u003c\/li\u003e\n\u003cli\u003eConcealed installation screws leave a cleaner finished appearance after mounting.\u003c\/li\u003e\n\u003cli\u003eCovered by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis reel hanger is a practical fit for anglers who want trolling reels stored where they are easy to reach but not loose in the cockpit or cabin. Before drilling, check the reel width against the 1.875\" to 3.875\" adjustment range and confirm that the selected mounting surface has enough backing and clearance for the reel, rod tip, and hand access.\u003c\/p\u003e\u003cp\u003eThe 3.162\" center-to-center hole spacing is useful when laying out the mount or replacing an existing storage fitting. For overhead or vertical mounting, take time to test the rod and reel position before final installation so the rod tip holder lines up naturally with the rod and does not put strain on the guides.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis kit suits fishing boats that carry trolling outfits and need a neater way to store reels between runs, at the dock, or during transport. It also works well in a home tackle room or garage when the same rod and reel setup needs to stay protected and ready for the next trip.\u003c\/p\u003e\u003ch6\u003eMaterials and care\u003c\/h6\u003e\u003cp\u003eThe stainless steel and Delrin contact points are well matched to marine storage, but regular care still matters. Rinse away salt residue after heavy spray or washdowns, wipe the polished surface dry when possible, and check the spring-loaded parts during routine cleaning so the hanger continues to open and retain the reel smoothly.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023132160181,"sku":"QBP358389","price":124.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331233_qbp358389.jpg?v=1780191763"},{"product_id":"qbp426553","title":"TACO Marine Clamp-On Adjustable Rod Holder, Type-316L Stainless Steel, 1-5\/8 in ID","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Stainless Steel Clamp-On Adjustable Rod Holder is a polished Type 316L stainless steel rod holder for adding secure rod storage to existing rail, pipe, or tube locations without welding or fabrication. It is made for clamp-on installation on vertical or horizontal pipe and tube, with a rod holder inside diameter of 1-5\/8 inches and a form-fitted white PVC liner to help protect the rod finish.\u003c\/p\u003e\u003cp\u003eThis holder is especially useful around T-tops, leaning posts, poling platforms, bow rails, and other fishing stations where a fixed rod holder is not already in place. The clamp system uses inserts for the supported rail size, and the holder rotates and locks every 18 degrees so the rod angle can be set for trolling, drifting, storage, or keeping a rig ready while working the deck.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePolished Type 316L stainless steel construction for use in saltwater fishing environments.\u003c\/li\u003e\n\u003cli\u003eClamp-on mounting avoids welding and keeps installation practical on existing boat rail, pipe, or tube.\u003c\/li\u003e\n\u003cli\u003eWorks on vertical or horizontal mounting points, depending on the available structure on board.\u003c\/li\u003e\n\u003cli\u003eRotates and locks every 18 degrees for controlled rod angle placement.\u003c\/li\u003e\n\u003cli\u003eForm-fitted white PVC liner helps reduce contact between the rod and stainless steel holder.\u003c\/li\u003e\n\u003cli\u003e1-5\/8 inch rod holder inside diameter fits many common fishing rod handles.\u003c\/li\u003e\n\u003cli\u003eAvailable in two clamp size configurations for different pipe and tube diameters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis clamp-on adjustable rod holder is offered in two size configurations, so the main difference is the outside diameter of the rail, pipe, or tube the clamp fits.\u003c\/p\u003e\u003cp\u003eBoth versions share the same polished stainless steel construction, adjustable locking angle, clamp-on mounting style, and 1-5\/8 inch rod holder inside diameter.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eF16-2623POL-1: Fits 1-1\/16 inch and 1-5\/16 inch outside diameter pipe, and 1-1\/4 inch outside diameter tube. This size is commonly used on T-top rings, leaning posts, and poling platforms where larger pipe or tube is present.\u003c\/li\u003e\n\u003cli\u003eF16-2600POL-1: Fits 7\/8 inch and 1 inch outside diameter tube. This size suits smaller stainless tube locations, including many bow rail and rail-mounted fishing setups.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMounting is handled with the clamp around the supported tube or pipe size, so the first step is confirming the outside diameter of the mounting point on the boat. A small difference in rail size matters here, especially when working with stainless bow rails, T-top frames, or custom-fabricated pipework.\u003c\/p\u003e\u003cp\u003eOnce clamped in place, the holder can be rotated to the preferred fishing angle and locked into one of the 18-degree positions. This makes it easier to keep rods angled away from canvas, antennas, passengers, or other gear while still keeping them within reach.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis rod holder fits boats that need more rod positions without cutting into the gunwale or adding permanent welded hardware. It works well for fishing boats, center consoles, bay boats, and work areas around T-tops, leaning posts, poling platforms, and bow rails.\u003c\/p\u003e\u003cp\u003eIt is a practical match for owners who want a stainless holder that can be added to an existing rail location while keeping rod angle adjustment available for different fishing styles and deck layouts.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"1\/16\" \u0026 5\/16","offer_id":52023132192949,"sku":"QBP426553-V0","price":219.99,"currency_code":"USD","in_stock":true},{"title":"7\/8\" \u0026 1\"","offer_id":52023132225717,"sku":"QBP426553-V6","price":207.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335294_qbp426553.webp?v=1780191763"},{"product_id":"qbp189091","title":"TACO Marine Clamp-On Adjustable Rod Holder, 1-11\/16 in to 1-15\/16 in Pipe, SS316L, Polished","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-2630POL-1 is a polished Type 316 stainless steel clamp-on adjustable rod holder for adding secure rod storage to 1-11\/16\" and 1-15\/16\" O.D. pipe on a T-top, leaning post, or poling platform leg.\u003c\/p\u003e\u003cp\u003eIt works on vertical or horizontal pipe and lets the rod angle rotate and lock in 18-degree increments, so the holder can be set for trolling, drifting, storage, or quick access while fishing. The rod holder has a 1-5\/8\" inside diameter and includes a form-fitted white PVC liner to help cushion the rod and reduce contact against the stainless steel tube.\u003c\/p\u003e\u003cp\u003eThe clamp-on layout is a practical fit for boats where drilling into a hardtop frame or rail is not preferred. It gives anglers a clean way to add another rod position on existing pipework while keeping the installation removable and adjustable.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 1-11\/16\" and 1-15\/16\" O.D. pipe, making it suitable for common T-top, leaning post, and poling platform leg installations.\u003c\/li\u003e\n\u003cli\u003eClamp-on mounting supports installation on vertical or horizontal pipe without cutting into the boat structure.\u003c\/li\u003e\n\u003cli\u003eRotates and locks every 18 degrees so the fishing angle can be set to match the rod position and use on board.\u003c\/li\u003e\n\u003cli\u003ePolished Type 316 stainless steel construction stands up well to saltwater exposure, spray, and regular washdowns.\u003c\/li\u003e\n\u003cli\u003e1-5\/8\" rod holder inside diameter works with many conventional fishing rod handles.\u003c\/li\u003e\n\u003cli\u003eForm-fitted white PVC liner helps protect the rod handle and gives the holder a cleaner finished interior.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore installation, measure the outside diameter of the pipe where the holder will be mounted. This model is made for 1-11\/16\" and 1-15\/16\" O.D. pipe, so it should be matched to the actual tube size rather than the general rail or frame description.\u003c\/p\u003e\u003cp\u003eThe clamp can be positioned on a vertical leg or a horizontal tube, which gives flexibility on center consoles, fishing boats, and other vessels with exposed pipework. Once mounted, the locking angle can be set to keep the rod accessible without interfering with movement around the helm, cockpit, or aft deck.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis rod holder suits anglers who need an added rod position without replacing existing hardware or committing to a permanent drilled mount. It is useful for keeping a spare setup ready, spreading rods while fishing, or adding storage to a T-top or leaning post where factory rod holders are limited.\u003c\/p\u003e\u003cp\u003eBecause the holder is stainless steel with a polished finish, it pairs naturally with other polished rail hardware and T-top tubing. The PVC liner is especially useful when rods are moved in and out often during a fishing day.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the holder with fresh water after saltwater use, especially around the clamp, liner, and locking area. A mild boat soap and soft cloth help preserve the polished finish without scratching the stainless steel surface.\u003c\/p\u003e\u003cp\u003eCheck the clamp hardware periodically, particularly after trailering, rough runs, or heavy rod loads. Keeping the mounting point clean and properly tightened helps the holder stay secure during regular use.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023132258485,"sku":"QBP189091","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331237_qbp189091.jpg?v=1780191764"},{"product_id":"qbp840544","title":"TACO Marine Fixed Clamp-On Center Rigger Mount, 1-1\/8 in, 3\/4 in \u0026 1 in Pipe, SS316","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0311C-1 is a fixed-angle clamp-on center rigger mount for adding a center line to a compatible T-top fishing setup. It clamps to 3\/4\" and 1\" schedule-40 pipe, as well as 1-1\/4\" O.D. tube, giving boat owners a practical way to add a center rigger without changing the main T-top structure.\u003c\/p\u003e\u003cp\u003eThe mount is made from 316 marine grade stainless steel, a strong match for saltwater fishing boats where spray, sun, and vibration are part of normal use. It accepts 1-1\/8\" center rigger poles, including TACO OC Series aluminum center rigger poles, so it works well for anglers adding another trolling position offshore or along the coast.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFixed-angle clamp-on center rigger mount for adding a center trolling line to a T-top setup.\u003c\/li\u003e\n\u003cli\u003e316 marine grade stainless steel construction for saltwater corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eFits 3\/4\" and 1\" schedule-40 pipe, plus 1-1\/4\" O.D. tube.\u003c\/li\u003e\n\u003cli\u003eAccepts 1-1\/8\" center rigger poles, including TACO OC Series aluminum center rigger poles.\u003c\/li\u003e\n\u003cli\u003eClamp-on mounting makes it useful for compatible existing T-tops where a fixed center rigger position is preferred.\u003c\/li\u003e\n\u003cli\u003eAnti-rotation set screw helps keep the mount steady once positioned on the pipe or tube.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis mount is intended for the hoop area of many standard T-tops and hard tops with compatible pipe or tube sizing. Before installation, measure the outside diameter and confirm the pipe type on the boat, since IPS pipe and O.D. tube measurements are not the same thing.\u003c\/p\u003e\u003cp\u003eBecause it uses a fixed angle, the final mounting position matters. Place the mount where the center rigger pole can clear antennas, hardtop canvas, rocket launchers, lights, and any other top-mounted gear through the full fishing range.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis center rigger mount suits fishing boats that need another line in the spread for offshore trolling, coastal runs, or serious weekend fishing. It is a good match for owners who already have a compatible T-top structure and want a clean, stainless mounting point for a 1-1\/8\" center rigger pole.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023132389557,"sku":"QBP840544","price":190.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331269_qbp840544.jpg?v=1780191765"},{"product_id":"qbp448279","title":"TACO Marine Deluxe 4-Rod Pontoon Boat Tackle Rack, Surface Mount, 23-1\/4 in L, White HDPE","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P03-074W is a white 4-rod deluxe pontoon boat rod and tackle rack made for keeping rods and reels within easy reach while freeing up deck and seating space. It holds up to four rods and works with both spinning and conventional tackle, making it a practical storage point for pontoon anglers who want gear organized before the next drift, cast, or run across the lake.\u003c\/p\u003e\u003cp\u003eThe rack is made from UV-stabilized high-density polyethylene, a good fit for exposed boat areas where sun, spray, and regular washdowns are part of normal use. Stainless steel fasteners help reduce rust and corrosion concerns, and the rack measures 4 in. deep by 24-1\/4 in. long for a compact surface-mounted layout.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStores up to four rods for quick access on pontoon boats and fishing setups with limited open deck space.\u003c\/li\u003e\n\u003cli\u003eHandles spinning and conventional tackle, so mixed rod and reel setups can stay together in one rack.\u003c\/li\u003e\n\u003cli\u003eUV-stabilized high-density polyethylene construction suits exposed cockpit, rail, or pontoon furniture areas.\u003c\/li\u003e\n\u003cli\u003eStainless steel fasteners help resist rust and corrosion in wet marine environments.\u003c\/li\u003e\n\u003cli\u003eWhite finish blends well with many pontoon interiors, seat bases, and fiberglass or vinyl trim areas.\u003c\/li\u003e\n\u003cli\u003eCompact 4 in. depth helps keep rods organized without taking over usable seating or walkway space.\u003c\/li\u003e\n\u003cli\u003eEasy assembly supports a straightforward installation before a day on the water.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is a surface-mount rod and tackle rack, so placement should be planned around rod length, reel clearance, passenger movement, and access to nearby storage compartments. On pontoons, common locations include side panels, seat bases, console areas, or other flat mounting surfaces where rods can stay upright and away from foot traffic.\u003c\/p\u003e\u003cp\u003eBefore drilling, check that the mounting surface has enough backing strength and that rods will not interfere with gates, covers, bimini frames, or dock lines. The 24-1\/4 in. length is useful for confirming available space, while the 4 in. depth helps check clearance where passengers move around the boat.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis rack is a good match for pontoon owners who fish with multiple rod setups and want them staged, separated, and easy to grab. It is especially useful for casual fishing days, family outings, and dockside rigging when loose rods can quickly clutter seating areas or create snag points.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the rack and fasteners with fresh water after use in salt or brackish conditions, and wipe away bait residue, sunscreen, and grime before storage. Periodically check the mounting hardware for tightness, especially after trailering or running in chop, since vibration can loosen fittings over time.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023135109301,"sku":"QBP448279","price":89.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331743_qbp448279.jpg?v=1780191769"},{"product_id":"qbp549938","title":"TACO Marine 2-Rod Bungee Rod Holder, White, 9-1\/4 in, HDPE","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P03-132W is a white 2-rod bungee rod holder rack for under-gunnel rod storage, made to keep rods tucked away but still quick to reach on fishing boats and pontoons. It measures 9-1\/4 inches long, 3-3\/4 inches deep, and 1\/2 inch thick, giving it a low-profile fit along the inside of the gunwale or another flat storage area where rods need to stay clear of the deck.\u003c\/p\u003e\u003cp\u003eThe rack is made from U.V. stabilized high-density polyethylene, a practical material choice for cockpit and gunnel areas exposed to sunlight, spray, and regular washdowns. The integrated bungee cords hold rods in place while the boat is running, trailering, or moving through chop, helping reduce clutter and keeping tackle easier to manage during a fishing day.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds two fishing rods for simple under-gunnel storage without taking up deck space.\u003c\/li\u003e\n\u003cli\u003eBungee retention keeps rods seated in the rack while the boat is underway.\u003c\/li\u003e\n\u003cli\u003eU.V. stabilized high-density polyethylene helps the white rack stand up to sun exposure in marine use.\u003c\/li\u003e\n\u003cli\u003e9-1\/4 inch length, 3-3\/4 inch depth, and 1\/2 inch thickness suit compact mounting areas along the gunwale.\u003c\/li\u003e\n\u003cli\u003eWhite finish blends cleanly with many fiberglass interiors and cockpit layouts.\u003c\/li\u003e\n\u003cli\u003eSupplied with a mounting backing plate and hardware for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis rack is intended for mounting under the gunwale or in another protected, reachable storage location where rods can slide in and out without interfering with seating, hatches, wiring, or rod tips. Before drilling, check the back side of the mounting area for access, clearance, and enough surface strength to support the rack and the rods it will carry.\u003c\/p\u003e\u003cp\u003eThe included backing plate and hardware help spread the load at the mounting point. On cored fiberglass, aluminum, or pontoon panels, a dry-fit is useful before final fastening so the rack sits straight and the rods have a natural path in and out of the holders.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis 2-rod rack is a good match for anglers who want a tidy place for spare rods, trolling setups, or quick-change tackle without adding tall vertical holders to the deck. It works especially well in cockpit and under-gunnel spaces where rods need to stay protected from foot traffic but remain close at hand.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the rack and bungee area with fresh water after saltwater trips, especially when it has been exposed to spray, bait, or sunscreen residue. During regular boat checks, look over the mounting hardware and bungee tension so the rack continues to hold rods securely through vibration, trailering, and repeated use.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-rod bungee rod holder rack\u003c\/li\u003e\n\u003cli\u003eMounting backing plate\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023135142069,"sku":"QBP549938","price":83.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331744_qbp549938.jpg?v=1780191769"},{"product_id":"qbp885365","title":"TACO Marine 4-Rod Bungee Rod Holder, Pair, White UV-Stabilized HDPE","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P03-134W is a pair of white 4-rod bungee rod holders for under-gunnel storage on fishing boats, pontoons, and other boats where rods need to stay organized but easy to reach.\u003c\/p\u003e\u003cp\u003eEach holder is made from UV-stabilized high-density polyethylene and uses bungee cords to keep rods seated while the boat is underway or while gear is stored between trips. The set includes two mounts, with each mount measuring 15-5\/8 inches long, 3-3\/4 inches deep, and 1\/2 inch thick.\u003c\/p\u003e\u003cp\u003eThis rack is a practical fit for anglers who want to move rods off the deck, reduce clutter near the cockpit, and keep reels and rod blanks from sliding around under the gunnel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStores four rods across a pair of under-gunnel bungee holders.\u003c\/li\u003e\n\u003cli\u003eWhite UV-stabilized high-density polyethylene construction suits exposed boat storage areas.\u003c\/li\u003e\n\u003cli\u003eBungee cords help keep rods in place during normal movement on board.\u003c\/li\u003e\n\u003cli\u003e15-5\/8 inch length, 3-3\/4 inch depth, and 1\/2 inch thickness help confirm fit before drilling.\u003c\/li\u003e\n\u003cli\u003eMounting backing plates and hardware are included for installation.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe holder mounts to a flat area under the gunnel or another suitable onboard storage location. Check the available length and depth before drilling, and make sure the chosen surface gives enough clearance for rod tips, reels, and bungee access.\u003c\/p\u003e\u003cp\u003eThe small mounting bracket is positioned on the back of the rod holder, pilot holes are drilled, and the bracket is fastened to the holder with the supplied fasteners. The assembled holder can then be positioned at the mounting location and drilled in place as needed.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis rack works well for keeping trolling, casting, or spare rods off the cockpit sole during coastal fishing, dockside rigging, or days when multiple anglers are moving around the boat. It is also useful for boats with limited vertical storage where under-gunnel space is easier to reach.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo 4-rod bungee rod holder mounts\u003c\/li\u003e\n\u003cli\u003eMounting backing plates\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023135174837,"sku":"QBP885365","price":102.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331748_qbp885365.jpg?v=1780191770"},{"product_id":"qbp610339","title":"Edson Marine - Support Bracket - Rail Mount, 1\" Rail, 2-3\/8\" Mast","description":"\u003ch4\u003eSecure Your Radar Mast with Precision: Edson's Rail Support Bracket\u003c\/h4\u003e \u003cp\u003eExperience unparalleled stability at sea with Edson's Rail Support Bracket, designed exclusively for the discerning mariner. Crafted to bolster your 2-3\/8\" radar mast, this bracket ensures a steadfast connection to 1-inch railings, offering peace of mind through the most turbulent voyages. Its innovative design, coupled with high-grade stainless steel U-Bolts and robust Starboard Rail Mount Brackets, guarantees a secure, rattle-free mount. Ideal for affixing to bulkheads, cabin sides, or vertical transoms, it provides versatile support within a hand's reach of the railing, making it an indispensable ally for your nautical navigation.\u003c\/p\u003e \u003ch4\u003eEssential Features for Unwavering Support\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eUniversal Compatibility: Tailored for 2-3\/8\" Standard Radar Masts and 1-inch Railings.\u003c\/li\u003e \u003cli\u003eRust-Resistant Construction: Premium Stainless Steel U-Bolts for long-lasting durability.\u003c\/li\u003e \u003cli\u003eUnmatched Stability: Includes two Starboard Rail Mount Brackets for a steadfast installation.\u003c\/li\u003e \u003cli\u003eVersatile Mounting Options: Easily attaches to bulkheads, cabin sides, or vertical transoms.\u003c\/li\u003e \u003cli\u003eSimple, Secure Installation: Ensures a snug, rattle-free mount within 1\" of the railing.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eDurable Dimensions \u0026amp; Design\u003c\/h4\u003e \u003cp\u003eEngineered for efficiency, this bracket's compact design does not compromise on strength. It provides a crucial link between your radar mast and railing, ensuring your equipment remains stable and secure, no matter the sea conditions.\u003c\/p\u003e \u003ch4\u003eSeamless Integration\u003c\/h4\u003e \u003cp\u003eWith its sleek finish and professional-grade materials, the Rail Support Bracket seamlessly blends with your vessel's aesthetic. Its thoughtful design not only ensures functionality but also enhances the visual harmony of your maritime setup.\u003c\/p\u003e \u003ch4\u003eCustomize Your Maritime Experience\u003c\/h4\u003e \u003cp\u003eChoose the Edson Rail Support Bracket for a tailored fit to your unique seafaring requirements. Whether securing against a bulkhead, cabin side, or vertical transom, this bracket adapts to your vessel's specific needs, providing unparalleled support and reliability.\u003c\/p\u003e","brand":"Edson Marine","offers":[{"title":"Default Title","offer_id":52023244357813,"sku":"QBP610339","price":165.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1212662_qbp610339.jpg?v=1763252671"},{"product_id":"qbp597898","title":"Edson Marine - Clamp-On Accessory Mount - 3\", Stainless Steel","description":"\u003ch4\u003eRevolutionize Your Marine Experience with the Ultimate Clamp-On Accessory Mount\u003c\/h4\u003e \u003cp\u003eDiscover unparalleled versatility at sea with Edson's 3\" Stainless Clamp-On Accessory Mount. Engineered for the avid mariner, this robust mount offers a seamless solution to secure your essential gear, from drink holders to vital navigation instruments, directly to the pedestal guard. With its ability to adapt to angled guards and lock in place, you can ensure your accessories remain level and accessible, no matter the conditions. Crafted from highly polished 316 Stainless Steel, this mount is not only a testament to durability but also to the elegance it brings to your marine setup.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAdaptable to various guard sizes with included adapter sleeves for 1\", 1-1\/8\", and 1-1\/4\" pipes.\u003c\/li\u003e \u003cli\u003eRotates and locks in place for a custom fit, ensuring accessories are perfectly level.\u003c\/li\u003e \u003cli\u003eMade from 316 Stainless Steel for unmatched corrosion resistance and longevity.\u003c\/li\u003e \u003cli\u003eEasy installation on any pedestal guard, enhancing your boating convenience.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eDesigned for Durability: Technical Specifications Unveiled\u003c\/h4\u003e \u003cp\u003eConstructed with marine-grade 316 Stainless Steel, this accessory mount stands up to the harshest marine environments, promising years of reliable use. Its innovative locking mechanism ensures a secure fit, adaptable to guard pipes of varying diameters.\u003c\/p\u003e \u003ch4\u003eCompact Elegance: Sleek Dimensions for Seamless Integration\u003c\/h4\u003e \u003cp\u003eDesigned to blend effortlessly with your boat's aesthetic, the mount's compact size makes it an unobtrusive addition to your setup, ensuring functionality without sacrificing style.\u003c\/p\u003e \u003ch4\u003eSeamless Style: A Touch of Sophistication\u003c\/h4\u003e \u003cp\u003eThe highly polished finish of this stainless steel accessory mount not only resists the elements but also adds a touch of elegance to your marine equipment, reflecting the sunlight and the sea with its gleaming surface.\u003c\/p\u003e","brand":"Edson Marine","offers":[{"title":"Default Title","offer_id":52023292526773,"sku":"QBP597898","price":149.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1213431_qbp597898.jpg?v=1763253140"},{"product_id":"qbp598059","title":"Edson Marine - Clamp-On Accessory Mount - 7\", Stainless Steel","description":"\u003ch4\u003eExperience the Sea with Ease: The Ultimate Clamp-On Accessory Mount\u003c\/h4\u003e \u003cp\u003eImagine setting sail with all your essentials within arm's reach, enhancing your maritime adventure with unmatched convenience. Edson's 7\" Stainless Clamp-On Accessory Mount is your go-to solution for securing drink holders, navigation instruments, and other vital gear to the pedestal guard of your vessel. Designed with versatility and durability in mind, it promises to revolutionize the way sailors and marine enthusiasts accessorize their boats.\u003c\/p\u003e \u003ch4\u003eUnparalleled Versatility and Strength\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eAdaptable locking mechanism for angled guards, ensuring level placement of accessories regardless of orientation.\u003c\/li\u003e \u003cli\u003eSolid 316 Stainless Steel construction for enduring resistance against harsh marine environments.\u003c\/li\u003e \u003cli\u003eIncludes adapter sleeves for compatibility with 1\", 1-1\/8\", and 1-1\/4\" guard pipes, catering to a wide range of vessel types.\u003c\/li\u003e \u003cli\u003eHighly polished finish for a sleek, reflective look that complements any marine setting.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eSleek Dimensions for Seamless Integration\u003c\/h4\u003e \u003cp\u003eWith its compact 7\" design, this accessory mount is perfectly sized to offer functionality without overcrowding your space, making it an essential addition to any helm or guard rail.\u003c\/p\u003e \u003ch4\u003eA Fusion of Functionality and Elegance\u003c\/h4\u003e \u003cp\u003eThe accessory mount's highly polished finish not only provides a mirror-like sheen that withstands the elements but also adds a touch of elegance to your vessel's aesthetic. This blend of functionality and style ensures that your marine accessories are mounted securely and stylishly.\u003c\/p\u003e \u003ch4\u003eNavigate with Confidence: Your Marine Companion\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eTransform your pedestal guard into a versatile accessory hub.\u003c\/li\u003e \u003cli\u003eKeep essential tools and comforts within easy reach, enhancing your nautical journey.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eAdaptable Solutions for Every Sailor\u003c\/h4\u003e \u003cp\u003eWhether you're looking to maintain a level drink holder on a spirited voyage or angle your instruments for optimal visibility, Edson's accessory mount adapts to your needs. This innovative mount is designed to accommodate varying guard diameters with ease, ensuring a snug and secure fit for a broad spectrum of boats and yachts.\u003c\/p\u003e","brand":"Edson Marine","offers":[{"title":"Default Title","offer_id":52023292559541,"sku":"QBP598059","price":160.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1213432_qbp598059.jpg?v=1763253141"},{"product_id":"qbp598161","title":"Edson - Clamp Style Hardware Kit - Luncheon Table","description":"\u003ch4\u003eRevolutionize Your Marine Dining with Edson's Hardware Kit for Luncheon Tables\u003c\/h4\u003e \u003cp\u003eIntroducing Edson's premium Hardware Kit for Luncheon Tables - the ultimate solution for seafarers looking to customize their vessel's dining space. Perfect for the innovative handyman, this kit allows you to bring the comfort and elegance of a bespoke luncheon table to your boat. Crafted with precision and care, each component is designed to enhance your marine dining experience, making it an essential addition to any maritime adventure.\u003c\/p\u003e \u003ch4\u003eSeamless Integration and Unmatched Durability\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eComprehensive kit including all necessary stainless hardware and easy-to-follow instructions.\u003c\/li\u003e \u003cli\u003eClamps designed to fit a variety of guard pipe diameters: 1\", 1-1\/8\", and 1-1\/4\", ensuring a perfect fit for your setup.\u003c\/li\u003e \u003cli\u003eManufactured from premium-grade materials for enhanced durability and resistance to the harsh marine environment.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eCustomize Your Marine Space\u003c\/h4\u003e \u003cp\u003eEdson's Hardware Kit offers unparalleled flexibility, allowing you to tailor your luncheon table to fit your vessel's specific dimensions and style. With this kit, the power to personalize is in your hands, enabling you to create a functional, stylish dining area that reflects your unique taste and meets your boating needs.\u003c\/p\u003e \u003ch4\u003eElegance at Sea\u003c\/h4\u003e \u003cp\u003eDimensions \u0026amp; Specifications:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAdaptable clamps for 1\", 1-1\/8\", and 1-1\/4\" diameters, catering to a broad range of guard pipes.\u003c\/li\u003e \u003cli\u003eHigh-quality stainless steel hardware, promising longevity and aesthetic appeal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eBring Your Vision to Life\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eEach kit is designed to cater to different sizes and types of tables, providing you with the versatility to implement any vision you have for your marine dining area.\u003c\/li\u003e \u003cli\u003eWhether you're aiming for a simple, functional space or a luxurious dining setting, our hardware kit serves as the perfect foundation.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eEdson's Hardware Kit for Luncheon Tables is not just a set of tools and materials; it's an invitation to enhance your maritime lifestyle. By offering the flexibility to design and build a luncheon table that perfectly suits your needs, Edson empowers you to elevate your onboard dining experience. Sail away with confidence, knowing that your deck is equipped with the finest, most durable dining setup designed to make every meal at sea a memorable occasion.\u003c\/p\u003e","brand":"Edson Marine","offers":[{"title":"Default Title","offer_id":52023292592309,"sku":"QBP598161","price":303.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1213433_qbp598161.jpg?v=1763253141"},{"product_id":"qbp598371","title":"Edson Marine - Clamp Style Hardware Kit - Drop Leaf Table","description":"\u003ch4\u003eTransform Your Marine Space: Deluxe Hardware Kit for Drop Leaf Tables\u003c\/h4\u003e \u003cp\u003eEdson’s premium “Hardware Only” Kit offers the ultimate solution for the marine enthusiast looking to customize their vessel's cockpit. Ideal for the creative handyman, this kit empowers you to design and build your own drop leaf table, enhancing both functionality and aesthetic appeal aboard. With detailed instructions and high-quality stainless hardware included, crafting your maritime masterpiece has never been easier. Dive into a world where durability meets design, and elevate your marine experience with our dependable clamp style hardware kit.\u003c\/p\u003e \u003ch4\u003eSeamless Integration and Unmatched Durability\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eComplete kit with stainless steel table hinges, ensuring longevity and resistance to harsh marine environments.\u003c\/li\u003e \u003cli\u003eVersatile clamp design accommodates guard pipes of 1\", 1-1\/8\", and 1-1\/4\" diameters, providing a secure fit for various setups.\u003c\/li\u003e \u003cli\u003eComprehensive instructions included, guiding you through a hassle-free installation process.\u003c\/li\u003e \u003cli\u003eDesigned for the marine enthusiast, blending functionality with aesthetic appeal for your boat’s cockpit area.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eDesigned to Impress: Specifications at a Glance\u003c\/h4\u003e \u003cp\u003eThis hardware kit is meticulously engineered to ensure a perfect fit and lasting performance. Crafted from premium stainless steel, it stands up to the demanding conditions of marine environments, promising years of reliable use. The versatile clamp mechanism caters to a range of guard pipe diameters, making it a universal solution for your maritime projects.\u003c\/p\u003e \u003ch4\u003eA Size to Suit Every Design\u003c\/h4\u003e \u003cp\u003eWith the flexibility to accommodate guard pipes from 1\" to 1-1\/4\" in diameter, our hardware kit ensures a seamless fit for a wide variety of design preferences and requirements. This adaptability makes it a perfect choice for customizing your marine space, providing both practicality and elegance.\u003c\/p\u003e \u003ch4\u003eEndless Possibilities: Explore the Variations\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eStandard Kit: Ideal for straightforward installations, featuring clamps for the most common guard pipe diameters.\u003c\/li\u003e \u003cli\u003eExtended Kit: Includes additional hinges and clamps for larger projects, offering enhanced versatility.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWhether you're planning a simple addition or a comprehensive overhaul of your cockpit table, our Hardware Kit for Drop Leaf Table - Clamp Style is tailored to meet your needs. Embrace the opportunity to craft a space that's not only functional but also a reflection of your maritime passion.\u003c\/p\u003e","brand":"Edson Marine","offers":[{"title":"Default Title","offer_id":52023292657845,"sku":"QBP598371","price":563.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1213434_qbp598371.jpg?v=1763253142"},{"product_id":"qbp640313","title":"Lee's Tackle - Clamp-On Rod Holder Horizontal","description":"\u003ch4\u003eEffortless Installation, Elegant Design: Lee's Clamp-On Rod Holder\u003c\/h4\u003e \u003cp\u003eIntroducing the Lee's Clamp-On Rod Holder, an epitome of innovation and style for the modern mariner. Crafted from high-grade black aluminum, this rod holder offers both functionality and aesthetics for your vessel. Designed for horizontal mounting and fitting 1.050\"\" O.D. pipe, it provides a seamless integration with your boat's structure. The ease of installation is unmatched; requiring only an Allen Wrench, it eliminates the need for custom work, saving both time and money. Ideal for boats with internal wiring or hydraulic lines, these rod holders can be mounted on a variety of structures without compromising the integrity of your vessel. Each holder is lined with heavy-duty white vinyl, ensuring maximum protection and a snug fit for your rods, whether for storage or light tackle trolling.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHigh-grade black aluminum construction for durability and style.\u003c\/li\u003e \u003cli\u003eEasy installation with an Allen Wrench, no need for custom modifications.\u003c\/li\u003e \u003cli\u003ePerfect for boats with internal wiring or hydraulic lines.\u003c\/li\u003e \u003cli\u003eHeavy-duty white vinyl insert for rod protection.\u003c\/li\u003e \u003cli\u003eMarine Grade Stainless Bolts for secure and even clamping pressure.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eVersatile Mounting Options\u003c\/h4\u003e \u003cp\u003eLee's Clamp-On Rod Holder is not just a functional accessory but also an enhancement to your boat's appearance. The precision-made clamp ensures an exact fit around the pipe, welded to the tube for maximum strength. Its polished mirror finish adds a touch of elegance to your vessel, making it stand out in the marina.\u003c\/p\u003e \u003ch4\u003eChoose Your Perfect Match\u003c\/h4\u003e \u003cp\u003eUnderstanding the diverse needs of mariners, Lee's offers this Clamp-On Rod Holder in various variants to accommodate different pipe diameters:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eRA5201BK Black Aluminum \/ 1.050'' O.D. Pipe\u003c\/li\u003e \u003cli\u003eRA5201WH White Aluminum \/ 1.050'' O.D. Pipe\u003c\/li\u003e \u003cli\u003eRA5202BK Black Aluminum \/ 1.315'' O.D. Pipe\u003c\/li\u003e \u003cli\u003eRA5202WH White Aluminum \/ 1.315'' O.D. Pipe\u003c\/li\u003e \u003cli\u003eRA5203BK Black Aluminum \/ 1.660'' O.D. Pipe\u003c\/li\u003e \u003cli\u003eRA5203WH White Aluminum \/ 1.660'' O.D. Pipe\u003c\/li\u003e \u003cli\u003eRA5204WH White Aluminum \/ 1.900'' O.D. Pipe\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWhether for storage or light tackle trolling, Lee's Clamp-On Rod Holder is your go-to solution for adding functionality and flair to your marine setup, ensuring your fishing rods are always secure and accessible.\u003c\/p\u003e","brand":"Lee's Tackle","offers":[{"title":"White \/ 1.050'' O.D. Pipe","offer_id":52023310155957,"sku":"QBP640313-V3","price":160.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 1.315'' O.D. Pipe","offer_id":52023310188725,"sku":"QBP640313-V4","price":160.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 1.660'' O.D. Pipe","offer_id":52023310221493,"sku":"QBP640313-V9","price":160.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 1.900'' O.D. Pipe","offer_id":52023310254261,"sku":"QBP640313-V8","price":160.0,"currency_code":"USD","in_stock":false},{"title":"Black \/ 1.050'' O.D. Pipe","offer_id":52023310287029,"sku":"QBP640313-V6","price":160.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 1.315'' O.D. Pipe","offer_id":52023310319797,"sku":"QBP640313-V7","price":160.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 1.660'' O.D. Pipe","offer_id":52023310352565,"sku":"QBP640313-V0","price":160.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 1.900'' O.D. Pipe","offer_id":52023310385333,"sku":"QBP640313-V5","price":160.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1213704_qbp640313.jpg?v=1763253280"},{"product_id":"qbp640767","title":"Lee's Tackle - Reel Hanger - Bright Gold","description":"\u003ch4\u003ePremium Storage Solution: Lee's Rod\/Reel Hanger for Penn INTL 80VISW - Bright Gold\u003c\/h4\u003e \u003cp\u003eEnhance your vessel's aesthetics and functionality with Lee's Rod\/Reel Hanger, specifically designed for the Penn INTL 80VISW, in a luxurious bright gold finish. This elite storage solution, crafted from Marine Grade Anodized Aluminum, offers a sophisticated and secure method to stow your prized rods and reels. The system ensures simple, efficient storage, allowing the rod butt to rest in a closed-end set with a protective vinyl insert, while the rod's tip is securely locked in place by a nylon locking ring. This versatile hanger can be mounted horizontally, vertically, or overhead, adapting to any space or preference onboard. Available in an array of finishes, it not only supports the heaviest of rods but also adds a touch of elegance to your marine setup.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConstructed from Marine Grade Anodized Aluminum for durability and corrosion resistance.\u003c\/li\u003e \u003cli\u003eBright gold finish adds a touch of elegance to your boat's interior.\u003c\/li\u003e \u003cli\u003eVinyl insert protects the rod butt from wear and damage.\u003c\/li\u003e \u003cli\u003eNylon locking ring securely holds the rod tip, preventing accidental releases.\u003c\/li\u003e \u003cli\u003eFlexible mounting options: horizontal, vertical, or overhead for optimal space utilization.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Specifications\u003c\/h4\u003e \u003cp\u003eEngineered for the most popular big game reels, the hanger set's spring-loaded pins ensure a snug fit for the reel, preventing any swing or movement. The reel remains in an upright position, guaranteeing its safety and accessibility. This system, available exclusively in bright gold, is not only practical but also a statement piece for any angler's collection. Designed to accommodate a variety of reel sizes, including the 80VISW and 130VIS models, it offers unparalleled support and style for your fishing gear.\u003c\/p\u003e \u003ch4\u003eVariants for Ultimate Compatibility\u003c\/h4\u003e \u003cp\u003eLee's Rod\/Reel Hanger is tailored to fit the most prestigious reels, ensuring a perfect match for your equipment:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e80VISW - For Penn INTL 80VISW reels, in bright gold.\u003c\/li\u003e \u003cli\u003e130VIS - Expanding compatibility to include Penn INTL 130VIS reels, providing the same level of support and aesthetic appeal.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWith Lee's Rod\/Reel Hanger, you're not just storing your fishing gear; you're elevating the entire look and feel of your marine environment, ensuring your rods and reels are displayed in style and protected with the utmost care.\u003c\/p\u003e","brand":"Lee's Tackle","offers":[{"title":"80VISW","offer_id":52023310418101,"sku":"QBP640767-V2","price":89.5,"currency_code":"USD","in_stock":false},{"title":"130VIS","offer_id":52023310450869,"sku":"QBP640767-V0","price":89.5,"currency_code":"USD","in_stock":false},{"title":"50VISW","offer_id":52023310483637,"sku":"QBP640767-V8","price":89.5,"currency_code":"USD","in_stock":false},{"title":"30VISW","offer_id":52023310516405,"sku":"QBP640767-V9","price":89.5,"currency_code":"USD","in_stock":false},{"title":"70VIS","offer_id":52023310549173,"sku":"QBP640767-V7","price":89.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1213706_qbp640767.jpg?v=1763253280"},{"product_id":"qbp640985","title":"Lee's Tackle - Rod Holder - Stainless Steel","description":"\u003ch4\u003eSecure Your Catch with Lee's Stainless Steel Rod Holder\u003c\/h4\u003e \u003cp\u003eLee's Rod Holder Medium - 0° - Stainless Steel embodies over half a century of trusted quality and expertise in marine equipment. Selected by boat manufacturers and angling enthusiasts alike, this rod holder is part of an extensive range that includes over 46 flush-mounted models. Crafted for medium-sized rods with a 2 in O.D., this 0° angle holder is designed for vertical fishing positions, perfect for trolling or stationary fishing. Made from high-grade stainless steel, each rod holder is polished by hand before undergoing an electropolishing process, ensuring lasting shine and corrosion resistance. Whether you're outfitting a new vessel or upgrading your current setup, Lee’s rod holders offer unparalleled durability and performance.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHand-polished, electropolished stainless steel for exceptional durability and aesthetics.\u003c\/li\u003e \u003cli\u003eMedium size (2 in O.D.) accommodates a wide range of fishing rods.\u003c\/li\u003e \u003cli\u003e0° angle ideal for vertical fishing applications.\u003c\/li\u003e \u003cli\u003ePart of an extensive selection offering over 46 different flush-mounted models.\u003c\/li\u003e \u003cli\u003eSuitable for both new installations and upgrades on any fishing vessel.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Excellence for Angling Precision\u003c\/h4\u003e \u003cp\u003eLee's commitment to quality is evident in the meticulous design and construction of their rod holders. The 0° angle is specifically engineered to support vertical fishing techniques, providing a secure hold and quick access to your rod. Whether you're battling a deep-sea behemoth or trolling for lake trout, this rod holder ensures your gear is always ready and reliable.\u003c\/p\u003e \u003ch4\u003eVariants for Every Fishing Need\u003c\/h4\u003e \u003cp\u003eUnderstanding the diverse needs of anglers, Lee's offers this rod holder in various models to suit different fishing styles and boat setups:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eMedium:\u003c\/strong\u003e For standard fishing rods, offering a perfect balance of strength and accessibility.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHeavy Duty:\u003c\/strong\u003e For larger, heavier rods with a 2 1\/4 in. O.D., providing extra support for big game fishing.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eEach variant is available in three different angles (0, 15, \u0026amp; 30 degrees), allowing you to customize your setup for optimal fishing performance and comfort.\u003c\/p\u003e \u003cp\u003eWith Lee's Rod Holder Medium - 0° - Stainless Steel, secure your rod in style and focus on what you do best: catching the big one. Lee's has been setting the standard for high-quality marine equipment for over 50 years, ensuring that every angler's experience is nothing short of exceptional.\u003c\/p\u003e","brand":"Lee's Tackle","offers":[{"title":"Medium","offer_id":52023310581941,"sku":"QBP640985-V8","price":139.5,"currency_code":"USD","in_stock":true},{"title":"Heavy Duty","offer_id":52023310614709,"sku":"QBP640985-V0","price":171.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1213707_qbp640985.jpg?v=1763253281"},{"product_id":"qbp641120","title":"Lee's Tackle - Clamp-On Rod Holder Vertical Mount","description":"\u003ch4\u003eElevate Your Fishing Experience: Lee's White Aluminum Clamp-On Rod Holder\u003c\/h4\u003e \u003cp\u003eIntroducing the Lee's Clamp-On Rod Holder, a masterpiece in marine engineering, now available in pristine white aluminum for a vertical mount on 2.375\"\" O.D. pipes. This innovative rod holder merges exceptional functionality with striking aesthetics, offering a hassle-free solution for anglers and boaters. Designed for effortless installation with just an Allen Wrench, it eliminates the need for custom work, allowing for quick adjustments or relocations. Ideal for a myriad of structures including Towers, Hard Tops, T-Tops, Radar Arches, Rails, and Poling Platforms, it offers a versatile solution for securing your rods, whether for storage or light tackle trolling. Equipped with a heavy-duty white vinyl insert and precision-made for an exact fit, each holder ensures your rods are protected and securely fastened, courtesy of four Marine Grade Stainless Bolts for an even clamping pressure and a secure bond.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eStriking white aluminum finish, offering a clean and polished look for any vessel.\u003c\/li\u003e \u003cli\u003eSimplified installation process, requiring no special tools beyond an Allen Wrench.\u003c\/li\u003e \u003cli\u003eHeavy-duty white vinyl lining to protect rod finishes.\u003c\/li\u003e \u003cli\u003eFlexible mounting on any standard size aluminum pipe structure.\u003c\/li\u003e \u003cli\u003eDurable construction with Marine Grade Stainless Bolts for a secure fit.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Specifications\u003c\/h4\u003e \u003cp\u003eLee's Rod Holder is meticulously designed for both functionality and visual appeal. Its construction from high-quality aluminum ensures longevity and resistance to the harsh marine environment, while the white finish adds a touch of elegance. The rod holder is engineered to fit 2.375\"\" O.D. pipes, making it suitable for a wide range of marine applications.\u003c\/p\u003e \u003ch4\u003eVersatile Variant Options\u003c\/h4\u003e \u003cp\u003eUnderstanding the perse needs of the marine community, Lee's offers this rod holder in a variety of finishes and sizes to ensure a perfect match for your boat and fishing requirements:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eRA5001SL Silver Aluminum \/ 1.050'' O.D. Pipe\u003c\/li\u003e \u003cli\u003eRA5001GL Gold Aluminum \/ 1.050'' O.D. Pipe\u003c\/li\u003e \u003cli\u003eRA5002SL Silver Aluminum \/ 1.315'' O.D. Pipe and more, up to\u003c\/li\u003e \u003cli\u003eRA5005WH White Aluminum \/ 2.375'' O.D. Pipe\u003c\/li\u003e \u003cli\u003eRA5005BK Black Aluminum \/ 2.375'' O.D. Pipe\u003c\/li\u003e \u003cli\u003eOptions also include black and white aluminum variants for different pipe diameters.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eLee's Clamp-On Rod Holder not only enhances your boat's functionality but also its aesthetic appeal, ensuring your fishing gear is always ready and accessible, no matter where your adventures take you. With Lee's, prepare to elevate your fishing experience to new heights.\u003c\/p\u003e","brand":"Lee's Tackle","offers":[{"title":"Silver Aluminum \/ 1.050'' O.D. Pipe","offer_id":52023311302837,"sku":"QBP641120-V2","price":205.0,"currency_code":"USD","in_stock":false},{"title":"Gold Aluminum \/ 1.050'' O.D. Pipe","offer_id":52023311335605,"sku":"QBP641120-V4","price":215.0,"currency_code":"USD","in_stock":true},{"title":"Silver Aluminum \/ 1.315'' O.D. Pipe","offer_id":52023311368373,"sku":"QBP641120-V9","price":205.0,"currency_code":"USD","in_stock":false},{"title":"Gold Aluminum \/ 1.315'' O.D. Pipe","offer_id":52023311401141,"sku":"QBP641120-V6","price":230.0,"currency_code":"USD","in_stock":false},{"title":"Silver Aluminum \/ 1.660'' O.D. Pipe","offer_id":52023311433909,"sku":"QBP641120-V8","price":205.0,"currency_code":"USD","in_stock":false},{"title":"Gold Aluminum \/ 1.660'' O.D. Pipe","offer_id":52023311466677,"sku":"QBP641120-V1","price":230.0,"currency_code":"USD","in_stock":false},{"title":"Silver Aluminum \/ 1.900'' O.D. Pipe","offer_id":52023311499445,"sku":"QBP641120-V5","price":205.0,"currency_code":"USD","in_stock":true},{"title":"Gold Aluminum \/ 1.900'' O.D. Pipe","offer_id":52023311532213,"sku":"QBP641120-V7","price":230.0,"currency_code":"USD","in_stock":true},{"title":"Silver Aluminum \/ 2.375'' O.D. Pipe","offer_id":52023311564981,"sku":"QBP641120-V3","price":205.0,"currency_code":"USD","in_stock":false},{"title":"Gold Aluminum \/ 2.375'' O.D. Pipe","offer_id":52023311597749,"sku":"QBP641120-V0","price":230.0,"currency_code":"USD","in_stock":false},{"title":"Black Aluminum \/ 1.050'' O.D. Pipe","offer_id":52023311630517,"sku":"QBP641120-V64","price":160.0,"currency_code":"USD","in_stock":true},{"title":"Black Aluminum \/ 1.315'' O.D. Pipe","offer_id":52023311663285,"sku":"QBP641120-V00","price":160.0,"currency_code":"USD","in_stock":false},{"title":"Black Aluminum \/ 1.660'' O.D. Pipe","offer_id":52023311696053,"sku":"QBP641120-V08","price":160.0,"currency_code":"USD","in_stock":false},{"title":"Black Aluminum \/ 1.900'' O.D. Pipe","offer_id":52023311728821,"sku":"QBP641120-V80","price":160.0,"currency_code":"USD","in_stock":true},{"title":"Black Aluminum \/ 2.375'' O.D. Pipe","offer_id":52023311761589,"sku":"QBP641120-V37","price":160.0,"currency_code":"USD","in_stock":true},{"title":"White Aluminum \/ 1.050'' O.D. Pipe","offer_id":52023311794357,"sku":"QBP641120-V46","price":160.0,"currency_code":"USD","in_stock":false},{"title":"White Aluminum \/ 1.315'' O.D. Pipe","offer_id":52023311827125,"sku":"QBP641120-V73","price":160.0,"currency_code":"USD","in_stock":false},{"title":"White Aluminum \/ 1.660'' O.D. Pipe","offer_id":52023311859893,"sku":"QBP641120-V63","price":160.0,"currency_code":"USD","in_stock":false},{"title":"White Aluminum \/ 1.900'' O.D. Pipe","offer_id":52023311892661,"sku":"QBP641120-V72","price":160.0,"currency_code":"USD","in_stock":false},{"title":"White Aluminum \/ 2.375'' O.D. Pipe","offer_id":52023311925429,"sku":"QBP641120-V02","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1213708_qbp641120.jpg?v=1763253283"},{"product_id":"qbp641305","title":"Lee's Tackle - Flush Swivel Rod Holder","description":"\u003ch4\u003eRevolutionary Fishing Support: Lee's 30 Degree SS Flush Mount Swivel Base Rod Holder\u003c\/h4\u003e \u003cp\u003eLee's presents the \"Ultimate Rod Holder\" - a 30 Degree SS Flush Mount Swivel Base Rod Holder, engineered for the serious angler. This medium-sized, stainless steel marvel is designed to elevate your fishing experience. Primarily aimed at bent butt tackle, its unique swivel base allows for the rod butt to rotate within the holder under side pressure, a critical feature for battling the likes of Giant Blue Fin Tuna. This functionality not only prevents sheared rod holder pins but significantly enhances your chance of landing the big one by allowing the rod to follow the fish, minimizing line fraying and drag. The swivel base also makes for easy removal of the rod, accommodating straight butt rods as well by manual rotation to keep the line on the roller's tip. Adjust the torque with ease using the pressure on nylon drag washers, secured by a stainless steel lock nut.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUnique swivel base design for dynamic rod movement.\u003c\/li\u003e \u003cli\u003eConstructed from durable stainless steel for longevity.\u003c\/li\u003e \u003cli\u003eAdjustable torque setting via nylon drag washers and stainless steel lock nut.\u003c\/li\u003e \u003cli\u003eEliminates the risk of sheared rod holder pins under high tension.\u003c\/li\u003e \u003cli\u003eVersatile use with both bent and straight butt rods.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Mastery for the Avid Angler\u003c\/h4\u003e \u003cp\u003eDimensions: 2\"\" x 9\"\", perfectly sized for medium setups. The swivel base rod holder's 30 Degree angle is optimized for a broad range of fishing techniques, ensuring that regardless of your target or tackle, you have the support needed for a successful day on the water.\u003c\/p\u003e \u003ch4\u003eVariants to Suit Every Fishing Style\u003c\/h4\u003e \u003cp\u003eLee's recognizes the diversity in angling preferences and offers this innovative rod holder in several angles to match your specific fishing needs:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e30 Degree for optimal line management and deep-sea challenges.\u003c\/li\u003e \u003cli\u003e0 Degree for vertical fishing techniques and high-tension scenarios.\u003c\/li\u003e \u003cli\u003e15 Degree for a balanced approach, suitable for a variety of species.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWith Lee's 30 Degree SS Flush Mount Swivel Base Rod Holder, transform your fishing technique into an art form, ensuring that you're always prepared for the battle beneath the waves.\u003c\/p\u003e","brand":"Lee's Tackle","offers":[{"title":"30 Degree","offer_id":52023311958197,"sku":"QBP641305-V1","price":181.5,"currency_code":"USD","in_stock":true},{"title":"0 Degree","offer_id":52023311990965,"sku":"QBP641305-V0","price":181.5,"currency_code":"USD","in_stock":true},{"title":"15 Degree","offer_id":52023312023733,"sku":"QBP641305-V2","price":181.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1213712_qbp641305.jpg?v=1763253283"},{"product_id":"qbp641360","title":"Lee's Tackle - MC0075 Rod and Reel Hanger Set - Bright Gold","description":"\u003ch4\u003ePrecision Craftsmanship for the Avid Angler: Lee's Rod and Reel Hanger Set for Penn 50VSX - Bright Gold\u003c\/h4\u003e \u003cp\u003eTransform your marine gear storage with the Lee's Rod and Reel Hanger Set, elegantly designed for the Penn 50VSX in a radiant bright gold finish. Meticulously constructed from Marine Grade Anodized Aluminum, this hanger set exemplifies durability and style, offering a secure and visually appealing solution for mounting your valued fishing equipment. Designed to hold your reel in an upright position through spring-loaded pins that snap into harness lugs, this system prevents the reel from swinging, ensuring stability and protection. The rod's tip is securely locked into place with a nylon ring, providing peace of mind whether mounted horizontally, vertically, or overhead. Perfect for the serious fisherman who values both functionality and aesthetic appeal in their gear storage solutions.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMarine Grade Anodized Aluminum construction in bright gold for unparalleled durability and style.\u003c\/li\u003e \u003cli\u003eSpring-loaded pins for secure attachment of reel, preventing movement and swing.\u003c\/li\u003e \u003cli\u003eNylon ring locks the rod's tip into place, ensuring stability and security.\u003c\/li\u003e \u003cli\u003eVersatile mounting options including horizontal, vertical, or overhead installations.\u003c\/li\u003e \u003cli\u003eDesigned specifically for Penn 50VSX reels, with variants available for 16VSX and 30VSX models.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Specifications\u003c\/h4\u003e \u003cp\u003eThe Lee's Rod and Reel Hanger Set is crafted with precision to accommodate the specific dimensions and requirements of the Penn 50VSX, ensuring a perfect fit and optimal support. The bright gold anodized finish not only protects against the harsh marine environment but also adds a touch of elegance to your boat's interior.\u003c\/p\u003e \u003ch4\u003eVariants Tailored to Your Fishing Arsenal\u003c\/h4\u003e \u003cp\u003eLee's understands the diverse needs of anglers and offers this hanger set in various models to suit a range of Penn reels:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16VSX - For lighter setups, maintaining the same quality and finish.\u003c\/li\u003e \u003cli\u003e30VSX - Bridging the gap for medium-heavy tackle requirements.\u003c\/li\u003e \u003cli\u003e50VSX - The original model, providing robust support for heavy-duty fishing adventures.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWith the Lee's Rod and Reel Hanger Set, secure and display your fishing gear with confidence and class, knowing that every detail has been accounted for in this premium storage solution.\u003c\/p\u003e","brand":"Lee's Tackle","offers":[{"title":"16VSX","offer_id":52023312056501,"sku":"QBP641360-V6","price":89.5,"currency_code":"USD","in_stock":false},{"title":"30VSX","offer_id":52023312089269,"sku":"QBP641360-V9","price":89.5,"currency_code":"USD","in_stock":false},{"title":"50VSX","offer_id":52023312122037,"sku":"QBP641360-V0","price":89.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1213715_qbp641360.jpg?v=1763253284"},{"product_id":"qbp642284","title":"Lee's Tackle - Avet Rod and Reel Hanger Set","description":"\u003ch4\u003eEnhance Your Gear Storage with Lee's Rod and Reel Hanger Set for Avet 50W - Bright Gold\u003c\/h4\u003e \u003cp\u003eIntroducing the Lee's Rod and Reel Hanger Set, meticulously designed for the Avet 50W, now available in a stunning bright gold finish. This elegant storage solution is crafted from Marine Grade Anodized Aluminum, offering both exceptional durability and a sleek aesthetic to complement your marine setup. Engineered to optimize your space while securing your prized fishing gear, the set features spring-loaded pins that effortlessly snap into the harness lugs of your Avet 50W reel, holding it firmly in an upright position. The rod's tip is then securely locked into place with a nylon ring, ensuring a stable and protective environment for your equipment. Suitable for horizontal, vertical, or overhead mounting, this hanger set is as versatile as it is functional, making it an indispensable addition to any angler's boat.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConstructed with Marine Grade Anodized Aluminum for long-lasting use and appeal.\u003c\/li\u003e \u003cli\u003eBright gold finish adds a touch of sophistication to your fishing setup.\u003c\/li\u003e \u003cli\u003eSpring-loaded pins ensure a secure fit for your Avet 50W reel, preventing any unwanted movement.\u003c\/li\u003e \u003cli\u003eFlexible mounting options allow for efficient use of space on your boat.\u003c\/li\u003e \u003cli\u003eThe nylon locking ring provides additional security for the rod's tip, keeping your gear safe and ready.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eSpecifications Tailored for the Avid Angler\u003c\/h4\u003e \u003cp\u003eLee's Rod and Reel Hanger Set is not just about aesthetics; it's a robust system designed to support the specific needs of deep-sea anglers. The bright gold anodized finish not only resists corrosion but also enhances the visual appeal of your marine equipment. With dimensions tailored for the Avet 50W, it ensures a perfect fit and seamless integration into your fishing arsenal.\u003c\/p\u003e \u003ch4\u003eVariants to Fit Your Fishing Style\u003c\/h4\u003e \u003cp\u003eUnderstanding the diverse requirements of anglers, Lee's offers this hanger set in variants suited to different models of Avet reels:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAvet 50W - The original model, providing a flawless fit for this specific reel size.\u003c\/li\u003e \u003cli\u003eAvet 30W - A slightly smaller variant, ensuring that anglers with different reel sizes can also enjoy the benefits of secure and stylish gear storage.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWith the Lee's Rod and Reel Hanger Set for Avet 50W in Bright Gold, elevate the organization and accessibility of your fishing equipment, ensuring that your gear not only remains secure but also displays your angling prowess with unmatched elegance.\u003c\/p\u003e","brand":"Lee's Tackle","offers":[{"title":"Avet 50W","offer_id":52023312253109,"sku":"QBP642284-V2","price":89.5,"currency_code":"USD","in_stock":true},{"title":"Avet 30W","offer_id":52023312285877,"sku":"QBP642284-V3","price":89.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1213719_qbp642284.jpg?v=1763253286"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/collections\/1119198_fishing-rod-holders.jpg?v=1763133966","url":"https:\/\/www.qualityboatparts.com\/collections\/fishing-rod-holders.oembed?page=7","provider":"Quality Boat Parts","version":"1.0","type":"link"}