{"title":"Distribution Panel Labels","description":"","products":[{"product_id":"qbp711839","title":"Blue Sea Systems AC Panel Extended 120 Label Set, Weatherproof, For Contura Waterproof Fuse Panels and ST Glass Fuse Blocks","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8067 is an extended 120-label set for AC distribution panels and related panel hardware on board. It includes 120 AC labels, and the labels are the large Blue Sea format at about 1.438 x 0.438 inches, which gives clear, readable circuit marking across a busy panel.\u003c\/p\u003e\u003cp\u003eThis set is meant for AC circuits rather than 12V or 24V DC labeling, so it fits the part of the boat handling shore power, inverter-fed AC loads, outlets, lighting, appliances, and similar branch circuits. It is used on Contura Waterproof Fuse Panels, ST Glass Fuse Blocks, and all raised rocker and toggle circuit breaker panels, which makes it a practical match when you are updating an existing Blue Sea panel or finishing a new AC layout.\u003c\/p\u003e\u003cp\u003eClear panel labels matter most when you are tracing faults, isolating a load at the dock, or handing the boat over to crew or a service technician. A larger set like this also helps on boats with more than a few AC circuits, where a basic label kit usually runs out of useful legends.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e120 AC labels for a wide range of onboard branch circuits and panel functions\u003c\/li\u003e\n\u003cli\u003eReinforced, weatherproof label material for panel areas that see moisture and regular wipe-downs\u003c\/li\u003e\n\u003cli\u003eLarge-format labels sized about 1.438 x 0.438 inches for clear circuit identification\u003c\/li\u003e\n\u003cli\u003eFits Contura Waterproof Fuse Panels\u003c\/li\u003e\n\u003cli\u003eFits ST Glass Fuse Blocks\u003c\/li\u003e\n\u003cli\u003eFits all raised rocker and toggle circuit breaker panels\u003c\/li\u003e\n\u003cli\u003eCovers common AC panel labels for shore power, outlets, lighting, galley loads, charger or inverter circuits, and other cabin systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis label set makes the most sense when your boat already uses Blue Sea large-format panel labels and you need AC-specific legends beyond a smaller starter kit. The included label names cover many of the circuits found on cruising boats, sportfish boats, trawlers, and larger sailboats with shore power service, multiple cabin zones, galley appliances, and inverter or charger equipment.\u003c\/p\u003e\u003cp\u003eBecause it is built around AC circuit naming, it helps keep the panel easy to read when the boat has separate AC and DC sections. That is especially useful on mixed systems where fast identification matters during troubleshooting, load management, or routine breaker switching.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eApplication is straightforward as long as the receiving panel or block uses the Blue Sea large-label format. Clean the mounting surface first, line up each label with the breaker or switch it belongs to, and keep the wording consistent across the full panel so the AC side reads clearly at a glance. This is a good fit for refits, panel cleanups, or final labeling after adding new AC loads on board.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023027269813,"sku":"QBP711839","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329867_qbp711839.jpg?v=1780191630"},{"product_id":"qbp440521","title":"Blue Sea Systems Small Format DC Label Kit, For Contura Waterproof Panels, ST Blade Fuse Blocks, 60 Labels","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Small Format Label Kit is a 60-label set for marking common DC circuits on boat electrical panels and fuse blocks. Each label measures 0.625 in wide by 0.375 in high, so it fits the tight label spaces found on compact marine DC distribution gear without crowding the panel face.\u003c\/p\u003e\u003cp\u003eThese labels are made from material that is reinforced and weatherproof, which makes them a practical match for helm stations, cockpit panels, cabin distribution panels, and other locations where labels may see moisture, handling, and regular cleaning. They help keep circuit identification clear when troubleshooting, switching loads, or checking fuse locations on board.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIncludes 60 common DC circuit labels for organizing marine electrical loads.\u003c\/li\u003e\n\u003cli\u003eSmall label size of 0.625 in by 0.375 in fits compact panel and fuse block label areas.\u003c\/li\u003e\n\u003cli\u003eMaterial is reinforced and weatherproof for use around marine DC distribution panels.\u003c\/li\u003e\n\u003cli\u003eWorks with Contura Waterproof Circuit Breaker Panels and Contura Waterproof Fuse Panels.\u003c\/li\u003e\n\u003cli\u003eAlso fits ST Blade Fuse Blocks, including common 6-circuit and 12-circuit configurations.\u003c\/li\u003e\n\u003cli\u003eAvailable in black or gray so the label set can match the look of the panel or fuse block installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis label kit is offered in two color configurations. Both variants cover the same small-format label use case for DC circuit identification, with the color being the visible difference between the two options.\u003c\/p\u003e\u003cp\u003eThe shared 60-label format, small label dimensions, reinforced weatherproof material, and listed Blue Sea Systems panel and fuse block applications remain consistent across the black and gray versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8214: Black. This version suits panels and fuse block covers where a black label background matches the surrounding hardware or creates a darker finished look.\u003c\/li\u003e\n\u003cli\u003e8217: Gray. This version suits installations where gray labeling better matches the panel face, cover, or existing Blue Sea Systems components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe label size is intended for Blue Sea Systems Contura Waterproof Circuit Breaker Panels, Contura Waterproof Fuse Panels, and ST Blade Fuse Blocks. For a clean fit, confirm that the panel or fuse block has the small-format label area used by these Blue Sea Systems components.\u003c\/p\u003e\u003cp\u003eBecause these are identification labels rather than electrical components, there are no voltage, amperage, or network compatibility requirements to match. The key fit points are the physical label area, the label color, and the DC circuit names needed for the vessel.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis kit is a good match for new DC panel builds, refits, fuse block cleanup, and replacement of worn or unreadable labels. It is especially useful on boats with multiple house loads, electronics circuits, lighting circuits, pumps, and accessory circuits that need to be identified quickly at the panel.\u003c\/p\u003e\u003cp\u003eClear labeling makes day-to-day operation easier and helps during troubleshooting, especially when several people may operate or maintain the same boat. It also gives a cleaner finish to panel work after adding new circuits or reorganizing an existing DC system.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003e60 small-format common DC labels\u003c\/li\u003e\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Black","offer_id":52023101849781,"sku":"QBP440521-V5","price":13.99,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":52023101882549,"sku":"QBP440521-V2","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333265_qbp440521.jpg?v=1780191720"},{"product_id":"qbp137065","title":"Blue Sea Systems Emergency Vehicle Label Set, For ST Blade Fuse Blocks, 180 DC Labels, Black Labels, Weatherproof","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 7870 is a black 180-label set for DC circuit identification on emergency-vehicle style electrical systems that use compatible ST Blade fuse blocks. Each label measures 0.625 x 0.375 in. (15.88 x 9.53 mm), and the label stock is reinforced and weatherproof for service areas where panels and fuse blocks see regular handling.\u003c\/p\u003e\u003cp\u003eThis set is a practical fit when you want readable circuit names right at the fuse block instead of relying on handwritten markings. For marine installations, the main checks are straightforward: the fuse block needs to be one of the compatible ST Blade models, and the printed label names need to match the way the onboard accessory circuits are actually laid out.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e180 DC labels in one set for auxiliary distribution layouts with many branch circuits\u003c\/li\u003e\n\u003cli\u003eSmall-format label size of 0.625 x 0.375 in. (15.88 x 9.53 mm)\u003c\/li\u003e\n\u003cli\u003eReinforced, weatherproof material for fuse blocks mounted in damp or exposed service areas\u003c\/li\u003e\n\u003cli\u003eMade for Blue Sea Systems ST Blade fuse blocks\u003c\/li\u003e\n\u003cli\u003eFits compatible ST Blade models including 5023, 5025, 5026, 5028, 5029, 5032, 5035, 5045, and 5046\u003c\/li\u003e\n\u003cli\u003eKeeps circuit identification at the fuse block clear during troubleshooting, fuse replacement, and later service work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis label set matches Blue Sea small-format label recesses used on compatible ST Blade fuse block covers and related layouts in the same family. It is not a universal panel label sheet, so physical fit is tied to the fuse block style rather than just the label wording.\u003c\/p\u003e\u003cp\u003eThe other fit point is the circuit naming itself. Because this set is arranged for emergency-vehicle use, it makes the most sense where the vessel or special-purpose craft uses the same terminology for its DC accessory circuits.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eInstallation is simple on the correct fuse block because the label size matches the recess format used by compatible ST Blade units. Once applied, the labels give each fused branch circuit a fixed reference point on the block cover, which is useful when several added loads are grouped in one distribution area.\u003c\/p\u003e\u003cp\u003eThis is a good match for patrol boats, support craft, and refit projects that borrow emergency-response circuit naming. For a standard cruising or fishing boat, it is worth checking the printed legends against the actual onboard load list before ordering.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023118823605,"sku":"QBP137065","price":77.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329774_qbp137065.jpg?v=1780191733"},{"product_id":"qbp799256","title":"Blue Sea Systems Battery Switch Icon Label Kit, 18 Icon Labels","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 7902 is an icon circuit identification label kit for battery switches. It includes 18 labels and fits Blue Sea Systems m-Series, e-Series, and HD-Series battery switches, so it is a direct match for many common battery bank layouts on board.\u003c\/p\u003e\u003cp\u003eClear labeling at the switch helps when you are isolating a bank, combining batteries, tracing a fault, or handing the boat over to crew or a service yard. This kit covers common functions such as Battery 1, Battery 2, Battery 3, Bow Thruster, Chassis, Engine, Generator, House, Inverter, Ground, Windlass, Parallel, and a blank option for custom marking.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e18 icon labels for battery switch circuit identification\u003c\/li\u003e\n\u003cli\u003eFits Blue Sea Systems m-Series, e-Series, and HD-Series battery switches\u003c\/li\u003e\n\u003cli\u003eCovers common battery bank and load labels used on boats with start, house, thruster, inverter, generator, and windlass circuits\u003c\/li\u003e\n\u003cli\u003eMakes battery switch positions easier to understand during normal operation, rewiring, and troubleshooting\u003c\/li\u003e\n\u003cli\u003eIncludes a blank label for setups that need custom circuit naming\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is meant for Blue Sea Systems battery switches in the m-Series, e-Series, and HD-Series families. It is not a general distribution panel label set, so it is best matched to installations where the battery switch itself needs clear circuit identification rather than the panel around it.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eIt is a good fit for boats with more than one battery bank or any setup where different users may need to understand the switching layout quickly. On cruising boats, fishing boats, and service vessels, that can make daily operation simpler and reduce mistakes when switching between engine, house, thruster, or emergency parallel functions.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003e18 icon labels for battery switches\u003c\/li\u003e\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023118921909,"sku":"QBP799256","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330000_qbp799256.jpg?v=1780191734"},{"product_id":"qbp734281","title":"Blue Sea Systems Basic DC Panel Label Set, For Contura Waterproof Fuse Panels, For ST Glass Fuse Blocks, For Raised Rocker and Toggle Circuit Breaker Panels, 30 Labels","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8030 is a basic 30-label set for DC electrical panels, fuse blocks, and breaker panels where clear circuit identification matters. Each label measures 1.438 x 0.438 in. (36.51 x 11.11 mm), which matches Blue Sea large-format label positions used on ST Glass fuse blocks and several DC panel layouts.\u003c\/p\u003e\u003cp\u003eThis set covers common onboard circuits such as bilge pump, blower, GPS, VHF, radar, refrigerator, running lights, stereo, and water pressure, along with a spare label for an open position. The reinforced weatherproof material is a practical step up from handwritten tags when a panel lives in a damp cabin, a cockpit console, or any other area that sees regular service work.\u003c\/p\u003e\u003cp\u003eIt suits boats that need a cleaner DC panel layout without changing the electrical hardware itself. For refits, seasonal maintenance, or finishing a fresh panel install, it helps crew and technicians identify circuits quickly when switching loads on and off or tracing a fault underway.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e30 large-format DC labels for common marine circuits in one set\u003c\/li\u003e\n\u003cli\u003eIndividual label size of 1.438 x 0.438 in. (36.51 x 11.11 mm)\u003c\/li\u003e\n\u003cli\u003eUsed on Blue Sea Contura Waterproof Fuse Panels, ST Glass fuse blocks, and raised rocker or toggle circuit breaker panels that accept this label format\u003c\/li\u003e\n\u003cli\u003eReinforced weatherproof label stock for panel areas that see moisture and regular handling\u003c\/li\u003e\n\u003cli\u003eIncludes common legends such as bilge pump, GPS, VHF, radar, refrigerator, running lights, stereo, and water pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis label set is meant for Blue Sea large-label positions, not every generic label recess on the market. It is commonly used with ST Glass fuse blocks and with panel families such as the Contura Waterproof Fuse Panels, including layouts like the 8053 and 8054. It also fits raised rocker and toggle breaker panels that use the same large-format label size.\u003c\/p\u003e\u003cp\u003eBefore ordering for an older panel or a mixed-brand electrical system, check the label window size and compare it with the 1.438 x 0.438 in. format. That matters most when you are replacing older labels rather than installing on a panel that originally used this series.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eThis set works best once the panel layout and circuit assignments are finalized, so each label matches the actual load on board. That is especially useful on cruising sailboats, center consoles, and small powerboats where navigation lights, pumps, electronics, and cabin loads share the same DC distribution area.\u003c\/p\u003e\u003cp\u003eClear labeling makes day-to-day operation easier and cuts down on confusion during troubleshooting, winterizing, or handing the boat over to a new owner or technician. On a working panel, that kind of clarity is often what separates a quick fix from a long search behind the helm.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023119020213,"sku":"QBP734281","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329862_qbp734281.jpg?v=1780191734"},{"product_id":"qbp901621","title":"Blue Sea Systems Basic AC Panel Label Set, 30 Labels","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8031 is a 30-label AC panel set for marking common onboard AC circuits with clear, consistent legends. Each label measures 1.438 x 0.438 in., and the set covers common circuit names such as air conditioner, battery charger, inverter, outlets, refrigerator, microwave, water heater, TV\/stereo, and spare, along with one blank label for a custom circuit.\u003c\/p\u003e\u003cp\u003eThe label stock is reinforced and weatherproof, which makes it a better long-term replacement for handwritten tags or worn factory legends around the helm, cabin, or electrical panel. On a boat, that matters when you are tracing a fault, isolating one branch circuit, or cleaning up an older AC panel during a refit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSet of 30 common AC circuit labels, including one blank label for a custom legend\u003c\/li\u003e\n\u003cli\u003eReinforced, weatherproof label material that holds up better in damp marine panel spaces\u003c\/li\u003e\n\u003cli\u003eUsed on Contura Waterproof Fuse Panels, ST Glass Fuse Blocks, and raised rocker and toggle circuit breaker panels\u003c\/li\u003e\n\u003cli\u003e1.438 x 0.438 in. label size helps when checking fit on an existing panel before replacing old legends\u003c\/li\u003e\n\u003cli\u003eCovers common onboard AC loads such as outlets, galley circuits, climate control, entertainment, battery charging, and water heating\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis set is used on Contura Waterproof Fuse Panels, ST Glass Fuse Blocks, and raised rocker and toggle circuit breaker panels. For retrofit work, compare the label window on your existing panel with the 1.438 x 0.438 in. size so the text sits cleanly and stays easy to read at the switch, breaker, or fuse position.\u003c\/p\u003e\u003cp\u003eIt is a practical match for boats with a straightforward AC distribution layout where the panel needs clear names for branch circuits in the cabin, galley, entertainment area, or utility spaces. It also works well when the electrical system is still sound but the original legends are faded, missing, or inconsistent from past modifications.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eFor the cleanest result, remove old labels and residue before applying the new legends, then align each label with the switch, breaker, or fuse position it identifies. Keeping the terminology consistent across the panel makes troubleshooting faster when a charger, inverter-fed outlet, air conditioner, or appliance circuit needs to be shut down or checked.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023119052981,"sku":"QBP901621","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329863_qbp901621.jpg?v=1780191735"},{"product_id":"qbp943856","title":"Blue Sea Systems Extended DC Panel Label Set, For Contura Waterproof Fuse Panels, ST Glass Fuse Blocks, 120 Labels, Weatherproof","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8039 is an extended DC panel label set with 120 labels for identifying common circuits on boat electrical panels. Each label measures 1.438 x 0.438 in. and uses reinforced, weatherproof material, which suits the larger label format found on many DC distribution layouts.\u003c\/p\u003e\u003cp\u003eIt is used on Contura Waterproof Fuse Panels, ST Glass Fuse Blocks, and raised rocker and toggle circuit breaker panels. On board, clear panel labeling makes day-to-day use simpler and helps when tracing a fault, isolating a load, or handing the system over to a technician after a refit or service call.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e120 DC labels for broad circuit coverage across larger panel layouts\u003c\/li\u003e\n\u003cli\u003eReinforced, weatherproof material that stands up better in damp marine spaces\u003c\/li\u003e\n\u003cli\u003e1.438 x 0.438 in. label size for large-format DC panel labeling\u003c\/li\u003e\n\u003cli\u003eFits Contura Waterproof Fuse Panels\u003c\/li\u003e\n\u003cli\u003eFits ST Glass Fuse Blocks\u003c\/li\u003e\n\u003cli\u003eWorks with raised rocker and toggle circuit breaker panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis set is meant for large-format DC panel labeling rather than smaller square label styles. It is a practical match when replacing worn labels, finishing a new panel build, or updating circuit names after adding accessories such as pumps, lights, electronics, or charging equipment.\u003c\/p\u003e\u003cp\u003eFor boats with mixed DC distribution hardware, this label set helps keep naming consistent across fuse panels and breaker panels that use the supported formats. That matters when more than one person runs or services the vessel, especially on cruising boats, fishing boats, and workboats where panel changes tend to build up over time.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eApply the labels after final circuit names are confirmed and the panel face is clean and dry. Taking a few minutes to match circuit names across the helm, cabin, and service areas can make troubleshooting faster later, especially when you need to shut down the right load quickly.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003e120 DC panel labels\u003c\/li\u003e\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023119118517,"sku":"QBP943856","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329864_qbp943856.jpg?v=1780191735"},{"product_id":"qbp804392","title":"Blue Sea Systems Push Button Switch Label Kit, For 4180 \u0026 4181, 50 ICON Labels","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 4230 is a push button switch label kit with 50 icon labels for backlit push button switches. It is made for cleaning up the look of a switch panel while making each function easier to identify at a glance, which matters when you are running lights, pumps, wipers, or other common circuits on board.\u003c\/p\u003e\u003cp\u003eThe labels are made from polycarbonate with scratch-resistant faces, back-printed graphics, and waterproof adhesive. That combination makes sense for helm stations, cabin panels, and other spots where labels need to stay readable through spray, humidity, and regular hands-on use.\u003c\/p\u003e\u003cp\u003eThis kit fits Blue Sea Systems 4180 and 4181 backlit push button switches. It is a good match when you are building a fresh panel, replacing worn labels, or standardizing switch identification across a boat with multiple push button circuits.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIncludes 50 icon labels for backlit push button switch applications\u003c\/li\u003e\n\u003cli\u003eFits Blue Sea Systems 4180 and 4181 backlit push button switches\u003c\/li\u003e\n\u003cli\u003ePolycarbonate label material resists surface scratching during normal panel use\u003c\/li\u003e\n\u003cli\u003eBack-printed icons stay protected from wear on the face of the label\u003c\/li\u003e\n\u003cli\u003eWaterproof adhesive helps the labels stay in place in damp marine environments\u003c\/li\u003e\n\u003cli\u003eUseful for organizing switch functions on helm, dash, cabin, or utility panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is meant for Blue Sea Systems backlit push button switch layouts, not for rocker, toggle, or breaker labels. If your panel uses Blue Sea 4180 or 4181 switches, this kit gives you a wider set of icon options than the small label assortment that comes with the switches themselves.\u003c\/p\u003e\u003cp\u003eFor refits, it helps keep labeling consistent across neighboring controls, which makes the panel quicker to read in low light and easier for guests or crew to understand without guessing which switch does what.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eApplication is straightforward once the switch face is clean and dry. On a boat, that usually means removing salt film, polish residue, or sunscreen from the panel surface before applying the label so the adhesive can bond properly.\u003c\/p\u003e\u003cp\u003eThis is a simple upgrade for owners who want a cleaner control panel without changing wiring or switch hardware. It makes the most sense on boats where several backlit push button switches sit together and clear identification matters during night runs, dockside use, or day-to-day system checks.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023140679861,"sku":"QBP804392","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329940_qbp804392.jpg?v=1780191777"},{"product_id":"qbp684400","title":"Paneltronics - Assorted Label Sheet","description":"\u003ch4\u003eStreamline Your Panel Identification with Paneltronics DC-20 Assorted Label Sheet\u003c\/h4\u003e \u003cp\u003eBring clarity and organization to your marine or land-based electrical panels with the Paneltronics DC-20 Assorted Label Sheet. Designed for easy identification, this comprehensive label sheet allows for quick recognition of various DC electrical functions, enhancing safety and efficiency in your operations.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIncludes a wide range of DC labels to cover essential electrical functions and components.\u003c\/li\u003e \u003cli\u003eMade with durability in mind to withstand the harsh marine environment.\u003c\/li\u003e \u003cli\u003eAdhesive backing ensures labels stay in place even in high-moisture conditions.\u003c\/li\u003e \u003cli\u003eClear, legible printing makes identifying panel functions straightforward.\u003c\/li\u003e \u003cli\u003eIdeal for customizing or retrofitting electrical panels on boats, RVs, and other DC-powered equipment.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Details for Precise Application\u003c\/h4\u003e \u003cp\u003eEach label is crafted with attention to detail, ensuring that you can easily mark and organize your electrical systems with confidence. The adhesive backing is specially designed for marine applications, offering strong adherence to various surfaces.\u003c\/p\u003e \u003ch4\u003eDimensions for Perfect Fit\u003c\/h4\u003e \u003cp\u003eThe compact and versatile labels are sized to fit standard panels, making them a universal solution for various applications. Their precise dimensions ensure a neat and organized appearance on any panel.\u003c\/p\u003e \u003ch4\u003eVariety for Comprehensive Electrical Systems\u003c\/h4\u003e \u003cp\u003eUnderstanding the diverse needs of marine and RV electrical systems, Paneltronics offers this label sheet in the following variations for both DC and AC applications:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e150-061 20DC: A selection of 20 DC labels catering to the most common DC functions and components.\u003c\/li\u003e \u003cli\u003e150-062 20AC: A complementary selection of 20 AC labels for comprehensive panel labeling in systems with AC components.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWith the Paneltronics DC-20 Assorted Label Sheet, you’re equipped to bring order and safety to your electrical panels. The easy-to-use, durable labels ensure that your systems are not only efficient but also up to the highest standards of clarity and identification.\u003c\/p\u003e","brand":"Paneltronics","offers":[{"title":"20DC","offer_id":52023491657909,"sku":"QBP684400-V2","price":10.15,"currency_code":"USD","in_stock":false},{"title":"20AC","offer_id":52023491690677,"sku":"QBP684400-V8","price":10.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1218639_qbp684400.jpg?v=1763255299"},{"product_id":"qbp822927","title":"Newmar Power - LS-I Label Set","description":"\u003ch4\u003eComprehensive Labeling for Marine Electrical Panels\u003c\/h4\u003e\u003cp\u003eThe Newmar Power LS-I Label Set provides a convenient and professional solution for organizing electrical panels on boats and other marine vessels. Designed for clarity and ease of use, this label set ensures that each switch or circuit breaker is properly identified, improving safety and functionality on board. Whether managing lighting, pumps, or power outlets, these labels enhance navigation and operational efficiency for all marine applications.\u003c\/p\u003e\u003ch4\u003ePre-Printed Labels for Essential Marine Systems\u003c\/h4\u003e\u003cp\u003eThis LS-I label set includes 22 pre-printed labels covering a wide range of essential electrical functions commonly found on marine vessels. Each label is designed with high visibility, making it easy to identify circuits and streamline troubleshooting when necessary. The labels are ideal for use on distribution panels, ensuring seamless power management across various onboard systems.\u003c\/p\u003e\u003ch4\u003eDurable and Reliable Construction\u003c\/h4\u003e\u003cp\u003eCrafted for marine environments, these labels are made from high-quality materials designed to withstand the harsh conditions of sea travel. Resistant to moisture, corrosion, and fading, they maintain their legibility and adhesion even in challenging conditions. This ensures long-term reliability for boat owners, captains, and marine electricians alike.\u003c\/p\u003e\u003ch4\u003eLabel Set Contents\u003c\/h4\u003e\u003cp\u003eThe set includes 22 labels for different marine electrical applications, such as:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting \u0026amp; Power\u003c\/strong\u003e: Cabin Lights, Engine Room, Main Cabin, Fore Cabin, Mast, Aft Cabin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNavigation \u0026amp; Communication\u003c\/strong\u003e: NAV\/COM, Running, Windshield, Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePumps \u0026amp; Water Systems\u003c\/strong\u003e: Bilge Pump, Sump Pump, Water Heater, Water Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Outlets \u0026amp; Accessories\u003c\/strong\u003e: Outlets, Refrigerator, Accessory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical \u0026amp; Deck Systems\u003c\/strong\u003e: Windlass, Bow, Spare Spreader\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIncludes 22 essential pre-printed labels\u003c\/li\u003e\n\u003cli\u003eDesigned for marine electrical panels\u003c\/li\u003e\n\u003cli\u003eHigh-visibility print for easy identification\u003c\/li\u003e\n\u003cli\u003eMoisture and corrosion-resistant for durability\u003c\/li\u003e\n\u003cli\u003eHelps enhance safety and efficiency onboard\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWith the Newmar Power LS-I Label Set, maintaining a well-organized and clearly labeled marine electrical system has never been easier. Ideal for both professional marine electricians and boat owners, this label set ensures clarity and reliability in all electrical panel management needs.\u003c\/p\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":52023786897589,"sku":"QBP822927","price":28.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1227788_qbp822927.jpg?v=1763258566"},{"product_id":"qbp223393","title":"Newmar Power - LS-II Label Set","description":"\u003ch4\u003eClear Identification with the Newmar Power LS-II Label Set\u003c\/h4\u003e\u003cp\u003eEnsure seamless labeling and identification with the \u003cstrong\u003eNewmar Power LS-II Label Set\u003c\/strong\u003e. Designed for precision and durability, this set provides clear and professional labeling solutions for marine electrical panels, enhancing organization and efficiency on board. Whether upgrading existing panels or installing a new system, these labels offer a simple yet effective way to keep your electrical components well-marked and easy to identify.\u003c\/p\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDesigned for marine electrical panels, ensuring clarity and ease of use\u003c\/li\u003e\n\u003cli\u003eHigh-quality materials for durability in marine environments\u003c\/li\u003e\n\u003cli\u003eEasy-to-read labeling for quick identification of electrical components\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis \u003cstrong\u003eNewmar Power LS-II Label Set\u003c\/strong\u003e is an essential addition for maintaining a well-organized and efficient marine power system, ensuring critical components are easily recognizable at all times.\u003c\/p\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":52023786930357,"sku":"QBP223393","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1227789_qbp223393.jpg?v=1763258566"},{"product_id":"qbp811833","title":"Newmar Power - LS-III Label Set","description":"\u003ch4\u003eComprehensive Label Set for Marine Electrical Panels\u003c\/h4\u003e\u003cp\u003eThe Newmar Power LS-III Label Set is an essential solution for organizing and identifying electrical circuits on marine vessels. Designed for clarity and durability, this set provides a comprehensive range of pre-printed labels, ensuring that all critical electrical components are correctly marked. Whether for new installations or updating existing panels, this label set enhances safety and efficiency on board.\u003c\/p\u003e\u003ch4\u003eExtensive Label Coverage for All Marine Systems\u003c\/h4\u003e\u003cp\u003eThis deluxe set includes a total of 182 labels, covering a wide array of onboard electrical functions. The LS-III Label Set is packaged with LS-I and LS-II label sets, providing a complete selection of essential identifiers for both AC and DC systems. The pre-printed labels make it easy to categorize and locate controls, switches, and power sources, reducing the risk of confusion or misoperation.\u003c\/p\u003e\u003ch4\u003eKey Features and Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Label Selection\u003c\/strong\u003e – Includes 182 pre-printed labels for a wide variety of marine electrical components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Organization\u003c\/strong\u003e – Helps in quick identification of switches, controls, and circuits, improving operational efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction\u003c\/strong\u003e – Designed to withstand the demanding marine environment, ensuring long-lasting usability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with LS-I and LS-II\u003c\/strong\u003e – Sold as a complete set with additional labels for maximum coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproves Safety\u003c\/strong\u003e – Reduces the risk of electrical mismanagement by providing clear and legible identifiers for crucial power sources and equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eLabel Categories Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower and Electrical Systems:\u003c\/strong\u003e AC Power, DC Power, Generators, Inverter, Load Groups\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e Cabin Lights, Deck Lights, Navigation Lights, Courtesy Lights, Steaming Lights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEquipment and Appliances:\u003c\/strong\u003e Air Conditioning, Microwave Oven, Ice Maker, Refrigerator, Washer\/Dryer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePumps and Motors:\u003c\/strong\u003e Bilge Pumps, Fresh Water Pump, Fuel Pump, Oil Change Pump, Macerator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety and Control Systems:\u003c\/strong\u003e Alarm System, Fire Extinguisher, Horn, Burglar Alarm, Emergency Lights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNavigation and Communication:\u003c\/strong\u003e Auto Pilot, Compass Light, Loud Hailer, Instruments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesigned specifically for marine applications, the Newmar Power LS-III Label Set ensures your vessel’s electrical system remains well-organized and easy to manage. This set is ideal for boat owners, marine technicians, and vessel operators seeking a professional and efficient labeling solution.\u003c\/p\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":52023786963125,"sku":"QBP811833","price":163.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1227790_qbp811833.jpg?v=1763258567"},{"product_id":"qbp422771","title":"Blue Sea Systems Waterproof DC Label Kit, For WeatherDeck Waterproof Panels, Black Square Labels","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Waterproof DC Label Kit is a set of black square DC circuit labels for marking marine electrical panels, switch positions, and breaker layouts. The range includes 30, 60, and 120 label kits, with V1, V2, and Standard versions available, so the label set can match the size and style of the panel work on board.\u003c\/p\u003e\u003cp\u003eThe labels use reinforced, weatherproof material and are used on WeatherDeck Waterproof Panels and Battery Management Panels. They are a practical fit for helms, cockpits, flybridges, battery switch areas, and other DC panel locations where circuit names need to stay readable after washdowns, damp air, and regular handling.\u003c\/p\u003e\u003cp\u003eClear labeling matters when troubleshooting at the dock, checking a bilge pump underway, or handing the boat over to another operator. This kit helps make the DC system easier to understand without changing the panel hardware.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBlack square labels for DC circuit identification on marine panels\u003c\/li\u003e\n\u003cli\u003eReinforced, weatherproof material for panel areas exposed to moisture and regular use\u003c\/li\u003e\n\u003cli\u003eUsed on WeatherDeck Waterproof Panels and Battery Management Panels\u003c\/li\u003e\n\u003cli\u003eWorks with all Blue Sea Systems circuit breaker blocks\u003c\/li\u003e\n\u003cli\u003eAvailable in 30, 60, and 120 label quantities, with V1, V2, and Standard kit versions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe product is offered in four configurations that vary by label quantity and kit version. The shared purpose across the range is DC circuit labeling for Blue Sea Systems panel and breaker layouts, while the selected kit determines how many labels are supplied and which version of the label set is included.\u003c\/p\u003e\u003cp\u003eThe 30-label versions fit smaller DC panels or focused battery-management layouts, while the 60- and 120-label versions give more coverage for boats with more circuits, multiple stations, or refit work across a larger panel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4215: Label Quantity 30, Kit Version V1. A compact 30-label set for targeted DC panel labeling where the V1 label mix matches the circuits on board.\u003c\/li\u003e\n\u003cli\u003e4216: Label Quantity 60, Kit Version Standard. A mid-size Standard set with more coverage for common helm, cabin, pump, lighting, and electronics circuits.\u003c\/li\u003e\n\u003cli\u003e4217: Label Quantity 120, Kit Version Standard. The largest Standard set in this range, useful for larger panels, duplicate stations, or refits involving many DC circuits.\u003c\/li\u003e\n\u003cli\u003e4218: Label Quantity 30, Kit Version V2. A compact 30-label set in the V2 version, commonly matched with battery main distribution and DC panel labeling needs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis label kit is meant for Blue Sea Systems panel labeling rather than general signage. It is especially relevant when replacing worn labels, updating a panel after adding circuits, or building a new DC distribution layout with Blue Sea Systems breakers and panels.\u003c\/p\u003e\u003cp\u003eBefore ordering, compare the circuit names in the selected kit version with the equipment on the vessel. Smaller boats may only need a focused 30-label kit, while cruisers, fishing boats, and sailboats with more electrical loads may benefit from the broader 60- or 120-label sets.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eApply the labels to a clean panel surface so each switch or breaker can be identified quickly. Good placement helps at night, during maintenance, and in urgent situations where a crew member needs to find the right circuit without tracing wires or opening the panel.\u003c\/p\u003e\u003cp\u003eThe labels are well suited for common DC loads such as bilge pumps, navigation lights, electronics, washdown pumps, cabin lights, radios, and battery-related circuits, depending on the selected kit version.\u003c\/p\u003e\u003ch6\u003eCare and maintenance\u003c\/h6\u003e\u003cp\u003eKeep the panel face clean with normal boat-safe cleaning methods and avoid harsh scraping around the labels. During seasonal checks or electrical upgrades, review the label layout so each breaker name still matches the actual circuit it controls.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"30 \/ V1","offer_id":52581919654069,"sku":"QBP422771-V2","price":22.99,"currency_code":"USD","in_stock":true},{"title":"60 \/ Standard","offer_id":52581919686837,"sku":"QBP422771-V6","price":24.99,"currency_code":"USD","in_stock":true},{"title":"120 \/ Standard","offer_id":52581919719605,"sku":"QBP422771-V9","price":32.99,"currency_code":"USD","in_stock":true},{"title":"30 \/ V2","offer_id":52581919752373,"sku":"QBP422771-V10","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1334209_qbp422771.webp?v=1780201542"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/distribution-panel-labels.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}