{"title":"Cord Holders \u0026 Covers","description":"","products":[{"product_id":"qbp430873","title":"TACO Marine Tele-Sun Aluminum Shade Poles, 44.6-69.37 in, 2pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T10-7001VEL is a pair of telescoping aluminum shade poles for adding temporary shade support at the bow or stern using existing marine rod holders. Each pole telescopes from just over 44.6 in to 69.37 in tall, giving boat owners a practical way to support shade fabric over open deck areas, cockpits, sandbar setups, or lounging areas when the sun is high.\u003c\/p\u003e\u003cp\u003eThe poles are made from drawn and anodized aluminum tube, with a 1-1\/2 in main tube and a 1-1\/4 in inner tube. They install into deck-mounted rod holders using a 1\/4 in rod holder pin, then work with shade fabric that is secured to the boat top and attached to the pole ends.\u003c\/p\u003e\u003cp\u003eA nylon cleat is built in for line tension adjustment, and the tip eye bolt gives another option for securing fabric with a bungee-style clamping setup. The shade fabric and rod holders are not included, so this item is best matched to boats that already have compatible rod holders or are being outfitted with them.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePair of telescoping shade poles for temporary bow or stern shade support on boats.\u003c\/li\u003e\n\u003cli\u003eHeight adjusts from just over 44.6 in to 69.37 in for positioning shade fabric over the deck area.\u003c\/li\u003e\n\u003cli\u003eDrawn and anodized aluminum tube construction helps keep the poles light while adding resistance for marine use.\u003c\/li\u003e\n\u003cli\u003e1-1\/2 in main tube and 1-1\/4 in inner tube match the published pole specifications.\u003c\/li\u003e\n\u003cli\u003eInstalls into deck-mounted rod holders with a 1\/4 in pin for a secure pole base.\u003c\/li\u003e\n\u003cli\u003eNylon cleat allows line tension to be adjusted after the shade fabric is set in place.\u003c\/li\u003e\n\u003cli\u003eTip eye bolt supports an alternate fabric clamping method using a bungee cord system.\u003c\/li\u003e\n\u003cli\u003eSilver finish coordinates well with common deck hardware, rod holders, and aluminum boat fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eSetup is straightforward when the boat already has suitable rod holders in the intended mounting position. Insert the poles into the rod holders, attach the shade fabric to the boat top, connect the fabric to the pole ends, then extend the poles until the shade is sitting where it needs to be.\u003c\/p\u003e\u003cp\u003eThe poles can be used forward or aft, depending on the boat layout and where the rod holders are located. Before ordering, confirm rod holder placement, shade fabric size, line routing, and clearance around engines, antennas, outriggers, and other deck equipment.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe rod holder inside diameter specification is 1-1\/2 in, and the rod holder pin diameter is 1\/4 in. The poles are intended for deck-mounted rod holders, so fit depends on the rod holder style, angle, diameter, and available depth on the vessel.\u003c\/p\u003e\u003cp\u003eThese poles are a good match for boaters who want removable shade support without leaving a fixed frame on the boat. They suit day boating, fishing breaks, raft-ups, sandbar use, and dockside shade setups where quick installation and easy storage matter.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo Aluminum Tele-Sun shade poles.\u003c\/li\u003e\n\u003cli\u003eCarry bag.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023080059061,"sku":"QBP430873","price":524.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331481_qbp430873.jpg?v=1780191681"},{"product_id":"qbp710307","title":"TACO Marine Pro Series Shock Cord Pulley with Triple Roller, 16 in Shock Cord, Ball Bearing Pulleys, Stainless-Steel Hook Clasps, 2pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine COK-0043-1 is a Pro Series triple roller shock cord pulley for managing triple-rigged outrigger halyard lines on offshore fishing boats. It uses 16 inches of shock cord with ball bearing pulleys, stainless-steel hook clasps, and shrink-wrapped ends to keep line movement controlled during deployment and retrieval.\u003c\/p\u003e\u003cp\u003eThis setup is made for anglers running outrigger halyards where smooth line travel and steady shock cord tension matter. The triple roller layout helps reduce friction through the rigging path, while the hook clasps make attachment straightforward when setting up or servicing the rig.\u003c\/p\u003e\u003cp\u003eEach unit measures 7\/8 inch high, 1-5\/8 inches wide, and 22-1\/4 inches overall length, with product dimensions listed per piece. Retail packaging may contain multiple pieces, so package quantity should be checked against the listing before purchase.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTriple roller block for professional triple-rigged halyard lines on offshore outrigger setups.\u003c\/li\u003e\n\u003cli\u003e16 inches of shock cord to help maintain tension as lines are deployed, retrieved, or adjusted.\u003c\/li\u003e\n\u003cli\u003eBall bearing pulleys support smoother line movement through the block.\u003c\/li\u003e\n\u003cli\u003eStainless-steel hook clasps give the pulley a secure attachment point in exposed fishing areas.\u003c\/li\u003e\n\u003cli\u003eShrink-wrapped ends help protect the cord terminations from chafe and handling wear.\u003c\/li\u003e\n\u003cli\u003eCompact per-piece dimensions of 7\/8 inch height, 1-5\/8 inches width, and 22-1\/4 inches overall length help with fit checks before rigging.\u003c\/li\u003e\n\u003cli\u003eBacked by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis pulley is intended for outrigger and halyard rigging rather than electrical or plumbing installation, so fit mainly depends on the vessel’s existing rigging layout, attachment points, and line path. Before installing, confirm that the shock cord length, clasp style, and overall length match the way your outriggers are rigged.\u003c\/p\u003e\u003cp\u003eWhen replacing an existing shock cord pulley, compare the current block location, tension, and line angle before removal. The pulley should sit where the halyard can travel cleanly through the rollers without rubbing against hard corners, tower structure, or nearby hardware.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a practical fit for offshore fishing boats using triple-rigged halyard lines where crews need quick line handling from the cockpit, tower, or rigging station. It is especially useful on boats where outrigger lines are adjusted often during trolling and need to move with less friction.\u003c\/p\u003e\u003cp\u003eRoutine rinsing after saltwater use and checking the shock cord, clasp, and shrink-wrapped ends for wear will help keep the rigging working smoothly through the season.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023119839413,"sku":"QBP710307","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331738_qbp710307.jpg?v=1780191744"},{"product_id":"qbp412692","title":"Attwood Marine Rod Storage Holder, 3-Rod, Vertical or Horizontal Mount, Closed-Cell Foam Insert, 8-3\/4 in x 2-1\/2 in","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 12750-6 is a rod storage holder that keeps up to three fishing rods together and off the deck when they are not in use. It mounts vertically or horizontally, and the holder measures 8-3\/4 inches long by 2-1\/2 inches wide, so it can fit into many boat storage layouts without taking much room.\u003c\/p\u003e\u003cp\u003eA closed-cell foam insert supports the rods at the contact points to help reduce scuffing during storage and transport around the boat. This is a straightforward way to keep rods organized in a cockpit, console area, cabin side, locker, garage, or tackle room where loose gear quickly becomes a problem.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStores up to 3 fishing rods in one compact holder\u003c\/li\u003e\n\u003cli\u003eClosed-cell foam insert helps protect rod blanks during storage\u003c\/li\u003e\n\u003cli\u003eCan be mounted vertically or horizontally to suit the available space\u003c\/li\u003e\n\u003cli\u003e8-3\/4 inch x 2-1\/2 inch size works well where mounting room is limited\u003c\/li\u003e\n\u003cli\u003eUseful for keeping rods gathered in one place instead of laying loose on deck or in a locker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis holder works best on a flat mounting surface with enough clearance for the rods, reels, and guides once they are loaded. Before drilling, it is worth checking how the rods will sit in either a vertical or horizontal position so handles and tips do not interfere with nearby seating, hatches, or wiring runs.\u003c\/p\u003e\u003cp\u003eIts compact footprint makes it a practical option for smaller fishing boats and for secondary storage spots on larger boats where a full rack would take too much space. Horizontal mounting can help along side panels or inside storage spaces, while vertical mounting can make sense where height is easier to spare than width.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis holder is a good match for anglers who carry a few rods rigged and ready and want them kept together between stops, at the dock, or during trailering and day-to-day storage. It suits boats where keeping the deck clear matters just as much as protecting the rods themselves.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":52023527702709,"sku":"QBP412692","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329642_qbp412692.jpg?v=1780191856"},{"product_id":"qbp938521","title":"Standard Horizon - Blue Battery Cover - For Standard HX890NB","description":"\u003ch4\u003eUnmatched Durability for Your Marine Adventures\u003c\/h4\u003e\u003cp\u003eIntroducing the Standard Horizon Blue Battery Cover, the perfect companion for your HX890NB Handheld VHF\/GPS Radio. Crafted with marine-grade materials, this battery cover ensures your communication device remains protected against the harsh conditions of the sea. Whether you're navigating through rough waters or enjoying a serene day on the ocean, this cover provides the reliability and durability you need.\u003c\/p\u003e\u003ch4\u003eKey Features at a Glance\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust Protection\u003c\/strong\u003e: Made from high-quality materials that withstand the demanding marine environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect Fit\u003c\/strong\u003e: Specifically designed to fit the Standard Horizon HX890NB Handheld VHF\/GPS Radio, ensuring a secure and snug fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibrant Blue Finish\u003c\/strong\u003e: The striking blue color not only looks great but also makes your radio easy to spot in any condition.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eEngineered for Excellence\u003c\/h4\u003e\u003cp\u003eThe Standard Horizon Blue Battery Cover is more than just a protective case. It's engineered to enhance the performance of your HX890NB radio, keeping it safe from moisture, dust, and impact. With its seamless design, you can easily install and remove the cover, making battery changes a breeze.\u003c\/p\u003e\u003ch4\u003ePrecision Dimensions\u003c\/h4\u003e\u003cp\u003eTo ensure compatibility and ease of use, the battery cover boasts precise dimensions that align perfectly with your radio. This attention to detail guarantees that the cover won't impede any functions of your HX890NB, allowing you to communicate effortlessly while on the water.\u003c\/p\u003e\u003ch4\u003eSleek and Functional Finishes\u003c\/h4\u003e\u003cp\u003eAvailable in a vibrant blue finish, this battery cover not only adds a touch of style to your equipment but also serves a practical purpose. The color is easy to spot, even in low-light conditions, ensuring that your radio is always within reach.\u003c\/p\u003e\u003ch4\u003eWhy Choose Standard Horizon Blue Battery Cover?\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Quality\u003c\/strong\u003e: Designed to withstand the challenges of marine environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase of Use\u003c\/strong\u003e: Simple to install and remove, making maintenance quick and hassle-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Visibility\u003c\/strong\u003e: The bright blue color ensures your radio is easily identifiable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eA Must-Have for Marine Enthusiasts\u003c\/h4\u003e\u003cp\u003eWhether you're a seasoned sailor or a weekend boater, the Standard Horizon Blue Battery Cover is an essential accessory for your HX890NB Handheld VHF\/GPS Radio. It provides the protection and functionality you need to stay connected and safe on the water.\u003c\/p\u003e","brand":"Standard Horizon","offers":[{"title":"Default Title","offer_id":52023659397301,"sku":"QBP938521","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1223543_qbp938521.jpg?v=1763257303"},{"product_id":"qbp279527","title":"Whitecap S.S. Cable Holder S-6241","description":"\u003cp\u003e304 S.S. Shore Power Cable Holder\u003cbr\u003eTube Diameter: 1-1\/4\"\u003cbr\u003eOverall Height: 27\"\u003cbr\u003eInside Ring Diameter: 3\/4\"\u003c\/p\u003e \u003cp\u003eFits all standard shore power cables. Tube bottom has 2 slots for multiple positions.\u003c\/p\u003e","brand":"Whitecap","offers":[{"title":"Default Title","offer_id":52024088002741,"sku":"QBP279527","price":103.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1245643_qbp279527.jpg?v=1763264731"},{"product_id":"qbp937312","title":"Beckson Soft-Mate Binocular Holder - White HH-4","description":"\u003cb\u003eSoft-Mate Binocular Holder\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eFor binoculars, magazines, log books and tools\u003c\/li\u003e\n\u003cli\u003eFlexible P.V.C.\u003c\/li\u003e\n\u003cli\u003eIncludes mounting screws\u003c\/li\u003e\n\u003cli\u003eHeight: 8-1\/4\" (21cm)\u003c\/li\u003e\n\u003cli\u003eWidth: 8-3\/4\" (22.2cm)\u003c\/li\u003e\n\u003cli\u003eDiameter: 2-3\/4\" (6.9cm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Beckson Marine","offers":[{"title":"Default Title","offer_id":52024125096117,"sku":"QBP937312","price":96.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1247775_qbp937312.jpg?v=1763265437"},{"product_id":"qbp161748","title":"Rod Saver Rope Wrap - 10\" RPW10","description":"\u003cp\u003e\u003cstrong\u003eRope Wrap - 10\"\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeep your ski\/tube\/wakeboard ropes tangle free for quick and easy unwinding and retrieval. Store multiple ropes in the boat without ever having to worry about tangled ropes again. Grommet for convenient storage indoors. 10\"\u003c\/p\u003e","brand":"Rod Saver","offers":[{"title":"Default Title","offer_id":52024213799093,"sku":"QBP161748","price":12.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1254208_qbp161748.jpg?v=1763267379"},{"product_id":"qbp856827","title":"Rod Saver Rope Wrap - 16\" RPW16","description":"\u003cp\u003e\u003cstrong\u003eRope Wrap - 16\"\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeep your ski\/tube\/wakeboard ropes tangle free for quick and easy unwinding and retrieval. Store multiple ropes in the boat without ever having to worry about tangled ropes again. Grommet for convenient storage indoors. 16\"\u003c\/p\u003e","brand":"Rod Saver","offers":[{"title":"Default Title","offer_id":52024213831861,"sku":"QBP856827","price":13.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1254210_qbp856827.jpg?v=1763267379"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/cord-holders-covers.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}