{"title":"Seat Pedestals, Posts \u0026 Packs","description":"","products":[{"product_id":"qbp743963","title":"Attwood Marine Snap-Lock Seat Mount, For 1.77 in Posts, 3 Degree Tilt, E-Coated Steel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine SP-19000 is a Snap-Lock seat mount for 1.77 in. pedestal systems that use a 1-3\/4 in. D post. It has a 3 degree tilt and an E-coated steel body, which makes it a straightforward replacement or new-install part when you need the seat to lock onto the pedestal instead of lifting free.\u003c\/p\u003e\u003cp\u003eThis mount sits at the seat end of a compatible pedestal setup and is built for the Attwood Snap-Lock 1.77 seating system. That lock-up is useful on boats where the seat sees spray, vibration, and frequent movement around the cockpit or helm.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits Snap-Lock 1.77 pedestal systems that use a 1-3\/4 in. D post\u003c\/li\u003e\n\u003cli\u003eBuilt-in 3 degree tilt at the seat mount\u003c\/li\u003e\n\u003cli\u003eSnap-Lock connection holds the mount onto the post for a more secure seat attachment underway\u003c\/li\u003e\n\u003cli\u003eE-coated steel construction helps resist corrosion in wet marine use\u003c\/li\u003e\n\u003cli\u003eBlack finish works with common pedestal and seat hardware layouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCheck the pedestal size before ordering. This mount is for the 1.77 in. Snap-Lock family and a 1-3\/4 in. D post, so it should be matched to that seating setup rather than treated as a universal seat mount. On a replacement job, compare the post shape, diameter, and locking style at the top of the pedestal.\u003c\/p\u003e\u003cp\u003eIt is a good match for helm, passenger, or fishing-seat positions that use removable pedestal seating and need the seat mount to stay positively engaged with the post.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe SP-19000 is used when mounting the seat onto the top of a compatible pedestal. The 3 degree tilt gives the seat a slight rear angle, which can feel more natural at the helm or in a leaning position. Once installed, make sure the mount is fully snapped and locked onto the post before running the boat or trailering.\u003c\/p\u003e\u003cp\u003eOn boats that stay outside or get frequent washdowns, rinsing salt residue off the seating hardware and checking fastener tightness as part of normal maintenance will help keep the finish in better shape and the locking action working as it should.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis seat mount makes sense on fishing boats, ski boats, and family runabouts that already use the Snap-Lock 1.77 pedestal platform. It is especially useful where seats are removed, reinstalled, or repositioned through the season and still need a locked connection once back in place.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eSP-19000\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721566871733,"sku":"QBP743963","price":61.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1322190_qbp743963.jpg?v=1794118378"},{"product_id":"qbp301101","title":"Attwood Marine 238 Series Fixed Height Bell Seat Pedestal, 2-3\/8 in Tube, Hard-Anodized Aluminum","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 238 Series is a fixed-height 2-3\/8 inch bell pedestal range for boat seating installations that need a solid deck-mounted base without an adjustable height mechanism. These pedestals use a hard-anodized aluminum tube on a 9 inch round aluminum base, with height options of 8 inches, 11 inches, and 12 inches in this listing. Each listed height is measured from the deck to the top of the seat mount.\u003c\/p\u003e\u003cp\u003eThis series is used for helm, cockpit, and fishing seating where a set seating position is preferred. The AO rating supports Type A\/Operator use, so it can be used in helm or driver seating applications when installed with compatible 238 Series seating hardware and suitable deck reinforcement.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFixed-height 2-3\/8 inch bell pedestal format for Attwood and Swivl-Eze 238 Series seating systems.\u003c\/li\u003e\n\u003cli\u003e9 inch round aluminum base with a hard-anodized aluminum pedestal tube for wet cockpit and deck installations.\u003c\/li\u003e\n\u003cli\u003eABYC AO classification for Type A\/Operator seating, including helm or driver positions.\u003c\/li\u003e\n\u003cli\u003eBase surface is bead-blasted to close aluminum porosity, then clear coated to help resist scuffing and corrosion.\u003c\/li\u003e\n\u003cli\u003eStainless steel spring components reduce corrosion risk inside the seating hardware.\u003c\/li\u003e\n\u003cli\u003eHeight is measured from the deck to the top of the seat mount, which helps when matching an existing seating position.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple fixed-height configurations for different helm, cockpit, and fishing-seat layouts.\u003c\/p\u003e\u003cp\u003eThe variable attribute in this listing is pedestal height. The 2-3\/8 inch 238 Series format, hard-anodized aluminum tube, 9 inch round base, and AO classification remain consistent across these three variants.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e238908-1: Height 8 inches. This lower fixed pedestal keeps the seat closer to the deck, which can suit cockpit layouts where overhead clearance, console reach, or a lower seating position matters.\u003c\/li\u003e\n\u003cli\u003e238911-1: Height 11 inches. This height gives a moderate seat rise for helm or fishing seating without adding an adjustable pedestal mechanism.\u003c\/li\u003e\n\u003cli\u003e238912-1: Height 12 inches. This configuration adds one more inch over the 11 inch version for setups where sightline over the console or deck fit benefits from the extra height.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and installation\u003c\/h6\u003e\u003cp\u003eThe 238 Series is a matched seating hardware system, and these pedestals should be paired with compatible Attwood or Swivl-Eze 238 Series seat mounts and related components. Mixing with other manufacturers' pedestal parts is not recommended because fit, locking action, and seating rating depend on the matching post, mount, and base geometry.\u003c\/p\u003e\u003cp\u003eBefore drilling, confirm seat height at the helm or fishing position, check clearance for the seat shell and arm movement, and verify that the deck has enough backing structure for the loads created by passengers, turns, and rough water. Use fasteners and bedding materials appropriate for the deck material and exposure on the boat.\u003c\/p\u003e\u003ch6\u003eMaterials and corrosion resistance\u003c\/h6\u003e\u003cp\u003eThe pedestal tube is hard-anodized aluminum, and the base surface is bead-blasted and clear coated. That combination is useful in wet cockpit and fishing-boat areas where spray, sunscreen, fish residue, and regular cleaning can be tough on unfinished aluminum.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis range is a practical match for anglers, center-console owners, and runabout owners replacing a fixed pedestal within the same 238 Series system. The shorter 8 inch version keeps seating low, while the 11 inch and 12 inch versions help raise the seating position for visibility at the console or comfort at a casting deck.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e238912-1\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e238911-1\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e238908-1\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"12\"","offer_id":53721577357493,"sku":"QBP301101-V3","price":102.18,"currency_code":"USD","in_stock":false},{"title":"11\"","offer_id":53721577390261,"sku":"QBP301101-V2","price":99.63,"currency_code":"USD","in_stock":false},{"title":"8\"","offer_id":53721577423029,"sku":"QBP301101-V1","price":67.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1327556_qbp301101.jpg?v=1794118721"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/cat-seat-pedestals-posts-packs.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}