{"title":"Navigation Lights","description":"","products":[{"product_id":"qbp197813","title":"Lumitec Composite Surface-Mount Starboard Green Nav Light, 10-30V, 2NM","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101597 is a navigation light with starboard (green) output that runs on 10 to 30 VDC and meets USCG requirements for 2 nautical mile visibility. It also meets ABYC A-16 navigation lighting standards.\u003c\/p\u003e\u003cp\u003eThis is the composite, surface-mount style meant for horizontal mounting surfaces when you do not have a molded-in recess. It measures about 2.51 in wide by 2.19 in tall and stands about 0.95 in off the surface, which helps it fit cleanly on a bow cap, gunwale, or hardtop edge.\u003c\/p\u003e\u003cp\u003eInstall it on the starboard side near the bow and keep the lens clear of obstructions so the required sector is not blocked by rails, the hull, deck structures, or onboard hardware under normal running trim.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStarboard green sidelight output for a standard running-light setup\u003c\/li\u003e\n\u003cli\u003eMeets USCG requirements for 2 nautical mile visibility\u003c\/li\u003e\n\u003cli\u003eAccepts 10 to 30 VDC for 12 V and 24 V electrical systems\u003c\/li\u003e\n\u003cli\u003eComposite, surface-mount body suited to horizontal mounting locations\u003c\/li\u003e\n\u003cli\u003eCompact size: about 2.51 in x 2.19 in overall, about 0.95 in tall\u003c\/li\u003e\n\u003cli\u003eMeets ABYC A-16 navigation lighting standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eUse the orientation template to keep the starboard unit aligned correctly on the vessel, then pre-drill for #6 tapping screws. Route the power wire through the wire exit hole and seal around the cable with a marine sealant to help keep spray out.\u003c\/p\u003e\u003cp\u003eFeed the light from a fused navigation-light circuit and verify the light is not shaded by fixed structures or gear once the boat is loaded and trimmed the way you normally run.\u003c\/p\u003e\u003ch6\u003eWho it fits\u003c\/h6\u003e\u003cp\u003eThis light is a practical choice for boats that need a low-profile sidelight on a flat mounting surface and operate on a 12 V or 24 V DC system.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e101597\u003c\/span\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":53721537675445,"sku":"QBP197813","price":149.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1281380_qbp197813.jpg?v=1794117129"},{"product_id":"qbp519991","title":"Lopolight 360 Degree Navigation Light, Blue Dinner and White Lights, 2nm, 10-32VDC, IP68, Horizontal Mount, Black HDPE Base","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lopolight 200-012G2+022G2 is a 2 nm 360° white anchor light combined with a 2 nm 360° blue dinner light in a single housing for horizontal mounting.\u003c\/p\u003e\u003cp\u003eIt runs on 10-32VDC, so it fits both 12V and 24V boats, and the sealed IP68 construction is meant for exposed mounting on hardtops, arches, and masts. The overall footprint is Ø92.5mm x 68mm, and the unit comes pre-cabled with a 0.75m shielded marine-grade lead for routing back to a switch panel or nav light controller.\u003c\/p\u003e\u003cp\u003eThe housing uses aluminum with black anodizing (25µ) with a PMMA lens and A4 stainless steel fasteners, and it is rated for -25°C to 55°C. Current draw is 167mA at 12VDC and 110mA at 24VDC, with light intensity \u0026gt;5.4cd and 2 nm visibility. It is approved to COLREG72, EN14744, IEC 60945, IACS E10, USCG, ABS, M.E.D., DNV, and LR, and it is specified for vessels up to 50m.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo all-round light functions in one unit: 2 nm 360° white and 2 nm 360° blue.\u003c\/li\u003e\n\u003cli\u003e10-32VDC input supports both 12V and 24V systems.\u003c\/li\u003e\n\u003cli\u003eIP68 sealing for rain, spray, and washdowns on exposed mounting locations.\u003c\/li\u003e\n\u003cli\u003eHorizontal mount on a black HDPE base; overall size Ø92.5mm x 68mm.\u003c\/li\u003e\n\u003cli\u003ePre-cabled with a 0.75m shielded marine-grade cable and a 0.7m cable lead at the light.\u003c\/li\u003e\n\u003cli\u003eAluminum housing with black anodizing (25µ), PMMA lens, and A4 stainless steel screws.\u003c\/li\u003e\n\u003cli\u003eRated operating temperature range of -25°C to 55°C.\u003c\/li\u003e\n\u003cli\u003eApproved to COLREG72, EN14744, IEC 60945, IACS E10, USCG, ABS, M.E.D., DNV, and LR.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNavigation light assembly with white and blue functions, pre-cabled (0.75m shielded marine-grade cable)\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eThis unit is intended for horizontal mounting, so it is typically installed on a flat surface such as a radar arch, hardtop, or a dedicated light platform where it has clear 360° visibility. When planning the run, protect the cable where it passes through decks or tubing and keep connections in a dry junction point whenever possible.\u003c\/p\u003e\u003cp\u003eBecause it accepts 10-32VDC, it can be tied into standard DC lighting circuits on most boats. Before final fastening, power the unit and confirm your switching arrangement matches the white anchor function and the blue dinner function you plan to use.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for yachts and leisure vessels that want an approved 2 nm all-round white anchor light while also having an all-round blue signal light available from the same mounting point. It helps reduce clutter aloft when you would otherwise need two separate fixtures.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the light with fresh water after heavy salt spray and avoid abrasive cleaners on the lens. As part of routine checks, make sure the mounting screws stay snug and the cable jacket is not chafed where it enters the structure.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e200-012G2+022G2\u003c\/span\u003e","brand":"Lopolight","offers":[{"title":"Default Title","offer_id":53721606324405,"sku":"QBP519991","price":1916.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1281375_qbp519991.png?v=1794119465"},{"product_id":"qbp410202","title":"Attwood Marine LightArmor LED All-Round Folding Pole Light, 2-Pin Standard Pole, 10.5-14.4V DC, 2-Mile 360° Visibility","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine LightArmor is an LED all-round folding pole light for 12V boat navigation lighting, with 2 nautical mile, 360-degree visibility for boats up to 39.4 ft (12 m). It runs on 10.5V DC to 14.4V DC and draws 1.8 watts at 12V DC, making it a practical fit for small powerboats that need an all-round white light without adding much electrical load.\u003c\/p\u003e\u003cp\u003eThis LightArmor pole light uses a mid-point hinge so the pole folds in half for storage. That matters on boats where a taller all-round light is needed to sit at least one meter above the sidelights, but a full-length pole is awkward to stow in a locker, under a gunwale, or inside a console.\u003c\/p\u003e\u003cp\u003eThe standard 2-pin pole format is intended for compatible 2-pin bases. The LED light engine includes anti-glare and condensation-management features, and the electronics are built to handle shock, corrosion, and water exposure in normal marine use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2 nautical mile, 360-degree all-round white visibility for boats up to 39.4 ft (12 m).\u003c\/li\u003e\n\u003cli\u003eOperates from 10.5V DC to 14.4V DC for typical 12V marine electrical systems.\u003c\/li\u003e\n\u003cli\u003eLow 1.8-watt draw at 12V DC helps limit battery drain during night operation or anchoring.\u003c\/li\u003e\n\u003cli\u003eMid-point folding pole makes a long navigation light easier to store when it is removed from the base.\u003c\/li\u003e\n\u003cli\u003eStandard 2-pin pole connection for use with compatible 2-pin light bases.\u003c\/li\u003e\n\u003cli\u003eAnti-glare light engine helps reduce stray light at the helm and supports better night vision.\u003c\/li\u003e\n\u003cli\u003eRated for more than 50,000 hours of LED use.\u003c\/li\u003e\n\u003cli\u003eUSCG certified for the stated 2 nautical mile all-round navigation light application.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two pole-length configurations. Both are LightArmor LED all-round folding pole lights with a standard 2-pin pole format; the practical difference is the overall pole length.\u003c\/p\u003e\u003cp\u003eThe length should be matched to the boat’s light placement so the all-round light sits high enough above the sidelights and surrounding structures when installed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e5570-60-1: 60-inch pole length. This version suits installations where a 60-inch all-round light gives the needed height while keeping the removed pole a little easier to stow.\u003c\/li\u003e\n\u003cli\u003e5570-72-1: 72-inch pole length. This version gives extra height for boats where the mounting base sits lower or where the light needs to clear windshields, canvas, or other deck structures.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eCheck the existing base before ordering. This is the standard 2-pin pole style, so the plug and collar style need to match the base already installed on the boat or the replacement base being used.\u003c\/p\u003e\u003cp\u003eFor navigation light placement, verify that the all-round light will be visible through a full 360 degrees and will not be blocked by a bimini, T-top, windshield frame, rod holders, antennas, or passengers. On many small powerboats, the longer pole is used when the base is mounted low at the transom or aft deck.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis light is a good match for boats that need a removable all-round white light for running after dark, sitting at anchor, or complying with navigation light requirements on evening fishing trips and dock-to-dock runs. The folding pole is especially useful when storage space is tight and a rigid long pole would be inconvenient.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e5570-60-1\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e5570-72-1\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"60\"","offer_id":53721615007925,"sku":"QBP410202-V1","price":122.82,"currency_code":"USD","in_stock":false},{"title":"72\"","offer_id":53721615040693,"sku":"QBP410202-V2","price":136.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1327598_qbp410202.jpg?v=1794120623"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/cat-navigation-lights.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}