{"title":"JL Audio","description":"","products":[{"product_id":"qbp346091","title":"JL Audio MTPOD-M100-CL Tweeter Mounting Pods, For M-Series Component Tweeters, Clear Anodized, Billet Aluminum, Surface or Deck Mount, Pair","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-13722-00 is a pair of billet aluminum tweeter mounting pods with a clear anodized finish for surface or deck installs on boats.\u003c\/p\u003e\u003cp\u003eEach pod is machined from a single piece of aluminum and uses a slightly up-angled base, which helps aim the highs toward the cockpit instead of straight across the deck. A dedicated wire pathway lets you route the tweeter leads out of sight so the install stays clean.\u003c\/p\u003e\u003cp\u003eFor layout and clearance, each pod measures 2.38 in (60 mm) in diameter with a mounted height of 2.50 in (64 mm) and a mounted depth of about 3.55 in (90 mm). Tweeters are not included.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminum pod with a clear anodized finish that resists corrosion in a saltwater environment\u003c\/li\u003e\n\u003cli\u003eSurface or deck mounting style for installs where a flush mount is not practical\u003c\/li\u003e\n\u003cli\u003eSlightly up-angled base to help spread high frequencies across seating areas\u003c\/li\u003e\n\u003cli\u003eInternal pathway to route and conceal tweeter wiring\u003c\/li\u003e\n\u003cli\u003eMade to house Legacy JL Audio M-Series component tweeters (sold separately)\u003c\/li\u003e\n\u003cli\u003ePod dimensions: 2.38 in (60 mm) diameter, 2.50 in (64 mm) mounted height, 3.55 in (90 mm) mounted depth\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eTwo tweeter mounting pods (one pair)\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThese pods are sized for Legacy JL Audio M-Series component tweeters. If you are pairing them with a different series or a different brand, confirm the tweeter body and flange dimensions before drilling so the tweeter seats correctly in the pod.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePick a mounting spot with enough backside clearance for the 3.55 in (90 mm) mounted depth and a protected route for the speaker wire. On thin fiberglass, aluminum, or composite panels, backing washers or a backing plate help keep the mount solid under vibration.\u003c\/p\u003e\u003cp\u003eAfter drilling, seal exposed core material and fastener holes to keep water out of the laminate. Route audio wiring away from high-current power runs and ignition components to help avoid noise in the system.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eCommon mounting locations include a T-top, hardtop, radar arch, wake tower, and under-gunwale areas where you want the highs aimed toward the cockpit. This is a good match for boats that get regular spray and need a clean, sturdy surface-mount option for component tweeters.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e010-13722-00\u003c\/span\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":53721537478837,"sku":"QBP346091","price":193.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1281151_qbp346091.jpg?v=1794117128"},{"product_id":"qbp496566","title":"Jl Audio M6 8 in Marine Subwoofer, 200W RMS, 4 Ohm, Infinite Baffle, White Luxe Grille","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Jl Audio 010-03508-00 is an 8-inch marine subwoofer for infinite-baffle installs with a white trim ring and a white low-profile Luxe grille.\u003c\/p\u003e\u003cp\u003eIt is a 4 O driver rated for 200 W RMS, with a recommended amplifier range of 50 to 200 W RMS. Sensitivity is 86.8 dB (1 W\/1 m), which helps when you are balancing bass output with cockpit and cabin speakers.\u003c\/p\u003e\u003cp\u003eFor fit, the cutout is 8.625 in (219 mm) and the overall diameter is 10.25 in (260 mm). Plan on 6.30 in (160 mm) of clearance behind the mounting surface, plus about 0.48 in (12 mm) of grille protrusion in front.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e8-inch marine subwoofer optimized for infinite-baffle (free air) mounting\u003c\/li\u003e\n\u003cli\u003e4 O impedance, 200 W continuous (RMS) power handling\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 50 to 200 W RMS\u003c\/li\u003e\n\u003cli\u003eRuns best with at least 1.5 cu ft (42.5 L) of open air volume behind the driver in infinite-baffle installs\u003c\/li\u003e\n\u003cli\u003eCutout: 8.625 in (219 mm); overall diameter: 10.25 in (260 mm)\u003c\/li\u003e\n\u003cli\u003eClearance behind panel: 6.30 in (160 mm); grille protrusion: 0.48 in (12 mm)\u003c\/li\u003e\n\u003cli\u003eInjection-molded, mica-filled polypropylene cone with a rubber surround\u003c\/li\u003e\n\u003cli\u003eGrille and trim ring can be removed for painting to match a refit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInfinite-baffle mounting means the back of the subwoofer vents into a large cavity instead of a sealed box. On boats, common locations are a helm side panel, cockpit seating base, cabin settee face, or a bulkhead that opens into a locker. The goal is to keep the front wave separated from the back wave, so the mounting panel needs to be stiff, well-sealed, and free of air leaks.\u003c\/p\u003e\u003cp\u003eLeave room behind the driver for wiring and airflow and avoid packing gear tightly against the basket. If you are installing it in a dedicated sealed or ported enclosure instead of free air, use a rigid box plan sized for an 8-inch subwoofer and mount it where it stays dry.\u003c\/p\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eThis is a 4 O subwoofer, so verify your amplifier channel is stable at 4 O and can deliver clean power in the 50 to 200 W RMS range. Most systems come together when the sub channel is low-passed and the main speakers are high-passed, so smaller speakers are not working hard on deep bass.\u003c\/p\u003e\u003cp\u003eUse tinned copper speaker wire with secure terminations and route it away from high-current power runs when possible. For open-cockpit installs, mount it where water does not sit against the grille, and make sure the space behind the panel has a path to drain and dry out.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis subwoofer is a good match when you want more low end but do not have room for a large box. It fits well on center consoles, cruisers, and sport boats that have usable volume behind a bulkhead or inside a seat base, including setups that see regular vibration, spray, and sun.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt off the grille during washdowns and avoid harsh cleaners on the cone and surround. If you plan to repaint the trim ring or grille, remove them first so paint does not clog the mesh or build up on the mating surfaces.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e010-03508-00\u003c\/span\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":53721590628533,"sku":"QBP496566","price":370.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1281225_qbp496566.webp?v=1794118896"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/brand-jl-audio.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}