{"title":"Garmin","description":"","products":[{"product_id":"qbp089066","title":"Garmin GPSMAP 86i Handheld Marine GPS, inReach Satellite Communication, Floating, 3 in Display, IPX7, NMEA 0183 Compatible","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 0100-N2236-00 is a GPSMAP 86i handheld marine GPS with inReach satellite communication for navigation and two-way messaging offshore. It has a 3-inch transflective color display (240 x 400) with button controls, an IPX7 water rating, and a body that floats if it goes overboard.\u003c\/p\u003e\u003cp\u003eFor longer trips, the internal rechargeable lithium-ion battery runs up to 35 hours at 10-minute tracking and up to 200 hours in expedition mode. Mapping starts with a worldwide basemap, with support for optional BlueChart g3 charts. It also syncs with compatible Garmin chartplotters and instruments so you can view real-time boat data on the handheld and use onboard apps, including autopilot control and remote operation of select Fusion marine products.\u003c\/p\u003e\u003cp\u003einReach messaging, SOS, tracking, and inReach Weather require activation and an active satellite subscription, and they work best with a clear view of the sky through the Iridium satellite network.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIPX7 water rating with a housing that floats for retrieval after a drop overboard\u003c\/li\u003e\n\u003cli\u003e3-inch sunlight-readable transflective display (240 x 400) with keypad operation for wet hands and gloves\u003c\/li\u003e\n\u003cli\u003eTwo-way inReach texting and interactive SOS through the global Iridium satellite network (subscription required)\u003c\/li\u003e\n\u003cli\u003eMarine and other forecast requests available through inReach Weather when subscribed\u003c\/li\u003e\n\u003cli\u003eWireless connectivity for syncing boat data with compatible Garmin chartplotters and instruments, plus autopilot app access and remote control of select Fusion products\u003c\/li\u003e\n\u003cli\u003eWi-Fi, Bluetooth, and ANT+ support for updates, smartphone pairing, and sensor connections\u003c\/li\u003e\n\u003cli\u003eUp to 35 hours at 10-minute tracking and up to 200 hours in expedition mode from the internal rechargeable battery\u003c\/li\u003e\n\u003cli\u003e16 GB internal memory and support for a microSD card up to 32 GB for extra storage or preloaded maps\u003c\/li\u003e\n\u003cli\u003eNMEA 0183 sentence output and input over USB for compatible computer mapping; it does not wire directly into onboard NMEA 0183 equipment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eOn the boat, the GPSMAP 86i can mirror key system data from compatible Garmin chartplotters and instruments onto the handheld, which is useful when you are moving around the deck or checking conditions from the cockpit. Autopilot control and Fusion remote functions depend on compatible equipment and the appropriate onboard apps.\u003c\/p\u003e\u003cp\u003eFor syncing routes, waypoints, and tracks, it works with Garmin Explore. Wireless updates and phone notifications use Wi-Fi and Bluetooth, depending on how you connect it.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eYou can run it as a true handheld with the lanyard, or keep it docked in the powered mount for quick grab-and-go navigation. Charging and computer connections use the microUSB port behind the weather cap. For inReach features, plan on a short activation step and test messaging before you rely on it away from shore.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a strong fit for coastal cruisers, anglers, and delivery crews who want a handheld backup navigator that still talks to the rest of the Garmin system. It is also a practical choice for a tender, kayak, or ditch bag because it floats and can keep messaging working when cell coverage drops.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter exposure to saltwater or spray, rinse the unit with fresh water and let it dry fully. Before charging or connecting by USB, make sure the port area and the weather cap are dry to help prevent corrosion. Store it with the cap closed so the connector stays clean between trips.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGPSMAP 86i handheld with worldwide basemap\u003c\/li\u003e\n\u003cli\u003ePowered mount\u003c\/li\u003e\n\u003cli\u003eLanyard\u003c\/li\u003e\n\u003cli\u003eUSB to Micro USB cable\u003c\/li\u003e\n\u003cli\u003eUSB to 2 pin cable\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e0100-N2236-00\u003c\/span\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":53721537970357,"sku":"QBP089066","price":517.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1280492_qbp089066.jpg?v=1794117155"},{"product_id":"qbp389913","title":"JL Audio XMD-PCS30A-1-L12 Single-Amplifier Power Connection Kit, 9 AWG, 12V, 30A MAXI Fuse","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-13400-00 is a 12-volt power and ground wiring kit for a single marine audio amplifier, sized for installs where the amplifier sits within 12 ft (3.7 m) of the battery and up to 30 A.\u003c\/p\u003e\u003cp\u003eIt uses 9 AWG tinned, oxygen-free copper conductors with ABYC-standard color coding, so the positive and negative runs stay easy to identify once everything is routed through rigging tubes and consoles. A 30 A MAXI fuse and fuse holder are included to protect the main feed, along with a separate 16 AWG remote turn-on lead for the amp trigger signal.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFor 12V DC amplifier wiring runs up to 12 ft (3.7 m) from the battery to the amplifier location\u003c\/li\u003e\n\u003cli\u003e9 AWG tinned, oxygen-free copper power and ground conductors for corrosion resistance in wet lockers and salt-air environments\u003c\/li\u003e\n\u003cli\u003e30 A maximum system rating, with a 30 A MAXI fuse and fuse holder included for primary circuit protection\u003c\/li\u003e\n\u003cli\u003eABYC-standard wire colors to keep polarity clear during installation and future troubleshooting\u003c\/li\u003e\n\u003cli\u003eIncludes an 18 ft (5.5 m) 16 AWG remote turn-on wire for typical helm-to-amp routing\u003c\/li\u003e\n\u003cli\u003eMix of pre-terminated ring-end leads and unterminated wire length to fit different battery switch layouts and mounting distances\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the power and ground runs like any other primary DC feed on a boat: keep them supported, protect them from chafe where they pass through bulkheads, and avoid hot spots such as engine compartments and heater ducts unless the wiring is properly shielded and secured. Leave enough service loop at the amplifier so you can pull it for service without stressing the terminals.\u003c\/p\u003e\u003cp\u003eMount the fuse holder on the positive feed as close to the battery connection point as practical, then finish terminations with marine-grade crimping and sealing practices suited for the bilge and console environment. If the boat is on a 24V system, this kit belongs on a properly protected 12V feed used for the audio system.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit matches 12V marine audio installations that stay within the stated distance and current limit. If your amplifier draw is higher than 30 A, or the run to the battery is longer than 12 ft (3.7 m), plan for heavier-gauge conductors and protection sized to the full load and routing distance.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a practical match for center consoles, runabouts, towboats, and pontoons where the amplifier is mounted in a console, helm area, or inboard storage space near the battery compartment. It also suits refits where the existing audio wiring needs to be cleaned up with consistent color coding and proper primary fuse protection.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRed 9 AWG tinned power wire with one power ring, 2 ft (0.6 m)\u003c\/li\u003e\n\u003cli\u003eRed 9 AWG tinned power wire, unterminated, 10 ft (3 m)\u003c\/li\u003e\n\u003cli\u003eYellow 9 AWG tinned ground wire with one power ring, 12 ft (3.7 m)\u003c\/li\u003e\n\u003cli\u003eBlue 16 AWG remote turn-on wire, 18 ft (5.5 m)\u003c\/li\u003e\n\u003cli\u003e30 A MAXI fuse and fuse holder (XD-MFBW-MAXI)\u003c\/li\u003e\n\u003cli\u003eFour 4-inch wire ties\u003c\/li\u003e\n\u003cli\u003e4 mm hex wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e010-13400-00\u003c\/span\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":53721538494645,"sku":"QBP389913","price":181.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1281205_qbp389913.jpg?v=1794117221"},{"product_id":"qbp084965","title":"Garmin GNX 21 Instrument Display, NMEA 2000, 4in Display","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-N1142-10 is a GNX 21 marine instrument display with an inverted 4 inch monochrome LCD (white or color digits on a black background) for showing key boat data at the helm or nav station. It runs on 10 to 32 V and is rated IPX7, with a fully-gasketed polycarbonate case and an anti-glare glass lens for life in the cockpit.\u003c\/p\u003e\u003cp\u003eOn a NMEA 2000 network it can show sensor and system data such as depth, speed, wind, heading, and battery voltage, depending on what is installed on the boat. The screen layout is flexible, with options to show one reading large or split the page into two or three fields, plus graphs on supported pages. An optional NMEA 0183 data cable can be used to bring in data from a single NMEA 0183 talker.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eInverted 4 inch monochrome LCD with maximum digit height up to 36.4 mm for quick reads from a few feet away\u003c\/li\u003e\n\u003cli\u003eSupports single-field, dual-field, and triple-field layouts, plus graph pages for trending data\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 and NMEA 0183 compatible (NMEA 0183 input requires an optional data cable)\u003c\/li\u003e\n\u003cli\u003e10 to 32 V input, with low typical power use (about 0.35 W daytime and 0.4 W at night) and 1.35 W max\u003c\/li\u003e\n\u003cli\u003eIPX7 water resistance with a fully-gasketed polycarbonate housing and anti-glare glass lens\u003c\/li\u003e\n\u003cli\u003eDimensions without sun cover: 110 x 115 x 30 mm (4.33 x 4.53 x 1.18 in.)\u003c\/li\u003e\n\u003cli\u003eCompass-safe distance: 209 mm (8.25 in.) to help plan a clean dash layout\u003c\/li\u003e\n\u003cli\u003eCan share backlight and color settings across NMEA 2000 or NMEA 0183 networks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis display is best thought of as a repeater and organizer for the data already on your boat. What you see depends on the sensors and sources available on your NMEA 2000 backbone or through the connected NMEA 0183 device. If you have Nexus instruments and sensors, data can be brought into the system using a GND 10 bridge (sold separately).\u003c\/p\u003e\u003cp\u003eFor viewing comfort, plan the mounting angle so the screen stays within a reasonable line of sight. For the GNX 21 inverted LCD, mounting at less than a 50 degree viewing angle helps avoid color inversion when you are off to the side.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe unit supports flush or flat mounting on a dash panel. For flush installs, a 90 mm (3.5 in.) hole saw cutout is used, and the mounting surface should be flat so the bezel seats evenly and the case is not stressed when tightened.\u003c\/p\u003e\u003cp\u003eWhen mounting in a wet area, use a proper marine sealant around the gasket line to keep water from finding its way behind the dashboard. Unused connectors should remain capped to protect the contacts from corrosion.\u003c\/p\u003e\u003ch6\u003eElectrical and network integration\u003c\/h6\u003e\u003cp\u003ePower and NMEA 2000 data both come from the NMEA 2000 network connection, so the backbone needs to be wired and terminated correctly. If the network power wiring is unknown or mixed between brands, isolating the NMEA 2000 power feed can help prevent ground and power issues.\u003c\/p\u003e\u003cp\u003eFor battery management, it helps to have the NMEA 2000 network powered through an ignition circuit or an in-line switch instead of leaving the backbone energized at all times.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats that want a dedicated instrument screen that stays readable in bright sun and at night without tying up a chartplotter window. It works well on sailboats where wind and speed pages are always in view, and on powerboats where depth, speed over ground, heading, and battery voltage are the everyday checks.\u003c\/p\u003e\u003cp\u003eWith low typical power draw, it also makes sense for boats that spend time on the hook and still want a clear cockpit readout while running off house batteries.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt spray with fresh water and wipe the lens with a soft cloth to keep the anti-glare surface clean. During seasonal checks, inspect the dash seal and mounting fasteners, especially if the panel sees vibration or frequent washdowns.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e010-N1142-10\u003c\/span\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":53721604554933,"sku":"QBP084965","price":367.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1280488_qbp084965.jpg?v=1794119262"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/collections\/2d486615-c155-5460-82c1-08ecf706ee69.webp?v=1794118131","url":"https:\/\/www.qualityboatparts.com\/collections\/brand-garmin.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}