{"title":"Attwood Marine","description":"","products":[{"product_id":"qbp906682","title":"Attwood Marine Round Vented Gas Deck Fill, Angled, Black Plastic, 1-1\/2 in Fill Hose, 5\/8 in Vent Hose","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 99201GS1 is a vented gas deck fill with a round cap, an angled plastic neck, and hose connections for 1-1\/2 in. fuel fill hose and 5\/8 in. vent hose. It uses a cap made from stainless steel at deck level and an integrated vent arrangement inside the fill body.\u003c\/p\u003e\u003cp\u003eThis part is marked for gasoline service and uses a built-in vent path rather than relying on a separate deck vent fitting. For replacement work, the round cap measures 85 mm, with a 54 mm neck cutout and a 20 mm vent cutout. Installation uses four #8 screws.\u003c\/p\u003e\u003cp\u003eThis version belongs to Attwood's international gasoline deck fill range and is not for U.S. or Canada gasoline applications. That matters when you are matching it to the boat's fuel-system layout and local compliance requirements.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits standard 1-1\/2 in. fuel fill hose and 5\/8 in. vent hose.\u003c\/li\u003e\n\u003cli\u003eAngled neck helps where the hose run below deck does not line up straight under the fill point.\u003c\/li\u003e\n\u003cli\u003eWaterproof screen in the vent path blocks water from entering through the fill while the tank continues to vent.\u003c\/li\u003e\n\u003cli\u003eIntegral vent includes a flame arrestor and anti-surge feature inside the fill assembly.\u003c\/li\u003e\n\u003cli\u003eRound gasoline cap uses the fuel symbol on top and includes a beaded retaining chain and deck plate key.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis deck fill suits boats already rigged for 38 mm fill hose and 16 mm vent hose, especially when the original hardware used a round fill with the vent built into the filler body. It is a practical match for replacement work on runabouts, center consoles, small cruisers, and sailboats that carry gasoline and need an angled hose entry below deck.\u003c\/p\u003e\u003cp\u003eBefore ordering, check the hose sizes, the deck opening, the screw pattern, and the clearance needed for the angled neck and vent connection. On boats with tight access under side decks or coamings, the angled body can make hose routing easier than a straight fill.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBecause the vent is part of the deck fill, the hose layout below deck needs to stay clean and unrestricted. The fill hose should run to the tank without a sharp pinch point, and the vent hose needs enough rise and space to avoid slow fueling or splash-back at the nozzle.\u003c\/p\u003e\u003cp\u003eThe round cap format keeps the top-side footprint familiar for many replacement jobs, while the stainless cap gives you a hard wearing surface at the deck. If you are replacing an older fill, it is worth checking that the cap can open freely and that the retaining chain has room to hang clear when fueling.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e99201GS1\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721526862005,"sku":"QBP906682","price":38.61,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1322205_qbp906682.webp?v=1794116280"},{"product_id":"qbp262818","title":"Attwood Marine Boat Cover Support Pole, 28-48 in, Anodized Aluminum","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 10704-5 is an adjustable boat cover support pole that raises the center of the cover so water can run off instead of pooling. It telescopes from 28 to 48 inches, uses a 1 inch diameter anodized aluminum pole, and locks at the chosen height with a twist.\u003c\/p\u003e\u003cp\u003eRubber tips at both ends help it sit against the cover and the deck or sole without creating a hard contact point. This is the kind of support pole commonly used under a mooring or storage cover when you need extra lift in the cockpit or another low spot where rainwater tends to collect.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAdjusts from 28 to 48 inches to match the gap between the boat and the cover at the support point\u003c\/li\u003e\n\u003cli\u003e1 inch diameter anodized aluminum pole for a lighter setup that holds up well in a damp marine environment\u003c\/li\u003e\n\u003cli\u003eTwist-lock telescoping adjustment for quick height changes without tools\u003c\/li\u003e\n\u003cli\u003eRubber tips at both ends to reduce chafe and avoid hard contact against the cover or deck surface\u003c\/li\u003e\n\u003cli\u003e3-in-1 tip setup so the same pole can work with different cover attachment styles\u003c\/li\u003e\n\u003cli\u003eRaises the cover center to help water drain off and reduce sagging from standing rainwater\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit comes down to two checks: the vertical distance from the support surface to the underside of the cover, and the way your cover accepts a center support pole. This pole works where that height falls within the 28 to 48 inch adjustment range.\u003c\/p\u003e\u003cp\u003eThe interchangeable tip setup is useful when replacing an older support pole or when your cover uses a reinforced center point with a specific attachment style. For the cleanest fit, check the support location on the cover before ordering and confirm that a center support pole is part of your cover setup.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis pole makes the most sense for boats that stay covered at the dock, on the trailer, or in offseason storage. It is a practical replacement for a missing support pole and a straightforward way to add lift under a cover that sags in one spot.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAdjustable support pole\u003c\/li\u003e\n\u003cli\u003eRubber cap\u003c\/li\u003e\n\u003cli\u003eGrommet tip\u003c\/li\u003e\n\u003cli\u003eMale canvas snap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e10704-5\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721528860853,"sku":"QBP262818","price":23.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1096203_qbp262818jpg.jpg?v=1794116534"},{"product_id":"qbp906722","title":"Attwood Marine Plastic Waste Deck Fill, For 38mm Hose, Scalloped Stainless Steel Cap","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 99202WS1 is a waste deck fill with a plastic neck and a stainless steel cap for boats that use a 38 mm sanitation hose. It is a non-vented fitting, uses a 54 mm deck cutout, and has an 85 mm cap diameter, so the key fit checks are hose size, deck opening, and the flange footprint on the surface of the deck.\u003c\/p\u003e\u003cp\u003eThis fitting is for waste service, not fuel or freshwater, and the cap is marked accordingly to help keep deck fills clearly identified. That matters on boats with more than one fill point, especially when fuel, water, and sanitation access points are grouped in the same area.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWaste deck fill for sanitation pump-out systems.\u003c\/li\u003e\n\u003cli\u003e38 mm hose connection size for matching existing waste hose runs.\u003c\/li\u003e\n\u003cli\u003e54 mm deck cutout requirement for replacement planning or new installation.\u003c\/li\u003e\n\u003cli\u003e85 mm cap diameter for checking flange coverage at the deck surface.\u003c\/li\u003e\n\u003cli\u003ePlastic neck with a stainless steel cap.\u003c\/li\u003e\n\u003cli\u003eNon-vented body for systems where tank venting is handled through a separate vent line.\u003c\/li\u003e\n\u003cli\u003eWaste marking on the cap helps avoid confusion with fuel or water fills.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eOn a replacement job, the practical checks are straightforward: confirm the hose is 38 mm, measure the existing deck opening, and make sure the 85 mm cap will sit cleanly over the area on deck. It also helps to check clearance below the mounting point so the hose can run without a sharp bend right under the fitting.\u003c\/p\u003e\u003cp\u003eThis is a good match for cruisers, fishing boats, and sailboats with an onboard head and holding tank where you need a clearly marked waste pump-out point on deck. If your boat already has a separate tank vent and you are matching a non-vented waste fill in this size, this fitting lines up with that type of setup.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e99202WS1\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721529122997,"sku":"QBP906722","price":66.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1322207_qbp906722.webp?v=1794116576"},{"product_id":"qbp921113","title":"Attwood Marine Shower Sump System, Multi-Port, 750 GPH, 12V, Packard Connector","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 4143PF1 is a 12V shower sump system with a multi-port box and Packard connector for moving gray water from a shower pan or sink drain to a 3\/4 inch discharge line. It is the 750 GPH version in Attwood's larger sump box format, which makes it a practical fit when one box needs to manage more than a single drain.\u003c\/p\u003e\u003cp\u003eThe box measures 13 inches long, 7-3\/8 inches wide, and 4-7\/16 inches high. It accepts 3\/4 inch, 1 inch, 1-1\/8 inch, and 1-1\/2 inch inlet hose sizes, and the outlet is sized for 3\/4 inch I.D. hose. That helps when a boat uses different drain hose sizes between a shower stall, head sink, and galley sink.\u003c\/p\u003e\u003cp\u003eThe top lifts off for filter access, the lid gasket helps keep the box sealed at the top, and the built-in air vent helps reduce the air-lock problems that can interrupt sump discharge underway or at the dock.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12V shower sump system with Packard connector\u003c\/li\u003e\n\u003cli\u003e750 GPH multi-port sump in the larger box size\u003c\/li\u003e\n\u003cli\u003e3\/4 inch I.D. outlet connection\u003c\/li\u003e\n\u003cli\u003eInlet options for 3\/4 inch, 1 inch, 1-1\/8 inch, and 1-1\/2 inch hose\u003c\/li\u003e\n\u003cli\u003eMulti-port layout for tying in more than one drain\u003c\/li\u003e\n\u003cli\u003eAir vent built into the box to help prevent air lock\u003c\/li\u003e\n\u003cli\u003eSnap-off lid with removable filter access for routine cleaning\u003c\/li\u003e\n\u003cli\u003eBox size of 13 inches x 7-3\/8 inches x 4-7\/16 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis sump needs to sit lower than the shower drain and any other drain lines feeding it. For steady pump-out, the outlet hose should rise continuously from the box to the thru-hull without low spots, and the inlet hoses should rise smoothly from the sump toward their drains. Those routing details matter on boats where hose runs have to pass around stringers, tankage, or liners.\u003c\/p\u003e\u003cp\u003eThe larger box footprint is worth checking before replacement on compact bilge or utility spaces. Leave enough side access to release the lid tabs and enough clearance above the box to remove the cover and clean the filter without having to pull the whole unit back out.\u003c\/p\u003e\u003ch6\u003eElectrical and system fit\u003c\/h6\u003e\u003cp\u003eThis version is for 12V DC systems only. The Packard connector is one of the main fit points to confirm before ordering, especially when replacing an existing shower sump on a production boat where the factory harness is already terminated for that plug style.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis layout makes sense for cruisers, express boats, and small yachts where one serviceable sump box is used to collect shower water and secondary sink drains in the same part of the hull. It is also a sensible match when easy filter access matters because the box will need periodic cleaning from hair, soap residue, and everyday gray-water debris.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e4143PF1\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721529614517,"sku":"QBP921113","price":153.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1322197_qbp921113.webp?v=1794116687"},{"product_id":"qbp199942","title":"Attwood Marine Locking Collar, For All-Round Lights, Non-Threaded","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 912818 is a non-threaded locking collar for compatible Attwood all-round lights. It is a small replacement part, but it matters when the light pole needs to seat and lock the way it should instead of working loose in normal boat use.\u003c\/p\u003e\u003cp\u003eThis collar is black and made for the non-threaded style used on certain Attwood light assemblies. It fits best when you are repairing an existing navigation light setup and need the correct collar rather than a complete light or base.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement locking collar for compatible Attwood all-round light assemblies\u003c\/li\u003e\n\u003cli\u003eNon-threaded design for setups that use this collar style\u003c\/li\u003e\n\u003cli\u003eBlack finish that blends in with common navigation light hardware\u003c\/li\u003e\n\u003cli\u003eUseful when the original collar is worn, missing, or no longer holds the light assembly as securely as it should\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit is the main thing to check with this part. This collar is for the non-threaded version, so it should be matched to an existing Attwood all-round light setup that uses the same style. If your current assembly uses a threaded collar or a different base arrangement, this is not the correct replacement.\u003c\/p\u003e\u003cp\u003eThis kind of service part is most useful on boats where the all-round light is removed for storage, handled often, or exposed to vibration underway. Replacing a worn collar can help restore a more secure hold at the light connection point.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward when it is being fitted to the matching light assembly. Compare the old collar to the replacement before install, then check that the light pole locks in cleanly without forcing parts together. Because this is a collar only, it is intended as a replacement part within an existing navigation light setup.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e912818\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721535709365,"sku":"QBP199942","price":2.67,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1322053_qbp199942.jpg?v=1794116941"},{"product_id":"qbp225697","title":"Attwood Marine Navigation Light Pole Knob, for Fold-Down Pole Lights, Plastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 001003167 is a replacement knob for Attwood fold-down pole lights. It is a single service part for repairs where the light assembly is still in place and only the original knob is missing, worn, or no longer holding the base hardware properly.\u003c\/p\u003e\u003cp\u003eThis piece is used at the fold-down light base, so it makes sense when you want to restore the original hardware without replacing the full pole or light. It is the knob only, and the spring washer used with this assembly is a separate part, 001003166.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement knob for Attwood fold-down pole light hardware\u003c\/li\u003e\n\u003cli\u003eSingle service part, not a complete light, pole, or base assembly\u003c\/li\u003e\n\u003cli\u003eUseful when the original knob is lost, stripped, or no longer secures the folding light hardware as intended\u003c\/li\u003e\n\u003cli\u003eMatches the 001003167 replacement part reference for existing Attwood setups\u003c\/li\u003e\n\u003cli\u003eKnob-only package, with spring washer 001003166 sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis part is meant for Attwood fold-down pole lights and makes the most sense as a like-for-like replacement on an existing Attwood installation. It is not a complete navigation light and it is not a general replacement for unrelated light bases.\u003c\/p\u003e\u003cp\u003eOn a boat where the pole, base, and wiring are still serviceable, replacing the knob can be a straightforward way to get the fold-down light hardware working normally again. It is a sensible repair for owners dealing with a missing knob after storage, trailering, or repeated seasonal removal of the light pole.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is simple when the surrounding base hardware is still in good condition. Remove the damaged knob, inspect the mating hardware at the base, and refit the replacement on the existing fold-down light assembly.\u003c\/p\u003e\u003cp\u003eBecause this part sits on hardware that is handled regularly and exposed to vibration, it is worth checking that the spring washer is still present and in usable condition. That matters on boats where the light is folded down often for trailering, covers, or storage.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eOne replacement knob\u003c\/li\u003e\u003c\/ul\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e001003167\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721536266421,"sku":"QBP225697","price":5.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1322079_qbp225697.webp?v=1794117002"},{"product_id":"qbp436073","title":"Attwood Marine Round Interior\/Exterior Light, 2.75 in, 12V, White Bezel, Blue LED","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 6323W7 is a 2.75 inch round LED courtesy light with a white plastic bezel, blue output, 12 VDC operation, and a 1.8 W draw. It is built for interior or exterior mounting, with fully potted electronics, a stainless steel housing, and a rated service life of 50,000+ hours.\u003c\/p\u003e\u003cp\u003eThis light fits the kind of onboard spots where you want low-level illumination without the heat and power draw of older halogen fixtures. Blue output works well around cockpit seating, helm footwells, cabin entry points, companionway steps, and other walk-through areas where night visibility matters but harsh white light is not wanted.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2.75 inch round courtesy light for interior or exterior mounting\u003c\/li\u003e\n\u003cli\u003eBlue LED output with a white plastic bezel for a clean finished look\u003c\/li\u003e\n\u003cli\u003e12 VDC light with a 1.8 W draw for low current demand on house lighting circuits\u003c\/li\u003e\n\u003cli\u003eFully potted electronics and stainless steel housing for use in exposed marine locations\u003c\/li\u003e\n\u003cli\u003eRuns cooler than comparable halogen lights and helps reduce burn risk in tight spaces\u003c\/li\u003e\n\u003cli\u003eRated for 50,000+ hours of service life\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis model is a straightforward match for boats already using a 12-volt courtesy lighting circuit. The round format suits common retrofit and new-install positions in cabins, cockpits, under-gunwale areas, and deck transitions where a compact light is easier to place.\u003c\/p\u003e\u003cp\u003eBecause it is intended for interior and exterior mounting, it makes sense in areas that may see spray, washdowns, or constant vibration. Before ordering, confirm that your boat uses 12 VDC for this circuit and check the mounting location for the right face size, depth, and wire access.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis light is a practical fit for owners replacing older halogen courtesy lights and looking for lower heat and lower power draw without giving up useful output. It also suits new builds and refits where blue courtesy lighting is being added for step lighting, accent lighting, or safer movement through the boat after dark.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e6323W7\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721536299189,"sku":"QBP436073","price":38.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1106039_qbp436073jpg.jpg?v=1794117017"},{"product_id":"qbp250773","title":"Attwood Marine Trailer Roller Offset Panel Brackets, 8 in, Zinc-Plated Steel, 2pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 11260-1 is a pair of 8 inch offset panel brackets for trailer roller mounting and adjustment. This is trailer hardware rather than onboard hatch hardware, and it is used where a roller needs offset placement and some adjustment during setup.\u003c\/p\u003e\u003cp\u003eThe brackets are zinc-plated steel and use a slotted design to help line up the roller assembly with the hull as the boat loads, centers, and supports on the trailer. The 8 inch length and 5\/8 inch hole size are the key fit points to check against your current trailer hardware before ordering.\u003c\/p\u003e\u003cp\u003eThis part makes sense for trailer repairs, roller replacement, or correcting roller position on bunk and roller trailers where the existing bracket is bent, worn, or no longer lines up cleanly with the boat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePair of 8 inch offset panel brackets for trailer roller mounting\u003c\/li\u003e\n\u003cli\u003eSlotted bracket shape allows position adjustment during trailer setup\u003c\/li\u003e\n\u003cli\u003eZinc-plated steel construction for common marine trailer hardware use\u003c\/li\u003e\n\u003cli\u003e5\/8 inch hole size to match the related roller mounting hardware\u003c\/li\u003e\n\u003cli\u003eUseful when replacing worn brackets or correcting roller alignment on the trailer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eCheck the bracket length, hole size, and the offset needed at your roller location before installation. These brackets are used as part of the trailer roller assembly, so fit depends on the existing roller, shaft hardware, and the mounting panel or support where the bracket bolts in place.\u003c\/p\u003e\u003cp\u003eFor trailers that see frequent launch ramp use, rinse the hardware after saltwater exposure and inspect the roller assembly during routine trailer service. That matters most where vibration, road spray, and repeated loading can loosen or wear trailer components over time.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eTwo offset panel brackets\u003c\/li\u003e\u003c\/ul\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e11260-1\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721537183925,"sku":"QBP250773","price":17.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1322114_qbp250773.webp?v=1794117099"},{"product_id":"qbp398552","title":"Attwood Marine Sahara S500 Automatic Bilge Pump, 12V, 500 GPH, 3\/4 in Outlet","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 4505-7 is an automatic 12V Sahara S500 bilge pump rated at 500 GPH at open flow and 350 GPH at 3.3 feet of head, with a 3\/4 inch discharge outlet. It combines the pump and automatic switch in one body, which keeps installation simpler in tight bilge spaces and avoids the extra footprint of a separate float switch.\u003c\/p\u003e\u003cp\u003eThis is a practical fit for boats that need unattended bilge water removal while sitting at the dock, on a mooring, or between trips. It is meant to clear standing bilge water, not fuel, oil, or fast flooding from hull damage or heavy weather.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAutomatic pump with an integrated mercury-free switch, so the unit can cycle on when water rises without a separate float switch.\u003c\/li\u003e\n\u003cli\u003e12V output rated at 500 GPH at open flow and 350 GPH at 3.3 feet of head, which gives a clearer picture of installed performance.\u003c\/li\u003e\n\u003cli\u003eFits a 3\/4 inch I.D. discharge hose, which matters when matching an existing hose run or thru-hull size.\u003c\/li\u003e\n\u003cli\u003eUses 16-gauge tinned copper leads and calls for a 2 amp fuse, which helps when planning the wiring run and switch panel connection.\u003c\/li\u003e\n\u003cli\u003ePermanent-magnet motor, stainless steel shaft, steel-reinforced seal, and a strainer base that can be removed for cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the pump in the lowest flat part of the bilge with the outlet pointing toward the transom and the discharge nozzle kept level. The hose should rise steadily to the thru-hull without dips, since trapped water or air in the line can cause airlock and cut pumping performance.\u003c\/p\u003e\u003cp\u003eThe pump body is sealed and submersible, but the wire connections should stay out of the water and be sealed properly. For a standard helm-controlled circuit, install it with an inline fuse and an AUTO\/OFF\/MANUAL switch.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis pump makes sense on 12V boats already set up for a 3\/4 inch bilge discharge hose, especially where space is limited and a combined pump-and-switch layout is easier to place. It also works well as a secondary automatic pump in a stepped bilge, fish box sump, or other low point where you want backup water removal without adding another float switch.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eIt suits owners who want a simple automatic bilge pump for runabouts, small center consoles, aluminum fishing boats, and sailboats with a modest bilge area. On larger boats, it is more often used as a secondary pump or for a smaller compartment rather than the main high-capacity bilge circuit.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e4505-7\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721546064053,"sku":"QBP398552","price":94.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1322147_qbp398552.webp?v=1794117769"},{"product_id":"qbp199853","title":"Attwood Marine Replacement Transom Shower Hose, For 4131\/4133, 7 ft","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 911420 is a replacement transom shower hose for Attwood shower systems. It is sold as the HOSE-7' service part and is used with Attwood shower setups including the 4131 and 4133 systems.\u003c\/p\u003e\u003cp\u003eThis is the part you replace when the original shower hose has become stiff, cracked, kinked, or starts leaking, but the rest of the shower assembly is still worth keeping in service. On a boat with a built-in cockpit or transom rinse station, that kind of repair is often the quickest way to get the shower working normally again without changing the whole box, sprayer, and controls.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement hose for Attwood transom and aft-deck shower systems\u003c\/li\u003e\n\u003cli\u003eListed as the HOSE-7' service part\u003c\/li\u003e\n\u003cli\u003eFits Attwood shower systems including 4131 and 4133\u003c\/li\u003e\n\u003cli\u003eMade for freshwater shower setups used at the transom or under the gunwale\u003c\/li\u003e\n\u003cli\u003eUseful when the original hose is worn but the shower box, sprayer, and controls remain serviceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis hose is meant as a service replacement, not as a complete shower kit. It suits boats that already have an Attwood shower assembly installed and need the hose section replaced to restore normal pull-out reach and water delivery.\u003c\/p\u003e\u003cp\u003eBefore ordering, compare your current hose routing and attachment points with the existing shower assembly on board. This is a good match for owners servicing an Attwood rinse station used after swimming, boarding, or cleaning off salt and sand at the stern.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eReplacement is most straightforward when the shower box and sprayer are already in place and only the hose needs attention. Route the new hose through the existing compartment with enough slack for smooth pull-out use, avoid tight bends that can pinch flow, and check the system under pressure before closing the access area back up.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e911420\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721556582581,"sku":"QBP199853","price":33.42,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1322052_qbp199853.jpg?v=1794118111"},{"product_id":"qbp927697","title":"Attwood Marine Vertical Mount Sidelight Pair, 2-Mile, 12V, Stainless Steel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 3838-1 is a 12-volt stainless steel vertical sidelight pair for the bow, with red and green lenses, 2 nautical mile visibility, and fit for boats up to 20 meters (65.6 ft.).\u003c\/p\u003e\u003cp\u003eIt mounts on a horizontal deck or gunwale surface, with the red light on port and the green light on starboard. Each light covers 112.5 degrees for the required 225-degree combined sidelighting arc, and the gasketed base helps seal the installation against water at the mounting surface.\u003c\/p\u003e\u003cp\u003eThis setup suits owners replacing a conventional incandescent sidelight pair or rigging a 12-volt boat that still uses serviceable festoon lamps and separate port and starboard lights.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12-volt DC vertical sidelight pair with separate red port and green starboard lights\u003c\/li\u003e\n\u003cli\u003e2 nautical mile visibility for boats up to 20 meters, or 65.6 ft.\u003c\/li\u003e\n\u003cli\u003e112.5 degree visibility from each light for a 225 degree combined sidelighting arc\u003c\/li\u003e\n\u003cli\u003eStainless steel construction with a gasketed base for a water-resistant mounting surface seal\u003c\/li\u003e\n\u003cli\u003eUses 8-watt festoon lamps\u003c\/li\u003e\n\u003cli\u003eMeets USCG CFR 183.810 and ABYC A-16 requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis light set belongs on the bow where both fixtures can sit the same distance from the stem and shine straight ahead. It needs a clear line of sight with no rail bases, cleats, anchors, or other hardware blocking the side arc.\u003c\/p\u003e\u003cp\u003eElectrical fit is 12-volt DC only, so it matches boats with a standard 12-volt navigation light circuit.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMounting uses a 3\/8 in. wire access hole and three #6 pan head stainless tapping screws. The wiring layout calls for 16-gauge wire, waterproof crimp connectors, marine non-silicone sealant, and a 1-amp fuse on the positive feed.\u003c\/p\u003e\u003cp\u003eThe outer cover and lens can be removed for installation and lamp service, which makes routine bulb replacement more straightforward when access is tight at the bow.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e3838-1\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721562382517,"sku":"QBP927697","price":102.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1322210_qbp927697.webp?v=1794118231"},{"product_id":"qbp743963","title":"Attwood Marine Snap-Lock Seat Mount, For 1.77 in Posts, 3 Degree Tilt, E-Coated Steel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine SP-19000 is a Snap-Lock seat mount for 1.77 in. pedestal systems that use a 1-3\/4 in. D post. It has a 3 degree tilt and an E-coated steel body, which makes it a straightforward replacement or new-install part when you need the seat to lock onto the pedestal instead of lifting free.\u003c\/p\u003e\u003cp\u003eThis mount sits at the seat end of a compatible pedestal setup and is built for the Attwood Snap-Lock 1.77 seating system. That lock-up is useful on boats where the seat sees spray, vibration, and frequent movement around the cockpit or helm.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits Snap-Lock 1.77 pedestal systems that use a 1-3\/4 in. D post\u003c\/li\u003e\n\u003cli\u003eBuilt-in 3 degree tilt at the seat mount\u003c\/li\u003e\n\u003cli\u003eSnap-Lock connection holds the mount onto the post for a more secure seat attachment underway\u003c\/li\u003e\n\u003cli\u003eE-coated steel construction helps resist corrosion in wet marine use\u003c\/li\u003e\n\u003cli\u003eBlack finish works with common pedestal and seat hardware layouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCheck the pedestal size before ordering. This mount is for the 1.77 in. Snap-Lock family and a 1-3\/4 in. D post, so it should be matched to that seating setup rather than treated as a universal seat mount. On a replacement job, compare the post shape, diameter, and locking style at the top of the pedestal.\u003c\/p\u003e\u003cp\u003eIt is a good match for helm, passenger, or fishing-seat positions that use removable pedestal seating and need the seat mount to stay positively engaged with the post.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe SP-19000 is used when mounting the seat onto the top of a compatible pedestal. The 3 degree tilt gives the seat a slight rear angle, which can feel more natural at the helm or in a leaning position. Once installed, make sure the mount is fully snapped and locked onto the post before running the boat or trailering.\u003c\/p\u003e\u003cp\u003eOn boats that stay outside or get frequent washdowns, rinsing salt residue off the seating hardware and checking fastener tightness as part of normal maintenance will help keep the finish in better shape and the locking action working as it should.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis seat mount makes sense on fishing boats, ski boats, and family runabouts that already use the Snap-Lock 1.77 pedestal platform. It is especially useful where seats are removed, reinstalled, or repositioned through the season and still need a locked connection once back in place.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eSP-19000\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721566871733,"sku":"QBP743963","price":61.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1322190_qbp743963.jpg?v=1794118378"},{"product_id":"qbp836464","title":"Attwood Marine Aluminum Canoe Paddle, Black Blade, Ergonomic Grip","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine Ergonomic Aluminum Canoe Paddle is a hand paddle for small boats, canoes, dinghies, tenders, and emergency use on board. It pairs an aluminum shaft with a black plastic blade, so it is easy to keep aboard without adding unnecessary weight to a compact craft.\u003c\/p\u003e\u003cp\u003eThe range is available in 4 ft. and 5 ft. lengths, giving boaters a simple way to match paddle reach to the beam of the boat, the seating position, and the amount of storage space available. An ergonomic palm grip at the top helps with control during repeated strokes, while the protective shaft grip gives the lower hand a more comfortable hold.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAluminum shaft with plastic blade construction for practical use in canoes, tenders, and small craft.\u003c\/li\u003e\n\u003cli\u003eAvailable in 4 ft. and 5 ft. lengths to suit different seating positions and storage spaces.\u003c\/li\u003e\n\u003cli\u003eErgonomic palm grip at the top helps the hand stay comfortable during regular paddling.\u003c\/li\u003e\n\u003cli\u003eProtective shaft grip gives the lower hand a secure contact point while steering or maneuvering close to docks, ramps, or shorelines.\u003c\/li\u003e\n\u003cli\u003eBlack blade and grip finish keeps the look simple and easy to match with common small-boat gear.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis paddle is offered in two length configurations, with the length being the key difference between the variants.\u003c\/p\u003e\u003cp\u003eThe aluminum and plastic construction, ergonomic top grip, and protective shaft grip are consistent across the available lengths.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e11764-1: Length 4 ft. This shorter version is easier to stow in smaller canoes, tenders, and onboard compartments where space is limited.\u003c\/li\u003e\n\u003cli\u003e11765-1: Length 5 ft. This longer version adds reach for wider seating positions or for boaters who prefer a longer stroke from the cockpit or center seat.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis paddle makes sense as a primary paddle for a canoe or as a backup hand-propulsion option on a small boat, tender, or dinghy. It is useful around docks, ramps, moorings, and quiet-water areas where quick manual control matters more than electronics or engine power.\u003c\/p\u003e\u003ch6\u003eFit and storage notes\u003c\/h6\u003e\u003cp\u003eBefore ordering, check the available storage length on the boat and consider the paddling position. The 4 ft. option is easier to store in compact spaces, while the 5 ft. option gives more reach when paddling from a wider or higher seating position.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e11764-1\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e11765-1\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"4 ft.","offer_id":53721570246837,"sku":"QBP836464-V1","price":23.24,"currency_code":"USD","in_stock":false},{"title":"5 ft.","offer_id":53721570279605,"sku":"QBP836464-V2","price":27.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1327744_qbp836464.jpg?v=1794118488"},{"product_id":"qbp301101","title":"Attwood Marine 238 Series Fixed Height Bell Seat Pedestal, 2-3\/8 in Tube, Hard-Anodized Aluminum","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 238 Series is a fixed-height 2-3\/8 inch bell pedestal range for boat seating installations that need a solid deck-mounted base without an adjustable height mechanism. These pedestals use a hard-anodized aluminum tube on a 9 inch round aluminum base, with height options of 8 inches, 11 inches, and 12 inches in this listing. Each listed height is measured from the deck to the top of the seat mount.\u003c\/p\u003e\u003cp\u003eThis series is used for helm, cockpit, and fishing seating where a set seating position is preferred. The AO rating supports Type A\/Operator use, so it can be used in helm or driver seating applications when installed with compatible 238 Series seating hardware and suitable deck reinforcement.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFixed-height 2-3\/8 inch bell pedestal format for Attwood and Swivl-Eze 238 Series seating systems.\u003c\/li\u003e\n\u003cli\u003e9 inch round aluminum base with a hard-anodized aluminum pedestal tube for wet cockpit and deck installations.\u003c\/li\u003e\n\u003cli\u003eABYC AO classification for Type A\/Operator seating, including helm or driver positions.\u003c\/li\u003e\n\u003cli\u003eBase surface is bead-blasted to close aluminum porosity, then clear coated to help resist scuffing and corrosion.\u003c\/li\u003e\n\u003cli\u003eStainless steel spring components reduce corrosion risk inside the seating hardware.\u003c\/li\u003e\n\u003cli\u003eHeight is measured from the deck to the top of the seat mount, which helps when matching an existing seating position.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple fixed-height configurations for different helm, cockpit, and fishing-seat layouts.\u003c\/p\u003e\u003cp\u003eThe variable attribute in this listing is pedestal height. The 2-3\/8 inch 238 Series format, hard-anodized aluminum tube, 9 inch round base, and AO classification remain consistent across these three variants.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e238908-1: Height 8 inches. This lower fixed pedestal keeps the seat closer to the deck, which can suit cockpit layouts where overhead clearance, console reach, or a lower seating position matters.\u003c\/li\u003e\n\u003cli\u003e238911-1: Height 11 inches. This height gives a moderate seat rise for helm or fishing seating without adding an adjustable pedestal mechanism.\u003c\/li\u003e\n\u003cli\u003e238912-1: Height 12 inches. This configuration adds one more inch over the 11 inch version for setups where sightline over the console or deck fit benefits from the extra height.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and installation\u003c\/h6\u003e\u003cp\u003eThe 238 Series is a matched seating hardware system, and these pedestals should be paired with compatible Attwood or Swivl-Eze 238 Series seat mounts and related components. Mixing with other manufacturers' pedestal parts is not recommended because fit, locking action, and seating rating depend on the matching post, mount, and base geometry.\u003c\/p\u003e\u003cp\u003eBefore drilling, confirm seat height at the helm or fishing position, check clearance for the seat shell and arm movement, and verify that the deck has enough backing structure for the loads created by passengers, turns, and rough water. Use fasteners and bedding materials appropriate for the deck material and exposure on the boat.\u003c\/p\u003e\u003ch6\u003eMaterials and corrosion resistance\u003c\/h6\u003e\u003cp\u003eThe pedestal tube is hard-anodized aluminum, and the base surface is bead-blasted and clear coated. That combination is useful in wet cockpit and fishing-boat areas where spray, sunscreen, fish residue, and regular cleaning can be tough on unfinished aluminum.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis range is a practical match for anglers, center-console owners, and runabout owners replacing a fixed pedestal within the same 238 Series system. The shorter 8 inch version keeps seating low, while the 11 inch and 12 inch versions help raise the seating position for visibility at the console or comfort at a casting deck.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e238912-1\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e238911-1\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e238908-1\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"12\"","offer_id":53721577357493,"sku":"QBP301101-V3","price":102.18,"currency_code":"USD","in_stock":false},{"title":"11\"","offer_id":53721577390261,"sku":"QBP301101-V2","price":99.63,"currency_code":"USD","in_stock":false},{"title":"8\"","offer_id":53721577423029,"sku":"QBP301101-V1","price":67.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1327556_qbp301101.jpg?v=1794118721"},{"product_id":"qbp356090","title":"Attwood Marine Sahara-Powered Shower Sump System, 500 GPH, 12V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 4141-1 is a 12V shower sump system with a 500 GPH automatic pump for moving gray water from a shower pan and other onboard drains. It uses a standard-size sump box, a 3\/4-inch I.D. outlet, and 36-inch wire leads, which makes it a practical fit for many small to mid-size boat plumbing layouts.\u003c\/p\u003e\u003cp\u003eThis sump is built for installations where shower water needs to be collected, filtered, and discharged reliably instead of draining straight into the bilge. Multiple inlets can be connected to more than one drain with different hose sizes, so it works well when the shower shares the sump with nearby sink or compartment drains.\u003c\/p\u003e\u003cp\u003eThe box has a clear top for quick filter checks, a gasketed lid to help contain overflow, and an air vent to reduce the chance of air lock. It also meets applicable ABYC and USCG standards, which matters when you are matching replacement plumbing parts to an existing system on board.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e500 GPH shower sump system for 12V DC boats\u003c\/li\u003e\n\u003cli\u003e3\/4-inch I.D. outlet hose connection with a 3-amp fuse specification\u003c\/li\u003e\n\u003cli\u003eMultiple inlet positions for tying in more than one gray-water drain\u003c\/li\u003e\n\u003cli\u003eClear lid makes it easy to inspect the filter without opening the box\u003c\/li\u003e\n\u003cli\u003eGasketed snap-on lid helps contain overflow and simplifies filter access for cleaning\u003c\/li\u003e\n\u003cli\u003eAir vent is built into the box to help prevent air lock in the discharge line\u003c\/li\u003e\n\u003cli\u003e36-inch wire leads give some flexibility when routing power to the unit\u003c\/li\u003e\n\u003cli\u003eStandard-size sump box suits installations where space is tighter than a large-box setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis unit needs to be mounted lower than the shower drain and other connected drains, and the box should sit level so the automatic pump can work as intended. The discharge hose should rise smoothly from the sump to the thru-hull without dips, because low spots in the hose can trap air and reduce pump performance.\u003c\/p\u003e\u003cp\u003eFor boats with more than one gray-water source, the inlet layout gives some flexibility when routing hoses into the box. The lid removes for service, so it is worth leaving enough clearance around the sump to open the top and clean the filter without pulling the whole unit back out.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis sump is a good match for 12V boats that need a compact gray-water collection point for a shower or a shower shared with one or more nearby drains. It fits best where the plumbing run can keep the outlet hose rising toward the discharge point and where routine access to the filter is still possible after installation.\u003c\/p\u003e\u003cp\u003eFor owners replacing an older sump box, the details that matter most are system voltage, outlet hose size, available mounting space, and whether a standard-size box matches the footprint already in the boat. Checking those points before ordering usually tells you very quickly whether this is the right replacement.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eThe filter should be checked and cleaned as part of normal onboard plumbing maintenance, especially on boats that see frequent shower use or pick up hair, soap residue, and other debris in the drain line. The clear lid helps with quick inspections, which makes it easier to catch buildup before it slows the pump or causes the sump to cycle more often than it should.\u003c\/p\u003e\u003cp\u003eIf the boat is laid up in cold weather, the sump and connected hoses should be drained as part of winterization. Keeping the box clean and the hoses clear will do more for long-term performance than any extra add-ons.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e4141-1\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721582370997,"sku":"QBP356090","price":231.42,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1322140_qbp356090.jpg?v=1794118799"},{"product_id":"qbp026560","title":"Attwood Marine Keel Roller Bracket, For 5\/8 in Roller Shaft","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Attwood Marine keel mounting bracket is a one-piece roller bracket for boat trailers that need a secure keel roller support with vertical adjustment. It works with a 5\/8 inch roller shaft, mounts with a 1\/2 inch bolt, and uses a 5 inch slot so the roller height can be set to match the boat's keel line and trailer geometry.\u003c\/p\u003e\u003cp\u003eThis bracket range is useful when replacing a worn keel roller bracket, rebuilding a trailer support point, or setting up a roller position for smoother launching and retrieval. Match the size and slot-center measurement to the trailer crossmember, existing roller shaft, and keel roller location before installation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOne-piece roller bracket construction for keel roller support on boat trailers.\u003c\/li\u003e\n\u003cli\u003e5 inch vertical adjustment slot helps set the roller height against the hull's keel line.\u003c\/li\u003e\n\u003cli\u003eAccepts a 5\/8 inch roller shaft for standard keel roller setups.\u003c\/li\u003e\n\u003cli\u003eMounts with a 1\/2 inch bolt, so the bracket can be fitted to a suitable trailer crossmember or mounting point.\u003c\/li\u003e\n\u003cli\u003eAvailable in 5 inch, 10 inch, and 12 inch bracket sizes to match different trailer layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine keel mounting bracket is offered in three configurations. The bracket size and slot-center measurement vary, while the 5 inch vertical adjustment slot, 1\/2 inch mounting bolt requirement, and 5\/8 inch roller shaft fitment remain consistent across the range.\u003c\/p\u003e\u003cp\u003eUse the slot-center measurement to compare against the trailer's existing bracket position or planned roller location.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e11370-1: 5 inch bracket with 2-3\/4 inch slot center. This shorter bracket fits compact keel roller positions where the roller sits closer to the mounting point.\u003c\/li\u003e\n\u003cli\u003e11371-1: 10 inch bracket with 8-3\/16 inch slot center. This mid-length version gives more reach for trailer setups that place the keel roller farther from the crossmember.\u003c\/li\u003e\n\u003cli\u003e11372-1: 12 inch bracket with 10-1\/8 inch slot center. This longer version supports layouts that need additional spacing between the mounting point and roller location.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore fitting the bracket, confirm the roller shaft diameter, bracket size, slot-center measurement, and available mounting surface on the trailer. The 5 inch slot allows vertical adjustment, which is important for keeping the roller aligned with the keel rather than letting the hull load unevenly on one side of the trailer.\u003c\/p\u003e\u003cp\u003eAfter installation, check that the roller turns freely on the shaft and that the bracket is tightened securely before launching or towing. Recheck the hardware after the first few trips, especially on trailers used for ramp launching, fishing trips, or frequent coastal towing.\u003c\/p\u003e\u003ch6\u003eUse on board and around the trailer\u003c\/h6\u003e\u003cp\u003eThis bracket is a practical replacement part for trailer owners maintaining keel roller supports on small boats, fishing boats, runabouts, and other trailered vessels. It is most relevant when the boat needs better keel support during retrieval, storage, and road transport.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e11370-1\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e11372-1\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e11371-1\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"8\" \/ 5\"","offer_id":53721603375285,"sku":"QBP026560-V1","price":23.56,"currency_code":"USD","in_stock":false},{"title":"12\" \/ 10-1\/8\"","offer_id":53721603408053,"sku":"QBP026560-V3","price":46.89,"currency_code":"USD","in_stock":false},{"title":"10\" \/ 8-3\/16\"","offer_id":53721603440821,"sku":"QBP026560-V2","price":34.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1327420_qbp026560.webp?v=1794119083"},{"product_id":"qbp456707","title":"Attwood Marine 90 Degree P-Trap Fuel Tank Vent Replacement Cover","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 90° P-Trap Fuel Tank Vent is a replacement cover range for Attwood P-Trap fuel tank vents used in boat fuel venting systems. These covers are meant for existing Attwood vent installations where the exterior cap or trim has been damaged, weathered, or lost, while the vent body and hose connection remain serviceable.\u003c\/p\u003e\u003cp\u003eThe matching P-Trap vent family is made for 5\/8 in. I.D. fuel vent hose and is specified to meet ABYC standard. The P-Trap layout helps keep water from reaching the fuel tank vent line during normal sea conditions and washdowns, while still allowing air to move as the tank is filled.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement cover range for Attwood 90° P-Trap fuel tank vent installations.\u003c\/li\u003e\n\u003cli\u003eHelps restore the exterior vent cover without replacing the full vent assembly when the existing body is in good condition.\u003c\/li\u003e\n\u003cli\u003eSupports the P-Trap vent layout that allows tank ventilation during fueling while helping reduce water entry through the vent path.\u003c\/li\u003e\n\u003cli\u003eAssociated with Attwood P-Trap vents for 5\/8 in. I.D. fuel vent hose.\u003c\/li\u003e\n\u003cli\u003eWorks with the vent family specified to meet ABYC standard.\u003c\/li\u003e\n\u003cli\u003eAvailable in configurations for different existing Attwood vent cover styles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two replacement cover configurations. The correct choice depends on the Attwood vent already installed on the boat, so the existing vent body, cover shape, and visible trim should be checked before ordering.\u003c\/p\u003e\u003cp\u003eThe two listings separate the replacement by mount style and by the original Attwood vent model. Part 911526-1 is tied to the 1670 P-Trap vent, while part 911528-1 is tied to the 66419 P-Trap vent with stainless steel trim cover.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e911526-1, Mount Style Standard: black replacement cover for the Attwood 1670 P-Trap fuel tank vent. This suits installations where the existing black exterior cover needs to be renewed while the standard vent body remains in place.\u003c\/li\u003e\n\u003cli\u003e911528-1, Mount Style Flush: stainless steel replacement cover kit associated with the Attwood 66419 P-Trap fuel tank vent. This keeps the stainless trim appearance at the vent opening and should be matched to the existing Attwood vent body before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eBecause these are replacement covers, fit is driven by the existing Attwood vent model rather than by hose size alone. Before installation, compare the old cover and vent body with the selected replacement part, and confirm that the fuel vent assembly itself is not cracked, loose, or damaged.\u003c\/p\u003e\u003cp\u003eFor boats used in saltwater, exposed slips, or washdown-heavy fishing use, the vent cover is a small part that still matters. A missing or damaged cover can leave the vent opening more exposed, so replacement should be handled before regular spray, rain, or deck washdowns become a problem.\u003c\/p\u003e\u003ch6\u003eInstallation and care\u003c\/h6\u003e\u003cp\u003eInstall the replacement cover with the fuel system area well ventilated and away from ignition sources. If the old cover failed because of impact, corrosion around surrounding hardware, or movement in the vent body, inspect the hose, clamps, and mounting area before putting the boat back into service.\u003c\/p\u003e\u003cp\u003eRoutine cleaning with fresh water helps remove salt and deck grime from the vent area. Avoid sealing or coating over the vent opening, since the tank still needs clear air movement during fueling and normal operation.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e911526-1\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e911528-1\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Standard","offer_id":53721603539125,"sku":"QBP456707-V1","price":7.74,"currency_code":"USD","in_stock":false},{"title":"Flush","offer_id":53721603571893,"sku":"QBP456707-V2","price":25.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1327625_qbp456707.webp?v=1794119129"},{"product_id":"qbp921431","title":"Attwood Marine Sahara Automatic Bilge Pump, 500 GPH, 12V, Quicksilver Connectors","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 4505ST1 is a Sahara S500 automatic bilge pump for 12V systems with a Quicksilver connector, rated at 500 GPH at open flow and 350 GPH at 3.3 feet of head. It fits a 3\/4 inch I.D. discharge hose and uses a built-in automatic switch, so it suits boats that need a compact pump with automatic operation already built in.\u003c\/p\u003e\u003cp\u003eThe housing is about 5-1\/2 inches long, 3-1\/4 inches wide, and 4 inches high, which helps when bilge space is limited. This pump is for clearing standing bilge water, not fuel, oil, or fast flooding from heavy weather or hull damage. The pump body is sealed and submersible, but the electrical connection still needs to stay out of the water during installation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12V automatic bilge pump in the Sahara S500 class with a built-in switch and manual test knob\u003c\/li\u003e\n\u003cli\u003e500 GPH open-flow rating and 350 GPH at 3.3 feet of head\u003c\/li\u003e\n\u003cli\u003eQuicksilver connector version for boats already rigged with that connector style\u003c\/li\u003e\n\u003cli\u003eUses 3\/4 inch I.D. hose and a 2 amp fuse for this pump model\u003c\/li\u003e\n\u003cli\u003eCompact body at about 5-1\/2 x 3-1\/4 x 4 inches for tighter bilge areas\u003c\/li\u003e\n\u003cli\u003eMercury-free switch and 316 stainless steel motor shaft\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis pump is usually mounted on a flat pad at the lowest practical point in the bilge, with the outlet aimed toward the transom. For the best result, the discharge hose should rise steadily to the thru-hull rather than dipping along the way, and the float end of the pump should sit level with or slightly above the outlet end.\u003c\/p\u003e\u003cp\u003eFor replacement work, the main checkpoints are straightforward: confirm a 12V circuit, a 3\/4 inch discharge line, room for the pump body, and a harness that matches the Quicksilver connector on this version. That connector detail matters on boats where keeping the existing rigging layout is preferable to reworking the bilge pump connection.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis pump is a good match for runabouts, skiffs, bass boats, and other boats with a smaller bilge compartment and a 3\/4 inch discharge setup. It also makes sense when you want automatic bilge protection in the 500 GPH range without adding a separate float switch assembly for the same basic job.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e4505ST1\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721607602357,"sku":"QBP921431","price":70.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1322545_qbp921431.webp?v=1794119694"},{"product_id":"qbp460730","title":"Attwood Marine Stainless Steel Scupper Valve, SS316, Neoprene Flap, Mirror Finish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine Stainless Steel Scupper Valves is a range of barbed stainless steel scupper valves for cockpit, deck, and transom drain installations above the water line. These fittings combine a polished stainless exterior with an internal scupper flap that helps limit backwash when water pushes back toward the drain outlet.\u003c\/p\u003e\u003cp\u003eThis range covers 1-1\/2 in and 2 in hose sizes, giving boat builders and owners a straightforward way to match the valve to existing drain hose and hull thickness. The bodies use Enhanced 316 stainless steel alloy, and the barbed tail gives room for hose clamps at the connection point.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eEnhanced 316 stainless steel alloy body for drain outlets exposed to spray, washdowns, and saltwater air.\u003c\/li\u003e\n\u003cli\u003eScupper flap uses tough neoprene rubber with a molded V that seats into the grooved body to help reduce backwash.\u003c\/li\u003e\n\u003cli\u003eConcealed, corrosion-proof fasteners keep the outside face clean and reduce exposed hardware around the drain outlet.\u003c\/li\u003e\n\u003cli\u003eBarbed tail end leaves room for multiple hose clamps, which is useful where drain hose movement and vibration need a secure connection.\u003c\/li\u003e\n\u003cli\u003eChannel under the flange helps hold a bead of sealant during installation for a cleaner seal at the hull or transom surface.\u003c\/li\u003e\n\u003cli\u003eWrench flats or an end notch give the installer a gripping surface so the fitting can be tightened from inside the hull.\u003c\/li\u003e\n\u003cli\u003eIntended for installation above the water line only.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two hose-size configurations for matching different scupper drain runs.\u003c\/p\u003e\u003cp\u003eThe hose size, thread size, installation hole saw size, and maximum hull thickness change between the two variants. The scupper flap construction, stainless steel valve body, and above-waterline installation requirement remain consistent across these barbed scupper valve models.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e66553-1: 1-1\/2 in hose size. This version uses 1-1\/2 in NPSM threads, a 2 in installation hole saw size, and supports up to 3 in maximum hull thickness.\u003c\/li\u003e\n\u003cli\u003e66555-1: 2 in hose size. This version uses 2 in NPSM threads, a 2-1\/2 in installation hole saw size, and supports up to 2 in maximum hull thickness.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eMatch the valve to the inside diameter of the drain hose already on the boat, then confirm the hole saw size and available hull thickness before cutting or replacing an existing fitting. The 1-1\/2 in version has a 3 in flange outside diameter and 5-1\/2 in total length, while the 2 in version has a 3-5\/8 in flange outside diameter and 4-1\/2 in total length.\u003c\/p\u003e\u003cp\u003eBecause this is a scupper valve, placement matters. It belongs in an above-waterline drain outlet where the flap can help with backwash while still allowing deck or cockpit water to leave the boat. The barbed outlet should be paired with hose of the correct size and clamps suitable for the hose and installation environment.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThese valves are a good match for owners, yards, and builders working on cockpit drains, deck drains, and transom scupper outlets where a stainless exterior is preferred over plastic. They make sense on fishing boats, center consoles, cruisers, and other vessels where drain outlets see spray, sun, and regular washdowns.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the exterior with fresh water after saltwater use and inspect the flap during routine cleaning. A flap that is blocked by debris, marine growth, or hardened residue may not seat cleanly, so keeping the scupper area clear helps the valve drain properly and limit backwash as intended.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e66553-1\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e66555-1\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"1-1\/2\"","offer_id":53721608487093,"sku":"QBP460730-V1","price":141.87,"currency_code":"USD","in_stock":false},{"title":"2\"","offer_id":53721608519861,"sku":"QBP460730-V2","price":141.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1327630_qbp460730.jpg?v=1794119854"},{"product_id":"qbp463854","title":"Attwood Marine Perma-Plate Ski Mirror, Universal Mount, 180 Degree Convex, Shatterproof","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 9083-7 is a ski mirror for tow boats and runabouts that need a wider rearward view from the helm. It uses a shatterproof 180 degree convex lens and a compact mirror head that measures 7-5\/16 inches wide by 2-1\/2 inches high, so it adds coverage astern without taking much space at the dash or windshield.\u003c\/p\u003e\u003cp\u003eIts universal mount fits on the dash or on a windshield frame up to 3\/4 inch thick. The mirror head adjusts up, down, and side to side, and the spring-loaded ball joint helps it stay in position when the boat is running through chop and normal vibration.\u003c\/p\u003e\u003cp\u003eThe body is built in chrome-plated ZAMAK with a Perma-Plate chrome finish. That makes it a practical match for open helm stations where spray, sun, and routine wipe-downs are part of normal use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eUniversal mount for dash installation or windshield frames up to 3\/4 inch thick\u003c\/li\u003e\n\u003cli\u003eShatterproof 180 degree convex lens for a wider rearward view and fewer blind spots\u003c\/li\u003e\n\u003cli\u003eMirror head adjusts up, down, and side to side to suit different helm positions\u003c\/li\u003e\n\u003cli\u003eSpring-loaded ball joint helps keep the mirror from drifting out of position underway\u003c\/li\u003e\n\u003cli\u003eChrome-plated ZAMAK body with Perma-Plate chrome finish\u003c\/li\u003e\n\u003cli\u003eCompact mirror size of 7-5\/16 inches wide by 2-1\/2 inches high\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mirror works with boats that have enough room at the center of the dash or at the windshield frame for a clear line of sight astern. Windshield mounting is intended for framed windshields up to 3\/4 inch thick. Frameless windshields are not recommended for this installation style.\u003c\/p\u003e\u003cp\u003eOn stepped windshield frames, or on frames under 0.450 inch thick, a spacer may be needed to get the base seated correctly. That is worth checking before drilling or clamping the mirror in place.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFor a dash installation, the base is used as the drilling template and the mount is secured with two #10 x 3\/4 inch stainless steel wood or sheet metal pan-head screws, which are not included. Windshield installation uses the supplied clamping bracket and only needs basic hand tools. In either position, mounting close to the boat centerline gives the driver the cleanest view.\u003c\/p\u003e\u003cp\u003eOnce mounted, the head can be set for driver height and seating position. If more adjustment is needed, the mirror head can be rotated one-half turn and reset.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis mirror is a good match for ski boats, wake boats, and runabouts that tow riders and need a wider glance astern from a seated helm. It also makes sense as a replacement when an older mirror has lost tension or the reflective surface is no longer easy to use.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e9083-7\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721610125493,"sku":"QBP463854","price":22.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1322525_qbp463854.webp?v=1794119885"},{"product_id":"qbp463592","title":"Attwood Marine PowerGuard 24 Battery Box, For 24\/24M\/24F Batteries, Polypropylene, ABYC E-10","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine PowerGuard 24 Battery Box is a battery box for standard 24, 24M, and 24F Series batteries, with vented and non-vented configurations available for different installation requirements.\u003c\/p\u003e\u003cp\u003eIt is built around a polypropylene case that resists battery acid and gives the battery a contained, secured location on board. The box fits batteries up to 10-1\/8 in maximum height with terminals, with inside dimensions of 10-5\/8 in L x 7 in W x 10-1\/8 in H when the lid is installed.\u003c\/p\u003e\u003cp\u003eThis PowerGuard 24 box meets ABYC Standard E-10 and U.S. Coast Guard Specification 183.420 as an OEM-installed battery hold-down system. The included hold-down strap is rated to resist 350 lb of force, which helps keep the battery in place through normal hull movement, trailering, and vibration.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits standard 24, 24M, and 24F Series batteries with a maximum height of 10-1\/8 in with terminals.\u003c\/li\u003e\n\u003cli\u003ePolypropylene case resists battery acid and helps contain the battery in a dedicated box.\u003c\/li\u003e\n\u003cli\u003eMeets ABYC Standard E-10 and U.S. Coast Guard Specification 183.420 for OEM-installed battery hold-down use.\u003c\/li\u003e\n\u003cli\u003eHold-down strap is rated for 350 lb of force to help secure the battery during movement and vibration.\u003c\/li\u003e\n\u003cli\u003eFour cable openings measure 0.55 in diameter for routing battery cables through the lid area.\u003c\/li\u003e\n\u003cli\u003eDrop tested from -20°F to +120°F for use across a wide range of storage and operating conditions.\u003c\/li\u003e\n\u003cli\u003eOutside dimensions with lid installed are 14 in L x 9-5\/8 in W x 10-5\/8 in H.\u003c\/li\u003e\n\u003cli\u003eLarge handles with rolled edges help when positioning the box during installation or battery service.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis PowerGuard 24 Battery Box is offered in two ventilation configurations. Both variants are part of the same Group 24 battery box range and share the same general fit for 24, 24M, and 24F Series batteries.\u003c\/p\u003e\u003cp\u003eThe key difference is the lid ventilation. The vented version is used where battery gas ventilation is required, while the non-vented version is for installations that specifically call for a non-vented battery box. Battery location, compartment ventilation, and applicable boat requirements should be checked before installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e9065-1: Vented. This configuration includes ventilation in the lid area, making it the more typical choice for many marine battery compartments where battery gases need a path to escape.\u003c\/li\u003e\n\u003cli\u003e9069-1: Non-vented. This configuration uses a non-vented cover for applications where that enclosure style is required by the installation layout or system specification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe box should be mounted on a flat, supported surface where the battery can sit level and the strap can hold it firmly in place. Allow room above and around the lid for cable routing, inspection, and battery service.\u003c\/p\u003e\u003cp\u003eBefore ordering, compare the battery case size, terminal height, and cable exit direction with the inside dimensions of the box. The 40 in hold-down strap and mounting hardware are included, so the installer can secure the box and battery as part of the installation.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis battery box is a practical fit for small boats, fishing boats, runabouts, pontoons, and trailerable boats using a Group 24 starting or house battery. It helps keep the battery contained and secured in storage lockers, utility spaces, and other protected mounting locations where a fixed hold-down is needed.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePowerGuard 24 battery box with lid\u003c\/li\u003e\n\u003cli\u003e40 in hold-down strap\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e9065-1\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e9069-1\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Vented","offer_id":53721610158261,"sku":"QBP463592-V1","price":12.88,"currency_code":"USD","in_stock":false},{"title":"Non-Vented","offer_id":53721610191029,"sku":"QBP463592-V2","price":15.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1327639_qbp463592.webp?v=1794119900"},{"product_id":"qbp262977","title":"Attwood Marine Cover Support Bow Sockets, Angled, ZAMAK, Pair","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 10796-3 is a pair of angled slat sockets for mounting boat cover support bows made from fiberglass, aluminum, or wood. The sockets are made from ZAMAK, installation uses #10 fasteners, and each socket sits against a plastic backing plate that helps protect the boat finish at the mounting point.\u003c\/p\u003e\u003cp\u003eThis hardware gives a cover support bow a fixed place to land so the bow can hold shape under a mooring or storage cover. When an old socket is cracked, loose, or rubbing the gelcoat, replacing it can help the bow sit correctly again and keep the cover from sagging across the cockpit or bow seating area.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAngled socket shape for boat cover support bows\u003c\/li\u003e\n\u003cli\u003eFits fiberglass, aluminum, and wood bows\u003c\/li\u003e\n\u003cli\u003eZAMAK construction with plastic backing plate to reduce contact against the boat finish\u003c\/li\u003e\n\u003cli\u003eSold as a pair for two-point bow mounting\u003c\/li\u003e\n\u003cli\u003eInstallation uses #10 fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThese sockets are for cover-support hardware, not for seat mounts, rail fittings, or bimini frame hardware. Fit depends on the bow material and the shape of the bow end, so it helps to match the angled socket style to the hardware already on the boat before drilling new holes.\u003c\/p\u003e\u003cp\u003eBecause the socket accepts fiberglass, aluminum, and wood bows, it suits many runabouts, fishing boats, and older trailer boats that use a removable support bow under the cover. It is a sensible replacement when the bow itself is still usable and the mounting sockets are the worn part.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the plastic backing plate against the finished surface so the socket does not rub directly on gelcoat or paint. Keep the socket aligned with the natural angle of the support bow so the bow seats fully without side load on the fasteners.\u003c\/p\u003e\u003cp\u003eBefore installation, check the mounting area for enlarged holes, surface cracks, or a weak substrate left by loose cover hardware. A sound mounting surface and correctly sized #10 fasteners help the socket stay in place as the boat moves on the trailer, at the dock, or under a cover in storage.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e10796-3\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721611894965,"sku":"QBP262977","price":8.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1322085_qbp262977.webp?v=1794120132"},{"product_id":"qbp199848","title":"Attwood Marine Battery Tray Hold-Down Bolt, For 90905 and 90915","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 911352 is a replacement bolt for Attwood 24 Series battery trays. It is used in the tray hold-down setup and is a direct fit for tray models 90905 and 90915.\u003c\/p\u003e\u003cp\u003eThis is a practical replacement part when the original bolt is missing, worn, or damaged and the rest of the tray is still serviceable. On a boat, secure battery hold-down hardware matters because batteries are exposed to vibration, hull impact, and movement underway, so replacing the correct tray bolt helps restore the intended clamping setup without changing the full tray.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement hold-down bolt for Attwood 24 Series battery trays\u003c\/li\u003e\n\u003cli\u003eFits Attwood tray models 90905 and 90915\u003c\/li\u003e\n\u003cli\u003eUsed to restore the battery tray hold-down hardware when the original bolt needs replacement\u003c\/li\u003e\n\u003cli\u003eUseful for keeping an existing tray in service without replacing the complete battery tray assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis part is for select Attwood battery tray applications, not for universal battery mounting across different tray styles. Before ordering, match the tray model on board and confirm you are replacing the bolt in the original hold-down arrangement used on the 24 Series tray.\u003c\/p\u003e\u003cp\u003eBecause it is a replacement hardware item, it is best suited to installations where the tray base and strap system are already in place and only the bolt portion needs to be renewed.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward when you are servicing an existing Attwood tray. Remove the damaged or missing bolt, check the tray and strap for wear, and reinstall the replacement bolt in the original mounting position so the battery can be clamped down correctly.\u003c\/p\u003e\u003cp\u003eThis part makes sense for boat owners, service shops, and riggers who want to bring an existing battery tray back to working order without changing tray layout or battery location.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e911352\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721612550325,"sku":"QBP199848","price":2.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1322050_qbp199848.webp?v=1794120187"},{"product_id":"qbp456484","title":"Attwood Marine All-Round Light Replacement Globe, Frosted, Polycarbonate","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 91017B7 is a frosted replacement globe lens for compatible Attwood all-round lights. It fits 5100, 5110, 7100, 7101, 7105, 7109, 7205, 910958, and 910957 series lights, so it is meant to restore the light you already have rather than replace the full fixture.\u003c\/p\u003e\u003cp\u003eThis lens uses a polycarbonate globe with a frosted finish and a 360-degree all-round light shape. It makes sense when the original globe is cracked, cloudy, or missing but the light base and the rest of the assembly are still in usable condition.\u003c\/p\u003e\u003cp\u003eOn a boat that sees regular spray, sun, and vibration, replacing only the globe can be a straightforward way to get a compatible all-round light back into service. It is a practical spare for owners keeping an older Attwood light setup working on small fishing boats, runabouts, center consoles, and cruisers.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement frosted globe lens for compatible Attwood all-round lights\u003c\/li\u003e\n\u003cli\u003eFits 5100, 5110, 7100, 7101, 7105, 7109, 7205, 910958, and 910957 series lights\u003c\/li\u003e\n\u003cli\u003ePolycarbonate lens construction\u003c\/li\u003e\n\u003cli\u003e360-degree globe format for all-round light applications\u003c\/li\u003e\n\u003cli\u003eLets you replace a damaged globe without changing the complete light when the rest of the assembly is still serviceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is not a universal navigation light lens. The important match point is the Attwood light series already on the boat, not just the look of the globe. If the existing fixture belongs to one of the compatible series listed above, this replacement keeps the repair focused on the part that failed instead of changing the whole light.\u003c\/p\u003e\u003cp\u003eThat makes it a sensible option when the lamp, pole, wiring, and base are still sound and only the globe needs attention. It suits boats where the original all-round light is part of an existing Attwood setup and the goal is to restore normal fit and appearance with the correct replacement lens.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBecause this is the lens only, installation is usually simplest when the original light housing is still intact. Before fitting the new globe, inspect the mounting area, clean away salt residue and dirt, and make sure the light socket and contacts are still in good condition.\u003c\/p\u003e\u003cp\u003eFor owners who keep spare service parts on board, this kind of replacement is useful after a dockside bump, trailering damage, or a globe that has aged and gone hazy over time. It is a good match for keeping a compatible Attwood all-round light in service without replacing more hardware than necessary.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e91017B7\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721612583093,"sku":"QBP456484","price":9.18,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1107588_qbp456484jpg.jpg?v=1794120192"},{"product_id":"qbp068060","title":"Attwood Marine LakeSport Seat Mount Bushing, 3 Degree Tilt","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 801 is a replacement insert bushing for LakeSport 3 degree seat mount hardware. It is used in the seat-mount assembly tied to the LakeSport 2-3\/8 inch pedestal format, so the key check before ordering is that your boat is already using that mount family and pedestal size.\u003c\/p\u003e\u003cp\u003eThis is a small service part, but it matters because the seat mount depends on the insert for proper fit inside the assembly. It is the sort of replacement owners look for when an existing LakeSport mount is still worth keeping in service and only the insert needs attention.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement insert bushing for Attwood Marine LakeSport 3 degree seat mount hardware\u003c\/li\u003e\n\u003cli\u003eReferenced for LakeSport seat-mount setups built around a 2-3\/8 inch pedestal format\u003c\/li\u003e\n\u003cli\u003eService part associated with the 8400 bell insert application\u003c\/li\u003e\n\u003cli\u003eUseful when the original insert in the mount assembly is worn or damaged and the rest of the seat hardware remains serviceable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, match the mount style as well as the brand. This bushing is tied to the LakeSport 3 degree seat-mount setup, not every pedestal or every seat base in the Attwood range. Measure the pedestal format at the mount and confirm that your current hardware uses the 2-3\/8 inch arrangement.\u003c\/p\u003e\u003cp\u003eThis makes sense for boats that already have a LakeSport seating setup at the helm, in the cockpit, or at a fishing station and need the insert rather than a full new mount. It is most useful as a like-for-like repair part where the existing pedestal, bell, and seat mount are already known to match.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eAccess to the seat mount is the main part of the job. Once the seat and mount are apart, remove the old insert, clean out any salt, grit, or dried debris inside the mount, and inspect the surrounding bell and pedestal contact surfaces before fitting the new bushing.\u003c\/p\u003e\u003cp\u003eOn boats that stay outside or see frequent washdowns, it is worth checking the rest of the seat hardware at the same time. Wear in the mount, loosened fasteners, or damage in the pedestal tube can affect how the new insert sits and how the seat feels once everything is back together.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e801\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721613271221,"sku":"QBP068060","price":9.76,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1322041_qbp068060.webp?v=1794120349"},{"product_id":"qbp410202","title":"Attwood Marine LightArmor LED All-Round Folding Pole Light, 2-Pin Standard Pole, 10.5-14.4V DC, 2-Mile 360° Visibility","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine LightArmor is an LED all-round folding pole light for 12V boat navigation lighting, with 2 nautical mile, 360-degree visibility for boats up to 39.4 ft (12 m). It runs on 10.5V DC to 14.4V DC and draws 1.8 watts at 12V DC, making it a practical fit for small powerboats that need an all-round white light without adding much electrical load.\u003c\/p\u003e\u003cp\u003eThis LightArmor pole light uses a mid-point hinge so the pole folds in half for storage. That matters on boats where a taller all-round light is needed to sit at least one meter above the sidelights, but a full-length pole is awkward to stow in a locker, under a gunwale, or inside a console.\u003c\/p\u003e\u003cp\u003eThe standard 2-pin pole format is intended for compatible 2-pin bases. The LED light engine includes anti-glare and condensation-management features, and the electronics are built to handle shock, corrosion, and water exposure in normal marine use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2 nautical mile, 360-degree all-round white visibility for boats up to 39.4 ft (12 m).\u003c\/li\u003e\n\u003cli\u003eOperates from 10.5V DC to 14.4V DC for typical 12V marine electrical systems.\u003c\/li\u003e\n\u003cli\u003eLow 1.8-watt draw at 12V DC helps limit battery drain during night operation or anchoring.\u003c\/li\u003e\n\u003cli\u003eMid-point folding pole makes a long navigation light easier to store when it is removed from the base.\u003c\/li\u003e\n\u003cli\u003eStandard 2-pin pole connection for use with compatible 2-pin light bases.\u003c\/li\u003e\n\u003cli\u003eAnti-glare light engine helps reduce stray light at the helm and supports better night vision.\u003c\/li\u003e\n\u003cli\u003eRated for more than 50,000 hours of LED use.\u003c\/li\u003e\n\u003cli\u003eUSCG certified for the stated 2 nautical mile all-round navigation light application.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two pole-length configurations. Both are LightArmor LED all-round folding pole lights with a standard 2-pin pole format; the practical difference is the overall pole length.\u003c\/p\u003e\u003cp\u003eThe length should be matched to the boat’s light placement so the all-round light sits high enough above the sidelights and surrounding structures when installed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e5570-60-1: 60-inch pole length. This version suits installations where a 60-inch all-round light gives the needed height while keeping the removed pole a little easier to stow.\u003c\/li\u003e\n\u003cli\u003e5570-72-1: 72-inch pole length. This version gives extra height for boats where the mounting base sits lower or where the light needs to clear windshields, canvas, or other deck structures.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eCheck the existing base before ordering. This is the standard 2-pin pole style, so the plug and collar style need to match the base already installed on the boat or the replacement base being used.\u003c\/p\u003e\u003cp\u003eFor navigation light placement, verify that the all-round light will be visible through a full 360 degrees and will not be blocked by a bimini, T-top, windshield frame, rod holders, antennas, or passengers. On many small powerboats, the longer pole is used when the base is mounted low at the transom or aft deck.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis light is a good match for boats that need a removable all-round white light for running after dark, sitting at anchor, or complying with navigation light requirements on evening fishing trips and dock-to-dock runs. The folding pole is especially useful when storage space is tight and a rigid long pole would be inconvenient.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e5570-60-1\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e5570-72-1\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"60\"","offer_id":53721615007925,"sku":"QBP410202-V1","price":122.82,"currency_code":"USD","in_stock":false},{"title":"72\"","offer_id":53721615040693,"sku":"QBP410202-V2","price":136.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1327598_qbp410202.jpg?v=1794120623"},{"product_id":"qbp682123","title":"Attwood Marine Swivl-Eze Seat Base Insert Bushing, 3\/4 in Pin Post","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine P340 is a black replacement bushing for seat bases that use a 3\/4 inch pin-post pedestal. It is the wear insert that sits between the post and base, so it becomes an important part when a seat starts to feel loose, turns roughly, or develops extra play.\u003c\/p\u003e\u003cp\u003eThis is a small service part, but it has a direct effect on how a pedestal seat feels underway and at rest. Replacing a worn bushing can freshen the fit at the base without replacing the whole pedestal assembly, which is useful on boats that still have sound seat hardware and only need attention at the contact point.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement bushing for seat bases built around a 3\/4 inch pin-post pedestal\u003c\/li\u003e\n\u003cli\u003eBlack nylon insert used at the wear point between the pedestal post and seat base\u003c\/li\u003e\n\u003cli\u003eHelpful when a seat begins to rock, squeak, or lose its snug swivel feel from bushing wear\u003c\/li\u003e\n\u003cli\u003eLets you service the base instead of replacing the full pedestal, post, and seat mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCheck your seating hardware carefully before ordering. This part is meant for 3\/4 inch pin-post pedestal setups and is the bushing insert only, not a complete base, post, swivel, or mounting plate.\u003c\/p\u003e\u003cp\u003eIt makes the most sense when you are keeping an existing Attwood or Swivl-Eze style pedestal system in service and need to restore the fit at the seat base. If your boat uses another post diameter or a different pedestal design, this will not be the right replacement.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward during normal seat-hardware service. Remove the worn insert from the base, inspect the mating pin and base opening for damage or heavy wear, and fit the new bushing in place before reassembling the seat.\u003c\/p\u003e\u003cp\u003eThis kind of repair is especially useful on helm seats, cockpit seats, and fishing seats where people swivel in and out often. When the rest of the pedestal hardware is still in good shape, replacing the bushing is a practical way to tighten the seat back up and keep the seating position feeling stable on the water.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eP340\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721615171765,"sku":"QBP682123","price":8.22,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1112429_qbp682123jpg.jpg?v=1794120660"},{"product_id":"qbp826359","title":"Attwood Marine Cowl Vent, 3 in Ventilation Hose, Chrome-Plated ZAMAK","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 1364A1 is a deck-mount cowl vent for standard 3 inch ventilation hose. It can be set up as either an intake or an exhaust, so it works where you need passive airflow through an enclosed space rather than a powered blower.\u003c\/p\u003e\u003cp\u003eThis vent uses a flexible flange attachment that connects to the hose below deck, then accepts the vent head once the base is mounted. The vent body is die-cast ZAMAK with a chrome finish, and the flange is black plastic. For the installation shown in the instructions, the deck opening is 3-1\/2 inches when a nylon wire tie is used as the hose clamp.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits any standard 3 inch ventilation hose\u003c\/li\u003e\n\u003cli\u003eCan be used for either intake or exhaust airflow\u003c\/li\u003e\n\u003cli\u003eDie-cast ZAMAK vent head with chrome finish\u003c\/li\u003e\n\u003cli\u003eBlack plastic flange attaches the hose below deck\u003c\/li\u003e\n\u003cli\u003eFlexible flange-and-head design allows the vent head to snap onto the mounted base\u003c\/li\u003e\n\u003cli\u003eInstallation uses three #8 countersunk screws and a hose clamp or 15 inch nylon wire tie\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is a straightforward replacement part when your boat already uses a 3 inch vent hose and a deck cowl in this style. The base is used as the drilling template, the hose slides up through the deck cutout and over the flange, and the vent head attaches after the base is fastened down. It is worth checking the deck opening before ordering, since the stated 3-1\/2 inch hole size is tied to the clamp method used during installation.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis vent suits refit work on boats that need passive deck ventilation through a hose-fed run below deck. It makes sense for owners replacing an older cowl vent on a sailboat, runabout, or classic fiberglass boat where the existing hose size and mounting style need to stay the same.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e1364A1\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":53721615302837,"sku":"QBP826359","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1322187_qbp826359.webp?v=1794120696"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/collections\/17bf4d77-3cec-5fad-8904-602e66fa47c1.webp?v=1794118077","url":"https:\/\/www.qualityboatparts.com\/collections\/brand-attwood-marine.oembed?page=2","provider":"Quality Boat Parts","version":"1.0","type":"link"}