{"title":"Blue Sea Systems","description":"","products":[{"product_id":"qbp192019","title":"Blue Sea Systems Common BusBar Cover, For 2302 Common 150A BusBar, 20 Gang","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 2716 is a busbar cover made for the Blue Sea Systems 2302 Common 150A BusBar with a 20-gang layout. It snaps onto the terminal studs and adds insulation over the connection area while keeping wire access open, which helps reduce accidental contact around exposed distribution points.\u003c\/p\u003e\u003cp\u003eThis is a fit-specific part rather than a universal cover, so the underlying busbar part number matters. It is a straightforward match when you are using the 2302 as a common point for positive distribution or for negative or AC ground collection on a boat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade to fit Blue Sea Systems busbar PN 2302\u003c\/li\u003e\n\u003cli\u003eMatches the 20-gang Common 150A BusBar layout\u003c\/li\u003e\n\u003cli\u003eSnap-on attachment to the terminal studs\u003c\/li\u003e\n\u003cli\u003eHelps insulate exposed connections and reduce accidental contact\u003c\/li\u003e\n\u003cli\u003eKeeps access open for wire routing and service checks\u003c\/li\u003e\n\u003cli\u003ePolycarbonate cover construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cover is intended for the Blue Sea Systems 2302 busbar, so it is best used when you need a clean, matched cover for that exact distribution block. On a boat with several branch circuits landing on one common bus, that fit matters because the cover needs to clear the stud locations and terminal layout without interfering with normal cable runs.\u003c\/p\u003e\u003cp\u003eIt suits owners, electricians, and refit installers who are building or tidying a distribution point under a helm, inside an electrical locker, or near a battery bank and want the terminals covered without changing the busbar itself.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe cover presses onto the busbar studs after the 2302 busbar has been installed and wired. Once in place, it leaves the wire entry area accessible, which is useful when the busbar remains part of a serviceable panel or distribution area that needs periodic inspection.\u003c\/p\u003e\u003cp\u003eFor retrofit work, this part also helps when an older 2302 installation is still in good condition but the exposed connection area needs better insulation and a neater finished look.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52020977959093,"sku":"QBP192019","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329929_qbp192019.jpg?v=1780191614"},{"product_id":"qbp827855","title":"Blue Sea Systems DC M-Series Blank Panel Square, For M-Series Battery Switches, 4.75 x 4.88 in","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1139 is a square blank panel for mounting an M-Series battery switch in a DC electrical panel layout. Its face measures 4.88 in. wide by 4.75 in. high, which makes it a straightforward match for installations built around the Blue Sea M-Series switch footprint.\u003c\/p\u003e\u003cp\u003eThis panel is useful when you are building a battery switch station from separate parts or replacing a worn panel face without changing the rest of the setup. It gives the switch opening a clean finished look and keeps the battery management area more orderly at the helm, inside a console, or in an electrical locker.\u003c\/p\u003e\u003cp\u003eThis is the panel only and does not include the switch. That makes it a practical choice for refits where the switch and cabling are being selected separately to suit the boat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for Blue Sea Systems M-Series battery switch mounting applications\u003c\/li\u003e\n\u003cli\u003eSquare panel format with a 4.88 in. x 4.75 in. face size\u003c\/li\u003e\n\u003cli\u003eUseful for new panel builds, replacement work, or matching an existing M-Series layout\u003c\/li\u003e\n\u003cli\u003eBlack panel finish works well with modern DC switch and battery management panels\u003c\/li\u003e\n\u003cli\u003ePanel-only configuration lets you pair it with the specific M-Series switch needed for the boat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis panel suits installations that use a Blue Sea M-Series battery switch and need the correct square mounting face. Before ordering, check that your switch is part of the M-Series range and confirm there is enough flat mounting space for the panel dimensions.\u003c\/p\u003e\u003cp\u003eIt is a good match for owners replacing a damaged or weathered panel face, and for builders putting together a custom battery switching station where the mounting panel and switch are purchased separately.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eOn most boats, a panel like this is fitted where the battery switch needs to stay accessible for normal operation and emergency isolation, while still being protected from accidental knocks. Common mounting spots include inside a center console, near the main DC distribution area, or in a service compartment close to the battery bank.\u003c\/p\u003e\u003cp\u003eBecause this part is only the panel, the rest of the installation can be planned around the boat's cable routing, switch selection, and access requirements without forcing a preconfigured assembly.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eOne square blank panel for M-Series battery switch mounting\u003c\/li\u003e\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52020977991861,"sku":"QBP827855","price":128.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329898_qbp827855.jpg?v=1780191614"},{"product_id":"qbp436165","title":"Blue Sea Systems Contura Switch Mounting Panel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Contura Switch Mounting Panel is a modular mounting system for fitting Blue Sea Systems Contura switches into a helm, dash, cockpit, cabin, or equipment panel. The brackets are made to build clean switch banks in different sizes, with center and end pieces for grouped installations, a single-position option for one switch, and a plug for closing an unused switch opening.\u003c\/p\u003e\u003cp\u003eThe center, end, and single mounting brackets fit six panel thicknesses: 0.06\" (1.57mm), 0.09\" (2.36mm), 0.13\" (3.17mm), 0.19\" (4.75mm), 0.25\" (6.35mm), and 0.38\" (9.52mm). That range covers many common fiberglass, aluminum, and fabricated dash panels found on recreational and work boats.\u003c\/p\u003e\u003cp\u003eThis series is useful when a boat owner, installer, or electronics technician wants a Contura switch layout that looks organized and can be expanded without replacing the entire panel face. It is a hardware mounting product, so switch electrical ratings, circuit protection, and wiring details should be matched to the specific Contura switch and circuit being installed.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eModular bracket format supports switch groups in different sizes, with center and end pieces used to build multi-switch layouts.\u003c\/li\u003e\n\u003cli\u003eMounting bracket options are available for single-position layouts and grouped Contura switch banks.\u003c\/li\u003e\n\u003cli\u003eCenter, end, and single brackets fit six panel thicknesses from 0.06\" (1.57mm) through 0.38\" (9.52mm).\u003c\/li\u003e\n\u003cli\u003eWorks with Blue Sea Systems Contura switch families, including common SPST, SPDT, DPST, and DPDT Contura configurations.\u003c\/li\u003e\n\u003cli\u003ePanel plug option fills an unused Contura switch mounting panel opening for a cleaner dash or switch bank.\u003c\/li\u003e\n\u003cli\u003eCompact bracket format helps keep switch additions tidy on helm panels, cabin control panels, and accessory switch locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in four configurations for building or finishing a Contura switch mounting layout.\u003c\/p\u003e\u003cp\u003eThe mounting role changes by variant. The center and end brackets are used together for grouped switch banks, the single bracket is used for one switch position, and the plug fills an unused opening in a Contura switch mounting panel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8266, Type Center. This center bracket is used within a multi-switch assembly, between end brackets, when adding switch positions to a grouped Contura layout.\u003c\/li\u003e\n\u003cli\u003e8267, Type End. This end bracket finishes the outside edge of a grouped switch bank and helps define the left or right side of the assembled panel opening.\u003c\/li\u003e\n\u003cli\u003e8278, Type Plug. This plug is used with a Contura switch mounting panel when a switch opening needs to be closed rather than populated with a switch.\u003c\/li\u003e\n\u003cli\u003e8268, Type Single. This single-position bracket is used when the panel only needs one Contura switch or control in that location.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore cutting or modifying a panel, confirm the selected bracket type, the number of switch positions, and the panel thickness at the mounting location. The supported thickness range is especially helpful on boats where the dash or console may include fiberglass laminate, overlay panels, or custom electrical panel faces.\u003c\/p\u003e\u003cp\u003eFor grouped layouts, the center and end pieces should be planned as a set so the finished switch bank has the correct number of positions and a clean edge on both sides. For a single accessory switch, such as a light, pump, horn, or electronics power control, the single-position bracket keeps the installation compact.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThese mounting panels suit refits, helm upgrades, and accessory additions where Contura rocker switches are already being used or are being added for a new circuit. They are a practical match for small control clusters at the helm, cockpit, cabin entry, flybridge, or equipment panel where a neat switch opening matters as much as the circuit layout.\u003c\/p\u003e\u003cp\u003eThe plug option is useful during staged upgrades. An installer can leave space for a future circuit and close the unused opening until the next switch is added.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Center","offer_id":52020978155701,"sku":"QBP436165-V1","price":9.99,"currency_code":"USD","in_stock":true},{"title":"End","offer_id":52020978188469,"sku":"QBP436165-V6","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Plug","offer_id":52020978221237,"sku":"QBP436165-V0","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Single","offer_id":52020978254005,"sku":"QBP436165-V7","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333232_qbp436165.jpg?v=1780191615"},{"product_id":"qbp412073","title":"Blue Sea Systems Push Button Reset Only Screw Terminal Circuit Breaker, 32V DC, Panel Mount, #8 Screw Terminal, Thermal Trip, Ignition Protected","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Push Button Reset Only Screw Terminal Circuit Breaker is a reset-only thermal branch circuit breaker for DC boat circuits where switching is handled elsewhere. It is used for branch circuit protection and can also be used for 24-hour circuit protection, with amperage options from 3A to 40A across the range.\u003c\/p\u003e\u003cp\u003eThis breaker is rated for a maximum of 32V DC and uses #8 screw terminals for secure wire connections behind a panel. The panel mount is 3\/8-27 UNS, which suits compact electrical layouts where multiple protected circuits need to fit cleanly in a helm, console, battery area, or distribution panel.\u003c\/p\u003e\u003cp\u003eThe trip-free mechanism prevents the breaker from being held on during a fault current condition, while the push-to-reset button makes recovery straightforward after the fault has been corrected. It is ignition protected for installation aboard gasoline-powered boats and operates from -10° C to 60° C.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReset-only thermal circuit breaker for branch circuits and 24-hour circuit protection where a separate switch is used or switching is not required.\u003c\/li\u003e\n\u003cli\u003eAmperage range covers 3A, 5A, 7A, 10A, 15A, 20A, 25A, 30A, and 40A circuit protection needs.\u003c\/li\u003e\n\u003cli\u003e32V DC maximum voltage rating for common marine DC electrical systems.\u003c\/li\u003e\n\u003cli\u003eTrip-free operation prevents the breaker from being forced to stay on during a fault current condition.\u003c\/li\u003e\n\u003cli\u003ePush-button manual reset gives a clear, simple way to reset the circuit after troubleshooting.\u003c\/li\u003e\n\u003cli\u003e#8 screw terminals support secure panel wiring and help keep connections firm in areas exposed to vibration.\u003c\/li\u003e\n\u003cli\u003ePanel mount with 3\/8-27 UNS thread supports compact installations in control panels and distribution areas.\u003c\/li\u003e\n\u003cli\u003eInterrupt capacity is 3000A at 14.7V DC and 2500A at 28V DC.\u003c\/li\u003e\n\u003cli\u003eIgnition protected for use aboard gasoline-powered boats when installed as part of a proper marine electrical system.\u003c\/li\u003e\n\u003cli\u003eOptional push button waterproof boots are available for added protection in wet locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis circuit breaker range varies by amperage rating, from 3A through 40A, so it can be matched to the load and wire protection requirement of the circuit being protected. The reset-only format, screw terminal connection, 32V DC maximum rating, panel mounting, thermal trip behavior, and trip-free function remain consistent across the range.\u003c\/p\u003e\u003cp\u003eLower amperage versions suit smaller electronics and control circuits, while higher amperage versions are used for larger DC loads that still fall within the breaker rating and the vessel’s wiring plan. The breaker should be selected to match the protected conductor and the circuit requirements, not just the equipment size.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the breaker in an accessible panel location so the reset button can be reached without removing covers or disturbing wiring. The #8 screw terminals should be tightened to 6 in-lb or 0.68 Nm, which helps avoid loose connections without overtightening the hardware.\u003c\/p\u003e\u003cp\u003eBecause this is a reset-only breaker, it does not replace a switch when routine on and off control is needed. It works well in circuits where the load already has its own control, where switching is handled elsewhere, or where continuous circuit protection is required.\u003c\/p\u003e\u003ch6\u003eMarine use on board\u003c\/h6\u003e\u003cp\u003eThis breaker is a practical match for helm panels, small distribution panels, electronics circuits, lighting circuits, pump controls, and other DC branch circuits where compact protection is needed. On gasoline-powered boats, the ignition-protected rating matters when the installation location may be near machinery spaces or other areas where ignition protection is required by the system design.\u003c\/p\u003e\u003cp\u003eFor wet cockpit, deck, or console locations, the optional waterproof boot can help protect the push button area from spray and washdowns. In dry protected panels, the standard button layout keeps the installation compact and easy to service.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"3A","offer_id":52023025107125,"sku":"QBP412073-V4","price":11.99,"currency_code":"USD","in_stock":true},{"title":"5A","offer_id":52023025139893,"sku":"QBP412073-V8","price":11.99,"currency_code":"USD","in_stock":true},{"title":"7A","offer_id":52023025172661,"sku":"QBP412073-V0","price":11.99,"currency_code":"USD","in_stock":true},{"title":"10A","offer_id":52023025205429,"sku":"QBP412073-V9","price":11.99,"currency_code":"USD","in_stock":true},{"title":"15A","offer_id":52023025238197,"sku":"QBP412073-V6","price":11.99,"currency_code":"USD","in_stock":true},{"title":"20A","offer_id":52023025270965,"sku":"QBP412073-V5","price":11.99,"currency_code":"USD","in_stock":true},{"title":"25A","offer_id":52023025303733,"sku":"QBP412073-V3","price":11.99,"currency_code":"USD","in_stock":true},{"title":"30A","offer_id":52023025336501,"sku":"QBP412073-V2","price":11.99,"currency_code":"USD","in_stock":true},{"title":"40A","offer_id":52023025369269,"sku":"QBP412073-V7","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333285_qbp412073.webp?v=1780191626"},{"product_id":"qbp412634","title":"Blue Sea Systems Medium Duty Push Button Reset Only Circuit Breaker, 120V AC\/32V DC, Thermal Trip","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Medium Duty Push Button Reset-Only Circuit Breaker is a weatherproof thermal circuit breaker range for 15A to 60A circuits where switching is handled elsewhere or not needed. It supports up to 120V AC or 32V DC, uses manual push-button reset operation, and has a trip-free mechanism that cannot be held on during a fault current condition.\u003c\/p\u003e\u003cp\u003eThis reset-only breaker is a practical fit for main, branch, or 24-hour circuit protection on boats with compact electrical panels and limited mounting space. It is ignition protected for installation aboard gasoline-powered boats, and its #10-32 stainless steel terminal studs help suit it to marine electrical environments where corrosion resistance and secure connections matter.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAvailable in 15A, 20A, 30A, 40A, 50A, and 60A ratings for matching the breaker to the circuit load and wire ampacity.\u003c\/li\u003e\n\u003cli\u003eThermal trip operation with manual push-button reset only, so it protects the circuit without acting as a normal on-off switch.\u003c\/li\u003e\n\u003cli\u003eTrip-free mechanism prevents the breaker from being held on during a fault current condition.\u003c\/li\u003e\n\u003cli\u003eRated for maximum voltage of 120V AC and 32V DC, covering common onboard AC and DC protection needs within those limits.\u003c\/li\u003e\n\u003cli\u003eWeatherproof construction supports use in exposed or damp marine locations such as helm panels, cockpit service areas, and equipment compartments.\u003c\/li\u003e\n\u003cli\u003eIgnition protected for use aboard gasoline-powered boats when installed in suitable circuits and locations.\u003c\/li\u003e\n\u003cli\u003e#10-32 stainless steel terminal studs with 30 in-lb torque specification support secure cable terminations.\u003c\/li\u003e\n\u003cli\u003eInterrupt capacity is 3000A at 120V AC and 5000A at 32V DC, giving clear limits for system fault-current planning.\u003c\/li\u003e\n\u003cli\u003eCaptive star lock washers help meet anti-rotation requirements and reduce the chance of losing small hardware during panel work.\u003c\/li\u003e\n\u003cli\u003eMeets SAE J1428, SAE J553, UL 1077, and UL 1500 standards.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range varies by amperage only, with options from 15A through 60A. The available configurations cover lighter accessory circuits as well as higher-load circuits, while keeping the same medium-duty push-button reset-only format across the series.\u003c\/p\u003e\u003cp\u003eSelect the amperage based on the protected wire size, the expected continuous load, and the type of load on the circuit. Motor and pump circuits can draw short inrush current at startup, so the breaker rating should be checked against the full circuit design rather than the running current alone.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe breaker uses #8-32 mounting screw threads and is built for compact panel layouts where several protected circuits may be grouped together. Its push-button face makes reset access straightforward from the front of the panel, while the rear terminal studs keep the wiring connections behind the mounting surface.\u003c\/p\u003e\u003cp\u003eUse the stated 30 in-lb terminal stud torque and size the connected conductors for the circuit, overcurrent protection rating, and installation environment. As with any marine overcurrent device, it should be installed where it protects the conductor as close to the source as practical and where it remains accessible for inspection and reset.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis breaker range makes sense for boats that need resettable circuit protection but already have separate switching at the helm, distribution panel, or equipment controller. It is a good match for protected feeder circuits, always-on loads, and branch circuits where a clean reset button is preferred over a switch-style breaker.\u003c\/p\u003e\u003cp\u003eThe weatherproof and ignition-protected construction also makes it useful around small powerboats, center consoles, cruisers, and workboats where panels may be exposed to spray, humidity, vibration, and frequent service access.\u003c\/p\u003e\u003ch6\u003eElectrical and system notes\u003c\/h6\u003e\u003cp\u003eThis is a reset-only circuit breaker, not a switch replacement. It should not be used as the normal way to turn equipment on and off unless the overall system layout specifically calls for that behavior.\u003c\/p\u003e\u003cp\u003eChoose the breaker rating so it protects the wiring first, not just the connected equipment. The correct rating depends on conductor size, insulation temperature rating, run length, load profile, and applicable marine electrical standards for the vessel.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"15A","offer_id":52023025402037,"sku":"QBP412634-V0","price":82.99,"currency_code":"USD","in_stock":true},{"title":"20A","offer_id":52023025434805,"sku":"QBP412634-V4","price":82.99,"currency_code":"USD","in_stock":true},{"title":"30A","offer_id":52023025467573,"sku":"QBP412634-V9","price":82.99,"currency_code":"USD","in_stock":true},{"title":"40A","offer_id":52023025500341,"sku":"QBP412634-V6","price":82.99,"currency_code":"USD","in_stock":true},{"title":"50A","offer_id":52023025533109,"sku":"QBP412634-V1","price":82.99,"currency_code":"USD","in_stock":true},{"title":"60A","offer_id":52023025565877,"sku":"QBP412634-V8","price":82.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333354_qbp412634.jpg?v=1780191627"},{"product_id":"qbp412674","title":"Blue Sea Systems SPDT Remote Control Contura Switch, 20A, IP67, Red Actuator","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Remote Control Contura Switch is an SPDT rocker switch for remote control of Blue Sea Systems ML-Series battery switches, solenoids, and automatic charging relays on marine DC systems. It gives the helm, panel, or equipment bay a labeled control point for switching high-current battery management equipment without mounting the main device in reach.\u003c\/p\u003e\u003cp\u003eThe switch is rated for 20A at 12V DC and 15A at 24V DC, with an 18mA operating current. It uses LED lighting rated to a 100,000-hour half-life, fits a 1.45 in x 0.83 in mounting cutout, and carries an IP67 rating for temporary immersion, which matters on exposed panels and damp boat interiors.\u003c\/p\u003e\u003cp\u003eEach variant uses a red actuator and an SPDT pole and throw layout, with the switch action changing by part number. The range is built for the vibration, shock, thermoshock, moisture, and salt spray that come with service on cruising boats, fishing boats, and workboat electrical panels.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSPDT remote-control Contura rocker switch for Blue Sea Systems ML-Series remote battery switches, ML solenoids, and ML automatic charging relays.\u003c\/li\u003e\n\u003cli\u003e20A maximum operating rating at 12V DC and 15A maximum operating rating at 24V DC.\u003c\/li\u003e\n\u003cli\u003eIP67-rated construction for temporary immersion and better protection on wet or exposed switch panels.\u003c\/li\u003e\n\u003cli\u003eCE marked and meets ISO 8846 and UL 1500 ignition protection requirements for marine electrical installations.\u003c\/li\u003e\n\u003cli\u003eRed actuator with LED lighting rated to a 100,000-hour half-life for panel visibility in low light.\u003c\/li\u003e\n\u003cli\u003e1.45 in x 0.83 in mounting cutout supports clean installation in compatible Contura switch panels.\u003c\/li\u003e\n\u003cli\u003eResistance to vibration, shock, thermoshock, moisture, and salt spray helps the switch hold up in real boat environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Remote Control Contura Switch is offered in three switch-action configurations so the control behavior can match the ML-Series device and panel layout.\u003c\/p\u003e\u003cp\u003eThe shared format across the range is SPDT with a red actuator. The part number determines whether the switch returns to center after use, holds a selected position, or works as a two-position ON-ON control.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2145: Action (ON) OFF (ON). The parentheses indicate momentary ON positions, so the rocker returns to the center OFF position after being pressed.\u003c\/li\u003e\n\u003cli\u003e2146: Action ON-OFF-ON. This version has maintained ON positions on both sides with a center OFF position for circuits that need a held selection.\u003c\/li\u003e\n\u003cli\u003e2155: Action ON-ON. This version has two maintained ON positions and includes a lockout slide to reduce the chance of accidental switching.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eUse this switch where a remote control point is needed for Blue Sea Systems ML-Series battery management hardware. Common mounting locations include a DC distribution panel, helm switch bank, battery control panel, or machinery-space control panel where the switch can be reached and clearly identified.\u003c\/p\u003e\u003cp\u003eMatch the selected variant to the control logic required by the device being operated. The cutout size is 1.45 in high by 0.83 in wide, so the panel opening should be checked before ordering or replacing an existing rocker.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe range is made for use with Blue Sea Systems Contura water-resistant panels and ML-Series remote switching equipment. The 12V and 24V current ratings make it suitable for common marine DC systems, but the final installation should still follow the wiring diagram for the specific ML-Series device being controlled.\u003c\/p\u003e\u003cp\u003eThis is a good fit for boat owners and installers adding remote battery switching, ACR control, or solenoid control where a compact rocker is preferred over a larger control module. It is especially useful when the main battery switch or relay is mounted near the batteries, while the operator needs control from the helm or electrical panel.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"(ON) OFF (ON)","offer_id":52023025598645,"sku":"QBP412674-V0","price":42.99,"currency_code":"USD","in_stock":true},{"title":"ON-OFF-ON","offer_id":52023025631413,"sku":"QBP412674-V9","price":39.99,"currency_code":"USD","in_stock":true},{"title":"ON-ON","offer_id":52023025664181,"sku":"QBP412674-V8","price":43.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333357_qbp412674.jpg?v=1780191627"},{"product_id":"qbp412722","title":"Blue Sea Systems Terminal Feed Through Connector, 250A, 48V DC, IP66","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Terminal Feed Through Connector is a bulkhead pass-through terminal for routing high-current DC cables through hulls, decks, and bulkheads while reducing cable chafe and adding strain relief.\u003c\/p\u003e\u003cp\u003eThis connector is rated IP66, making it suitable for exterior or exposed marine locations where spray, washdowns, and heavy-sea conditions can reach the installation area. The mounting face can be gasketed or bedded to help create a water-tight installation when the cable path passes through a panel or structural surface.\u003c\/p\u003e\u003cp\u003eThe range includes red and black color options, with 5\/16\"-18 or 3\/8\"-16 stud configurations. That gives installers a clean way to bring large DC conductors through a deck, engine-room bulkhead, battery-compartment wall, or equipment panel without simply passing cable through a raw hole.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFeeds high-current cables through hulls, decks, and bulkheads while reducing chafe at the pass-through point.\u003c\/li\u003e\n\u003cli\u003eIP66 rating supports installations exposed to spray, washdowns, and heavy-sea conditions.\u003c\/li\u003e\n\u003cli\u003eMounting face can be gasketed or bedded for a water-tight installation through panels and bulkheads.\u003c\/li\u003e\n\u003cli\u003eAvailable in red and black to support clear DC cable identification on board.\u003c\/li\u003e\n\u003cli\u003eStud options include 5\/16\"-18 and 3\/8\"-16 for matching common high-current cable lugs.\u003c\/li\u003e\n\u003cli\u003eUseful for battery banks, inverter feeds, windlass wiring, DC distribution panels, and other large-cable runs where strain relief matters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations based on color and stud size. The color options help keep positive and negative cable paths visually organized, while the stud size should be matched to the cable lug and system layout.\u003c\/p\u003e\u003cp\u003eAcross the range, the purpose remains the same: a feed-through terminal for high-current cable runs through marine panels, decks, hulls, and bulkheads. The variant differences are limited to the visible color and stud thread configuration.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2201: Black, 5\/16\"-18 studs. The black version suits installations where the pass-through needs to match black DC cabling or negative-side identification.\u003c\/li\u003e\n\u003cli\u003e2202: Red, 5\/16\"-18 studs. The red version suits installations where the pass-through is used with positive-side DC cabling or needs a clear visual warning point.\u003c\/li\u003e\n\u003cli\u003e2203: Black, 3\/8\"-16 studs. This configuration uses the larger stud size while keeping the black color for negative-side or neutral visual organization.\u003c\/li\u003e\n\u003cli\u003e2204: Red, 3\/8\"-16 studs. This configuration combines the larger stud size with red color for positive-side DC cable identification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eMatch the stud size to the cable lug before installation, then confirm that the mounting surface has enough room for the terminal body, cable bend radius, and any gasket or bedding compound used at the face. Large DC cables should be routed so the connector carries strain relief at the pass-through, not the weight or movement of an unsupported cable run.\u003c\/p\u003e\u003cp\u003eTypical mounting locations include battery-compartment bulkheads, engine-room panels, deck penetrations for equipment feeds, and DC distribution areas where a large cable needs to pass cleanly from one side of a structure to the other.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis connector is a practical match for boats that use heavy DC loads such as windlasses, bow thrusters, inverters, chargers, and battery distribution equipment. It is especially useful where a cable penetration must stay tidy, protected from edge wear, and easier to inspect during routine electrical checks.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Black \/ 18","offer_id":52023025696949,"sku":"QBP412722-V2","price":35.99,"currency_code":"USD","in_stock":false},{"title":"Red \/ 18","offer_id":52023025729717,"sku":"QBP412722-V7","price":35.99,"currency_code":"USD","in_stock":false},{"title":"Black \/ 16","offer_id":52023025762485,"sku":"QBP412722-V4","price":39.99,"currency_code":"USD","in_stock":true},{"title":"Red \/ 16","offer_id":52023025795253,"sku":"QBP412722-V8","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333361_qbp412722.webp?v=1780191627"},{"product_id":"qbp414225","title":"Blue Sea Systems DualBus Common BusBar, 100A, 300V AC, 48V DC, #8-32 Screw Terminals, Tin-Plated Copper","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems DualBus 100A BusBar is a compact common bus bar range that places positive and negative distribution on one block for cleaner wiring in a boat electrical system. It is rated for 100A continuous service, with maximum voltage ratings of 300V AC and 48V DC, so it fits common 12V and 24V DC installations while leaving room for systems up to 48V DC.\u003c\/p\u003e\u003cp\u003eEach version uses #8-32 screw terminals and a tin-plated copper CDA 110 \/ UNS 11000 bus, with a UL 94-V0 rated glass-reinforced thermoplastic base. The layout is useful behind helm panels, inside consoles, in cabin electrical lockers, or near grouped equipment where both feed and return connections need to stay organized and easy to inspect.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDualBus layout combines positive and negative buses on one block to reduce wiring clutter in confined marine electrical spaces.\u003c\/li\u003e\n\u003cli\u003e100A continuous rating supports small to mid-size branch circuit distribution points when installed with proper upstream circuit protection.\u003c\/li\u003e\n\u003cli\u003eRated for up to 300V AC and 48V DC, covering common 12V and 24V boat systems.\u003c\/li\u003e\n\u003cli\u003e#8-32 screw terminals provide secure ring-terminal connections, with a specified screw terminal torque of 15 in-lb.\u003c\/li\u003e\n\u003cli\u003eTin-plated copper CDA 110 \/ UNS 11000 bus material supports good conductivity in marine electrical installations.\u003c\/li\u003e\n\u003cli\u003eUL 94-V0 rated glass-reinforced thermoplastic base helps keep the block stable in protected electrical compartments.\u003c\/li\u003e\n\u003cli\u003eCE and UKCA marked for regulated installations where recognized product compliance matters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis DualBus range is offered in two circuit counts, allowing the same basic bus bar format to match different amounts of wiring at the helm, panel, or equipment location.\u003c\/p\u003e\u003cp\u003eBoth variants share the 100A continuous rating, 300V AC and 48V DC maximum voltage ratings, #8-32 screw terminal type, tin-plated copper bus material, UL 94-V0 glass-reinforced thermoplastic base, 15 in-lb terminal torque, and 5\/8 in height.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2701: 5 circuit configuration with 5 screw terminals per bus. Its 1.830 in by 3.012 in footprint works well where only a small group of positive and negative connections needs a tidy landing point.\u003c\/li\u003e\n\u003cli\u003e2702: 10 circuit configuration with 10 screw terminals per bus. Its 1.830 in by 5.060 in footprint gives more termination points for grouped electronics, accessories, or panel wiring in the same area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe mounting holes accept #10 screws, giving the installer a straightforward way to fasten the block to a panel board, backplate, or other protected mounting surface. Keep cable runs supported so vibration is not carried by the terminal screws, and use ring terminals sized for the conductor and the #8-32 screw connection.\u003c\/p\u003e\u003cp\u003eBecause the bus and terminals are accessible, the block should be installed where accidental contact, spray, and loose gear are controlled. In layouts where the terminals may be exposed during normal use or service, a suitable insulating cover should be considered as part of the installation.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis bus bar is meant for organized distribution, not for circuit protection by itself. Feed circuits should be protected by correctly sized fuses or breakers upstream, and conductor sizing should match the load, run length, temperature conditions, and the vessel's electrical standards.\u003c\/p\u003e\u003cp\u003eFor boat owners refitting a helm panel, adding electronics, or cleaning up scattered accessory wiring, the DualBus format keeps the positive and negative sides close together without mixing them. That makes later troubleshooting easier because both sides of each circuit can be traced in the same area.\u003c\/p\u003e\u003ch6\u003eMaterials and maintenance\u003c\/h6\u003e\u003cp\u003eThe tin-plated copper bus material helps maintain conductivity in the marine environment when the installation is kept dry and protected. During seasonal service, check that terminal screws remain properly tightened, look for corrosion or heat discoloration, and confirm that conductors are strain relieved and not pulling against the screw terminals.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"5 Circuit","offer_id":52023026614453,"sku":"QBP414225-V5","price":29.99,"currency_code":"USD","in_stock":true},{"title":"10 Circuit","offer_id":52023026647221,"sku":"QBP414225-V4","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333365_qbp414225.jpg?v=1780191628"},{"product_id":"qbp415566","title":"Blue Sea Systems DualBus Plus 150A BusBar, 5 Gang, #10-32 Screw Terminals","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems DualBus Plus is a dual busbar that combines positive and negative distribution on one block, giving small marine electrical upgrades a cleaner termination point without adding separate busbars. It is rated for 150A DC and 130A AC, with maximum voltage ratings of 48V DC and 300V AC.\u003c\/p\u003e\u003cp\u003eEach bus has five #10-32 screw terminals and two terminal studs, so it works well as a central connection point for electronics, lighting, pumps, stereo equipment, and other branch circuits where positive and negative wiring need to stay organized. A clear polycarbonate snap-on cover helps protect the terminals and meets USCG and ABYC insulation requirements.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCombines positive and negative buses on one block to reduce wiring clutter in compact marine electrical panels.\u003c\/li\u003e\n\u003cli\u003eFive #10-32 screw terminals per bus give multiple branch circuits a tidy termination point.\u003c\/li\u003e\n\u003cli\u003eTwo terminal studs per bus support larger feed or return connections, with stud size depending on the selected variant.\u003c\/li\u003e\n\u003cli\u003e150A DC continuous rating supports common accessory distribution layouts on 12V and 24V boats, within the 48V DC maximum rating.\u003c\/li\u003e\n\u003cli\u003eTin-plated copper bus material helps maintain good conductivity in damp marine environments.\u003c\/li\u003e\n\u003cli\u003eUL 94-V0 rated glass-reinforced thermoplastic base adds insulation and structure for onboard electrical installations.\u003c\/li\u003e\n\u003cli\u003eClear polycarbonate cover snaps over the block and meets USCG and ABYC insulation requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two stud configurations for matching the main cable lugs and hardware used in the boat’s electrical system.\u003c\/p\u003e\u003cp\u003eThe screw-terminal layout, bus function, 150A DC rating, 48V DC maximum rating, clear cover, and five-terminal-per-bus arrangement remain the same across these configurations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2723: 5\/16 in-18 stud version. This configuration suits installations where the main positive and negative cable lugs are sized for 5\/16 in studs.\u003c\/li\u003e\n\u003cli\u003e2722: 1\/4 in-20 stud version. This configuration suits installations where the main positive and negative cable lugs are sized for 1\/4 in studs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the block in a dry, accessible electrical area such as behind a distribution panel, inside a console, or near a battery switch and accessory fuse block. The base uses #10 or M5 mounting screws, and the cover should remain accessible so connections can be inspected without disturbing the wiring layout.\u003c\/p\u003e\u003cp\u003eUse properly crimped marine terminals, match lug size to the selected stud version, and torque the screw terminals and studs to the specified values for the variant being installed. This helps avoid loose connections caused by vibration and repeated heating and cooling cycles on board.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe DualBus Plus is a good match for boats that need a compact positive and negative distribution point for electronics and accessory wiring. It is useful during refits or add-ons where new equipment such as chartplotters, radios, pumps, lighting circuits, or USB chargers needs a cleaner connection point than stacking conductors on one battery or switch terminal.\u003c\/p\u003e\u003cp\u003eBecause the main difference between the variants is stud size, the key fit check is the terminal lug hardware already planned for the main feed and return cables. The 2723 uses 5\/16 in-18 studs, while the 2722 uses 1\/4 in-20 studs.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"20 Stud","offer_id":52023026679989,"sku":"QBP415566-V6","price":42.99,"currency_code":"USD","in_stock":true},{"title":"18 Stud","offer_id":52023026712757,"sku":"QBP415566-V0","price":48.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333369_qbp415566.jpg?v=1780191629"},{"product_id":"qbp416140","title":"Blue Sea Systems CableCap Stud Insulator, PVC, Single Stud","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems CableCap is a PVC stud insulator for covering a single exposed termination stud on boat electrical equipment. It is made for stud-type connectors on alternators, starters, windlasses, and other high-amperage termination points where an uncovered live post can be a problem in tight electrical spaces.\u003c\/p\u003e\u003cp\u003eThis CableCap range covers multiple stud and cable sizes, with red and black versions available for installations that use color separation around DC positive and negative circuits. Across the family, the listed cable sizes run from 18 AWG through 4\/0 AWG, so the correct variant should be matched to the terminal, cable size, and stud diameter being protected.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eInsulates a single stud-type connector on alternators, starters, windlasses, and other high-amperage devices.\u003c\/li\u003e\n\u003cli\u003ePVC construction gives the cap a practical insulating body for marine DC electrical installations.\u003c\/li\u003e\n\u003cli\u003eRed and black color options support clear visual separation in electrical lockers, battery compartments, and engine spaces.\u003c\/li\u003e\n\u003cli\u003eVariant range covers cable sizes from 18 AWG to 4\/0 AWG, depending on the selected cap.\u003c\/li\u003e\n\u003cli\u003eStud size options include 0.47 to 0.13, 0.70 to 0.30, 0.50, and 1.25 to 0.70, allowing the cap to be matched to the termination point rather than forced onto the wrong hardware.\u003c\/li\u003e\n\u003cli\u003eUseful for reducing accidental contact with exposed high-current studs in crowded marine electrical areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe CableCap range varies by color and by the stud size range it is meant to cover. Red and black versions are available across the common size groups, which helps keep the installation easy to identify after panels, covers, or battery cables are reinstalled.\u003c\/p\u003e\u003cp\u003eThe variants also differ by cable size coverage, with smaller caps for 18 to 10 AWG and 8 to 4 AWG wiring, mid-size caps for 2 to 2\/0 AWG wiring, and larger caps for 3\/0 to 4\/0 AWG wiring. Match the cap to the actual stud and cable size on the alternator, starter, windlass, bus connection, or other high-current termination before installation.\u003c\/p\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eCheck the terminal stack before fitting the cap, especially where a lug, washer, nut, and additional hardware share the same stud. The cap should cover the exposed conductor area without putting strain on the cable or interfering with the tightened connection.\u003c\/p\u003e\u003cp\u003eOn boats, these caps are most often used in spaces where tools, loose gear, battery boxes, or nearby metalwork could contact a live stud. They are a simple fit-and-protect item for DC refits, battery cable upgrades, windlass wiring, engine-room service work, and cleanup of exposed high-current posts.\u003c\/p\u003e\u003ch6\u003eCompatibility and use on board\u003c\/h6\u003e\u003cp\u003eThis product is a good match for boat owners, installers, and service technicians working around high-current DC terminations that need a cleaner and safer insulated finish. It is not a network connector or a voltage-specific electronic component, so fit is determined by the physical stud, terminal, and cable size rather than by NMEA compatibility or 12V versus 24V system voltage.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Black \/ 0.47 to 0.13","offer_id":52023026876597,"sku":"QBP416140-V2","price":5.99,"currency_code":"USD","in_stock":true},{"title":"Red \/ 0.47 to 0.13","offer_id":52023026909365,"sku":"QBP416140-V8","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 0.70 to 0.30","offer_id":52023026942133,"sku":"QBP416140-V6","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Red \/ 0.70 to 0.30","offer_id":52023026974901,"sku":"QBP416140-V0","price":4.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 0.50","offer_id":52023027007669,"sku":"QBP416140-V3","price":7.99,"currency_code":"USD","in_stock":true},{"title":"Red \/ 0.50","offer_id":52023027040437,"sku":"QBP416140-V9","price":7.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 1.25 to 0.70","offer_id":52023027073205,"sku":"QBP416140-V4","price":8.99,"currency_code":"USD","in_stock":true},{"title":"Red \/ 1.25 to 0.70","offer_id":52023027105973,"sku":"QBP416140-V5","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333371_qbp416140.jpg?v=1780191629"},{"product_id":"qbp787017","title":"Blue Sea Systems 360 12 Position DC Branch Circuit Breaker Panel, 12V, 120A, Analog Voltmeter, Square Format","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1464 is a 12-position DC switch and circuit breaker panel with an analog voltmeter, built for 12V systems and rated for up to 120A when the feed protection and wire size are matched to the load.\u003c\/p\u003e\u003cp\u003eIt combines twelve ON-OFF rocker switches with twelve 10A push-button reset circuit breakers, and the meter uses a selector switch to check voltage on as many as three battery banks. The panel measures 7.75 in high by 9.25 in wide with 3.50 in of depth, which makes it a practical fit for a helm console, cabin bulkhead, or nav station where you want switching, branch protection, and voltage checks in one place.\u003c\/p\u003e\u003cp\u003eThis layout works well on boats that need a clean 12V distribution point for multiple house and helm circuits without spreading switches, breakers, and battery monitoring across separate locations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12 switched and protected DC branch circuits in one panel for a 12V electrical system\u003c\/li\u003e\n\u003cli\u003eBuilt-in analog voltmeter with an 8 to 16V DC range\u003c\/li\u003e\n\u003cli\u003eSelector switch lets you monitor voltage on up to three battery banks\u003c\/li\u003e\n\u003cli\u003eSupplied with twelve 10A push-button reset quick-connect circuit breakers\u003c\/li\u003e\n\u003cli\u003eSupplied with twelve SPST ON-OFF rocker switches\u003c\/li\u003e\n\u003cli\u003eMaximum panel amperage of 120A when the installation is wired and protected correctly\u003c\/li\u003e\n\u003cli\u003ePanel size of 7.75 in x 9.25 in with 3.50 in mounting depth\u003c\/li\u003e\n\u003cli\u003eIncludes a square-format DC label kit for circuit identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis panel is for 12V DC distribution, so it suits boats that need a central point for lights, electronics, pumps, and other branch circuits on a 12V house or helm system. The built-in meter is useful when you want to compare battery-bank voltage at the panel instead of adding a separate meter elsewhere on the boat.\u003c\/p\u003e\u003cp\u003eBecause this panel is not waterproof, it belongs in a mounting location that stays dry and protected rather than an exposed dash, open cockpit surface, or other area that takes direct washdown. The 120A panel rating depends on proper main feed protection and wire sizing, so overall circuit planning still matters before installation.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe supplied breakers are 10A reset-only units, which is convenient when many branch circuits on the boat share that protection level. Breaker values can be changed when the actual circuit design calls for different protection, and the included label kit helps keep each switched circuit easy to identify after wiring is complete.\u003c\/p\u003e\u003cp\u003eThis panel is a good match for owners replacing an older square DC panel or building a new 12V distribution point for a cruiser, center console, or workboat with several switched loads and a need to keep an eye on battery voltage from the helm or interior panel.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12 x 7054 push-button reset only quick-connect circuit breakers, 10A\u003c\/li\u003e\n\u003cli\u003e12 x 7480 SPST ON-OFF rocker switches\u003c\/li\u003e\n\u003cli\u003e1 x 8003 DC analog voltmeter, 8 to 16V DC\u003c\/li\u003e\n\u003cli\u003e1 x 4205 Basic DC Label Kit with 30 black square labels\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023027204277,"sku":"QBP787017","price":624.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329787_qbp787017.jpg?v=1780191629"},{"product_id":"qbp496395","title":"Blue Sea Systems DC 12 Volt Socket Panel, for 360 Panel System, Dual 12V Sockets, 15A Max Per Socket","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1472 is a DC 12V socket panel with two 12V outlets, each rated for up to 15A. It gives you a clean way to add accessory power at the helm, inside the cabin, or at another panel location where plug-in 12V gear is used on board.\u003c\/p\u003e\u003cp\u003eThis panel measures 4.75 in high, 4.88 in wide, and 1.50 in deep. That footprint works well where space behind the mounting surface is limited but two accessory sockets are still needed in one place.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo 12V DC sockets grouped in one panel\u003c\/li\u003e\n\u003cli\u003e15A maximum rating per socket for common 12V accessories\u003c\/li\u003e\n\u003cli\u003ePanel dimensions of 4.75 x 4.88 x 1.50 in for space-conscious installations\u003c\/li\u003e\n\u003cli\u003eKeeps accessory power centralized for chargers, handheld GPS units, portable fans, spotlights, and other 12V plug-in equipment\u003c\/li\u003e\n\u003cli\u003eSuited to boats that need more than one 12V outlet without adding multiple separate socket mounts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis socket panel is intended for 12V DC systems. It is a practical match for boats that use standard 12V accessory plugs and need two outlets in the same dash, console, or cabin panel area.\u003c\/p\u003e\u003cp\u003eBefore ordering, compare the panel dimensions with your available mounting space and check behind-panel clearance against the 1.50 in depth. That is especially useful on smaller helms, compact bulkheads, and refit projects where space is already tight.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward when you already have a 12V accessory feed planned. Wiring and circuit protection should be sized for the actual connected load, and the 15A limit for each socket should be respected when selecting plug-in equipment.\u003c\/p\u003e\u003cp\u003eKeeping both outlets in one panel location can also make day-to-day use easier, especially when you routinely power more than one portable device from the same area of the boat.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis panel makes sense for owners who still rely on 12V plug-in accessories rather than USB-only charging. It fits well on fishing boats, center consoles, cruisers, and sailboats where portable electronics and small 12V devices need a nearby power point.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023027237045,"sku":"QBP496395","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329897_qbp496395.jpg?v=1780191630"},{"product_id":"qbp711839","title":"Blue Sea Systems AC Panel Extended 120 Label Set, Weatherproof, For Contura Waterproof Fuse Panels and ST Glass Fuse Blocks","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8067 is an extended 120-label set for AC distribution panels and related panel hardware on board. It includes 120 AC labels, and the labels are the large Blue Sea format at about 1.438 x 0.438 inches, which gives clear, readable circuit marking across a busy panel.\u003c\/p\u003e\u003cp\u003eThis set is meant for AC circuits rather than 12V or 24V DC labeling, so it fits the part of the boat handling shore power, inverter-fed AC loads, outlets, lighting, appliances, and similar branch circuits. It is used on Contura Waterproof Fuse Panels, ST Glass Fuse Blocks, and all raised rocker and toggle circuit breaker panels, which makes it a practical match when you are updating an existing Blue Sea panel or finishing a new AC layout.\u003c\/p\u003e\u003cp\u003eClear panel labels matter most when you are tracing faults, isolating a load at the dock, or handing the boat over to crew or a service technician. A larger set like this also helps on boats with more than a few AC circuits, where a basic label kit usually runs out of useful legends.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e120 AC labels for a wide range of onboard branch circuits and panel functions\u003c\/li\u003e\n\u003cli\u003eReinforced, weatherproof label material for panel areas that see moisture and regular wipe-downs\u003c\/li\u003e\n\u003cli\u003eLarge-format labels sized about 1.438 x 0.438 inches for clear circuit identification\u003c\/li\u003e\n\u003cli\u003eFits Contura Waterproof Fuse Panels\u003c\/li\u003e\n\u003cli\u003eFits ST Glass Fuse Blocks\u003c\/li\u003e\n\u003cli\u003eFits all raised rocker and toggle circuit breaker panels\u003c\/li\u003e\n\u003cli\u003eCovers common AC panel labels for shore power, outlets, lighting, galley loads, charger or inverter circuits, and other cabin systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis label set makes the most sense when your boat already uses Blue Sea large-format panel labels and you need AC-specific legends beyond a smaller starter kit. The included label names cover many of the circuits found on cruising boats, sportfish boats, trawlers, and larger sailboats with shore power service, multiple cabin zones, galley appliances, and inverter or charger equipment.\u003c\/p\u003e\u003cp\u003eBecause it is built around AC circuit naming, it helps keep the panel easy to read when the boat has separate AC and DC sections. That is especially useful on mixed systems where fast identification matters during troubleshooting, load management, or routine breaker switching.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eApplication is straightforward as long as the receiving panel or block uses the Blue Sea large-label format. Clean the mounting surface first, line up each label with the breaker or switch it belongs to, and keep the wording consistent across the full panel so the AC side reads clearly at a glance. This is a good fit for refits, panel cleanups, or final labeling after adding new AC loads on board.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023027269813,"sku":"QBP711839","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329867_qbp711839.jpg?v=1780191630"},{"product_id":"qbp510193","title":"Blue Sea Systems Circuit Breaker Panel Backlight System, 10 Position, 12\/24V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8069 is a 10-position backlight system for compatible Blue Sea Systems circuit breaker panels. It runs on 12V or 24V DC systems, uses two 6 inch 18 AWG wire leads for connection, and is rated for a maximum of 24V DC.\u003c\/p\u003e\u003cp\u003eThis is a straightforward way to light panel labels so breaker positions stay readable when the cabin is dark, the helm is running at night, or the electrical panel sits in a lower compartment with limited ambient light. Reverse polarity protection is built in, which helps prevent damage if the supply leads are connected incorrectly during installation.\u003c\/p\u003e\u003cp\u003eFor boat owners updating a DC distribution panel, this part matters most when fit and wiring are the main questions. It is intended for Blue Sea Systems circuit breaker panels, so it should be matched to a panel layout that accepts this 10-position backlight format before ordering.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10-position backlighting layout for circuit breaker panel labels\u003c\/li\u003e\n\u003cli\u003eBuilt for use with compatible Blue Sea Systems circuit breaker panels\u003c\/li\u003e\n\u003cli\u003eWorks with 12V and 24V DC electrical systems\u003c\/li\u003e\n\u003cli\u003eTwo 6 inch 18 AWG wire leads for power connection\u003c\/li\u003e\n\u003cli\u003eReverse polarity protection is built in\u003c\/li\u003e\n\u003cli\u003eMaximum voltage rating of 24V DC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis unit is meant for Blue Sea Systems circuit breaker panels rather than as a universal panel light. The main fit check is panel compatibility and position count, since this version is laid out for 10 positions. On a boat with an existing Blue Sea panel, that makes it easier to confirm whether the backlight will line up with the breaker label area and connect without extra adaptation.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePower is supplied through two 18 AWG leads, each 6 inches long, so installation is usually simplest when a 12V or 24V DC feed is already available close to the panel. Reverse polarity protection adds a useful margin during refit work, especially when access behind the panel is tight and wiring is being completed in place.\u003c\/p\u003e\u003cp\u003eBecause this is a panel component, it makes the most sense in installations where label visibility matters during night operation or low-light checks at the dock. That can include cruising boats, fishing boats, and sailboats with the DC panel mounted below deck or away from direct cabin lighting.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023027302581,"sku":"QBP510193","price":34.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329868_qbp510193.jpg?v=1780191631"},{"product_id":"qbp812220","title":"Blue Sea Systems A-Series Single Blank Mounting Panel, for Single-Pole Toggle Circuit Breakers, 1\/8 in 5052 Aluminum","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8072 is a single-position A-Series mounting panel for a single pole toggle circuit breaker, not a breaker itself. It measures 2-5\/8 in. wide by 3-3\/4 in. high and uses 1\/8 in. aluminum 5052 alloy, so it fits neatly where you need one breaker location without moving to a larger multi-position panel.\u003c\/p\u003e\u003cp\u003eThis panel is a practical match for custom DC panel work at the helm, nav station, or another protected interior mounting area where you want one breaker in a clean, finished opening. The slate gray face matches standard Blue Sea Systems panel color, and the recessed area accepts the large-format panel label so the finished panel is easier to identify and keep organized.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSingle-position mounting panel sized for Blue Sea Systems A-Series single pole toggle circuit breakers\u003c\/li\u003e\n\u003cli\u003e1\/8 in. aluminum 5052 alloy panel for a rigid mounting surface\u003c\/li\u003e\n\u003cli\u003e2-5\/8 in. x 3-3\/4 in. footprint works well when panel space is limited\u003c\/li\u003e\n\u003cli\u003eSlate gray finish matches standard Blue Sea Systems panel color\u003c\/li\u003e\n\u003cli\u003eRecess accepts Blue Sea Systems large-format panel labels for clear circuit marking\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis piece is meant for A-Series single pole toggle breaker installations where you want a dedicated panel opening for one circuit. It is useful when replacing a worn single-breaker panel, adding one protected branch circuit to an existing setup, or keeping a custom electrical panel layout consistent with other Blue Sea Systems panel components.\u003c\/p\u003e\u003cp\u003eBecause this is the panel only, it should be matched with the correct A-Series breaker and label for the circuit you are building. Checking the cutout location, rear clearance, and the breaker you plan to mount will help avoid rework once wiring is in place.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eOn a boat, this panel makes sense anywhere a single switched and protected circuit needs its own spot, such as electronics, pumps, or a dedicated accessory feed. It is a good match for owners and installers building out a tidy DC panel one circuit at a time, especially when the goal is to keep the finished face uniform with existing Blue Sea Systems hardware.\u003c\/p\u003e\u003cp\u003eThe aluminum panel is straightforward to fasten into a dash, switch area, or interior electrical panel where the surface is flat and well supported. In exposed locations, normal marine practice still applies: use suitable sealing, corrosion-conscious fasteners, and wiring support so the breaker and panel stay secure under vibration.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023027335349,"sku":"QBP812220","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329869_qbp812220.webp?v=1780191631"},{"product_id":"qbp909670","title":"Blue Sea Systems Dual Battery Bank Management Panel, 32V DC, 300A, 2 m-Series ON\/OFF Switches, 100A Circuit Breaker, Ignition Protected","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8080 is a dual battery bank management panel for boats that need separate control of the engine start bank and the house bank from one location. It combines two ON\/OFF battery switches with a 100A flat rocker breaker, and it is rated for DC systems up to 32V with 300A continuous capacity, 500A for 5 minutes, and cranking loads up to 1500A for 10 seconds.\u003c\/p\u003e\u003cp\u003eThis layout keeps the engine circuit isolated from the house circuit, which helps protect the start battery from being drained by house loads and helps reduce the voltage sags and spikes that can affect electronics during engine cranking. It also allows an emergency cross-connect between the isolated battery banks when one side needs support.\u003c\/p\u003e\u003cp\u003eFor many boats with separate start and house batteries, this panel makes day to day switching easier to understand and easier to service later. It is also ignition protected, so it can be installed aboard gasoline-powered boats where that detail matters.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDual-bank management panel that separates engine start and house circuits\u003c\/li\u003e\n\u003cli\u003eRated for DC systems up to 32V with 300A continuous load handling\u003c\/li\u003e\n\u003cli\u003eHandles 500A for 5 minutes and 1500A cranking load for 10 seconds\u003c\/li\u003e\n\u003cli\u003eBuilt-in 100A main breaker for house-side circuit protection\u003c\/li\u003e\n\u003cli\u003eEmergency cross-connect capability between isolated battery banks\u003c\/li\u003e\n\u003cli\u003eHelps shield onboard electronics from voltage swings during engine starting\u003c\/li\u003e\n\u003cli\u003eIgnition protected for installation aboard gasoline-powered boats\u003c\/li\u003e\n\u003cli\u003eCompact panel size of 6.50 in x 5.25 in with 3.00 in depth for planning the mounting space\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis panel suits boats that use dedicated battery banks for starting and house loads instead of running everything through a single bank. It works well where the owner wants battery switching and main protection grouped on one panel rather than spread across separate components.\u003c\/p\u003e\u003cp\u003eThe 6.50 inch height, 5.25 inch width, and 3.00 inch depth are worth checking before installation, especially in helm consoles, electrical lockers, or bulkheads where heavy battery cables need enough bend radius and clear access to the switch knobs and breaker.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe separate switch layout makes it easier to isolate one bank for service, storage, or troubleshooting without shutting down the other side of the system. On boats with a start battery and a house battery bank, that usually means cleaner operation when the engine circuit needs to stay ready while cabin and accessory loads are managed on their own side.\u003c\/p\u003e\u003cp\u003eThis is a strong match for powerboats and sailboats that carry electronics, pumps, lighting, refrigeration, or other house loads and still want the start battery kept apart from those demands. It also makes sense in gasoline-powered installations where ignition protection is part of the installation checklist.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo m-Series mini ON\/OFF battery switches with red knobs\u003c\/li\u003e\n\u003cli\u003eOne C-Series flat rocker circuit breaker, single pole, 100A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023027368117,"sku":"QBP909670","price":351.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329759_qbp909670.jpg?v=1780191632"},{"product_id":"qbp900789","title":"Blue Sea Systems C-Series Plug Panel Kit, 1\/8 in 5052 Aluminum, Slate Gray Finish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8089 is a C-Series plug panel kit for closing or customizing a position on a Blue Sea C-Series toggle circuit breaker panel. The panel plug is made from heavy 1\/8\" 5052 aluminum and finished in slate gray with a two-part polyurethane coating, and it accepts standard Blue Sea Systems backlight labels and \"ON\" indication LEDs.\u003c\/p\u003e\u003cp\u003eThis kit is used when a panel opening needs to stay clean and finished during a refit, a repair, or a staged electrical build. It works with Blue Sea Systems 8087 and 8088 C-Series panels, so it fits neatly into the same panel layout instead of leaving an exposed cutout.\u003c\/p\u003e\u003cp\u003eIt is a good match for boat owners and installers tidying up a helm, cabin, or service panel where one breaker space is being reserved for later use. The included hardware and blank label also make it easier to keep the panel organized and readable from the start.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for Blue Sea Systems C-Series toggle circuit breaker panel layouts\u003c\/li\u003e\n\u003cli\u003eWorks with Blue Sea Systems 8087 and 8088 panels\u003c\/li\u003e\n\u003cli\u003ePanel plug is built from heavy 1\/8\" 5052 aluminum\u003c\/li\u003e\n\u003cli\u003eSlate gray two-part polyurethane finish matches the look of C-Series panels\u003c\/li\u003e\n\u003cli\u003eAccepts standard Blue Sea Systems backlight labels for circuit identification\u003c\/li\u003e\n\u003cli\u003eAccepts standard Blue Sea Systems \"ON\" indication LEDs\u003c\/li\u003e\n\u003cli\u003eLets you close an unused panel position while keeping the layout ready for future circuit changes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a panel accessory for Blue Sea Systems C-Series toggle breaker installations, not a circuit breaker by itself. It is intended for panel positions that need a clean blanking plug and a matching finish, while still allowing the same style of labeling and LED indication used across the rest of the panel.\u003c\/p\u003e\u003cp\u003eFor buyers checking fit before ordering, the main point is panel family compatibility. This kit is for C-Series panel applications and is listed for use with Blue Sea Systems 8087 and 8088 panels.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe kit includes the mounting screws needed to secure the panel plug, along with the LED plug and a blank label. That makes it a straightforward option when replacing a missing plug, cleaning up an older panel, or leaving a breaker position unused until a later system expansion.\u003c\/p\u003e\u003cp\u003eOn a boat, this kind of detail matters most at the helm or distribution panel where spare openings can collect dirt, look unfinished, or make the panel harder to read. Using a matching plug keeps the panel face consistent and leaves room for a later circuit addition without reworking the whole panel.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCircuit breaker mounting screws\u003c\/li\u003e\n\u003cli\u003eC-Series panel plug\u003c\/li\u003e\n\u003cli\u003eLED plug\u003c\/li\u003e\n\u003cli\u003eBlank label\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023027400885,"sku":"QBP900789","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329870_qbp900789.jpg?v=1780191632"},{"product_id":"qbp627643","title":"Blue Sea Systems Mini Clamp Multimeter, AC\/DC, 400A, 600V, True RMS","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8110 is a mini clamp multimeter for checking AC and DC current without opening the circuit, with auto-ranging measurement from 0.01 to 400 A and 0.001 to 600 V. It gives you a fast way to track down charging, inverter, shore power, and DC load issues on board while keeping the conductor intact and your hands off live terminals.\u003c\/p\u003e\u003cp\u003eTrue RMS reading is useful when you are checking inverter output, and the 30 mm clamp opening works for many single-conductor runs found behind panels, near chargers, and around battery banks. A 4300-count display, data hold, resistance and continuity functions, and included test leads make it a useful meter to keep in the boat's electrical kit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMeasures AC and DC current through the clamp so you can check load and charging current without disconnecting the wire\u003c\/li\u003e\n\u003cli\u003eAuto-ranging meter covers 0.01 to 400 A and 0.001 to 600 V for both marine AC and DC troubleshooting\u003c\/li\u003e\n\u003cli\u003eTrue RMS readings help when checking inverter-fed AC circuits\u003c\/li\u003e\n\u003cli\u003e30 mm clamp opening helps when working around individual conductors in panels and wiring runs\u003c\/li\u003e\n\u003cli\u003e4300-count digital display and data hold make readings easier to capture in lockers, engine spaces, and behind panels\u003c\/li\u003e\n\u003cli\u003eResistance and continuity functions add fault-finding capability beyond current measurement\u003c\/li\u003e\n\u003cli\u003eAuto power-off after 10 minutes, low-battery indicator, and included test leads support routine service work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis meter is a good match for boat owners, installers, and service techs who work on 12V or 24V DC systems and also need to check AC equipment such as battery chargers, shore power-fed circuits, and inverter output. It is especially helpful when you need a current reading in a tight space and do not want to break a connection just to test one conductor.\u003c\/p\u003e\u003ch6\u003eHandling and storage\u003c\/h6\u003e\u003cp\u003eThe compact body is easier to use one-handed in console cavities, under berth access panels, and around crowded electrical installations. It operates from 0 to 50 C and below 80% relative humidity with no condensation, so it belongs in a dry tool bag or service locker when the job is done.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023027433653,"sku":"QBP627643","price":287.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329852_qbp627643.jpg?v=1780191632"},{"product_id":"qbp750098","title":"Blue Sea Systems Traditional Metal DC Panel, 5 Positions, 12V, 50A, Dual USB Charger, 12V Dash Socket","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8120 is a traditional metal DC breaker panel for 12V systems with five branch circuit positions, a maximum panel amperage of 50A, a built-in 12V dash socket, and a dual USB charger rated at 4.8A. It gives you one compact panel for splitting power from a higher-amperage feed into smaller onboard circuits while keeping charging access at the helm or inside the cabin.\u003c\/p\u003e\u003cp\u003eAll positive, negative, and grounding buses are already installed and the panel comes pre-wired, which helps when replacing an older panel or adding a second distribution point in a small electrical layout. ON-indicating LEDs at each circuit and backlit labels make it easier to see what is live when you are troubleshooting after dark or checking loads in low cabin light.\u003c\/p\u003e\u003cp\u003eThis panel can be used as an extension to an existing panel or as a compact replacement where space is limited. Its 7.5 x 5.25 x 2.5 in footprint works well in helm consoles, nav stations, and other protected mounting areas where a full-size panel would be harder to fit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFive breaker-protected branch circuit positions on a 12V DC panel with 50A maximum panel amperage\u003c\/li\u003e\n\u003cli\u003eIntegrated dual USB charger rated at 4.8A plus a 12V dash socket for phones, tablets, handheld electronics, and other 12V accessories\u003c\/li\u003e\n\u003cli\u003eMagnetic-hydraulic trip-free breaker protection with an ON-indicating LED at every circuit position\u003c\/li\u003e\n\u003cli\u003ePositive, negative, and grounding buses are installed and pre-wired, so the panel is quicker to wire into a refit or new branch circuit layout\u003c\/li\u003e\n\u003cli\u003eBacklit circuit labels help identify switched loads in low light at the helm or below deck\u003c\/li\u003e\n\u003cli\u003eCompact 7.5 x 5.25 x 2.5 in panel size for boats where panel space is tight\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBecause the buses, breakers, charge points, and circuit indication hardware are already integrated, there is less loose hardware to source before installation starts. That can simplify a clean panel upgrade on a 12V boat where you want organized branch protection and charging access in the same spot.\u003c\/p\u003e\u003cp\u003eThis is a strong fit for owners rigging a small to mid-size boat with a handful of switched DC circuits and a regular need to charge personal electronics underway. It also makes sense where a second panel is useful near the helm instead of routing every accessory back to a larger main distribution panel.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTraditional metal DC panel assembly\u003c\/li\u003e\n\u003cli\u003eDual USB charger module\u003c\/li\u003e\n\u003cli\u003e12V dash socket with watertight cap\u003c\/li\u003e\n\u003cli\u003eFive 15A single-pole circuit breakers\u003c\/li\u003e\n\u003cli\u003eFive amber circuit indicator LEDs\u003c\/li\u003e\n\u003cli\u003ePanel label set\u003c\/li\u003e\n\u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023027466421,"sku":"QBP750098","price":813.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329871_qbp750098.webp?v=1780191632"},{"product_id":"qbp898130","title":"Blue Sea Systems A-Series Double Blank Mounting Panel, For Double Pole Toggle Circuit Breakers, 1\/8 in 5052 Aluminum","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8173 is an A-Series double blank mounting panel for A-Series double pole toggle circuit breakers. It is made from 1\/8\" aluminum 5052 alloy and measures 2.63\" wide by 3.75\" high, giving you a compact mounting point that fits this breaker format without looking out of place on a marine electrical panel.\u003c\/p\u003e\u003cp\u003eThe slate gray finish matches standard Blue Sea panel color, and the face accepts Blue Sea Systems large format panel labels so circuit identification stays clear and easy to read. This matters on boats where a breaker panel may be checked quickly underway, at the dock, or during service work.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBuilt for A-Series double pole toggle circuit breakers, so the panel opening matches this breaker style rather than a general switch cutout.\u003c\/li\u003e\n\u003cli\u003e1\/8\" aluminum 5052 alloy gives the breaker a rigid mounting surface suited to marine panel work.\u003c\/li\u003e\n\u003cli\u003eSlate gray finish blends with standard Blue Sea panel color for a consistent panel face.\u003c\/li\u003e\n\u003cli\u003eAccepts Blue Sea Systems large format panel labels for straightforward circuit marking.\u003c\/li\u003e\n\u003cli\u003eCompact 2.63\" x 3.75\" face size helps when panel space is limited.\u003c\/li\u003e\n\u003cli\u003ePanel layout accepts Blue Sea Systems LED indicators used for functions such as power on or reverse polarity indication.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis panel is intended for installations that use the A-Series double pole toggle breaker footprint. It makes the most sense when the rest of the electrical system already uses Blue Sea A-Series toggle breakers and matching labels. It is not a universal trim plate for unrelated breaker or switch openings.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFor refits and service work, this panel gives you a neat faceplate for mounting a breaker on a vertical surface where a clean breaker presentation matters. Before cutting or replacing a panel section, check the available face space against the 2.63\" by 3.75\" dimensions and leave room for labels and any indicator lights used in the panel layout.\u003c\/p\u003e\u003cp\u003eThis is a practical choice for boats that need an added breaker position or a replacement mounting panel that keeps the electrical panel easy to read and easy to service.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023027499189,"sku":"QBP898130","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329872_qbp898130.webp?v=1780191633"},{"product_id":"qbp429508","title":"Blue Sea Systems Push Button Panel Switch, For A-Series Toggle Circuit Breaker Panels, SPST, OFF-(ON), For Standard 5\/8 in Mounting Hole","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8200 is a momentary push-button panel switch with an OFF-(ON) action for circuits that need a spring-return press function instead of a maintained ON-OFF switch. It is a single pole, single throw switch rated for 6A at 125V AC, 3A at 250V AC, and 6A at 32V DC, which makes it suitable for many common control functions on board.\u003c\/p\u003e\u003cp\u003eThis switch fits Blue Sea Systems A-Series toggle circuit breaker panel apertures and is supplied with a mounting adapter for a standard 5\/8 in circuit breaker mounting hole. The body uses nickel-plated brass and phenolic non-corrosive construction, and the electrical connection is made through a 0.25 in quick-connect tab terminal.\u003c\/p\u003e\u003cp\u003eOn a boat, this type of switch is commonly used where the circuit should stay off until the button is pressed, such as a horn, wiper, bilge pump control, generator start circuit, or certain engine control functions. The white actuator keeps the control easy to identify on a busy panel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMomentary OFF-(ON) push-button action for press-and-release control\u003c\/li\u003e\n\u003cli\u003eSPST switch format for simple single-circuit switching\u003c\/li\u003e\n\u003cli\u003eRated for 6A at 125V AC, 3A at 250V AC, and 6A at 32V DC\u003c\/li\u003e\n\u003cli\u003eFits Blue Sea Systems A-Series toggle circuit breaker panel apertures\u003c\/li\u003e\n\u003cli\u003eIncludes mounting adapter for standard 5\/8 in circuit breaker mounting holes\u003c\/li\u003e\n\u003cli\u003eNickel-plated brass and phenolic construction that resists corrosion in marine service\u003c\/li\u003e\n\u003cli\u003e0.25 in quick-connect tab terminal for straightforward panel wiring\u003c\/li\u003e\n\u003cli\u003eWhite actuator is easy to spot on helm, cabin, or machinery-space panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis switch is a good match when your panel already uses Blue Sea Systems toggle type circuit breaker openings and you need a push-button control in the same footprint. It is not a maintained ON-OFF switch, so it should be used where a momentary contact is the correct function for the circuit.\u003c\/p\u003e\u003cp\u003eFor retrofit work, the included adapter helps when the panel has a standard 5\/8 in circuit breaker mounting hole. That makes it useful for replacing a similar push-button control without changing the layout of the panel face.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eWiring is handled through a 0.25 in quick-connect tab, which suits many common marine panel terminations. Before installation, check the circuit voltage, current draw, and switching function so the OFF-(ON) momentary action matches the load and the control logic of the equipment being switched.\u003c\/p\u003e\u003cp\u003eThis switch makes sense for boat owners and installers who need a clean panel-mounted control for brief user input rather than a switch that stays in position. It works well in helm panels, auxiliary control panels, and service areas where space and panel consistency matter.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023027630261,"sku":"QBP429508","price":15.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329828_qbp429508.jpg?v=1780191633"},{"product_id":"qbp412518","title":"Blue Sea Systems DC Shunt Shifter, For 8255 Digital Meter Shunt, 12-36V DC","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8242 is a shunt shifter that lets a DC digital ammeter read a positive-side shunt circuit when it is paired with the Blue Sea Systems 8255 Digital Meter Shunt. It is used on 12 to 36V DC systems and creates a ground-referenced signal that mirrors the 8255 shunt's 500A\/50mV output.\u003c\/p\u003e\u003cp\u003eThat matters on boats where alternator output or another charging circuit is measured on the positive side, while the digital meter expects the shunt reference on the negative side. The 8242 handles that conversion without moving the main shunt, which helps when the existing cable run is already laid out and hard to change.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBuilt for positive-side shunt applications such as alternator output measurement\u003c\/li\u003e\n\u003cli\u003eMade to work with the Blue Sea Systems 8255 Digital Meter Shunt\u003c\/li\u003e\n\u003cli\u003eConverts the shunt reference from positive to negative for digital meter use\u003c\/li\u003e\n\u003cli\u003eCreates a ground-referenced signal that matches the shunt's millivolt output\u003c\/li\u003e\n\u003cli\u003eMounts directly to the shunt using the existing sense screws\u003c\/li\u003e\n\u003cli\u003eSuitable for 12 to 36V DC electrical systems\u003c\/li\u003e\n\u003cli\u003eIncludes the hardware needed for installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis adapter is intended for installations built around the Blue Sea Systems 8255 shunt and a digital ammeter that needs a negative-referenced shunt signal. It belongs in the meter and shunt signal path, so it does not replace the shunt or the meter itself.\u003c\/p\u003e\u003cp\u003eIt is a practical fit for charging-system layouts where the shunt is already on the positive side of the circuit. That is common when monitoring alternator output and similar DC current paths on cruising boats, fishing boats, and other vessels with dedicated battery charging instrumentation.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe adapter fastens directly onto the shunt with the existing sense screws, which keeps the installation compact and avoids extra mounting steps. In refits and service work, that makes it easier to add digital current monitoring without disturbing the heavy cable connections around the charging circuit.\u003c\/p\u003e\u003cp\u003eFor the cleanest result, install it close to the shunt in a protected electrical area where the meter wiring can be kept tidy and easy to trace later. That approach also makes future troubleshooting simpler if you are checking alternator output or charging performance.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis part suits boats that need a digital ammeter reading from a positive-side shunt circuit without relocating the shunt. It makes the most sense in panel upgrades and charging-system updates where the electrical layout is already fixed and the goal is to add clear current monitoring with minimal disruption.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023027859637,"sku":"QBP412518","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329819_qbp412518.jpg?v=1780191634"},{"product_id":"qbp327638","title":"Blue Sea Systems AC Micro Ammeter, 0-50A, 2 in, Backlit Face, With Coil","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8246 is an AC micro ammeter for showing current draw from 0 to 50A on a compact 2 in (50.8 mm) analog gauge. It reads through the included AC current transformer, with 50 mA AC at full scale, so the meter works with a simple two-wire connection from the coil rather than carrying the measured load through the gauge itself.\u003c\/p\u003e\u003cp\u003eOn a boat, this gives you a quick visual check of AC demand at the panel when you are tracking shore power load, generator output, or another onboard AC circuit that stays within the meter range. The face is backlit for low-light use, and the lighting circuit can be wired for either 12V or 24V DC.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e0 to 50A AC analog scale with 5A increments for quick panel checks\u003c\/li\u003e\n\u003cli\u003e2 in (50.8 mm) face size fits compact AC panel layouts\u003c\/li\u003e\n\u003cli\u003eIncluded 50A AC current transformer coil reads load without routing the full circuit current through the meter\u003c\/li\u003e\n\u003cli\u003eSimple two-wire connection from the coil keeps installation straightforward\u003c\/li\u003e\n\u003cli\u003eBacklit face with separate 12V or 24V DC lighting connection\u003c\/li\u003e\n\u003cli\u003eCan be installed in either a surface-mount or panel-mount layout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe transformer coil slips over the AC conductor you want to monitor, then the coil leads connect to the meter. That makes this a practical choice for refits and new panel builds where you want current indication without reworking the main AC wiring path through the gauge itself.\u003c\/p\u003e\u003cp\u003eThe micro face size helps when panel space is limited, and the surface-mount or panel-mount options give you more freedom in tight helm, cabin, or electrical locker installations.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis model is for AC current only, not DC monitoring. It suits onboard AC systems where a 0 to 50A range matches the circuit being watched and where a small round analog meter is easier to fit than a larger panel instrument.\u003c\/p\u003e\u003cp\u003eIt is a sensible fit for cruisers, sailboats, and powerboats with a compact AC distribution panel and a separate 12V or 24V DC source available for backlighting. If you want a simple visual reading at the panel instead of a digital display, this meter fits that job well.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAC micro ammeter\u003c\/li\u003e\n\u003cli\u003e50A AC current transformer coil\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023027892405,"sku":"QBP327638","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329854_qbp327638.jpg?v=1780191634"},{"product_id":"qbp408765","title":"Blue Sea Systems Dual USB Charger Socket, 12\/24V DC, 2.1A, IP45, 1 1\/8 in Cutout, Watertight Cap","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 12\/24V Dual USB 2.1A Charger is a dual-port USB charging socket for boats and other DC electrical systems where phones, tablets, action cameras, and small USB-powered devices need a fixed charging point. It accepts 12V or 24V DC input with a 9-32V DC input range and supplies 5V DC output at up to 2.1A total across the two USB ports.\u003c\/p\u003e\u003cp\u003eThe charger fits the same mounting hole as a traditional 12V outlet, using a 1 1\/8 in (28.58 mm) diameter cutout. That makes it a practical upgrade for helm panels, cabins, cockpit accessory panels, nav stations, and other protected locations where a standard socket is already installed or planned.\u003c\/p\u003e\u003cp\u003eA tethered protective cap helps keep dust and spray away from the USB ports when they are not in use. The unit is IP45 rated with the cover closed, uses corrosion resistant contact materials, and has potted electronics for the harsh marine environment.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDual USB charging ports let two mobile devices charge from one mounted socket.\u003c\/li\u003e\n\u003cli\u003eWorks with 12V and 24V DC systems, with a 9-32V DC input range for common marine electrical setups.\u003c\/li\u003e\n\u003cli\u003e5V DC output with a maximum total output current of 2.1A DC.\u003c\/li\u003e\n\u003cli\u003eFits a 1 1\/8 in (28.58 mm) diameter cutout, matching the mounting hole used by many traditional 12V outlets.\u003c\/li\u003e\n\u003cli\u003eProtective dust cap with tether helps reduce exposure to dust and spray when the ports are not in use.\u003c\/li\u003e\n\u003cli\u003eIP45 rating applies with the cover closed, suitable for protected marine mounting locations that may see spray or washdown mist.\u003c\/li\u003e\n\u003cli\u003ePotted electronics help the charger stand up to vibration, humidity, and the harsh marine environment.\u003c\/li\u003e\n\u003cli\u003eReverse polarity protection, short circuit protection, and thermal overload protection are built in.\u003c\/li\u003e\n\u003cli\u003eCompatible with most mobile devices, including Apple products.\u003c\/li\u003e\n\u003cli\u003eA 2A supply fuse is required and is not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis charger is offered in two color configurations for matching different helm, console, cabin, and panel layouts.\u003c\/p\u003e\u003cp\u003eThe electrical specifications, mounting cutout, USB output, protective cap, and protection features are consistent across the variants. The difference is the visible color of the charger body.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1016 - Black. The black version blends well with dark switch panels, black acrylic dashboards, and helm layouts where other DC accessories use a dark finish.\u003c\/li\u003e\n\u003cli\u003e1016200 - White. The white version suits light-colored consoles, cabin panels, and fiberglass areas where a white accessory face looks more natural.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis charger is made for panel mounting in an existing or new 12V outlet-style opening. The 1 1\/8 in diameter cutout is useful when replacing an older socket with a USB charging point, especially in a helm, cabin, or accessory panel where space is limited.\u003c\/p\u003e\u003cp\u003eFor wiring, the charger should be connected to a protected 12V or 24V DC circuit with the required 2A supply fuse. The socket uses .250 female quick connect terminals, so matching terminals and a clean crimp are important for a secure connection in a vibration-prone boat environment.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis charger is a good match for boats that need a simple fixed USB charging point without adding a larger electronics module. It fits well at the helm for a phone running navigation apps, in the cabin for overnight charging, or near a cockpit accessory panel for USB-powered gear used during fishing, cruising, or dockside time.\u003c\/p\u003e\u003cp\u003eBecause the cap protects the ports when closed, it is best used where occasional spray, humidity, and dust are expected, while still keeping the USB face covered when charging is not needed.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Black","offer_id":52023040049333,"sku":"QBP408765-V0","price":39.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":52023040082101,"sku":"QBP408765-V1","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333302_qbp408765.jpg?v=1780191634"},{"product_id":"qbp409076","title":"Blue Sea Systems Dual USB Charger","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Blue Sea Systems dual USB charger is a marine DC charging option for adding USB power at the helm, cockpit, cabin, nav station, or an accessory panel. The range covers socket-mount and Contura switch-mount installations, with voltage options for 12V, 24V, 12\/24V, and 48V DC systems depending on the selected variant.\u003c\/p\u003e\u003cp\u003eThe 12\/24V charger versions provide 4.8A total output at 5V DC, while the 48V versions provide 4A total output at 5V DC. The 12\/24V models accept a 9-32V DC input range, and the 48V models accept a 32-64V DC input range, which helps buyers match the charger to the vessel, golf cart, or DC accessory system before cutting a panel or wiring the circuit.\u003c\/p\u003e\u003cp\u003eThese chargers use intelligent device recognition so phones, tablets, and other USB-powered devices can charge at the rate they request. Depending on the version, the installation fits either a common 1-1\/8 in round mounting hole, an existing Contura switch aperture, or a 360 Panel module layout.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDual USB Type-A charging for phones, tablets, and other mobile devices used on board.\u003c\/li\u003e\n\u003cli\u003eIntelligent device recognition adjusts charging behavior to the connected device.\u003c\/li\u003e\n\u003cli\u003eInternal filtering helps reduce electronic interference in nearby DC electrical systems.\u003c\/li\u003e\n\u003cli\u003eReverse polarity, short circuit, and thermal overload protection are included on the charger versions where specified.\u003c\/li\u003e\n\u003cli\u003eIP45 rating with the cover closed on the 12\/24V and 48V charger variants helps protect the ports from spray and debris in exposed mounting areas.\u003c\/li\u003e\n\u003cli\u003eSocket-mount versions fit a common 1-1\/8 in hole, which suits dashboards, consoles, switch panels, and cockpit accessory locations.\u003c\/li\u003e\n\u003cli\u003eSwitch-mount versions fit an existing Contura switch aperture for a clean panel installation without changing the switch-panel style.\u003c\/li\u003e\n\u003cli\u003ePotted electronics on the 12\/24V and 48V charger versions help the circuit board tolerate the vibration and damp conditions common in marine service.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe product is offered in multiple configurations for different installation styles and DC system voltages. The main differences are the mount format and input voltage, so the selected version should match both the available panel cutout and the electrical system feeding the charger.\u003c\/p\u003e\u003cp\u003eThe 12\/24V and 48V charger variants share dual USB Type-A output, intelligent device recognition, internal filtering, and built-in electrical protections. The 1478 configuration is a 360 Panel module that combines a 12V DC socket with a dual USB charger, so its panel format and output rating differ from the round socket-mount charger versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1046: Socket mount installation, 48V voltage. This version mounts in a common 1-1\/8 in round hole and supports 48V DC systems with a 32-64V DC input range.\u003c\/li\u003e\n\u003cli\u003e1038: Switch mount installation, 48V voltage. This version fits an existing Contura switch aperture, which works well when the charger needs to match a Contura-style helm or accessory panel.\u003c\/li\u003e\n\u003cli\u003e1039: Switch mount installation, 24V voltage. This switch-mount version is part of the 12\/24V charger range with a 9-32V DC input range, making it suitable for 24V DC installations when the panel uses a Contura aperture.\u003c\/li\u003e\n\u003cli\u003e1045: Socket mount installation, 12\/24V voltage. This round socket-mount version fits a common 1-1\/8 in hole and supports both 12V and 24V DC electrical systems.\u003c\/li\u003e\n\u003cli\u003e1478: Socket mount installation, 12V voltage. This version is a 360 Panel module with one 12V DC socket and one dual USB charger, giving the panel both USB charging and a 12V accessory socket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore installation, confirm the panel opening and the supply voltage. The socket-mount charger versions are meant for a common 1-1\/8 in hole, while the Contura switch-mount versions use the rectangular Contura switch aperture found on many marine switch panels.\u003c\/p\u003e\u003cp\u003eFor wiring, the charger should be connected to a protected DC circuit that matches the selected voltage version. The 12\/24V models are not the same as the 48V models, so matching the charger to the boat or vehicle electrical system is more important than matching only the physical mount style.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe dual USB output is useful for keeping phones, tablets, handheld GPS units, action cameras, and Bluetooth accessories charged while underway or at the dock. The internal filtering is useful in helm and electronics areas where VHF radios, chartplotters, fishfinders, and other DC electronics may be installed nearby.\u003c\/p\u003e\u003cp\u003eThis charger range is a practical match for refits where an older 12V socket is being supplemented with USB charging, for new helm panels that need a clean USB power point, and for utility panels where crew need easy access to device charging without using a loose adapter.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the cover closed when the USB ports are not in use, especially in cockpit, console, and open-boat installations where spray, salt, and dust can reach the panel. Periodically check that the cover moves freely and that the terminals remain clean and secure after vibration, washdowns, or seasonal layup.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Socket Mount \/ 48V","offer_id":52023040114869,"sku":"QBP409076-V9","price":87.99,"currency_code":"USD","in_stock":true},{"title":"Switch Mount \/ 48V","offer_id":52023040147637,"sku":"QBP409076-V8","price":87.99,"currency_code":"USD","in_stock":true},{"title":"Switch Mount \/ 24V","offer_id":52023040180405,"sku":"QBP409076-V5","price":74.99,"currency_code":"USD","in_stock":true},{"title":"Socket Mount \/ 12\/24V","offer_id":52023040213173,"sku":"QBP409076-V3","price":74.99,"currency_code":"USD","in_stock":true},{"title":"Socket Mount \/ 12V","offer_id":52023040245941,"sku":"QBP409076-V2","price":196.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333306_qbp409076.jpg?v=1780191635"},{"product_id":"qbp606251","title":"Blue Sea Systems 360 AC Branch Circuit Breaker Panel, 120V AC, 8 Positions, 100A, Flat Rocker","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1228 is a 120V AC branch circuit breaker panel with eight positions for distributing onboard AC power to individual circuits. It is built in the 360 Panel System format and comes with eight single-pole 15A breakers, a 100A maximum panel rating, and a compact footprint that measures 7.75 in high, 4.88 in wide, and 3.00 in deep.\u003c\/p\u003e\u003cp\u003eAll circuit label positions are backlit, and each position has an ON indicator LED, so circuit status is easier to read in a cabin, nav station, or interior electrical space. This is a branch panel rather than a combined main and branch panel, which matters if your boat already has a separate AC main breaker or source-selection section.\u003c\/p\u003e\u003cp\u003eIt also arrives with hot, neutral, and safety ground buses already installed and pre-wired. That makes it a practical choice for new AC distribution work or for replacing an older panel where clean branch-circuit organization matters.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eEight 120V AC branch circuit positions with included single-pole 15A breakers\u003c\/li\u003e\n\u003cli\u003e100A maximum panel amperage for properly sized AC distribution systems\u003c\/li\u003e\n\u003cli\u003eBacklit label windows and ON indicator LEDs at every circuit position\u003c\/li\u003e\n\u003cli\u003eHot, neutral, and safety ground buses are installed and pre-wired\u003c\/li\u003e\n\u003cli\u003eTin-plated copper bus bars for conductivity and better resistance to corrosion in marine electrical spaces\u003c\/li\u003e\n\u003cli\u003e360 Panel System format supports modular panel layouts and future expansion\u003c\/li\u003e\n\u003cli\u003eCompact panel size for installations where space behind the face is limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is an interior branch panel, so it belongs in a protected mounting location where the face stays accessible for switching, labeling, and routine checks. The included cutout template helps when you are fitting it into a new panel board or replacing a panel in an existing AC distribution area.\u003c\/p\u003e\u003cp\u003eBecause it uses the 360 Panel System format, it works well in custom panel layouts where the AC branch section sits alongside other control or source modules. On board, eight branch positions are enough for many common 120V AC loads, provided the circuit design, conductor sizing, and upstream protection match the vessel's electrical plan.\u003c\/p\u003e\u003ch6\u003eElectrical configuration\u003c\/h6\u003e\u003cp\u003eThis panel is set up for 120V AC service and ships with eight flat rocker 15A breakers already fitted. The 100A panel rating gives room for multiple branch circuits, but the final allowable load still depends on using wire and overcurrent protection sized correctly for the installation.\u003c\/p\u003e\u003cp\u003eFor refits, this panel is a good match when the boat already has a separate AC main breaker arrangement and the job here is to split incoming AC power into clearly labeled branch circuits. For new builds, it suits builders and owners who want a compact AC branch section with the internal buses already in place.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eEight A-Series flat rocker single-pole 15A circuit breakers\u003c\/li\u003e\n\u003cli\u003eBasic AC label kit with 30 black square labels\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003cli\u003eCutout template\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023041097909,"sku":"QBP606251","price":614.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329896_qbp606251.jpg?v=1780191635"},{"product_id":"qbp410170","title":"Blue Sea Systems 360 Panel DC Branch Circuit Breaker Panel, 12V, Dual USB 4.8A, 12V Dash Socket","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 360 Panel is a 12V DC branch circuit breaker panel range that combines circuit protection with a dual USB charger and a 12V dash socket for organized onboard power distribution. It is used to take power from a higher-amperage DC feed and divide it into protected lower-amperage circuits, which makes it useful at a helm, cabin control station, electronics area, or small accessory panel.\u003c\/p\u003e\u003cp\u003eBoth configurations share the same panel size, measuring 7.75 in x 4.88 in x 3.5 in, or 196.85 mm x 123.95 mm x 88.9 mm. The integrated dual USB charger is rated for 12V or 24V input and 4.8A output, while the panel itself is a nominal 12V DC panel with a 12V dash socket for compatible accessories.\u003c\/p\u003e\u003cp\u003eThe 360 Panel format keeps switching, circuit protection, USB charging, and a socket in one clean location, reducing the need for separate accessory cutouts. ON-indicating LEDs and backlit label positions help make circuit status and labeling easier to read during night running, early starts, or work in shaded areas below deck.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12V DC branch circuit breaker panel for distributing a main DC feed into protected accessory circuits.\u003c\/li\u003e\n\u003cli\u003eAvailable in 4-position and 8-position configurations for different circuit counts.\u003c\/li\u003e\n\u003cli\u003eIntegrated dual USB charger rated for 12V or 24V input with 4.8A output.\u003c\/li\u003e\n\u003cli\u003eIncludes a 12V dash socket for powering compatible onboard accessories.\u003c\/li\u003e\n\u003cli\u003e15A circuit protection on each switched circuit, with breaker style varying by configuration.\u003c\/li\u003e\n\u003cli\u003eON-indicating LEDs give quick visual feedback when circuits are active.\u003c\/li\u003e\n\u003cli\u003eBacklit label positions improve circuit identification in low light.\u003c\/li\u003e\n\u003cli\u003eShared panel dimensions of 7.75 in x 4.88 in x 3.5 in help with cutout planning and replacement checks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis 360 Panel is offered in two configurations based on the number of protected circuit positions.\u003c\/p\u003e\u003cp\u003eThe main differences are the position count, maximum panel amperage, and breaker style. Both variants are nominal 12V DC panels with an integrated dual USB charger, a 12V dash socket, ON-indicating LEDs, backlit label positions, and the same overall dimensions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1495: 4 positions. This version uses four 15A A-Series circuit breakers and has a maximum amperage of 100A, giving smaller DC installations a compact panel with charging and accessory power built in.\u003c\/li\u003e\n\u003cli\u003e1498: 8 positions. This version uses eight 15A push-button circuit breakers and has a maximum amperage of 90A, giving more branch circuits in the same panel footprint for busier helm or accessory layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore installation, confirm that the vessel uses a suitable 12V DC panel location and that the available depth can accommodate the 3.5 in panel depth, plus room for wiring bends and service access. The 7.75 in x 4.88 in face size is useful when planning a new cutout or replacing an older accessory panel in a helm console, cabin bulkhead, or protected equipment area.\u003c\/p\u003e\u003cp\u003eBecause this panel combines breakers, USB charging, and a dash socket, it can simplify accessory wiring when compared with separate switches, chargers, and outlets mounted across different locations. Use properly sized conductors, overcurrent protection for the supply feed, and marine installation practices appropriate for the vessel.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe panel is built around a nominal 12V DC branch circuit layout. Each switched circuit is rated at 15A, so connected loads should be matched to the circuit rating, wire size, and total panel capacity for the selected variant. The USB charger can accept 12V or 24V input, but the panel and dash socket should still be treated as part of a 12V DC panel installation.\u003c\/p\u003e\u003cp\u003eThis is a practical match for boats that need protected accessory circuits along with convenient charging for phones, tablets, handheld electronics, or other USB-powered gear. It also suits installations where a 12V socket is still needed for plug-in accessories at the helm or inside the cabin.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"4","offer_id":52023041327285,"sku":"QBP410170-V0","price":430.99,"currency_code":"USD","in_stock":false},{"title":"8","offer_id":52023041360053,"sku":"QBP410170-V4","price":386.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333334_qbp410170.jpg?v=1780191636"},{"product_id":"qbp410427","title":"Blue Sea Systems Mini OLED Tank Meter, 8V-36V DC, 12V\/24V DC, 5% Resolution, 10-180\/240-33 Ohm Senders, 1-1\/8 in Hole Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Mini OLED Tank Meter is a compact tank level display for 12V and 24V DC boat electrical systems, with an 8V-36V DC input range and a daylight-readable OLED screen that works well at the helm, cabin panel, or equipment area. It reads compatible resistive tank senders and displays tank level with 5% resolution, giving a simple view of onboard tank status without taking up much panel space.\u003c\/p\u003e\u003cp\u003eThe meter fits a common 1-1\/8 in mounting hole, which makes it practical for new panels, refits, or replacing a small round gauge. It is reverse-polarity protected, draws only 17mA during operation, and supports common sender ranges including European 10-180 ohm and North American 240-33 ohm senders.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOLED display that is waterproof and readable in daylight for use on exposed or semi-exposed boat panels.\u003c\/li\u003e\n\u003cli\u003eWorks with 12V DC and 24V DC systems through an 8V-36V DC input range.\u003c\/li\u003e\n\u003cli\u003eTank level reading with 5% resolution for a quick check of onboard fuel, water, or holding tank status when paired with a compatible sender.\u003c\/li\u003e\n\u003cli\u003eCompatible with European 10-180 ohm and North American 240-33 ohm resistive tank senders.\u003c\/li\u003e\n\u003cli\u003eMounts in a common 1-1\/8 in hole, helping it fit many marine dash and distribution panel layouts.\u003c\/li\u003e\n\u003cli\u003eReverse-polarity protection adds a safeguard during wiring and service work.\u003c\/li\u003e\n\u003cli\u003eLow 17mA operating current helps keep panel monitoring loads modest on battery-powered systems.\u003c\/li\u003e\n\u003cli\u003eRated for operation from -40°C to 70°C, covering engine-adjacent compartments, cabins, and outdoor panel locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Mini OLED Tank Meter is offered in two color configurations, with the same product type and core tank-meter function across the range.\u003c\/p\u003e\u003cp\u003eThe variation is the display color. The electrical range, sender compatibility, mounting hole size, 5% resolution, operating current, and weight are consistent between the Yellow and Blue versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1739: Color Yellow. The yellow display gives a warm, high-contrast look that can stand out clearly on darker instrument panels.\u003c\/li\u003e\n\u003cli\u003e1739200: Color Blue. The blue display matches well with many modern helm electronics and backlit switch panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis meter is meant for panel mounting in a 1-1\/8 in round opening, so it can be placed near other DC monitoring gear or close to the tank system being monitored. Wiring should be kept tidy and protected from strain, moisture paths, and vibration, especially on console panels and inside service compartments.\u003c\/p\u003e\u003cp\u003eBefore installation, confirm that the tank sender on board matches one of the supported resistive ranges. Matching the sender range matters more than the tank type, since the meter depends on the sender resistance to translate tank level into a readable display.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis meter suits boats that use 12V or 24V DC electrical systems and compatible resistive tank senders. It is a good match for owners upgrading a small gauge location, adding a dedicated tank readout to a DC panel, or keeping tank monitoring separate from larger multifunction displays.\u003c\/p\u003e\u003cp\u003eAt 0.30 lb, the unit adds very little weight to a dash or panel. Its compact format is useful on center consoles, cruising sailboats, fishing boats, and small cabin boats where panel space is limited but a clear tank reading still matters.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Yellow","offer_id":52023041392821,"sku":"QBP410427-V0","price":81.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":52023041425589,"sku":"QBP410427-V2","price":81.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333336_qbp410427.jpg?v=1780191636"},{"product_id":"qbp410834","title":"Blue Sea Systems PowerBar 1000 Busbar, 1000A, 150V, Tin-Plated Copper, Snap-On Insulating Cover","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems PowerBar 1000 is a high-capacity busbar for bringing large and small conductors together in a single, organized connection point on a boat. It carries a 1,000A continuous rating and supports systems up to 150V, making it a strong match for larger DC distribution layouts, inverter feeds, battery banks, fuse block connections, and other high-current marine circuits.\u003c\/p\u003e\u003cp\u003eThe bus is made from tin-plated C11000 copper, with a stepped layout that places conductors on two elevations to help keep heavy cable runs and smaller branch connections easier to route. Each configuration includes terminal studs for main conductors, #10-32 and #8-32 terminal screws for smaller gauge wires, and a snap-on insulating cover with a label recess.\u003c\/p\u003e\u003cp\u003eThe base is made from UL 94-V0 rated glass-reinforced thermoplastic, and the cover helps the finished installation meet ABYC and USCG requirements for insulated high-current connections. The bar can also be shortened where space is tight, which is useful in battery compartments, electrical panels, and machinery spaces where cable bend radius and service access both matter.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1,000A continuous rating for large marine DC distribution systems.\u003c\/li\u003e\n\u003cli\u003e150V maximum voltage rating for compatibility with common low-voltage marine electrical architectures.\u003c\/li\u003e\n\u003cli\u003eTin-plated C11000 copper bus material for conductivity and resistance to corrosion in marine electrical spaces.\u003c\/li\u003e\n\u003cli\u003eStepped bus layout gives conductors two working elevations, helping reduce crowding when several large cables land in the same area.\u003c\/li\u003e\n\u003cli\u003eAccepts both terminal studs and terminal screws, so large conductors and smaller accessory or fuse block connections can share the same distribution point.\u003c\/li\u003e\n\u003cli\u003eOne-piece serrated flange nuts help maintain secure stud connections after proper torque is applied.\u003c\/li\u003e\n\u003cli\u003eStainless steel 8-32 screws with captive lock washers support smaller gauge wire terminations.\u003c\/li\u003e\n\u003cli\u003eMounting holes accept #10 or M5 screws for installation on panels, boards, or other suitable mounting surfaces.\u003c\/li\u003e\n\u003cli\u003eSnap-on insulating cover includes a label recess and supports ABYC and USCG compliant installation practices.\u003c\/li\u003e\n\u003cli\u003eBi-directional end caps allow additional busbars to be ganged when the electrical system needs more distribution capacity.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe PowerBar 1000 is offered in four configurations. The options change by terminal stud size and the number of terminal studs, while the core 1,000A busbar layout, 150V maximum voltage rating, tin-plated copper bus material, and insulated cover remain consistent across the range.\u003c\/p\u003e\u003cp\u003eThe 3\/8-inch stud versions use 3\/8-inch-16 terminal studs with a 140 in-lb terminal stud torque. The 5\/16-inch stud versions use 5\/16-inch-18 terminal studs with a 120 in-lb terminal stud torque.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1990 has 3\/8-inch terminal studs and 8 studs. This layout suits installations with fewer main cable landings while keeping the larger 3\/8-inch stud size for heavy conductors.\u003c\/li\u003e\n\u003cli\u003e1992 has 5\/16-inch terminal studs and 8 studs. This version keeps the shorter 8-stud format while matching systems already built around 5\/16-inch ring terminals.\u003c\/li\u003e\n\u003cli\u003e1991 has 3\/8-inch terminal studs and 12 studs. The added stud count gives more main connection points for larger DC distribution layouts that use 3\/8-inch lugs.\u003c\/li\u003e\n\u003cli\u003e1993 has 5\/16-inch terminal studs and 12 studs. This configuration gives the higher stud count while keeping 5\/16-inch terminal compatibility for matching cable hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the PowerBar 1000 on a dry, serviceable electrical surface where the cover can be removed for inspection and where connected cables are properly supported. The bar accepts #10 or M5 mounting screws, and the installation should leave enough room for ring terminals, bend radius, labels, and tool access for torque checks.\u003c\/p\u003e\u003cp\u003eThe busbar may be cut to a shorter length when the available mounting space is limited. After any modification, the finished installation still needs clean conductor routing, protected positive conductors where applicable, and a cover fitted over exposed high-current terminals.\u003c\/p\u003e\u003ch6\u003eElectrical integration\u003c\/h6\u003e\u003cp\u003eThis busbar is useful where several high-current circuits need a common distribution point, such as battery banks, inverter circuits, charging systems, DC panels, or fuse block groups. The matching elevations between the busbar and common fuse blocks can reduce the need for extra connecting cables, which helps keep the installation cleaner and easier to inspect.\u003c\/p\u003e\u003cp\u003eRing terminal size should match the selected stud version, and all connections should be tightened to the correct torque for that stud size. The smaller screw terminals are intended for smaller conductor connections and use the listed #10-32 and #8-32 screw hardware rather than the main terminal studs.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"3\/8-Inch \/ 8","offer_id":52023041589429,"sku":"QBP410834-V9","price":265.99,"currency_code":"USD","in_stock":true},{"title":"5\/16-Inch \/ 8","offer_id":52023041622197,"sku":"QBP410834-V2","price":265.99,"currency_code":"USD","in_stock":true},{"title":"3\/8-Inch \/ 12","offer_id":52023041654965,"sku":"QBP410834-V6","price":331.99,"currency_code":"USD","in_stock":true},{"title":"5\/16-Inch \/ 12","offer_id":52023041687733,"sku":"QBP410834-V4","price":331.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333339_qbp410834.webp?v=1780191636"},{"product_id":"qbp412057","title":"Blue Sea Systems PowerBar 600A BusBar, 300V AC, 48V DC, 3\/8-16 Stud","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems PowerBar 600A BusBar is a high-current bus bar for organizing heavy DC and AC cable connections in marine electrical systems.\u003c\/p\u003e\u003cp\u003eIt is rated for 600A DC and 545A AC continuous service, with a maximum voltage rating of 48V DC or 300V AC. The 3\/8\"-16 stud terminals suit large cable lugs used in battery banks, inverter feeds, windlass circuits, thrusters, charging systems, and main distribution points where clean cable routing matters.\u003c\/p\u003e\u003cp\u003eThe bus is tin-plated copper CDA 110\/UNS11000 on a UL 94-V0 rated glass-reinforced thermoplastic base, giving installers a compact way to build a central positive, negative, or ground bussing point while keeping high-amperage terminations accessible for inspection and service.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e600A DC and 545A AC continuous rating for high-current marine distribution work.\u003c\/li\u003e\n\u003cli\u003eMaximum voltage rating of 48V DC or 300V AC for use in common marine DC systems and applicable AC distribution layouts.\u003c\/li\u003e\n\u003cli\u003e3\/8\"-16 stud terminals accept large cable lugs used on battery cables and other heavy conductors.\u003c\/li\u003e\n\u003cli\u003eTin-plated copper bus helps maintain conductivity in demanding onboard electrical environments.\u003c\/li\u003e\n\u003cli\u003eUL 94-V0 rated glass-reinforced thermoplastic base adds insulation and support for panel or bulkhead mounting.\u003c\/li\u003e\n\u003cli\u003eTerminal stud torque rating of 140 in-lb helps installers tighten connections to a defined value instead of guessing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis PowerBar 600A BusBar range is offered in two terminal-count configurations, so the main difference is how many high-current stud connections are available on the same style of bus bar.\u003c\/p\u003e\u003cp\u003eBoth variants use 3\/8\"-16 stud terminals and share the same 600A DC, 545A AC, 48V DC, and 300V AC ratings. The right configuration depends on how many heavy cable takeoffs need to land at the bussing point.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2104: 4 terminals. This version suits smaller high-current layouts, such as a main battery connection with a limited number of branch cables or charging leads.\u003c\/li\u003e\n\u003cli\u003e2107: 8 terminals. This version gives more landing points for systems with multiple heavy cable runs, such as larger battery banks, inverter circuits, windlass wiring, or grouped distribution feeds.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the bus bar where cable runs can be kept short, supported, and protected from accidental contact. Engine rooms, battery compartments, electrical panels, and service lockers are common locations, provided the mounting surface is solid and the terminals remain accessible.\u003c\/p\u003e\u003cp\u003eUse properly crimped marine cable lugs sized for the conductor and stud, then tighten the stud hardware to the specified torque. High-current connections should be checked as part of routine electrical maintenance, especially after installation, after heavy vibration, or after work has been done near the battery or charging system.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis bus bar is a fit for boats that need a compact high-amperage junction point rather than stacking multiple heavy cables directly on a battery post or device terminal. It is useful on cruising boats, fishing boats, workboats, and refits where the electrical system is being cleaned up or expanded.\u003c\/p\u003e\u003cp\u003eBefore installation, confirm cable lug hole size, available mounting space, conductor routing, circuit protection, and whether the bus bar will be used for positive, negative, or ground bussing in the vessel’s wiring plan.\u003c\/p\u003e\u003ch6\u003eMaterials and corrosion resistance\u003c\/h6\u003e\u003cp\u003eThe tin-plated copper bus supports conductivity while giving the exposed metal surface better resistance to the conditions found around marine electrical compartments. The insulated base helps separate the energized bus from the mounting surface, but the installation should still be protected from loose gear, tools, and unintended contact.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"4","offer_id":52023042146485,"sku":"QBP412057-V1","price":176.99,"currency_code":"USD","in_stock":true},{"title":"8","offer_id":52023042179253,"sku":"QBP412057-V8","price":244.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1333349_qbp412057.jpg?v=1780191637"},{"product_id":"qbp286956","title":"Blue Sea Systems 12 Volt Plug with Single Extension Socket, 10A Fuse, 6 ft Cord","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1012 is a 12V plug with a single extension socket that adds a power point up to 6 feet from the source, using heavy-duty 18 gauge wire and a built-in 10A fuse at the plug.\u003c\/p\u003e\u003cp\u003eIt works well on boats where the main outlet is fixed at the dash or switch panel and the accessory needs power farther away. The plug uses a moisture-proof sealing ring so it seats firmly in the outlet, and the socket has a watertight cap when it is not in use.\u003c\/p\u003e\u003cp\u003eThe plug and socket lock together with a twist-lock connection, which helps them stay engaged in spray and vibration. Nickel-plated copper alloy current-carrying parts help maintain solid contact in damp marine service.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12V plug with a single extension socket on a cord up to 6 feet long\u003c\/li\u003e\n\u003cli\u003eBuilt-in 10A fuse and \"ON\" LED at the plug for quick power confirmation\u003c\/li\u003e\n\u003cli\u003eMoisture-proof sealing ring at the plug and a watertight cap on the socket\u003c\/li\u003e\n\u003cli\u003eTwist-lock connection helps prevent the plug from backing out of the socket\u003c\/li\u003e\n\u003cli\u003eInternal strain relief and cord seal for repeated use where the cord moves\u003c\/li\u003e\n\u003cli\u003eNickel-plated copper alloy used for the current-carrying components\u003c\/li\u003e\n\u003cli\u003eSocket can be mounted on the front panel, rear panel, or on the surface\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis setup is useful when you want a removable 12V outlet closer to the helm, cockpit seating, a berth, or a work area in the cabin without rewiring the whole panel. The mounting options give you more freedom when space behind a dash or locker face is limited.\u003c\/p\u003e\u003cp\u003eBecause the connection locks together, it suits boats that see regular pounding, engine vibration, or spray around the helm. It is a good match for 12V accessories that need a stable connection and stay within the plug's 10A fused circuit.\u003c\/p\u003e\u003ch6\u003eCompatibility and use on board\u003c\/h6\u003e\u003cp\u003eIt pairs with Blue Sea Systems 12V sockets that use the same locking plug format, including the brand's dash sockets and 360 panel socket setup. On board, that makes it useful for moving power to a spotlight, handheld electronics charger, portable fan, or other 12V accessory without leaving a loose adapter hanging at the outlet.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023052665013,"sku":"QBP286956","price":43.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329881_qbp286956.jpg?v=1780191637"},{"product_id":"qbp359195","title":"Blue Sea Systems 12V Socket Mounting Bracket, Glass-Filled Nylon, Socket Not Included","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1014 is a mounting bracket for the 1011 12V socket when you need to place the outlet below a panel, bulkhead, or other mounting surface. It supports front panel, rear panel, or surface-mount installation, and it keeps the socket positioned for the twist-lock plug connection used in this Blue Sea setup.\u003c\/p\u003e\u003cp\u003eThis bracket is useful when a dash-style outlet needs to be added at the helm, in the cabin, or anywhere a flush socket cutout is not the best fit. It is built for wet locations and constant vibration, weighs about 0.07 lb, and is sold without the socket itself.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade to fit the Blue Sea Systems 1011 12V socket\u003c\/li\u003e\n\u003cli\u003eCan be installed as a front panel, rear panel, or surface-mount bracket\u003c\/li\u003e\n\u003cli\u003eLets the socket sit below the mounting surface when a flush install is not practical\u003c\/li\u003e\n\u003cli\u003eBuilt for wet environments and the vibration that is common on boats\u003c\/li\u003e\n\u003cli\u003eWorks with the twist-lock plug and socket arrangement used in this 12V outlet system\u003c\/li\u003e\n\u003cli\u003eLight bracket weight at about 0.07 lb, which helps on thinner panels and consoles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe 1014 is a straightforward way to mount a 1011 socket where access behind the panel is limited or where you want the outlet suspended below the mounting surface. That can be helpful on helm pods, side consoles, under-dash panels, and cabin joinery where a clean outlet location matters but space is tight.\u003c\/p\u003e\u003cp\u003eBecause this is only the bracket, it should be matched with the correct Blue Sea Systems 1011 socket before planning the install. That makes it a better fit for replacement work or for a new 12V outlet location that uses the same socket style elsewhere on board.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis bracket is intended for the Blue Sea Systems 1011 12V socket rather than as a universal outlet mount. It is a sensible choice for boats that need a secure 12V accessory point for portable lighting, handheld electronics, or other plug-in gear in areas that see spray, motion, and regular use.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023052697781,"sku":"QBP359195","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329882_qbp359195.webp?v=1780191637"},{"product_id":"qbp775707","title":"Blue Sea Systems 12V DC Plug with Dash Socket, 10A Fuse, Twist-Lock, Watertight Cap","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1015 is a 12V DC plug and dash socket set for boats that need a more secure accessory connection than a loose standard outlet. It combines the 1010 plug and the 1011 dash socket, with a twist-lock connection that helps the plug stay seated in chop and vibration. The included plug has an ON LED and a built-in 10 Amp fuse, and the socket fits a 1 1\/8 in (28.58 mm) cutout.\u003c\/p\u003e\u003cp\u003eThis setup makes sense at the helm, in the cabin, or anywhere you power portable 12V gear and want the connection to stay put. The plug uses a moisture-proof sealing ring around the shaft, and the socket has a watertight cap to help keep out spray when the outlet is not in use.\u003c\/p\u003e\u003cp\u003eIt is a good match for boats that run handheld electronics, spotlights, inflators, or other 12V accessories and need a plug-and-socket pair that holds better underway. Current-carrying parts use nickel-plated copper alloy, and the socket can be mounted from the front panel, rear panel, or on a surface.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12V DC plug and dash socket set with one 1010 plug and one 1011 socket\u003c\/li\u003e\n\u003cli\u003ePlug includes an ON LED and a built-in 10 Amp fuse\u003c\/li\u003e\n\u003cli\u003eSocket is rated for 15A max and installs in a 1 1\/8 in (28.58 mm) cutout\u003c\/li\u003e\n\u003cli\u003eTwist-lock connection helps prevent the plug from backing out in vibration\u003c\/li\u003e\n\u003cli\u003eMoisture-proof sealing ring on the plug and a watertight cap on the socket help keep out spray\u003c\/li\u003e\n\u003cli\u003eLarge contact surfaces support a firm electrical connection\u003c\/li\u003e\n\u003cli\u003eInternal strain relief and cord seal help protect the cable entry point\u003c\/li\u003e\n\u003cli\u003eNickel-plated copper alloy is used for all current-carrying components\u003c\/li\u003e\n\u003cli\u003eSocket supports front panel, rear panel, or surface mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis set is built for 12V DC systems, so it fits boats already wired for a 12V accessory outlet. The 1 1\/8 in cutout size is useful when you are adding a new socket at the dash or replacing an older outlet in the same area. The mounting options also help when there is limited access behind a panel.\u003c\/p\u003e\u003cp\u003eBecause the plug includes its own 10 Amp fuse, it suits accessory loads that stay within that limit. For marine installs, it works best where you want a removable power point but do not want the plug shaking loose every time the boat pounds into chop or wake.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 x Blue Sea Systems 1010 12 Volt Plug\u003c\/li\u003e\n\u003cli\u003e1 x Blue Sea Systems 1011 Dash Socket 12V DC with Watertight Cap\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023052730549,"sku":"QBP775707","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329830_qbp775707.jpg?v=1780191638"},{"product_id":"qbp863184","title":"Blue Sea Systems 12V DC USB Extension, USB 2.0, IP45, 5 ft Cable, 1-1\/8 in Mounting Hole","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1044 is a 12V DC USB extension that brings a stereo or other onboard USB connection out to the helm or cockpit. It mounts in a 1-1\/8 in. (29 mm) hole, uses a prewired 5 ft. (1.52 m) cable, and carries an IP45 rating with the cover closed.\u003c\/p\u003e\u003cp\u003eOn boats where the stereo sits inside the cabin, console, or electronics space, this gives you a practical access point at the dash instead of leaving a loose cable run exposed. The tethered cap helps keep dust and spray off the port when it is not in use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eUSB 2.0 extension for bringing a stereo or other onboard USB connection to the dash or cockpit\u003c\/li\u003e\n\u003cli\u003ePrewired 5 ft. (1.52 m) cable for routing from the stereo to the mounting location\u003c\/li\u003e\n\u003cli\u003eFits a 1-1\/8 in. (29 mm) mounting hole used on many dash and console panels\u003c\/li\u003e\n\u003cli\u003eTethered protective cap helps keep dust and spray out of the port when not in use\u003c\/li\u003e\n\u003cli\u003eIP45 rating with the cover closed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is an extension point for an existing USB connection, so it suits installations where the stereo or connected device already has a compatible USB port behind the panel. The 5 ft. cable works for many helm, console, and cabin layouts, but it is still worth checking the routing path before drilling the cutout.\u003c\/p\u003e\u003cp\u003eThe round dash-mount format works well where you want a fixed USB access point at the helm without leaving the source unit exposed. In more open mounting locations, keeping the cap closed between uses helps the port stay protected from normal cockpit spray and dust.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis fits boats that keep the head unit protected inside the console or cabin and still want phone or tablet access from the cockpit. It makes sense on runabouts, center consoles, and cruising boats where music control happens at the helm.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023052763317,"sku":"QBP863184","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329802_qbp863184.jpg?v=1780191638"},{"product_id":"qbp902833","title":"Blue Sea Systems Floyd Bell Turbo Series Alarm, 5-30V DC, Adjustable Volume, 1 in Panel Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1070 is a Floyd Bell Turbo Series panel-mount audible alarm for 12V and 24V DC warning circuits. It runs on 5 to 30V DC, fits a 1 inch round panel aperture, and uses a pulsed alarm tone that reaches 103 dB at 30V DC.\u003c\/p\u003e\u003cp\u003eThis is the kind of alarm that makes sense when you want a clear audible warning at the helm, on a switch panel, or next to a monitoring display without giving up much panel space. The sound level is adjusted at the front bezel, so it is easier to set for an open helm, an enclosed cabin, or another location where background noise changes from boat to boat.\u003c\/p\u003e\u003cp\u003eFor fit and wiring, the important details are straightforward: it mounts through the panel with a threaded body and locking ring, and it connects with male quick connect terminals in a simple two-wire DC circuit. It works well anywhere a monitoring or control system needs a compact audible alert.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNominal 12V and 24V DC use with a 5 to 30V DC operating range\u003c\/li\u003e\n\u003cli\u003eFits a 1 inch round panel cutout for compact installs at the helm or electrical panel\u003c\/li\u003e\n\u003cli\u003eRotating front bezel adjusts alarm volume without removing the unit from the panel\u003c\/li\u003e\n\u003cli\u003eMale quick connect terminals keep wiring simple in a two-wire alarm circuit\u003c\/li\u003e\n\u003cli\u003ePulsed tone around 2900 Hz at about 3 beeps per second for a clear warning sound\u003c\/li\u003e\n\u003cli\u003eSound output reaches 103 dB at 30V DC and 85 dB at 5V DC\u003c\/li\u003e\n\u003cli\u003eThreaded body and locking ring hold the alarm securely in the panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis alarm works in Blue Sea Systems setups that need an external audible warning, including m-LVD units and the M2 monitoring range. It also fits other DC alarm circuits that switch or supply 5 to 30V DC and need a compact panel-mount sounder.\u003c\/p\u003e\u003cp\u003eThe 1 inch round cutout is the main fit check before ordering. That makes it an easy match for many helm dashboards, switch panels, and instrument panels where space is limited but the warning still needs to be heard clearly.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is through the front of the panel, then secured from behind with the attachment ring. The quick connect terminals help when access is tight or when the panel may need to come apart later for service.\u003c\/p\u003e\u003cp\u003eOnce mounted, the bezel can be turned to bring the alarm level up or down to suit the location. That is useful on boats where the same style of alarm may be used in different spaces with very different ambient noise.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a practical choice for boats that use panel alarms for battery, bilge, tank, or other monitored DC conditions and want a warning that is easy to hear without adding a larger siren. It suits owners and installers looking for a compact alarm that fits common marine panel layouts and straightforward 12V or 24V electrical systems.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023052796085,"sku":"QBP902833","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329832_qbp902833.jpg?v=1780191639"},{"product_id":"qbp623675","title":"Blue Sea Systems Remote Control Panel, for ML-Series Switches and ML-ACR, 12\/24V DC, 3-Position","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1147 is a remote control panel for managing two ML-Series switches and one ML-Series Automatic Charging Relay from one 3-position panel. It works with 12V DC and 24V DC systems, and the panel measures 4.75 in high by 4.88 in wide with a 2.00 in depth, which helps when you are checking space behind a helm, nav station, or utility panel.\u003c\/p\u003e\u003cp\u003eIt comes with two 2145 SPDT Remote Control Contura switches with (ON)-OFF-(ON) action and one 2146 SPDT Remote Control Contura switch with ON-OFF-ON action. Lockout slides on the panel help reduce accidental switching when the boat is underway, tied up, or being serviced.\u003c\/p\u003e\u003cp\u003eThis panel suits boats that already use Blue Sea ML-Series remote battery switching and want the controls in a more accessible location than the battery compartment. Keeping switching and ACR control together at the helm or another frequently used station makes day-to-day operation easier and keeps the layout easier to read.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eControls two ML-Series switches and one ML-Series Automatic Charging Relay from one panel\u003c\/li\u003e\n\u003cli\u003e3-position layout for battery switching and charging relay control\u003c\/li\u003e\n\u003cli\u003eWorks with 12V DC and 24V DC nominal systems\u003c\/li\u003e\n\u003cli\u003eLockout slides help reduce accidental switch movement\u003c\/li\u003e\n\u003cli\u003ePanel size is 4.75 in x 4.88 in with 2.00 in depth for installations where rear clearance matters\u003c\/li\u003e\n\u003cli\u003eIncludes illustrated labels, with a larger range of label options available for more customized panel layouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe 1147 is not a general-purpose switching panel. It is set up for Blue Sea ML-Series remote switching hardware, so fit starts with the electrical layout already on board. Check that your system uses two ML-Series switches and one ML-Series ACR, and confirm there is enough room for the panel depth and wiring behind the mounting surface.\u003c\/p\u003e\u003cp\u003eIt is a good match for cruising boats, fishing boats, and other setups where the high-current switching hardware stays close to the batteries while normal control is moved to the helm or another protected station. That arrangement keeps the operator from having to go back to the battery area each time a switch or relay function needs attention.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe included switch set matters during installation. The two 2145 switches use momentary (ON)-OFF-(ON) action, while the 2146 switch uses maintained ON-OFF-ON action. Match those functions to the ML devices in your wiring plan before final assembly so the panel logic stays clear and consistent.\u003c\/p\u003e\u003cp\u003eClear labeling matters on a panel like this because battery isolation and charging functions need to be understood at a glance by anyone operating or servicing the boat. The included illustrated labels help with a standard layout, and the panel can support more specific labeling where the system calls for it.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e(2) 2145 SPDT Remote Control Contura Switches with (ON)-OFF-(ON) action\u003c\/li\u003e\n\u003cli\u003e(1) 2146 SPDT Remote Control Contura Switch with ON-OFF-ON action\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023052828853,"sku":"QBP623675","price":221.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329884_qbp623675.jpg?v=1780191639"},{"product_id":"qbp205343","title":"Blue Sea Systems C-Series Triple-Pole Flat Rocker Circuit Breaker, 50A, 120\/240V AC","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1168 is a 120\/240V AC 360 Panel System module with one installed 50A triple-pole C-Series flat rocker breaker. It is built for boats that need a compact main AC breaker section in a Blue Sea modular panel layout, with a rocker-style actuator and backlit label positions for easier circuit identification.\u003c\/p\u003e\u003cp\u003eThis module measures 4.75 in high, 4.88 in wide, and 3.00 in deep. The layout includes spare rocker apertures that can be used for single-pole 120V AC or double-pole 240V AC branch circuits, which helps when you are building out a panel around the way the boat is actually wired.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOne installed 7565 C-Series flat rocker breaker with triple-pole 50A AC main protection\u003c\/li\u003e\n\u003cli\u003eBuilt for 120\/240V AC systems\u003c\/li\u003e\n\u003cli\u003eBacklit circuit label positions with green LED illumination\u003c\/li\u003e\n\u003cli\u003e360 Panel System configuration includes spare rocker apertures for single-pole 120V AC or double-pole 240V AC branch circuits\u003c\/li\u003e\n\u003cli\u003eCompact panel size of 4.75 in x 4.88 in with 3.00 in depth behind the panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis module fits best in a Blue Sea 360 Panel System where a triple-pole 50A main breaker is required for a 120\/240V AC service. The main fit checks are your AC system voltage, the need for a triple-pole breaker, and the space available behind the mounting surface for the 3.00 in depth.\u003c\/p\u003e\u003cp\u003eIt is a practical match for refits and new installations on larger cruising boats, sportfishing boats, and other vessels that carry a 120\/240V AC distribution system rather than a simple single-voltage AC setup.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eOn board, this type of module usually sits at the main AC distribution point where incoming AC service is brought into the panel. The flat rocker format keeps operation straightforward, and the illuminated label area helps when the panel is mounted in a cabin, utility area, or another space that is often checked in low light.\u003c\/p\u003e\u003cp\u003eBecause this is part of the 360 Panel System, it makes sense when you are planning a panel with more than one function and want the breaker section to sit cleanly with the rest of the modules. The spare rocker apertures also leave room for additional branch circuit switching within the same panel layout.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023052861621,"sku":"QBP205343","price":539.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329834_qbp205343.jpg?v=1780191639"},{"product_id":"qbp741894","title":"Blue Sea Systems 360 Panel ELCI Main Circuit Breaker Panel, 120V AC, 30A, Double Pole, 4 Branch Positions, Horizontal","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1193 is a horizontal 120V AC shore power panel with a 30A double pole ELCI main breaker and four 15A branch breakers already installed. It combines main shore power protection and branch circuit distribution in one panel, with a 30 mA leakage trip level at the ELCI main breaker for whole-boat shore power protection.\u003c\/p\u003e\u003cp\u003eThis panel is laid out for boats that need a compact AC distribution point without giving up clear status indication. The face includes a red reverse polarity LED, backlit label positions, and ON indicator LEDs, so routine checks are easier in a cabin, galley, utility space, or electrical locker. Overall size is 9.25 in wide, 4.75 in high, and 3.99 in deep.\u003c\/p\u003e\u003cp\u003eFor buyers comparing panel options, the key point here is that this is not just a branch panel. It is a five-position horizontal panel that starts with a 30A ELCI main and then adds four protected branch circuits, which makes it a practical fit for boats running a straightforward 120V AC shore power setup.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e30A double pole ELCI main breaker for 120V AC shore power systems\u003c\/li\u003e\n\u003cli\u003e30 mA leakage trip protection at the main breaker, along with overcurrent protection\u003c\/li\u003e\n\u003cli\u003eFour 15A single pole branch breakers installed for downstream AC circuits\u003c\/li\u003e\n\u003cli\u003eRed reverse polarity LED for a quick visual check when connecting to shore power\u003c\/li\u003e\n\u003cli\u003eBacklit circuit label positions and ON indicator LEDs for easier reading in low light\u003c\/li\u003e\n\u003cli\u003eHorizontal five-position layout that groups the main and branch circuits on one panel face\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis panel belongs in a 120V AC shore power system built around a 30A main service. The installed breaker mix suits boats with a modest number of branch circuits, where the AC loads are split across four 15A branches and protected at the panel rather than by separate branch hardware elsewhere.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm the available panel space against the horizontal format and the overall dimensions. It is also worth checking that your electrical plan calls for an ELCI main at the panel, since that function is built into the main breaker on this unit and is a core part of how it is used on board.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe panel includes a square-format AC label set, which helps when finishing the circuit schedule after wiring. That makes it easier to leave each branch clearly marked for day-to-day use and later service, especially on boats where shore power loads are shared between outlets, chargers, water heating, or similar AC equipment.\u003c\/p\u003e\u003cp\u003eThis is a good match for cruisers, sailboats, and small to mid-size powerboats that need shore power protection and branch distribution in one place. It works best in installations where the owner or installer wants a clean horizontal layout, clear status lights, and a panel that already includes the main breaker and four branch breakers.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOne 30A double pole ELCI main circuit breaker\u003c\/li\u003e\n\u003cli\u003eFour 15A A-Series flat rocker single pole branch circuit breakers\u003c\/li\u003e\n\u003cli\u003e4206 AC panel basic square format label set\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023052894389,"sku":"QBP741894","price":1084.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329887_qbp741894.jpg?v=1780191640"},{"product_id":"qbp310927","title":"Blue Sea Systems AC Branch Circuit Breaker Panel, 120V, 4-Position, 100A","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1210 is a 120V AC 4-position panel for managing branch circuits on board. It is rated for 120V AC service, supports up to 100A at the panel, and fits into a compact footprint with a height of 4.75 in, width of 4.88 in, and depth of 3.00 in.\u003c\/p\u003e\u003cp\u003eThis panel gives you four breaker positions in a format that works well where space is limited but clean AC distribution still matters. All circuit label positions are backlit, and each circuit position has an ON indicator LED, which makes it easier to check circuit status from the helm, inside the cabin, or in other lower-light areas on board.\u003c\/p\u003e\u003cp\u003eIt is supplied with four single-pole 15A A-Series flat rocker circuit breakers and a basic AC label kit, so the panel arrives ready for a straightforward branch-circuit layout. This is part of the 360 Panel System, which uses an open-frame approach that can make panel planning easier when you are building out or updating an AC section.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFour 120V AC branch positions for a compact onboard distribution setup\u003c\/li\u003e\n\u003cli\u003e100A maximum panel amperage when the installation uses correctly sized wire and overcurrent protection\u003c\/li\u003e\n\u003cli\u003eBacklit circuit label positions for easier identification at night or in enclosed spaces\u003c\/li\u003e\n\u003cli\u003eON indicator LEDs in every circuit position for quick visual status checks\u003c\/li\u003e\n\u003cli\u003eIncludes four 15A single-pole A-Series flat rocker circuit breakers\u003c\/li\u003e\n\u003cli\u003eIncludes 4206 basic AC label kit with 30 black square labels\u003c\/li\u003e\n\u003cli\u003eCompact 4.75 in x 4.88 in face size with 3.00 in depth for tighter mounting areas\u003c\/li\u003e\n\u003cli\u003eCompatible with the 360 Panel System layout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis panel is intended for 120V AC marine electrical systems. It is a practical choice when you need a small branch panel for a few dedicated AC loads or when you are adding an extra AC distribution point in a boat that already has a main shore power or generator feed handled elsewhere.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm that your system is 120V AC, not 12V or 24V DC, and check that your mounting location has enough clearance for the 3.00 in depth behind the panel. The panel amperage rating also needs to be matched with the wire size and overcurrent protection used in the installation.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe included breakers and label kit help keep the layout clean from the start, which is useful when you want circuits identified clearly for troubleshooting and routine checks. A panel like this suits owners, yards, and refit projects that want a compact AC branch panel with labeled circuits and visible status indication rather than a blank panel that still needs to be built out.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e120V AC 4-position panel\u003c\/li\u003e\n\u003cli\u003eFour A-Series flat rocker circuit breakers, single-pole 15A\u003c\/li\u003e\n\u003cli\u003e4206 basic AC label kit with 30 black square labels\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023052992693,"sku":"QBP310927","price":351.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329888_qbp310927.jpg?v=1780191640"},{"product_id":"qbp407214","title":"Blue Sea Systems 360 Panel Mounting Kit, For VSM 422","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1325 is a 360 Panel mounting kit used to install a VSM 422 monitor into an existing 360 Panel. It includes the mounting bezel and eight flat head screws: four #6-32 x 1.125 in. screws and four #6-32 x 1 in. flat head machine screws.\u003c\/p\u003e\u003cp\u003eThis is a practical fit for boats already built around the Blue Sea Systems 360 Panel format at the helm or main electrical panel. It is mounting hardware only, so the main check before ordering is that your setup uses a VSM 422 and an existing 360 Panel location where the monitor needs to be secured in the panel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for mounting a VSM 422 into an existing Blue Sea Systems 360 Panel\u003c\/li\u003e\n\u003cli\u003eIncludes the mounting bezel needed for the panel installation\u003c\/li\u003e\n\u003cli\u003eHardware pack includes four #6-32 x 1.125 in. flat head screws and four #6-32 x 1 in. flat head machine screws\u003c\/li\u003e\n\u003cli\u003eUseful when replacing hardware or adding a VSM 422 within a modular 360 Panel layout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is specific to the VSM 422 and the 360 Panel system. It suits refit work where the boat already has a 360 Panel and the monitor needs to sit within that panel layout instead of being treated as a separate loose component.\u003c\/p\u003e\u003cp\u003eIt makes the most sense for owners updating a helm or electrical panel where system information is viewed regularly and the panel layout needs to stay consistent. For catalog matching, the two key fit points are VSM 422 compatibility and an existing 360 Panel installation.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMounting bezel\u003c\/li\u003e\n\u003cli\u003eFour #6-32 x 1.125 in. flat head screws\u003c\/li\u003e\n\u003cli\u003eFour #6-32 x 1 in. flat head machine screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023053025461,"sku":"QBP407214","price":14.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329976_qbp407214.webp?v=1780191640"},{"product_id":"qbp553767","title":"Blue Sea Systems AC Insulating Cover, 1 Module","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1331 is an AC insulating cover for one module in a compatible Blue Sea Systems panel. It isolates 360 panel AC components and circuits from DC system elements, helps meet ABYC safety requirements where AC and DC loads share the same panel area, and adds mechanical protection when the back of the panel extends into a locker.\u003c\/p\u003e\u003cp\u003eThis is a modular cover piece that works with interlocking SIDE, TOP, and END sections, so the enclosure can be built around larger AC components when needed. Wire breakouts allow cable runs in any direction, which helps when the wiring path has to turn quickly behind the panel or space is limited.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module AC insulating cover for compatible Blue Sea Systems panel layouts\u003c\/li\u003e\n\u003cli\u003eIsolates 360 panel AC components and circuits from DC system elements\u003c\/li\u003e\n\u003cli\u003eMeets ABYC safety requirements for panels with combined AC and DC loads\u003c\/li\u003e\n\u003cli\u003eAdds mechanical protection behind panels that protrude into lockers\u003c\/li\u003e\n\u003cli\u003eInterlocking SIDE, TOP, and END pieces can be stacked around larger AC components\u003c\/li\u003e\n\u003cli\u003eWire breakouts allow conductor access from any direction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is the 1-module version, so fit depends on the panel layout it is being used with. It is used with compatible Blue Sea Systems AC panels across selected 120V, 230V, and 120\/240V configurations, including source selector, ELCI, and main plus branch layouts. Matching the panel model is the right way to confirm fit before installation.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eThis cover makes the most sense where an AC panel is mounted against a locker, liner, or service space that can be reached from behind. It creates an insulated barrier around the back of the panel while still leaving room to route conductors through the breakout openings.\u003c\/p\u003e\u003cp\u003eIt also makes practical sense on boats that carry both AC and DC circuits in the same electrical area and need better separation between those systems. That is common on cruising boats, workboats, and larger center consoles where panels are often installed in tight interior spaces.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023053058229,"sku":"QBP553767","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329889_qbp553767.jpg?v=1780191641"},{"product_id":"qbp244072","title":"Blue Sea Systems M-Series Dual Circuit Plus Battery Management Panel, 12V, 3 Position, Vertical","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1408 is a 12V DC battery management and circuit breaker panel that combines an M-Series Dual Circuit Plus battery switch, a 100A main breaker, and three branch circuit positions in one vertical layout. It separates the engine circuit from the house circuit, allows emergency cross-connect between isolated battery banks, and helps reduce voltage sag to electronics during engine cranking.\u003c\/p\u003e\u003cp\u003eThe panel face measures 7.75 x 4.88 inches with an installed depth of 3.50 inches, so it works where space is limited but you still want the switch and circuit protection gathered in one spot. Backlit label windows and ON indicator LEDs make the panel easier to read at the helm, inside a cabin, or in a dim electrical space.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12V DC battery management panel with one 100A main breaker and three branch circuit positions\u003c\/li\u003e\n\u003cli\u003eBuilt-in M-Series Dual Circuit Plus battery switch isolates engine and house banks and allows emergency cross-connect\u003c\/li\u003e\n\u003cli\u003eThree push-button reset-only 15A branch breakers are included for protected circuits where switching is handled elsewhere\u003c\/li\u003e\n\u003cli\u003eBacklit label positions and ON indicator LEDs at each circuit help with low-light checks and troubleshooting\u003c\/li\u003e\n\u003cli\u003eVertical panel footprint measures 7.75 x 4.88 inches with 3.50 inches of depth behind the mounting surface\u003c\/li\u003e\n\u003cli\u003eFront-access labels and snap-on end plates make service work simpler and keep the finished panel looking tidy\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis panel is for 12V DC systems and suits boats that keep start and house batteries separate. The branch positions use reset-only breakers, so they fit installations where the load is switched somewhere else or where the circuit stays available as a 24-hour feed.\u003c\/p\u003e\u003cp\u003eIt is a good match for owners who want the battery switching point and main DC protection in one panel instead of spreading those parts across different locations. Before ordering, confirm the mounting cutout, the 3.50 inch behind-panel depth, and the current needs of the branch circuits you plan to protect.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eLabels can be removed and replaced from the front, which makes future circuit changes easier after the panel is mounted. Snap-on end plates cover the mounting screws, so the finished installation looks cleaner on a visible bulkhead or helm panel.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eM-Series Dual Circuit Plus, Main + 3 Position CLB Vertical panel assembly\u003c\/li\u003e\n\u003cli\u003eThree 15A push-button reset-only quick connect circuit breakers\u003c\/li\u003e\n\u003cli\u003eOne 100A C-Series flat rocker single-pole circuit breaker\u003c\/li\u003e\n\u003cli\u003eOne waterproof DC label kit with 30 black square labels\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023053090997,"sku":"QBP244072","price":502.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329835_qbp244072.jpg?v=1780191641"},{"product_id":"qbp707387","title":"Blue Sea Systems 8 Position Switch CLB + Meter Vertical, 12V DC, 80A per Bus","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1463 is a vertical 8-position DC switch panel with an analog voltmeter for 12V systems. It combines eight switched branch circuits with a meter that reads 8 to 16V DC, and the selector toggle lets you check up to three battery banks from the panel. The panel measures 10.75 x 4.88 x 3.50 inches and carries an 80A maximum amperage rating.\u003c\/p\u003e\u003cp\u003eAs supplied, it comes set up with eight 10A push-button reset quick-connect circuit breakers and eight SPST ON-OFF rocker switches. That makes it a practical fit for boats that need one compact panel for common 12V loads while keeping battery voltage easy to check during normal use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eEight switched DC circuits with individual SPST ON-OFF rocker switches\u003c\/li\u003e\n\u003cli\u003eBuilt-in analog voltmeter with an 8 to 16V DC range\u003c\/li\u003e\n\u003cli\u003eMeter selector toggle for checking up to three battery banks\u003c\/li\u003e\n\u003cli\u003e80A maximum amperage rating for the panel\u003c\/li\u003e\n\u003cli\u003eVertical format that fits a narrow mounting area\u003c\/li\u003e\n\u003cli\u003ePanel size of 10.75 x 4.88 inches with 3.50 inches of depth behind the face\u003c\/li\u003e\n\u003cli\u003eSupplied with eight 10A push-button reset quick-connect circuit breakers\u003c\/li\u003e\n\u003cli\u003eIncludes a square-format label kit with 30 black labels for circuit identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis panel is meant for 12V DC distribution, so it suits boats that run a standard 12V house or accessory system and want switching and voltage monitoring in one place. The narrow vertical layout works well at the helm, nav station, cabin entry, or another bulkhead location where width is limited but you still want eight labeled circuits in easy reach.\u003c\/p\u003e\u003cp\u003eBefore installation, check the available depth behind the mounting surface and match each branch load to the supplied 10A breaker setup. It is a good match for refits where an older eight-circuit panel is being replaced, or for new builds that need a clean, organized panel for lights, electronics, pumps, and other everyday 12V services.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e8 x 7054 push-button reset only quick-connect circuit breakers, 10A\u003c\/li\u003e\n\u003cli\u003e8 x 7480 SPST ON-OFF rocker switches\u003c\/li\u003e\n\u003cli\u003e1 x 8003 DC analog voltmeter, 8 to 16V DC\u003c\/li\u003e\n\u003cli\u003e1 x 4205 basic DC label kit with 30 black square labels\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023053287605,"sku":"QBP707387","price":635.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329893_qbp707387.jpg?v=1780191641"},{"product_id":"qbp380116","title":"Blue Sea Systems PowerBar BusBar Cover, For 2104, Polycarbonate","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 2708 is a busbar cover sized for the Blue Sea Systems PowerBar 2104. It measures 8.500 x 3.375 x 2.750 inches and fits over the 2104 busbar to put a physical barrier over the connection area while keeping the assembly compact.\u003c\/p\u003e\u003cp\u003eOn a boat, this is the kind of part that helps around exposed high-current distribution points where battery cables, service tools, and nearby hardware can end up close to live studs. It is matched to the 2104 PowerBar, which uses four 3\/8-16 studs and is commonly installed in heavy DC distribution runs.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eExact fit for the Blue Sea Systems PowerBar 2104\u003c\/li\u003e\n\u003cli\u003eCovers the busbar connection area to reduce accidental contact with energized studs and attached cable lugs\u003c\/li\u003e\n\u003cli\u003e8.500 x 3.375 x 2.750 inch overall size helps you check clearance before closing up a battery or distribution space\u003c\/li\u003e\n\u003cli\u003eLow 0.10 lb weight adds protection without adding meaningful load to the installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cover is specific to the PowerBar 2104 and should be treated as a model-specific part rather than a universal busbar cover. For replacement work, the main checkpoint is the base busbar model.\u003c\/p\u003e\u003cp\u003eIt suits installations where the 2104 remains accessible after wiring is complete, such as battery banks, inverter feeds, charging circuits, and other high-amperage DC distribution points.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe cover is easiest to add once cable routing, lug placement, and final torque checks are already finished. Before closing the busbar, confirm that the mounting area has enough room for the 2.750 inch height and the full cover footprint.\u003c\/p\u003e\u003cp\u003eThis part makes the most sense for installers and boat owners who want cleaner protection around an exposed 2104 busbar in spaces that may be reached during routine service or electrical work.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023065673909,"sku":"QBP380116","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329925_qbp380116.jpg?v=1780191642"},{"product_id":"qbp913358","title":"Blue Sea Systems DualBus 100 BusBar Cover, For DualBus 2701, Polycarbonate","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 2709 is a snap-on cover for the Blue Sea Systems 2701 DualBus 100A bus bar. It measures 4-3\/16 in. long, 7\/8 in. high, and 2-1\/2 in. wide, so it matches the 2701 footprint and adds a protective layer over the terminal area without taking up much extra space.\u003c\/p\u003e\u003cp\u003eThis cover leaves wire access open while helping reduce accidental contact with the terminal studs. On boats where the bus bar sits behind a helm, inside an electrical locker, or under a console, that extra protection is useful during wiring, inspection, and routine service.\u003c\/p\u003e\u003cp\u003eThe housing is polycarbonate and the piece weighs about 0.03 lb, so it is easy to handle during installation. This is a fit-specific accessory rather than a universal cover, and the key compatibility point is the Blue Sea Systems 2701 DualBus.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade to fit the Blue Sea Systems 2701 DualBus 100A bus bar\u003c\/li\u003e\n\u003cli\u003eSnap-on design mounts over the terminal studs\u003c\/li\u003e\n\u003cli\u003eLeaves wire access open for routing and service work\u003c\/li\u003e\n\u003cli\u003eHelps reduce accidental contact around exposed bus connections\u003c\/li\u003e\n\u003cli\u003ePolycarbonate construction\u003c\/li\u003e\n\u003cli\u003eCompact size at 4-3\/16 in. x 2-1\/2 in. x 7\/8 in.\u003c\/li\u003e\n\u003cli\u003eLightweight part at about 0.03 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eUse this cover when your distribution point is a Blue Sea Systems 2701 DualBus. It is not a general bus bar shield for other stud layouts or terminal counts. In refit work, that matters because the 2701 combines positive and negative buses on one block, and this cover follows that specific layout.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe cover snaps onto the terminal studs after the bus bar has been mounted and wired. Leave enough clearance above the bus bar for the cover height and for the wire bend coming off the terminals. That keeps the cover seated properly and makes later inspection easier.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis part makes sense on boats that use a compact distribution point in a console, cabin locker, electronics space, or other protected electrical area where hands and tools may come close to the bus bar during service. It is a good match for owners and installers who want a neater finish around the 2701 and more separation around exposed terminals without changing the bus layout itself.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023065706677,"sku":"QBP913358","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329926_qbp913358.jpg?v=1780191642"},{"product_id":"qbp844794","title":"Blue Sea Systems DualBus 100 BusBar Cover, Snap-On, Polycarbonate","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 2710 is a snap-on cover for the DualBus 2702 busbar, sized to shield the terminal area while still leaving wire runs accessible. It is a small but useful finishing piece when you want the busbar installation to be safer and more protected inside a battery compartment, console, or distribution area.\u003c\/p\u003e\u003cp\u003eThis cover measures 6-3\/8 in. long, 2-3\/8 in. wide, and 7\/8 in. high, with a weight of 0.04 lb. It fits the Blue Sea Systems 2702 DualBus 100A 10-circuit busbar and adds a physical barrier over the terminal area where accidental contact is most likely during service or when gear is stored close by.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade to fit the Blue Sea Systems DualBus 2702 busbar\u003c\/li\u003e\n\u003cli\u003eSnap-on attachment at the terminal studs for a clean, straightforward fit\u003c\/li\u003e\n\u003cli\u003eOpen access around the wiring path so ring terminals and cable runs are not boxed in\u003c\/li\u003e\n\u003cli\u003ePolycarbonate construction\u003c\/li\u003e\n\u003cli\u003eCompact size at 6-3\/8 in. x 2-3\/8 in. x 7\/8 in.\u003c\/li\u003e\n\u003cli\u003eAdds protection against accidental contact at the terminal studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cover is for the 2702 DualBus 100A busbar and should be matched to that part before ordering. It is not a universal busbar cover, so the fit depends on using the correct Blue Sea Systems base unit already mounted in the boat.\u003c\/p\u003e\u003cp\u003eFor owners cleaning up a DC distribution area, this is the kind of part that helps once the busbar is already in place and wired. It suits refits and new installations where the positive and negative distribution point is mounted in a spot that may be reached during routine battery or wiring service.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward once the compatible busbar is in place. The cover snaps onto the terminal stud area and keeps the layout accessible, so you can still route and inspect connected wires without dealing with a fully enclosed housing.\u003c\/p\u003e\u003cp\u003eThis makes sense on boats where the busbar sits behind an electrical panel, inside a console, or near battery switching gear and chargers. It is a good match for owners who want a cleaner finish and an added layer of protection around an exposed distribution block.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023065739445,"sku":"QBP844794","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329927_qbp844794.jpg?v=1780191643"},{"product_id":"qbp844843","title":"Blue Sea Systems MiniBus BusBar Cover, For 2304 and 2305","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 2713 is a MiniBus busbar cover made to fit Blue Sea Systems 2304 and 2305 busbars in installations where space is tight. It matches MiniBus setups used up to 100A AC\/DC, with system limits of 300V AC maximum and 48V DC maximum, which helps confirm fit in an existing distribution point.\u003c\/p\u003e\u003cp\u003eThis cover adds a barrier over the connection area while still leaving the hardware and wire layout visible through the clear polycarbonate. That is useful on boats where the busbar sits behind a helm panel, inside a console, or near battery switching and distribution gear that gets opened for service.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade to fit Blue Sea Systems MiniBus busbars PN 2304 and 2305\u003c\/li\u003e\n\u003cli\u003eSuited to compact electrical installations where space around the busbar is limited\u003c\/li\u003e\n\u003cli\u003eReinforced polycarbonate base with a clear polycarbonate cover\u003c\/li\u003e\n\u003cli\u003eKeeps the terminal area visible for inspection and troubleshooting\u003c\/li\u003e\n\u003cli\u003eHelps cover exposed connection points to reduce accidental contact during service\u003c\/li\u003e\n\u003cli\u003eMatched to MiniBus applications rated up to 100A AC\/DC, 300V AC maximum, and 48V DC maximum\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a direct-fit cover for the matching Blue Sea MiniBus units, not a universal busbar cover. It is the right match when you already have a 2304 or 2305 busbar installed and want to enclose the terminal area without changing the layout of the wiring or moving to a larger distribution block.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis cover works well in smaller DC distribution spaces where several ring terminals land on one MiniBus and the area still needs to stay accessible for checks and maintenance. It suits compact electrical panels on center consoles, small cruisers, sailboat auxiliaries, and other installations where keeping the busbar protected and visible matters more than adding bulk.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023065772213,"sku":"QBP844843","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329844_qbp844843.webp?v=1780191643"},{"product_id":"qbp953316","title":"Blue Sea Systems Common BusBar Cover, For 2301 and 2303","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 2715 is a common busbar cover for Blue Sea Systems 2301 and 2303 busbars. It fits the 2301 Common 150A BusBar - 10 Gang and the 2303 Common 150A BusBar - Four 1\/4\"-20 Studs, giving those connection points a matching protective cover without changing the busbar itself.\u003c\/p\u003e\u003cp\u003eThis cover weighs 0.08 lb (0.04 kg) and is made from polycarbonate, so it adds very little bulk while helping shield exposed terminals from accidental contact. On a boat, that matters most in battery switch compartments, DC distribution areas, and other electrical spaces where busbars are mounted in the open.\u003c\/p\u003e\u003cp\u003eIt is a fit-specific part rather than a universal cover. If your setup uses a bare 2301 or 2303 busbar and you want the same covered layout found on the factory covered versions, this is the matching accessory.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade to fit Blue Sea Systems 2301 and 2303 common 150A busbars\u003c\/li\u003e\n\u003cli\u003ePolycarbonate cover adds a protective barrier over exposed busbar connections\u003c\/li\u003e\n\u003cli\u003eLow added weight at 0.08 lb (0.04 kg)\u003c\/li\u003e\n\u003cli\u003eHelps clean up open distribution points while keeping the busbar layout visible through the cover\u003c\/li\u003e\n\u003cli\u003eUseful when upgrading a bare busbar installation to a covered setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cover fits two specific Blue Sea Systems busbars only: the 2301 with 10 screw terminals and 2 stud terminals, and the 2303 with four 1\/4\"-20 studs. That makes fit easy to confirm if you already know the busbar part number or can match the terminal layout in your panel.\u003c\/p\u003e\u003cp\u003eFor replacement work, it is a good match when the original cover is missing or when an existing 2301 or 2303 installation was built without one. It is not a general busbar cover for other Blue Sea busbar families or for different terminal layouts.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the cover after the busbar is mounted and the conductors are terminated correctly. Before fitting it, check that cable lugs, terminal hardware, and wire exit paths are already arranged the way you want, especially in tight compartments where access becomes harder once the area is covered.\u003c\/p\u003e\u003cp\u003eBecause this is a simple protective cover rather than a powered component, there is no electrical setup involved. The main check is physical fit with the matching 2301 or 2303 busbar already in place.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis part makes the most sense for owners and installers tidying up exposed distribution points in service panels, battery compartments, and other interior electrical spaces. It is especially useful on boats where open busbar studs are easy to brush against during maintenance or troubleshooting.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023065804981,"sku":"QBP953316","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329928_qbp953316.jpg?v=1780191643"},{"product_id":"qbp246710","title":"Blue Sea Systems MaxiBus Insulating Cover, for 2105 \u0026 2126","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 2718 is an insulating cover for Blue Sea MaxiBus 2105 and 2126 busbars. It adds a protective barrier over the connection area, includes breakouts for wire routing, and meets ABYC insulation requirements. The base is reinforced nylon, the cover is clear polycarbonate, and the overall length is 8.78 in. (223.1 mm).\u003c\/p\u003e\u003cp\u003eOn a boat, this is the part that helps finish a high-current DC busbar installation so exposed positive connections are not left open in a battery compartment, electrical locker, or service space where tools and loose gear can make contact. It is a fit-specific accessory, so the busbar part number matters more than the general layout of the panel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits Blue Sea MaxiBus 2105 and 2126 busbars\u003c\/li\u003e\n\u003cli\u003eBreakouts allow wire runs to enter and exit while keeping terminals covered\u003c\/li\u003e\n\u003cli\u003eMeets ABYC insulation requirements for protected connections\u003c\/li\u003e\n\u003cli\u003eReinforced nylon base with a clear polycarbonate cover\u003c\/li\u003e\n\u003cli\u003eMounting pattern includes four holes for #10 or M5 pan head screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cover matches the layout used on Blue Sea MaxiBus 2105 and 2126 busbars. Checking the part number on the installed busbar before ordering is the safest way to confirm fit, especially when a boat has been rewired or the original installation notes are incomplete.\u003c\/p\u003e\u003cp\u003eBecause this is a protective cover and not the busbar itself, it does not change current rating or system capacity. Its job is to shield the connection points while still leaving room for cable routing and label placement.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe cover fastens over the busbar assembly and uses four mounting locations. Planning cable entry before tightening it down helps keep the breakouts aligned with the wire runs already landed on the busbar, which makes the finished installation cleaner and easier to service later.\u003c\/p\u003e\u003cp\u003eThis is a practical add-on for battery distribution areas, inverter and charger feeds, and other high-current DC points where the busbar stays accessible for inspection but should not remain exposed.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis cover is a good match for owners and installers cleaning up an exposed distribution point during a refit, replacing missing insulation after service work, or finishing a new DC power layout. It makes the most sense anywhere a MaxiBus is mounted close to stored gear, battery cabling, or routine maintenance access.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023065837749,"sku":"QBP246710","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329930_qbp246710.jpg?v=1780191643"},{"product_id":"qbp897893","title":"Blue Sea Systems MaxiBus Insulating Cover, For 2127 and 2128","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 2719 is an insulating cover for Blue Sea Systems 2127 and 2128 MaxiBus busbars. It snaps over the busbar to cover exposed connection points, which helps reduce accidental contact around high-current DC distribution areas on board.\u003c\/p\u003e\u003cp\u003eIt fits the 2127 MaxiBus 250A busbar with four 5\/16-18 studs and the 2128 MaxiBus 250A busbar with two 5\/16-18 studs plus six #10-24 screw terminals. Side breakouts let cables exit while the busbar stays covered, and the cover meets ABYC insulation requirements.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade specifically for Blue Sea Systems 2127 and 2128 MaxiBus busbars\u003c\/li\u003e\n\u003cli\u003eSnap-on insulating cover that shields exposed terminals and connection hardware\u003c\/li\u003e\n\u003cli\u003eSide breakouts allow cable runs to exit while the busbar remains covered\u003c\/li\u003e\n\u003cli\u003eMeets ABYC insulation requirements\u003c\/li\u003e\n\u003cli\u003eMatches the 2127 four-stud layout and the 2128 stud-and-screw layout\u003c\/li\u003e\n\u003cli\u003eUseful where a MaxiBus is mounted near batteries, behind panels, or in other areas where exposed connections need added insulation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cover is a fit-specific accessory for the Blue Sea Systems 2127 and 2128 MaxiBus range, not a universal busbar cover. That makes it the right part when your system already uses one of those MaxiBus layouts and you want the protection to match the terminal pattern correctly.\u003c\/p\u003e\u003cp\u003eOn a boat, that usually matters most in battery compartments, distribution spaces, and other service areas where tools, loose gear, or routine maintenance can bring something close to live bus connections. The cover adds insulation without changing the underlying busbar layout.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe 2719 is meant to be fitted over the completed busbar assembly once the conductors and terminals are in place. The side breakouts give the cables a defined exit path, so the cover can sit properly without forcing an awkward cable bend at the busbar.\u003c\/p\u003e\u003cp\u003eIt is a straightforward finishing piece for installations that use a MaxiBus as a central DC connection point and want the exposed hardware covered while keeping the system serviceable.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023065870517,"sku":"QBP897893","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329779_qbp897893.jpg?v=1780191644"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/collections\/1279136_blue-sea-systems.webp?v=1768106121","url":"https:\/\/www.qualityboatparts.com\/collections\/blue-sea-systems.oembed?page=9","provider":"Quality Boat Parts","version":"1.0","type":"link"}