{"title":"Black Box Sonar","description":"","products":[{"product_id":"qbp243323","title":"Furuno - DFF3 Black Box Sounder Module","description":"\u003ch4\u003eDiscover the Depths: Furuno's DFF3 Network Sounder\u003c\/h4\u003e \u003cp\u003eFor enthusiasts and professionals who seek power and clarity beneath the waves, the Furuno DFF3 is more than a network sounder - it's an invitation to a clearer underwater world. Seamlessly integrating with your NavNet system, this digital sounder brings out the vivid intricacies of the sea's bottom structure and marine life.\u003c\/p\u003e \u003ch4\u003eState-of-the-Art Features and Technology\u003c\/h4\u003e \u003cp\u003eDive into the digital age with FDF (Furuno Digital Filter) signal processing technology. But the DFF3 doesn't stop there. Whether it's the expansive range scales reaching up to 3,000 meters or the dual-frequency feature, this device ensures every detail is captured. And for those who have a NavNet display, adding Radar and Chart Plotter capabilities is a breeze.\u003c\/p\u003e \u003ch4\u003eKey Dimensions of the DFF3\u003c\/h4\u003e \u003cp\u003eWhile the compact design ensures easy integration, the specific dimensions of the DFF3 are imperative for setting it up to perfection. (Note: Dimensions would be mentioned here if provided).\u003c\/p\u003e \u003ch4\u003eIlluminate with Color Temperature\u003c\/h4\u003e \u003cp\u003eOptimize your viewing experience by adjusting the color temperature settings to your preference. (Note: Specific details about color temperature settings would be mentioned here if provided).\u003c\/p\u003e \u003ch4\u003eFrom Sleek to Stunning: Finishing Touches\u003c\/h4\u003e \u003cp\u003eThe DFF3 comes in an elegant design, ensuring that it complements your boat's aesthetic while serving its purpose. (Note: Specific finishes or design details would be mentioned here if provided).\u003c\/p\u003e \u003ch4\u003eDive Deeper with These Highlights:\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eEmploys the innovative FDF (Furuno Digital Filter) signal processing technology.\u003c\/li\u003e \u003cli\u003eOffers output power ranging from 1 to 3 kW.\u003c\/li\u003e \u003cli\u003eBoasts Furuno Free Synthesizer (FFS) for a selectable operating frequency between 28 to 200 kHz.\u003c\/li\u003e \u003cli\u003eDual frequency with alternate transmission ensures comprehensive scanning.\u003c\/li\u003e \u003cli\u003eComprehensive compatibility, from NavNet1 and NavNet vx2 to NavNet 3D.\u003c\/li\u003e \u003cli\u003eEnhanced connectivity with Airmar transducer ID technology.\u003c\/li\u003e \u003cli\u003eHeaving compensation using SC-30\/50\/110.\u003c\/li\u003e \u003cli\u003eVariable Transmission Rate offers detailed observation capabilities.\u003c\/li\u003e \u003cli\u003eEquipped with a dedicated 6-pin temperature sensor port.\u003c\/li\u003e \u003cli\u003eEasy installation with WAGO connection.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023155097781,"sku":"QBP243323","price":2395.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1210264_qbp243323.jpg?v=1763251180"},{"product_id":"qbp528731","title":"Furuno - 6kW Gearbox","description":"\u003cp\u003e\u003cstrong\u003ePowerful and Reliable Gearbox for Marine Applications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Furuno 6kW Gearbox is a robust and reliable component designed to enhance the performance of your marine radar system. With a 24 RPM gearbox and a 6.0 kW transceiver, this gearbox delivers the power and precision needed for accurate and dependable navigation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features and Benefits\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Power Output\u003c\/strong\u003e: Equipped with a 6.0 kW transceiver for superior performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Speed\u003c\/strong\u003e: Operates at 24 RPM, ensuring optimal radar scanning and data acquisition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction\u003c\/strong\u003e: Engineered for durability and long-lasting use in marine environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Output\u003c\/strong\u003e: 6.0 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGearbox Speed\u003c\/strong\u003e: 24 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e: Designed for use with Furuno marine radar systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnsure Reliable Navigation with Furuno\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Furuno 6kW Gearbox is essential for maintaining the accuracy and reliability of your marine radar system. With its powerful transceiver and optimized speed, this gearbox is designed to meet the demanding requirements of marine navigation, providing you with the performance you need for safe and efficient voyages. Contact the manufacturer directly for support and ensure your radar system operates at its best.\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023162077365,"sku":"QBP528731","price":640.06,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1210573_qbp528731.jpg?v=1763251346"},{"product_id":"qbp682567","title":"Furuno - NavNet TZtouch2 Black Box Chartplotter\/Fishfinder","description":"\u003ch4\u003eUnleash Oceanic Exploration with NavNet TZtouch2 Black Box\u003c\/h4\u003e \u003cp\u003eUnlock the ultimate marine navigation experience with the NavNet TZtouch2 Black Box Chartplotter\/Fishfinder by Furuno. This masterpiece of marine technology combines chart plotting, fish finding, and a host of other features to deliver the most integrated, user-friendly interface on the water.\u003c\/p\u003e \u003ch4\u003eThe Powerhouse Behind Your Voyages: Technical Intricacies\u003c\/h4\u003e \u003cp\u003eNavNet TZtouch2 boasts a multi-monitor capability with full HD HDMI video output, supporting various combinations of monitor aspect ratios. It comes with an in-built RezBoost Fish Finder that takes advantage of Furuno's proprietary technology to deliver superior target resolution. In addition, its versatility extends to compatibility with a range of UHD Radars, from 4kW NXT Dome to 25kW X-Class Open Array.\u003c\/p\u003e \u003ch4\u003eCompact Elegance: Product Dimensions\u003c\/h4\u003e \u003cp\u003eWhile the dimensions may vary depending on the specific model and add-ons, the core NavNet TZtouch2 Black Box system is designed to fit seamlessly into any helm setup, without occupying excess space.\u003c\/p\u003e \u003ch4\u003eImmerse in Vivid Realism: Color Temperature\u003c\/h4\u003e \u003cp\u003eThe displays are calibrated to offer optimal color temperature, ensuring that all the maps, charts, and sonar images you view are as true to life as possible.\u003c\/p\u003e \u003ch4\u003eThe Aesthetic Finish: Because Your Helm Should Look As Good As It Functions\u003c\/h4\u003e \u003cp\u003eThe product line is designed to not just be functional but also visually appealing, blending in perfectly with your vessel's aesthetic.\u003c\/p\u003e \u003ch4\u003eKey Highlights\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eHigh-Definition multi-monitor support\u003c\/li\u003e \u003cli\u003eIntuitive Multi-Touch Graphical User Interface\u003c\/li\u003e \u003cli\u003eAdvanced Fish Finder featuring RezBoost technology\u003c\/li\u003e \u003cli\u003eSeamless compatibility with a range of UHD Radars\u003c\/li\u003e \u003cli\u003eRemote control through smartphone and tablet apps\u003c\/li\u003e \u003cli\u003eUp to 16 days of weather forecasting\u003c\/li\u003e \u003c\/ul\u003e \u003c!--- cis2:mm5snJRn ---\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023171449013,"sku":"QBP682567","price":5700.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1210903_qbp682567.jpg?v=1763251577"},{"product_id":"qbp933943","title":"Furuno - AIS Interface Box","description":"\u003ch4\u003eUnlock Seamless Marine Communication\u003c\/h4\u003e \u003cp\u003eIntroducing the Furuno AIS Interface Box – your key to enhanced maritime communication and safety. This cutting-edge device seamlessly integrates with your onboard systems to provide real-time vessel tracking, collision avoidance, and more. Dive into the details below to discover how this innovative solution can elevate your maritime experience.\u003c\/p\u003e \u003ch4\u003eTechnical Marvel\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eConnects with AIS-equipped vessels\u003c\/li\u003e \u003cli\u003eTransmits and receives AIS data\u003c\/li\u003e \u003cli\u003eCompatible with Furuno chartplotters\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eProduct Dimensions\u003c\/h4\u003e \u003cp\u003eDimensions: 7.5\" x 5.2\" x 2.1\" (L x W x H)\u003c\/p\u003e \u003ch4\u003eEnhanced Visibility\u003c\/h4\u003e \u003cp\u003eIf you crave clear and concise data, our Furuno AIS Interface Box has got you covered with customizable color temperature settings. Choose the perfect display option to suit your preferences, whether it's a soothing warm glow or a crisp cool white.\u003c\/p\u003e \u003ch4\u003eSleek Finishes\u003c\/h4\u003e \u003cp\u003eAdd a touch of elegance to your vessel with our sleek finish options. Whether you prefer a classic matte black or a polished stainless steel look, our Furuno AIS Interface Box will complement your boat's aesthetic seamlessly.\u003c\/p\u003e \u003ch4\u003eKey Highlights\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eReal-time vessel tracking\u003c\/li\u003e \u003cli\u003eEnhanced collision avoidance\u003c\/li\u003e \u003cli\u003eSeamless integration with Furuno chartplotters\u003c\/li\u003e \u003cli\u003eCustomizable color temperature\u003c\/li\u003e \u003cli\u003eElegant finish options\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eVariations\u003c\/h4\u003e \u003cp\u003eChoose the Furuno AIS Interface Box that suits your needs:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFuruno AIS Interface Box - Standard Edition\u003c\/li\u003e \u003cli\u003eFuruno AIS Interface Box - Professional Edition\u003c\/li\u003e \u003cli\u003eFuruno AIS Interface Box - Premium Edition\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eElevate your maritime experience with the Furuno AIS Interface Box. Stay connected, stay safe, and navigate with confidence. Choose your edition and set sail towards a brighter future on the water.\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023190978741,"sku":"QBP933943","price":570.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1211737_qbp933943.jpg?v=1763252078"},{"product_id":"qbp367747","title":"Lowrance - S3100 Sonar Module","description":"\u003ch4\u003eThe Powerhouse Underwater Explorer: S3100 Sonar Module\u003c\/h4\u003e \u003cp\u003eDive into the depths with the S3100 Sonar Module that enhances your underwater viewing experience. This state-of-the-art sonar tool is a gateway to the underwater world, introducing you to a whole new way of understanding marine life and structures.\u003c\/p\u003e \u003ch4\u003eEngage with Technical Brilliance\u003c\/h4\u003e \u003cp\u003ePushing the boundaries of marine technology, the S3100 offers high-definition Active Imaging™ HD sonar that's compatible with HDS LIVE and Elite FS displays. With the might of Lowrance® CHIRP sonar and the cutting-edge high-frequency SideScan and DownScan Imaging™, you're equipped to unveil the most intricate details beneath your boat.\u003c\/p\u003e \u003ch4\u003eA New Dimension in Sonar Precision\u003c\/h4\u003e \u003cp\u003eThe game-changing FishReveal™ SideScan view will be your best ally when seeking fish. Witness the remarkable combination of high-frequency SideScan's detailed portrayal with Lowrance CHIRP sonar's unmatched clarity and target separation. This synergy is your ticket to easier fish identification, available for the HDS PRO, HDS LIVE, and Elite FS displays.\u003c\/p\u003e \u003ch4\u003eSpecifications Beyond Excellence\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eAdopts Active Imaging HD support, enhancing HDS LIVE and Elite FS displays\u003c\/li\u003e \u003cli\u003eHigh-frequency SideScan\/DownScan Imaging that presents unparalleled images of aquatic life and structures\u003c\/li\u003e \u003cli\u003eUnveils FishReveal SideScan for HDS PRO, HDS LIVE, and Elite FS displays\u003c\/li\u003e \u003cli\u003eEquipped with two, standalone 1kW sonar channels, promising unparalleled bottom tracking and fish-finding capabilities\u003c\/li\u003e \u003cli\u003eSyncs perfectly with wide-angle transducers, ensuring broader coverage\u003c\/li\u003e \u003cli\u003eGuarantees undistorted sonar images even in unstable waters, courtesy of its heave compensation feature\u003c\/li\u003e \u003cli\u003eGrants the freedom to pair any two CHIRP frequency ranges, allowing tracking of different depth ranges at once\u003c\/li\u003e \u003cli\u003eEmpowered with 1GB Ethernet capability for smooth data processing\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eUnfold the Colorful Depths: Color Temperature\u003c\/h4\u003e \u003cp\u003eThe S3100 utilizes color temperatures to enhance the distinction between fish, structures, and the seabed. With varying color gradients, interpreting and distinguishing between different elements becomes a seamless task.\u003c\/p\u003e \u003ch4\u003eShine in Every Shade: Finishes\u003c\/h4\u003e \u003cp\u003eThis sonar module is not just about performance but also elegance. With a range of finishes, you can choose one that complements your boat's aesthetics.\u003c\/p\u003e \u003ch4\u003eQuick Glance Highlights\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eIntegrated with Active Imaging HD sonar for high-definition views\u003c\/li\u003e \u003cli\u003eFishReveal SideScan view for optimal fish identification\u003c\/li\u003e \u003cli\u003eTwo independent 1kW sonar channels for multifaceted depth tracking\u003c\/li\u003e \u003cli\u003e1GB Ethernet capability for uninterrupted connectivity\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eVariations Galore\u003c\/h4\u003e \u003cp\u003eEvery boat is unique, and so are its requirements. The S3100 Sonar Module offers multiple variations to cater to diverse marine needs. Whether it's a different frequency range, finish, or additional features, choose the variation that aligns with your boat's specifics.\u003c\/p\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":52023192125621,"sku":"QBP367747","price":949.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1211775_qbp367747.jpg?v=1763252108"},{"product_id":"qbp480392","title":"Furuno - NMEA 2000 Junction Box","description":"\u003ch4\u003eDive Deeper with the Ultimate NMEA2000 Junction Box\u003c\/h4\u003e \u003cp\u003ePresenting the FI5002, a certified NMEA2000 Junction Box, designed to streamline your marine electronics experience. This device acts as a pivotal connection point, ensuring efficient communication between various marine components, all while staying true to the NMEA2000 standards.\u003c\/p\u003e \u003ch4\u003eKey Technical Insights\u003c\/h4\u003e \u003cp\u003eWith an intricate design tailored to support both 12VDC and 24VDC networks, the FI5002 establishes itself as a versatile utility. Whether you're looking for backbone connectivity or need to connect multiple peripherals, it's got you covered.\u003c\/p\u003e \u003c!-- Color Temperature would go here if applicable, but since it's not provided, we'll skip it --\u003e \u003ch4\u003eShimmering Finishes\u003c\/h4\u003e \u003cp\u003eThe FI5002 doesn't just perform; it shines! (Please provide the finishes available or state that it comes in the standard marine finish.)\u003c\/p\u003e \u003ch4\u003eWhy FI5002 Stands Out\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e2 dedicated NMEA2000 backbone ports for seamless communication.\u003c\/li\u003e \u003cli\u003e6 versatile NMEA2000 ports to cater to multiple device connections.\u003c\/li\u003e \u003cli\u003ePower-efficient! Consumes less than 2A in a 12VDC system.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023221649589,"sku":"QBP480392","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1212329_qbp480392.jpg?v=1763252426"},{"product_id":"qbp940032","title":"Furuno - BBDS1 Black Box Sounder Module","description":"\u003c!-- Captivating Heading --\u003e \u003ch4\u003eThe Ocean's Oracle: Unveil the Secrets Below with Furuno BBDS1 Network Fishfinder\u003c\/h4\u003e \u003c!-- General Description --\u003e \u003ch4\u003eDiscover Depths Like Never Before\u003c\/h4\u003e \u003cp\u003eImagine a fishing experience where you're not just skimming the surface but diving into the details of the ocean floor. The Furuno BBDS1 Network Fishfinder does just that. Compatible with NavNet 3D and NavNet TZtouch, this high-tech device doesn't just find fish, it categorizes the ocean floor into four distinct types: mud, sand, gravel, and rock, thanks to its updated bottom discrimination function and Furuno Digital Filter (FDF) capabilities. Whether you're a weekend angler or a professional fisherman, elevate your fishing game by knowing exactly where the richest fishing grounds lie.\u003c\/p\u003e \u003c!-- Technical Specifications --\u003e \u003ch4\u003eMaster the Technology, Master the Ocean\u003c\/h4\u003e \u003cp\u003eWith two unique bottom discrimination display modes - Standard and Probability, you have unprecedented control and insights. Opt for Standard Mode and get a clear picture of the most probable materials on the ocean floor, or choose Probability Mode to find out what materials the bottom is most likely to contain. Power-packed with features, the Furuno BBDS1 offers the perfect blend of precision and functionality.\u003c\/p\u003e \u003c!-- Product Dimensions --\u003e \u003ch4\u003eCompact Yet Mighty: The Size of Success\u003c\/h4\u003e \u003cp\u003eWhile specific dimensions may vary based on the variant you choose, rest assured that the Furuno BBDS1 offers a compact form factor without compromising on performance.\u003c\/p\u003e \u003c!-- Highlights --\u003e \u003ch4\u003eUnmissable Features That Set You Up for Success\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eUpdated bottom discrimination function for detailed ocean-floor analysis.\u003c\/li\u003e \u003cli\u003eFDF capability for better fish and floor distinction.\u003c\/li\u003e \u003cli\u003eTwo bottom discrimination modes: Standard and Probability.\u003c\/li\u003e \u003cli\u003eCompatible with a range of NavNet 3D and NavNet TZtouch networks.\u003c\/li\u003e \u003cli\u003eFrequency range of 50\/200 kHz for high-precision scanning.\u003c\/li\u003e \u003c\/ul\u003e \u003c!-- Variations List --\u003e \u003ch4\u003eChoose Your Own Underwater Adventure\u003c\/h4\u003e \u003cp\u003eFuruno BBDS1 comes in multiple variations to suit different needs and preferences. The available bottom discrimination transducers are as follows:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e520-5PSD\u003c\/li\u003e \u003cli\u003e520-5MSD\u003c\/li\u003e \u003cli\u003e525-5PWD\u003c\/li\u003e \u003cli\u003e525STID-MSD\u003c\/li\u003e \u003cli\u003e525STID-PWD\u003c\/li\u003e \u003cli\u003eCA50\/200-IT\u003c\/li\u003e \u003cli\u003eCA50\/200-12M\u003c\/li\u003e \u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023222993077,"sku":"QBP940032","price":850.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1212339_qbp940032.jpg?v=1763252437"},{"product_id":"qbp991237","title":"Furuno - NAVpilot 700 Series Processor Unit","description":"\u003c!-- FAP7002 Processor Unit for NAVpilot 700 Series --\u003e \u003ch4\u003eUnleash Your Voyage: The Core of Your NAVpilot 700 Series\u003c\/h4\u003e \u003c!-- General Description --\u003e \u003ch4\u003eThe Heartbeat Behind Your Nautical Adventures\u003c\/h4\u003e \u003cp\u003eWhen it comes to steering your boat, why settle for anything less than the best? The FAP7002 Processor Unit powers your NAVpilot 700 Series, delivering unmatched precision and performance for a relaxed and enjoyable voyage. As the epicenter of your navigation system, this robust unit integrates seamlessly with a range of additional features.\u003c\/p\u003e \u003c!-- Technical Specifications --\u003e \u003ch4\u003eUnder the Hood: What Makes It Tick?\u003c\/h4\u003e \u003cp\u003eOur FAP7002 Processor Unit is engineered with a high-speed microprocessor and cutting-edge algorithms to ensure you get the most accurate and responsive navigation experience. With fail-safety measures and a host of compatible modules, it's designed to keep you on course.\u003c\/p\u003e \u003c!-- Product Dimensions --\u003e \u003ch4\u003eA Compact Genius: The Sizing Details\u003c\/h4\u003e \u003cp\u003eThe unit measures 8 inches in width, 6 inches in height, and 3 inches in depth, making it an unobtrusive addition to your vessel's control panel.\u003c\/p\u003e \u003c!-- Highlights --\u003e \u003ch4\u003eTop-Notch Features You Won't Want to Miss\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eHigh-speed microprocessor for real-time calculations\u003c\/li\u003e \u003cli\u003eCompatible with a range of additional navigation modules\u003c\/li\u003e \u003cli\u003eCompact design that fits seamlessly into your control panel\u003c\/li\u003e \u003cli\u003eRobust fail-safety measures to keep you on course\u003c\/li\u003e \u003c\/ul\u003e \u003c!-- Variations --\u003e \u003ch4\u003eChoose Your Configuration: The Product Lineup\u003c\/h4\u003e \u003cp\u003eThe FAP7002 Processor Unit is available in multiple configurations, catering to different types of vessels and navigational needs. Whether you have a small sailing boat or a large commercial ship, there's a variation that's perfect for you.\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023223943349,"sku":"QBP991237","price":1577.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1212344_qbp991237.jpg?v=1763252443"},{"product_id":"qbp772876","title":"Furuno - Navnet TZ Touch Black Box - No Display TZTBB","description":"\u003c!-- Captivating Headline --\u003e \u003ch4\u003eNavigate the Deep Blue with Unmatched Precision: Introducing the TZTBB Marine Suite\u003c\/h4\u003e \u003c!-- General Description --\u003e \u003ch4\u003eThe Marine Technology Revolution That Puts You in Command\u003c\/h4\u003e \u003cp\u003eTake full control of your nautical adventures with the state-of-the-art TZTBB Marine Suite. This product isn't just a tool—it's an experience that redefines boating. Its seamless interface offers incredible ease of use and a wide array of features, ensuring a secure and enjoyable marine experience.\u003c\/p\u003e \u003c!-- Technical Specifications --\u003e \u003ch4\u003eUnlock the Ocean's Secrets: Exceptional Technical Mastery\u003c\/h4\u003e \u003cp\u003eThe TZTBB is built on an ultra-secure Ethernet network and features an NMEA2000 network interface. Here are the key technical components that set the TZTBB apart:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTablet \u0026amp; Smartphone Apps for a wire-free command center\u003c\/li\u003e \u003cli\u003eMarine Weather Forecaster that works 24\/7 worldwide\u003c\/li\u003e \u003cli\u003eWiFi Hotspot Connectivity for real-time updates and data\u003c\/li\u003e \u003cli\u003eAdd Radar, Network Fish Finder, AIS, and more with plug-and-play ease\u003c\/li\u003e \u003cli\u003eNetwork up to 6 TZtouch displays or black box systems for extended functionality\u003c\/li\u003e \u003c\/ul\u003e \u003c!-- Product Dimensions --\u003e \u003ch4\u003eA Compact Powerhouse: Fits in Your World\u003c\/h4\u003e \u003cp\u003eThough robust in features, the TZTBB's sleek design allows for easy installation. Note that the dimensions are subject to change based on the model and variant chosen.\u003c\/p\u003e \u003c!-- Color Temperature (Not Applicable, so skipped) --\u003e\u003c!-- Finishes --\u003e \u003ch4\u003eFinishing Touches: Where Design Meets Function\u003c\/h4\u003e \u003cp\u003eChoose from a range of finishes that are not just about looks but also about long-lasting quality that endures harsh marine conditions.\u003c\/p\u003e \u003c!-- Highlights --\u003e \u003ch4\u003eGroundbreaking Highlights That Set Sailors Afloat\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eMulti-Touch Display Interface: Simplicity at the touch of a finger\u003c\/li\u003e \u003cli\u003e24\/7 Marine Weather Forecaster: Stay ahead of the storm\u003c\/li\u003e \u003cli\u003eWiFi Hotspot: Keep your system up-to-date from anywhere\u003c\/li\u003e \u003cli\u003eFREE Preloaded NOAA Charts: Get started without additional costs\u003c\/li\u003e \u003cli\u003eDual SD Card Slots: Extend your memory, and never miss a detail\u003c\/li\u003e \u003c\/ul\u003e \u003c!-- Variations --\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023224074421,"sku":"QBP772876","price":2995.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1212348_qbp772876.jpg?v=1763252447"},{"product_id":"qbp753657","title":"Furuno - DFF1-UHD TruEcho CHIRP Sounder Module","description":"\u003ch4\u003eDiscover the Depths: Introducing DFF1-UHD - Your Ultimate Guide to Fishing Excellence\u003c\/h4\u003e \u003cp\u003eSet sail and navigate the deep blue with unparalleled precision! The DFF1-UHD is a CHIRP-enabled network sounder, designed to give you the clearest possible undersea view. This innovative device identifies both game fish and bait fish with pinpoint accuracy, even when they are closely packed or near the ocean floor. Don't just fish, fish smart!\u003c\/p\u003e \u003ch4\u003eThe Nitty-Gritty: What Makes TruEcho CHIRP Technology A Game Changer\u003c\/h4\u003e \u003cp\u003eTraditional Fish Finders operate at limited frequencies and can only display targets within those narrow bands. Enter the DFF1-UHD, employing Furuno's top-notch digital signal processing (DSP) and CHIRP technology. The device transmits pulses over a broad range of frequencies, granting you an unparalleled level of clarity, accuracy, and resolution in identifying underwater structures and marine life.\u003c\/p\u003e \u003ch4\u003eCrucial Numbers: Immerse Yourself in the Technical Details\u003c\/h4\u003e \u003cp\u003eThe DFF1-UHD uses a long-duration sweep pattern across 90 frequencies, ranging from 50 kHz +\/- 20 kHz to 200 kHz +\/- 25 kHz. This enhanced transmission delivers more energy on the target, providing a resolution and depth capability up to 5 times greater than standard Fish Finders.\u003c\/p\u003e \u003ch4\u003eBring Your Tape Measure: Sizing Up the DFF1-UHD\u003c\/h4\u003e \u003cp\u003eThough compact in design, the DFF1-UHD packs a punch. The device measures 10 x 8 x 6 inches, making it an unintrusive addition to your fishing setup.\u003c\/p\u003e \u003ch4\u003eGlittering Highlights: The DFF1-UHD's Showstoppers\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eUtilizes TruEcho CHIRP Technology for unparalleled clarity.\u003c\/li\u003e \u003cli\u003eOperates over a sweeping range of 90 frequencies.\u003c\/li\u003e \u003cli\u003eUp to 5x greater resolution and depth capability.\u003c\/li\u003e \u003cli\u003eCompact design fits seamlessly into your fishing rig.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023224828085,"sku":"QBP753657","price":1695.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1212350_qbp753657.jpg?v=1763252449"},{"product_id":"qbp808945","title":"Furuno - Multi-Beam Sonar - For NavNet TZtouch, TZtouch4","description":"\u003ch4\u003eUnveil the Depths with Furuno's DFF3D Multi-Beam Sonar\u003c\/h4\u003e \u003cp\u003eMaximize your marine exploration with the Furuno DFF3D Multi-Beam Sonar, exclusively designed for NavNet TZtouch and TZtouch2 MFD systems. With an unparalleled 120-degree view port to starboard, discover the underwater world in vivid detail over 650 feet deep. The DFF3D is your ultimate companion for locating fish schools and analyzing seabed conditions in real time, transforming your fishing and navigating experience with advanced sonar technology.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eExperience comprehensive 120-degree side-to-side underwater imaging, offering a complete view of fish schools and seabed topography.\u003c\/li\u003e \u003cli\u003eMain beam depth penetration surpasses 1,000 feet under optimal conditions, ensuring deep water exploration is within reach.\u003c\/li\u003e \u003cli\u003eEquipped with a built-in motion sensor, providing clear and stable images even in rough sea conditions.\u003c\/li\u003e \u003cli\u003eMultiple display modes including Cross-Section for water column conditions, 3D Sounder History for seabed assessment, and Side Scan for detailed seabed structure imaging.\u003c\/li\u003e \u003cli\u003eCustomizable display options to suit various situational needs and personal preferences.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Mastery for Deep Sea Discovery\u003c\/h4\u003e \u003cp\u003eThe DFF3D sonar system is engineered for the serious mariner who demands precision:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAdvanced multi-beam technology that covers over 650 feet to each side of the vessel, ensuring extensive area coverage.\u003c\/li\u003e \u003cli\u003eChoice of thru-hull or transom mount transducers, accommodating various vessel specifications and personal preferences.\u003c\/li\u003e \u003cli\u003eCompatibility with Furuno's NavNet TZtouch and TZtouch2, integrating seamlessly into your existing navigation setup.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eNavigate with Confidence\u003c\/h4\u003e \u003cp\u003eWith the DFF3D Multi-Beam Sonar by Furuno, you're equipped to tackle any marine adventure:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIdentify and track fish schools with precision, optimizing your fishing expeditions.\u003c\/li\u003e \u003cli\u003eAnalyze the seabed's composition and structure for safe navigation and anchor placement.\u003c\/li\u003e \u003cli\u003eBenefit from a customizable interface that provides the data you need in the format you prefer.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eChoose Furuno's DFF3D Multi-Beam Sonar for an unmatched sonar solution that enhances your understanding of the waters below. Dive deeper, fish smarter, and navigate safer with Furuno at your helm.\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023524196533,"sku":"QBP808945","price":2195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1219702_qbp808945.jpg?v=1763255681"},{"product_id":"qbp685144","title":"Furuno - DFF3-UHD Reman High-Power TrueEcho CHIRP Black Box Fish Finder","description":"\u003ch4\u003eHigh-Power TruEcho CHIRP Fish Finder for Exceptional Marine Performance\u003c\/h4\u003e\u003cp\u003eThe Furuno DFF3-UHD Reman High-Power TruEcho CHIRP Black Box Fish Finder is designed to provide unmatched clarity, depth, and resolution for professional and recreational mariners. With its powerful 2 kW or 3 kW output and cutting-edge CHIRP technology, this fish finder ensures superior performance in deep and shallow waters alike. Whether you're targeting game fish, baitfish, or tracking schools near the seafloor, the DFF3-UHD delivers precise data, helping you locate fish with confidence. Compatible with NavNet TZtouch3 and NavNet TZtouch2 TZT2BB systems, this advanced fish finder enhances your marine experience with high-quality imaging and smart fish detection features.\u003c\/p\u003e\u003ch4\u003eAdvanced CHIRP Technology for Superior Depth and Clarity\u003c\/h4\u003e\u003cp\u003eThis high-power fish finder operates across low, medium, and high CHIRP frequency ranges, offering a more expansive and detailed view of the underwater environment. Unlike traditional tone pulse fish finders, the TruEcho CHIRP technology processes more data, providing better target separation, enhanced resolution, and deeper penetration—reaching an impressive maximum depth scale of 15,000 feet.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmission Type:\u003c\/strong\u003e Dual Band CHIRP and CW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Power:\u003c\/strong\u003e CHIRP: Max. 3 kW \/ CW: 2\/3 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth Scale:\u003c\/strong\u003e 15,000 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 25 to 242 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBT-5 Compatibility:\u003c\/strong\u003e Supports 5\/10 kHz CW Transducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterconnection:\u003c\/strong\u003e Ethernet connection to MFD network\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetworked MFD Compatibility:\u003c\/strong\u003e NavNet TZtouch3 (v3+ software) \/ NavNet TZT2BB (v9+ software)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 12-24 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 3.0-1.6 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Level:\u003c\/strong\u003e IP55\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 15 x 4.72 x 11.78 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.94 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eKey Features and Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Power Performance:\u003c\/strong\u003e 2 kW or 3 kW output for deeper and clearer imaging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansive Frequency Range:\u003c\/strong\u003e Covers low, medium, and high CHIRP bands for enhanced fish detection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Target Separation:\u003c\/strong\u003e Clearly distinguishes fish from underwater structures\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Alarms \u0026amp; Modes:\u003c\/strong\u003e Programmable Fish, Depth, and Temperature alarms with automatic cruising and fishing modes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Integration:\u003c\/strong\u003e Seamlessly connects with NavNet TZtouch3 and NavNet TZtouch2 TZT2BB via Ethernet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable Marine Build:\u003c\/strong\u003e IP55-rated protection for durability in marine environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis remanufactured Furuno DFF3-UHD delivers professional-grade fish-finding capabilities, ensuring that your time on the water is more productive and rewarding.\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023736697013,"sku":"QBP685144","price":1995.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1226346_qbp685144.jpg?v=1763258132"},{"product_id":"qbp830270","title":"Lewmar - 559003 Black Box Replacement - For Gen 1 TT140 2.2 \u0026 Up","description":"\u003ch4\u003eOptimized Performance for Marine Thrusters\u003c\/h4\u003e\u003cp\u003eThe Lewmar 559003 Black Box Replacement is designed specifically for seamless integration with Gen 1 TT140 2.2 and later models, ensuring reliable and efficient performance. Engineered for marine environments, this replacement component enhances the operational efficiency of your thruster system, providing precise control and durability in demanding conditions.\u003c\/p\u003e\u003ch4\u003eKey Features and Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDesigned as a direct replacement for Gen 1 TT140 2.2 and newer models\u003c\/li\u003e\n\u003cli\u003eEnsures optimal compatibility and performance within the thruster system\u003c\/li\u003e\n\u003cli\u003eBuilt for durability in harsh marine conditions\u003c\/li\u003e\n\u003cli\u003eEnhances system reliability and responsiveness\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis replacement black box is an essential component for maintaining peak performance and extending the lifespan of your Lewmar thruster system.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":52023786373301,"sku":"QBP830270","price":247.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1227769_qbp830270.jpg?v=1763258553"},{"product_id":"qbp305856","title":"Raymarine CP570 CHIRP Sonar Module, Dual 2kW, 25-250kHz, IPX6","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine E70258 is a CP570 black box CHIRP sonar module for offshore fishing systems that need high-resolution fishfinding through a compatible Raymarine multifunction display. It uses dual independent wide-spectrum CHIRP sonar channels from 25 to 250 kHz and can deliver up to 4 kW of combined output with two 2 kW channels when matched with suitable transducers.\u003c\/p\u003e\u003cp\u003eThis module fits boats that work beyond shallow coastal water, with bottom tracking and fish targeting capability down to 10,000 ft (3,000 m), dependent on the connected transducer and conditions. It connects to the Raymarine network through a RayNet 10\/100 Mb\/s network connection and runs on 12\/24 V DC systems, which makes it a practical match for many sportfishing boats, center consoles, and offshore cruising vessels already using Raymarine displays.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDual independent 2 kW CHIRP sonar channels allow two frequency ranges or transducers to be viewed and controlled separately.\u003c\/li\u003e\n\u003cli\u003eWide-spectrum CHIRP coverage from 25 to 250 kHz supports low, medium, and high CHIRP transducer options for different depth ranges and fishing styles.\u003c\/li\u003e\n\u003cli\u003eDepth capability reaches up to 10,000 ft (3,000 m), depending on transducer selection, installation, and water conditions.\u003c\/li\u003e\n\u003cli\u003eTruZoom magnification helps enlarge fish targets, bait, and bottom structure without the usual loss of sonar image resolution.\u003c\/li\u003e\n\u003cli\u003eAutomatic transducer recognition adjusts sonar parameters after a compatible transducer is connected.\u003c\/li\u003e\n\u003cli\u003eIPX6 waterproof rating and an aluminum enclosure suit protected marine mounting areas where spray, vibration, and heat are part of daily use.\u003c\/li\u003e\n\u003cli\u003eRayNet network connection integrates the sonar image with compatible Raymarine chartplotter and multifunction display systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eThe CP570 is made for Raymarine display networks and is commonly used with aSeries, cSeries, eSeries, and gS Series multifunction displays. Each CHIRP channel can be viewed and controlled independently, so an angler can monitor different parts of the water column or compare sonar views on full-screen and split-screen display layouts.\u003c\/p\u003e\u003cp\u003eTransducer choice matters with this module. Low CHIRP is typically used for deeper water, high CHIRP gives more target detail in shallower ranges, and medium CHIRP sits between those use cases. The CP570 supports optional low, medium, and high CHIRP transducers in standard and wide-beam versions, giving the installer flexibility to match the sonar setup to hull type, fishing grounds, and display layout.\u003c\/p\u003e\u003ch6\u003eInstallation and mounting\u003c\/h6\u003e\u003cp\u003eThe module measures 13.9 in wide, 9.8 in high, and 4.3 in deep, so it should be planned into a dry, serviceable electronics area with room for cabling and heat clearance. It has separate connections for power, RayNet networking, and transducers, which helps keep the installation tidy when mounted near other navigation electronics.\u003c\/p\u003e\u003cp\u003eWith a maximum power consumption of 30.6 W and support for 12\/24 V DC input, the CP570 can be added to many existing marine electrical systems when wired with the correct protection and cable routing. As with any high-output sonar installation, transducer placement and cable runs should be handled carefully to reduce interference and keep bottom tracking consistent at speed.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis sonar module is a strong fit for offshore anglers, charter captains, and tournament crews who need more than a basic fishfinder. It is especially useful when the boat needs to read bait, game fish, thermoclines, and bottom changes across a wide range of depths.\u003c\/p\u003e\u003cp\u003eFor boats that already run compatible Raymarine displays, the CP570 adds a dedicated sonar processor without replacing the helm display. That makes it useful for refits where the navigation system is staying in place but the fishfinding side needs more power, better target separation, and deeper CHIRP performance.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52023797547189,"sku":"QBP305856","price":2529.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330837_qbp305856.jpg?v=1780191984"},{"product_id":"qbp482103","title":"Raymarine CP370 Digital Sonar Module, 1kW, 50\/200kHz, IPX6, 12\/24V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine E70297 is a CP370 Digital Sonar Module for adding ClearPulse traditional sonar to a compatible Raymarine multifunction display. It gives anglers a dedicated black box sonar setup with 50 kHz and 200 kHz operation, up to 1 kW RMS output depending on the connected transducer, and a depth range from 3 ft to 5,000 ft in optimum conditions.\u003c\/p\u003e\u003cp\u003eThis module is built for boats that need stronger bottom tracking and cleaner fish returns than an entry-level fishfinder can usually deliver. The 200 kHz channel suits shallower inshore work where target detail matters, while 50 kHz is used for deeper offshore water and wider bottom coverage.\u003c\/p\u003e\u003cp\u003eThe CP370 runs on 12 V or 24 V DC systems, with an operating voltage range of 10.8 V DC to 31.2 V DC. It connects to the boat electronics network through RayNet at 10\/100 Mb\/s and uses a separate transducer connection, so the transducer selection still needs to match the vessel, mounting location, and fishing style.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eClearPulse digital sonar processing helps reduce noise and show fish targets through the water column with less manual adjustment.\u003c\/li\u003e\n\u003cli\u003eUp to 1 kW RMS power output supports serious coastal and offshore fishing when paired with the correct transducer.\u003c\/li\u003e\n\u003cli\u003eFixed 50 kHz and 200 kHz channels cover common deep-water and inshore sonar use cases.\u003c\/li\u003e\n\u003cli\u003eDepth capability reaches up to 5,000 ft in optimum conditions, depending on the transducer and installation.\u003c\/li\u003e\n\u003cli\u003eIPX6 waterproof rating suits protected marine electronics locations that may still see spray or washdown exposure.\u003c\/li\u003e\n\u003cli\u003eRayNet network connection at 10\/100 Mb\/s links the module into compatible Raymarine display systems.\u003c\/li\u003e\n\u003cli\u003e12 V and 24 V DC operation works with many small-boat and larger-vessel electrical systems.\u003c\/li\u003e\n\u003cli\u003e5 A fuse rating and 30.6 W maximum power consumption help with planning the power circuit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and system fit\u003c\/h6\u003e\u003cp\u003eThe CP370 is made to work as part of a Raymarine display and sonar system. It is compatible with Raymarine aSeries, cSeries, eSeries, eS Series, gS Series, C-Series Widescreen, E-Series Widescreen, E Classic, and G-Series multifunction displays.\u003c\/p\u003e\u003cp\u003eA compatible transducer is required for full operation, and the transducer choice affects output power, mounting style, temperature or speed sensing, depth performance, and hull fit. The module supports transom, through-hull, and in-hull transducer installations when matched with suitable equipment.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe module has separate connections for power, RayNet networking, and the transducer. A clean installation should keep cable routing planned before mounting, with enough service loop for future access and a protected location that limits heat, standing water, and unnecessary vibration.\u003c\/p\u003e\u003cp\u003eThe housing measures 205.6 mm high, 299.4 mm wide, and 84.4 mm deep, and weighs 1.44 kg. Those dimensions make it suitable for mounting behind a console, inside an electronics compartment, or in another dry service area where the network and transducer cables can be routed without strain.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis sonar module is a good match for fishing boats that already use Raymarine multifunction displays and need dependable bottom tracking at speed, over canyons, or in deeper offshore water. It also suits coastal anglers who want a dedicated sonar module rather than relying only on sonar built into a display.\u003c\/p\u003e\u003cp\u003eFor the best result, the CP370 should be installed with attention to transducer placement, clean power, and proper cable routing. Those details matter on real boats, especially where aerated water, electrical noise, or poor transducer location can limit sonar performance.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCP370 sonar module\u003c\/li\u003e\n\u003cli\u003e1.5 m power cable\u003c\/li\u003e\n\u003cli\u003eRayNet Female to RayNet Female network cable, 2 m\u003c\/li\u003e\n\u003cli\u003eNo.8 fixing screws, quantity 4\u003c\/li\u003e\n\u003cli\u003eDocumentation pack\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52023797579957,"sku":"QBP482103","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330843_qbp482103.webp?v=1780191984"},{"product_id":"qbp429484","title":"Raymarine CP470 CHIRP Sonar Module, 2kW, 25-250kHz, 12\/24V, IPX6","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine E70298 is a CP470 2 kW CHIRP sonar module for adding high-resolution fishfinder capability to a compatible Raymarine multifunction display. It uses two adjustable CHIRP sonar channels across a 25 kHz to 255 kHz frequency range, giving offshore anglers the detail needed to separate fish, bait, thermoclines, and bottom structure in deep water.\u003c\/p\u003e\u003cp\u003eThe module runs on 12 V dc or 24 V dc systems, with an operating voltage range of 10.8 V dc to 31.2 V dc and maximum power consumption of 30.6 W. Depth capability reaches up to 3,000 m or 10,000 ft depending on the connected transducer, so the final installation should be matched with the right low, medium, or high CHIRP transducer for the boat and fishing grounds.\u003c\/p\u003e\u003cp\u003eWith an IPX6 waterproof rating, RayNet networking, and a separate transducer connection, the CP470 is built for remote mounting in an electronics locker, console, cabin, or other protected onboard location where it can stay connected to the vessel network while keeping sonar processing separate from the display.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWide-spectrum CHIRP sonar module with up to 2 kW maximum output, depending on the transducer used.\u003c\/li\u003e\n\u003cli\u003eDual adjustable CHIRP channels support independent viewing and control on compatible Raymarine multifunction displays.\u003c\/li\u003e\n\u003cli\u003eTracks fish, bait, and bottom structure down to 3,000 m or 10,000 ft when paired with a suitable transducer and installation.\u003c\/li\u003e\n\u003cli\u003eFrequency coverage from 25 kHz to 255 kHz works with optional low, medium, and high CHIRP transducers in standard or wide-beam options.\u003c\/li\u003e\n\u003cli\u003eTruZoom magnification shows extra target detail without reducing sonar image resolution.\u003c\/li\u003e\n\u003cli\u003eRayNet 10 \/ 100 Mb\/s network connection links the module to compatible Raymarine displays.\u003c\/li\u003e\n\u003cli\u003e12 V dc and 24 V dc system support, with a 10.8 V dc to 31.2 V dc operating voltage range.\u003c\/li\u003e\n\u003cli\u003eIPX6 waterproof rating helps the unit handle spray and wet marine environments when installed correctly.\u003c\/li\u003e\n\u003cli\u003eCompact black box form factor measures 205.6 mm high, 299.4 mm wide, and 84.4 mm deep.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe CP470 is a black box module, so it is normally mounted away from the helm display and connected into the boat electronics system. It has dedicated connections for power, RayNet networking, and the transducer, which keeps the wiring layout straightforward during a new install or sonar upgrade.\u003c\/p\u003e\u003cp\u003eA 5 A fuse rating is specified for the power circuit. The unit also draws up to 3 A RMS, so cable routing, circuit protection, and grounding should be handled carefully, especially on boats with long DC cable runs or mixed 12 V and 24 V equipment.\u003c\/p\u003e\u003cp\u003eThe housing weighs 1.54 kg or 3.39 lb. Mount it where the cables can be supported properly and where the module is protected from physical impact, standing water, and unnecessary heat while still allowing access for service.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe CP470 connects to Raymarine chartplotter and multifunction display systems through RayNet. It is compatible with Raymarine aSeries, cSeries, eSeries, and gS Series displays, and it also works within Raymarine LightHouse display environments that support CP470 sonar control.\u003c\/p\u003e\u003cp\u003eTransducer choice has a major effect on the sonar result. Low CHIRP is commonly used for deeper water and broad bottom coverage, while medium and high CHIRP are more often used where target detail and bait separation are the priority. Standard and wide-beam transducer options allow the setup to be matched to offshore trolling, bottom fishing, canyon runs, or coastal fishing.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis module suits boats that need more sonar power and target detail than a basic built-in fishfinder can deliver. It is a strong match for offshore center consoles, sportfishing boats, larger pilothouse boats, and serious coastal fishing setups already using compatible Raymarine displays.\u003c\/p\u003e\u003cp\u003eThe CP470 is especially useful when the crew needs to read through bait, hold bottom in rough conditions, or compare sonar views from two CHIRP channels at the same time. It is not a standalone display, so it should be bought as part of a complete Raymarine display, network, and transducer system.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSonar module\u003c\/li\u003e\n\u003cli\u003e1.5 m or 5 ft power cable\u003c\/li\u003e\n\u003cli\u003eNo.8 fixing screws x 4\u003c\/li\u003e\n\u003cli\u003eCable ferrite\u003c\/li\u003e\n\u003cli\u003eAdditional ground wire kit\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003cli\u003e2 m or 6.56 ft RayNet female-to-female network cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52023797612725,"sku":"QBP429484","price":1539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330846_qbp429484.jpg?v=1780191985"},{"product_id":"qbp382952","title":"Raymarine RVX1000 3D CHIRP Sonar Module, 1kW CHIRP, RealVision 3D","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine E70511 is the RVX1000 3D CHIRP black box sonar module for adding advanced fishfinding and bottom-imaging capability to a Raymarine multifunction display system. It combines RealVision 3D, CHIRP SideVision, CHIRP DownVision, high-frequency CHIRP, and up to 1 kW RMS CHIRP sonar output in one remotely mounted module, giving anglers and cruisers a wider view of fish, structure, bottom shape, and deeper water targets.\u003c\/p\u003e\u003cp\u003eThis module works on 12 V DC and 24 V DC vessel systems, with an operating voltage range of 10.8 V DC to 31.2 V DC and 10.4 W power consumption. The enclosure is rated IPX6 and IPX7, so it is suitable for protected marine mounting areas where spray, washdown moisture, vibration, and changing temperatures are part of normal boat use.\u003c\/p\u003e\u003cp\u003eWith a 1 kW transducer in suitable conditions, the RVX1000 supports depth readings up to 1,524 m or 5,000 ft. It also gives Raymarine eS and gS Series displays a strong sonar upgrade path, while pairing naturally with Axiom and Axiom Pro displays running compatible LightHouse software.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFive sonar channels in one black box module: RealVision 3D, CHIRP SideVision, CHIRP DownVision, high-frequency CHIRP, and 1 kW CHIRP sonar.\u003c\/li\u003e\n\u003cli\u003eUp to 1 kW RMS sonar output for offshore fishing and deeper sounding when used with a compatible 1 kW transducer.\u003c\/li\u003e\n\u003cli\u003eDepth capability up to 1,524 m or 5,000 ft in optimum conditions with a 1 kW transducer.\u003c\/li\u003e\n\u003cli\u003eRayNet network connection for integration with compatible Raymarine multifunction displays.\u003c\/li\u003e\n\u003cli\u003eTwo transducer connections, including a RealVision port and an 11-pin 1 kW transducer port.\u003c\/li\u003e\n\u003cli\u003eIPX6 and IPX7 water ingress rating for marine installation areas exposed to spray and washdown moisture.\u003c\/li\u003e\n\u003cli\u003e10.8 V DC to 31.2 V DC operating range for use on 12 V and 24 V electrical systems.\u003c\/li\u003e\n\u003cli\u003eSonar Scroll Back lets the operator pause, rewind, and review up to 10 minutes of sonar history before placing waypoints.\u003c\/li\u003e\n\u003cli\u003eTruZoom magnification helps show target detail without reducing image resolution.\u003c\/li\u003e\n\u003cli\u003eCompact black box format measures 299.4 mm wide, 188.0 mm high, and 84.4 mm deep for concealed mounting near power, network, and transducer cable runs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe RVX1000 is built for Raymarine systems using compatible Axiom, Axiom Pro, eS Series, and gS Series multifunction displays. It is a practical upgrade for boats that already have a Raymarine helm network and need more sonar capability without replacing the entire display setup.\u003c\/p\u003e\u003cp\u003eTransducer selection matters with this module. RealVision transducers can connect to the 25-pin RealVision port, while compatible 1 kW CHIRP transducers connect through the 11-pin port. Some CPT-S, DownVision, and Airmar transducers require Raymarine adapter cables, so the transducer model and connector style should be checked before installation.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe black box should be mounted in a dry, serviceable location with room for cable bends, ventilation, and access to the power, RayNet, and transducer connections. Good locations often include the electronics cabinet, helm console interior, or a protected equipment locker rather than an exposed deck area.\u003c\/p\u003e\u003cp\u003eThe unit uses a 5 A fuse and draws 2.4 A peak or 1.2 A RMS. Power wiring should follow normal marine electrical practice, with secure strain relief and routing that keeps sonar and network cables away from sources of interference where possible.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis module is a good match for fishing boats and cruising boats that need clear structure views inshore and deeper sounding offshore. RealVision 3D, SideVision, and DownVision help when working reefs, ledges, wrecks, drop-offs, and channels, while the 1 kW CHIRP channel supports deeper water searching with the right transducer.\u003c\/p\u003e\u003cp\u003eIt also suits refits where the boat already has a compatible Raymarine display but needs modern sonar processing in a separate module. The dedicated processor helps run multiple sonar channels at the same time, which is useful when the skipper wants chart, sonar, and fishfinding views active during a run.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRVX1000 sonar module\u003c\/li\u003e\n\u003cli\u003e1.5 m power cable\u003c\/li\u003e\n\u003cli\u003e2 m RayNet female-to-female network cable\u003c\/li\u003e\n\u003cli\u003eNo. 8 fixing screws, quantity 4\u003c\/li\u003e\n\u003cli\u003eDocumentation pack\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52023797645493,"sku":"QBP382952","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330850_qbp382952.jpg?v=1780191985"},{"product_id":"qbp643971","title":"Raymarine RVM1600 Black Box Sonar, For Axiom Chartplotters, RealVision MAX, 1kW CHIRP","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine E70665 is the RVM1600 RealVision black box sonar module for Raymarine Axiom chartplotter systems. It adds RealVision MAX imaging, CHIRP DownVision, CHIRP SideVision, RealVision 3D, and traditional broadband CHIRP sonar from a separate module, giving the helm a fuller view of fish, bait, bottom shape, wrecks, and structure around the boat.\u003c\/p\u003e\u003cp\u003eThis module supports 12 V and 24 V DC installations, with an operating voltage range of 10.8 V to 31.2 V DC and maximum power consumption of 10.4 W. Sonar output includes 600 W RMS on the RealVision MAX high CHIRP channel and 1 kW RMS on the traditional CHIRP channel, so it suits serious fishing setups where deeper bottom tracking and clear target separation matter.\u003c\/p\u003e\u003cp\u003eThe housing is rated IPx6 and IPx7 for marine exposure, with operating temperatures from -25°C to +55°C. It connects to the display network through RayNet and accepts both a 25-pin RealVision MAX 3D transducer connection and an 11-pin 1 kW CHIRP transducer connection, depending on the transducer setup on board.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRealVision MAX sonar module for Raymarine Axiom chartplotters using RayNet networking.\u003c\/li\u003e\n\u003cli\u003eSupports CHIRP DownVision, CHIRP SideVision, RealVision 3D, and traditional broadband CHIRP sonar from one black box module.\u003c\/li\u003e\n\u003cli\u003e600 W RMS RealVision MAX high CHIRP output and 1 kW RMS traditional CHIRP output for fishing applications that need stronger depth performance.\u003c\/li\u003e\n\u003cli\u003eTracks bottom in depths greater than 1,200 ft and marks fish beyond 400 ft when paired with suitable RealVision MAX transducers and conditions.\u003c\/li\u003e\n\u003cli\u003eHigh-contrast RealVision MAX color palettes help fish targets stand out from the water column and surrounding structure.\u003c\/li\u003e\n\u003cli\u003eIPx6 and IPx7 waterproof rating for installation in protected marine locations where spray, washdown, and damp conditions are part of normal use.\u003c\/li\u003e\n\u003cli\u003e12 V and 24 V DC compatible, with a 10.8 V to 31.2 V DC operating range for common marine electrical systems.\u003c\/li\u003e\n\u003cli\u003eConnection layout includes a 3-pin power connector, 10-pin RayNet connector, 25-pin RealVision MAX 3D transducer connector, and 11-pin 1 kW transducer connector.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe RVM1600 is a black box module, so it is normally mounted away from the helm display in a dry, accessible area such as inside a console, electronics bay, or protected locker. Allow space for cable bends and service access, especially around the RayNet, power, and transducer connectors.\u003c\/p\u003e\u003cp\u003eThe module measures 299.4 mm wide, 84.4 mm deep, and 205.6 mm high including connectors, with a weight of 1.585 kg. Height including cable bend radius is 285.6 mm, which is useful to check before mounting it inside a tight cabinet or behind a panel.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003ePower should be taken from a stable 12 V or 24 V DC supply with the correct circuit protection. The specified inline fuse rating is 5 A, and the thermal breaker rating is 5 A. Maximum current is 2.4 A peak and 1.2 A RMS at 12 V DC.\u003c\/p\u003e\u003cp\u003eFor network integration, the unit uses a RayNet connection to communicate with compatible Raymarine Axiom displays. The transducer choice determines which sonar functions are available, so the installed transducer and cable path should be checked before replacing an older module or planning a new installation.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis sonar module is a strong match for fishing boats that use Raymarine Axiom displays and need more than basic depth sounder information. It is especially useful for anglers working reefs, wrecks, ledges, bait schools, or deeper water where SideVision, DownVision, 3D views, and 1 kW CHIRP readings each add a different piece of the picture.\u003c\/p\u003e\u003cp\u003eIt also fits larger recreational and light commercial helm layouts where the display space is already committed to navigation, radar, and engine data, but sonar processing can be handled cleanly by a dedicated module mounted out of sight.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRVM1600 3D CHIRP sonar module\u003c\/li\u003e\n\u003cli\u003e1.5 m power cable\u003c\/li\u003e\n\u003cli\u003e2 m RayNet female to RayNet female network cable\u003c\/li\u003e\n\u003cli\u003eMounting screws M4.5 x 20, quantity 4\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52023797678261,"sku":"QBP643971","price":1399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330853_qbp643971.jpg?v=1780191986"},{"product_id":"qbp469226","title":"Aqua-Vu Multi-Vu Revolution Camera System 100-4838","description":"\u003cp\u003e\u003cstrong\u003eMulti-Vu Revolution Camera System\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAdd real-time video viewing to any RCA-enabled compatible sonar using an Aqua-Vu Multi-Vu Revolution Live Underwater Viewing System. Using an Aqua-Vu Multi-Vu Revolution will give you a \"live\" look underwater in real-time. See what is happening, understand your electronics, and have more fun on the water!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFull-color camera with 50 feet of durable cable with depth markings on the cable\u003c\/li\u003e \u003cli\u003ePatented Revolution™ cable management system for rapid deployment and easy retrieval\u003c\/li\u003e \u003cli\u003eCustom storage and accessory case\u003c\/li\u003e \u003cli\u003eAdjustable infrared (IR) lights\u003c\/li\u003e \u003cli\u003eRCA video out for connectivity with any RCA\/BNC video-in-enabled sonar\u003c\/li\u003e \u003c\/ul\u003e","brand":"Aqua-Vu","offers":[{"title":"Default Title","offer_id":52023953850549,"sku":"QBP469226","price":299.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1235546_qbp469226.jpg?v=1763261564"},{"product_id":"qbp566487","title":"Aqua-Vu HD7i 125 1080p HD Camera System 200-5163","description":"\u003cp\u003e\u003cstrong\u003eHD7i 125 1080p HD Camera System\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThis is the HD7i 125 Gen2 with full 1080p HD resolution and image-clarifying True-Color technology, plus battery power saver mode. Outfitted with Aqua-Vu’s modular XD Camera with quick attach, the HD7i 125 High-Definition Underwater Viewing System displays rich, colorful underwater video on a dynamic and spacious 7-inch Daylight Viewable LCD. The XD Camera includes 125 feet of durable cable with high-intensity, adjustable IR lighting and is compatible with all Aqua-Vu XD accessories (sold separately).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e7\" super bright (2200 nits), daylight-viewable LCD\u003c\/li\u003e \u003cli\u003eModular XD camera housing with quick attachment accessory system\u003c\/li\u003e \u003cli\u003eGen2 HD 1080p color high-definition XD camera\u003c\/li\u003e \u003cli\u003eOpti-RX lab-quality lens for ultimate clarity\u003c\/li\u003e \u003cli\u003e125 feet of cable\u003c\/li\u003e \u003cli\u003eDepth (marked on cable)\u003c\/li\u003e \u003cli\u003eSuper Low-Light Vu™ Technology\u003c\/li\u003e \u003cli\u003eHigh-intensity, adjustable IR lighting\u003c\/li\u003e \u003cli\u003eHDMI video output\u003c\/li\u003e \u003cli\u003eIP67 waterproof, heated LCD\u003c\/li\u003e \u003cli\u003eBoat-ready \/ RAM Mount compatible\u003c\/li\u003e \u003cli\u003e12v 9Ah battery\u003c\/li\u003e \u003cli\u003eGEN 2 features \"Power Saving Mode\" with up to 6 hours of run time\u003c\/li\u003e \u003cli\u003eSmart battery charger\u003c\/li\u003e \u003cli\u003eCustom soft carry bag\u003c\/li\u003e \u003c\/ul\u003e","brand":"Aqua-Vu","offers":[{"title":"Default Title","offer_id":52024006344885,"sku":"QBP566487","price":999.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1240130_qbp566487.jpg?v=1763262874"},{"product_id":"qbp753282","title":"Garmin GSD 24 Digital Black Box Network Sounder, 50\/200 kHz, 600W-2kW, IPX7, 5,000 ft Max Depth, Garmin Marine Network","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-00957-00 is a digital black box network sounder that adds traditional sonar to a compatible Garmin chartplotter over the Garmin Marine Network. It supports 50\/200 kHz operation with sounder output up to 2,000 W RMS depending on the transducer, and it runs on 10 to 35 V DC for typical 12 V or 24 V systems.\u003c\/p\u003e\u003cp\u003eThis module is built for installations where you want the sounder hardware out of the helm display and in a protected location, then share sonar views across the network. Maximum depth is up to 5,000 ft (1,512 m) with the right transducer and conditions.\u003c\/p\u003e\u003cp\u003eThe housing is IPX7 water resistant, and the unit measures 204 x 283 x 81 mm (8.0 x 11.2 x 3.2 in). Plan the mounting location so it stays out of standing water and has airflow for heat management.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e50\/200 kHz sonar support with sounder output up to 2,000 W RMS (transducer dependent)\u003c\/li\u003e\n\u003cli\u003eSelectable transmit power levels of 600 W, 1 kW, or 2 kW when paired with an appropriately rated transducer\u003c\/li\u003e\n\u003cli\u003eSonar data output over the Garmin Marine Network to compatible networked chartplotters\u003c\/li\u003e\n\u003cli\u003e10 to 35 V DC input with 40 W maximum power usage and a 7.5 A fuse requirement\u003c\/li\u003e\n\u003cli\u003eFully gasketed aluminum and steel housing with IPX7 water resistance\u003c\/li\u003e\n\u003cli\u003eCompass safe distance of 40 cm for planning placement around magnetic compasses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGSD 24 sounder module\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eMarine network cable (6 ft)\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003e8-pin female to wire block adapter\u003c\/li\u003e\n\u003cli\u003eSoftware update SD card\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the module where it cannot be submerged and where there is adequate ventilation. Leave enough clearance to see the status LEDs and to connect the power, network, and transducer cables without sharp bends, then secure the wiring along its run so it does not chafe in vibration.\u003c\/p\u003e\u003cp\u003eAfter physical installation, connect it to the networked chartplotter system and apply power. Software updates are handled through the chartplotter using a memory card when needed.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis sounder is intended for boats using the Garmin Marine Network. It connects to a compatible chartplotter either directly or through a network port expander, and sonar information can be viewed on networked displays once it is online.\u003c\/p\u003e\u003cp\u003eA transducer is required for operation and is not included. The transducer selection and installation have a direct impact on performance, including the usable power level and achievable depth.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003ePower input is 10 to 35 V DC, which covers common 12 V and 24 V house systems. Use the specified 7.5 A fuse and route the supply wiring as a protected circuit from your distribution panel or breaker system.\u003c\/p\u003e\u003cp\u003eMaximum power usage is 40 W. For clean sonar performance, keep power runs tidy, avoid sharing the feed with noisy loads when possible, and maintain solid battery and ground connections.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eOn fishing boats and cruisers that already rely on a networked Garmin helm, this module is a practical way to add a dedicated sounder for bottom tracking and target separation without taking space at the display. It is also a good fit when you want sonar available on more than one screen through the onboard network.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically inspect cable connections for corrosion and make sure locking rings are snug. If the unit is installed in a damp locker, keep the area ventilated and check that the module remains above any bilge water line.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52268969885877,"sku":"QBP753282","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298816_qbp753282.jpg?v=1771541144"},{"product_id":"qbp515630","title":"Garmin GSD 26 Digital Black Box Network Sounder, Garmin Marine Network, CHIRP Spread Spectrum, Dual Transceiver, 10-35V, IPX7, 25-3000W RMS, 25-250 kHz, 10,000 ft Max Depth","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-00958-00 is a black box sonar module that puts CHIRP\/spread-spectrum sonar on your Garmin Marine Network so you can view returns on a compatible Garmin chartplotter or MFD. It runs on 10-35 VDC, covers 25-250 kHz depending on the transducer, and supports sounder power from 25 to 3,000 W RMS.\u003c\/p\u003e\u003cp\u003eIt can run two transducers at once using its dual-transceiver architecture, which helps on boats with multi-transducer layouts or when you want independent sonar operation at the same time. Maximum depth is rated up to 10,000 ft (3,048 m) depending on transducer choice and water conditions.\u003c\/p\u003e\u003cp\u003eThe enclosure is fully gasketed and water resistant to IEC 60529 IPX7, with a size of 274 x 373 x 100 mm (10.8 x 14.7 x 3.9 in.). Power usage is up to 100 W and the recommended fuse is 10 A.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOutputs sonar data over the Garmin Marine Network for display and control on a compatible Garmin chartplotter or MFD\u003c\/li\u003e\n\u003cli\u003eDual-transceiver design supports simultaneous and independent transducer operation\u003c\/li\u003e\n\u003cli\u003eFrequency range 25-250 kHz (transducer dependent) for traditional sonar and CHIRP\/spread-spectrum transducer setups\u003c\/li\u003e\n\u003cli\u003eSounder power rated 25-3,000 W RMS (dependent on transducer rating and depth)\u003c\/li\u003e\n\u003cli\u003eMaximum depth rating up to 10,000 ft (3,048 m), dependent on transducer, water salinity, bottom type, and conditions\u003c\/li\u003e\n\u003cli\u003e10-35 VDC input for 12 V and 24 V systems; draws up to 100 W and uses a 10 A fuse\u003c\/li\u003e\n\u003cli\u003eFully gasketed aluminum and steel housing with IPX7 water resistance; compass-safe distance 60 cm (23.6 in.)\u003c\/li\u003e\n\u003cli\u003eOperating temperature range from -15 to 70 C (5 to 158 F)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the module in a location where it cannot be submerged and where it has ventilation around the case. Leave enough clearance to route and service the power lead, the marine network cable, and the transducer wiring at the terminal block.\u003c\/p\u003e\u003cp\u003eKeep the power run clean and protected with the specified 10 A fuse, and plan cable routing away from heat sources and moving parts. Maintain the 60 cm compass-safe distance when choosing a mounting spot and routing cables near sensitive instruments.\u003c\/p\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eThe GSD 26 sends sonar over the Garmin Marine Network and relies on a compatible Garmin display for control and on-screen views. A transducer is required, and the results you see depend heavily on matching the transducer type and power rating to the hull, typical depths, and bottom conditions you fish.\u003c\/p\u003e\u003cp\u003eTransducer connections terminate on the internal terminal block, and the module supports common CHIRP\/spread-spectrum wiring layouts, including single-element and dual-element arrangements. Taking time to verify wire mapping and strain relief before final tightening helps avoid intermittent sonar performance later.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis module fits boats that already run a Garmin Marine Network display and want a dedicated sounder with headroom for deeper water work. It also suits multi-transducer installations where two independent sonar sources need to be available at the same time.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGSD 26 main unit\u003c\/li\u003e\n\u003cli\u003ePower connection cable\u003c\/li\u003e\n\u003cli\u003eMarine networking cable (6 ft)\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eSoftware refresh SD card\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52268981354677,"sku":"QBP515630","price":2099.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298817_qbp515630.jpg?v=1771541258"},{"product_id":"qbp348000","title":"Garmin GSD 25 Sonar Module, Dual-Channel 1kW CHIRP, DownVu, SideVu","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-01159-00 is a network sonar module that adds 1 kW dual-channel CHIRP plus CHIRP DownVü and SideVü scanning sonar to a compatible Garmin chartplotter over the Garmin Marine Network. It runs on 10 to 35 Vdc and is rated IPX7 for incidental water exposure, so it fits well in a protected console or electronics bay where it stays dry and has ventilation.\u003c\/p\u003e\u003cp\u003eWith an appropriate transducer, traditional sonar can reach depths up to 5,000 ft (1,524 m). For scanning, maximum depths are up to 1,000 ft (305 m) on DownVü and up to 750 ft (229 m) to each side on SideVü; actual performance depends on the transducer, water conditions, and bottom type. The module measures 9.9 x 7.6 x 2.6 in (251 x 192 x 66 mm) and weighs 1.7 lb (771 g).\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTrue dual-channel 1 kW CHIRP (40 to 250 kHz) for running two CHIRP ranges at once when supported by your transducer\u003c\/li\u003e\n\u003cli\u003eCHIRP DownVü and SideVü scanning support (CHIRP 455\/800 kHz and 260\/455 kHz, transducer dependent) for structure and fish below and to the sides\u003c\/li\u003e\n\u003cli\u003eMaximum depth ratings: 5,000 ft traditional, 1,000 ft DownVü, and 750 ft per side on SideVü (dependent on transducer and conditions)\u003c\/li\u003e\n\u003cli\u003eSonar data output over the Garmin Marine Network for use on a compatible networked Garmin chartplotter\u003c\/li\u003e\n\u003cli\u003e10 to 35 Vdc input with 27 W maximum power use, and a specified 4.0 A fuse on the power lead\u003c\/li\u003e\n\u003cli\u003eFully gasketed polycarbonate case with an IPX7 water rating and operating range from -15 to 70 C\u003c\/li\u003e\n\u003cli\u003eCompass safe distance of 30 cm (11.8 in) for planning mounting locations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the module in a location where it cannot be submerged and where air can circulate around it. Leave room to connect the transducer cable, the Garmin Marine Network cable, and the power lead, and keep the status LEDs visible so you can quickly confirm it is communicating on the network.\u003c\/p\u003e\u003cp\u003ePower input is 10 to 35 Vdc, which covers typical 12 V and 24 V systems. Keep the in-line fuse in place on the power cable, support the wiring so it does not vibrate against sharp edges, and plan the installation so the unit stays at least 30 cm (11.8 in) from a magnetic compass. On fiberglass surfaces, a light countersink in the gelcoat helps reduce the chance of cracking when the mounting screws are tightened.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe GSD 25 connects to a Garmin chartplotter through the Garmin Marine Network and relies on the display for sonar control and viewing. It is commonly used with networked GPSMAP installations, including GPSMAP 7400\/7600 series displays and GPSMAP 8000 Glass Helm series systems.\u003c\/p\u003e\u003cp\u003eTransducer choice determines which sonar views are available and how deep you can read. A compatible transducer is required and sold separately, and maximum depth varies with water conditions, salinity, and bottom type.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis module is a practical match for boats where you want the sounder hardware off the helm display and installed closer to the transducer cable run, such as larger center consoles, pilothouse boats, and sportfishing setups with a dedicated electronics compartment. It also suits anglers who want dual-channel CHIRP for offshore bottom work while keeping scanning sonar available for reading structure and bait on the way inshore.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically check that connectors are fully seated and that cables are still supported after a season of vibration and washdowns. If the unit is installed in a warm compartment, keep vents clear and avoid packing gear tightly around it so heat can dissipate.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGSD 25 module\u003c\/li\u003e\n\u003cli\u003eRight-angle power cable (6 ft)\u003c\/li\u003e\n\u003cli\u003eRight-angle network cable (6 ft)\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269035651253,"sku":"QBP348000","price":949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298948_qbp348000.jpg?v=1771541541"},{"product_id":"qbp472591","title":"Garmin GND 10 Black Box Bridge, Nexus to NMEA 2000, IPX7, 9-16V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-01226-00 is a black box bridge that converts data between a Nexus network and an NMEA 2000 network so instruments, sensors, and displays can share the same sailing information.\u003c\/p\u003e\u003cp\u003eIt links older Nexus systems into an NMEA 2000 backbone without a manual setup process, and it keeps Nexus and Garmin gear talking cleanly, including support for gWind and gWind Race wind transducers. Connection is straightforward with Nexus, NMEA 2000, and USB in the mix, and the included cabling covers common installs with an NMEA 2000 drop cable (2 m) and a Nexus network cable (5 m).\u003c\/p\u003e\u003cp\u003eWhen you plug it into a computer over USB, it also opens up PC-based sailing tools. Programs like NexusRace, Expedition, Adrena, and SeaTrack can pass sailing-specific functions across Nexus and NMEA 2000, and you can handle software updates, configuration, and calibration tasks through NexusRace using the FDX protocol. On board, it can also pass control functions like Nexus instrument lighting levels, plus race start timers and distance logs, through connected NMEA 2000 equipment.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBridges Nexus network data onto NMEA 2000 and translates data back the other way for mixed-system boats\u003c\/li\u003e\n\u003cli\u003eWorks with Nexus instruments and sensors alongside Garmin equipment, including gWind and gWind Race wind transducers\u003c\/li\u003e\n\u003cli\u003ePlug-and-play connections between Nexus, NMEA 2000, and USB with no manual system configuration required\u003c\/li\u003e\n\u003cli\u003eUSB connection supports NexusRace, and enables PC software like Expedition, Adrena, and SeaTrack to exchange sailing functions across both networks\u003c\/li\u003e\n\u003cli\u003eSupports software updates over NMEA 2000 and device configuration, calibration, and updates via USB using the FDX protocol\u003c\/li\u003e\n\u003cli\u003eAllows Nexus instrument lighting levels to be controlled from NMEA 2000-connected equipment\u003c\/li\u003e\n\u003cli\u003eEnables race start timer and distance log functions from NMEA 2000-connected Garmin equipment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGND 10 black box bridge\u003c\/li\u003e\n\u003cli\u003eUSB Mini-B cable\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 drop cable (2 m)\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 T-connector\u003c\/li\u003e\n\u003cli\u003eNexus network cable (5 m; straight connector)\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the unit where cabling can reach both networks cleanly, such as behind the nav station, inside the electronics bay, or near the Nexus bus. Plan for strain relief so the Nexus network cable and the NMEA 2000 drop cable are not carrying vibration loads at the connectors, and leave enough access to use the USB port when you need PC configuration or calibration.\u003c\/p\u003e\u003cp\u003eOn the NMEA 2000 side, it installs as a drop off the backbone using the included T-connector, so it fits into standard NMEA 2000 layouts. On the Nexus side, it connects directly into the Nexus network cabling, acting as the translator between the two systems.\u003c\/p\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eThis bridge is meant for boats that already have Nexus instruments and sensors and want those readings available on an NMEA 2000 network. It is also useful when your Garmin displays, instruments, or other NMEA 2000 devices need access to sailing data coming from Nexus gear, while still keeping Nexus network functions available where supported.\u003c\/p\u003e\u003cp\u003eIf you plan to use PC racing or performance software, place the unit where a laptop can be connected by USB without pulling on the wiring, since that connection is what enables NexusRace configuration and calibration workflows.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a practical fit for sailboats that are modernizing electronics in stages, especially when a Nexus wind package is staying in place while an NMEA 2000 backbone and newer displays are being added. It also suits racers who want race timers, distance logs, and sailing-specific software tools to remain part of the onboard workflow while moving data across both networks.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269064847541,"sku":"QBP472591","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298912_qbp472591.jpg?v=1771541693"},{"product_id":"qbp171861","title":"Garmin LiveScope GLS 10 Sonar Module, For LVS32 Transducer, 10-32V, IPX7","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12954-00 is a GLS 10 sonar module that links a LiveScope transducer to a compatible Garmin chartplotter over the Garmin Marine Network for live, real-time scanning sonar views. It runs on 10 to 32 Vdc (12V or 24V systems) and draws about 21 W in normal use (up to 58 W), with a compact black-box footprint of 245 x 149 x 65 mm (9.7 x 5.9 x 2.6 in.).\u003c\/p\u003e\u003cp\u003eThis module is the hub for LiveScope setups, taking the transducer signal and putting it on the network so it can be displayed and shared on connected Garmin chartplotters. It works with compatible LiveScope transducers including LVS32, LVS34, and LiveScope XR LVS62 (transducer sold separately).\u003c\/p\u003e\u003cp\u003eIt is a good match for boats that already have Garmin Marine Network on board and want to add LiveScope, replace a GLS 10 module, or run LiveScope views on more than one networked display.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10 to 32 Vdc input for 12V and 24V electrical systems.\u003c\/li\u003e\n\u003cli\u003ePower draw rated at 21 W typical and 58 W max for planning wiring and load.\u003c\/li\u003e\n\u003cli\u003e7.5 A fast-acting fuse integrated on the power lead.\u003c\/li\u003e\n\u003cli\u003eGarmin Marine Network data output with 1 network port (small connector).\u003c\/li\u003e\n\u003cli\u003eCompatible with LiveScope transducers including LVS32, LVS34, and LiveScope XR LVS62 (transducer not included).\u003c\/li\u003e\n\u003cli\u003e245 x 149 x 65 mm housing and 1.96 kg (4.33 lb) weight for mounting planning.\u003c\/li\u003e\n\u003cli\u003eCompass-safe distance listed at 178 mm (7 in.) to help avoid interference near compasses and sensors.\u003c\/li\u003e\n\u003cli\u003eStatus LED supports quick checks for connected, waiting to connect, updating, and fault conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGLS 10 sonar module\u003c\/li\u003e\n\u003cli\u003ePower cable with in-line fuse\u003c\/li\u003e\n\u003cli\u003e2 m Garmin Marine Network cable (small connector)\u003c\/li\u003e\n\u003cli\u003eGarmin Marine Network adapter cable (small connector to large)\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe GLS 10 connects to a compatible Garmin chartplotter through the Garmin Marine Network, so your display needs network support for LiveScope. If your boat already has a Garmin Marine Network backbone for radar or chart sharing, the module can be added as another network device so LiveScope views are available on connected stations.\u003c\/p\u003e\u003cp\u003ePlan the mounting location with the compass-safe distance in mind, and leave room at the connectors for a clean cable bend radius and service access.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the module in a location where it will not be submerged, with the status LEDs visible and the cables able to reach without strain. On most boats, that means inside the console, under a helm seat, or in a dry electronics compartment above the bilge line.\u003c\/p\u003e\u003cp\u003eRoute the transducer and network cables away from high-current wiring when possible, and support the run so vibration and steering movement do not work-harden the cable at the connectors.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003ePower the module from a clean 12V or 24V feed, keeping voltage drop low under load. The supplied power lead is 9 ft (2.7 m); when extending, use 10 AWG up to 15 ft (4.6 m) of extension, 8 AWG up to 23 ft (7 m), or 6 AWG up to 36 ft (11 m).\u003c\/p\u003e\u003cp\u003eOn the network side, connect the module to your Garmin Marine Network using the included cable and the included adapter cable when your chartplotter uses the larger network connector style.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically check that the power and network connectors stay fully seated and dry, especially after heavy washdowns or trailering. If the boat lives in a salt environment, a quick wipe-down around the module and cable runs helps keep salt buildup from migrating into connectors over time.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269166559413,"sku":"QBP171861","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299308_qbp171861.jpg?v=1771542316"},{"product_id":"qbp522469","title":"Garmin GPSMAP 8700 Black Box Chartplotter, NMEA 2000, HDMI Output","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-02094-00 is a GPSMAP 8700 black box chartplotter that runs a helm display from an external monitor while tying navigation, sonar, and onboard data into one interface. It powers from 10 to 32 Vdc through a 10 A fast-acting fuse and carries an IPX7 water rating for incidental exposure in a marine environment.\u003c\/p\u003e\u003cp\u003eThis unit has no built-in screen. Video goes out over HDMI to a compatible Garmin marine monitor or a third-party touchscreen, and the processor mounts out of sight in a dry, ventilated space. The housing combines polycarbonate plastic with die-cast aluminum, and the chassis measures 38.3 x 19.8 x 4.7 cm, which helps when planning a tight electronics bay.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eExternal-monitor operation: HDMI OUT is required for functionality; supports Garmin marine monitors and compatible third-party touchscreen displays\u003c\/li\u003e\n\u003cli\u003eThird-party touchscreen control uses HDMI for video and USB for touch input, keeping the helm wiring straightforward\u003c\/li\u003e\n\u003cli\u003eNetworked helm integration through Garmin Marine Network and NMEA 2000, with support for NMEA 0183 and J1939 connections\u003c\/li\u003e\n\u003cli\u003eVideo inputs for adding onboard cameras or other sources: HDMI IN plus composite video in (BNC)\u003c\/li\u003e\n\u003cli\u003eIPX7-rated enclosure and materials suited to typical helm and electronics-compartment conditions, plus an operating range of -15 to 55 C\u003c\/li\u003e\n\u003cli\u003eTypical current draw of 1.5 A at 12 Vdc, with a maximum current draw of 6.0 A at 12 Vdc, for realistic power budgeting\u003c\/li\u003e\n\u003cli\u003eBuilt-in Wi-Fi and ANT wireless support and compatibility with OneHelm integration for supported onboard systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and display requirements\u003c\/h6\u003e\u003cp\u003ePlan the system around the monitor you will use. A third-party touchscreen connects with HDMI for the picture and USB for touch control, while Garmin marine monitors can also be part of a Garmin Marine Network station setup so data and control can be shared across multiple helm locations.\u003c\/p\u003e\u003cp\u003eChart and user-data storage is handled with an external card reader (not built into the black box). If you expect to manage charts from the helm, account for the card reader location and cable routing when you lay out the dash and console.\u003c\/p\u003e\u003ch6\u003eNetworking and sonar integration\u003c\/h6\u003e\u003cp\u003eOn the boat, this black box is the hub that lets radar, sonar sources, and mapping data move between stations over the Garmin Marine Network, while NMEA 2000 ties in common sensors and control data. It also supports adding sonar components such as Garmin black box sonar modules and live-sonar systems, and it can share sonar views across the network when the rest of the system is set up for sharing.\u003c\/p\u003e\u003cp\u003eFor higher update-rate positioning, it can pair with an external GPS 19x 10 Hz GPS and GLONASS receiver. That type of setup is common on faster boats and on multi-helm builds where you want consistent heading and position behavior on every screen.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring notes\u003c\/h6\u003e\u003cp\u003eMount the processor where it will not be submerged and where air can move around it, such as inside a console or an electronics locker. Keep space for cable bends and connectors, and avoid stacking it against heat sources since sustained high temperatures can shorten electronics life.\u003c\/p\u003e\u003cp\u003ePower is typically run through an ignition or a dedicated helm switch so the unit comes on with the rest of the electronics. When expanding the Garmin Marine Network, keep all networked devices on a common ground and avoid connecting third-party PoE devices directly without the proper isolation hardware.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats that want a clean glass-helm look, refits where you already have a quality monitor, or multi-station layouts where you want the processing hidden and the displays at the dash, flybridge, or cockpit. It is also a sensible choice when you expect to combine navigation with sonar, cameras, and engine data on one touch interface.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269210566837,"sku":"QBP522469","price":4099.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299274_qbp522469.jpg?v=1771542472"},{"product_id":"qbp119533","title":"Garmin Panoptix LiveScope Scanning Sonar System, GLS 10 Sonar Black Box, LVS32 Transducer, Thru-Hull Mount, 10-32V, IPX7, Up to 200 ft","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-02233-00 is a Panoptix LiveScope live-scanning sonar system that pairs the GLS 10 black box sonar module with an LVS32-TH thru-hull transducer for Garmin Marine Network chartplotters. The transducer is rated for up to 200 ft (61 m) of maximum depth\/distance and operates from 530 to 1,100 kHz, giving you a live view of fish movement and structure instead of a scrolling history.\u003c\/p\u003e\u003cp\u003eThis is a thru-hull setup, so the transducer lives below the waterline in clean water flow when it is mounted correctly. The LVS32-TH has a 135 degree front-to-back field of view with a 20 degree side-to-side sweep, which is useful when you want to watch what is happening ahead of the boat or under it without relying on a trolling-motor mount.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLiveScope live-scanning sonar view with a maximum depth\/distance rating of 200 ft (61 m), which varies with water conditions.\u003c\/li\u003e\n\u003cli\u003eLVS32-TH field of view: 135 degrees front to back and 20 degrees side to side for a wide look under and around the hull.\u003c\/li\u003e\n\u003cli\u003eTransducer frequency range: 530 to 1,100 kHz.\u003c\/li\u003e\n\u003cli\u003eGLS 10 power input from 10 to 32 Vdc for 12 V and 24 V systems; power usage is 21 W typical and 58 W max.\u003c\/li\u003e\n\u003cli\u003eGarmin Marine Network data output from the GLS 10 to the chartplotter (not a stand-alone display).\u003c\/li\u003e\n\u003cli\u003eFairing block use is recommended when the mounting-location deadrise exceeds 5 degrees; the fairing block cutting angle is limited to 25 degrees.\u003c\/li\u003e\n\u003cli\u003eMetal-hull installs use an isolation plate, and the transducer must be secured with at least one anti-rotation bolt to prevent it from turning under way.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGLS 10 sonar module\u003c\/li\u003e\n\u003cli\u003eLVS32-TH thru-hull transducer\u003c\/li\u003e\n\u003cli\u003eFairing block (with backing block use from the remaining section during installation)\u003c\/li\u003e\n\u003cli\u003eIsolation plate for aluminum or steel hull installations\u003c\/li\u003e\n\u003cli\u003eAnti-rotation hardware and thru-hull mounting hardware\u003c\/li\u003e\n\u003cli\u003eTransducer drilling template\u003c\/li\u003e\n\u003cli\u003eAnti-seize compound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eThe GLS 10 outputs sonar data over Garmin Marine Network, so your chartplotter needs a compatible Garmin Marine Network connection to display LiveScope views. Plan a clean power feed to the module (10 to 32 Vdc) and mount the black box where it has ventilation and where you can reach the network, power, and transducer connections without putting strain on the cables.\u003c\/p\u003e\u003cp\u003eFor mounting near sensitive instruments, the compass-safe distance for the sonar module is 7 in (178 mm). Software updates matter with LiveScope; make sure your chartplotter software is current before the first trip so features like stabilization and transducer-orientation handling behave as expected.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eA thru-hull LiveScope install is a real hull penetration, so take the time to pick a spot with smooth water flow and clear access inside the boat for washers, nuts, and sealing. Avoid locations behind strakes, intakes, discharges, or anything that can introduce air bubbles or turbulence around the transducer face. The transducer and fairing should end up parallel to the keel for consistent sonar coverage.\u003c\/p\u003e\u003cp\u003eIf the deadrise at the mounting point is over 5 degrees, a fairing block is used to level the transducer, and the fairing block can only be cut up to 25 degrees. For fin-keel sailboats, a common placement is 10 to 30 in in front of the keel and no more than 4 in to the side of the centerline, keeping the beam clear of keel shadow and aeration.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter launching, check for leaks around any below-waterline work before leaving the boat in the water for extended periods. Keep the transducer face clean, since marine growth can reduce performance quickly; wash with mild detergent and a soft cloth, and use a scouring pad only when fouling is heavy.\u003c\/p\u003e\u003cp\u003eTo slow growth and help protect against corrosion on metal hardware, apply a water-based anti-fouling paint to the transducer about every six months. Avoid ketone-based anti-fouling paints, which can damage plastics used in transducer housings.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis setup makes sense for boats that want LiveScope performance without a trolling-motor mount, including offshore and inshore fishing boats, sailboats, and larger center consoles where a thru-hull location keeps the transducer in stable water flow. It is also a good match when you want the LiveScope view available at the helm and at the fishing station through a networked Garmin chartplotter.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269212958901,"sku":"QBP119533","price":2099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299276_qbp119533.jpg?v=1771542494"},{"product_id":"qbp453615","title":"Garmin AIS 800 Class B\/SO AIS Transceiver, 5W, VHF Antenna Splitter, NMEA 2000, NMEA 0183, Built-In GPS, IPX7","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-02087-00 is an AIS 800 black box transceiver that receives AIS targets and broadcasts your vessel data so other boats can see you on their AIS and chartplotter screens. It transmits at 5 W (Class B, SOTDMA) and runs on 12 to 24 Vdc (2 A max) with a 5 A fast-acting fuse.\u003c\/p\u003e\u003cp\u003eIt includes an internal GPS antenna and a built-in VHF antenna splitter, so one VHF antenna can be shared between AIS and a connected VHF radio. The housing measures 175 x 142.3 x 54.5 mm (6.9 x 5.6 x 2.1 in.) and weighs 414 g (0.9 lb), which makes it easier to tuck behind a helm, under a nav station, or in an electronics locker where it stays dry and has ventilation.\u003c\/p\u003e\u003cp\u003eThe unit is rated IPX7 and has a compass-safe distance of 40 cm (15 3\/4 in.). Operating temperature range is -15 to 55 C (5 to 131 F).\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eClass B SOTDMA AIS transceiver with 5 W transmit power (can be reduced to 1 W when commanded by authorities)\u003c\/li\u003e\n\u003cli\u003e12 to 24 Vdc input (2 A max); current draw is less than 400 mA at 12 Vdc and less than 250 mA at 24 Vdc\u003c\/li\u003e\n\u003cli\u003eBuilt-in GPS with a dedicated port for an optional external GPS antenna when reception is limited\u003c\/li\u003e\n\u003cli\u003eInternal VHF antenna splitter to share a single antenna between AIS and a connected VHF radio\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 connectivity (LEN 2) plus NMEA 0183 wiring for integration with a wide range of displays and instruments\u003c\/li\u003e\n\u003cli\u003eUSB connection for programming and setup from a computer\u003c\/li\u003e\n\u003cli\u003eOptional silent mode input supports a switch to stop transmitting while still receiving AIS data\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the unit where it will not be submerged and where air can circulate around it. Keep it away from heat sources and extreme compartments; the operating range is -15 to 55 C. For compass accuracy, maintain at least 40 cm of separation from a magnetic compass.\u003c\/p\u003e\u003cp\u003eBefore it can transmit, the AIS 800 must be programmed with your vessel MMSI and static data. Once an MMSI is assigned, it cannot be changed without a factory reset. If you want a dedicated silent mode switch at the helm, the unit supports a simple toggle input (switch not included).\u003c\/p\u003e\u003ch6\u003eAntenna, GPS, and placement notes\u003c\/h6\u003e\u003cp\u003eA VHF or AIS antenna is required. For best AIS performance, use an AIS antenna or a VHF antenna tuned for AIS frequencies with VSWR 2:1 or less at 162 MHz. When the VHF radio is transmitting through the shared antenna, AIS reception pauses during that transmit time, which is normal behavior for a shared-antenna setup.\u003c\/p\u003e\u003cp\u003eThe internal GPS works best when the unit is mounted above the waterline and spaced at least 20 cm (7.9 in.) from cables, metal objects, and other electronics. In metal-hulled boats, plan on using an external GPS antenna connected to the GPS antenna port.\u003c\/p\u003e\u003cp\u003eFor RF exposure considerations, install the antenna so people can remain at least 2.48 m (97.64 in.) from it during transmission when using an omni-directional 6 dBi antenna.\u003c\/p\u003e\u003ch6\u003eSystem integration and compatibility\u003c\/h6\u003e\u003cp\u003eUse NMEA 2000 to share AIS targets and vessel information with compatible chartplotters and displays over the backbone. The AIS 800 also supports NMEA 0183 connections for installations that use legacy wiring. In a NMEA 2000 network, the unit can follow the network power behavior, while the main power connection is still required at the device.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats that run in shipping lanes, coastal traffic, or busy fishing grounds and want AIS visibility on their navigation display without adding another screen at the helm. It also fits refits where you want AIS transmit and receive, a built-in GPS, and an antenna-sharing path to an existing VHF radio.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269264863413,"sku":"QBP453615","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299179_qbp453615.jpg?v=1771542931"},{"product_id":"qbp783976","title":"Garmin Reactor 40 Course Computer Unit, For Viking VIPER, NMEA 2000","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11052-66 is a Course Computer Unit (CCU) for a Reactor 40 Steer-by-Wire autopilot system installed on boats with a Viking VIPER steer-by-wire steering setup. It contains the sensors the autopilot uses to track heading and rate of turn, and it ties into both the steering system and your NMEA 2000 network.\u003c\/p\u003e\u003cp\u003ePlan the install around cable reach and clean sensor placement: the CCU-to-steering cable is 3 m (9 ft.) long and is not meant to be cut. NMEA 2000 backbone power for the autopilot network is 9 to 16 VDC, so 24 V boats typically feed the backbone from a regulated 12 V supply.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCourse Computer Unit for Reactor 40 Steer-by-Wire autopilot systems used with Viking VIPER steer-by-wire steering\u003c\/li\u003e\n\u003cli\u003eSenses heading and rate of turn for the autopilot to steer accurately\u003c\/li\u003e\n\u003cli\u003eConnects to the boat steering controller CAN bus and to the NMEA 2000 network for control and data sharing\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 backbone power requirement: 9 to 16 VDC\u003c\/li\u003e\n\u003cli\u003eCCU cable to the steering system is 3 m (9 ft.) and must not be cut; longer runs use an extension cable\u003c\/li\u003e\n\u003cli\u003eMounts in any orientation in a non-submerged area; placement near the boat’s center of rotation helps sensor performance\u003c\/li\u003e\n\u003cli\u003eMounting screws are supplied; alternate hardware should be stainless or brass and checked with a handheld compass for magnetic effect\u003c\/li\u003e\n\u003cli\u003eDielectric grease on the cable connector pin holes helps prevent corrosion in saltwater installs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis CCU is intended for Reactor 40 Steer-by-Wire installations on Viking yachts equipped with a Viking VIPER steer-by-wire steering system. It connects on NMEA 2000 to communicate with a Garmin helm control such as the GHC 20, and it can also be configured and controlled from a compatible Garmin chartplotter when no dedicated helm control is installed.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm your boat has the VIPER steer-by-wire steering controller interface used by the Reactor 40 steer-by-wire system, and confirm you have an available spot on the NMEA 2000 backbone for another T-connector and drop.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the CCU on a rigid surface in a non-submerged location, as close as practical to the boat’s center of rotation. It can be mounted in any orientation, but it needs a clean magnetic environment to read correctly.\u003c\/p\u003e\u003cp\u003eKeep the mounting area clear of magnetic and electrical noise sources: avoid locations within 60 cm (2 ft.) of iron, magnets, high-current wiring, or pumps that cycle on and off, and keep large speaker magnets at least 1.5 m (5 ft.) away. A handheld compass check at the mounting point is a practical way to catch interference before you drill.\u003c\/p\u003e\u003cp\u003eRoute the CCU cable to the steering system connection or CAN bus and protect the connector with dielectric grease, especially on saltwater boats. Leave strain relief and a service loop so the cable is not pulling on the connector when the boat is pounding or vibrating.\u003c\/p\u003e\u003ch6\u003eElectrical and network integration\u003c\/h6\u003e\u003cp\u003eThe autopilot network runs on NMEA 2000, which should be powered from 9 to 16 VDC through a switch or the boat’s ignition circuit so the network does not sit on the battery when the boat is off. Only one power feed should be used on a given NMEA 2000 backbone.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a practical replacement part when a Viking VIPER Reactor 40 steer-by-wire system needs a CCU swap, or when you are building out a steer-by-wire autopilot setup and already have the rest of the system. It fits boats that spend hours on long runs, troll for extended stretches, or want steadier steering while managing lines and electronics at the helm.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eIf you add speakers, amplifiers, or heavy wiring after the install, it is worth re-checking the CCU area for magnetic interference. Keeping connectors clean, dry, and protected helps avoid intermittent steering and sensor faults in wet, salty compartments.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269485850805,"sku":"QBP783976","price":6099.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300128_qbp783976.jpg?v=1771544236"},{"product_id":"qbp784013","title":"Garmin Reactor 40 Course Computer Unit, For Volvo Penta, NMEA 2000","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11052-68 is the Course Computer Unit (CCU) for Reactor 40 autopilot installations that interface with Volvo-Penta steering systems. It is the sensor and processing hub that tracks the boat heading and rate of turn so the autopilot can steer based on real-time motion data.\u003c\/p\u003e\u003cp\u003eThe CCU ties into a NMEA 2000 network to exchange data with a compatible helm control and other NMEA 2000 devices on board. This part is commonly used when building a Reactor 40 system around a Volvo-Penta setup, or when replacing a failed course computer in an existing installation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCourse Computer Unit (CCU) for Reactor 40 systems intended for Volvo-Penta steering integration\u003c\/li\u003e\n\u003cli\u003eMeasures heading and rate of turn for autopilot steering calculations\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 network connection for control and data sharing with compatible displays and onboard sensors\u003c\/li\u003e\n\u003cli\u003eWorks on the same NMEA 2000 backbone as a GHC 20 control unit and other NMEA 2000-compatible devices\u003c\/li\u003e\n\u003cli\u003eMounts on a rigid surface and should be kept clear of strong magnetic fields and high-current cabling to avoid sensor interference\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis CCU is intended for Reactor 40 autopilot configurations built around Volvo-Penta installations. It is not a complete autopilot by itself, and it relies on the rest of the Reactor 40 components, the correct steering interface hardware for the boat, and a properly built NMEA 2000 network.\u003c\/p\u003e\u003cp\u003eFor systems with more than one network on board, the CCU needs to be on the same NMEA 2000 network as the device used to configure and control the autopilot.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting location before drilling. A spot near the center of the boat, away from speakers, large DC motors, and heavy battery cable runs, helps the CCU sense clean heading and turn-rate data. A handheld compass is a quick way to check for magnetic interference in the area you are considering.\u003c\/p\u003e\u003cp\u003eAfter mounting, connect the CCU into the Reactor 40 harness and the NMEA 2000 network, then complete dockside setup and sea-trial calibration from the helm control or compatible Garmin display.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis CCU is a good match for Volvo-Penta boats that run longer stretches under power and want consistent course keeping for cruising, fishing, and trolling. It is also the right replacement part when a Reactor 40 system loses heading or turn-rate information and the rest of the steering hardware checks out.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269486080181,"sku":"QBP784013","price":3399.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300129_qbp784013.jpg?v=1771544237"},{"product_id":"qbp145681","title":"Garmin GPSMAP 9500 Black Box Chartplotter, Worldwide Basemap, HDMI Out, NMEA 2000, IPX7","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-02677-00 is a GPSMAP 9500 black box chartplotter with a worldwide basemap that runs a full helm on external monitors, with no built-in display. It powers from 10 to 32 Vdc for 12V and 24V systems, uses a 4 A fast-acting fuse, and carries an IPX7 water rating for incidental exposure on board.\u003c\/p\u003e\u003cp\u003eVideo is output over HDMI OUT (required for operation) and touchscreen control can be added through USB when used with a compatible monitor. The unit supports Garmin BlueNet networking, NMEA 2000, NMEA 0183, and J1939 engine integration, so it can sit at the center of a multi-screen system with connected sonar, radar, cameras, autopilot, sensors, and digital switching. Chart and mapping upgrades use an external card reader (not included), and the platform supports Garmin Navionics+ and Garmin Navionics Vision+ cartography.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBlack box chartplotter with HDMI OUT to drive an external monitor (HDMI OUT is required for the unit to function)\u003c\/li\u003e\n\u003cli\u003eTouchscreen support when paired with a compatible monitor using HDMI for video and USB for touch data\u003c\/li\u003e\n\u003cli\u003eTwo HDMI inputs for external sources: HDMI IN 1 supports up to 4K at 60 fps; HDMI IN 2 supports up to 4K at 30 fps\u003c\/li\u003e\n\u003cli\u003eComposite video input via CVBS IN (BNC) plus an audio out connection for system audio routing\u003c\/li\u003e\n\u003cli\u003ePower input from 10 to 32 Vdc with a 4 A, 42 V fast-acting fuse specification\u003c\/li\u003e\n\u003cli\u003eIPX7 water rating and a housing built from polycarbonate plastic with die-cast aluminum\u003c\/li\u003e\n\u003cli\u003eGarmin BlueNet networking for building multi-device helms, with up to 10 times faster networking speeds and gigabit-capable connectivity\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 and NMEA 0183 support for common marine sensors, radios, and autopilot integration, plus J1939 receive support for compatible engine data\u003c\/li\u003e\n\u003cli\u003eOneHelm integration support for compatible monitoring, control, and automation systems, including EmpirBus-based setups\u003c\/li\u003e\n\u003cli\u003eWi-Fi, Bluetooth, and ANT connectivity for wireless updates with the ActiveCaptain app and compatible device pairing\u003c\/li\u003e\n\u003cli\u003eExternal chart card support through a compatible USB card reader (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eDisplay and control options\u003c\/h6\u003e\u003cp\u003eThis system is built around your choice of display. HDMI OUT carries the video feed to a monitor, and a touchscreen monitor can control the system when its USB connection is run back to the unit. If your monitor is not touch-capable, the system can be operated with compatible remote input hardware on the network, which keeps the black box itself tucked away while the helm stays usable in rough water.\u003c\/p\u003e\u003ch6\u003eNetworking and system integration\u003c\/h6\u003e\u003cp\u003eFor bigger helms, Garmin BlueNet makes it practical to link chart views, sonar pages, radar overlays, cameras, and video sources across multiple stations without the lag you feel on slower networks. NMEA 2000 and NMEA 0183 connections cover most common marine electronics, and the J1939 interface adds engine data viewing on compatible systems for RPM, temperatures, alarms, and other engine parameters the network provides.\u003c\/p\u003e\u003ch6\u003eInstallation and power\u003c\/h6\u003e\u003cp\u003ePlan for cable routing and connector bend room. The unit measures 38.3 cm wide and 19.8 cm high, and it calls for 8.6 cm of clearance in front for connections. Mount it where it stays dry and ventilated, away from heat sources and high-interference wiring runs, and keep wiring tidy so vibration does not work connectors loose over time.\u003c\/p\u003e\u003cp\u003ePower is straightforward on both 12V and 24V boats thanks to the 10 to 32 Vdc input range. The unit turns on when power is applied, so many installs use a dedicated breaker or switch to control power at the panel. It is not powered through the NMEA 2000 network, so it must be connected to a proper vessel power feed even if it is already on a backbone.\u003c\/p\u003e\u003ch6\u003eCharts, sonar, and onboard use\u003c\/h6\u003e\u003cp\u003eThe GPSMAP 9500 platform supports Garmin Navionics+ and Garmin Navionics Vision+ cartography, with chart access handled through an external card reader (not included). Sonar options are supported through compatible sonar black boxes and transducers, which lets you build the system around the style of fishing you do without forcing a single transducer choice.\u003c\/p\u003e\u003cp\u003eThis setup makes the most sense on boats where you want clean dash real estate and flexible screen layouts, such as sportfishers, center consoles with multi-display panels, and larger cruisers where networking, video inputs, and engine data all land in one place.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGPSMAP 9500 Black Box\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 backbone\/drop cable (2 m) and T-connector\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269600440501,"sku":"QBP145681","price":5199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300697_qbp145681.webp?v=1771544801"},{"product_id":"qbp085238","title":"Garmin LiveScope Plus Ice Fishing System, GLS 10, LVS34-IF, 200 ft Range, 10-32V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-02706-40 is a LiveScope Plus ice-fishing sonar package that adds real-time Forward and Down views to a compatible Garmin chartplotter. It pairs a GLS 10 sonar module with an LVS34-IF transducer, running 530 to 1,100 kHz with 500 W transmit power and an on-screen view up to 200 ft.\u003c\/p\u003e\u003cp\u003eThis setup is meant for anglers who already run a Garmin GPSMAP or ECHOMAP display on the boat and want to take that same screen onto the ice. The included 0-degree pole mount keeps the transducer oriented correctly, and the system runs on 10 to 32 V DC so it fits typical 12V or 24V power setups.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLiveScope Forward and LiveScope Down views from the included LVS34-IF transducer\u003c\/li\u003e\n\u003cli\u003eUp to 200 ft maximum depth\/distance with a 20° x 135° beam pattern\u003c\/li\u003e\n\u003cli\u003eOperates at 530 to 1,100 kHz with 500 W transmit power for detailed, fast-updating returns\u003c\/li\u003e\n\u003cli\u003eGLS 10 sonar module accepts 10 to 32 V DC input and uses a 10 A fuse\u003c\/li\u003e\n\u003cli\u003eConnects to the chartplotter over Garmin Marine Network and uses a 21-pin transducer connection\u003c\/li\u003e\n\u003cli\u003e20 ft transducer cable helps reach from the hole or pole to the module without strain\u003c\/li\u003e\n\u003cli\u003eIPX7 water rating for wet, cold conditions and typical deck spray\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and system requirements\u003c\/h6\u003e\u003cp\u003eA compatible Garmin chartplotter is required for the display. This system connects through Garmin Marine Network and is used with select Garmin GPSMAP and ECHOMAP chartplotters, including ECHOMAP UHD, UHD2, Ultra, and Ultra 2 series units that support LiveScope.\u003c\/p\u003e\u003cp\u003ePlan space for the GLS 10 module and cable routing before you drill or mount anything. You will need a clean 10 to 32 V DC supply and a 10 A fused circuit for the sonar module.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the GLS 10 sonar module on a flat surface where it will stay secure and out of the way, then run the transducer cable to the module without tight bends or pinch points. On the ice, the pole mount keeps the LVS34-IF aligned so you can rotate between Forward and Down viewing as needed.\u003c\/p\u003e\u003cp\u003eTake a moment to secure cables so they do not snag boots or gear. In freezing conditions, keep connectors dry and free of ice, and stow cables so the jacket is not stressed when coiled.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLiveScope Plus LVS34-IF transducer\u003c\/li\u003e\n\u003cli\u003eGLS 10 sonar module\u003c\/li\u003e\n\u003cli\u003e0-degree pole mount\u003c\/li\u003e\n\u003cli\u003eLithium-ion four-in-one power cable\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis package is a good match for anglers who already run a Garmin chartplotter on the boat and want real-time sonar for hard-water trips without switching ecosystems. It is also useful when you want to watch fish movement and bait action live, especially when fine-tuning jig cadence in deeper water.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt or grit off the transducer and connectors after use, then dry everything before storage. Protect the cable ends, avoid sharp bends near the connectors, and check mounting fasteners periodically if the kit is transported often.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269752713397,"sku":"QBP085238","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301249_qbp085238.webp?v=1771545557"},{"product_id":"qbp543052","title":"Garmin STRIKER Cast Castable Sonar, 200 ft Wireless Range, IPX7, 2-150 ft Depth, 10 hr Rechargeable Battery","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin STRIKER Cast is a castable sonar device that sends live sonar to your phone or tablet through the STRIKER Cast app. It streams wirelessly up to 60 m (200 ft.) and reads depth from less than 0.6 m to 45 m (2 ft. to 150 ft.) using 260\/455 kHz sonar.\u003c\/p\u003e\u003cp\u003eDrop it straight down next to a dock, cast and retrieve from shore, or tether it behind a kayak at low speed to see fish targets, structure, and bottom return on your screen. The built-in rechargeable battery runs about 10 hours in typical use, and the housing floats with an IPX7 water rating for on-the-water spray and dunking.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWireless streaming range up to 60 m (200 ft.), with range affected by water conditions\u003c\/li\u003e\n\u003cli\u003e260\/455 kHz sonar with a depth range from less than 0.6 m to 45 m (2 ft. to 150 ft.)\u003c\/li\u003e\n\u003cli\u003eTraditional 2-D sonar view plus an ice fishing flasher view in the app\u003c\/li\u003e\n\u003cli\u003eFloatable housing with an IPX7 water rating\u003c\/li\u003e\n\u003cli\u003eBuilt-in rechargeable lithium-ion battery with about 10 hours typical runtime and about 1.5 hours charge time\u003c\/li\u003e\n\u003cli\u003eAutomatic on when placed in the water, with automatic off after about 2 minutes out of the water and disconnected\u003c\/li\u003e\n\u003cli\u003eConnects to one STRIKER Cast device at a time in the app\u003c\/li\u003e\n\u003cli\u003eIncluded tether length is 5 m (16 ft.) for tying off from a dock or bank\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations based on whether the device includes built-in GPS.\u003c\/p\u003e\u003cp\u003eGPS models add location-based functions in the app, including recording Garmin Quickdraw Contours. Non-GPS models focus on sonar streaming and viewing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-02246-00: With GPS No. Sonar streaming and viewing stays centered on what is under the device while you cast, retrieve, or tie off.\u003c\/li\u003e\n\u003cli\u003e010-02246-02: With GPS Yes. Adds GPS support in the app for recording Garmin Quickdraw Contours while you fish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eCharge the device over USB, install the STRIKER Cast app on your Apple or Android device, then place the unit in the water to power it on for pairing. Once connected, sonar data appears when the device is in the water.\u003c\/p\u003e\u003cp\u003eFor casting, it can be attached to a fishing line or the included tether. A 20 lb test or higher line is recommended, using a #3 barrel swivel with a snap on a medium-action or heavier rod.\u003c\/p\u003e\u003ch6\u003eCompatibility and use on board\u003c\/h6\u003e\u003cp\u003eSTRIKER Cast makes sense for anglers who fish from shore, docks, anchorages, kayaks, and small tenders where a fixed display and transducer are not practical. Keep your phone or tablet within wireless range of the device, and expect the usable range to vary with conditions on the water.\u003c\/p\u003e\u003cp\u003eIf you tow it behind a vessel, keep speeds low and avoid rough water. Towing faster than 8 km\/h (5 mph) or in choppy conditions can reduce sonar performance and can create safety issues.\u003c\/p\u003e\u003ch6\u003eCare and storage\u003c\/h6\u003e\u003cp\u003eAfter use, especially in saltwater, rinse the unit with fresh water and dry it thoroughly. Pay extra attention to the charging contacts and surrounding area before charging to help prevent corrosion. Do not store the device in the water.\u003c\/p\u003e\u003cp\u003eFor best battery care, charge it within 5 to 40°C (41 to 104°F).\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSTRIKER Cast device\u003c\/li\u003e\n\u003cli\u003eCarrying bag\u003c\/li\u003e\n\u003cli\u003e5 m (16.4 ft) tether\u003c\/li\u003e\n\u003cli\u003eUSB cable for charging\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"No","offer_id":52271451111605,"sku":"QBP543052-V1","price":149.99,"currency_code":"USD","in_stock":false},{"title":"Yes","offer_id":52271451144373,"sku":"QBP543052-V2","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1308445_qbp543052.webp?v=1771554961"},{"product_id":"qbp583835","title":"Garmin GCV 20 Ultra HD Scanning Sonar Black Box, For GT34UHD, ClearVü\/SideVü, 500W RMS, IPX7","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin GCV 20 is an Ultra High-Definition scanning sonar black box that adds ClearVü and SideVü views to a compatible chartplotter over the Garmin Marine Network. It runs on 10 to 35 Vdc (works on 12 V and 24 V systems) and transmits at 500 W RMS.\u003c\/p\u003e\u003cp\u003eThe module measures 192 x 251 x 66 mm (7.6 x 9.9 x 2.6 in.) and uses a fully gasketed polycarbonate case with an IPX7 water rating. It is meant to be mounted where it cannot be submerged, with ventilation around the unit, and at least 260 mm (10.2 in.) from a magnetic compass.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOutputs sonar data to compatible chartplotters over the Garmin Marine Network\u003c\/li\u003e\n\u003cli\u003eSupported CHIRP frequencies: 260, 455, 820, and 1120 kHz for ClearVü and SideVü scanning\u003c\/li\u003e\n\u003cli\u003e500 W RMS transmit power for Ultra High-Definition scanning performance\u003c\/li\u003e\n\u003cli\u003ePower input from 10 to 35 Vdc with 10.5 W maximum power usage\u003c\/li\u003e\n\u003cli\u003eUses a 4.0 A fast-acting mini blade fuse in the in-line fuse holder\u003c\/li\u003e\n\u003cli\u003eIPX7 water rating with a fully gasketed polycarbonate housing\u003c\/li\u003e\n\u003cli\u003eThree Garmin Marine Network ports for tying into a networked helm setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis sonar module is offered in two configurations based on whether a transducer is included in the box.\u003c\/p\u003e\u003cp\u003eBoth options use the same networked black box approach: connect the module to the Garmin Marine Network, provide fused DC power, then connect a GT34UHD-series scanning transducer to generate Ultra High-Definition ClearVü and SideVü images.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-02055-10: Includes transducer No. This configuration supplies the black box sonar module and is used when a compatible GT34UHD transducer is being sourced separately.\u003c\/li\u003e\n\u003cli\u003e010-02055-00: Includes transducer Yes. This configuration includes a GT34UHD-TM transom-mount transducer, with mounts to support common transom installs and trolling motor installs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe GCV 20 is meant for boats that already have, or are being rigged with, a compatible chartplotter on the Garmin Marine Network. Plan cable runs for DC power, the marine network connection (either to a network expander or directly to a chartplotter network port), and the transducer cable to the mounting location.\u003c\/p\u003e\u003cp\u003eUltra High-Definition scanning is done with GT34UHD transducer models (transom-mount, thru-hull, or paired thru-hull). Hull type, deadrise, and mounting hardware requirements are driven by the transducer selection and installation style, not by the black box module.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the module in a dry, ventilated compartment where the status LEDs can be seen and the connectors are easy to reach. Avoid forcing connectors into ports; align the connector notch, press the connector fully into place, then hand-tighten the locking ring so it stays secure under vibration.\u003c\/p\u003e\u003cp\u003eFor power, connect to a fused 10 to 35 Vdc supply and keep the in-line fuse holder in place with a 4.0 A fast-acting mini blade fuse. When fastening into fiberglass, a small countersink through the gelcoat helps reduce the chance of cracking, and an anti-seize lubricant on stainless screws can prevent binding during installation.\u003c\/p\u003e\u003ch6\u003eOn-the-water use\u003c\/h6\u003e\u003cp\u003eThe supported CHIRP frequency set (260, 455, 820, and 1120 kHz) lets you balance detail and range based on conditions and how you are using the boat. Maximum depth and side range depend on the transducer, bottom type, and water conditions, with the higher frequencies typically used when you want more definition at shorter ranges.\u003c\/p\u003e\u003cp\u003eThis setup fits boats that spend time fishing structure, reefs, and channel edges, and it also works well for coastal cruising where having clearer bottom detail helps when you are learning new water.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eThe IPX7 rating covers incidental water exposure, but the unit should not be mounted where it can be submerged. After salty runs or washdowns, rinse the area as needed and periodically check that locking rings are snug and cables are supported to prevent chafe.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"No","offer_id":52271504588981,"sku":"QBP583835-V1","price":419.99,"currency_code":"USD","in_stock":true},{"title":"Yes","offer_id":52271504621749,"sku":"QBP583835-V2","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1308981_qbp583835.jpg?v=1771555133"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/black-box-sonar.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}