{"title":"Autopilot Pumps","description":"","products":[{"product_id":"qbp868443","title":"Furuno - HRP11-12 Autopilot Pump","description":"\u003ch4\u003eUnleash the Power of Marine Navigation\u003c\/h4\u003e \u003cp\u003eIntroducing the high-performance Autopilot Pump that perfectly complements your marine journey. Designed to operate at 12 VDC, this Autopilot Pump effectively delivers a flow of 1.0 Cubic Inches Per Second, suitable for ram sizes up to 12 cubic inches in volume. Elevate your navigation experience with this must-have marine accessory.\u003c\/p\u003e \u003ch4\u003eKey Highlights to Dive Into\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eOptimized for 12 VDC operation.\u003c\/li\u003e \u003cli\u003eDelivers 1.0 Cubic Inches Per Second flow rate.\u003c\/li\u003e \u003cli\u003eIdeal for ram sizes of up to 12 Cubic Inches in Volume.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eDetailed Technical Specifications\u003c\/h4\u003e \u003cp\u003eDriven by excellence, our Autopilot Pump boasts of a seamless design for 12 VDC operation. With a commendable delivery rate of 1.0 Cubic Inches Per Second, it is tailored to handle ram sizes of up to 12 Cubic Inches in volume. Experience marine navigation like never before.\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023154409653,"sku":"QBP868443","price":810.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1210247_qbp868443.jpg?v=1763251168"},{"product_id":"qbp972698","title":"Furuno - Autopilot Pump","description":"\u003ch4\u003eNavigate The Waves With Precision\u003c\/h4\u003e \u003cp\u003eIntroducing the PUMPHRP17-12, a state-of-the-art reversing pumpset meticulously designed to interface with the acclaimed NavPilot series autopilot, ensuring your vessel stays on course with absolute precision. Developed to seamlessly blend with your hydraulic steering system, this cutting-edge equipment is a must-have for every marine enthusiast and professional.\u003c\/p\u003e \u003ch4\u003eUnder the Hood: Technical Insight\u003c\/h4\u003e \u003cp\u003eAt the heart of the PUMPHRP17-12 lies a reversible gerotor gear pump, encapsulated within a two-piece gear that's seated in an eccentric ring. The outcome? An unparalleled quiet, reliable, and pinpoint-accurate operation. As you turn your steering wheel, the hydraulic oil is pumped into the respective hydraulic steering line, leading to the movement of the cylinder. This linear movement is then transformed into a rotary motion, steering your vessel with precision. And with its remarkable 1.6 cu. in. oil output per second on a 12VDC input, the performance remains consistent and trustworthy.\u003c\/p\u003e \u003ch4\u003eDimensions \u0026amp; Sizing: Find Your Fit\u003c\/h4\u003e \u003cp\u003eDesigned for ram sizes ranging from 14 Cubic Inches to 25 Cubic Inches in volume, the PUMPHRP17-12 delivers 1.7 Cubic Inches Per Second. Ensuring a snug fit and optimal performance tailored to your vessel's needs.\u003c\/p\u003e \u003ch4\u003eKey Takeaways: Why Choose PUMPHRP17-12?\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eExpertly crafted to interface with the NavPilot series autopilot.\u003c\/li\u003e \u003cli\u003eFeatures a silent and efficient reversible gerotor gear pump.\u003c\/li\u003e \u003cli\u003eGuaranteed precise and reliable navigation.\u003c\/li\u003e \u003cli\u003eOptimized for ram sizes of 14 to 25 Cubic Inches in volume.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023154475189,"sku":"QBP972698","price":810.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1210249_qbp972698.jpg?v=1763251169"},{"product_id":"qbp338170","title":"Furuno - PUMPOCT16-12 Pump 12V - 1.6 Cubic Inches f\/RAM Sizes 12-23","description":"\u003ch4\u003eDiscover Quiet Power: The PUMPOCT16-12 Pump for Ultimate Hydraulic Steering\u003c\/h4\u003e \u003cp\u003eExperience unprecedented efficiency and silent operation with the PUMPOCT16-12 Pump, designed exclusively for RAM sizes ranging from 12-23 cubic inches. Revel in the versatility offered by this 1,600CC\/MIN Octopus pump that redefines installation flexibility, noise levels, and power consumption.\u003c\/p\u003e \u003ch4\u003eIngeniously Crafted: The Mechanics Behind the PUMPOCT16-12\u003c\/h4\u003e \u003cp\u003eEngineered for boats with hydraulic steering systems, this pump stands out for its industry-leading efficiency, minimizing power consumption even under the most demanding conditions. The meticulously designed gear pump not only allows for higher flow rates but also enhances performance, enabling compatibility with smaller autopilot course computers for added cost-efficiency.\u003c\/p\u003e \u003ch4\u003eDon't Sweat the Small Stuff: Dimensions and Mounting\u003c\/h4\u003e \u003cp\u003eOne of the smallest in its category, this pump's compact footprint opens up new horizons in installation flexibility. Dimensions will be made available upon product release.\u003c\/p\u003e \u003ch4\u003eSilence Is Golden: Why This Pump Stands Apart\u003c\/h4\u003e \u003cp\u003eThe design of the PUMPOCT16-12 pump is engineered to minimize noise and vibration, making it particularly suitable for sailboat installations.\u003c\/p\u003e \u003ch4\u003eKey Attractions: Features to Make You Say Wow!\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eRemarkable efficiency minimizes power consumption\u003c\/li\u003e \u003cli\u003eHighly flexible installation options due to small footprint\u003c\/li\u003e \u003cli\u003eLower noise and vibration levels are perfect for sailboats\u003c\/li\u003e \u003cli\u003eSuitable for both balanced and unbalanced hydraulic systems\u003c\/li\u003e \u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023225188533,"sku":"QBP338170","price":450.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1212360_qbp338170.jpg?v=1763252461"},{"product_id":"qbp681731","title":"Furuno - Type Autopilot Pump - 24V","description":"\u003ch4\u003eRevolutionize Your Navigation with Furuno PUMPHRP11-24 Autopilot Pump\u003c\/h4\u003e \u003cp\u003eEmbark on a seamless and sophisticated boating experience with the Furuno PUMPHRP11-24 Type Autopilot Pump. Engineered for precision and reliability, this 24V autopilot pump is designed to enhance your vessel's navigation capabilities, providing smooth and consistent helm control for up to 13 cubic inches of hydraulic ram volume. Its robust design and efficient performance make it an indispensable tool for mariners seeking to upgrade their vessel's autopilot system.\u003c\/p\u003e \u003ch4\u003eKey Features for Unmatched Performance\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eDesigned specifically for vessels with hydraulic steering systems.\u003c\/li\u003e \u003cli\u003eOptimal performance with 1.1 cubic inches per second flow rate.\u003c\/li\u003e \u003cli\u003eSupports hydraulic ram sizes of up to 13 cubic inches in volume.\u003c\/li\u003e \u003cli\u003e24V DC operation for energy-efficient and reliable performance.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eDurable and Efficient Design\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eConstructed with high-quality materials for longevity and resistance to harsh marine environments.\u003c\/li\u003e \u003cli\u003eCompact and lightweight design ensures easy installation and integration with existing autopilot systems.\u003c\/li\u003e \u003cli\u003eLow noise operation for a more pleasant boating experience.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eTechnical Specifications\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eVoltage: 24 VDC for efficient power consumption.\u003c\/li\u003e \u003cli\u003eFlow Rate: 1.1 cubic inches per second, catering to a wide range of hydraulic ram sizes.\u003c\/li\u003e \u003cli\u003eCompatibility: Ideal for hydraulic steering systems requiring up to 13 cubic inches of volume.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eInstallation and Safety\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eEasy to install with straightforward connections and minimal setup.\u003c\/li\u003e \u003cli\u003eComes with comprehensive instructions for hassle-free setup.\u003c\/li\u003e \u003cli\u003eWARNING: Follow all safety guidelines and regulations during installation and operation.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe Furuno PUMPHRP11-24 Type Autopilot Pump is a testament to Furuno's commitment to innovation, quality, and the marine community's safety. By integrating this autopilot pump into your vessel, you ensure smoother, more responsive steering control, enhancing your maritime adventures and ensuring your journey on the water is as enjoyable as it is safe.\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":52023525343413,"sku":"QBP681731","price":810.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1219714_qbp681731.jpg?v=1763255686"},{"product_id":"qbp834866","title":"Humminbird - HHRP11-12 Hydraulic Autopilot Pump","description":"\u003ch4\u003eNavigate with Confidence and Control\u003c\/h4\u003e\u003cp\u003eTake command of your marine vessel with the Humminbird HHRP11-12 Hydraulic Autopilot Pump. This top-of-the-line pump is engineered for precision and reliability, ensuring smooth and accurate steering for your boat. Designed with the finest components, it offers a full range of flow rates, pressure ratings, and oil tank capacities, making it an essential tool for any marine or navy application. Whether you're navigating challenging waters or maintaining a steady course, this hydraulic autopilot pump provides the responsiveness and control you need for a safe and enjoyable voyage.\u003c\/p\u003e\u003ch4\u003eKey Features for Enhanced Navigation\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal Flow Rate:\u003c\/strong\u003e The pump delivers a flow rate of 1.0 cubic inches per second, providing precise control over your vessel's movements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable Power:\u003c\/strong\u003e Operates at 12 VDC, offering consistent and dependable performance under various conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e Built with high-quality materials, ensuring longevity and durability even in demanding marine environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Insights for the Marine Professional\u003c\/h4\u003e\u003cp\u003eThis hydraulic autopilot pump is designed to meet the needs of professional mariners and recreational boaters alike. Its robust construction and advanced engineering make it a valuable addition to any vessel, offering reliable performance and easy integration with your existing systems.\u003c\/p\u003e\u003ch4\u003eProduct Dimensions for Your Vessel\u003c\/h4\u003e\u003cp\u003eWhile specific dimensions are not provided, the pump is compact enough to fit seamlessly into most marine setups, ensuring that it doesn't take up unnecessary space on your vessel.\u003c\/p\u003e\u003ch4\u003eFinishes and Build Quality\u003c\/h4\u003e\u003cp\u003eThe Humminbird HHRP11-12 boasts a sleek and functional design, crafted to withstand the harsh marine environment. Its durable finish protects the internal components, ensuring long-term reliability and performance.\u003c\/p\u003e\u003ch4\u003ePerfect for Marine and Navy Use\u003c\/h4\u003e\u003cp\u003eTailored for the marine industry, this hydraulic autopilot pump is ideal for use in a variety of applications, from recreational boating to professional marine operations. Its superior performance and reliability make it a trusted choice for maintaining course and navigating with precision.\u003c\/p\u003e\u003ch4\u003eUpgrade Your Vessel's Steering System\u003c\/h4\u003e\u003cp\u003eEnhance your boating experience with the Humminbird HHRP11-12 Hydraulic Autopilot Pump. With its advanced features and dependable construction, it offers unmatched control and ease of navigation, allowing you to focus on enjoying your time on the water.\u003c\/p\u003e","brand":"Humminbird","offers":[{"title":"Default Title","offer_id":52023629152437,"sku":"QBP834866","price":829.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1222325_qbp834866.jpg?v=1763256689"},{"product_id":"qbp402073","title":"Seastar - AP1219 Type 1 12V Pump 60CU Inch\/Min","description":"\u003ch4\u003ePrecision Marine Steering with the Seastar AP1219 Type 1 12V Pump\u003c\/h4\u003e\u003cp\u003eThe Seastar AP1219 Type 1 Autopilot Pump is a high-performance, reversible hydraulic pump designed to enhance marine steering systems with precision and reliability. Engineered for smooth operation, this fixed-flow pump minimizes vibration and noise, ensuring a seamless boating experience. Designed for use with autopilot systems, it delivers optimal fluid control for superior navigation.\u003c\/p\u003e\u003ch4\u003eReliable Performance for Marine Applications\u003c\/h4\u003e\u003cp\u003eBuilt with a long-life DC motor and advanced hydraulic technology, the Seastar AP1219 Type 1 pump ensures durability in harsh marine environments. Its corrosion-resistant construction and compliance with industry standards, including ABYC, CE, and J1171, make it a trusted choice for boaters seeking top-tier performance. With a compact design, simplified installation, and low power consumption, this pump is a vital component for smooth and efficient autopilot operation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 60 cubic inches per minute (no-load)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pressure:\u003c\/strong\u003e 1000 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical Current Draw:\u003c\/strong\u003e 4 - 8 amps (depending on application)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil Compatibility:\u003c\/strong\u003e Seastar Steering Fluid (MIL 5606)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.9 lbs (2.2 kg)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eSuperior Build and Compatibility\u003c\/h4\u003e\u003cp\u003eThe Seastar AP1219 Type 1 pump is compatible with standard Seastar hoses and features 9\/16\" x 24 UNEF thread fittings. Its wiring includes 24-inch leads with a 12 AWG gauge, and bare leads for flexible electrical connections.\u003c\/p\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLong-life DC motor with durable brushes\u003c\/li\u003e\n\u003cli\u003eCompact and efficient design\u003c\/li\u003e\n\u003cli\u003eLow vibration and noise operation\u003c\/li\u003e\n\u003cli\u003eEasy installation for seamless integration\u003c\/li\u003e\n\u003cli\u003eLow power consumption for efficient performance\u003c\/li\u003e\n\u003cli\u003eResistant to corrosion for long-lasting use\u003c\/li\u003e\n\u003cli\u003eFully compliant with ABYC, CE, and J1171 standards\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting bracket displacement included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seastar","offers":[{"title":"Default Title","offer_id":52023819403445,"sku":"QBP402073","price":723.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1228746_qbp402073.jpg?v=1763259004"},{"product_id":"qbp584320","title":"Seastar - AP1233 Type 2 Pump 12v 110 Cu In\/Min","description":"\u003ch4\u003eReliable and Efficient Autopilot Pump for Seamless Marine Navigation\u003c\/h4\u003e\u003cp\u003eThe Seastar AP1233 Type 2 Autopilot Pump is a high-performance, fixed-flow, reversible pump designed to integrate seamlessly with hydraulic steering systems. Built with an internal hydraulic gear pump, this unit delivers smooth and quiet operation, minimizing vibration and noise for an enhanced boating experience. Ideal for marine applications, this pump ensures precise and effortless autopilot control, providing reliability and efficiency on the water.\u003c\/p\u003e\u003ch4\u003eAdvanced Features for Optimal Performance\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-Lasting DC Motor:\u003c\/strong\u003e Engineered with long-life brushes to ensure extended service life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Design:\u003c\/strong\u003e Space-saving construction allows for easy installation in confined spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Power Consumption:\u003c\/strong\u003e Efficient operation to reduce energy usage without compromising performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet and Smooth Operation:\u003c\/strong\u003e Produces minimal noise and vibration, improving onboard comfort.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion-Resistant Build:\u003c\/strong\u003e Designed to withstand harsh marine environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulatory Compliance:\u003c\/strong\u003e Meets ABYC, CE, and J1171 standards for safety and reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-Inclusive Installation Kit:\u003c\/strong\u003e Comes with all necessary mounting bracket displacements for ease of installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pressure:\u003c\/strong\u003e 1000 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil Compatibility:\u003c\/strong\u003e Seastar Steering Fluid (MIL 5606)\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cstrong\u003eWire Details:\u003c\/strong\u003eLength: 24 inches\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eGauge: 12 AWG\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eConnector: None – Bare Leads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e Compatible with standard Seastar hose (Thread: 9\/16\" x 24 UNEF)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.9 lbs (2.2 kg)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Seastar","offers":[{"title":"Default Title","offer_id":52023819436213,"sku":"QBP584320","price":767.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1228747_qbp584320.jpg?v=1763259005"},{"product_id":"qbp852692","title":"Seastar - PA1200-2 Power Assist Unit - 12\/24v 15' Harness","description":"\u003ch4\u003eEffortless Steering for High-Powered Marine Engines\u003c\/h4\u003e\u003cp\u003eThe \u003cstrong\u003eDometic SeaStar PA1200-2 Power Assist Unit\u003c\/strong\u003e revolutionizes marine steering by providing a smoother and more effortless experience, even for larger boats with powerful outboard engines. Designed to accommodate vessels with \u003cstrong\u003e200 HP and above\u003c\/strong\u003e, this advanced system enhances maneuverability, allowing for precision control with minimal effort. Whether navigating tight spaces or cruising at high speeds, the \u003cstrong\u003eSeaStar Power Assist\u003c\/strong\u003e ensures an automotive-like steering feel, making boating more enjoyable and less physically demanding.\u003c\/p\u003e\u003ch4\u003eAdvanced Hydraulic Steering System\u003c\/h4\u003e\u003cp\u003eThis power assist unit operates through a dual-circuit system:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual System\u003c\/strong\u003e – Features a \u003cstrong\u003ehelm pump\u003c\/strong\u003e with internal relief and check valves, along with a built-in reservoir to ensure reliability and smooth operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower System\u003c\/strong\u003e – Incorporates an \u003cstrong\u003eelectronically controlled hydraulic pump\u003c\/strong\u003e that enhances the force applied to the steering cylinder, significantly reducing the effort needed to turn the wheel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBy integrating these two systems, the \u003cstrong\u003eSeaStar Power Assist\u003c\/strong\u003e delivers a seamless and responsive steering experience, ideal for handling high-performance boats with ease.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Compatibility:\u003c\/strong\u003e 12V \/ 24V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness Length:\u003c\/strong\u003e 15 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended for:\u003c\/strong\u003e Boats with 200 HP and above\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic System:\u003c\/strong\u003e Electronically controlled pump for enhanced steering response\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for High-Powered Boats\u003c\/strong\u003e – Ideal for vessels with \u003cstrong\u003e200 HP and above\u003c\/strong\u003e for smooth and precise steering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Assist\u003c\/strong\u003e – Reduces steering effort, providing a car-like feel at the helm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable Dual-Circuit System\u003c\/strong\u003e – Combines manual control with electronic assistance for optimal performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable and Efficient\u003c\/strong\u003e – Engineered for long-lasting marine use, handling the demands of powerful outboard engines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation\u003c\/strong\u003e – Comes with a \u003cstrong\u003e15-foot harness\u003c\/strong\u003e, making setup straightforward and hassle-free.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis \u003cstrong\u003epower assist unit\u003c\/strong\u003e is a game-changer for those looking to upgrade their marine steering system, ensuring effortless handling and a superior boating experience.\u003c\/p\u003e","brand":"Seastar","offers":[{"title":"Default Title","offer_id":52023819468981,"sku":"QBP852692","price":2694.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1228748_qbp852692.jpg?v=1763259006"},{"product_id":"qbp721720","title":"Seastar - PRO PA1315-2 Power Assist Unit - 12\/24V, 15' Harness","description":"\u003ch4\u003eEffortless Steering with the SeaStar PRO PA1315-2 Power Assist Unit\u003c\/h4\u003e\u003cp\u003eThe \u003cstrong\u003eDometic SeaStar PA1315-2 Power Assist Pro\u003c\/strong\u003e transforms marine steering, significantly reducing steering effort for a smoother and more responsive experience. Designed specifically for high-torque, single-engine outboard applications, this unit is ideal for performance bass boats and other vessels equipped with SeaStar Pro helms. Whether installed as part of a new SeaStar steering system or retrofitted to an existing setup, the Power Assist unit enhances control and maneuverability with ease.\u003c\/p\u003e\u003cp\u003eBy incorporating an electronically controlled hydraulic pump, the system provides on-demand power steering, ensuring optimal performance for various boat configurations, including multiple engines, multiple steering stations, and autopilot systems. Even in the event of a power failure, the system seamlessly returns to manual operation, maintaining consistent handling without altering the lock-to-lock turns.\u003c\/p\u003e\u003ch4\u003eAdvanced Steering Technology for Superior Performance\u003c\/h4\u003e\u003cp\u003eThe \u003cstrong\u003eSeaStar Power Assist Unit\u003c\/strong\u003e is engineered to improve steering comfort and precision. The electronic power assist pump integrates smoothly into the hydraulic steering circuit, positioned between the helm and the steering cylinder, and is powered directly by the boat’s battery. The system is designed to automatically adjust to 12V or 24V input voltage, allowing for flexible installation and reliable operation.\u003c\/p\u003e\u003ch4\u003eEasy Installation and Versatile Mounting Options\u003c\/h4\u003e\u003cp\u003eDesigned for hassle-free setup, the unit is compatible with most boat types and steering configurations. It can be mounted on either a \u003cstrong\u003ewall or floor\u003c\/strong\u003e, offering installation flexibility to suit different vessel layouts.\u003c\/p\u003e\u003ch4\u003eKey Features and Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduces Steering Effort\u003c\/strong\u003e – Enjoy a significantly lighter and more responsive helm for better handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Autopilot Systems\u003c\/strong\u003e – Enhances integration with autopilot setups for effortless navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Voltage Operation\u003c\/strong\u003e – Works with both \u003cstrong\u003e12V and 24V\u003c\/strong\u003e power sources, automatically adjusting as needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual Override in Case of Power Loss\u003c\/strong\u003e – Ensures continued steering functionality even if the power assist system is disabled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Installation\u003c\/strong\u003e – Can be \u003cstrong\u003ewall or floor-mounted\u003c\/strong\u003e to fit different boat layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Retrofit Option\u003c\/strong\u003e – Seamlessly integrates into new or existing SeaStar hydraulic steering systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cp\u003eIncludes a \u003cstrong\u003e15-foot wiring harness\u003c\/strong\u003e, providing ample reach for various boat sizes and layouts.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eSeaStar PRO PA1315-2 Power Assist Unit\u003c\/strong\u003e is a must-have upgrade for boaters looking to improve their steering experience with precision, comfort, and reliability. Whether navigating at high speeds or making tight maneuvers, this system ensures smooth and effortless control at all times.\u003c\/p\u003e","brand":"Seastar","offers":[{"title":"Default Title","offer_id":52023819501749,"sku":"QBP721720","price":2848.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1228749_qbp721720.jpg?v=1763259007"},{"product_id":"qbp648630","title":"Seastar - PA6010 Power Assist Autopilot Pump T1 12V","description":"\u003ch4\u003eEffortless Power Steering with Seamless Autopilot Integration\u003c\/h4\u003e\u003cp\u003eThe \u003cstrong\u003eSeastar PA6010 Power Assist Autopilot Pump\u003c\/strong\u003e revolutionizes marine steering by transforming manual hydraulic systems into effortless power steering. Designed for seamless integration, this system significantly reduces steering wheel torque, making navigation smoother and more responsive. Ideal for both OEM installations and retrofitting, it eliminates the need for complex system modifications, ensuring a hassle-free upgrade. Compatible with autopilot systems, the PA6010 enhances precision and control while maintaining a quiet, low-vibration operation.\u003c\/p\u003e\u003ch4\u003eReliable and Efficient Performance\u003c\/h4\u003e\u003cp\u003eThis power assist pump combines the standard SeaStar power assist technology with an integrated Type 1 autopilot pump. Utilizing an internal hydraulic gear pump, it delivers consistent, fixed-flow performance with minimal noise. Engineered for durability and compliance with ABYC, CE, NMMA, and ISO 10592 standards, this pump guarantees reliable operation in demanding marine environments.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e Compatible with standard SeaStar hoses (HO51xx series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil Compatibility:\u003c\/strong\u003e SeaStar Steering Fluid (MIL 5606)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutopilot Pump Flow Rate:\u003c\/strong\u003e 60 in³\/min (no load)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pressure:\u003c\/strong\u003e 1000 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 4 – 8 amps (varies by application)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Cylinder Capacity:\u003c\/strong\u003e 4.9 in³ – 12.5 in³\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eKey Benefits and Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutopilot-Ready:\u003c\/strong\u003e No need to modify the system for installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Steering Conversion:\u003c\/strong\u003e Converts manual hydraulic steering into power-assisted steering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffortless Control:\u003c\/strong\u003e Dramatic reduction in steering wheel torque.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e Simple integration into existing SeaStar systems (1.4 – 2.4 helm pumps).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Works with power purge systems and replaces 12V \u0026amp; 24V systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Durability:\u003c\/strong\u003e Meets SAE J-1171 ignition protection standards for safety.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Noise \u0026amp; Vibration:\u003c\/strong\u003e Internal hydraulic gear pump ensures quiet operation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seastar","offers":[{"title":"Default Title","offer_id":52023819534517,"sku":"QBP648630","price":3483.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1228750_qbp648630.jpg?v=1763259007"},{"product_id":"qbp694364","title":"Seastar - PA6020 Power Assist Autopilot Pump T2 - 12V","description":"\u003ch4\u003eSeamless Power Steering and Autopilot Integration\u003c\/h4\u003e\u003cp\u003eThe \u003cstrong\u003eSeaStar PA6020 Power Assist Autopilot Pump\u003c\/strong\u003e revolutionizes hydraulic steering by providing effortless power steering and a built-in autopilot pump. Designed to seamlessly integrate with existing SeaStar hydraulic steering systems, this unit dramatically reduces steering wheel torque, enhancing maneuverability and control. With a straightforward installation process, it is an ideal solution for both OEM and retrofit applications.\u003c\/p\u003e\u003cp\u003eEngineered for reliability and ease of use, this power assist pump is ignition-protected and meets ABYC, CE, NMMA, and ISO 10592 standards, ensuring durability and compliance with marine industry regulations. Whether upgrading an existing system or installing a new one, the SeaStar PA6020 simplifies the transition to power-assisted steering while enabling autopilot functionality.\u003c\/p\u003e\u003ch4\u003eAdvanced Hydraulic Power and Efficiency\u003c\/h4\u003e\u003cp\u003eThe SeaStar Power Assist Autopilot Pump is built with an internal hydraulic gear pump, designed to operate with minimal vibration and noise. The fixed-flow, reversible pump set is optimized for smooth performance, providing consistent and efficient hydraulic flow. Compatible with the power purge system, it enhances installation efficiency while maintaining a high level of reliability.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings:\u003c\/strong\u003e Compatible with standard SeaStar Hoses (HO51xx, etc.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil Compatibility:\u003c\/strong\u003e SeaStar Steering Fluid (MIL 5606)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutopilot Pump Flow Rate:\u003c\/strong\u003e 60 in³\/min (no load)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pressure:\u003c\/strong\u003e 1000 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical Current Draw:\u003c\/strong\u003e 5 - 11 amps (depending on application)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Cylinder Capacity:\u003c\/strong\u003e 12.5 in³ – 21 in³\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eKey Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffortless Steering Control\u003c\/strong\u003e – Converts manual hydraulic steering to power-assisted steering, significantly reducing steering effort.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutopilot Ready\u003c\/strong\u003e – No need for additional installations; integrates directly into an autopilot system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth and Quiet Operation\u003c\/strong\u003e – Internal hydraulic gear pump ensures minimal vibration and noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple Installation\u003c\/strong\u003e – Can be easily added to existing SeaStar manual steering systems (helm pumps from 1.4 – 2.4).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable and Compliant\u003c\/strong\u003e – Certified to ABYC, CE, NMMA, and ISO 10592 standards for marine safety and performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Fit\u003c\/strong\u003e – Suitable for OEM installations or retrofitting into existing hydraulic systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protected\u003c\/strong\u003e – SAE J-1171 compliant for added safety in marine environments.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seastar","offers":[{"title":"Default Title","offer_id":52023819567285,"sku":"QBP694364","price":3522.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1228752_qbp694364.jpg?v=1763259008"},{"product_id":"qbp638004","title":"Garmin Class B Compact Drive Unit, For GHP 12, 10 in Stroke, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12029-00 is a Class B compact drive unit that pairs with the GHP 12 autopilot system to push and pull a sailboat steering linkage from below deck. It is sized for sailboats up to 48,400 lb (24.2 t) of displacement, with a 254 mm (10 in.) stroke and up to 6,900 N (1,551 lbf) of operating thrust at maximum load (intermittent).\u003c\/p\u003e\u003cp\u003ePower is supplied as 12 Vdc regulated by the autopilot, and the unit is rated IP67 for water ingress. Even with that sealing, it belongs in an under-deck location that stays dry and is not exposed to flooding or washdown, where the mounting structure can handle the high thrust loads generated at the rudder.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConnects to the GHP 12 autopilot system to drive sailboat steering through a quadrant or tiller arm.\u003c\/li\u003e\n\u003cli\u003eFor sailboats up to 48,400 lb (24.2 t) displacement.\u003c\/li\u003e\n\u003cli\u003e254 mm (10 in.) stroke; up to 6,900 N (1,551 lbf) operating thrust at max load (intermittent duty).\u003c\/li\u003e\n\u003cli\u003e12 Vdc input (regulated by the autopilot); up to 25 A peak current at max load (12.5 A current rating at 100% duty).\u003c\/li\u003e\n\u003cli\u003eIP67 water-ingress protection; intended for an under-deck mounting area not subject to flooding or washdown.\u003c\/li\u003e\n\u003cli\u003eRequires physical end stops and must stay within the 10 degree tilt limit at the extremes of stroke to avoid damage.\u003c\/li\u003e\n\u003cli\u003e9 kg (19.84 lb) weight; EMC protection to BS EN 60945:2002 (DC) and ignition protection to BS EN 8864:1990.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe drive unit can be linked to an existing steering quadrant or to a tiller arm (not included). The supplied tiller bolt hardware fits a quadrant or tiller arm thickness of 12 to 16 mm (0.47 to 0.63 in.). The actuator travel must be limited by physical end stops so total movement does not exceed 254 mm (10 in.) from fully retracted to fully extended.\u003c\/p\u003e\u003cp\u003eBefore drilling or bolting anything down, cycle the linkage through the full rudder range and confirm the rod and body never contact the vessel structure, quadrant, or tiller arm. Keep it away from strong magnetic sources; a typical marine speaker should be at least 20 cm (8 in.) from the drive unit.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the base on a solid surface that can take the steering loads. Supplied M8 fasteners are suited for mounting surfaces 12 to 24 mm (0.47 to 0.95 in.) thick. The four mounting holes are spaced 76.2 mm (3 in.) apart and use 8.8 mm (0.35 in.) holes; mounting bolts are tightened to 17 Nm (12.5 ft-lbf).\u003c\/p\u003e\u003cp\u003eOperating temperature limits are -15 to 50 C (5 to 122 F), with a normal operating range of 5 to 35 C (41 to 95 F). Plan the linkage geometry so tilt at the extremes of stroke stays within 10 degrees above or below center.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis drive unit is powered at 12 Vdc (regulated by the autopilot). Allow for up to 12.5 A at 100% duty and up to 25 A peak current at maximum load when sizing the GHP 12 power feed and connections. The attached cables should remain uncut so the drive unit can be connected as intended within the autopilot system.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eClass B compact drive unit\u003c\/li\u003e\n\u003cli\u003eM8 mounting bolts, washers, and nuts for the base\u003c\/li\u003e\n\u003cli\u003eTiller bolt hardware, including M12 washers, M12 lock nut, and locking pin\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eInspect mounting and tiller-bolt hardware regularly and tighten if needed. Keep the cylinder rod free of nicks, and keep the rod end and tiller bolt lubricated with marine-grade grease that is compatible with nitrile seals. Avoid exposing the drive unit to salt water.\u003c\/p\u003e\u003ch6\u003eSafety notice\u003c\/h6\u003e\u003cp\u003eCalifornia Proposition 65 warning: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis drive unit is a good fit for cruising and performance sailboats that have, or can add, a below-deck quadrant or tiller arm connection point and need an actuator that supports up to 48,400 lb of displacement when paired with a GHP 12 autopilot. It works best in an under-deck space that stays dry, where linkage geometry can be set up with proper end stops and clear travel.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269076545717,"sku":"QBP638004","price":2099.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298943_qbp638004.jpg?v=1771541732"},{"product_id":"qbp778930","title":"Garmin 2-Liter Hydraulic Pump Kit, For Reactor 40, 2.0 LPM","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-00705-63 is a 2.0 L per minute (0.53 gpm) hydraulic pump kit for Garmin autopilot systems, used with a Reactor 40 setup to move hydraulic fluid to your steering cylinder. The pump assembly measures 31.75 x 11.43 x 10.16 cm (12.5 x 4.5 x 4 in.) and weighs 3.2 kg (7.05 lb), which helps when you are checking clearance in a console, steering locker, or under-helm space.\u003c\/p\u003e\u003cp\u003eOn a boat, this pump is plumbed into the port, starboard, and return lines so the autopilot can steer by pushing fluid to either side of the cylinder. It needs a dry mounting location protected from spray and weather, with room to reach the hydraulic fittings and service points.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2.0 L\/min (0.53 gpm) hydraulic output for steering-cylinder control in a Reactor 40 autopilot installation\u003c\/li\u003e\n\u003cli\u003eORB hydraulic ports and threaded cable collars on the pump assembly\u003c\/li\u003e\n\u003cli\u003eMounts horizontally when possible; vertical mounting is acceptable with the pump head connectors facing up\u003c\/li\u003e\n\u003cli\u003ePlacement guidance: keep the pump within 0.5 m (19 in.) of the ECU; the pump-to-ECU cables cannot be extended\u003c\/li\u003e\n\u003cli\u003eThree built-in shutoff valves isolate the pump for troubleshooting and service without disconnecting hydraulic lines\u003c\/li\u003e\n\u003cli\u003eHydraulic hose guidance: -4 (6 mm \/ 1\/4 in.) ID or larger hose with a minimum 1000 psi rating\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -10 to 60 C (14 to 140 F)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis pump is intended for use only with Garmin autopilot systems. It must not be installed on a steering system with an unvented reservoir, and it is not for use on a system with an unbalanced cylinder. If you are unsure whether your reservoir is vented, the vent is typically in the filler cap of the highest helm.\u003c\/p\u003e\u003cp\u003ePlan your plumbing around port, starboard, and return connections at the pump manifold. For ORB and other O-ring style fittings, thread sealant is not used. For fittings without an O-ring, use a liquid thread sealant intended for hydraulic service. Thread seal tape should not be used in this hydraulic system.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the pump where you can keep hose runs sensible and still access the fittings. A common layout uses T-connectors in the port and starboard lines between the helm and the cylinder, plus a return line connection to the center pump fitting. It is best to place the pump near the cylinder so no more than 3 m (10 ft.) of hose connects the pump to the cylinder.\u003c\/p\u003e\u003cp\u003eThe pump connects to the ECU using the two included cables, which plug into the ECU ports marked DRIVE and FEEDBACK. Hydraulic hoses, tees, and any additional fittings beyond the included adapters are not part of this kit, so confirm your steering hose and fitting plan before you start.\u003c\/p\u003e\u003ch6\u003eMaterials and corrosion resistance\u003c\/h6\u003e\u003cp\u003eThe manifold is aluminum alloy, and the pump body is zinc alloy with a hardened steel piston\/rotor. In salt air, a light coat of marine corrosion inhibitor on the pump body and manifold helps limit surface corrosion, and reapplying it once a year is a sensible routine for boats that see regular washdowns and humid lockers.\u003c\/p\u003e\u003ch6\u003eOn-board behavior\u003c\/h6\u003e\u003cp\u003eIn standby, the pump allows a gradual bleed-down of pressure. On boats with uneven rudder loads, that can show up as a slow drift to one side without continuous manual corrections. A check valve accessory can be added to block the bleed-down path through the autopilot pump during manual steering.\u003c\/p\u003e\u003cp\u003eThis kit is a good match when you are building out a Reactor 40 hydraulic autopilot system on a boat that already has hydraulic steering and you want a 2.0 L\/min pump option with service-friendly shutoff valves.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePump assembly\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003e3 x ORB-5 to 3\/8 in. compression marine tube fittings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269300252853,"sku":"QBP778930","price":1159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299147_qbp778930.jpg?v=1771543135"},{"product_id":"qbp128528","title":"Garmin Reactor 40 Autopilot Pump Kit, 1.2 LPM, 6-14 cu in Cylinder Volume","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-00705-64 is a 1.2 liter per minute hydraulic autopilot pump kit that drives the steering on compatible Garmin autopilot systems, including Reactor 40 installations. It moves hydraulic fluid through the steering lines at up to 1.2 L\/min (0.32 gal\/min), and the pump footprint is about 12.5 x 4.5 x 4.0 in (31.8 x 11.4 x 10.2 cm) for planning space.\u003c\/p\u003e\u003cp\u003eThis pump is commonly matched to balanced-cylinder hydraulic steering, and the steering system must have a vented reservoir. It is often used on single-cylinder setups in the 6 to 14 cubic inch total cylinder volume range, where the flow rate keeps steering response steady without oversizing the pump.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1.2 L\/min (0.32 gal\/min) flow rate for hydraulic steering control with compatible Garmin autopilot systems\u003c\/li\u003e\n\u003cli\u003eORB hydraulic ports and threaded cable collars for a secure hydraulic and electrical connection at the pump\u003c\/li\u003e\n\u003cli\u003eORB -5 manifold connections with included ORB-5 to 3\/8 in compression tube fittings for common marine tube runs\u003c\/li\u003e\n\u003cli\u003ePhysical size of about 12.5 x 4.5 x 4.0 in (31.8 x 11.4 x 10.2 cm) to help confirm mounting clearance\u003c\/li\u003e\n\u003cli\u003ePump-to-ECU cabling is fixed-length and the pump must be mounted within 19 in (0.5 m) of the ECU\u003c\/li\u003e\n\u003cli\u003eHydraulic connections use -4 (6 mm \/ 1\/4 in ID) hose or larger, with hose and fittings rated for at least 1000 psi (6,895 kPa)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePump assembly\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003cli\u003eInstallation mounting hardware\u003c\/li\u003e\n\u003cli\u003eThree ORB-5 to 3\/8 in compression marine tube fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis pump is for hydraulic steering systems and must be used with Garmin autopilot systems that support the 1.2 L pump drive. Confirm your steering cylinder type and total cylinder volume before purchase, and make sure your system has a vented reservoir at the helm or reservoir cap.\u003c\/p\u003e\u003cp\u003eThis pump is not intended for unbalanced-cylinder steering systems. If you are unsure whether your cylinder is balanced or whether your reservoir is vented, verify those details on the boat before installation.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting location first. The pump needs a place that stays dry and is protected from water and weather, and it must sit within 19 in (0.5 m) of the ECU because the pump cables cannot be extended.\u003c\/p\u003e\u003cp\u003eMount the pump horizontally when possible. If you must mount it vertically, the pump head connectors should face up. Keep the pump close to the steering cylinder so the hose run from the pump to the cylinder is no longer than 10 ft (3 m), and use -4 (6 mm \/ 1\/4 in ID) hose or larger throughout the installation, including the return line.\u003c\/p\u003e\u003cp\u003eFor fittings that seal with an O-ring such as ORB and ORFS, do not use thread sealant. For fittings without an O-ring, use a liquid thread sealant and allow proper cure time. Avoid thread seal tape or putty on hydraulic connections to keep debris out of valves.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eOnce installed and bled, the pump becomes the hydraulic muscle behind the autopilot, turning course corrections into smooth cylinder movement at the helm. It is a good match for owners setting up a Reactor 40 autopilot on a mid-size boat with single-cylinder hydraulic steering who want consistent steering response during coastal runs, long transits, and hands-on fishing days where steady heading control matters.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter installation, a light application of marine corrosion inhibitor on the pump body and manifold helps resist corrosion in damp lockers and engine-room environments. Recheck hydraulic fittings for seepage after the first few outings and anytime the system has been opened for service.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269300285621,"sku":"QBP128528","price":1159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299148_qbp128528.jpg?v=1771543137"},{"product_id":"qbp905681","title":"Garmin GHP SmartPump v2 Hydraulic Autopilot Steering Pump, 10-30V DC, For 4-24 cu in Cylinders","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-00705-62 is a GHP SmartPump v2 hydraulic autopilot pump that ties into a boat's hydraulic steering system. It supports steering cylinder sizes from 4 to 24 cubic inches, with a configurable flow rate up to 2.4 L per minute so the steering response can be set for the boat.\u003c\/p\u003e\u003cp\u003eIn practice, it is the pump that moves the cylinder port and starboard under autopilot commands, while your helm and steering gear remain the foundation of the system. The unit is rated for operation from -15°C to 55°C (5°F to 131°F), which matters when the pump is mounted in a console, lazarette, or mechanical space that sees real temperature swings.\u003c\/p\u003e\u003cp\u003eCorrosion resistance is handled with black-dyed aluminum parts and nickel-plated steel components, which helps in damp lockers and salt-air environments where unprotected hardware tends to show rust fast.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConfigurable flow rate up to 2.4 L per minute to tune steering response\u003c\/li\u003e\n\u003cli\u003eCompatible with steering cylinder sizes from 4 to 24 cubic inches\u003c\/li\u003e\n\u003cli\u003eBroad application range so you are not locked into a narrow pump size window\u003c\/li\u003e\n\u003cli\u003eColor-coded connectors to keep wiring straightforward during installation and service\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant construction with black-dyed aluminum parts and nickel-plated steel components\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -15°C to 55°C (5°F to 131°F)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis pump is intended for hydraulically steered boats where the steering cylinder volume falls within the 4 to 24 cubic inch range. If your steering setup includes dual helms, power-assist modules, or other add-ons, plan the mounting location and hose routing so the pump can be integrated cleanly and still remain serviceable.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the unit where it stays accessible for hose connections, electrical plugs, and future service, and where it will not sit in bilge water. Keep hydraulic runs supported to reduce vibration wear, and bleed the steering system thoroughly after plumbing so the autopilot response stays consistent.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eRoute the harness away from sharp edges and moving parts, add chafe protection where it passes through bulkheads, and seal connections against spray. The color-coded connectors help reduce mix-ups when you are working in tight spaces or returning to the install later for maintenance.\u003c\/p\u003e\u003ch6\u003eOn-board use\u003c\/h6\u003e\u003cp\u003eThis setup is a good match for boaters who want an autopilot pump that covers a wide range of common hydraulic cylinder sizes without swapping to a different pump model. It fits well on boats used for long coastal runs, offshore transits, and everyday cruising where reducing helm workload makes a difference.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269470613685,"sku":"QBP905681","price":2799.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300106_qbp905681.jpg?v=1771544108"},{"product_id":"qbp930649","title":"Simrad SteadySteer Flow Switch, For RPU80\/RPU160 Pumps, For NAC-2\/NAC-3 Autopilot Computers, AP44\/IS42\/AP48 Controllers","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad 000-15734-001 is a SteadySteer flow switch that lets you take the helm through a turn while your autopilot stays armed, then resumes on the new heading once you are back on a straight leg. It plumbs inline in a hydraulic steering line with 1\/4 in NPT female ports on both sides and includes a 3 m (10 ft) cable for routing back to the autopilot computer.\u003c\/p\u003e\u003cp\u003eOn boats where you are constantly making small course changes, this keeps your eyes outside instead of on the controller. Turn the wheel to steer manually, then let the system settle and reengage without button presses or alarms.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eInstant manual helm override for hydraulic autopilot steering: turn the wheel to take control, then autopilot reengages after the new heading is established\u003c\/li\u003e\n\u003cli\u003eCompatible with Simrad NAC-2 and NAC-3 autopilot computers running software 1.1.01.00 or newer\u003c\/li\u003e\n\u003cli\u003eSupports AP44, IS42, and AP48 controllers running software 57.3.163 or newer\u003c\/li\u003e\n\u003cli\u003eCompatible with Simrad multifunction displays running software 20.2 or newer\u003c\/li\u003e\n\u003cli\u003eInline hydraulic installation with 1\/4 in NPT female ports on both sides\u003c\/li\u003e\n\u003cli\u003eMay be installed on either port or starboard hydraulic line; mount horizontally and keep a hydraulic hose between the helm and the switch\u003c\/li\u003e\n\u003cli\u003e3 m (10 ft) cable length for flexible mounting locations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis flow switch is intended for hydraulic steering systems using older RPU-series autopilot pumps. Confirm your steering lines and adapters match the 1\/4 in NPT female ports, and plan a mounting spot where the body can be installed in-line without putting strain on the hose fittings.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the unit horizontally in the hydraulic line and avoid mounting it directly on the helm; a short hydraulic hose should sit between the helm and the flow switch. Keep it at least 60 cm (2 ft) away from strong magnetic influences such as engines and other large ferrous components.\u003c\/p\u003e\u003cp\u003eAfter wiring, enable the SteadySteer function in your autopilot setup so the computer knows to use the flow signal for the automatic disengage and reengage behavior.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for cruising and fishing boats that spend long stretches on autopilot but still need quick hand steering around traffic, channel bends, or docks. It also suits operators who want course changes without reaching for a keypad while the boat is moving.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eSteadySteer flow switch\u003c\/li\u003e\u003c\/ul\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":52269684687029,"sku":"QBP930649","price":519.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301003_qbp930649.jpg?v=1771545235"},{"product_id":"qbp816267","title":"Simrad Pump-2 MK2 Reversible Hydraulic Autopilot Pump, 12V, 0.8L\/min, For 80-250 cc Cylinders","description":"\u003ch4\u003eIntroducing the Pulse of the Ocean: Pump-2 MK2 Reversible Hydraulic Pump\u003c\/h4\u003e \u003cp\u003eUnveiling a marine marvel, the Pump-2 MK2 Reversible Hydraulic Pump, meticulously designed to be the driving force behind the SteadySteer technology. Whether cruising through tranquil waters or navigating through stormy seas, this pump ensures a steadfast helm experience.\u003c\/p\u003e \u003ch4\u003eTechnical Tidbits\u003c\/h4\u003e \u003cp\u003eThe Pump-2 MK2 is tailored for cylinder displacements ranging between 80 cc to 250 cc (4.9 - 15.2 cu. in), ensuring a wide array of compatibility. Its O-Ring Boss (ORB) connections only add to the finesse, accompanied by three ORB-5 to 9\/16 UNF fittings that promise a snug fit and unfaltering performance. This pump stands as a crucial component, seamlessly integrating with SteadySteer technology (with a requisite of NAC-2 \/ AC12) to provide a smoother and more controlled steering experience.\u003c\/p\u003e \u003ch4\u003eDimensions of Durability\u003c\/h4\u003e \u003cp\u003eThe robust construction of the Pump-2 MK2 encapsulates the quintessence of marine engineering, maintaining a compact form while promising enduring functionality. The detailed dimensions further endorse its adaptability and readiness to be the heart of your steering system.\u003c\/p\u003e \u003ch4\u003eHighlights of the Horizon\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eExceptional compatibility with cylinder displacements of 80 cc - 250 cc (4.9 - 15.2 cu. in).\u003c\/li\u003e \u003cli\u003eImmaculate O-Ring Boss (ORB) connections augmented with 3 x ORB-5 to 9\/16 UNF fittings for a secure assembly.\u003c\/li\u003e \u003cli\u003eIntegral part of the SteadySteer ecosystem (NAC-2 \/ AC12 required) ensuring a smoother sailing experience.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":52269697433781,"sku":"QBP816267","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299882_qbp816267.jpg?v=1771545292"},{"product_id":"qbp280135","title":"Simrad Pump-3 Hydraulic Autopilot Pump, For NAC-3\/AC42, 12V, 160-550 cc Cylinders, 1.6L\/min, Reversible","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad 000-15445-002 is a Pump-3 MK2 reversible hydraulic autopilot pump for 12V DC steering systems, rated at 1.6 L\/min (98 cu in\/min) and intended for hydraulic cylinders in the 160 to 550 cc range.\u003c\/p\u003e\u003cp\u003eIt sits between the autopilot computer and your hydraulic steering circuit, pushing fluid in either direction to drive the cylinder when you engage autopilot steering. It is commonly used on boats up to about 50 ft when paired with a compatible Simrad autopilot computer.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12V DC reversible hydraulic gear pump for autopilot steering control\u003c\/li\u003e\n\u003cli\u003eFlow rate: 1.6 L\/min (98 cu in\/min) for responsive course corrections on mid-size hydraulic systems\u003c\/li\u003e\n\u003cli\u003eSupports cylinder displacement from 160 to 550 cc (9.8 to 33.5 cu in)\u003c\/li\u003e\n\u003cli\u003eO-Ring Boss (ORB) ports for clean, leak-resistant hydraulic connections\u003c\/li\u003e\n\u003cli\u003eIncludes 3 x ORB-5 to 9\/16 UNF fittings for common marine steering plumbing\u003c\/li\u003e\n\u003cli\u003eWorks with Simrad NAC-3 or AC42 autopilot computers and supports SteadySteer setups\u003c\/li\u003e\n\u003cli\u003eSpecified for installations on boats up to 50 ft when the full steering and autopilot system is correctly sized\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMatch the pump to your steering cylinder displacement before ordering. This unit is sized for cylinders between 160 and 550 cc, which covers many hydraulic rams found on larger outboards, stern drives, and inboard boats.\u003c\/p\u003e\u003cp\u003eThis pump is one part of a complete autopilot system and requires a compatible Simrad autopilot computer (NAC-3 or AC42) to control direction and operation. It is not a standalone steering component.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the pump in a dry location with airflow and access for service, then keep hydraulic runs as short as practical to help steering response and simplify bleeding. Avoid placing it where it will see constant spray, bilge water, or direct engine heat.\u003c\/p\u003e\u003cp\u003eThe hydraulic ports use ORB sealing, so the seal is made at the O-ring rather than on the threads. Keep O-rings clean, start fittings by hand to avoid cross-threading, and tighten evenly.\u003c\/p\u003e\u003cp\u003eAfter plumbing, bleed the steering circuit completely and confirm there are no leaks under load before relying on the autopilot away from the dock.\u003c\/p\u003e\u003ch6\u003eOn-board use\u003c\/h6\u003e\u003cp\u003eThis pump is a common match for coastal cruising and sportfishing boats with hydraulic steering that need autopilot control for long runs, trolling, or holding a steady course in chop. It also fits larger center consoles and small to mid-size cruisers that fall within the listed cylinder range and boat-size guidance.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePUMP-3 MK2 reversible hydraulic pump (12V)\u003c\/li\u003e\n\u003cli\u003e3 x ORB-5 to 9\/16 UNF fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRecheck hydraulic fittings after the first few outings and inspect periodically for seepage. Keep the pump body and electrical connections free of salt buildup, and address hose or cable chafe early so small rub points do not turn into leaks.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":52269698154677,"sku":"QBP280135","price":1175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299883_qbp280135.jpg?v=1771545293"},{"product_id":"qbp738543","title":"Simrad PUMP-4 MKII Reversible Hydraulic Autopilot Pump, For NAC-3\/AC42, 12V, 3.0 L\/min, 290-960 cc Cylinder Displacement","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad 000-15446-002 is a 12V reversible hydraulic gear pump used as the drive unit in a Simrad autopilot system for balanced hydraulic steering cylinders. It moves 3.0 L per minute (183 cu in\/min) and matches cylinder displacements from 290 to 960 cc (17.7 to 58.5 cu in), which covers many mid to larger hydraulic steering rams.\u003c\/p\u003e\u003cp\u003eThis pump is used with NAC-3 or AC42 autopilot computers and supports SteadySteer. On most installations it is placed below the helm pump and plumbed into the two main steering lines, with the center port tied into the steering reservoir balance line.\u003c\/p\u003e\u003cp\u003eIt is a good match for boats up to about 70 ft that run a 12V electrical system and need a 3.0 LPM pump size to keep hard-over steering time in a normal range.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12V reversible hydraulic gear pump with nominal flow of 3.0 L\/min (183 cu in\/min)\u003c\/li\u003e\n\u003cli\u003eWorks with balanced cylinders in the 290 to 960 cc (17.7 to 58.5 cu in) range\u003c\/li\u003e\n\u003cli\u003eO-Ring Boss ports with 1\/2-20 SAE (-05 ORB) female threads on the pump body\u003c\/li\u003e\n\u003cli\u003eIncludes three straight adapters: -05 ORB to 9\/16-24 (3\/8 tube style) for common hose and tube ends\u003c\/li\u003e\n\u003cli\u003eIntegral lock valves help hold rudder load when the pump is not running\u003c\/li\u003e\n\u003cli\u003eTypical current draw 10 to 20 A, with peak around 30 A under load for wiring and breaker planning\u003c\/li\u003e\n\u003cli\u003eOverall length about 214 mm for mounting and service clearance planning\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis pump is intended to be driven by Simrad NAC-3 or AC42 course computers and is sized for hydraulic steering systems that use a balanced cylinder. Confirm your steering cylinder displacement falls within 290 to 960 cc, and verify your autopilot computer and boat supply are 12V.\u003c\/p\u003e\u003cp\u003eHydraulic connections are ORB style, so match your hose ends or adapters to -05 ORB on the pump side. The two outer ports connect into the port and starboard steering lines, and the middle port connects to the steering reservoir balance line.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the pump lower than the helm pump so it stays primed, and route the reservoir hose upward to the helm reservoir connection without dips that can trap air. The pump can be mounted in any orientation as long as the plumbing is supported and protected from chafe.\u003c\/p\u003e\u003cp\u003eWhen installing ORB fittings, keep threads clean, lubricate the O-ring with hydraulic oil, and tighten to the specified torque. After plumbing and wiring are complete, bleed the steering system thoroughly until steering response feels firm and consistent.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eWire the pump directly to the autopilot course computer pump outputs, using cable sized for voltage drop and the pump load. A minimum of AWG 8 (10 mm2) is commonly used for this 12V pump class, depending on run length and installation standards.\u003c\/p\u003e\u003cp\u003eKeep all connections above bilge water where possible, support cables to avoid vibration fatigue, and protect the circuit with the correct breaker or fuse as specified by your autopilot computer installation requirements.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePUMP-4 MKII 12V reversible hydraulic pump\u003c\/li\u003e\n\u003cli\u003e3 x -05 ORB to 9\/16-24 straight adapter fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically check all hydraulic fittings for seepage, inspect hoses for chafe, and keep the steering reservoir topped up with the correct hydraulic fluid. If the pump gets louder over time or steering feels spongy, recheck for air in the lines and bleed the system again.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":52269698351285,"sku":"QBP738543","price":1559.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300999_qbp738543.jpg?v=1771545295"},{"product_id":"qbp245549","title":"Simrad PUMP-5 MKII Reversible Hydraulic Autopilot Pump, NAC-3\/AC42 Required, 24V, 3.0 L\/min, For 290-960 cc Cylinder Displacement, SteadySteer Compatible, ORB Connections, Includes 3 ORB-5 to 9\/16 UNF Fittings","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad 000-15447-002 is a 24V DC reversible hydraulic gear pump used as the drive unit in an autopilot system for boats with hydraulic steering. It moves 3.0 L\/min (183 cu in\/min) and is sized for steering cylinders with a total displacement of 290 to 960 cc (17.7 to 58.5 cu in), which puts it in the range commonly seen on larger outboards, inboards, sportfishers, and cruising yachts.\u003c\/p\u003e\u003cp\u003eThis pump is intended to run with Simrad NAC-3 or AC42 autopilot computers and supports SteadySteer when used in that setup. Hydraulic ports use O-Ring Boss (ORB) connections, and the included adaptors make it easier to tie into common 9\/16 UNF hose-end hardware without hunting down fittings before installation.\u003c\/p\u003e\u003cp\u003eIt is a good match for owners rigging a 24V autopilot on a boat up to about 70 ft who want to confirm cylinder size, pump voltage, and autopilot computer compatibility before committing to the drive unit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e24V DC reversing pump for hydraulic autopilot steering systems\u003c\/li\u003e\n\u003cli\u003e3.0 L\/min (183 cu in\/min) output for responsive helm corrections at cruise speeds\u003c\/li\u003e\n\u003cli\u003eSupports 290 to 960 cc (17.7 to 58.5 cu in) cylinder displacement range\u003c\/li\u003e\n\u003cli\u003eWorks with NAC-3 or AC42 autopilot computers as the hydraulic drive\u003c\/li\u003e\n\u003cli\u003eO-Ring Boss (ORB) hydraulic connections on the pump body\u003c\/li\u003e\n\u003cli\u003eSteadySteer compatible when integrated with the required autopilot computer\u003c\/li\u003e\n\u003cli\u003eApplication guidance up to about 70 ft boats (system sizing still depends on steering cylinder displacement)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePUMP-5 MKII 24V reversible hydraulic pump\u003c\/li\u003e\n\u003cli\u003e3 x ORB-5 to 9\/16 UNF fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eTo confirm fit, check your steering cylinder displacement in cc or cubic inches. If your boat has more than one steering cylinder, use the combined displacement when comparing to the 290 to 960 cc (17.7 to 58.5 cu in) range. This pump is for 24V electrical systems; it is not a drop-in choice for 12V boats without changing the system voltage.\u003c\/p\u003e\u003cp\u003eOn the control side, plan on pairing it with a NAC-3 or AC42 autopilot computer. That combination is the expected match for operating the Pump-5 and for SteadySteer support.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the pump in a clean, accessible area where it can be securely fastened and where hydraulic lines can be routed without tight bends or chafe. Keep the pump positioned so the fittings and hoses are easy to inspect, since a small seep is much easier to catch early than after a long run.\u003c\/p\u003e\u003cp\u003eUse the ORB ports and included ORB-5 to 9\/16 UNF adaptors as the connection point into your steering plumbing. After plumbing, bleed the steering system thoroughly and follow the standard autopilot commissioning steps so the computer can learn the drive and steering response.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically check hydraulic connections for weeping, keep the mounting hardware tight, and make sure hoses stay supported so vibration does not work fittings loose over time. If steering feel changes or the autopilot starts hunting more than usual, recheck for air in the system and confirm fluid level and condition.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":52269698744501,"sku":"QBP245549","price":1559.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301001_qbp245549.jpg?v=1771545296"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/autopilot-pumps.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}