{"title":"Accessories","description":"","products":[{"product_id":"qbp193618","title":"Vimar Eikon Tactil Blank Module, 1 Module, Grey, Halogen-Free","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM21041 is a grey blank module for Eikon Tactil cover plates that closes an unused module position and keeps the panel looking finished. It uses halogen-free thermoplastic with an untreated matt surface, is colour-matched to RAL 7024 (similar), and has a device depth of 15.20 mm.\u003c\/p\u003e\u003cp\u003eOn a boat, this is the small part that cleans up an Eikon Tactil switch panel when you leave a spare slot for a future upgrade, remove a device, or need to blank off an opening on a multi-module cover plate. It is non-transparent and includes an information surface for simple identification when you are laying out circuits at the helm or in the cabin.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for Vimar Eikon Tactil modular cover plates as a blanking insert for unused module positions\u003c\/li\u003e\n\u003cli\u003eGrey, matt finish with RAL 7024 (similar) for consistent colour matching across the panel\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic construction with untreated surface finishing\u003c\/li\u003e\n\u003cli\u003eNon-transparent front with an information surface for marking or identification\u003c\/li\u003e\n\u003cli\u003e15.20 mm device depth to help you confirm clearance behind the cover plate\u003c\/li\u003e\n\u003cli\u003eUseful for closing unused module spaces on cover plates with multiple module positions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis blank module is intended for the Eikon Tactil range. If your existing plate and modules are from a different Vimar series, match the series first so the fit and finish stay consistent. It occupies a single module position and is used where there is an empty opening in the cover plate layout.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is the same type of mechanical fit used across the Eikon Tactil modular system. With the cover plate removed, the blank module is placed into the open module position, then the plate is refitted. No wiring or electrical connections are involved because it is a blanking component rather than an electrical device.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis part makes the most sense when you are building an Eikon Tactil panel and want to keep a spare slot available, or when you need to close an unused opening so the panel stays tidy and easier to wipe down. It is also handy during refits when the final device layout is not locked in yet.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eClean with mild soap and water and avoid aggressive solvents that can haze or soften plastics. If the panel is in an exposed location, a quick rinse after salt spray helps keep the finish looking even with the rest of the switchgear.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268884328629,"sku":"QBP193618","price":4.58,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298045_qbp193618.jpg?v=1771540632"},{"product_id":"qbp871337","title":"Vimar Netsafe 110 Connecting Tool, For 110-Type Twisted Cable, RJ\/MT-RJ Compatible","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM03250 is a 110 connecting tool for seating 110 type twisted cable into insulation-piercing terminals used in structured wiring blocks and patch panels.\u003c\/p\u003e\u003cp\u003eIt is suitable for RJ plug terminations, MT-RJ plug terminations, and low-current connectors. Supplied as a single tool, the packaged size is 3.3 x 18.3 x 3.3 cm and the packaged weight is about 128.2 g, which makes it easy to keep in a service kit on board for comms and network work at the nav station or inside a protected tech cabinet.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eUsed to connect 110 type twisted cable to insulation-piercing terminals\u003c\/li\u003e\n\u003cli\u003eSuitable for RJ plug terminations in structured cabling hardware\u003c\/li\u003e\n\u003cli\u003eSuitable for MT-RJ plug terminations\u003c\/li\u003e\n\u003cli\u003eSuitable for low-current connectors\u003c\/li\u003e\n\u003cli\u003eNo cutting device and no strip function, so cable prep and trimming are handled with separate tools\u003c\/li\u003e\n\u003cli\u003eNo interlock device, keeping operation straightforward when seating conductors into IDC terminals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePrepare the cable first by stripping the jacket to the length required by the block or module, then lay each conductor into the correct slot before seating it with the tool. Since there is no cutting or stripping function, keep a clean workflow for trimming and labeling so the termination area stays serviceable.\u003c\/p\u003e\u003cp\u003eOn a vessel, route and secure the cable run so the pair bundle is not pulling against the terminal field. Leave a small service loop in the cabinet and add strain relief where the cable enters the panel area, especially in locations that see vibration underway.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis tool is intended for 110 type twisted-pair terminations that use insulation-piercing contact technology. It is not meant for connector types outside its stated RJ, MT-RJ, and low-current connector use, including formats such as BNC, F-type, D-Sub, or common fiber connector styles like ST, SC, or LC.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe the tool down after use, especially if it has been handled with salty or wet hands, and store it in a dry kit box. If it will live on board long-term, keep it out of direct spray zones and away from bilge humidity.\u003c\/p\u003e\u003ch6\u003eWho it suits\u003c\/h6\u003e\u003cp\u003eA practical fit for anyone building or maintaining structured low-voltage cabling on board, including network and phone runs that land on 110 style insulation-piercing terminals in a sheltered distribution area.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269501939893,"sku":"QBP871337","price":260.06,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300290_qbp871337.jpg?v=1771544303"},{"product_id":"qbp867647","title":"Vimar TV Joint for Coaxial Cable, 75 Ohm, Straight, Ivory Finish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM01650 is a TV coaxial cable joint that links two 75 ohm coax cables in a straight in-line connection, with an ivory finish.\u003c\/p\u003e\u003cp\u003eOn a boat, it is typically used to extend a TV antenna feed, repair a damaged section of coax without replacing the full run, or tidy up a coax connection inside cabinetry, behind a helm panel, or near a TV splitter.\u003c\/p\u003e\u003cp\u003eThis is a signal-cable coupler, not a powered device. It is meant for 75 ohm coax applications, so it should not be used in 50 ohm radio systems.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e75 ohm coaxial cable joint for TV signal cabling\u003c\/li\u003e\n\u003cli\u003eStraight, in-line coupler format for joining two cable ends\u003c\/li\u003e\n\u003cli\u003ePlug\/socket style joint (plug\/bus configuration)\u003c\/li\u003e\n\u003cli\u003eIvory color when the connection is in a visible location\u003c\/li\u003e\n\u003cli\u003eUseful for extending runs or making a clean mid-cable repair in protected interior spaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMatch this joint to 75 ohm coax used for onboard TV and antenna distribution. If your installation uses specific coax connector standards elsewhere in the system, confirm that this joint style matches the cable-end preparation and connection method you are using.\u003c\/p\u003e\u003cp\u003eFor best signal stability, the coax shield should remain continuous through the joint and the connection should be kept secure so vibration does not work the cable loose over time.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the splice point so it stays accessible for inspection and is not sitting in a wet bilge, a deck leak path, or a high-heat area near engines or exhaust. Support the cable on both sides of the joint to remove strain from the connection, and route the run away from sharp edges.\u003c\/p\u003e\u003cp\u003eAfter installation, verify reception at the TV or distribution point before closing panels, especially if the joint is being used as part of a troubleshooting repair.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis joint is a good match for refits where a cabin TV is being moved, a new TV feed is added from an existing splitter, or an older coax run needs a localized repair after chafe. It also helps when you want to extend a cable run to reach a new mounting location without replacing the entire length.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically check the connection in areas that see vibration, and re-secure the cable supports if needed. If the joint is in a locker or console that can get damp, inspect for corrosion and address the source of moisture before it impacts signal quality.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269504463029,"sku":"QBP867647","price":2.83,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300224_qbp867647.jpg?v=1771544334"},{"product_id":"qbp884355","title":"Vimar E10 Incandescent Lamp, 24V, 2W, 10x28mm, White Light","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14771 is a miniature E10 incandescent replacement lamp for illuminated switch modules and small indicator points on board, where a simple filament bulb is still the right fit. It is rated 24 V and 2 W, with a 10 x 28 mm envelope that fits tight switch plates, panel stations, and compact pilot-light housings.\u003c\/p\u003e\u003cp\u003eThis lamp emits white light and uses the common E10 screw base, so it can replace other E10 bulbs as long as the voltage, wattage, and physical size match your holder. On boats with 24 V service, it is typically used for backlit rocker switches, nav station panels, or equipment status lights where you want clean, readable illumination without worrying about polarity.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eE10 screw base for standard miniature lamp holders\u003c\/li\u003e\n\u003cli\u003e24 V, 2 W rating for 24 V indicator and backlighting circuits\u003c\/li\u003e\n\u003cli\u003e10 x 28 mm lamp size to suit compact switch and pilot-light spaces\u003c\/li\u003e\n\u003cli\u003eWhite light output for clear switch and label illumination\u003c\/li\u003e\n\u003cli\u003eIncandescent filament lamp style, so installation orientation does not matter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMatch three things before ordering: base type (E10), rated voltage (24 V), and the 10 x 28 mm size. If your current lamp is taller, shorter, or a different diameter, it can interfere with switch mechanisms or lens diffusers even when the base is the same.\u003c\/p\u003e\u003cp\u003eThis format is commonly used in modular switching systems that accept E10 illumination lamps, and it also fits other E10 holders where the same voltage and wattage are specified.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eIsolate power to the circuit, then remove the lens or device cover that provides access to the lamp holder. Thread the bulb in gently until it seats, then reassemble and test. Avoid overtightening, especially in small plastic holders.\u003c\/p\u003e\u003cp\u003eAfter installation, confirm the lamp is not touching adjacent parts and that any diffuser or light window sits flat, so vibration does not work the bulb loose over time.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a straightforward match for boats running 24 V service that still use incandescent switch illumination, including cruising sailboats, larger powerboats, and commercial installations with legacy panels. It also makes sense as a spare if your electrical panel relies on the same E10, 24 V, 2 W lamp for night readability.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep spares aboard if your switches depend on lamp illumination for night operation. If a lamp fails early, check for sustained overvoltage on the circuit and for moisture intrusion around the device cover.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269539983541,"sku":"QBP884355","price":6.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300443_qbp884355.jpg?v=1771544494"},{"product_id":"qbp884421","title":"Vimar E10 10x28 mm Incandescent Lamp, 220V, 3W, White Light","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14777 is an E10 screw-base incandescent replacement lamp in a 10 x 28 mm format, rated 220 V~ and 3 W, for use in Vimar wiring devices that take this style of indicator or backlight lamp.\u003c\/p\u003e\u003cp\u003eOn a boat it commonly sits behind an illuminated switch, pilot light, or small indicator window on 220 to 230 VAC circuits fed by shore power or an inverter. It is not a 12 V or 24 V lamp, so it only applies where the switching or indicator device is actually mains voltage.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eE10 screw base with a 10 x 28 mm lamp body for a direct physical match in compatible devices.\u003c\/li\u003e\n\u003cli\u003e220 V~ AC, 3 W rating suited to mains-voltage indicator and backlight applications.\u003c\/li\u003e\n\u003cli\u003eWhite incandescent light for clear status indication and switch backlighting.\u003c\/li\u003e\n\u003cli\u003eScrew-in replacement when the existing lamp is the same E10 10 x 28 mm style.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eConfirm the old lamp has an E10 screw base and the same 10 x 28 mm size before ordering. If your switch or indicator uses a plug-in neon, an LED module, or a different base, this lamp will not fit.\u003c\/p\u003e\u003cp\u003eMatch the supply voltage of the device as well. This lamp is for 220 to 230 VAC use, not low-voltage DC circuits.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eIsolate power at the breaker, then access the lamp holder as your device allows and unscrew the old lamp. Screw the new lamp in until it seats, without overtightening, then restore power and confirm illumination.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis replacement lamp suits yachts and vessels that use Vimar-style interior switching where illuminated rockers and indicator windows are used in cabins, heads, and service spaces on 220 to 230 VAC circuits.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eInstall it inside an enclosed device where it stays protected from spray and washdowns. Keeping a spare on board is practical for boats that see frequent vibration and heavy use of illuminated switches.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269540049077,"sku":"QBP884421","price":7.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300447_qbp884421.jpg?v=1771544496"},{"product_id":"qbp871538","title":"Vimar Screw for Frame Fixing, For Rectangular Mounting Boxes, 24 mm, 100pk, Phillips\/Slotted Head","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM07935.1 is a 24 mm fixing screw with a combined Phillips and slotted head, used to secure supports on rectangular mounting boxes. It is the small piece of hardware that keeps a support seated correctly so devices stay aligned behind the faceplate and don’t shift when you operate switches, outlets, or controls.\u003c\/p\u003e\u003cp\u003eOn a boat, this type of screw is commonly needed during panel work in a helm console, cabin bulkhead, or utility locker where Vimar enclosures and control units are installed. The 24 mm length matters for fit, so it is worth checking that the mounting box and support you are using are the rectangular-box style intended for this screw length.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e24 mm long screw for fixing supports on rectangular mounting boxes\u003c\/li\u003e\n\u003cli\u003eCombined Phillips and slotted head to match the driver you have in hand\u003c\/li\u003e\n\u003cli\u003eMade for system infrastructure work involving enclosures and control-unit mounting\u003c\/li\u003e\n\u003cli\u003eUseful as replacement hardware when a support needs to be resecured after a refit or service visit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis screw is intended for supports that fasten to rectangular mounting boxes. If you are mixing parts from different mounting styles, confirm the box format and that the support is meant to be fixed with a 24 mm screw before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eStart the screw by hand to avoid cross-threading, then tighten until the support is held firmly against the mounting box. The head accepts either a Phillips or a flat-blade driver, which helps when access is limited inside a console or behind a tight trim ring. Avoid over-tightening, especially where plastic mounting boxes or supports are used, so threads and mounting ears stay intact.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a practical match for boat owners and installers doing electrical finishing work where Vimar supports are mounted into rectangular boxes in cabins, helms, or control panels. It is also handy for spares kits when you regularly remove faceplates for inspection or upgrades.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDuring routine panel checks, make sure the support stays snug and that faceplates sit flat without movement. If the installation area sees damp air or occasional spray, keep the panel space clean and dry where possible and re-check the fastener during seasonal maintenance.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269563314357,"sku":"QBP871538","price":0.42,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300304_qbp871538.jpg?v=1771544618"},{"product_id":"qbp871636","title":"Vimar Frame Fixing Screw, 35mm, Cross-Slotted Head, For Rectangular Mounting Boxes","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM07937 is a 35 mm fixing screw used to secure a mounting frame onto a rectangular mounting box. It uses a cross-slotted head so it can be tightened with a common Phillips screwdriver, which helps when you are working inside a helm panel, a distribution box, or a compact electrical enclosure.\u003c\/p\u003e\u003cp\u003eOn a boat, this kind of small hardware matters when you are reworking switches, outlets, and control panels and need the frame to sit square to the box after everything is wired and dressed. Confirm that your frame and rectangular box are the type that use frame-fixing screws and that a 35 mm length will not foul wiring or device bodies behind the panel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e35 mm length for fixing mounting frames on rectangular mounting boxes\u003c\/li\u003e\n\u003cli\u003eCross-slotted head for installation with standard Phillips screwdrivers\u003c\/li\u003e\n\u003cli\u003eUseful replacement when original frame screws are missing after rewiring or refits\u003c\/li\u003e\n\u003cli\u003eSupports clean frame alignment in panels and enclosures when tightened to a snug fit\u003c\/li\u003e\n\u003cli\u003eCompact spare to keep in an onboard electrical kit for quick service work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eStart the screw by hand so it threads smoothly into the box insert, then tighten until the frame is firmly seated and aligned. Stop once the frame is secure, since over-tightening can distort plastic frames or damage threads in the mounting box.\u003c\/p\u003e\u003cp\u003eBefore final tightening, check clearance behind the panel. A 35 mm screw is typically used where shorter screws do not fully engage, but you still want to avoid contacting wiring bundles or the back of installed devices.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis screw fits the kind of work that comes up during helm upgrades, cabin refits, or service on control units where rectangular mounting boxes are used. It is a good match for boat owners who handle their own panel work and for yards that keep spares on hand for ongoing electrical maintenance.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eIn damp lockers or exposed console areas, include fasteners in routine inspections and re-tighten only if needed. If a screw shows corrosion or seizing, replace it rather than forcing it, especially when it threads into embedded inserts.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269563904181,"sku":"QBP871636","price":0.42,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300305_qbp871636.jpg?v=1771544619"},{"product_id":"qbp892974","title":"Vimar Flush-Mount Divider Screen, For V71303-06, 60x50mm, Yellow","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMV71550 is a yellow dividing screen that splits a compatible flush-mount box into electrically separated compartments, helping you keep different circuits organized inside the same enclosure. The divider measures 60 mm wide by 50 mm high and is made to fit Vimar mounting boxes V71303, V71304, V71305, and V71306.\u003c\/p\u003e\u003cp\u003eOn boats, this kind of separation is most useful when a single mounting location needs both higher-current wiring and low-current control or signal wiring. It keeps cable paths distinct, makes terminations easier to access, and helps reduce the chance of accidental cross-over when the box is opened for service later.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Vimar flush-mount boxes V71303, V71304, V71305, and V71306\u003c\/li\u003e\n\u003cli\u003eDivider size: 60 mm (width) x 50 mm (height)\u003c\/li\u003e\n\u003cli\u003eCreates electrically separated compartments inside the same box for cleaner circuit layout\u003c\/li\u003e\n\u003cli\u003eYellow color that stays easy to spot during installation and troubleshooting\u003c\/li\u003e\n\u003cli\u003ePlastic divider that separates wiring paths without adding metal parts inside the box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis divider is intended for the internal divider mount in the listed Vimar boxes, where it sits between cable runs and device wiring space. If you are matching to an existing installation, confirm the mounting box model number on the enclosure before ordering.\u003c\/p\u003e\u003cp\u003eIt is a compartment divider, not a cover or sealing component, so it does not change the enclosure rating of the box. Use proper cable protection, strain relief, and routing practices for the location on board.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the divider into the box before you finalize wire routing and terminations. Run conductors on their respective sides and keep crossings to a minimum so the separation remains meaningful when you service the box later.\u003c\/p\u003e\u003cp\u003eAfter the divider is in place, check that devices and frames still seat fully and that nothing is pinched when the cover plate or mechanism is tightened.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a practical add-on for helm switch areas, cabin control panels, and service points where you want one flush-mount location to handle multiple circuits while keeping them separated inside the box. It suits both refits and new builds where neat wiring and future access matter as much as getting the device mounted today.\u003c\/p\u003e\u003ch6\u003eMaintenance and service\u003c\/h6\u003e\u003cp\u003eThere are no moving parts. During electrical work, verify the divider is still seated correctly and re-route any conductors that have migrated across the partition so the compartments remain separated after the box is closed back up.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269575569589,"sku":"QBP892974","price":0.57,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300622_qbp892974.jpg?v=1771544679"},{"product_id":"qbp893213","title":"Vimar 2-Module Hollow Wall Box Mounting Frame, Centering Template, Horizontal\/Vertical Coupling Joint","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMV71571 is a multifunction accessory for 2-module hollow wall boxes that helps you center the cutout, support the box from the inside of the panel, and link multiple boxes into a clean horizontal or vertical bank. It is a compact part at about 9 x 8 x 0.3 cm and it weighs about 0.00518 kg, so it sits flat behind thin liners and furniture panels without taking up useful depth.\u003c\/p\u003e\u003cp\u003eOn a boat, this is the small piece that keeps a switch or outlet location from looking slightly off when the panel has flex, vibration, or a tight working angle. It is also useful when you are laying out more than one 2-module position and you want the spacing to stay consistent so the finished devices and cover plates line up.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for Vimar 2-module hollow wall box installations, acting as a frame on the inside of the panel\u003c\/li\u003e\n\u003cli\u003eBuilt-in centering template function to help mark and align the opening before you commit to the cut\u003c\/li\u003e\n\u003cli\u003eCoupling joint function for assembling horizontal or vertical banks of 2-module boxes\u003c\/li\u003e\n\u003cli\u003eLow-profile footprint of about 9 x 8 x 0.3 cm for use behind tight cabin liners and joinery panels\u003c\/li\u003e\n\u003cli\u003eLightweight part at about 0.00518 kg, adding support without adding bulk behind the mounting surface\u003c\/li\u003e\n\u003cli\u003eUseful when the mounting surface is a thin bulkhead, liner, or cabinet panel where keeping alignment is the hardest part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eDry-fit the box position behind the panel first, then use the centering template function to lay out the cutout so the device opening lands square and level. After the opening is prepared, the accessory works from the inside of the panel as a support frame for the 2-module box.\u003c\/p\u003e\u003cp\u003eWhen you are creating a switch bank, assemble the boxes as a horizontal or vertical group before pulling final wiring, so the spacing stays consistent and the finished face sits straight. Leave enough service slack so the devices can be removed later without stressing the conductors inside the wall cavity.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis accessory is for Vimar 2-module hollow wall boxes and is commonly paired with round hollow wall box formats such as V71701. Confirm that your installation box is the 2-module hollow wall style and that you have adequate clearance behind the panel for the box depth, wiring bend radius, and any connectors.\u003c\/p\u003e\u003cp\u003eIt is best suited to interior panels and protected locations where hollow wall boxes are used, such as cabin liners, joinery panels, head compartments, and enclosed console areas.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for refits where you are adding new switching points and want them to look straight even on curved or slightly flexible surfaces, and for new builds where you are grouping controls in a tight space at the helm or nav station. It is also helpful when you need multiple 2-module positions to align cleanly across a bulkhead or cabinet face.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269578911925,"sku":"QBP893213","price":2.52,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300625_qbp893213.jpg?v=1771544698"},{"product_id":"qbp893217","title":"Vimar Accessory for 3-Module Hollow Wall Boxes, Frame, Centering Template, Coupling Joint","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMV71573 is a multifunction accessory for installing Vimar 3-module boxes in hollow walls. It serves as a centering template for laying out the cutout and as a coupling joint for assembling horizontal or vertical multi-box banks.\u003c\/p\u003e\u003cp\u003eOn boats, it is most useful behind interior liners, bulkheads, and lightweight panels where you have access to the back side and want the finished plate to sit flush. Once the center grid is removed, the remaining frame can be used as a collar so the box can be secured from the inside and the opening stays neat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for Vimar 3-module hollow-wall boxes to keep module spacing and cutouts consistent\u003c\/li\u003e\n\u003cli\u003eActs as a centering template before cutting the opening\u003c\/li\u003e\n\u003cli\u003eJoins boxes into horizontal or vertical banks using the slotted sides\u003c\/li\u003e\n\u003cli\u003eConverts into an inside collar by removing the center grid for back-side mounting\u003c\/li\u003e\n\u003cli\u003eRigid plastic part that holds its shape while marking, aligning, and fastening\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis accessory is intended for Vimar 3-module boxes used in hollow walls and lightweight partitions. It is a mechanical aid for layout and mounting, and it does not change any electrical ratings of the devices installed in the box.\u003c\/p\u003e\u003cp\u003eConfirm your panel construction supports the fixing method used on your installation, especially in areas subject to vibration. Typical onboard locations include cabin and head bulkheads, interior furniture panels, and console side panels where you want switchgear and outlets to sit square and flush.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePosition the accessory on the panel and use it to mark the cutout and centering points for your cutter or hole saw. After cutting, fit the box and, when mounting from the inside is preferred, remove the center grid with a utility knife or electrician scissors and use the remaining frame as a collar.\u003c\/p\u003e\u003cp\u003eFor multi-gang layouts, connect adjacent boxes using the joining slots, verify alignment, then fasten the boxes so the finished faceplates line up evenly.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a practical choice for installers who need repeatable spacing when several devices share a cover plate, or when a retrofit needs accurate cutouts without widening the opening more than necessary.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269583663285,"sku":"QBP893217","price":2.83,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300630_qbp893217.jpg?v=1771544715"},{"product_id":"qbp893609","title":"Vimar Accessory for 4-Module Hollow Wall Boxes, Frame, Centering Template, Coupling Joint","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMV71574 is a multifunction accessory that serves as a frame, a centring template, and a coupling joint for 4-module installation boxes in hollow walls.\u003c\/p\u003e\u003cp\u003eIt is used on the inside of the wall to keep the box opening and the box position consistent, and it helps when multiple boxes are mounted as a horizontal or vertical bank. On board, that usually means clean, straight switch and outlet rows on thin liners, cabin bulkheads, and helm console panels.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for 4-module (4M) hollow wall box installations\u003c\/li\u003e\n\u003cli\u003eActs as a centring template to help lay out the cutout and keep the opening square\u003c\/li\u003e\n\u003cli\u003eFunctions as a frame on the inner side of the wall during mounting\u003c\/li\u003e\n\u003cli\u003eCoupling joint for aligning boxes in horizontal and vertical bank installations\u003c\/li\u003e\n\u003cli\u003eHelps keep multi-gang layouts straight so cover plates and modules sit evenly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis accessory is intended for Vimar 4-module boxes for hollow walls. Confirm the module size on your box and faceplate system before ordering, since the 4-module format differs from 2-module, 3-module, and larger multi-module hardware.\u003c\/p\u003e\u003cp\u003eIt is used with in-wall style installations where the box clamps to a thin panel. Make sure you have adequate clearance behind the liner or bulkhead for the box depth, wiring bend radius, and any conduits or cable chases.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eDry-fit the accessory on the back side of the panel or liner, mark the cutout using the template function, then cut and deburr before inserting the hollow wall box. When you are installing boxes in a bank, use the coupling feature to keep spacing consistent, then tighten the box clamps evenly so the box stays square in the opening.\u003c\/p\u003e\u003cp\u003eOn boats, take a quick look behind the mounting surface for hidden wiring, hoses, insulation, and structural members. Leaving room for strain relief helps connections stay stable when the boat is pounding or vibrating.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis is a mechanical installation aid, so it does not change the electrical rating of the devices you mount in the box. Keep DC, AC, and data wiring separated where your build requires it, and label conductors so future troubleshooting does not turn into a panel teardown.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eCommon uses include ganging multiple Vimar modules at a helm, creating neat switch rows in the salon or cabin, and adding outlets in a galley or nav station where the wall is a thin liner rather than a solid bulkhead.\u003c\/p\u003e\u003cp\u003eIt is a good match for refits where you want faceplates to sit flat across a multi-box run and for new builds where consistent alignment speeds up finishing work.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eOnce installed it stays hidden behind the plate and devices. If you remove the faceplate for service, check that the boxes remain tight and square, especially in areas that see frequent vibration.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269586612405,"sku":"QBP893609","price":3.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300635_qbp893609.jpg?v=1771544731"},{"product_id":"qbp188347","title":"Vimar LED Signalling Unit, For Axial Switches, 12-24V AC\/DC, 0.1W","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar 00937 LED signalling unit is a low-voltage LED insert for compatible axial switches, with 12-24 V AC\/DC operation and 0.1 W power draw.\u003c\/p\u003e\u003cp\u003eIt adds a visible light point to the switch, which helps when you need to find a control in low light or assign a clear visual meaning to a circuit. On board, that is useful on interior switch panels where Vimar components are already installed and a simple indicator makes the panel easier to read.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12-24 V AC\/DC operating range for low-voltage switch circuits\u003c\/li\u003e\n\u003cli\u003e0.1 W consumption keeps added load very low on the electrical system\u003c\/li\u003e\n\u003cli\u003eBuilt as an LED signalling unit for axial switches\u003c\/li\u003e\n\u003cli\u003eWorks with switch and push button applications that accept this insert type\u003c\/li\u003e\n\u003cli\u003eAvailable in five light colors for circuit identification, status indication, or night-time visibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range is offered in five light-color configurations.\u003c\/p\u003e\u003cp\u003eThe light color changes between variants. The operating range stays at 12-24 V AC\/DC and power draw stays at 0.1 W across the versions listed here.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM00937.W: White light. This gives a neutral indicator that works well for general switch illumination and everyday panel visibility.\u003c\/li\u003e\n\u003cli\u003eVM00937.R: Red light. This is often used where the indicator needs to stand out quickly or mark a specific function on a control panel.\u003c\/li\u003e\n\u003cli\u003eVM00937.B: Light blue light. This gives a cooler color cue where a panel uses color separation between different circuits or control points.\u003c\/li\u003e\n\u003cli\u003eVM00937.G: Green light. This works well where the panel layout uses green to mark normal operation or an active function.\u003c\/li\u003e\n\u003cli\u003eVM00937.A: Amber light. This gives a warmer indicator tone and can help separate one circuit group from others on the same panel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a signalling insert, not a complete switch or a standalone lamp. It is meant for compatible Vimar axial switch assemblies, so the switch body and support hardware need to match this LED unit before ordering. If you are replacing an existing insert on a boat, confirm both the light color and the 12-24 V circuit range.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis unit makes the most sense for boats that already use Vimar switchgear in cabin panels, companionway controls, heads, or utility spaces. It is a practical way to add a visible switch indicator without adding meaningful load to a 12 V or 24 V house system.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":52370946130101,"sku":"QBP188347-V6","price":10.63,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":52370946162869,"sku":"QBP188347-V1","price":10.63,"currency_code":"USD","in_stock":false},{"title":"Green","offer_id":52370946195637,"sku":"QBP188347-V9","price":10.63,"currency_code":"USD","in_stock":false},{"title":"Light Blue","offer_id":52370946228405,"sku":"QBP188347-V5","price":10.63,"currency_code":"USD","in_stock":false},{"title":"Amber","offer_id":52370946261173,"sku":"QBP188347-V4","price":8.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1314855_qbp188347.jpg?v=1774056306"},{"product_id":"qbp182132","title":"Vimar Eikon Cable Outlet with Cord-Grip, 1 Module","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20044 cable outlet is a 1-module cable entry with cord-grip for bringing a cable through an Eikon plate opening in a clean, finished way. It carries CE marking and IMQ certification, and the range is offered in grey, white, and silver finishes to match the surrounding trim.\u003c\/p\u003e\u003cp\u003eOn board, this type of insert is useful where a cable needs to exit neatly from an interior panel, berth area, service locker, or protected helm console. It gives the cable a controlled exit point through an Eikon modular frame instead of leaving an open cutout in the panel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module insert for the Vimar Eikon modular range\u003c\/li\u003e\n\u003cli\u003eCable outlet with built-in cord-grip to hold the cable where it exits the panel\u003c\/li\u003e\n\u003cli\u003eAvailable in grey, white, and silver finishes for matching Eikon trim\u003c\/li\u003e\n\u003cli\u003eListed as a cable entry and suitable for use with surface-mounted boxes for flush-mounted switching equipment\u003c\/li\u003e\n\u003cli\u003eCE marked and IMQ certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in three finish options so the visible outlet can stay consistent with the rest of the Eikon installation.\u003c\/p\u003e\u003cp\u003eThe variation across the listed versions is the finish color. The cable outlet format and 1-module layout remain the same across these options.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20044.B: Color White, similar RAL 9016. This suits installations with white Eikon trim or lighter interior panels where the outlet should blend in visually.\u003c\/li\u003e\n\u003cli\u003eVM20044.N: Color Silver, similar RAL 9022. This corresponds to the Eikon Next look and works well with silver-toned trim and modern helm or cabin finishes.\u003c\/li\u003e\n\u003cli\u003eVM20044: Color Grey, similar RAL 7024. This is the darker option in the range and fits installations built around grey Eikon components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis insert takes one Eikon module position, so it makes sense where the boat already uses the Vimar Eikon system for switches, sockets, or matching accessories. It is not a universal pass-through for unrelated switch ranges, so the frame and mounting arrangement should match the Eikon platform before ordering.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for refits and new builds that use Eikon hardware in cabins, furniture panels, and protected control areas where a cable has to pass through the finish without looking improvised. For exposed spray, washdown zones, or deck penetrations, the installation may call for a sealed cable gland rather than an interior cable outlet.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":52370947276981,"sku":"QBP182132-V5","price":4.56,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":52370947309749,"sku":"QBP182132-V4","price":4.94,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":52370947342517,"sku":"QBP182132-V1","price":4.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1314036_qbp182132.jpg?v=1774056343"},{"product_id":"qbp169615","title":"Vimar Idea Blank Module, Grooved Front, 1 Module, Halogen-Free","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea is a blank module used to close an unused position in a compatible Idea installation. It takes up 1 module, has a grooved front, and uses a built-in mounting method with claw fastening. The housing is thermoplastic, halogen-free, and finished with a matt surface, with overall dimensions of 24.80 mm wide, 50.20 mm high, and 20.50 mm deep.\u003c\/p\u003e\u003cp\u003eThis is a non-powered insert with a nominal voltage of 0 V and no monitoring contact, so its job is panel finishing rather than switching. On a boat, it makes sense when an interior switch bank, cabin panel, or service area already uses Vimar Idea components and one opening needs to be closed off neatly after a refit or a layout change.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module blank insert for unused openings in Vimar Idea modular assemblies\u003c\/li\u003e\n\u003cli\u003eGrooved front to match the look of other Idea controls and accessories\u003c\/li\u003e\n\u003cli\u003eBuilt-in mounting with claw fastening for flush installation in compatible supports\u003c\/li\u003e\n\u003cli\u003eThermoplastic body that is halogen-free with a matt finish\u003c\/li\u003e\n\u003cli\u003e24.80 x 50.20 x 20.50 mm size for compact panel layouts\u003c\/li\u003e\n\u003cli\u003eLabel space or information surface present on the module\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two color configurations within the same Idea 1-module format.\u003c\/p\u003e\u003cp\u003eThe difference between variants is the front color. The module size, grooved front style, thermoplastic construction, halogen-free composition, matt finish, and built-in claw mounting remain the same across both versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e16540, Color Gray. This version matches grey Idea installations and corresponds to a RAL 7015-like shade.\u003c\/li\u003e\n\u003cli\u003e16540.B, Color Ivory. This lighter version corresponds to a RAL 9001-like shade and suits panels finished in the ivory or white side of the Idea range.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis module is made for the Vimar Idea system and fills one module position, so fit depends on the surrounding frame and support already belonging to that range. It is useful when a switch, outlet, or control point has been removed and the opening needs a finished closure without changing the rest of the panel layout.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eIt suits installers and boat owners tidying up an existing interior electrical panel, or leaving a reserved position closed until another Idea module is added later. In practical terms, it keeps the panel face consistent and avoids leaving an exposed opening in places such as cabins, consoles, and service spaces where Idea modular hardware is already in use.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Gray","offer_id":52370959663285,"sku":"QBP169615-V3","price":2.26,"currency_code":"USD","in_stock":true},{"title":"Ivory","offer_id":52370959696053,"sku":"QBP169615-V5","price":2.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1314973_qbp169615.jpg?v=1774056694"},{"product_id":"qbp913314","title":"Vimar LED Signalling Unit, For Axial Switches, 110-250V, 50\/60 Hz, 0.3W","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Vimar LED signalling unit is a 110-250V, 50\/60 Hz, 0.3W insert for axial switches and switch or push-button applications. It adds a built-in LED light at the switch point, which helps the control stand out in low light on AC circuits that use this insert format.\u003c\/p\u003e\u003cp\u003eOn board, it makes the most sense in cabin, passageway, galley, or service-area switch positions that already use Vimar axial controls. The range comes in five LED colors, so panel indication can stay consistent across the boat without changing the electrical rating of the insert.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e110-250V AC, 50\/60 Hz operating range for mains-voltage switch circuits\u003c\/li\u003e\n\u003cli\u003e0.3W LED insert with built-in light source\u003c\/li\u003e\n\u003cli\u003eMade for axial switches and used on switch or push-button control points\u003c\/li\u003e\n\u003cli\u003eAvailable in light blue, white, amber, green, and red\u003c\/li\u003e\n\u003cli\u003eListed variants keep the same electrical rating and change only the LED color\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple color configurations under the same LED signalling unit range.\u003c\/p\u003e\u003cp\u003eAcross the listed variants, the change is the LED color. The 110-250V, 50\/60 Hz, 0.3W axial-switch format stays the same.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM00938.B: light blue LED. This version gives the switch a cooler-looking indicator that is easy to distinguish from warmer panel lights.\u003c\/li\u003e\n\u003cli\u003eVM00938.W: white LED. This keeps the indication neutral on panels that use a standard white locator light.\u003c\/li\u003e\n\u003cli\u003eVM00938.A: amber LED. This adds a warmer visual cue on panels where amber is part of the existing color coding.\u003c\/li\u003e\n\u003cli\u003eVM00938.G: green LED. This suits panels that already use green as the visual code for a given circuit or control point.\u003c\/li\u003e\n\u003cli\u003eVM00938.R: red LED. This gives a strong color contrast where red is used as a distinct panel marker.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is an insert for axial switchgear, not a standalone panel lamp and not a low-voltage indicator. Before ordering, match the insert format already in the switch and make sure the circuit is a 110-250V AC application rather than a 12V or 24V DC system.\u003c\/p\u003e\u003cp\u003eIt works well for refits, repairs, or color standardization on boats that already use Vimar axial switchgear in interior spaces. Where the installation mixes switch families or system voltages, checking the existing insert first helps avoid a mismatch.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eWiring method matters with these signalling units. Series wiring is used with incandescent or halogen loads; when the controlled circuit uses other lamp types, the connection method should be checked against the circuit layout before installation.\u003c\/p\u003e\u003cp\u003eThe unit sits within the switch assembly, so protection comes from the surrounding switch location rather than from the insert itself. For boat installations, that usually points to interior panels and other sheltered positions instead of exposed spray areas.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Light Blue","offer_id":52370976440501,"sku":"QBP913314-6","price":9.26,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":52370976473269,"sku":"QBP913314-9","price":9.26,"currency_code":"USD","in_stock":false},{"title":"Amber","offer_id":52370976506037,"sku":"QBP913314-1","price":7.41,"currency_code":"USD","in_stock":false},{"title":"Green","offer_id":52370976538805,"sku":"QBP913314-2","price":7.41,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":52370976571573,"sku":"QBP913314-5","price":7.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1316124_qbp913314.jpg?v=1774057231"},{"product_id":"qbp397941","title":"Vimar LED Signalling Unit, 12-24V AC\/DC, 0.1W, For Switch\/Push Button","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Vimar LED signalling unit is a low-voltage insert for compatible rocker switches and push buttons, with a 12-24 V AC\/DC input and a 0.1 W draw. It works as a built-in indicator or locator light inside the switch assembly, not as a standalone lamp.\u003c\/p\u003e\u003cp\u003eFor boat panels, that makes it useful where you want a visible switch indication without adding much load to a 12V or 24V electrical system. It is used with traditional Vimar switch ranges including 8000, Plana, Idea, Arké, Linea, and Eikon, which matters when you are replacing a failed insert or keeping an existing panel layout consistent.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12-24 V AC\/DC operation for low-voltage circuits, including common 12V and 24V onboard systems\u003c\/li\u003e\n\u003cli\u003e0.1 W power draw keeps indicator lighting load low on switch panels\u003c\/li\u003e\n\u003cli\u003eLED insert format for compatible rocker switches and push buttons rather than a separate panel light\u003c\/li\u003e\n\u003cli\u003eAvailable in amber, light blue, green, red, and white for panel color coding or visual differentiation\u003c\/li\u003e\n\u003cli\u003eFits traditional Vimar ranges including 8000, Plana, Idea, Arké, Linea, and Eikon\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple light-color configurations.\u003c\/p\u003e\u003cp\u003eAcross the listed variants, the light color changes while the 12-24 V AC\/DC rating and 0.1 W consumption stay the same. That lets you match the indicator color to the switch function or the look of the panel without changing the electrical requirement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM00935.G: green light. Green gives a clear indication on a switch panel and keeps this version visually distinct from warning colors such as red or amber.\u003c\/li\u003e\n\u003cli\u003eVM00935.A: amber light. Amber reads warmer and more subdued, which can suit panel locations where you want an indicator that is noticeable without looking harsh.\u003c\/li\u003e\n\u003cli\u003eVM00935.W: white light. White keeps the appearance neutral and works well when the goal is simple switch visibility in low light.\u003c\/li\u003e\n\u003cli\u003eVM00935.B: light blue light. Light blue gives the panel a cooler visual tone and separates this variant from the more conventional status-light colors.\u003c\/li\u003e\n\u003cli\u003eVM00935.R: red light. Red draws attention quickly and is often preferred where the switch indication needs stronger visual emphasis.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis unit is intended for compatible Vimar rocker controls, so it is worth matching the switch family before ordering. It is not a general-purpose courtesy light or navigation light, and it does not replace a full lamp assembly.\u003c\/p\u003e\u003cp\u003eIt is a good match for refits and service replacements on boats that already use Vimar switch hardware, especially when the panel needs a specific indicator color for circuit identification. It also suits new switch panels that need a low-draw visual cue built into the switch itself.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Green","offer_id":52371034210485,"sku":"QBP397941-V1","price":8.64,"currency_code":"USD","in_stock":false},{"title":"Amber","offer_id":52371034243253,"sku":"QBP397941-V2","price":8.64,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":52371034276021,"sku":"QBP397941-V3","price":8.64,"currency_code":"USD","in_stock":true},{"title":"Light Blue","offer_id":52371034308789,"sku":"QBP397941-V4","price":8.64,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":52371034341557,"sku":"QBP397941-V5","price":8.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1317640_qbp397941.jpg?v=1774057954"},{"product_id":"qbp472644","title":"Vimar EIKON Symbol Sticker Sheets, For Eikon Tactil Controls","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar EIKON Series is a range of adhesive sticker sheets for customizing Eikon Tactil controls with function symbols and wording. Across the range, the labels come in grey similar to RAL 7024, use non-transparent sticker material, and are offered in 1-sheet, 4-sheet, or 8-sheet packs depending on the configuration.\u003c\/p\u003e\u003cp\u003eOn board, these sheets are used to make control points easier to identify in cabins, guest spaces, and general switching locations where Eikon Tactil hardware is already installed. This is a labeling accessory rather than a powered component, so fit comes down to the correct Eikon Tactil control family and the legend set that matches the functions you need.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for customizing Vimar Eikon Tactil controls with adhesive labels for function identification\u003c\/li\u003e\n\u003cli\u003eGrey finish similar to RAL 7024 for a close visual match with dark control surfaces\u003c\/li\u003e\n\u003cli\u003eAvailable across the range in 1-sheet, 4-sheet, and 8-sheet configurations\u003c\/li\u003e\n\u003cli\u003eLegend sets vary by version and cover standard functions, room and cabin functions, and customized functions\u003c\/li\u003e\n\u003cli\u003eNon-transparent sticker material with printed symbols and wording for clear visual labeling\u003c\/li\u003e\n\u003cli\u003eNo tactile imprint, which keeps the control face flat after the label is applied\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range changes mainly in sheet count and the type of legend set supplied. Available configurations cover 1-sheet, 4-sheet, and 8-sheet packs, with versions arranged around standard-function labels, room and cabin labels, and customized labels for special functions.\u003c\/p\u003e\u003cp\u003eWithin the family, the format stays tied to Eikon Tactil controls and the same grey sticker material. The main decision point is whether the panel needs standard legends, room or cabin legends, or a custom-function sheet, along with how many sheets are needed for the number of control points on board.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThese sticker sheets are intended for Eikon Tactil controls. They suit refits and new installations where that control line is already in use and the switch interface needs clearer labeling for crew, guests, or service staff. They do not change the electrical rating or function of the control behind them, so vessel voltage and network type are not the fit issue here.\u003c\/p\u003e\u003ch6\u003eInstallation and onboard use\u003c\/h6\u003e\u003cp\u003eOnce the correct legend set is selected, the labels keep cabin functions and standard switching points easier to understand at a glance. That is especially useful in shared spaces where lighting or room controls need to stay clear for people who are not familiar with the boat.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"8 Sheets \/ Domestic Symbols","offer_id":52371060195509,"sku":"QBP472644-V1","price":91.2,"currency_code":"USD","in_stock":false},{"title":"4 Sheets \/ Symbols \u0026 LighTable","offer_id":52371060228277,"sku":"QBP472644-V2","price":49.1,"currency_code":"USD","in_stock":false},{"title":"4 Sheets \/ Domestic Symbols","offer_id":52371060261045,"sku":"QBP472644-V3","price":49.1,"currency_code":"USD","in_stock":true},{"title":"4 Sheets \/ Room \u0026 Cabin","offer_id":52371060293813,"sku":"QBP472644-V4","price":45.36,"currency_code":"USD","in_stock":false},{"title":"8 Sheets \/ Symbols \u0026 Words","offer_id":52371060326581,"sku":"QBP472644-V5","price":91.2,"currency_code":"USD","in_stock":false},{"title":"4 Sheets \/ Symbols \u0026 Words","offer_id":52371060359349,"sku":"QBP472644-V6","price":45.36,"currency_code":"USD","in_stock":false},{"title":"1 Sheet \/ Domestic Symbols","offer_id":52371060392117,"sku":"QBP472644-V7","price":33.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1319679_qbp472644.webp?v=1774058467"},{"product_id":"qbp181330","title":"Vimar Eikon Blank Module, 1 Module, Flush Mount, Halogen-Free","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20041 Blank Module is a 1-module blank insert for closing an unused opening in a flush-mounted Eikon switch or outlet assembly. It has a 22.30 x 49.00 x 20.50 mm body, built-in mounting, and claw fastening, so it sits in the same modular layout as the active devices around it rather than leaving an open space in the panel.\u003c\/p\u003e\u003cp\u003eThis is a non-electrical component with nominal voltage listed at 0 V, so its job is purely to finish the layout and keep the face of the panel clean and consistent. The body is thermoplastic, halogen-free, and finished in matte white, grey, or silver depending on the variant. On board, it makes sense anywhere a helm panel, cabin switch bank, or interior control point has an unused 1-module position that still needs a finished look.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module blank insert for unused openings in Vimar Eikon modular assemblies\u003c\/li\u003e\n\u003cli\u003eBody size of 22.30 x 49.00 x 20.50 mm for standard 1-module fit within the range\u003c\/li\u003e\n\u003cli\u003eBuilt-in mounting with claw fastening for flush-mounted installations\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction that is halogen-free\u003c\/li\u003e\n\u003cli\u003eMatte front surface with label space on the module face\u003c\/li\u003e\n\u003cli\u003eNon-electrical insert with nominal voltage 0 V and no monitoring contact\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple colour configurations within the same 1-module blank insert format.\u003c\/p\u003e\u003cp\u003eAcross the range, the size, 1-module layout, built-in mounting, claw fastening, thermoplastic body, halogen-free construction, matte appearance, and front label surface stay consistent. The main difference is the visible finish, with white, grey, and silver options for matching nearby plates and devices.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20041.B: White. This version keeps the panel light in appearance and suits layouts built around white Eikon plates and devices.\u003c\/li\u003e\n\u003cli\u003eVM20041: Grey. This version matches grey Eikon layouts and keeps unused module positions visually consistent with darker switch panels.\u003c\/li\u003e\n\u003cli\u003eVM20041.N: Silver. This version uses the silver Next finish for installations built around silver-toned Eikon trim and devices.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis blank module is a good match for installations that already use the Vimar Eikon modular system and need to close a spare 1-module opening without changing the frame layout. It is most useful during refits, when a device has been removed, or when extra module space is being left available for later expansion.\u003c\/p\u003e\u003cp\u003eBefore ordering, check the series, module count, and panel finish already on the boat. The blank module matches the Eikon family and fits a single module position, so it should be paired with the correct Eikon support and cover plate arrangement already in the panel.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBecause this is a built-in insert with claw fastening, it is suited to flush panel work where you want the face of the assembly to stay neat and even. There is no circuit function to wire, which makes it a straightforward way to finish a panel opening while keeping access to the same modular layout for future changes.\u003c\/p\u003e\u003cp\u003eIt is a sensible option for boat owners, installers, and yards tidying up helm stations, cabin switch banks, or interior panels after equipment changes. It also works when a new panel is being built in stages and one module position needs to stay closed until another device is added later.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":52371082870965,"sku":"QBP181330-V0","price":2.47,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":52371082903733,"sku":"QBP181330-V7","price":2.47,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":52371082936501,"sku":"QBP181330-V5","price":3.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1314211_qbp181330.jpg?v=1774059089"},{"product_id":"qbp181345","title":"Vimar Eikon 2-Module Blank Module, Flush Mount, Halogen-Free Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20042 blank module is a 2-module cover insert for closing an unused position in a Vimar Eikon modular installation. It has no switching or outlet function, so it is used when a panel opening needs a neat finish while the surrounding frame and layout stay in place.\u003c\/p\u003e\u003cp\u003eIt measures 44.7 x 49.0 x 20.5 mm and is made from halogen-free thermoplastic with a matt surface. Built-in mounting with claw fastening makes it suited to refits, spare positions left for future equipment, or panels where a removed control needs to be covered without changing the rest of the assembly. The front also includes space for identification.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module blanking insert for unused positions in a Vimar Eikon modular panel\u003c\/li\u003e\n\u003cli\u003eNo electrical or control function, used to close a spare opening cleanly\u003c\/li\u003e\n\u003cli\u003eBuilt-in mounting format with claw fastening\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic construction with a matt finish\u003c\/li\u003e\n\u003cli\u003eFront label space for panel identification\u003c\/li\u003e\n\u003cli\u003eCompact 44.7 x 49.0 x 20.5 mm size\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range is offered in three color configurations for the same 2-module blank module format.\u003c\/p\u003e\u003cp\u003eWhat changes between variants is the front color. The 2-module footprint, mounting method, material type, and basic dimensions stay the same across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20042.B: Color White. This version suits panels and trim pieces that use a white Eikon finish.\u003c\/li\u003e\n\u003cli\u003eVM20042.N: Color Silver. This version matches installations that use the silver Eikon look around the module.\u003c\/li\u003e\n\u003cli\u003eVM20042: Color Grey. This version keeps the darker grey appearance used in matching Eikon panel layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis module is intended for Vimar Eikon systems and occupies one 2-module position within that range. It is a straightforward fit when the surrounding frame and support are already set up for Eikon modular devices.\u003c\/p\u003e\u003cp\u003eOn board, it makes the most sense in protected helm, cabin, or utility panels where a spare position needs to be closed off neatly for now or kept available for a later upgrade.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eBecause it is a built-in module with claw fastening, it is best used where the panel cutout and support hardware already match the Eikon format. That makes it useful during refits when one opening is being left unused after a system change or when a panel layout is being cleaned up without replacing the whole plate.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":52371082969269,"sku":"QBP181345-V3","price":3.86,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":52371083002037,"sku":"QBP181345-V5","price":4.06,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":52371083034805,"sku":"QBP181345-V4","price":3.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1314223_qbp181345.jpg?v=1774059093"},{"product_id":"qbp181714","title":"Vimar Eikon Cable Outlet, 20A 250V, 2P+E Terminal Bar, 2 Modules","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20046 is a 2-module cable outlet with a 2P+E 20 A 250 V terminal bar, made for fixed cable connections within the Vimar Eikon wiring range. It is the kind of part used when a cable needs to exit cleanly through a finished wall plate or panel position instead of leaving an open pass-through or fitting a socket outlet.\u003c\/p\u003e\u003cp\u003eOn a boat, this style of accessory makes sense where concealed wiring runs behind a switch panel, cabin bulkhead, furniture module, or service area and a neat front finish is still important. The 2-module format matters when you are matching existing Eikon frames and plates, and the terminal bar matters when the cable needs a proper rear connection point rather than a loose exit only.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2P+E terminal bar rated 20 A at 250 V for fixed cable connections\u003c\/li\u003e\n\u003cli\u003e2-module Eikon format for use with matching frames, plates, and mounting arrangements\u003c\/li\u003e\n\u003cli\u003eCable outlet layout gives the cable a clean exit through the finished front\u003c\/li\u003e\n\u003cli\u003eAvailable in grey, white, and silver-toned versions within the same product family\u003c\/li\u003e\n\u003cli\u003eBuilt as a cable entry accessory rather than a plug-in socket outlet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product family is offered in three finish options.\u003c\/p\u003e\u003cp\u003eAcross the listed variants, the visible finish changes while the core configuration stays the same: each version is an Eikon 2-module cable outlet with a 2P+E 20 A 250 V terminal bar.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20046.N: Silver finish. This version suits installations that already use Eikon Next trim or other metallic-looking switch details on the surrounding panel.\u003c\/li\u003e\n\u003cli\u003eVM20046.B: White finish. This keeps the cable outlet visually lighter in cabins, heads, or interior panels where white switching hardware is already in place.\u003c\/li\u003e\n\u003cli\u003eVM20046: Grey finish. The grey version is similar to RAL 7024, which helps it sit closer to darker technical panels and equipment surrounds.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, check that the installation is based on the Vimar Eikon system and that the opening is for a 2-module device. This part is meant to work as one element within a matching frame, box, and cover plate setup, so the key buying check is system compatibility as much as the electrical rating.\u003c\/p\u003e\u003cp\u003eThis is a good match for boats already fitted with Vimar Eikon switching and needing a tidy cable exit point with rear terminal-bar connection. It works where the wiring is meant to stay hidden behind the panel and the finished front still needs to look consistent with the rest of the electrical accessories.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Silver","offer_id":52371085099189,"sku":"QBP181714-V2","price":25.65,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":52371085131957,"sku":"QBP181714-V6","price":24.94,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":52371085164725,"sku":"QBP181714-V1","price":26.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1314724_qbp181714.jpg?v=1774059108"},{"product_id":"qbp181776","title":"Vimar Eikon Cable Outlet with Terminal Bar, For Square Mounting British Standard Boxes, 2P+T, 45A, 250V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon is a cable outlet with a 2P+T 45 A 250 V terminal bar for square British standard mounting boxes. It is a flush, fixed cable entry point with a built-in mounting frame and cover, so the cable exit stays neat on the finished face while the termination stays behind the unit.\u003c\/p\u003e\u003cp\u003eOn board, this suits protected interior spaces where a hard-wired cable needs to pass through a finished panel without using a plug socket, such as cabins, galleys, service areas, or helm interiors that already use the Eikon system. The terminal bar is rated 45 A at 250 V 50\/60 Hz and accepts flexible cables from 4 mm² to 10 mm².\u003c\/p\u003e\u003cp\u003eThis is an ordinary IPX0 device, so it belongs in a dry installation area rather than an exposed deck, wet locker, or washdown zone. Across this range, the electrical format stays the same and the visible change is the finish.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2P+T terminal bar rated 45 A, 250 V, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eBuilt-in mounting frame and cover for a cleaner finished face\u003c\/li\u003e\n\u003cli\u003eFits square British standard mounting boxes\u003c\/li\u003e\n\u003cli\u003eFlush, fixed cable entry with provision for earthing\u003c\/li\u003e\n\u003cli\u003eAccepts flexible cables from 4 mm² to 10 mm²\u003c\/li\u003e\n\u003cli\u003eOrdinary IPX0 construction for protected interior locations\u003c\/li\u003e\n\u003cli\u003eCE marked and ASTA certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in three finish options within the same Eikon cable outlet format.\u003c\/p\u003e\u003cp\u003eThe listed variants change the visible color. The 45 A, 250 V, 2P+T terminal bar, the built-in mounting frame and cover, and the square British standard box format remain the same across the versions shown here.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20047.B: Color White. This version keeps the same electrical layout with a light finish that blends into white switch panels and cabin interiors.\u003c\/li\u003e\n\u003cli\u003eVM20047.N: Color Silver. This version uses the same outlet format with a silver toned face that suits modern instrument panels and metallic trim.\u003c\/li\u003e\n\u003cli\u003eVM20047: Color Grey. This version keeps the same fit and rating with a darker face that works well where existing Eikon devices are already in grey.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis outlet is not a general-purpose deck gland or a weatherproof exterior fitting. It is part of the Vimar Eikon switching range and makes sense where the boat already uses square British standard boxes and matching interior electrical trim.\u003c\/p\u003e\u003cp\u003eBefore ordering, check the mounting box format, the cable size, and the installation zone. For a vessel refit, it is a good match when the goal is to pass a fixed cable through a finished panel and land it on a 45 A terminal bar without breaking the look of the surrounding switchgear.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis works well for interior AC distribution points where a cable must exit cleanly from a panel to feed a fixed appliance or another hard-wired load. It is most relevant on yachts, cruisers, and other boats with finished accommodation spaces rather than open utility areas that take direct spray.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":52371085197493,"sku":"QBP181776-V1","price":31.59,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":52371085230261,"sku":"QBP181776-V6","price":33.25,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":52371085263029,"sku":"QBP181776-V4","price":34.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1315706_qbp181776.jpg?v=1774059113"},{"product_id":"qbp169776","title":"Vimar Idea Blank Module, Smooth Front, 1 Module, Thermoplastic, Halogen-Free","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea smooth-front blank module is a 1-module filler for unused openings in Vimar Idea built-in switch panels. It has a matt thermoplastic front, uses claw fastening, and measures 24.80 x 50.20 x 20.50 mm.\u003c\/p\u003e\u003cp\u003eThis is a 0 V accessory rather than an active electrical device, so its job is to close a spare position and keep the panel layout consistent. On boats that already use Vimar Idea hardware, it is a straightforward way to finish an open module space during a refit or leave room for a future circuit without mixing series or panel finishes.\u003c\/p\u003e\u003cp\u003eThe body is halogen-free and includes a label space or information surface. That makes it useful when you want a blank position that still sits neatly within a larger switching layout and can be identified later if the panel plan changes.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module blank module for the Vimar Idea system\u003c\/li\u003e\n\u003cli\u003eSmooth matt front for a clean, flush panel appearance\u003c\/li\u003e\n\u003cli\u003e24.80 mm width, 50.20 mm height, and 20.50 mm depth\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction with halogen-free material\u003c\/li\u003e\n\u003cli\u003eBuilt-in mounting with claw fastening\u003c\/li\u003e\n\u003cli\u003e0 V accessory with label space or information surface\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two color configurations within the same smooth-front Idea blank module format.\u003c\/p\u003e\u003cp\u003eThe color changes between variants. The listed versions share the same 1-module size, matt thermoplastic body, built-in claw mounting, nominal voltage of 0 V, and 24.80 x 50.20 x 20.50 mm dimensions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16542: Color Gray. This is the darker option for panels built around gray Idea devices and trim.\u003c\/li\u003e\n\u003cli\u003eVM16542.B: Color Ivory. This is the lighter option for panels that use a pale front finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCheck the rest of the panel hardware before ordering. This module fits the Vimar Idea range in a single-module built-in position, so it is there to match existing Idea frames, supports, and cover plates rather than substitute for other Vimar series.\u003c\/p\u003e\u003cp\u003eIt suits refit work on boats that already use Vimar Idea switchgear in cabins, heads, utility spaces, and other protected panel locations. It also makes sense when a device position has been left spare for future expansion or when an old module has been removed and the opening still needs a neat finish.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Gray","offer_id":52371089817781,"sku":"QBP169776-V7","price":2.26,"currency_code":"USD","in_stock":true},{"title":"Ivory","offer_id":52371089850549,"sku":"QBP169776-V5","price":2.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1314229_qbp169776.jpg?v=1774059268"},{"product_id":"qbp169904","title":"Vimar Idea Cable Outlet, Cord-Grip, 1 Module","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea 16541 cable outlet is a 1-module plastic outlet with cord-grip for routing a cable through an Idea modular plate. It creates a clean cable exit point at the faceplate instead of letting the cable pass under the edge of the trim, and the unit itself is compact at about 2.5 x 5 x 2 cm.\u003c\/p\u003e\u003cp\u003eThis range is used with surface-mounted boxes for flush-mounted switching equipment, so it makes sense when a boat already uses Vimar Idea modular accessories at the helm, in the cabin, or at another protected interior panel. This parent listing covers two finish options, grey and ivory, with the same basic cable outlet format.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module cable outlet with integrated cord-grip for the Vimar Idea modular range\u003c\/li\u003e\n\u003cli\u003eCompact body around 2.5 x 5 x 2 cm, which helps when panel space is limited\u003c\/li\u003e\n\u003cli\u003eSuitable for surface-mounted boxes used with flush-mounted switching equipment\u003c\/li\u003e\n\u003cli\u003eAvailable in grey or ivory to match surrounding Idea trim and switchgear\u003c\/li\u003e\n\u003cli\u003eCE marked and IMQ certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two color configurations within the same cable outlet format.\u003c\/p\u003e\u003cp\u003eThe listed versions share the same 1-module layout and cord-grip function. The visible difference between them is color, which matters when you are matching existing Idea plates and trim on board.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e16541.B: Color Ivory. This off-white tone sits closer to light panels and classic interior trim.\u003c\/li\u003e\n\u003cli\u003e16541: Color Gray. This darker finish lines up better with grey Idea accessories and darker panel surrounds.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis outlet is meant for a modular plate layout where one position is used as a cable pass-through rather than a switch or receptacle. It works best where the rest of the installation already uses Vimar Idea components and the cable needs to exit through the faceplate in a tidy way.\u003c\/p\u003e\u003cp\u003eOn board, that usually points to interior switch areas and equipment panels rather than standalone through-panel hardware. It is a sensible match for refits and replacements where keeping the finish consistent with existing Idea trim matters as much as the cable exit itself.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Ivory","offer_id":52371089883317,"sku":"QBP169904-V5","price":4.88,"currency_code":"USD","in_stock":false},{"title":"Gray","offer_id":52371089916085,"sku":"QBP169904-V9","price":4.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1314240_qbp169904.jpg?v=1774059271"},{"product_id":"qbp531432","title":"Vimar LED Signalling Unit, For Plana, Arké, Linea, Eikon and Idea Illuminable Rocker Switches","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Vimar LED signalling unit is an indicator insert for compatible switch and push-button assemblies where you need a clear status light on an onboard panel. Across this range, the electrical options cover 5 V a.c.\/d.c. at 0.01 W, 120 V 50\/60 Hz at 0.2 W, and 250 V 50\/60 Hz at 0.35 W, with light blue, amber, green, red, and white versions available.\u003c\/p\u003e\u003cp\u003eIt is used as a small visual indicator rather than a general light source, which makes it a practical fit for helm, cabin, galley, and service-area switch panels where crew need to confirm a circuit state at a glance. This is an illumination insert for switch or push-button applications, so fit depends on using a compatible device that accepts this type of signalling insert.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLED signalling insert for switch and push-button applications\u003c\/li\u003e\n\u003cli\u003eVariant family covers 5 V a.c.\/d.c. 0.01 W, 120 V 50\/60 Hz 0.2 W, and 250 V 50\/60 Hz 0.35 W\u003c\/li\u003e\n\u003cli\u003eColor options in this range include light blue, amber, green, red, and white\u003c\/li\u003e\n\u003cli\u003eCan be wired in-line with the load when used with incandescent or halogen lamps\u003c\/li\u003e\n\u003cli\u003eCan be wired in parallel with the load for other lamp types, or connected directly to the main supply when a constant indicator is needed\u003c\/li\u003e\n\u003cli\u003eIntegrated LED light source built into the insert\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations. Across the range, the changing points are indicator color and electrical rating.\u003c\/p\u003e\u003cp\u003eThe 5 V versions are rated at 0.01 W and operate on a.c. or d.c. The 120 V versions are rated at 0.2 W at 50\/60 Hz, and the 250 V versions are rated at 0.35 W at 50\/60 Hz. Color options in this family include light blue, amber, green, red, and white, which lets the indicator match panel logic or circuit identification on a compatible onboard switch panel.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis unit belongs in a compatible switch or push-button assembly, not as a stand-alone fixture. Before ordering, match the insert to the device family in your panel and confirm both the circuit voltage and the indicator color needed for that position.\u003c\/p\u003e\u003cp\u003eFor marine use, it fits best in protected interior locations such as helm consoles, electrical cabinets, cabin controls, or other enclosed panels where a pilot light helps show power, activation, or circuit status.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eWiring method matters. With incandescent or halogen lamps, the signalling unit is used in-line with the load so the indicator stays off while the controlled lamp is on. With other lamp types, it can be wired in parallel with the load so both illuminate together, or connected directly to the main supply when a permanent indicator is needed.\u003c\/p\u003e\u003cp\u003eThis is a good match for boats that already use compatible Vimar switching hardware and want a tidy indication point without adding a separate lamp body. On mixed-voltage vessels, the variant choice should follow the exact circuit the indicator will monitor.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Amber \/ 120V 0.2W","offer_id":52371115147445,"sku":"QBP531432-V1","price":7.03,"currency_code":"USD","in_stock":false},{"title":"Amber \/ 250V 0.35W","offer_id":52371115180213,"sku":"QBP531432-V2","price":7.61,"currency_code":"USD","in_stock":false},{"title":"Amber \/ 5V 0.01W","offer_id":52371115212981,"sku":"QBP531432-V3","price":7.98,"currency_code":"USD","in_stock":false},{"title":"Green \/ 120V 0.2W","offer_id":52371115245749,"sku":"QBP531432-V4","price":7.61,"currency_code":"USD","in_stock":false},{"title":"Green \/ 250V 0.35W","offer_id":52371115278517,"sku":"QBP531432-V5","price":7.61,"currency_code":"USD","in_stock":false},{"title":"Green \/ 5V 0.01W","offer_id":52371115311285,"sku":"QBP531432-V6","price":7.98,"currency_code":"USD","in_stock":false},{"title":"Red \/ 120V 0.2W","offer_id":52371115344053,"sku":"QBP531432-V7","price":7.61,"currency_code":"USD","in_stock":false},{"title":"Red \/ 250V 0.35W","offer_id":52371115376821,"sku":"QBP531432-V8","price":7.61,"currency_code":"USD","in_stock":false},{"title":"Red \/ 5V 0.01W","offer_id":52371115409589,"sku":"QBP531432-V9","price":7.98,"currency_code":"USD","in_stock":false},{"title":"White \/ 120V 0.2W","offer_id":52371115442357,"sku":"QBP531432-V10","price":7.61,"currency_code":"USD","in_stock":true},{"title":"White \/ 250V 0.35W","offer_id":52371115475125,"sku":"QBP531432-V11","price":7.61,"currency_code":"USD","in_stock":false},{"title":"White \/ 5V 0.01W","offer_id":52371115507893,"sku":"QBP531432-V12","price":7.98,"currency_code":"USD","in_stock":false},{"title":"Light Blue \/ 120V 0.2W","offer_id":52371115540661,"sku":"QBP531432-V13","price":7.61,"currency_code":"USD","in_stock":true},{"title":"Light Blue \/ 250V 0.35W","offer_id":52371115573429,"sku":"QBP531432-V14","price":7.61,"currency_code":"USD","in_stock":false},{"title":"Light Blue \/ 5V 0.01W","offer_id":52371115606197,"sku":"QBP531432-V15","price":7.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1319951_qbp531432.webp?v=1774060181"},{"product_id":"qbp524165","title":"Vimar RJ45 Cat6A S\/FTP Patch Cord, 26 AWG, Orange PVC Sheath","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Vimar RJ45 Cat6A S\/FTP patch cord is a shielded Ethernet patch lead for onboard data links where you need a known cable length and a clean Cat6A connection. Across the range, it is built as a Cat6A (IEC) S\/FTP 4-pair patch cord with an orange PVC outer sheath and lengths from 0.5 m to 5 m.\u003c\/p\u003e\u003cp\u003eOn a boat, it fits short network runs between electronics with RJ45 ports, such as a router, switch, patch panel, or other data hardware mounted at the helm, nav station, or inside an equipment cabinet. The shielded construction is useful where cable runs sit near other onboard wiring and you want a more controlled patch connection than a basic unshielded lead.\u003c\/p\u003e\u003cp\u003eThis family makes the most sense in protected indoor-style locations on board. The range is not listed as oil-resistant or fire-retardant, so it is better suited to enclosed electronics spaces than machinery areas or exposed routing.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCat6A (IEC) S\/FTP 4-pair patch cord for shielded RJ45 Ethernet links\u003c\/li\u003e\n\u003cli\u003eOrange PVC sheath is easy to identify in a console, rack, or wiring cabinet\u003c\/li\u003e\n\u003cli\u003eMoulded anti-kink sleeve adds support where the cable bends most near the connector\u003c\/li\u003e\n\u003cli\u003eAvailable in 0.5 m, 1 m, 2 m, 3 m, and 5 m lengths for short onboard patch runs\u003c\/li\u003e\n\u003cli\u003eBuilt for data and telecommunication cabling where a ready-made shielded lead is preferred over field termination\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis patch cord is offered in multiple lengths to suit different helm layouts, cabinet depths, and equipment spacing on board.\u003c\/p\u003e\u003cp\u003eThe variation across this range is cable length. The Cat6A S\/FTP construction, orange PVC sheath, RJ45 connection format, and moulded anti-kink sleeve remain the same across the listed versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM03022.05: Length 0,5 m. Works where devices sit close together and extra slack would only crowd the installation.\u003c\/li\u003e\n\u003cli\u003eVM03022.1: Length 1 m. Adds a little more routing room inside a helm console, small rack, or nav desk.\u003c\/li\u003e\n\u003cli\u003eVM03022.2: Length 2 m. Covers common links between nearby network components without leaving a long loop to manage.\u003c\/li\u003e\n\u003cli\u003eVM03022.3: Length 3 m. Useful when the cable needs to pass through a panel or make a longer turn inside the installation.\u003c\/li\u003e\n\u003cli\u003eVM03022.5: Length 5 m. Fits longer patch runs between separated electronics positions within the same protected area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a standard RJ45 Cat6A patch lead for equipment that uses Ethernet over twisted-pair cabling. It fits best where you are linking fixed onboard electronics inside dry spaces rather than making a permanent field-terminated run.\u003c\/p\u003e\u003cp\u003eBefore ordering, check the actual cable path and the space behind the equipment so the anti-kink boot can sit naturally without pushing hard against the connector or panel.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eOn smaller boats, the shorter lengths help keep the back of the helm and electronics lockers tidy. The longer versions are more useful where the cable needs to bridge between a switch, router, and patch panel mounted in separate positions within the same compartment.\u003c\/p\u003e\u003cp\u003eThis range is a good match for installers, boatbuilders, and owners who want shielded Ethernet patching for onboard network hardware and who prefer to size the cable to the actual run instead of coiling spare length behind the panel.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"2m","offer_id":52371118555317,"sku":"QBP524165-V1","price":29.69,"currency_code":"USD","in_stock":false},{"title":"1m","offer_id":52371118588085,"sku":"QBP524165-V2","price":20.9,"currency_code":"USD","in_stock":false},{"title":"3m","offer_id":52371118620853,"sku":"QBP524165-V3","price":26.84,"currency_code":"USD","in_stock":false},{"title":"5m","offer_id":52371118653621,"sku":"QBP524165-V4","price":33.01,"currency_code":"USD","in_stock":false},{"title":"0,5m","offer_id":52371118686389,"sku":"QBP524165-V5","price":17.58,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1320053_qbp524165.jpg?v=1774060243"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/accessories.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}